BRepLib_MakeEdge Class Reference

Provides methods to build edges. More...

#include <BRepLib_MakeEdge.hxx>

Inheritance diagram for BRepLib_MakeEdge:

Public Member Functions
	BRepLib_MakeEdge ()
	BRepLib_MakeEdge (const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepLib_MakeEdge (const gp_Pnt &P1, const gp_Pnt &P2)
	BRepLib_MakeEdge (const gp_Lin &L)
	BRepLib_MakeEdge (const gp_Lin &L, const Standard_Real p1, const Standard_Real p2)
	BRepLib_MakeEdge (const gp_Lin &L, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepLib_MakeEdge (const gp_Lin &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepLib_MakeEdge (const gp_Circ &L)
	BRepLib_MakeEdge (const gp_Circ &L, const Standard_Real p1, const Standard_Real p2)
	BRepLib_MakeEdge (const gp_Circ &L, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepLib_MakeEdge (const gp_Circ &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepLib_MakeEdge (const gp_Elips &L)
	BRepLib_MakeEdge (const gp_Elips &L, const Standard_Real p1, const Standard_Real p2)
	BRepLib_MakeEdge (const gp_Elips &L, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepLib_MakeEdge (const gp_Elips &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepLib_MakeEdge (const gp_Hypr &L)
	BRepLib_MakeEdge (const gp_Hypr &L, const Standard_Real p1, const Standard_Real p2)
	BRepLib_MakeEdge (const gp_Hypr &L, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepLib_MakeEdge (const gp_Hypr &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepLib_MakeEdge (const gp_Parab &L)
	BRepLib_MakeEdge (const gp_Parab &L, const Standard_Real p1, const Standard_Real p2)
	BRepLib_MakeEdge (const gp_Parab &L, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepLib_MakeEdge (const gp_Parab &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepLib_MakeEdge (const Handle< Geom_Curve > &L)
	BRepLib_MakeEdge (const Handle< Geom_Curve > &L, const Standard_Real p1, const Standard_Real p2)
	BRepLib_MakeEdge (const Handle< Geom_Curve > &L, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepLib_MakeEdge (const Handle< Geom_Curve > &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepLib_MakeEdge (const Handle< Geom_Curve > &L, const gp_Pnt &P1, const gp_Pnt &P2, const Standard_Real p1, const Standard_Real p2)
	BRepLib_MakeEdge (const Handle< Geom_Curve > &L, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2, const Standard_Real p1, const Standard_Real p2)
	BRepLib_MakeEdge (const Handle< Geom2d_Curve > &L, const Handle< Geom_Surface > &S)
	BRepLib_MakeEdge (const Handle< Geom2d_Curve > &L, const Handle< Geom_Surface > &S, const Standard_Real p1, const Standard_Real p2)
	BRepLib_MakeEdge (const Handle< Geom2d_Curve > &L, const Handle< Geom_Surface > &S, const gp_Pnt &P1, const gp_Pnt &P2)
	BRepLib_MakeEdge (const Handle< Geom2d_Curve > &L, const Handle< Geom_Surface > &S, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
	BRepLib_MakeEdge (const Handle< Geom2d_Curve > &L, const Handle< Geom_Surface > &S, const gp_Pnt &P1, const gp_Pnt &P2, const Standard_Real p1, const Standard_Real p2)
	BRepLib_MakeEdge (const Handle< Geom2d_Curve > &L, const Handle< Geom_Surface > &S, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2, const Standard_Real p1, const Standard_Real p2)
void	Init (const Handle< Geom_Curve > &C)
void	Init (const Handle< Geom_Curve > &C, const Standard_Real p1, const Standard_Real p2)
void	Init (const Handle< Geom_Curve > &C, const gp_Pnt &P1, const gp_Pnt &P2)
void	Init (const Handle< Geom_Curve > &C, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
void	Init (const Handle< Geom_Curve > &C, const gp_Pnt &P1, const gp_Pnt &P2, const Standard_Real p1, const Standard_Real p2)
void	Init (const Handle< Geom_Curve > &C, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2, const Standard_Real p1, const Standard_Real p2)
void	Init (const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S)
void	Init (const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S, const Standard_Real p1, const Standard_Real p2)
void	Init (const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S, const gp_Pnt &P1, const gp_Pnt &P2)
void	Init (const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2)
void	Init (const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S, const gp_Pnt &P1, const gp_Pnt &P2, const Standard_Real p1, const Standard_Real p2)
void	Init (const Handle< Geom2d_Curve > &C, const Handle< Geom_Surface > &S, const TopoDS_Vertex &V1, const TopoDS_Vertex &V2, const Standard_Real p1, const Standard_Real p2)
BRepLib_EdgeError	Error () const
	Returns the error description when NotDone. More...
const TopoDS_Edge &	Edge () const
	operator TopoDS_Edge () const
const TopoDS_Vertex &	Vertex1 () const
	Returns the first vertex of the edge. May be Null. More...
const TopoDS_Vertex &	Vertex2 () const
	Returns the second vertex of the edge. May be Null. More...
Public Member Functions inherited from BRepLib_MakeShape
void	Build ()
	This is called by Shape(). It does nothing but may be redefined. More...
const TopoDS_Shape &	Shape () const
	operator TopoDS_Shape () const
virtual BRepLib_ShapeModification	FaceStatus (const TopoDS_Face &F) const
	returns the status of the Face after the shape creation. More...
virtual Standard_Boolean	HasDescendants (const TopoDS_Face &F) const
	Returns True if the Face generates new topology. More...
virtual const TopTools_ListOfShape &	DescendantFaces (const TopoDS_Face &F)
	returns the list of generated Faces. More...
virtual Standard_Integer	NbSurfaces () const
	returns the number of surfaces after the shape creation. More...
virtual const TopTools_ListOfShape &	NewFaces (const Standard_Integer I)
	Return the faces created for surface I. More...
virtual const TopTools_ListOfShape &	FacesFromEdges (const TopoDS_Edge &E)
	returns a list of the created faces from the edge <E>. More...
Public Member Functions inherited from BRepLib_Command
virtual void	Delete ()
virtual	~BRepLib_Command ()
Standard_Boolean	IsDone () const
void	Check () const
	Raises NotDone if done is false. More...

Additional Inherited Members
Protected Member Functions inherited from BRepLib_MakeShape
	BRepLib_MakeShape ()
Protected Member Functions inherited from BRepLib_Command
	BRepLib_Command ()
	Set done to False. More...
void	Done ()
	Set done to true. More...
void	NotDone ()
	Set done to false. More...
Protected Attributes inherited from BRepLib_MakeShape
TopoDS_Shape	myShape
TopTools_ListOfShape	myGenFaces
TopTools_ListOfShape	myNewFaces
TopTools_ListOfShape	myEdgFaces

Detailed Description

Provides methods to build edges.

The methods have the following syntax, where TheCurve is one of Lin, Circ, ...

Create(C : TheCurve)

Makes an edge on the whole curve. Add vertices on finite curves.

Create(C : TheCurve; p1,p2 : Real)

Make an edge on the curve between parameters p1 and p2. if p2 < p1 the edge will be REVERSED. If p1 or p2 is infinite the curve will be open in that direction. Vertices are created for finite values of p1 and p2.

Create(C : TheCurve; P1, P2 : Pnt from gp)

Make an edge on the curve between the points P1 and P2. The points are projected on the curve and the previous method is used. An error is raised if the points are not on the curve.

Create(C : TheCurve; V1, V2 : Vertex from TopoDS)

Make an edge on the curve between the vertices V1 and V2. Same as the previous but no vertices are created. If a vertex is Null the curve will be open in this direction.

Constructor & Destructor Documentation

BRepLib_MakeEdge::BRepLib_MakeEdge

(

)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge

(

const gp_Lin &

L

)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Lin &	L,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Lin &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Lin &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge

(

const gp_Circ &

L

)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Circ &	L,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Circ &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Circ &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge

(

const gp_Elips &

L

)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Elips &	L,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Elips &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Elips &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge

(

const gp_Hypr &

L

)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Hypr &	L,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Hypr &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Hypr &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge

(

const gp_Parab &

L

)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Parab &	L,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Parab &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const gp_Parab &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge

(

const Handle< Geom_Curve > &

L

)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const Handle< Geom_Curve > &	L,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const Handle< Geom_Curve > &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const Handle< Geom_Curve > &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const Handle< Geom_Curve > &	L,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const Handle< Geom_Curve > &	L,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const Handle< Geom2d_Curve > &	L,
		const Handle< Geom_Surface > &	S
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const Handle< Geom2d_Curve > &	L,
		const Handle< Geom_Surface > &	S,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const Handle< Geom2d_Curve > &	L,
		const Handle< Geom_Surface > &	S,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const Handle< Geom2d_Curve > &	L,
		const Handle< Geom_Surface > &	S,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const Handle< Geom2d_Curve > &	L,
		const Handle< Geom_Surface > &	S,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepLib_MakeEdge::BRepLib_MakeEdge	(	const Handle< Geom2d_Curve > &	L,
		const Handle< Geom_Surface > &	S,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

Member Function Documentation

const TopoDS_Edge& BRepLib_MakeEdge::Edge

(

)

const

BRepLib_EdgeError BRepLib_MakeEdge::Error

(

)

const

Returns the error description when NotDone.

void BRepLib_MakeEdge::Init

(

const Handle< Geom_Curve > &

C

)

void BRepLib_MakeEdge::Init	(	const Handle< Geom_Curve > &	C,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

void BRepLib_MakeEdge::Init	(	const Handle< Geom_Curve > &	C,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

void BRepLib_MakeEdge::Init	(	const Handle< Geom_Curve > &	C,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

void BRepLib_MakeEdge::Init	(	const Handle< Geom_Curve > &	C,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

void BRepLib_MakeEdge::Init	(	const Handle< Geom_Curve > &	C,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

void BRepLib_MakeEdge::Init	(	const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S
	)

void BRepLib_MakeEdge::Init	(	const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

void BRepLib_MakeEdge::Init	(	const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2
	)

void BRepLib_MakeEdge::Init	(	const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2
	)

void BRepLib_MakeEdge::Init	(	const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S,
		const gp_Pnt &	P1,
		const gp_Pnt &	P2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

void BRepLib_MakeEdge::Init	(	const Handle< Geom2d_Curve > &	C,
		const Handle< Geom_Surface > &	S,
		const TopoDS_Vertex &	V1,
		const TopoDS_Vertex &	V2,
		const Standard_Real	p1,
		const Standard_Real	p2
	)

BRepLib_MakeEdge::operator TopoDS_Edge

(

)

const

const TopoDS_Vertex& BRepLib_MakeEdge::Vertex1

(

)

const

Returns the first vertex of the edge. May be Null.

const TopoDS_Vertex& BRepLib_MakeEdge::Vertex2

(

)

const

Returns the second vertex of the edge. May be Null.

---

The documentation for this class was generated from the following file:

• BRepLib_MakeEdge.hxx