Here are the data structures with brief descriptions:
[detail level 123]
  Aspect_Convert | Auxiliary functions for DCU <-> Pixels conversions |
 BRepMesh | |
| BVH | |
| opencascade | |
| OpenGl_HashMapInitializer | |
| OpenGl_Raytrace | |
| OpenGl_Utils | Helper class that implements some functionality of GLU library |
| SelectMgr_MatOp | |
 _file_ace | |
| _group_sid | |
| _MB_DESC | |
| Adaptor2d_Curve2d | Root class for 2D curves on which geometric algorithms work. An adapted curve is an interface between the services provided by a curve, and those required of the curve by algorithms, which use it. A derived concrete class is provided: Geom2dAdaptor_Curve for a curve from the Geom2d package |
| Adaptor2d_HCurve2d | Root class for 2D curves manipulated by handles, on which geometric algorithms work. An adapted curve is an interface between the services provided by a curve, and those required of the curve by algorithms, which use it. A derived specific class is provided: Geom2dAdaptor_HCurve for a curve from the Geom2d package |
| Adaptor2d_HLine2d | |
| Adaptor2d_Line2d | |
| Adaptor3d_Curve | Root class for 3D curves on which geometric algorithms work. An adapted curve is an interface between the services provided by a curve and those required of the curve by algorithms which use it. Two derived concrete classes are provided: |
| Adaptor3d_CurveOnSurface | An interface between the services provided by a curve lying on a surface from the package Geom and those required of the curve by algorithms which use it. The curve is defined as a 2D curve from the Geom2d package, in the parametric space of the surface |
| Adaptor3d_HCurve | Root class for 3D curves manipulated by handles, on which geometric algorithms work. An adapted curve is an interface between the services provided by a curve and those required of the curve by algorithms which use it. Two derived concrete classes are provided: |
| Adaptor3d_HCurveOnSurface | |
| Adaptor3d_HIsoCurve | |
| Adaptor3d_HOffsetCurve | |
| Adaptor3d_HSurface | Root class for surfaces manipulated by handles, on which geometric algorithms work. An adapted surface is an interface between the services provided by a surface and those required of the surface by algorithms which use it. A derived concrete class is provided: GeomAdaptor_HSurface for a surface from the Geom package |
| Adaptor3d_HSurfaceOfLinearExtrusion | |
| Adaptor3d_HSurfaceOfRevolution | |
| Adaptor3d_HSurfaceTool | |
| Adaptor3d_HVertex | |
| Adaptor3d_InterFunc | Used to find the points U(t) = U0 or V(t) = V0 in order to determine the Cn discontinuities of an Adpator_CurveOnSurface relativly to the discontinuities of the surface. Used to find the roots of the functions |
| Adaptor3d_IsoCurve | Defines an isoparametric curve on a surface. The type of isoparametric curve (U or V) is defined with the enumeration IsoType from GeomAbs if NoneIso is given an error is raised |
| Adaptor3d_OffsetCurve | Defines an Offset curve (algorithmic 2d curve) |
| Adaptor3d_Surface | Root class for surfaces on which geometric algorithms work. An adapted surface is an interface between the services provided by a surface and those required of the surface by algorithms which use it. A derived concrete class is provided: GeomAdaptor_Surface for a surface from the Geom package. The Surface class describes the standard behaviour of a surface for generic algorithms |
| Adaptor3d_SurfaceOfLinearExtrusion | Generalised cylinder. This surface is obtained by sweeping a curve in a given direction. The parametrization range for the parameter U is defined with referenced the curve. The parametrization range for the parameter V is ]-infinite,+infinite[ The position of the curve gives the origin for the parameter V. The continuity of the surface is CN in the V direction |
| Adaptor3d_SurfaceOfRevolution | This class defines a complete surface of revolution. The surface is obtained by rotating a curve a complete revolution about an axis. The curve and the axis must be in the same plane. If the curve and the axis are not in the same plane it is always possible to be in the previous case after a cylindrical projection of the curve in a referenced plane. For a complete surface of revolution the parametric range is 0 <= U <= 2*PI. – The parametric range for V is defined with the revolved curve. The origin of the U parametrization is given by the position of the revolved curve (reference). The direction of the revolution axis defines the positive sense of rotation (trigonometric sense) corresponding to the increasing of the parametric value U. The derivatives are always defined for the u direction. For the v direction the definition of the derivatives depends on the degree of continuity of the referenced curve. Curve and Axis are coplanar. Curve doesn't intersect Axis |
| Adaptor3d_TopolTool | This class provides a default topological tool, based on the Umin,Vmin,Umax,Vmax of an HSurface from Adaptor3d. All methods and fields may be redefined when inheriting from this class. This class is used to instantiate algorithmes as Intersection, outlines,.. |
| AdvApp2Var_ApproxAFunc2Var | Perform the approximation of <Func> F(U,V) Arguments are : Num1DSS, Num2DSS, Num3DSS :The numbers of 1,2,3 dimensional subspaces OneDTol, TwoDTol, ThreeDTol: The tolerance of approximation in each subspaces OneDTolFr, TwoDTolFr, ThreeDTolFr: The tolerance of approximation on the boundarys in each subspaces [FirstInU, LastInU]: The Bounds in U of the Approximation [FirstInV, LastInV]: The Bounds in V of the Approximation FavorIso : Give preference to extract u-iso or v-iso on F(U,V) This can be usefull to optimize the <Func> methode ContInU, ContInV : Continuity waiting in u and v PrecisCode : Precision on approximation's error mesurement 1 : Fast computation and average precision 2 : Average computation and good precision 3 : Slow computation and very good precision MaxDegInU : Maximum u-degree waiting in U MaxDegInV : Maximum u-degree waiting in V Warning: MaxDegInU (resp. MaxDegInV) must be >= 2*iu (resp. iv) + 1, where iu (resp. iv) = 0 if ContInU (resp. ContInV) = GeomAbs_C0, = 1 if = GeomAbs_C1, = 2 if = GeomAbs_C2. MaxPatch : Maximun number of Patch waiting number of Patch is number of u span * number of v span Func : The external method to evaluate F(U,V) Crit : To (re)defined condition of convergence UChoice, VChoice : To define the way in U (or V) Knot insertion Warning: for the moment, the result is a 3D Surface so Num1DSS and Num2DSS must be equals to 0 and Num3DSS must be equal to 1. Warning: the Function of type EvaluatorFunc2Var from Approx must be a subclass of AdvApp2Var_EvaluatorFunc2Var |
| AdvApp2Var_ApproxF2var | |
| AdvApp2Var_Context | all the parameters for approximation ( tolerancy, computing option, ...) |
| AdvApp2Var_Criterion | This class contains a given criterion to be satisfied |
| AdvApp2Var_Data | |
| AdvApp2Var_EvaluatorFunc2Var | |
| AdvApp2Var_Framework | |
| AdvApp2Var_Iso | Used to store constraints on a line U = Ui or V = Vj |
| AdvApp2Var_MathBase | |
| AdvApp2Var_Network | |
| AdvApp2Var_Node | Used to store constraints on a (Ui,Vj) point |
| AdvApp2Var_Patch | Used to store results on a domain [Ui,Ui+1]x[Vj,Vj+1] |
| AdvApp2Var_SequenceNodeOfSequenceOfNode | |
| AdvApp2Var_SequenceNodeOfSequenceOfPatch | |
| AdvApp2Var_SequenceNodeOfSequenceOfStrip | |
| AdvApp2Var_SequenceNodeOfStrip | |
| AdvApp2Var_SequenceOfNode | |
| AdvApp2Var_SequenceOfPatch | |
| AdvApp2Var_SequenceOfStrip | |
| AdvApp2Var_Strip | |
| AdvApp2Var_SysBase | |
| AdvApprox_ApproxAFunction | This approximate a given function |
| AdvApprox_Cutting | To choose the way of cutting in approximation |
| AdvApprox_DichoCutting | If Cutting is necessary in [a,b], we cut at (a+b) / 2 |
| AdvApprox_EvaluatorFunction | Interface for a class implementing a function to be approximated by AdvApprox_ApproxAFunction |
| AdvApprox_PrefAndRec | Inherits class Cutting; contains a list of preferential points (pi)i and a list of Recommended points used in cutting management. if Cutting is necessary in [a,b], we cut at the di nearest from (a+b)/2 |
| AdvApprox_PrefCutting | Inherits class Cutting; contains a list of preferential points (di)i if Cutting is necessary in [a,b], we cut at the di nearest from (a+b)/2 |
| AdvApprox_SimpleApprox | Approximate a function on an intervall [First,Last] The result is a simple polynomial whose degree is as low as possible to satisfy the required tolerance and the maximum degree. The maximum error and the averrage error resulting from approximating the function by the polynomial are computed |
| AIS | Application Interactive Services provide the means to create links between an application GUI viewer and the packages which are used to manage selection and presentation. The tools AIS defined in order to do this include different sorts of entities: both the selectable viewable objects themselves and the context and attribute managers to define their selection and display. To orient the user as he works in a modeling environment, views and selections must be comprehensible. There must be several different sorts of selectable and viewable object defined. These must also be interactive, that is, connecting graphic representation and the underlying reference geometry. These entities are called Interactive Objects, and are divided into four types: |
| AIS_AngleDimension | Angle dimension. Can be constructed: |
| AIS_AttributeFilter | Selects Interactive Objects, which have the desired width or color. The filter questions each Interactive Object in local context to determine whether it has an non-null owner, and if so, whether it has the required color and width attributes. If the object returns true in each case, it is kept. If not, it is rejected. This filter is used only in an open local context. In the Collector viewer, you can only locate Interactive Objects, which answer positively to the filters, which are in position when a local context is open |
| AIS_Axis | Locates the x, y and z axes in an Interactive Object. These are used to orient it correctly in presentations from different viewpoints, or to construct a revolved shape, for example, from one of the axes. Conversely, an axis can be created to build a revolved shape and then situated relative to one of the axes of the view |
| AIS_BadEdgeFilter | A Class |
| AIS_C0RegularityFilter | |
| AIS_Chamf2dDimension | A framework to define display of 2D chamfers. A chamfer is displayed with arrows and text. The text gives the length of the chamfer if it is a symmetrical chamfer, or the angle if it is not |
| AIS_Chamf3dDimension | A framework to define display of 3D chamfers. A chamfer is displayed with arrows and text. The text gives the length of the chamfer if it is a symmetrical chamfer, or the angle if it is not |
| AIS_Circle | Constructs circle datums to be used in construction of composite shapes |
| AIS_ColoredDrawer | Customizable properties |
| AIS_ColoredShape | Presentation of the shape with customizable sub-shapes properties |
| AIS_ConcentricRelation | A framework to define a constraint by a relation of concentricity between two or more interactive datums. The display of this constraint is also defined. A plane is used to create an axis along which the relation of concentricity can be extended |
| AIS_ConnectedInteractive | Creates an arbitrary located instance of another Interactive Object, which serves as a reference. This allows you to use the Connected Interactive Object without having to recalculate presentation, selection or graphic structure. These are deduced from your reference object. The relation between the connected interactive object and its source is generally one of geometric transformation. AIS_ConnectedInteractive class supports selection mode 0 for any InteractiveObject and all standard modes if its reference based on AIS_Shape. Descendants may redefine ComputeSelection() though. Also ConnectedInteractive will handle HLR if its reference based on AIS_Shape |
| AIS_DataMapIteratorOfDataMapOfILC | |
| AIS_DataMapIteratorOfDataMapofIntegerListOfinteractive | |
| AIS_DataMapIteratorOfDataMapOfIOStatus | |
| AIS_DataMapIteratorOfDataMapOfSelStat | |
| AIS_DataMapNodeOfDataMapOfILC | |
| AIS_DataMapNodeOfDataMapofIntegerListOfinteractive | |
| AIS_DataMapNodeOfDataMapOfIOStatus | |
| AIS_DataMapNodeOfDataMapOfSelStat | |
| AIS_DataMapOfILC | |
| AIS_DataMapofIntegerListOfinteractive | |
| AIS_DataMapOfIOStatus | |
| AIS_DataMapOfSelStat | |
| AIS_DiameterDimension | Diameter dimension. Can be constructued: |
| AIS_Dimension | AIS_Dimension is a base class for 2D presentations of linear (length, diameter, radius) and angular dimensions |
| AIS_DimensionOwner | The owner is the entity which makes it possible to link the sensitive primitives and the reference shapes that you want to detect. It stocks the various pieces of information which make it possible to find objects. An owner has a priority which you can modulate, so as to make one entity more selectable than another. You might want to make edges more selectable than faces, for example. In that case, you could attribute sa higher priority to the one compared to the other. An edge, could have priority 5, for example, and a face, priority 4. The default priority is 5 |
| AIS_EllipseRadiusDimension | Computes geometry ( basis curve and plane of dimension) for input shape aShape from TopoDS Root class for MinRadiusDimension and MaxRadiusDimension |
| AIS_EqualDistanceRelation | A framework to display equivalent distances between shapes and a given plane. The distance is the length of a projection from the shape to the plane. These distances are used to compare shapes by this vector alone |
| AIS_EqualRadiusRelation | |
| AIS_ExclusionFilter | A framework to reject or to accept only objects of given types and/or signatures. Objects are stored, and the stored objects - along with the flag settings - are used to define the filter. Objects to be filtered are compared with the stored objects added to the filter, and are accepted or rejected according to the exclusion flag setting |
| AIS_FixRelation | Constructs and manages a constraint by a fixed relation between two or more interactive datums. This constraint is represented by a wire from a shape - point, vertex, or edge - in the first datum and a corresponding shape in the second. Warning: This relation is not bound with any kind of parametric constraint : it represents the "status" of an parametric object |
| AIS_GlobalStatus | Stores information about objects in graphic context: |
| AIS_GraphicTool | |
| AIS_IdenticRelation | Constructs a constraint by a relation of identity between two or more datums figuring in shape Interactive Objects |
| AIS_IndexedDataMapNodeOfIndexedDataMapOfOwnerPrs | |
| AIS_IndexedDataMapOfOwnerPrs | |
| AIS_InteractiveContext | The Interactive Context allows you to manage graphic behavior and selection of Interactive Objects in one or more viewers. Class methods make this highly transparent. It is essential to remember that an Interactive Object which is already known by the Interactive Context must be modified using Context methods. You can only directly call the methods available for an Interactive Object if it has not been loaded into an Interactive Context. You must distinguish two states in the Interactive Context: |
| AIS_InteractiveObject | Defines a class of objects with display and selection services. Entities which are visualized and selected are Interactive Objects. You can make use of classes of standard Interactive Objects for which all necessary methods have already been programmed, or you can implement your own classes of Interactive Objects. Specific attributes of entities such as arrow aspect for dimensions must be loaded in a Drawer. This Drawer is then applied to the Interactive Object in view. There are four types of Interactive Object in AIS: the construction element or Datum, the Relation, which includes both dimensions and constraints, the Object, and finally, when the object is of an unknown type, the None type. Inside these categories, a signature, or index, provides the possibility of additional characterization. By default, the Interactive Object has a None type and a signature of 0. If you want to give a particular type and signature to your interactive object, you must redefine the methods, Signature and Type. Warning In the case of attribute methods, methods for standard attributes are virtual. They must be redefined by the inheriting classes. Setcolor for a point and Setcolor for a plane, for example, do not affect the same attributes in the Drawer |
| AIS_LengthDimension | Length dimension. Can be constructued: |
| AIS_Line | Constructs line datums to be used in construction of composite shapes |
| AIS_ListIteratorOfListOfInteractive | |
| AIS_ListNodeOfListOfInteractive | |
| AIS_ListOfInteractive | |
| AIS_LocalContext | Defines a specific context for selection. It becomes possible to: |
| AIS_LocalStatus | Stored Info about temporary objects |
| AIS_MapIteratorOfMapOfInteractive | |
| AIS_MapOfInteractive | |
| AIS_MaxRadiusDimension | Ellipse Max radius dimension of a Shape which can be Edge or Face (planar or cylindrical(surface of extrusion or surface of offset)) |
| AIS_MidPointRelation | Presentation of equal distance to point myMidPoint |
| AIS_MinRadiusDimension | – Ellipse Min radius dimension of a Shape which can be Edge or Face (planar or cylindrical(surface of extrusion or surface of offset)) |
| AIS_MultipleConnectedInteractive | Defines an Interactive Object by gathering together several object presentations. This is done through a list of interactive objects. These can also be Connected objects. That way memory-costly calculations of presentation are avoided |
| AIS_OffsetDimension | A framework to display dimensions of offsets. The relation between the offset and the basis shape is indicated. This relation is displayed with arrows and text. The text gives the dsitance between the offset and the basis shape |
| AIS_ParallelRelation | A framework to display constraints of parallelism between two or more Interactive Objects. These entities can be faces or edges |
| AIS_PerpendicularRelation | A framework to display constraints of perpendicularity between two or more interactive datums. These datums can be edges or faces |
| AIS_Plane | Constructs plane datums to be used in construction of composite shapes |
| AIS_PlaneTrihedron | To construct a selectable 2d axis system in a 3d drawing. This can be placed anywhere in the 3d system, and provides a coordinate system for drawing curves and shapes in a plane. There are 3 selection modes: |
| AIS_Point | Constructs point datums to be used in construction of composite shapes. The datum is displayed as the plus marker + |
| AIS_PointCloud | Interactive object for set of points. The presentation supports two display modes: |
| AIS_RadiusDimension | Radius dimension. Can be constructued: |
| AIS_Relation | One of the four types of interactive object in AIS,comprising dimensions and constraints. Serves as the abstract class for the seven relation classes as well as the seven dimension classes. The statuses available for relations between shapes are as follows: |
| AIS_Selection | |
| AIS_SequenceNodeOfSequenceOfDimension | |
| AIS_SequenceNodeOfSequenceOfInteractive | |
| AIS_SequenceOfDimension | |
| AIS_SequenceOfInteractive | |
| AIS_Shape | A framework to manage presentation and selection of shapes. AIS_Shape is the interactive object which is used the most by applications. There are standard functions available which allow you to prepare selection operations on the constituent elements of shapes - vertices, edges, faces etc - in an open local context. The selection modes specific to "Shape" type objects are referred to as Standard Activation Mode. These modes are only taken into account in open local context and only act on Interactive Objects which have redefined the virtual method AcceptShapeDecomposition so that it returns true. Several advanced functions are also available. These include functions to manage deviation angle and deviation coefficient - both HLR and non-HLR - of an inheriting shape class. These services allow you to select one type of shape interactive object for higher precision drawing. When you do this, the Prs3d_Drawer::IsOwn... functions corresponding to the above deviation angle and coefficient functions return true indicating that there is a local setting available for the specific object |
| AIS_SignatureFilter | Selects Interactive Objects through their signatures and types. The signature provides an additional characterization of an object's type, and takes the form of an index. The filter questions each Interactive Object in local context to determine whether it has an non-null owner, and if so, whether it has the desired signature. If the object returns true in each case, it is kept. If not, it is rejected. By default, the interactive object has a None type and a signature of 0. If you want to give a particular type and signature to your Interactive Object, you must redefine two virtual methods: Type and Signature. This filter is only used in an open local contexts. In the Collector viewer, you can only locate Interactive Objects which answer positively to the positioned filters when a local context is open. Warning Some signatures have already been used by standard objects delivered in AIS. These include: |
| AIS_StdMapNodeOfMapOfInteractive | |
| AIS_SymmetricRelation | A framework to display constraints of symmetricity between two or more datum Interactive Objects. A plane serves as the axis of symmetry between the shapes of which the datums are parts |
| AIS_TangentRelation | A framework to display tangency constraints between two or more Interactive Objects of the datum type. The datums are normally faces or edges |
| AIS_TextLabel | Presentation of the text |
| AIS_TexturedShape | This class allows to map textures on shapes. Presentations modes AIS_WireFrame (0) and AIS_Shaded (1) behave in the same manner as in AIS_Shape, whilst new modes 2 (bounding box) and 3 (texture mapping) extends it functionality |
| AIS_Triangulation | Interactive object that draws data from Poly_Triangulation, optionally with colors associated with each triangulation vertex. For maximum efficiency colors are represented as 32-bit integers instead of classic Quantity_Color values. Interactive selection of triangles and vertices is not yet implemented |
| AIS_Trihedron | Create a selectable trihedron there are 4 modes of selection : mode = 0 to select triedron ,priority = 1 mode = 1 to select its origine ,priority = 5 mode = 2 to select its axis ,priority = 3 mode = 3 to select its planes ,priority = 2 a trihedron has 1 origine,3 axes,3 planes. Warning For the presentation of trihedra, the default unit of length is the millimetre, and the default value for the representation of the axes is 100. If you modify these dimensions, you must temporarily recover the Drawer. From inside it, you take the aspect in which the values for length are stocked. For trihedra, this is Prs3d_Drawer_FirstAxisAspect. You change the values inside this Aspect and recalculate the presentation. If you want to use extended selection modes, different than 0, you should take care of removing of the shapes from the interactive context that has been computed for selection; it might be necessary when you change selection mode. You can use methods Axis, Point, Plane to retrieve the shapes |
| AIS_TypeFilter | Selects Interactive Objects through their types. The filter questions each Interactive Object in local context to determine whether it has an non-null owner, and if so, whether it is of the desired type. If the object returns true in each case, it is kept. If not, it is rejected. By default, the interactive object has a None type and a signature of 0. A filter for type specifies a choice of type out of a range at any level enumerated for type or kind. The choice could be for kind of interactive object, of dimension, of unit, or type of axis, plane or attribute. If you want to give a particular type and signature to your Interactive Object, you must redefine two virtual methods: Type and Signature. This filter is used in both Neutral Point and open local contexts. In the Collector viewer, you can only locate Interactive Objects which answer positively to the positioned filters when a local context is open. Warning When you close a local context, all temporary interactive objects are deleted, all selection modes concerning the context are cancelled, and all content filters are emptied |
| alist | |
| APIHeaderSection_EditHeader | |
| APIHeaderSection_MakeHeader | This class allows to consult and prepare/edit data stored in a Step Model Header |
| AppBlend_Approx | Bspline approximation of a surface |
| AppCont_Function | Class describing a continous 3d and/or function f(u). This class must be provided by the user to use the approximation algorithm FittingCurve |
| AppCont_LeastSquare | |
| AppDef_Array1OfMultiPointConstraint | |
| AppDef_BSpGradient_BFGSOfMyBSplGradientOfBSplineCompute | |
| AppDef_BSplineCompute | |
| AppDef_BSpParFunctionOfMyBSplGradientOfBSplineCompute | |
| AppDef_BSpParLeastSquareOfMyBSplGradientOfBSplineCompute | |
| AppDef_Compute | |
| AppDef_Gradient_BFGSOfMyGradientbisOfBSplineCompute | |
| AppDef_Gradient_BFGSOfMyGradientOfCompute | |
| AppDef_Gradient_BFGSOfTheGradient | |
| AppDef_HArray1OfMultiPointConstraint | |
| AppDef_LinearCriteria | Defined an Linear Criteria to used in variational Smoothing of points |
| AppDef_MultiLine | This class describes the organized set of points used in the approximations. A MultiLine is composed of n MultiPointConstraints. The approximation of the MultiLine will be done in the order of the given n MultiPointConstraints |
| AppDef_MultiPointConstraint | Describes a MultiPointConstraint used in a Multiline. MultiPointConstraints are composed of several two or three-dimensional points. The purpose is to define the corresponding points that share a common constraint in order to compute the approximation of several lines in parallel. Notes: |
| AppDef_MyBSplGradientOfBSplineCompute | |
| AppDef_MyGradientbisOfBSplineCompute | |
| AppDef_MyGradientOfCompute | |
| AppDef_MyLineTool | Example of MultiLine tool corresponding to the tools of the packages AppParCurves and Approx. For Approx, the tool will not addd points if the algorithms want some |
| AppDef_ParFunctionOfMyGradientbisOfBSplineCompute | |
| AppDef_ParFunctionOfMyGradientOfCompute | |
| AppDef_ParFunctionOfTheGradient | |
| AppDef_ParLeastSquareOfMyGradientbisOfBSplineCompute | |
| AppDef_ParLeastSquareOfMyGradientOfCompute | |
| AppDef_ParLeastSquareOfTheGradient | |
| AppDef_ResConstraintOfMyGradientbisOfBSplineCompute | |
| AppDef_ResConstraintOfMyGradientOfCompute | |
| AppDef_ResConstraintOfTheGradient | |
| AppDef_SmoothCriterion | Defined criterion to smooth points in curve |
| AppDef_TheFunction | |
| AppDef_TheGradient | |
| AppDef_TheLeastSquares | |
| AppDef_TheResol | |
| AppDef_Variational | This class is used to smooth N points with constraints by minimization of quadratic criterium but also variational criterium in order to obtain " fair Curve " Computes the approximation of a Multiline by Variational optimization |
| AppParCurves | Parallel Approximation in n curves. This package gives all the algorithms used to approximate a MultiLine described by the tool MLineTool. The result of the approximation will be a MultiCurve |
| AppParCurves_Array1OfConstraintCouple | |
| AppParCurves_Array1OfMultiBSpCurve | |
| AppParCurves_Array1OfMultiCurve | |
| AppParCurves_Array1OfMultiPoint | |
| AppParCurves_ConstraintCouple | Associates an index and a constraint for an object. This couple is used by AppDef_TheVariational when performing approximations |
| AppParCurves_HArray1OfConstraintCouple | |
| AppParCurves_HArray1OfMultiBSpCurve | |
| AppParCurves_HArray1OfMultiCurve | |
| AppParCurves_HArray1OfMultiPoint | |
| AppParCurves_MultiBSpCurve | This class describes a MultiBSpCurve approximating a Multiline. Just as a Multiline is a set of a given number of lines, a MultiBSpCurve is a set of a specified number of bsplines defined by: |
| AppParCurves_MultiCurve | This class describes a MultiCurve approximating a Multiline. As a Multiline is a set of n lines, a MultiCurve is a set of n curves. These curves are Bezier curves. A MultiCurve is composed of m MultiPoint. The approximating degree of these n curves is the same for each one |
| AppParCurves_MultiPoint | This class describes Points composing a MultiPoint. These points can be 2D or 3D. The user must first give the 3D Points and then the 2D Points. They are Poles of a Bezier Curve. This class is used either to define data input or results when performing the approximation of several lines in parallel |
| AppParCurves_SequenceNodeOfSequenceOfMultiBSpCurve | |
| AppParCurves_SequenceNodeOfSequenceOfMultiCurve | |
| AppParCurves_SequenceOfMultiBSpCurve | |
| AppParCurves_SequenceOfMultiCurve | |
| Approx_Array1OfAdHSurface | |
| Approx_Array1OfGTrsf2d | |
| Approx_Curve2d | Makes an approximation for HCurve2d from Adaptor3d |
| Approx_Curve3d | |
| Approx_CurveOnSurface | Approximation of curve on surface |
| Approx_CurvilinearParameter | Approximation of a Curve to make its parameter be its curvilinear abscissa If the curve is a curve on a surface S, C2D is the corresponding Pcurve, we considere the curve is given by its representation S(C2D(u)) If the curve is a curve on 2 surfaces S1 and S2 and C2D1 C2D2 are the two corresponding Pcurve, we considere the curve is given by its representation 1/2(S1(C2D1(u) + S2 (C2D2(u))) |
| Approx_CurvlinFunc | Defines an abstract curve with curvilinear parametrization |
| Approx_FitAndDivide | |
| Approx_FitAndDivide2d | |
| Approx_HArray1OfAdHSurface | |
| Approx_HArray1OfGTrsf2d | |
| Approx_MCurvesToBSpCurve | |
| Approx_SameParameter | Approximation of a PCurve on a surface to make its parameter be the same that the parameter of a given 3d reference curve |
| Approx_SequenceNodeOfSequenceOfHArray1OfReal | |
| Approx_SequenceOfHArray1OfReal | |
| Approx_SweepApproximation | Approximation of an Surface S(u,v) (and eventually associate 2d Curves) defined by section's law |
| Approx_SweepFunction | Defined the function used by SweepApproximation to perform sweeping application |
| ApproxInt_SvSurfaces | |
| AppStd_Application | |
| AppStdL_Application | |
| Aspect_AspectFillArea | Group of attributes for the FACE primitives. The attributes are: |
| Aspect_AspectLine | This class allows the definition of a group of attributes for the LINE primitive The attributes are: |
| Aspect_AspectMarker | This class allows the definition of a group of attributes for the primitive MARKER. the attributes are: |
| Aspect_Background | This class allows the definition of a window background |
| Aspect_CircularGrid | |
| Aspect_ColorScale | Defines a color scale for viewer |
| Aspect_DisplayConnection | This class creates and provides connection with X server. Raises exception if can not connect to X server. On Windows and Mac OS X (in case when Cocoa used) platforms this class do nothing. WARRNING: Do not close display connection manualy! |
| Aspect_GenId | This class permits the creation and control of integer identifiers |
| Aspect_GradientBackground | This class allows the definition of a window gradient background |
| Aspect_GraphicCallbackStruct | |
| Aspect_Grid | |
| Aspect_RectangularGrid | |
| Aspect_SequenceNodeOfSequenceOfColor | |
| Aspect_SequenceOfColor | |
| Aspect_Window | Defines a window |
| BinDrivers | |
| BinDrivers_DocumentRetrievalDriver | |
| BinDrivers_DocumentStorageDriver | Persistent implemention of storage a document in a binary file |
| BinLDrivers | |
| BinLDrivers_DocumentRetrievalDriver | |
| BinLDrivers_DocumentSection | More or less independent part of the saved/restored document that is distinct from OCAF data themselves but may be referred by them |
| BinLDrivers_DocumentStorageDriver | Persistent implemention of storage a document in a binary file |
| BinMDataStd | Storage and Retrieval drivers for modelling attributes |
| BinMDataStd_AsciiStringDriver | TDataStd_AsciiString attribute Driver |
| BinMDataStd_BooleanArrayDriver | |
| BinMDataStd_BooleanListDriver | |
| BinMDataStd_ByteArrayDriver | |
| BinMDataStd_CommentDriver | Attribute Driver |
| BinMDataStd_DirectoryDriver | Directory attribute Driver |
| BinMDataStd_ExpressionDriver | Attribute Driver |
| BinMDataStd_ExtStringArrayDriver | Array of extended string attribute Driver |
| BinMDataStd_ExtStringListDriver | |
| BinMDataStd_IntegerArrayDriver | Array of Integer attribute Driver |
| BinMDataStd_IntegerDriver | Integer attribute Driver |
| BinMDataStd_IntegerListDriver | |
| BinMDataStd_IntPackedMapDriver | TDataStd_IntPackedMap attribute Driver |
| BinMDataStd_NamedDataDriver | |
| BinMDataStd_NameDriver | TDataStd_Name attribute Driver |
| BinMDataStd_NoteBookDriver | NoteBook attribute Driver |
| BinMDataStd_RealArrayDriver | Array of Real attribute Driver |
| BinMDataStd_RealDriver | Real attribute Driver |
| BinMDataStd_RealListDriver | |
| BinMDataStd_ReferenceArrayDriver | |
| BinMDataStd_ReferenceListDriver | |
| BinMDataStd_RelationDriver | Attribute Driver |
| BinMDataStd_TickDriver | Tick attribute driver |
| BinMDataStd_TreeNodeDriver | Attribute Driver |
| BinMDataStd_UAttributeDriver | Attribute Driver |
| BinMDataStd_VariableDriver | Attribute Driver |
| BinMDataXtd | Storage and Retrieval drivers for modelling attributes |
| BinMDataXtd_AxisDriver | Axis attribute Driver |
| BinMDataXtd_ConstraintDriver | Attribute Driver |
| BinMDataXtd_GeometryDriver | Attribute Driver |
| BinMDataXtd_PatternStdDriver | Attribute Driver |
| BinMDataXtd_PlacementDriver | Placement attribute Driver |
| BinMDataXtd_PlaneDriver | Plane attribute Driver |
| BinMDataXtd_PointDriver | Point attribute Driver |
| BinMDataXtd_ShapeDriver | Shape attribute Driver |
| BinMDF | This package provides classes and methods to translate a transient DF into a persistent one and vice versa |
| BinMDF_ADriver | Attribute Storage/Retrieval Driver |
| BinMDF_ADriverTable | A driver table is an object building links between object types and object drivers. In the translation process, a driver table is asked to give a translation driver for each current object to be translated |
| BinMDF_DataMapIteratorOfTypeADriverMap | |
| BinMDF_DataMapNodeOfTypeADriverMap | |
| BinMDF_DoubleMapIteratorOfTypeIdMap | |
| BinMDF_DoubleMapNodeOfTypeIdMap | |
| BinMDF_ReferenceDriver | Reference attribute Driver |
| BinMDF_TagSourceDriver | TDF_TagSource Driver |
| BinMDF_TypeADriverMap | |
| BinMDF_TypeIdMap | |
| BinMDocStd | Storage and Retrieval drivers for TDocStd modelling attributes |
| BinMDocStd_XLinkDriver | XLink attribute Driver |
| BinMFunction | Storage and Retrieval drivers for TFunction modelling attributes |
| BinMFunction_FunctionDriver | Function attribute Driver |
| BinMFunction_GraphNodeDriver | GraphNode attribute Driver |
| BinMFunction_ScopeDriver | Scope attribute Driver |
| BinMNaming | Storage/Retrieval drivers for TNaming attributes |
| BinMNaming_NamedShapeDriver | NamedShape Attribute Driver |
| BinMNaming_NamingDriver | Naming Attribute Driver |
| BinMPrsStd | |
| BinMPrsStd_AISPresentationDriver | AISPresentation Attribute Driver |
| BinMPrsStd_PositionDriver | Position Attribute Driver |
| BinMXCAFDoc | |
| BinMXCAFDoc_AreaDriver | |
| BinMXCAFDoc_CentroidDriver | |
| BinMXCAFDoc_ColorDriver | |
| BinMXCAFDoc_ColorToolDriver | |
| BinMXCAFDoc_DatumDriver | |
| BinMXCAFDoc_DimTolDriver | |
| BinMXCAFDoc_DimTolToolDriver | |
| BinMXCAFDoc_DocumentToolDriver | |
| BinMXCAFDoc_GraphNodeDriver | |
| BinMXCAFDoc_LayerToolDriver | |
| BinMXCAFDoc_LocationDriver | |
| BinMXCAFDoc_MaterialDriver | |
| BinMXCAFDoc_MaterialToolDriver | |
| BinMXCAFDoc_ShapeToolDriver | |
| BinMXCAFDoc_VolumeDriver | |
| BinObjMgt_Persistent | Binary persistent representation of an object. Really it is used as a buffer for read/write an object |
| BinTObjDrivers | |
| BinTObjDrivers_DocumentRetrievalDriver | |
| BinTObjDrivers_DocumentStorageDriver | |
| BinTObjDrivers_IntSparseArrayDriver | |
| BinTObjDrivers_ModelDriver | |
| BinTObjDrivers_ObjectDriver | |
| BinTObjDrivers_ReferenceDriver | |
| BinTObjDrivers_XYZDriver | |
| BinTools | Tool to keep shapes in binary format |
| BinTools_Curve2dSet | Stores a set of Curves from Geom2d in binary format |
| BinTools_CurveSet | Stores a set of Curves from Geom in binary format |
| BinTools_LocationSet | The class LocationSet stores a set of location in a relocatable state |
| BinTools_ShapeSet | Writes topology in OStream in binary format |
| BinTools_SurfaceSet | Stores a set of Surfaces from Geom in binary format |
| BinXCAFDrivers | |
| BinXCAFDrivers_DocumentRetrievalDriver | |
| BinXCAFDrivers_DocumentStorageDriver | |
| Bisector | This package provides the bisecting line between two geometric elements |
| Bisector_Bisec | Bisec provides the bisecting line between two elements This line is trimed by a point |
| Bisector_BisecAna | This class provides the bisecting line between two geometric elements.The elements are Circles,Lines or Points |
| Bisector_BisecCC | Construct the bisector between two curves. The curves can intersect only in their extremities |
| Bisector_BisecPC | Provides the bisector between a point and a curve. the curvature on the curve has to be monoton. the point can't be on the curve exept at the extremitys |
| Bisector_Curve | |
| Bisector_FunctionH | H(v) = (T1 .P2(v) - P1) * ||T(v)|| - 2 2 (T(v).P2(v) - P1) * ||T1|| |
| Bisector_FunctionInter | 2 2 F(u) = (PC(u) - PBis1(u)) + (PC(u) - PBis2(u)) |
| Bisector_Inter | Intersection between two <Bisec> from Bisector |
| Bisector_PointOnBis | |
| Bisector_PolyBis | Polygon of PointOnBis |
| BiTgte_Blend | Root class |
| BiTgte_CurveOnEdge | Private class used to create a filler rolling on an edge |
| BiTgte_CurveOnVertex | Private class used to create a filler rolling on an edge |
| BiTgte_DataMapIteratorOfDataMapOfShapeBox | |
| BiTgte_DataMapNodeOfDataMapOfShapeBox | |
| BiTgte_DataMapOfShapeBox | |
| BiTgte_HCurveOnEdge | |
| BiTgte_HCurveOnVertex | |
| Blend_AppFunction | Deferred class for a function used to compute a blending surface between two surfaces, using a guide line. The vector <X> used in Value, Values and Derivatives methods has to be the vector of the parametric coordinates U1,V1, U2,V2, of the extremities of a section on the first and second surface |
| Blend_CSFunction | Deferred class for a function used to compute a blending surface between a surface and a curve, using a guide line. The vector <X> used in Value, Values and Derivatives methods may be the vector of the parametric coordinates U,V, W of the extremities of a section on the surface and the curve |
| Blend_CurvPointFuncInv | Deferred class for a function used to compute a blending surface between a surface and a curve, using a guide line. This function is used to find a solution on a done point of the curve. The vector <X> used in Value, Values and Derivatives methods has to be the vector of the parametric coordinates w, U, V where w is the parameter on the guide line, U,V are the parametric coordinates of a point on the partner surface |
| Blend_FuncInv | Deferred class for a function used to compute a blending surface between two surfaces, using a guide line. This function is used to find a solution on a restriction of one of the surface. The vector <X> used in Value, Values and Derivatives methods has to be the vector of the parametric coordinates t,w,U,V where t is the parameter on the curve on surface, w is the parameter on the guide line, U,V are the parametric coordinates of a point on the partner surface |
| Blend_Function | Deferred class for a function used to compute a blending surface between two surfaces, using a guide line. The vector <X> used in Value, Values and Derivatives methods has to be the vector of the parametric coordinates U1,V1, U2,V2, of the extremities of a section on the first and second surface |
| Blend_Point | |
| Blend_RstRstFunction | Deferred class for a function used to compute a blending surface between a surface and a pcurve on an other Surface, using a guide line. The vector <X> used in Value, Values and Derivatives methods may be the vector of the parametric coordinates U,V, W of the extremities of a section on the surface and the curve |
| Blend_SequenceNodeOfSequenceOfPoint | |
| Blend_SequenceOfPoint | |
| Blend_SurfCurvFuncInv | Deferred class for a function used to compute a blending surface between a surface and a curve, using a guide line. This function is used to find a solution on a done restriction of the surface |
| Blend_SurfPointFuncInv | Deferred class for a function used to compute a blending surface between a surface and a curve, using a guide line. This function is used to find a solution on a done point of the curve |
| Blend_SurfRstFunction | Deferred class for a function used to compute a blending surface between a surface and a pcurve on an other Surface, using a guide line. The vector <X> used in Value, Values and Derivatives methods may be the vector of the parametric coordinates U,V, W of the extremities of a section on the surface and the curve |
| BlendFunc | This package provides a set of generic functions, that can instantiated to compute blendings between two surfaces (Constant radius, Evolutive radius, Ruled surface) |
| BlendFunc_Chamfer | |
| BlendFunc_ChamfInv | |
| BlendFunc_ChAsym | |
| BlendFunc_ChAsymInv | |
| BlendFunc_ConstRad | |
| BlendFunc_ConstRadInv | |
| BlendFunc_Corde | This function calculates point (pts) on the curve of intersection between the normal to a curve (guide) in a chosen parameter and a surface (surf), so that pts was at a given distance from the guide. X(1),X(2) are the parameters U,V of pts on surf |
| BlendFunc_CSCircular | |
| BlendFunc_CSConstRad | |
| BlendFunc_EvolRad | |
| BlendFunc_EvolRadInv | |
| BlendFunc_Ruled | |
| BlendFunc_RuledInv | |
| BlendFunc_Tensor | Used to store the "gradient of gradient" |
| Bnd_Array1OfBox | |
| Bnd_Array1OfBox2d | |
| Bnd_Array1OfSphere | |
| Bnd_B2d | |
| Bnd_B2f | |
| Bnd_B3d | |
| Bnd_B3f | |
| Bnd_BoundSortBox | A tool to compare a bounding box or a plane with a set of bounding boxes. It sorts the set of bounding boxes to give the list of boxes which intersect the element being compared. The boxes being sorted generally bound a set of shapes, while the box being compared bounds a shape to be compared. The resulting list of intersecting boxes therefore gives the list of items which potentially intersect the shape to be compared |
| Bnd_BoundSortBox2d | A tool to compare a 2D bounding box with a set of 2D bounding boxes. It sorts the set of bounding boxes to give the list of boxes which intersect the element being compared. The boxes being sorted generally bound a set of shapes, while the box being compared bounds a shape to be compared. The resulting list of intersecting boxes therefore gives the list of items which potentially intersect the shape to be compared |
| Bnd_Box | Describes a bounding box in 3D space. A bounding box is parallel to the axes of the coordinates system. If it is finite, it is defined by the three intervals: |
| Bnd_Box2d | Describes a bounding box in 2D space. A bounding box is parallel to the axes of the coordinates system. If it is finite, it is defined by the two intervals: |
| Bnd_HArray1OfBox | |
| Bnd_HArray1OfBox2d | |
| Bnd_HArray1OfSphere | |
| Bnd_SeqOfBox | |
| Bnd_SequenceNodeOfSeqOfBox | |
| Bnd_Sphere | This class represents a bounding sphere of a geometric entity (triangle, segment of line or whatever else) |
| BndLib | The BndLib package provides functions to add a geometric primitive to a bounding box. Note: these functions work with gp objects, optionally limited by parameter values. If the curves and surfaces provided by the gp package are not explicitly parameterized, they still have an implicit parameterization, similar to that which they infer for the equivalent Geom or Geom2d objects. Add : Package to compute the bounding boxes for elementary objects from gp in 2d and 3d |
| BndLib_Add2dCurve | Computes the bounding box for a curve in 2d . Functions to add a 2D curve to a bounding box. The 2D curve is defined from a Geom2d curve |
| BndLib_Add3dCurve | Computes the bounding box for a curve in 3d. Functions to add a 3D curve to a bounding box. The 3D curve is defined from a Geom curve |
| BndLib_AddSurface | Computes the box from a surface Functions to add a surface to a bounding box. The surface is defined from a Geom surface |
| BOPAlgo_Algo | Root interface for algorithms |
| BOPAlgo_ArgumentAnalyzer | Check the validity of argument(s) for Boolean Operations |
| BOPAlgo_BOP | |
| BOPAlgo_Builder | |
| BOPAlgo_BuilderArea | The root class for algorithms to build faces/solids from set of edges/faces |
| BOPAlgo_BuilderFace | The algorithm to build faces from set of edges |
| BOPAlgo_BuilderShape | Root class for algorithms that has shape as result |
| BOPAlgo_BuilderSolid | The algorithm to build solids from set of faces |
| BOPAlgo_CheckerSI | Checks shape on self-interference |
| BOPAlgo_CheckResult | Information about faulty shapes and faulty types can't be processed by Boolean Operations |
| BOPAlgo_MakerVolume | The algorithm is to build solids from set of shapes. It uses the BOPAlgo_Builder algorithm to intersect the given shapes and build the images of faces (if needed) and BOPAlgo_BuilderSolid algorithm to build the solids |
| BOPAlgo_PaveFiller | |
| BOPAlgo_Section | The algorithm to build a Secton between the arguments. The Section consists of vertices and edges. The Section contains: |
| BOPAlgo_SectionAttribute | Class is a container of three flags used by intersection algorithm |
| BOPAlgo_ShellSplitter | The class provides the splitting of the set of connected faces on separate loops |
| BOPAlgo_Tools | |
| BOPAlgo_WireEdgeSet | |
| BOPAlgo_WireSplitter | |
| BOPCol_Box2DBndTreeSelector | |
| BOPCol_BoxBndTreeSelector | |
| BOPCol_Cnt | |
| BOPCol_ContextCnt | |
| BOPCol_ContextFunctor | |
| BOPCol_Functor | |
| BOPCol_NCVector | |
| BOPDS_CommonBlock | The class BOPDS_CommonBlock is to store the information about pave blocks that have geometry coincidence (in terms of a tolerance) with a) other pave block(s) b) face(s) |
| BOPDS_CoupleOfPaveBlocks | |
| BOPDS_Curve | The class BOPDS_Curve is to store the information about intersection curve |
| BOPDS_DS | The class BOPDS_DS provides the control the data structure for partition and boolean operation algorithms |
| BOPDS_FaceInfo | The class BOPDS_FaceInfo is to store handy information about state of face |
| BOPDS_IndexRange | The class BOPDS_IndexRange is to store the information about range of two indices |
| BOPDS_Interf | |
| BOPDS_InterfEE | |
| BOPDS_InterfEF | |
| BOPDS_InterfEZ | |
| BOPDS_InterfFF | |
| BOPDS_InterfFZ | |
| BOPDS_InterfVE | |
| BOPDS_InterfVF | |
| BOPDS_InterfVV | |
| BOPDS_InterfVZ | |
| BOPDS_InterfZZ | |
| BOPDS_Iterator | The class BOPDS_Iterator is 1.to compute intersections between BRep sub-shapes of arguments of an operation (see the class BOPDS_DS) in terms of theirs bounding boxes 2.provides interface to iterare the pairs of intersected sub-shapes of given type |
| BOPDS_IteratorSI | The class BOPDS_IteratorSI is 1.to compute self-intersections between BRep sub-shapes of each argument of an operation (see the class BOPDS_DS) in terms of theirs bounding boxes 2.provides interface to iterare the pairs of intersected sub-shapes of given type |
| BOPDS_PassKey | The class BOPDS_PassKey is to provide possibility to map objects that have a set of integer IDs as a base |
| BOPDS_PassKeyBoolean | |
| BOPDS_PassKeyMapHasher | |
| BOPDS_Pave | The class BOPDS_Pave is to store information about vertex on an edge |
| BOPDS_PaveBlock | The class BOPDS_PaveBlock is to store the information about pave block on an edge. Two adjacent paves on edge make up pave block |
| BOPDS_PaveMapHasher | |
| BOPDS_Point | The class BOPDS_Point is to store the information about intersection point |
| BOPDS_ShapeInfo | The class BOPDS_ShapeInfo is to store handy information about shape |
| BOPDS_SubIterator | The class BOPDS_SubIterator is 1.to compute intersections between two sub-sets of BRep sub-shapes of arguments of an operation (see the class BOPDS_DS) in terms of theirs bounding boxes 2.provides interface to iterare the pairs of intersected sub-shapes of given type |
| BOPDS_Tools | The class BOPDS_Tools contains a set auxiliary static functions of the package BOPDS |
| BOPTest | |
| BOPTest_DrawableShape | |
| BOPTest_Objects | |
| BOPTools | |
| BOPTools_AlgoTools | |
| BOPTools_AlgoTools2D | The class contains handy static functions dealing with the topology This is the copy of the BOPTools_AlgoTools2D.cdl |
| BOPTools_AlgoTools3D | The class contains handy static functions dealing with the topology This is the copy of BOPTools_AlgoTools3D.cdl file |
| BOPTools_ConnexityBlock | |
| BOPTools_CoupleOfShape | |
| BOPTools_EdgeSet | |
| BOPTools_Set | |
| BOPTools_SetMapHasher | |
| BOPTools_ShapeSet | Implementation of some formal opereations with a set of shapes |
| BRep_Builder | A framework providing advanced tolerance control. It is used to build Shapes. If tolerance control is required, you are advised to: |
| BRep_Curve3D | Representation of a curve by a 3D curve |
| BRep_CurveOn2Surfaces | Defines a continuity between two surfaces |
| BRep_CurveOnClosedSurface | Representation of a curve by two pcurves on a closed surface |
| BRep_CurveOnSurface | Representation of a curve by a curve in the parametric space of a surface |
| BRep_CurveRepresentation | Root class for the curve representations. Contains a location |
| BRep_GCurve | Root class for the geometric curves representation. Contains a range. Contains a first and a last parameter |
| BRep_ListIteratorOfListOfCurveRepresentation | |
| BRep_ListIteratorOfListOfPointRepresentation | |
| BRep_ListNodeOfListOfCurveRepresentation | |
| BRep_ListNodeOfListOfPointRepresentation | |
| BRep_ListOfCurveRepresentation | |
| BRep_ListOfPointRepresentation | |
| BRep_PointOnCurve | Representation by a parameter on a 3D curve |
| BRep_PointOnCurveOnSurface | Representation by a parameter on a curve on a surface |
| BRep_PointOnSurface | Representation by two parameters on a surface |
| BRep_PointRepresentation | Root class for the points representations. Contains a location and a parameter |
| BRep_PointsOnSurface | Root for points on surface |
| BRep_Polygon3D | Representation by a 3D polygon |
| BRep_PolygonOnClosedSurface | Representation by two 2d polygons in the parametric space of a surface |
| BRep_PolygonOnClosedTriangulation | A representation by two arrays of nodes on a triangulation |
| BRep_PolygonOnSurface | Representation of a 2D polygon in the parametric space of a surface |
| BRep_PolygonOnTriangulation | A representation by an array of nodes on a triangulation |
| BRep_TEdge | The TEdge from BRep is inherited from the TEdge from TopoDS. It contains the geometric data |
| BRep_TFace | The Tface from BRep is based on the TFace from TopoDS. The TFace contains : |
| BRep_Tool | Provides class methods to access to the geometry of BRep shapes |
| BRep_TVertex | The TVertex from BRep inherits from the TVertex from TopoDS. It contains the geometric data |
| BRepAdaptor_Array1OfCurve | |
| BRepAdaptor_CompCurve | The Curve from BRepAdaptor allows to use a Wire of the BRep topology like a 3D curve. Warning: With this class of curve, C0 and C1 continuities are not assumed. So be carful with some algorithm! |
| BRepAdaptor_Curve | The Curve from BRepAdaptor allows to use an Edge of the BRep topology like a 3D curve |
| BRepAdaptor_Curve2d | The Curve2d from BRepAdaptor allows to use an Edge on a Face like a 2d curve. (curve in the parametric space) |
| BRepAdaptor_HArray1OfCurve | |
| BRepAdaptor_HCompCurve | |
| BRepAdaptor_HCurve | |
| BRepAdaptor_HCurve2d | |
| BRepAdaptor_HSurface | |
| BRepAdaptor_Surface | The Surface from BRepAdaptor allows to use a Face of the BRep topology look like a 3D surface |
| BRepAlgo | The BRepAlgo package provides a full range of services to perform Old Boolean Operations in Open CASCADE. Attention: The New Boolean Operation has replaced the Old Boolean Operations algorithm in the BrepAlgoAPI package in Open CASCADE |
| BRepAlgo_AsDes | SD to store descendants and ascendants of Shapes |
| BRepAlgo_BooleanOperation | The abstract class BooleanOperation is the root class of Boolean operations. A BooleanOperation object stores the two shapes in preparation for the Boolean operation specified in one of the classes inheriting from this one. These include: |
| BRepAlgo_BooleanOperations | |
| BRepAlgo_Common | Describes functions for performing a topological common operation (Boolean intersection). A Common object provides the framework for: |
| BRepAlgo_Cut | Describes functions for performing a topological cut operation (Boolean subtraction). A Cut object provides the framework for: |
| BRepAlgo_DataMapIteratorOfDataMapOfShapeBoolean | |
| BRepAlgo_DataMapIteratorOfDataMapOfShapeInterference | |
| BRepAlgo_DataMapNodeOfDataMapOfShapeBoolean | |
| BRepAlgo_DataMapNodeOfDataMapOfShapeInterference | |
| BRepAlgo_DataMapOfShapeBoolean | |
| BRepAlgo_DataMapOfShapeInterference | |
| BRepAlgo_DSAccess | |
| BRepAlgo_EdgeConnector | Used by DSAccess to reconstruct an EdgeSet of connected edges. The result produced by MakeBlock is a list of non-standard TopoDS_wire, which can present connexions of edge of order > 2 in certain vertex. The method IsWire indicates standard/non-standard character of all wire produced |
| BRepAlgo_FaceRestrictor | Builds all the faces limited with a set of non jointing and planars wires. if <ControlOrientation> is false The Wires must have correct orientations. Sinon orientation des wires de telle sorte que les faces ne soient pas infinies et qu'elles soient disjointes |
| BRepAlgo_Fuse | Describes functions for performing a topological fusion operation (Boolean union). A Fuse object provides the framework for: |
| BRepAlgo_Image | Stores link between a shape <S> and a shape <NewS> obtained from <S>. <NewS> is an image of <S> |
| BRepAlgo_Loop | Builds the loops from a set of edges on a face |
| BRepAlgo_NormalProjection | This class makes the projection of a wire on a shape |
| BRepAlgo_Section | Construction of the section lines between two shapes. For this Boolean operation, each face of the first shape is intersected by each face of the second shape. The resulting intersection edges are brought together into a compound object, but not chained or grouped into wires. Computation of the intersection of two Shapes or Surfaces The two parts involved in this Boolean operation may be defined from geometric surfaces: the most common use is the computation of the planar section of a shape. A Section object provides the framework for: |
| BRepAlgo_SequenceNodeOfSequenceOfSequenceOfInteger | |
| BRepAlgo_SequenceOfSequenceOfInteger | |
| BRepAlgo_Tool | |
| BRepAlgoAPI_Algo | Root interface for algorithms |
| BRepAlgoAPI_BooleanOperation | The abstract class BooleanOperation is the root class of Boolean Operations (see Overview). Boolean Operations algorithm is divided onto two parts |
| BRepAlgoAPI_BuilderAlgo | The clsss contains API level of General Fuse algorithm |
| BRepAlgoAPI_Check | The class Check provides a diagnostic tool for checking single shape or couple of shapes. Single shape is checking on topological validity, small edges and self-interference. For couple of shapes added check on validity for boolean operation of given type |
| BRepAlgoAPI_Common | The class provides Boolean common operation between arguments and tools (Boolean Intersection) |
| BRepAlgoAPI_Cut | The class Cut provides Boolean cut operation between arguments and tools (Boolean Subtraction) |
| BRepAlgoAPI_Fuse | The class provides Boolean fusion operation between arguments and tools (Boolean Union) |
| BRepAlgoAPI_Section | The algorithm is to build a Secton operation between arguments and tools. The result of Section operation consists of vertices and edges. The result of Section operation contains: |
| BRepApprox_Approx | |
| BRepApprox_ApproxLine | |
| BRepApprox_BSpGradient_BFGSOfMyBSplGradientOfTheComputeLineOfApprox | |
| BRepApprox_BSpParFunctionOfMyBSplGradientOfTheComputeLineOfApprox | |
| BRepApprox_BSpParLeastSquareOfMyBSplGradientOfTheComputeLineOfApprox | |
| BRepApprox_Gradient_BFGSOfMyGradientbisOfTheComputeLineOfApprox | |
| BRepApprox_Gradient_BFGSOfMyGradientOfTheComputeLineBezierOfApprox | |
| BRepApprox_MyBSplGradientOfTheComputeLineOfApprox | |
| BRepApprox_MyGradientbisOfTheComputeLineOfApprox | |
| BRepApprox_MyGradientOfTheComputeLineBezierOfApprox | |
| BRepApprox_ParFunctionOfMyGradientbisOfTheComputeLineOfApprox | |
| BRepApprox_ParFunctionOfMyGradientOfTheComputeLineBezierOfApprox | |
| BRepApprox_ParLeastSquareOfMyGradientbisOfTheComputeLineOfApprox | |
| BRepApprox_ParLeastSquareOfMyGradientOfTheComputeLineBezierOfApprox | |
| BRepApprox_ResConstraintOfMyGradientbisOfTheComputeLineOfApprox | |
| BRepApprox_ResConstraintOfMyGradientOfTheComputeLineBezierOfApprox | |
| BRepApprox_SurfaceTool | |
| BRepApprox_TheComputeLineBezierOfApprox | |
| BRepApprox_TheComputeLineOfApprox | |
| BRepApprox_TheFunctionOfTheInt2SOfThePrmPrmSvSurfacesOfApprox | |
| BRepApprox_TheImpPrmSvSurfacesOfApprox | |
| BRepApprox_TheInt2SOfThePrmPrmSvSurfacesOfApprox | |
| BRepApprox_TheMultiLineOfApprox | |
| BRepApprox_TheMultiLineToolOfApprox | |
| BRepApprox_ThePrmPrmSvSurfacesOfApprox | |
| BRepApprox_TheZerImpFuncOfTheImpPrmSvSurfacesOfApprox | |
| BRepBlend_AppFunc | Function to approximate by AppSurface for Surface/Surface contact |
| BRepBlend_AppFuncRoot | Function to approximate by AppSurface |
| BRepBlend_AppFuncRst | Function to approximate by AppSurface for Curve/Surface contact |
| BRepBlend_AppFuncRstRst | Function to approximate by AppSurface for Edge/Face (Curve/Curve contact) |
| BRepBlend_AppSurf | |
| BRepBlend_AppSurface | Used to Approximate the blending surfaces |
| BRepBlend_BlendTool | |
| BRepBlend_CSWalking | |
| BRepBlend_CurvPointRadInv | Function of reframing between a point and a curve. valid in cases of constant and progressive radius. This function is used to find a solution on a done point of the curve 1 when using RstRstConsRad or CSConstRad... The vector <X> used in Value, Values and Derivatives methods has to be the vector of the parametric coordinates w, U where w is the parameter on the guide line, U are the parametric coordinates of a point on the partner curve 2 |
| BRepBlend_Extremity | |
| BRepBlend_HCurve2dTool | |
| BRepBlend_HCurveTool | |
| BRepBlend_Line | |
| BRepBlend_PointOnRst | Definition of an intersection point between a line and a restriction on a surface. Such a point is contains geometrical informations (see the Value method) and logical informations |
| BRepBlend_RstRstConstRad | Copy of CSConstRad with a pcurve on surface as support |
| BRepBlend_RstRstEvolRad | Function to approximate by AppSurface for Edge/Edge and evolutif radius |
| BRepBlend_RstRstLineBuilder | This class processes the data resulting from Blend_CSWalking but it takes in consideration the Surface supporting the curve to detect the breakpoint |
| BRepBlend_SequenceNodeOfSequenceOfLine | |
| BRepBlend_SequenceNodeOfSequenceOfPointOnRst | |
| BRepBlend_SequenceOfLine | |
| BRepBlend_SequenceOfPointOnRst | |
| BRepBlend_SurfCurvConstRadInv | Function of reframing between a restriction surface of the surface and a curve. Class used to compute a solution of the surfRstConstRad problem on a done restriction of the surface. The vector <X> used in Value, Values and Derivatives methods has to be the vector of the parametric coordinates wguide, wcurv, wrst where wguide is the parameter on the guide line, wcurv is the parameter on the curve, wrst is the parameter on the restriction on the surface |
| BRepBlend_SurfCurvEvolRadInv | Function of reframing between a surface restriction of the surface and a curve. Class used to compute a solution of the surfRstConstRad problem on a done restriction of the surface. The vector <X> used in Value, Values and Derivatives methods has to be the vector of the parametric coordinates wguide, wcurv, wrst where wguide is the parameter on the guide line, wcurv is the parameter on the curve, wrst is the parameter on the restriction on the surface |
| BRepBlend_SurfPointConstRadInv | Function of reframing between a point and a surface. This function is used to find a solution on a done point of the curve when using SurfRstConsRad or CSConstRad... The vector <X> used in Value, Values and Derivatives methods has to be the vector of the parametric coordinates w, U, V where w is the parameter on the guide line, U,V are the parametric coordinates of a point on the partner surface |
| BRepBlend_SurfPointEvolRadInv | Function of reframing between a point and a surface. This function is used to find a solution on a done point of the curve when using SurfRstConsRad or CSConstRad... The vector <X> used in Value, Values and Derivatives methods has to be the vector of the parametric coordinates w, U, V where w is the parameter on the guide line, U,V are the parametric coordinates of a point on the partner surface |
| BRepBlend_SurfRstConstRad | Copy of CSConstRad with pcurve on surface as support |
| BRepBlend_SurfRstEvolRad | Function to approximate by AppSurface for Edge/Face and evolutif radius |
| BRepBlend_SurfRstLineBuilder | This class processes data resulting from Blend_CSWalking taking in consideration the Surface supporting the curve to detect the breakpoint |
| BRepBlend_Walking | |
| BRepBndLib | This package provides the bounding boxes for curves and surfaces from BRepAdaptor. Functions to add a topological shape to a bounding box |
| BRepBuilderAPI | The BRepBuilderAPI package provides an Application Programming Interface for the BRep topology data structure |
| BRepBuilderAPI_BndBoxTreeSelector | Class BRepBuilderAPI_BndBoxTreeSelector derived from UBTree::Selector This class is used to select overlapping boxes, stored in NCollection::UBTree; contains methods to maintain the selection condition and to retrieve selected objects after search |
| BRepBuilderAPI_Collect | |
| BRepBuilderAPI_Command | Root class for all commands in BRepBuilderAPI |
| BRepBuilderAPI_Copy | Duplication of a shape. A Copy object provides a framework for: |
| BRepBuilderAPI_FastSewing | This class performs fast sewing of surfaces (faces). It supposes that all surfaces are finite and are naturally restricted by their bounds. Moreover, it supposes that stitched together surfaces have the same parameterization along common boundaries, therefore it does not perform time-consuming check for SameParameter property of edges |
| BRepBuilderAPI_FindPlane | Describes functions to find the plane in which the edges of a given shape are located. A FindPlane object provides a framework for: |
| BRepBuilderAPI_GTransform | Geometric transformation on a shape. The transformation to be applied is defined as a gp_GTrsf transformation. It may be: |
| BRepBuilderAPI_MakeEdge | Provides methods to build edges |
| BRepBuilderAPI_MakeEdge2d | Provides methods to build edges |
| BRepBuilderAPI_MakeFace | Provides methods to build faces |
| BRepBuilderAPI_MakePolygon | Describes functions to build polygonal wires. A polygonal wire can be built from any number of points or vertices, and consists of a sequence of connected rectilinear edges. When a point or vertex is added to the polygon if it is identic to the previous point no edge is built. The method added can be used to test it. Construction of a Polygonal Wire You can construct: |
| BRepBuilderAPI_MakeShape | This is the root class for all shape constructions. It stores the result |
| BRepBuilderAPI_MakeShell | Describes functions to build a shape corresponding to the skin of a surface. Note that the term shell in the class name has the same definition as that of a shell in STEP, in other words the skin of a shape, and not a solid model defined by surface and thickness. If you want to build the second sort of shell, you must use BRepOffsetAPI_MakeOffsetShape. A shell is made of a series of faces connected by their common edges. If the underlying surface of a face is not C2 continuous and the flag Segment is True, MakeShell breaks the surface down into several faces which are all C2 continuous and which are connected along the non-regular curves on the surface. The resulting shell contains all these faces. Construction of a Shell from a non-C2 continuous Surface A MakeShell object provides a framework for: |
| BRepBuilderAPI_MakeSolid | Describes functions to build a solid from shells. A solid is made of one shell, or a series of shells, which do not intersect each other. One of these shells constitutes the outside skin of the solid. It may be closed (a finite solid) or open (an infinite solid). Other shells form hollows (cavities) in these previous ones. Each must bound a closed volume. A MakeSolid object provides a framework for: |
| BRepBuilderAPI_MakeVertex | Describes functions to build BRepBuilder vertices directly from 3D geometric points. A vertex built using a MakeVertex object is only composed of a 3D point and a default precision value (Precision::Confusion()). Later on, 2D representations can be added, for example, when inserting a vertex in an edge. A MakeVertex object provides a framework for: |
| BRepBuilderAPI_MakeWire | Describes functions to build wires from edges. A wire can be built from any number of edges. To build a wire you first initialize the construction, then add edges in sequence. An unlimited number of edges can be added. The initialization of construction is done with: |
| BRepBuilderAPI_ModifyShape | Implements the methods of MakeShape for the constant topology modifications. The methods are implemented when the modification uses a Modifier from BRepTools. Some of them have to be redefined if the modification is implemented with another tool (see Transform from BRepBuilderAPI for example). The BRepBuilderAPI package provides the following frameworks to perform modifications of this sort: |
| BRepBuilderAPI_NurbsConvert | Conversion of the complete geometry of a shape (all 3D analytical representation of surfaces and curves) into NURBS geometry (execpt for Planes). For example, all curves supporting edges of the basis shape are converted into BSpline curves, and all surfaces supporting its faces are converted into BSpline surfaces |
| BRepBuilderAPI_Sewing | Provides methods to |
| BRepBuilderAPI_Transform | Geometric transformation on a shape. The transformation to be applied is defined as a gp_Trsf transformation, i.e. a transformation which does not modify the underlying geometry of shapes. The transformation is applied to: |
| BRepBuilderAPI_VertexInspector | Class BRepBuilderAPI_VertexInspector derived from NCollection_CellFilter_InspectorXYZ This class define the Inspector interface for CellFilter algorithm, working with gp_XYZ points in 3d space. Used in search of coincidence points with a certain tolerance |
| BRepCheck | This package provides tools to check the validity of the BRep |
| BRepCheck_Analyzer | A framework to check the overall validity of a shape. For a shape to be valid in Open CASCADE, it - or its component subshapes - must respect certain criteria. These criteria are checked by the function IsValid. Once you have determined whether a shape is valid or not, you can diagnose its specific anomalies and correct them using the services of the ShapeAnalysis, ShapeUpgrade, and ShapeFix packages |
| BRepCheck_DataMapIteratorOfDataMapOfShapeListOfStatus | |
| BRepCheck_DataMapIteratorOfDataMapOfShapeResult | |
| BRepCheck_DataMapNodeOfDataMapOfShapeListOfStatus | |
| BRepCheck_DataMapNodeOfDataMapOfShapeResult | |
| BRepCheck_DataMapOfShapeListOfStatus | |
| BRepCheck_DataMapOfShapeResult | |
| BRepCheck_Edge | |
| BRepCheck_Face | |
| BRepCheck_ListIteratorOfListOfStatus | |
| BRepCheck_ListNodeOfListOfStatus | |
| BRepCheck_ListOfStatus | |
| BRepCheck_Result | |
| BRepCheck_Shell | |
| BRepCheck_Solid | The class is to check a solid |
| BRepCheck_Vertex | |
| BRepCheck_Wire | |
| BRepClass3d | |
| BRepClass3d_DataMapIteratorOfMapOfInter | |
| BRepClass3d_DataMapNodeOfMapOfInter | |
| BRepClass3d_Intersector3d | |
| BRepClass3d_MapOfInter | |
| BRepClass3d_SClassifier | Provides an algorithm to classify a point in a solid |
| BRepClass3d_SolidClassifier | Provides an algorithm to classify a point in a solid |
| BRepClass3d_SolidExplorer | Provide an exploration of a BRep Shape for the classification |
| BRepClass3d_SolidPassiveClassifier | |
| BRepClass_Edge | This class is used to send the description of an Edge to the classifier. It contains an Edge and a Face. So the PCurve of the Edge can be found |
| BRepClass_FaceClassifier | Provides Constructors with a Face |
| BRepClass_FaceExplorer | Provide an exploration of a BRep Face for the classification. Return UV edges |
| BRepClass_FacePassiveClassifier | |
| BRepClass_FClass2dOfFClassifier | |
| BRepClass_FClassifier | |
| BRepClass_Intersector | Intersect an Edge with a segment. Implement the Intersector2d required by the classifier |
| BRepExtrema_DistanceSS | This class allows to compute minimum distance between two shapes <br> (face edge vertex) and is used in DistShapeShape class. |
| BRepExtrema_DistShapeShape | This class provides tools to compute minimum distance between two Shapes (Compound,CompSolid, Solid, Shell, Face, Wire, Edge, Vertex). |
| BRepExtrema_ExtCC | |
| BRepExtrema_ExtCF | |
| BRepExtrema_ExtFF | |
| BRepExtrema_ExtPC | |
| BRepExtrema_ExtPF | |
| BRepExtrema_Poly | |
| BRepExtrema_ShapeProximity | Tool class for shape proximity detection. For two given shapes and given tolerance (offset from the mesh) the algorithm allows to determine whether or not they are overlapped. The algorithm input consists of any shapes which can be decomposed into individual faces (used as basic shape elements). High performance is achieved through the use of existing triangulation of faces. So poly triangulation (with the desired deflection) should already be built. Note that solution is approximate (and corresponds to the deflection used for triangulation) |
| BRepExtrema_SolutionElem | This class is used to store information relative to the minimum distance between two shapes |
| BRepExtrema_TriangleSet | Triangle set corresponding to specific face |
| BRepFeat | BRepFeat is necessary for the creation and manipulation of both form and mechanical features in a Boundary Representation framework. Form features can be depressions or protrusions and include the following types: |
| BRepFeat_Builder | Provides a basic tool to implement features topological operations. The main goal of the algorithm is to perform the result of the operation according to the kept parts of the tool. Input data: a) DS; b) The kept parts of the tool; If the map of the kept parts of the tool is not filled boolean operation of the given type will be performed; c) Operation required. Steps: a) Fill myShapes, myRemoved maps; b) Rebuild edges and faces; c) Build images of the object; d) Build the result of the operation. Result: Result shape of the operation required |
| BRepFeat_Form | Provides general functions to build form features. Form features can be depressions or protrusions and include the following types: |
| BRepFeat_Gluer | One of the most significant aspects of BRepFeat functionality is the use of local operations as opposed to global ones. In a global operation, you would first construct a form of the type you wanted in your final feature, and then remove matter so that it could fit into your initial basis object. In a local operation, however, you specify the domain of the feature construction with aspects of the shape on which the feature is being created. These semantics are expressed in terms of a member shape of the basis shape from which - or up to which - matter will be added or removed. As a result, local operations make calculations simpler and faster than global operations. Glueing uses wires or edges of a face in the basis shape. These are to become a part of the feature. They are first cut out and then projected to a plane outside or inside the basis shape. By rebuilding the initial shape incorporating the edges and the faces of the tool, protrusion features can be constructed |
| BRepFeat_MakeCylindricalHole | Provides a tool to make cylindrical holes on a shape |
| BRepFeat_MakeDPrism | Describes functions to build draft prism topologies from basis shape surfaces. These can be depressions or protrusions. The semantics of draft prism feature creation is based on the construction of shapes: |
| BRepFeat_MakeLinearForm | Builds a rib or a groove along a developable, planar surface. The semantics of mechanical features is built around giving thickness to a contour. This thickness can either be symmetrical - on one side of the contour - or dissymmetrical - on both sides. As in the semantics of form features, the thickness is defined by construction of shapes in specific contexts. The development contexts differ, however, in case of mechanical features. Here they include extrusion: |
| BRepFeat_MakePipe | Constructs compound shapes with pipe features. These can be depressions or protrusions. The semantics of pipe feature creation is based on the construction of shapes: |
| BRepFeat_MakePrism | Describes functions to build prism features. These can be depressions or protrusions. The semantics of prism feature creation is based on the construction of shapes: |
| BRepFeat_MakeRevol | Describes functions to build revolved shells from basis shapes |
| BRepFeat_MakeRevolutionForm | MakeRevolutionForm Generates a surface of revolution in the feature as it slides along a revolved face in the basis shape. The semantics of mechanical features is built around giving thickness to a contour. This thickness can either be unilateral - on one side of the contour - or bilateral - on both sides. As in the semantics of form features, the thickness is defined by construction of shapes in specific contexts. The development contexts differ, however,in case of mechanical features. Here they include extrusion: |
| BRepFeat_RibSlot | Provides functions to build mechanical features. Mechanical features include ribs - protrusions and grooves (or slots) - depressions along planar (linear) surfaces or revolution surfaces. The semantics of mechanical features is built around giving thickness to a contour. This thickness can either be unilateral - on one side of the contour - or bilateral - on both sides. As in the semantics of form features, the thickness is defined by construction of shapes in specific contexts. The development contexts differ, however,in case of mechanical features. Here they include extrusion: |
| BRepFeat_SplitShape | One of the most significant aspects of BRepFeat functionality is the use of local operations as opposed to global ones. In a global operation, you would first construct a form of the type you wanted in your final feature, and then remove matter so that it could fit into your initial basis object. In a local operation, however, you specify the domain of the feature construction with aspects of the shape on which the feature is being created. These semantics are expressed in terms of a member shape of the basis shape from which - or up to which - matter will be added or removed. As a result, local operations make calculations simpler and faster than global operations. In BRepFeat, the semantics of local operations define features constructed from a contour or a part of the basis shape referred to as the tool. In a SplitShape object, wires or edges of a face in the basis shape to be used as a part of the feature are cut out and projected to a plane outside or inside the basis shape. By rebuilding the initial shape incorporating the edges and the faces of the tool, protrusion or depression features can be constructed |
| BRepFill | |
| BRepFill_ACRLaw | Build Location Law, with a Wire. In the case of guided contour and trihedron by reduced curvilinear abscissa |
| BRepFill_ApproxSeewing | Evaluate the 3dCurve and the PCurves described in a MultiLine from BRepFill. The parametrization of those curves is not imposed by the Bissectrice. The parametrization is given approximatively by the abscissa of the curve3d |
| BRepFill_CompatibleWires | Constructs a sequence of Wires (with good orientation and origin) agreed each other so that the surface passing through these sections is not twisted |
| BRepFill_ComputeCLine | |
| BRepFill_CurveConstraint | Same as CurveConstraint from GeomPlate with BRepAdaptor_Surface instead of GeomAdaptor_Surface |
| BRepFill_DataMapIteratorOfDataMapOfNodeDataMapOfShapeShape | |
| BRepFill_DataMapIteratorOfDataMapOfNodeShape | |
| BRepFill_DataMapIteratorOfDataMapOfOrientedShapeListOfShape | |
| BRepFill_DataMapIteratorOfDataMapOfShapeDataMapOfShapeListOfShape | |
| BRepFill_DataMapIteratorOfDataMapOfShapeHArray2OfShape | |
| BRepFill_DataMapIteratorOfDataMapOfShapeSequenceOfPnt | |
| BRepFill_DataMapIteratorOfDataMapOfShapeSequenceOfReal | |
| BRepFill_DataMapNodeOfDataMapOfNodeDataMapOfShapeShape | |
| BRepFill_DataMapNodeOfDataMapOfNodeShape | |
| BRepFill_DataMapNodeOfDataMapOfOrientedShapeListOfShape | |
| BRepFill_DataMapNodeOfDataMapOfShapeDataMapOfShapeListOfShape | |
| BRepFill_DataMapNodeOfDataMapOfShapeHArray2OfShape | |
| BRepFill_DataMapNodeOfDataMapOfShapeSequenceOfPnt | |
| BRepFill_DataMapNodeOfDataMapOfShapeSequenceOfReal | |
| BRepFill_DataMapOfNodeDataMapOfShapeShape | |
| BRepFill_DataMapOfNodeShape | |
| BRepFill_DataMapOfOrientedShapeListOfShape | |
| BRepFill_DataMapOfShapeDataMapOfShapeListOfShape | |
| BRepFill_DataMapOfShapeHArray2OfShape | |
| BRepFill_DataMapOfShapeSequenceOfPnt | |
| BRepFill_DataMapOfShapeSequenceOfReal | |
| BRepFill_Draft | |
| BRepFill_DraftLaw | Build Location Law, with a Wire |
| BRepFill_Edge3DLaw | Build Location Law, with a Wire |
| BRepFill_EdgeFaceAndOrder | |
| BRepFill_EdgeOnSurfLaw | Build Location Law, with a Wire and a Surface |
| BRepFill_Evolved | Constructs an evolved volume from a spine (wire or face) and a profile ( wire) |
| BRepFill_FaceAndOrder | A structure containing Face and Order of constraint |
| BRepFill_Filling | N-Side Filling This algorithm avoids to build a face from: |
| BRepFill_Generator | Compute a topological surface ( a shell) using generating wires. The face of the shell will be ruled surfaces passing by the wires. The wires must have the same number of edges |
| BRepFill_IndexedDataMapNodeOfIndexedDataMapOfOrientedShapeListOfShape | |
| BRepFill_IndexedDataMapOfOrientedShapeListOfShape | |
| BRepFill_ListIteratorOfListOfOffsetWire | |
| BRepFill_ListNodeOfListOfOffsetWire | |
| BRepFill_ListOfOffsetWire | |
| BRepFill_LocationLaw | Location Law on a Wire |
| BRepFill_MultiLine | Class used to compute the 3d curve and the two 2d curves resulting from the intersection of a surface of linear extrusion( Bissec, Dz) and the 2 faces. This 3 curves will have the same parametrization as the Bissectrice. This class is to be send to an approximation routine |
| BRepFill_NSections | Build Section Law, with N Sections |
| BRepFill_OffsetAncestors | This class is used to find the generating shapes of an OffsetWire |
| BRepFill_OffsetWire | Constructs a Offset Wire to a spine (wire or face) on the left of spine. The Wire or the Face must be planar |
| BRepFill_Pipe | Create a shape by sweeping a shape (the profile) along a wire (the spine) |
| BRepFill_PipeShell | Computes a topological shell using some wires (spines and profiles) and diplacement option Perform general sweeping construction |
| BRepFill_Section | To store section definition |
| BRepFill_SectionLaw | Build Section Law, with an Vertex, or an Wire |
| BRepFill_SectionPlacement | Place a shape in a local axis coordinate |
| BRepFill_SequenceNodeOfSequenceOfEdgeFaceAndOrder | |
| BRepFill_SequenceNodeOfSequenceOfFaceAndOrder | |
| BRepFill_SequenceNodeOfSequenceOfSection | |
| BRepFill_SequenceOfEdgeFaceAndOrder | |
| BRepFill_SequenceOfFaceAndOrder | |
| BRepFill_SequenceOfSection | |
| BRepFill_ShapeLaw | Build Section Law, with an Vertex, or an Wire |
| BRepFill_Sweep | Topological Sweep Algorithm Computes an Sweep shell using a generating wire, an SectionLaw and an LocationLaw |
| BRepFill_TrimEdgeTool | Geometric Tool using to construct Offset Wires |
| BRepFill_TrimShellCorner | |
| BRepFill_TrimSurfaceTool | Compute the Pcurves and the 3d curves resulting of the trimming of a face by an extruded surface |
| BRepFilletAPI_LocalOperation | Construction of fillets on the edges of a Shell |
| BRepFilletAPI_MakeChamfer | Describes functions to build chamfers on edges of a shell or solid. Chamfered Edge of a Shell or Solid A MakeChamfer object provides a framework for: |
| BRepFilletAPI_MakeFillet | Describes functions to build fillets on the broken edges of a shell or solid. A MakeFillet object provides a framework for: |
| BRepFilletAPI_MakeFillet2d | Describes functions to build fillets and chamfers on the vertices of a planar face. Fillets and Chamfers on the Vertices of a Planar Face A MakeFillet2d object provides a framework for: |
| BRepGProp | Provides global functions to compute a shape's global properties for lines, surfaces or volumes, and bring them together with the global properties already computed for a geometric system. The global properties computed for a system are : |
| BRepGProp_Cinert | Computes the global properties of bounded curves in 3D space. The curve must have at least a continuity C1. It can be a curve as defined in the template CurveTool from package GProp. This template gives the minimum of methods required to evaluate the global properties of a curve 3D with the algorithmes of GProp |
| BRepGProp_Domain | Arc iterator. Returns only Forward and Reversed edges from the face in an undigested order |
| BRepGProp_EdgeTool | Provides the required methods to instantiate CGProps from GProp with a Curve from BRepAdaptor |
| BRepGProp_Face | |
| BRepGProp_Gauss | Class performs computing of the global inertia properties of geometric object in 3D space by adaptive and non-adaptive 2D Gauss integration algorithms |
| BRepGProp_Sinert | Computes the global properties of a face in 3D space. The face 's requirements to evaluate the global properties are defined in the template FaceTool from package GProp |
| BRepGProp_TFunction | This class represents the integrand function for the outer integral computation. The returned value represents the integral of UFunction. It depends on the value type and the flag IsByPoint |
| BRepGProp_UFunction | This class represents the integrand function for computation of an inner integral. The returned value depends on the value type and the flag IsByPoint |
| BRepGProp_Vinert | Computes the global properties of a geometric solid (3D closed region of space) delimited with : . a surface . a point and a surface . a plane and a surface |
| BRepGProp_VinertGK | Computes the global properties of a geometric solid (3D closed region of space) delimited with : |
| BRepIntCurveSurface_Inter | Computes the intersection between a face and a curve. To intersect one curve with shape method Init(Shape, curve, tTol) should be used. To intersect a few curves with specified shape it is necessary to load shape one time using method Load(shape, tol) and find intersection points for each curve using method Init(curve). For iteration by intersection points method More() and Next() should be used |
| BRepLib | The BRepLib package provides general utilities for BRep |
| BRepLib_CheckCurveOnSurface | Computes the max distance between edge and its 2d representation on the face |
| BRepLib_Command | Root class for all commands in BRepLib |
| BRepLib_FindSurface | Provides an algorithm to find a Surface through a set of edges |
| BRepLib_FuseEdges | This class can detect vertices in a face that can be considered useless and then perform the fuse of the edges and remove the useless vertices. By useles vertices, we mean : |
| BRepLib_MakeEdge | Provides methods to build edges |
| BRepLib_MakeEdge2d | Provides methods to build edges |
| BRepLib_MakeFace | Provides methods to build faces |
| BRepLib_MakePolygon | Class to build polygonal wires |
| BRepLib_MakeShape | This is the root class for all shape constructions. It stores the result |
| BRepLib_MakeShell | Provides methos to build shells |
| BRepLib_MakeSolid | Makes a solid from compsolid or shells |
| BRepLib_MakeVertex | Provides methods to build vertices |
| BRepLib_MakeWire | Provides methods to build wires |
| BRepLProp | These global functions compute the degree of continuity of a curve built by concatenation of two edges at their junction point |
| BRepLProp_CLProps | |
| BRepLProp_CurveTool | |
| BRepLProp_SLProps | |
| BRepLProp_SurfaceTool | |
| BRepMAT2d_BisectingLocus | BisectingLocus generates and contains the Bisecting_Locus of a set of lines from Geom2d, defined by <ExploSet> |
| BRepMAT2d_DataMapIteratorOfDataMapOfBasicEltShape | |
| BRepMAT2d_DataMapIteratorOfDataMapOfShapeSequenceOfBasicElt | |
| BRepMAT2d_DataMapNodeOfDataMapOfBasicEltShape | |
| BRepMAT2d_DataMapNodeOfDataMapOfShapeSequenceOfBasicElt | |
| BRepMAT2d_DataMapOfBasicEltShape | |
| BRepMAT2d_DataMapOfShapeSequenceOfBasicElt | |
| BRepMAT2d_Explorer | Construct an explorer from wires, face, set of curves from Geom2d to compute the bisecting Locus |
| BRepMAT2d_LinkTopoBilo | Constucts links between the Wire or the Face of the explorer and the BasicElts contained in the bisecting locus |
| BRepMesh_Circle | Describes a 2d circle with a size of only 3 Standard_Real numbers instead of gp who needs 7 Standard_Real numbers |
| BRepMesh_CircleInspector | Auxilary class to find circles shot by the given point |
| BRepMesh_CircleTool | Create sort and destroy the circles used in triangulation. |
| BRepMesh_Classifier | Auxilary class contains information about correctness of discretized face and used for classification of points regarding face internals |
| BRepMesh_DataStructureOfDelaun | Describes the data structure necessary for the mesh algorithms in two dimensions plane or on surface by meshing in UV space |
| BRepMesh_Delaun | Compute the Delaunay's triangulation with the algorithm of Watson |
| BRepMesh_DiscretFactory | This class intended to setup / retrieve default triangulation algorithm. Use BRepMesh_DiscretFactory::Get() static method to retrieve global Factory instance. Use BRepMesh_DiscretFactory::Discret() method to retrieve meshing tool. |
| BRepMesh_DiscretRoot | This is a common interface for meshing algorithms instantiated by Mesh Factory and implemented by plugins |
| BRepMesh_Edge | Light weighted structure representing link of the mesh |
| BRepMesh_EdgeParameterProvider | Auxiliary class provides correct parameters on curve regarding SameParameter flag |
| BRepMesh_EdgeTessellationExtractor | Auxiliary class implements functionality retrieving tessellated representation of an edge stored in polygon |
| BRepMesh_EdgeTessellator | Auxiliary class implements functionality producing tessellated representation of an edge based on edge geometry |
| BRepMesh_FaceAttribute | Auxiliary class for FastDiscret and FastDiscretFace classes |
| BRepMesh_FastDiscret | Algorithm to mesh a shape with respect of the frontier the deflection and by option the shared components. |
| BRepMesh_FastDiscretFace | Algorithm to mesh a face with respect of the frontier the deflection and by option the shared components |
| BRepMesh_GeomTool | Tool class accumulating common geometrical functions as well as functionality using shape geometry to produce data necessary for tessellation. General aim is to calculate discretization points for the given curve or iso curve of surface according to the specified parameters |
| BRepMesh_IEdgeTool | Interface class providing API for edge tessellation tools |
| BRepMesh_IncrementalMesh | Builds the mesh of a shape with respect of their correctly triangulated parts |
| BRepMesh_OrientedEdge | Light weighted structure representing simple link |
| BRepMesh_PairOfIndex | This class represents a pair of integer indices to store element indices connected to link. It is restricted to store more than two indices in it |
| BRepMesh_PairOfPolygon | |
| BRepMesh_SelectorOfDataStructureOfDelaun | Describes a selector and an iterator on a selector of components of a mesh |
| BRepMesh_ShapeTool | |
| BRepMesh_Triangle | Light weighted structure representing triangle of mesh consisting of oriented links |
| BRepMesh_Vertex | Light weighted structure representing vertex of the mesh in parametric space. Vertex could be associated with 3d point stored in external map |
| BRepMesh_VertexInspector | Class intended for fast searching of the coincidence points |
| BRepMesh_VertexTool | Describes data structure intended to keep mesh nodes defined in UV space and implements functionality providing their uniqueness regarding thir position |
| BRepMesh_WireChecker | Auxilary class intended to check correctness of discretized face. In particular, checks boundaries of discretized face for self intersections and gaps |
| BRepMesh_WireInterferenceChecker | Auxilary class implementing functionality for checking interference between two discretized wires |
| BRepOffset | |
| BRepOffset_Analyse | Analyse of a shape consit to Find the part of edges convex concave tangent |
| BRepOffset_DataMapIteratorOfDataMapOfShapeListOfInterval | |
| BRepOffset_DataMapIteratorOfDataMapOfShapeMapOfShape | |
| BRepOffset_DataMapIteratorOfDataMapOfShapeOffset | |
| BRepOffset_DataMapNodeOfDataMapOfShapeListOfInterval | |
| BRepOffset_DataMapNodeOfDataMapOfShapeMapOfShape | |
| BRepOffset_DataMapNodeOfDataMapOfShapeOffset | |
| BRepOffset_DataMapOfShapeListOfInterval | |
| BRepOffset_DataMapOfShapeMapOfShape | |
| BRepOffset_DataMapOfShapeOffset | |
| BRepOffset_Inter2d | Computes the intersections betwwen edges on a face stores result is SD as AsDes from BRepOffset |
| BRepOffset_Inter3d | Computes the intersection face face in a set of faces Store the result in a SD as AsDes |
| BRepOffset_Interval | |
| BRepOffset_ListIteratorOfListOfInterval | |
| BRepOffset_ListNodeOfListOfInterval | |
| BRepOffset_ListOfInterval | |
| BRepOffset_MakeLoops | |
| BRepOffset_MakeOffset | |
| BRepOffset_Offset | This class compute elemenary offset surface. Evaluate the offset generated : 1 - from a face. 2 - from an edge. 3 - from a vertex |
| BRepOffset_Tool | |
| BRepOffsetAPI_DraftAngle | Taper-adding transformations on a shape. The resulting shape is constructed by defining one face to be tapered after another one, as well as the geometric properties of their tapered transformation. Each tapered transformation is propagated along the series of faces which are tangential to one another and which contains the face to be tapered. This algorithm is useful in the construction of molds or dies. It facilitates the removal of the article being produced. A DraftAngle object provides a framework for: |
| BRepOffsetAPI_FindContigousEdges | Provides methods to identify contigous boundaries for continuity control (C0, C1, ...) |
| BRepOffsetAPI_MakeDraft | Build a draft surface along a wire |
| BRepOffsetAPI_MakeEvolved | Describes functions to build evolved shapes. An evolved shape is built from a planar spine (face or wire) and a profile (wire). The evolved shape is the unlooped sweep (pipe) of the profile along the spine. Self-intersections are removed. A MakeEvolved object provides a framework for: |
| BRepOffsetAPI_MakeFilling | N-Side Filling This algorithm avoids to build a face from: |
| BRepOffsetAPI_MakeOffset | Describes algorithms for offsetting wires from a set of wires contained in a planar face. A MakeOffset object provides a framework for: |
| BRepOffsetAPI_MakeOffsetShape | Describes functions to build a shell out of a shape. The result is an unlooped shape parallel to the source shape. A MakeOffsetShape object provides a framework for: |
| BRepOffsetAPI_MakePipe | Describes functions to build pipes. A pipe is built a basis shape (called the profile) along a wire (called the spine) by sweeping. The profile must not contain solids. A MakePipe object provides a framework for: |
| BRepOffsetAPI_MakePipeShell | This class provides for a framework to construct a shell or a solid along a spine consisting in a wire. To produce a solid, the initial wire must be closed. Two approaches are used: |
| BRepOffsetAPI_MakeThickSolid | Describes functions to build hollowed solids. A hollowed solid is built from an initial solid and a set of faces on this solid, which are to be removed. The remaining faces of the solid become the walls of the hollowed solid, their thickness defined at the time of construction. the solid is built from an initial solid <S> and a set of faces {Fi} from <S>, builds a solid composed by two shells closed by the {Fi}. First shell <SS> is composed by all the faces of <S> expected {Fi}. Second shell is the offset shell of <SS>. A MakeThickSolid object provides a framework for: |
| BRepOffsetAPI_MiddlePath | Describes functions to build a middle path of a pipe-like shape |
| BRepOffsetAPI_NormalProjection | A framework to define projection onto a shape according to the normal from each point to be projected. The target shape is a face, and the source shape is an edge or a wire. The target face is considered to be a 2D surface |
| BRepOffsetAPI_SequenceNodeOfSequenceOfSequenceOfReal | |
| BRepOffsetAPI_SequenceNodeOfSequenceOfSequenceOfShape | |
| BRepOffsetAPI_SequenceOfSequenceOfReal | |
| BRepOffsetAPI_SequenceOfSequenceOfShape | |
| BRepOffsetAPI_ThruSections | Describes functions to build a loft. This is a shell or a solid passing through a set of sections in a given sequence. Usually sections are wires, but the first and the last sections may be vertices (punctual sections) |
| BRepPrim_Builder | Implements the abstract Builder with the BRep Builder |
| BRepPrim_Cone | Implement the cone primitive |
| BRepPrim_Cylinder | Cylinder primitive |
| BRepPrim_FaceBuilder | The FaceBuilder is an algorithm to build a BRep Face from a Geom Surface |
| BRepPrim_GWedge | A wedge is defined by : |
| BRepPrim_OneAxis | Algorithm to build primitives with one axis of revolution |
| BRepPrim_Revolution | Implement the OneAxis algoritm for a revolution surface |
| BRepPrim_Sphere | Implements the sphere primitive |
| BRepPrim_Torus | Implements the torus primitive |
| BRepPrim_Wedge | Provides constructors without Builders |
| BRepPrimAPI_MakeBox | Describes functions to build parallelepiped boxes. A MakeBox object provides a framework for: |
| BRepPrimAPI_MakeCone | Describes functions to build cones or portions of cones. A MakeCone object provides a framework for: |
| BRepPrimAPI_MakeCylinder | Describes functions to build cylinders or portions of cylinders. A MakeCylinder object provides a framework for: |
| BRepPrimAPI_MakeHalfSpace | Describes functions to build half-spaces. A half-space is an infinite solid, limited by a surface. It is built from a face or a shell, which bounds it, and with a reference point, which specifies the side of the surface where the matter of the half-space is located. A half-space is a tool commonly used in topological operations to cut another shape. A MakeHalfSpace object provides a framework for: |
| BRepPrimAPI_MakeOneAxis | The abstract class MakeOneAxis is the root class of algorithms used to construct rotational primitives |
| BRepPrimAPI_MakePrism | Describes functions to build linear swept topologies, called prisms. A prism is defined by: |
| BRepPrimAPI_MakeRevol | Class to make revolved sweep topologies |
| BRepPrimAPI_MakeRevolution | Describes functions to build revolved shapes. A MakeRevolution object provides a framework for: |
| BRepPrimAPI_MakeSphere | Describes functions to build spheres or portions of spheres. A MakeSphere object provides a framework for: |
| BRepPrimAPI_MakeSweep | The abstract class MakeSweep is the root class of swept primitives. Sweeps are objects you obtain by sweeping a profile along a path. The profile can be any topology and the path is usually a curve or a wire. The profile generates objects according to the following rules: |
| BRepPrimAPI_MakeTorus | Describes functions to build tori or portions of tori. A MakeTorus object provides a framework for: |
| BRepPrimAPI_MakeWedge | Describes functions to build wedges, i.e. boxes with inclined faces. A MakeWedge object provides a framework for: |
| BRepProj_Projection | The Projection class provides conical and cylindrical projections of Edge or Wire on a Shape from TopoDS. The result will be a Edge or Wire from TopoDS |
| BRepSweep_Builder | Implements the abstract Builder with the BRep Builder |
| BRepSweep_Iterator | This class provides iteration services required by the Generating Line (TopoDS Shape) of a BRepSweep. This tool is used to iterate on the direct sub-shapes of a Shape |
| BRepSweep_NumLinearRegularSweep | This a generic class is used to build Sweept primitives with a generating "shape" and a directing "line" |
| BRepSweep_Prism | Provides natural constructors to build BRepSweep translated swept Primitives |
| BRepSweep_Revol | Provides natural constructors to build BRepSweep rotated swept Primitives |
| BRepSweep_Rotation | Provides an algorithm to build object by Rotation sweep |
| BRepSweep_Tool | Provides the indexation and type analysis services required by the TopoDS generating Shape of BRepSweep |
| BRepSweep_Translation | Provides an algorithm to build object by translation sweep |
| BRepSweep_Trsf | This class is inherited from NumLinearRegularSweep to implement the simple swept primitives built moving a Shape with a Trsf. It often is possible to build the constructed subshapes by a simple move of the generating subshapes (shared topology and geometry). So two ways of construction are proposed : |
| BRepTest | Provides commands to test BRep |
| BRepToIGES_BREntity | Methods to transfer BRep entity from CASCADE to IGES |
| BRepToIGES_BRShell | This class implements the transfer of Shape Entities from Geom To IGES. These can be : . Vertex . Edge . Wire |
| BRepToIGES_BRSolid | This class implements the transfer of Shape Entities from Geom To IGES. These can be : . Vertex . Edge . Wire |
| BRepToIGES_BRWire | This class implements the transfer of Shape Entities from Geom To IGES. These can be : . Vertex . Edge . Wire |
| BRepToIGESBRep_Entity | Methods to transfer BRep entity from CASCADE to IGESBRep |
| BRepTools | The BRepTools package provides utilities for BRep data structures |
| BRepTools_DataMapIteratorOfMapOfVertexPnt2d | |
| BRepTools_DataMapNodeOfMapOfVertexPnt2d | |
| BRepTools_GTrsfModification | Defines a modification of the geometry by a GTrsf from gp. All methods return True and transform the geometry |
| BRepTools_MapOfVertexPnt2d | |
| BRepTools_Modification | Defines geometric modifications to a shape, i.e. changes to faces, edges and vertices |
| BRepTools_Modifier | Performs geometric modifications on a shape |
| BRepTools_NurbsConvertModification | Defines a modification of the geometry by a Trsf from gp. All methods return True and transform the geometry |
| BRepTools_Quilt | A Tool to glue faces at common edges and reconstruct shells |
| BRepTools_ReShape | Rebuilds a Shape by making pre-defined substitutions on some of its components |
| BRepTools_ShapeSet | Contains a Shape and all its subshapes, locations and geometries |
| BRepTools_Substitution | A tool to substitute subshapes by other shapes |
| BRepTools_TrsfModification | Describes a modification that uses a gp_Trsf to change the geometry of a shape. All functions return true and transform the geometry of the shape |
| BRepTools_WireExplorer | The WireExplorer is a tool to explore the edges of a wire in a connection order |
| BRepTopAdaptor_DataMapIteratorOfMapOfShapeTool | |
| BRepTopAdaptor_DataMapNodeOfMapOfShapeTool | |
| BRepTopAdaptor_FClass2d | |
| BRepTopAdaptor_HVertex | |
| BRepTopAdaptor_MapOfShapeTool | |
| BRepTopAdaptor_Tool | |
| BRepTopAdaptor_TopolTool | |
| BSplCLib | BSplCLib B-spline curve Library |
| BSplCLib_EvaluatorFunction | |
| BSplSLib | BSplSLib B-spline surface Library This package provides an implementation of geometric functions for rational and non rational, periodic and non periodic B-spline surface computation |
| BSplSLib_EvaluatorFunction | |
| BVH_Bin | Stores parameters of single node bin (slice of AABB) |
| BVH_BinnedBuilder | Performs building of BVH tree using binned SAH algorithm. Number of Bins controls tree's quality (greater - better) in cost of construction time |
| BVH_Box | Defines axis aligned bounding box (AABB) based on BVH vectors |
| BVH_Builder | Performs construction of BVH tree using bounding boxes (AABBs) of abstract objects |
| BVH_DistanceField | Tool object for building 3D distance field from the set of BVH triangulations. Distance field is a scalar field that measures the distance from a given point to some object, including optional information about the inside and outside of the structure. Distance fields are used as alternative surface representations (like polygons or NURBS) |
| BVH_Geometry | BVH geometry as a set of abstract geometric objects organized with bounding volume hierarchy (BVH) |
| BVH_LinearBuilder | Performs fast BVH construction using LBVH building approach. Algorithm uses spatial Morton codes to reduce the BVH construction problem to a sorting problem (radix sort – O(N) complexity). This Linear Bounding Volume Hierarchy (LBVH) builder produces BVH trees of lower quality compared to SAH-based BVH builders but it is over an order of magnitude faster (up to 3M triangles per second) |
| BVH_Object | Abstract geometric object bounded by BVH box |
| BVH_ObjectSet | Array of abstract entities (bounded by BVH boxes) to built BVH |
| BVH_ParallelDistanceFieldBuilder | |
| BVH_PrimitiveSet | Set of abstract geometric primitives organized with bounding volume hierarchy (BVH). Unlike an object set, this collection is designed for storing structural elements of a single object (such as triangles in the object triangulation). Because there may be a large number of such elements, the implementations of this interface should be sufficiently optimized |
| BVH_Properties | Abstract properties of geometric object |
| BVH_QueueBuilder | Abstract BVH builder based on the concept of work queue |
| BVH_Set | Set of abstract entities (bounded by BVH boxes). This is the minimal geometry interface needed to construct BVH |
| BVH_Sorter | Performs centroid-based sorting of abstract set |
| BVH_SpatialMedianBuilder | Performs building of BVH tree using spatial median split algorithm |
| BVH_SweepPlaneBuilder | Performs building of BVH tree using sweep plane SAH algorithm |
| BVH_Transform | Stores transform properties of geometric object |
| BVH_Tree | Stores parameters of bounding volume hierarchy (BVH). Bounding volume hierarchy (BVH) organizes geometric objects in the tree based on spatial relationships. Each node in the tree contains an axis-aligned bounding box of all the objects below it. Bounding volume hierarchies are used in many algorithms to support efficient operations on the sets of geometric objects, such as collision detection, ray-tracing, searching of nearest objects, and view frustum culling |
| BVH_Triangulation | Triangulation as an example of BVH primitive set |
| CALL_DEF_COLOR | |
| CALL_DEF_LAYER | |
| CALL_DEF_MATERIAL | |
| CALL_DEF_POINT | |
| CALL_DEF_PTRLAYER | |
| CALL_DEF_TRANSFORM_PERSISTENCE | |
| CALL_DEF_USERDRAW | |
| CALL_DEF_VERTEX | |
| CALL_DEF_VIEWCONTEXT | |
| CALL_DEF_VIEWMAPPING | |
| CALL_DEF_VIEWORIENTATION | |
| CALL_DEF_WINDOW | |
| CDF | |
| CDF_Application | |
| CDF_Directory | A directory is a collection of documents. There is only one instance of a given document in a directory. put |
| CDF_DirectoryIterator | |
| CDF_FWOSDriver | |
| CDF_MetaDataDriver | This class list the method that must be available for a specific DBMS |
| CDF_MetaDataDriverFactory | |
| CDF_Session | |
| CDF_Store | |
| CDF_StoreList | |
| CDF_Timer | |
| CDM_Application | |
| CDM_COutMessageDriver | AMessageDriver for output to COUT (only ASCII strings) |
| CDM_DataMapIteratorOfMetaDataLookUpTable | |
| CDM_DataMapIteratorOfPresentationDirectory | |
| CDM_DataMapNodeOfMetaDataLookUpTable | |
| CDM_DataMapNodeOfPresentationDirectory | |
| CDM_Document | An applicative document is an instance of a class inheriting CDM_Document. These documents have the following properties: |
| CDM_DocumentHasher | |
| CDM_ListIteratorOfListOfDocument | |
| CDM_ListIteratorOfListOfReferences | |
| CDM_ListNodeOfListOfDocument | |
| CDM_ListNodeOfListOfReferences | |
| CDM_ListOfDocument | |
| CDM_ListOfReferences | |
| CDM_MapIteratorOfMapOfDocument | |
| CDM_MapOfDocument | |
| CDM_MessageDriver | |
| CDM_MetaData | |
| CDM_MetaDataLookUpTable | |
| CDM_NullMessageDriver | MessageDriver that writes nowhere |
| CDM_PresentationDirectory | |
| CDM_Reference | |
| CDM_ReferenceIterator | |
| CDM_StdMapNodeOfMapOfDocument | |
| ChFi2d | This package contains the algorithms used to build fillets or chamfers on planar wire |
| ChFi2d_AnaFilletAlgo | An analytical algorithm for calculation of the fillets. It is implemented for segments and arcs of circle only |
| ChFi2d_Builder | This class contains the algorithm used to build fillet on planar wire |
| ChFi2d_ChamferAPI | A class making a chamfer between two linear edges |
| ChFi2d_FilletAlgo | Algorithm that creates fillet edge: arc tangent to two edges in the start and in the end vertices. Initial edges must be located on the plane and must be connected by the end or start points (shared vertices are not obligatory). Created fillet arc is created with the given radius, that is useful in sketcher applications |
| ChFi2d_FilletAPI | An interface class for 2D fillets. Open CASCADE provides two algorithms for 2D fillets: ChFi2d_Builder - it constructs a fillet or chamfer for linear and circular edges of a face. ChFi2d_FilletAPI - it encapsulates two algorithms: ChFi2d_AnaFilletAlgo - analytical constructor of the fillet. It works only for linear and circular edges, having a common point. ChFi2d_FilletAlgo - iteration recursive method constructing the fillet edge for any type of edges including ellipses and b-splines. The edges may even have no common point |
| ChFi3d | Creation of spatial fillets on a solid |
| ChFi3d_Builder | Root class for calculation of surfaces (fillets, chamfers) destined to smooth edges of a gap on a Shape and the reconstruction of the Shape |
| ChFi3d_ChBuilder | Construction tool for 3D chamfers on edges (on a solid) |
| ChFi3d_FilBuilder | Tool of construction of fillets 3d on edges (on a solid) |
| ChFi3d_SearchSing | Searches singularities on fillet. F(t) = (C1(t) - C2(t)).(C1'(t) - C2'(t)); |
| ChFiDS_ChamfSpine | Provides data specific to chamfers distances on each of faces |
| ChFiDS_CircSection | A Section of fillet |
| ChFiDS_CommonPoint | Point start/end of fillet common to 2 adjacent filets and to an edge on one of 2 faces participating in the construction of the fillet |
| ChFiDS_ElSpine | Elementary Spine for cheminements and approximations |
| ChFiDS_FaceInterference | Interference face/fillet |
| ChFiDS_FilSpine | Provides data specific to the fillets - vector or rule of evolution (C2) |
| ChFiDS_HData | |
| ChFiDS_HElSpine | |
| ChFiDS_IndexedDataMapNodeOfIndexedDataMapOfVertexListOfStripe | |
| ChFiDS_IndexedDataMapOfVertexListOfStripe | |
| ChFiDS_ListIteratorOfListOfHElSpine | |
| ChFiDS_ListIteratorOfListOfStripe | |
| ChFiDS_ListIteratorOfRegularities | |
| ChFiDS_ListNodeOfListOfHElSpine | |
| ChFiDS_ListNodeOfListOfStripe | |
| ChFiDS_ListNodeOfRegularities | |
| ChFiDS_ListOfHElSpine | |
| ChFiDS_ListOfStripe | |
| ChFiDS_Map | Encapsulation of IndexedDataMapOfShapeListOfShape |
| ChFiDS_Regul | Storage of a curve and its 2 faces or surfaces of support |
| ChFiDS_Regularities | |
| ChFiDS_SecArray1 | |
| ChFiDS_SecHArray1 | |
| ChFiDS_SequenceNodeOfSequenceOfSpine | |
| ChFiDS_SequenceNodeOfSequenceOfSurfData | |
| ChFiDS_SequenceOfSpine | |
| ChFiDS_SequenceOfSurfData | |
| ChFiDS_Spine | Contains information necessary for construction of a 3D fillet or chamfer: |
| ChFiDS_Stripe | Data characterising a band of fillet |
| ChFiDS_StripeArray1 | |
| ChFiDS_StripeMap | Encapsulation of IndexedDataMapOfVertexListOfStripe |
| ChFiDS_SurfData | Data structure for all information related to the fillet and to 2 faces vis a vis |
| ChFiKPart_ComputeData | Methodes de classe permettant de remplir une SurfData dans les cas particuliers de conges suivants: |
| ChFiKPart_DataMapIteratorOfRstMap | |
| ChFiKPart_DataMapNodeOfRstMap | |
| ChFiKPart_RstMap | |
| cilist | |
| cllist | |
| Cocoa_LocalPool | Auxiliary class to create local pool |
| Cocoa_Window | This class defines Cocoa window |
| complex | |
| Contap_ArcFunction | |
| Contap_ContAna | This class provides the computation of the contours for quadric surfaces |
| Contap_Contour | |
| Contap_HContTool | Tool for the intersection between 2 surfaces. Regroupe pour l instant les methodes hors Adaptor3d.. |
| Contap_HCurve2dTool | |
| Contap_Line | |
| Contap_Point | Definition of a vertex on the contour line. Most of the time, such a point is an intersection between the contour and a restriction of the surface. When it is not tyhe method IsOnArc return False. Such a point is contains geometrical informations (see the Value method) and logical informations |
| Contap_SequenceNodeOfSequenceOfIWLineOfTheIWalking | |
| Contap_SequenceNodeOfSequenceOfPathPointOfTheSearch | |
| Contap_SequenceNodeOfSequenceOfSegmentOfTheSearch | |
| Contap_SequenceNodeOfTheSequenceOfLine | |
| Contap_SequenceNodeOfTheSequenceOfPoint | |
| Contap_SequenceOfIWLineOfTheIWalking | |
| Contap_SequenceOfPathPointOfTheSearch | |
| Contap_SequenceOfSegmentOfTheSearch | |
| Contap_SurfFunction | This class describes the function on a parametric surface. the form of the function is F(u,v) = 0 where u and v are the parameteric coordinates of a point on the surface, to compute the contours of the surface |
| Contap_SurfProps | Internal tool used to compute the normal and its derivatives |
| Contap_TheHSequenceOfPoint | |
| Contap_TheIWalking | |
| Contap_TheIWLineOfTheIWalking | |
| Contap_ThePathPointOfTheSearch | |
| Contap_TheSearch | |
| Contap_TheSearchInside | |
| Contap_TheSegmentOfTheSearch | |
| Contap_TheSequenceOfLine | |
| Contap_TheSequenceOfPoint | |
| Convert_CircleToBSplineCurve | This algorithm converts a circle into a rational B-spline curve. The circle is a Circ2d from package gp and its parametrization is : P (U) = Loc + R * (Cos(U) * Xdir + Sin(U) * YDir) where Loc is the center of the circle Xdir and Ydir are the normalized directions of the local cartesian coordinate system of the circle. The parametrization range for the circle is U [0, 2Pi] |
| Convert_CompBezierCurves2dToBSplineCurve2d | Converts a list of connecting Bezier Curves 2d to a BSplineCurve 2d. if possible, the continuity of the BSpline will be increased to more than C0 |
| Convert_CompBezierCurvesToBSplineCurve | An algorithm to convert a sequence of adjacent non-rational Bezier curves into a BSpline curve. A CompBezierCurvesToBSplineCurve object provides a framework for: |
| Convert_CompPolynomialToPoles | Convert a serie of Polynomial N-Dimensional Curves that are have continuity CM to an N-Dimensional Bspline Curve that has continuity CM. (to convert an function (curve) polynomial by span in a BSpline) This class uses the following arguments : NumCurves : the number of Polynomial Curves Continuity: the requested continuity for the n-dimensional Spline Dimension : the dimension of the Spline MaxDegree : maximum allowed degree for each composite polynomial segment. NumCoeffPerCurve : the number of coefficient per segments = degree - 1 Coefficients : the coefficients organized in the following way [1..<myNumPolynomials>][1..myMaxDegree +1][1..myDimension] that is : index [n,d,i] is at slot (n-1) * (myMaxDegree + 1) * myDimension + (d-1) * myDimension + i PolynomialIntervals : nth polynomial represents a polynomial between myPolynomialIntervals->Value(n,0) and myPolynomialIntervals->Value(n,1) TrueIntervals : the nth polynomial has to be mapped linearly to be defined on the following interval : myTrueIntervals->Value(n) and myTrueIntervals->Value(n+1) so that it represent adequatly the function with the required continuity |
| Convert_ConeToBSplineSurface | This algorithm converts a bounded Cone into a rational B-spline surface. The cone a Cone from package gp. Its parametrization is : P (U, V) = Loc + V * Zdir + (R + V*Tan(Ang)) * (Cos(U)*Xdir + Sin(U)*Ydir) where Loc is the location point of the cone, Xdir, Ydir and Zdir are the normalized directions of the local cartesian coordinate system of the cone (Zdir is the direction of the Cone's axis) , Ang is the cone semi-angle. The U parametrization range is [0, 2PI]. KeyWords : Convert, Cone, BSplineSurface |
| Convert_ConicToBSplineCurve | Root class for algorithms which convert a conic curve into a BSpline curve (CircleToBSplineCurve, EllipseToBSplineCurve, HyperbolaToBSplineCurve, ParabolaToBSplineCurve). These algorithms all work on 2D curves from the gp package and compute all the data needed to construct a BSpline curve equivalent to the conic curve. This data consists of: |
| Convert_CylinderToBSplineSurface | This algorithm converts a bounded cylinder into a rational B-spline surface. The cylinder is a Cylinder from package gp. The parametrization of the cylinder is : P (U, V) = Loc + V * Zdir + Radius * (Xdir*Cos(U) + Ydir*Sin(U)) where Loc is the location point of the cylinder, Xdir, Ydir and Zdir are the normalized directions of the local cartesian coordinate system of the cylinder (Zdir is the direction of the cylinder's axis). The U parametrization range is U [0, 2PI]. KeyWords : Convert, Cylinder, BSplineSurface |
| Convert_ElementarySurfaceToBSplineSurface | Root class for algorithms which convert an elementary surface (cylinder, cone, sphere or torus) into a BSpline surface (CylinderToBSplineSurface, ConeToBSplineSurface, SphereToBSplineSurface, TorusToBSplineSurface). These algorithms all work on elementary surfaces from the gp package and compute all the data needed to construct a BSpline surface equivalent to the cylinder, cone, sphere or torus. This data consists of the following: |
| Convert_EllipseToBSplineCurve | This algorithm converts a ellipse into a rational B-spline curve. The ellipse is represented an Elips2d from package gp with the parametrization : P (U) = Loc + (MajorRadius * Cos(U) * Xdir + MinorRadius * Sin(U) * Ydir) where Loc is the center of the ellipse, Xdir and Ydir are the normalized directions of the local cartesian coordinate system of the ellipse. The parametrization range is U [0, 2PI]. KeyWords : Convert, Ellipse, BSplineCurve, 2D |
| Convert_GridPolynomialToPoles | Convert a grid of Polynomial Surfaces that are have continuity CM to an Bspline Surface that has continuity CM |
| Convert_HyperbolaToBSplineCurve | This algorithm converts a hyperbola into a rational B-spline curve. The hyperbola is an Hypr2d from package gp with the parametrization : P (U) = Loc + (MajorRadius * Cosh(U) * Xdir + MinorRadius * Sinh(U) * Ydir) where Loc is the location point of the hyperbola, Xdir and Ydir are the normalized directions of the local cartesian coordinate system of the hyperbola. KeyWords : Convert, Hyperbola, BSplineCurve, 2D |
| Convert_ParabolaToBSplineCurve | This algorithm converts a parabola into a non rational B-spline curve. The parabola is a Parab2d from package gp with the parametrization P (U) = Loc + F * (U*U * Xdir + 2 * U * Ydir) where Loc is the apex of the parabola, Xdir is the normalized direction of the symmetry axis of the parabola, Ydir is the normalized direction of the directrix and F is the focal length. KeyWords : Convert, Parabola, BSplineCurve, 2D |
| Convert_SequenceNodeOfSequenceOfArray1OfPoles | |
| Convert_SequenceOfArray1OfPoles | |
| Convert_SphereToBSplineSurface | This algorithm converts a bounded Sphere into a rational B-spline surface. The sphere is a Sphere from package gp. The parametrization of the sphere is P (U, V) = Loc + Radius * Sin(V) * Zdir + Radius * Cos(V) * (Cos(U)*Xdir + Sin(U)*Ydir) where Loc is the center of the sphere Xdir, Ydir and Zdir are the normalized directions of the local cartesian coordinate system of the sphere. The parametrization range is U [0, 2PI] and V [-PI/2, PI/2]. KeyWords : Convert, Sphere, BSplineSurface |
| Convert_TorusToBSplineSurface | This algorithm converts a bounded Torus into a rational B-spline surface. The torus is a Torus from package gp. The parametrization of the torus is : P (U, V) = Loc + MinorRadius * Sin(V) * Zdir + (MajorRadius+MinorRadius*Cos(V)) * (Cos(U)*Xdir + Sin(U)*Ydir) where Loc is the center of the torus, Xdir, Ydir and Zdir are the normalized directions of the local cartesian coordinate system of the Torus. The parametrization range is U [0, 2PI], V [0, 2PI]. KeyWords : Convert, Torus, BSplineSurface |
| CPnts_AbscissaPoint | Algorithm computes a point on a curve at a given distance from another point on the curve |
| CPnts_MyGaussFunction | For implementation, compute values for Gauss |
| CPnts_MyRootFunction | Implements a function for the Newton algorithm to find the solution of Integral(F) = L (compute Length and Derivative of the curve for Newton) |
| CPnts_UniformDeflection | This class defines an algorithm to create a set of points (with a given chordal deviation) at the positions of constant deflection of a given parametrized curve or a trimmed circle. The continuity of the curve must be at least C2 |
| CSLib | This package implements functions for basis geometric computation on curves and surfaces. The tolerance criterions used in this package are Resolution from package gp and RealEpsilon from class Real of package Standard |
| CSLib_Class2d | *** Class2d : Low level algorithm for 2d classification this class was moved from package BRepTopAdaptor |
| CSLib_NormalPolyDef | |
| DBC_BaseArray | |
| DBC_VArrayNodeOfVArrayOfCharacter | |
| DBC_VArrayNodeOfVArrayOfExtCharacter | |
| DBC_VArrayNodeOfVArrayOfInteger | |
| DBC_VArrayNodeOfVArrayOfReal | |
| DBC_VArrayOfCharacter | |
| DBC_VArrayOfExtCharacter | |
| DBC_VArrayOfInteger | |
| DBC_VArrayOfReal | |
| DBC_VArrayTNodeOfVArrayOfCharacter | |
| DBC_VArrayTNodeOfVArrayOfExtCharacter | |
| DBC_VArrayTNodeOfVArrayOfInteger | |
| DBC_VArrayTNodeOfVArrayOfReal | |
| DBRep | Used to display BRep objects using the DrawTrSurf package. The DrawableShape is a Display object build from a Shape. Provides methods to manage a directory of named shapes. Provides a set of Draw commands for Shapes |
| DBRep_DrawableShape | Drawable structure to display a shape. Contains a list of edges and a list of faces |
| DBRep_Edge | Display of an edge. Edge + color |
| DBRep_Face | Display of a face. Face + Array of iso + color |
| DBRep_HideData | This class stores all the informations concerning hidden lines on a view |
| DBRep_IsoBuilder | Creation of isoparametric curves |
| DBRep_ListIteratorOfListOfEdge | |
| DBRep_ListIteratorOfListOfFace | |
| DBRep_ListIteratorOfListOfHideData | |
| DBRep_ListNodeOfListOfEdge | |
| DBRep_ListNodeOfListOfFace | |
| DBRep_ListNodeOfListOfHideData | |
| DBRep_ListOfEdge | |
| DBRep_ListOfFace | |
| DBRep_ListOfHideData | |
| DDataStd | <>commands for Standard Attributes. |
| DDataStd_DrawDriver | Root class of drivers to build draw variables from TDF_Label. Priority rule to display standard attributes is : |
| DDataStd_DrawPresentation | Draw presentaion of a label of a document |
| DDataStd_TreeBrowser | <>Browses a TreeNode from TDataStd. |
| DDF | Provides facilities to manipulate data framework in a Draw-Commands environment |
| DDF_AttributeBrowser | |
| DDF_Browser | Browses a data framework from TDF |
| DDF_Data | Encapsulates a data framework from TDF in a drawable object |
| DDF_IOStream | |
| DDF_ListIteratorOfTransactionStack | |
| DDF_ListNodeOfTransactionStack | |
| DDF_Transaction | This class encapsulates TDF_Transaction |
| DDF_TransactionStack | |
| DDocStd | This package provides Draw services to test CAF standard documents (see TDocStd package) |
| DDocStd_DrawDocument | <>draw variable for TDocStd_Document. |
| Dico_DictionaryOfInteger | |
| Dico_DictionaryOfTransient | |
| Dico_IteratorOfDictionaryOfInteger | |
| Dico_IteratorOfDictionaryOfTransient | |
| Dico_StackItemOfDictionaryOfInteger | |
| Dico_StackItemOfDictionaryOfTransient | |
| DNaming | |
| DNaming_BooleanOperationDriver | Driver for Fuse, Cut, Common |
| DNaming_BoxDriver | |
| DNaming_CylinderDriver | Computes Cylinder function |
| DNaming_DataMapIteratorOfDataMapOfShapeOfName | |
| DNaming_DataMapNodeOfDataMapOfShapeOfName | |
| DNaming_DataMapOfShapeOfName | |
| DNaming_FilletDriver | |
| DNaming_Line3DDriver | Computes Line 3D function |
| DNaming_PointDriver | Driver for PointXYZ and RelativePoint |
| DNaming_PrismDriver | |
| DNaming_RevolutionDriver | |
| DNaming_SelectionDriver | |
| DNaming_SphereDriver | |
| DNaming_TransformationDriver | |
| doublecomplex | |
| DPrsStd | <>commands for presentation based on AIS |
| Draft | |
| Draft_DataMapIteratorOfDataMapOfEdgeEdgeInfo | |
| Draft_DataMapIteratorOfDataMapOfFaceFaceInfo | |
| Draft_DataMapIteratorOfDataMapOfVertexVertexInfo | |
| Draft_DataMapNodeOfDataMapOfEdgeEdgeInfo | |
| Draft_DataMapNodeOfDataMapOfFaceFaceInfo | |
| Draft_DataMapNodeOfDataMapOfVertexVertexInfo | |
| Draft_DataMapOfEdgeEdgeInfo | |
| Draft_DataMapOfFaceFaceInfo | |
| Draft_DataMapOfVertexVertexInfo | |
| Draft_EdgeInfo | |
| Draft_FaceInfo | |
| Draft_Modification | |
| Draft_VertexInfo | |
| Draw | MAQUETTE DESSIN MODELISATION |
| Draw_Axis2D | |
| Draw_Axis3D | |
| Draw_Box | 3d box |
| Draw_Chronometer | Class to store chronometer variables |
| Draw_Circle2D | |
| Draw_Circle3D | |
| Draw_Color | |
| Draw_Display | Use to draw in a 3d or a 2d view |
| Draw_Drawable2D | |
| Draw_Drawable3D | |
| Draw_Grid | |
| Draw_IndexedMapNodeOfMapOfAsciiString | |
| Draw_Interpretor | Provides an encapsulation of the TCL interpretor to define Draw commands |
| Draw_MapOfAsciiString | |
| Draw_Marker2D | |
| Draw_Marker3D | |
| Draw_Number | To store nummbers in variables |
| Draw_Printer | Implementation of Printer class with output (Message_Messenge) directed to Draw_Interpretor |
| Draw_ProgressIndicator | Implements ProgressIndicator (interface provided by Message) for DRAW, with possibility to output to TCL window and/or trace file |
| Draw_SaveAndRestore | |
| Draw_Segment2D | |
| Draw_Segment3D | |
| Draw_SequenceNodeOfSequenceOfDrawable3D | |
| Draw_SequenceOfDrawable3D | |
| Draw_Text2D | |
| Draw_Text3D | |
| Draw_View | |
| Draw_Viewer | |
| Draw_Window | |
| DrawDim | This package provides Drawable Dimensions |
| DrawDim_Angle | |
| DrawDim_Dimension | Dimension between planes and cylinder |
| DrawDim_Distance | |
| DrawDim_PlanarAngle | |
| DrawDim_PlanarDiameter | |
| DrawDim_PlanarDimension | Dimensions between point, line and circle ON a plane |
| DrawDim_PlanarDistance | PlanarDistance point/point PlanarDistance point/line PlanarDistance line/line |
| DrawDim_PlanarRadius | |
| DrawDim_Radius | |
| DrawFairCurve_Batten | Interactive Draw object of type "Batten" |
| DrawFairCurve_MinimalVariation | Interactive Draw object of type "MVC" |
| DrawTrSurf | This package supports the display of parametric curves and surfaces |
| DrawTrSurf_BezierCurve | |
| DrawTrSurf_BezierCurve2d | |
| DrawTrSurf_BezierSurface | |
| DrawTrSurf_BSplineCurve | |
| DrawTrSurf_BSplineCurve2d | |
| DrawTrSurf_BSplineSurface | This class defines a drawable BSplineSurface. With this class you can draw the control points and the knots of the surface. You can use the general class Surface from DrawTrSurf too, if you just want to sea boundaries and isoparametric curves |
| DrawTrSurf_Curve | This class defines a drawable curve in 3d space |
| DrawTrSurf_Curve2d | This class defines a drawable curve in 2d space. The curve is drawned in the plane XOY |
| DrawTrSurf_Drawable | This class adds to the Drawable3D methods to display Curves and Curves on Surface |
| DrawTrSurf_Point | A drawable point |
| DrawTrSurf_Polygon2D | Used to display a 2d polygon |
| DrawTrSurf_Polygon3D | Used to display a 3d polygon |
| DrawTrSurf_Surface | This class defines a drawable surface. With this class you can draw a general surface from package Geom |
| DrawTrSurf_Triangulation | Used to display a triangulation |
| DrawTrSurf_Triangulation2D | Used to display a 2d triangulation |
| DsgPrs | Describes Standard Presentations for DsgIHM objects |
| DsgPrs_AnglePresentation | A framework for displaying angles |
| DsgPrs_Chamf2dPresentation | Framework for display of 2D chamfers |
| DsgPrs_ConcentricPresentation | A framework to define display of relations of concentricity |
| DsgPrs_DatumPrs | |
| DsgPrs_DiameterPresentation | A framework for displaying diameters in shapes |
| DsgPrs_EllipseRadiusPresentation | |
| DsgPrs_EqualDistancePresentation | A framework to display equal distances between shapes and a given plane. The distance is the length of a projection from the shape to the plane. These distances are used to compare two shapes by this vector alone |
| DsgPrs_EqualRadiusPresentation | A framework to define display of equality in radii |
| DsgPrs_FilletRadiusPresentation | A framework for displaying radii of fillets |
| DsgPrs_FixPresentation | Class which draws the presentation of Fixed objects |
| DsgPrs_IdenticPresentation | |
| DsgPrs_LengthPresentation | Framework for displaying lengths. The length displayed is indicated by line segments and text alone or by a combination of line segment, text and arrows at either or both of its ends |
| DsgPrs_MidPointPresentation | |
| DsgPrs_OffsetPresentation | A framework to define display of offsets |
| DsgPrs_ParalPresentation | A framework to define display of relations of parallelism between shapes |
| DsgPrs_PerpenPresentation | A framework to define display of perpendicular constraints between shapes |
| DsgPrs_RadiusPresentation | A framework to define display of radii |
| DsgPrs_ShadedPlanePresentation | A framework to define display of shaded planes |
| DsgPrs_ShapeDirPresentation | A framework to define display of the normal to the surface of a shape |
| DsgPrs_SymbPresentation | A framework to define display of symbols |
| DsgPrs_SymmetricPresentation | A framework to define display of symmetry between shapes |
| DsgPrs_TangentPresentation | A framework to define display of tangents |
| DsgPrs_XYZAxisPresentation | A framework for displaying the axes of an XYZ trihedron |
| DsgPrs_XYZPlanePresentation | A framework for displaying the planes of an XYZ trihedron |
| ElCLib | Provides functions for basic geometric computations on elementary curves such as conics and lines in 2D and 3D space. This includes: |
| ElSLib | Provides functions for basic geometric computation on elementary surfaces. This includes: |
| Event | |
| Expr | This package describes the data structure of any expression, relation or function used in mathematics. It also describes the assignment of variables. Standard mathematical functions are implemented such as trigonometrics, hyperbolics, and log functions |
| Expr_Absolute | |
| Expr_ArcCosine | |
| Expr_ArcSine | |
| Expr_ArcTangent | |
| Expr_ArgCosh | |
| Expr_ArgSinh | |
| Expr_ArgTanh | |
| Expr_Array1OfGeneralExpression | |
| Expr_Array1OfNamedUnknown | |
| Expr_Array1OfSingleRelation | |
| Expr_BinaryExpression | Defines all binary expressions. The order of the two operands is significant |
| Expr_BinaryFunction | Defines the use of a binary function in an expression with given arguments |
| Expr_Cosh | |
| Expr_Cosine | |
| Expr_Difference | |
| Expr_Different | |
| Expr_Division | |
| Expr_Equal | |
| Expr_Exponential | |
| Expr_Exponentiate | |
| Expr_FunctionDerivative | |
| Expr_GeneralExpression | Defines the general purposes of any expression |
| Expr_GeneralFunction | Defines the general purposes of any function |
| Expr_GeneralRelation | Defines the general purposes of any relation between expressions |
| Expr_GreaterThan | |
| Expr_GreaterThanOrEqual | |
| Expr_IndexedMapNodeOfMapOfNamedUnknown | |
| Expr_LessThan | |
| Expr_LessThanOrEqual | |
| Expr_LogOf10 | |
| Expr_LogOfe | |
| Expr_MapOfNamedUnknown | |
| Expr_NamedConstant | Describes any numeric constant known by a special name (as PI, e,...) |
| Expr_NamedExpression | Describe an expression used by its name (as constants or variables). A single reference is made to a NamedExpression in every Expression (i.e. a NamedExpression is shared) |
| Expr_NamedFunction | |
| Expr_NamedUnknown | This class describes any variable of an expression. Assignment is treated directly in this class |
| Expr_NumericValue | This class describes any reel value defined in an expression |
| Expr_PolyExpression | |
| Expr_PolyFunction | Defines the use of an n-ary function in an expression with given arguments |
| Expr_Product | |
| Expr_RelationIterator | Iterates on every basic relation contained in a GeneralRelation |
| Expr_RUIterator | Iterates on NamedUnknowns in a GeneralRelation |
| Expr_SequenceNodeOfSequenceOfGeneralExpression | |
| Expr_SequenceNodeOfSequenceOfGeneralRelation | |
| Expr_SequenceOfGeneralExpression | |
| Expr_SequenceOfGeneralRelation | |
| Expr_Sign | |
| Expr_Sine | |
| Expr_SingleRelation | |
| Expr_Sinh | |
| Expr_Square | |
| Expr_SquareRoot | |
| Expr_Sum | |
| Expr_SystemRelation | |
| Expr_Tangent | |
| Expr_Tanh | |
| Expr_UnaryExpression | |
| Expr_UnaryFunction | Defines the use of an unary function in an expression with a given argument |
| Expr_UnaryMinus | |
| Expr_UnknownIterator | Describes an iterator on NamedUnknowns contained in any GeneralExpression |
| ExprIntrp | Describes an interpreter for GeneralExpressions, GeneralFunctions, and GeneralRelations defined in package Expr |
| ExprIntrp_Analysis | |
| ExprIntrp_Generator | Implements general services for interpretation of expressions |
| ExprIntrp_GenExp | This class permits, from a string, to create any kind of expression of package Expr by using built-in functions such as Sin,Cos, etc, and by creating variables |
| ExprIntrp_GenFct | Implements an interpreter for defining functions. All its functionnalities can be found in class GenExp |
| ExprIntrp_GenRel | Implements an interpreter for equations or system of equations made of expressions of package Expr |
| ExprIntrp_ListIteratorOfStackOfGeneralExpression | |
| ExprIntrp_ListIteratorOfStackOfGeneralFunction | |
| ExprIntrp_ListIteratorOfStackOfGeneralRelation | |
| ExprIntrp_ListNodeOfStackOfGeneralExpression | |
| ExprIntrp_ListNodeOfStackOfGeneralFunction | |
| ExprIntrp_ListNodeOfStackOfGeneralRelation | |
| ExprIntrp_SequenceNodeOfSequenceOfNamedExpression | |
| ExprIntrp_SequenceNodeOfSequenceOfNamedFunction | |
| ExprIntrp_SequenceOfNamedExpression | |
| ExprIntrp_SequenceOfNamedFunction | |
| ExprIntrp_StackOfGeneralExpression | |
| ExprIntrp_StackOfGeneralFunction | |
| ExprIntrp_StackOfGeneralRelation | |
| EXT_WINDOW | |
| Extrema_Array1OfPOnCurv | |
| Extrema_Array1OfPOnCurv2d | |
| Extrema_Array1OfPOnSurf | |
| Extrema_Array2OfPOnCurv | |
| Extrema_Array2OfPOnCurv2d | |
| Extrema_Array2OfPOnSurf | |
| Extrema_Array2OfPOnSurfParams | |
| Extrema_CCLocFOfLocECC | |
| Extrema_CCLocFOfLocECC2d | |
| Extrema_Curve2dTool | |
| Extrema_CurveTool | |
| Extrema_ECC | |
| Extrema_ECC2d | |
| Extrema_ELPCOfLocateExtPC | |
| Extrema_ELPCOfLocateExtPC2d | |
| Extrema_EPCOfELPCOfLocateExtPC | |
| Extrema_EPCOfELPCOfLocateExtPC2d | |
| Extrema_EPCOfExtPC | |
| Extrema_EPCOfExtPC2d | |
| Extrema_ExtCC | It calculates all the distance between two curves. These distances can be maximum or minimum |
| Extrema_ExtCC2d | It calculates all the distance between two curves. These distances can be maximum or minimum |
| Extrema_ExtCS | It calculates all the extremum distances between a curve and a surface. These distances can be minimum or maximum |
| Extrema_ExtElC | It calculates all the distance between two elementary curves. These distances can be maximum or minimum |
| Extrema_ExtElC2d | It calculates all the distance between two elementary curves. These distances can be maximum or minimum |
| Extrema_ExtElCS | It calculates all the distances between a curve and a surface. These distances can be maximum or minimum |
| Extrema_ExtElSS | It calculates all the distances between 2 elementary surfaces. These distances can be maximum or minimum |
| Extrema_ExtPC | |
| Extrema_ExtPC2d | |
| Extrema_ExtPElC | It calculates all the distances between a point and an elementary curve. These distances can be minimum or maximum |
| Extrema_ExtPElC2d | It calculates all the distances between a point and an elementary curve. These distances can be minimum or maximum |
| Extrema_ExtPElS | It calculates all the extremum distances between a point and a surface. These distances can be minimum or maximum |
| Extrema_ExtPExtS | It calculates all the extremum (minimum and maximum) distances between a point and a linear extrusion surface |
| Extrema_ExtPRevS | It calculates all the extremum (minimum and maximum) distances between a point and a surface of revolution |
| Extrema_ExtPS | It calculates all the extremum distances between a point and a surface. These distances can be minimum or maximum |
| Extrema_ExtSS | It calculates all the extremum distances between two surfaces. These distances can be minimum or maximum |
| Extrema_FuncExtCS | Function to find extrema of the distance between a curve and a surface |
| Extrema_FuncExtPS | Functional for search of extremum of the distance between point P and surface S, starting from approximate solution (u0, v0) |
| Extrema_FuncExtSS | Function to find extrema of the distance between two surfaces |
| Extrema_GenExtCS | It calculates all the extremum distances between acurve and a surface. These distances can be minimum or maximum |
| Extrema_GenExtPS | It calculates all the extremum distances between a point and a surface. These distances can be minimum or maximum |
| Extrema_GenExtSS | It calculates all the extremum distances between two surfaces. These distances can be minimum or maximum |
| Extrema_GenLocateExtCS | With two close points it calculates the distance between two surfaces. This distance can be a minimum or a maximum |
| Extrema_GenLocateExtPS | With a close point, it calculates the distance between a point and a surface. This distance can be a minimum or a maximum |
| Extrema_GenLocateExtSS | With two close points it calculates the distance between two surfaces. This distance can be a minimum or a maximum |
| Extrema_GlobOptFuncCCC0 | This class implements function which calculate Eucluidean distance between point on curve and point on other curve in case of C1 and C2 continuity is C0 |
| Extrema_GlobOptFuncCCC1 | This class implements function which calculate Eucluidean distance between point on curve and point on other curve in case of C1 and C2 continuity is C1 |
| Extrema_GlobOptFuncCCC2 | This class implements function which calculate Eucluidean distance between point on curve and point on other curve in case of C1 and C2 continuity is C2 |
| Extrema_GlobOptFuncCS | This class implements function which calculate square Eucluidean distance between point on curve and point on surface in case of continuity is C2 |
| Extrema_HArray1OfPOnCurv | |
| Extrema_HArray1OfPOnCurv2d | |
| Extrema_HArray1OfPOnSurf | |
| Extrema_HArray2OfPOnCurv | |
| Extrema_HArray2OfPOnCurv2d | |
| Extrema_HArray2OfPOnSurf | |
| Extrema_HArray2OfPOnSurfParams | |
| Extrema_LocateExtCC | It calculates the distance between two curves with a close point; these distances can be maximum or minimum |
| Extrema_LocateExtCC2d | It calculates the distance between two curves with a close point; these distances can be maximum or minimum |
| Extrema_LocateExtPC | |
| Extrema_LocateExtPC2d | |
| Extrema_LocECC | |
| Extrema_LocECC2d | |
| Extrema_LocEPCOfLocateExtPC | |
| Extrema_LocEPCOfLocateExtPC2d | |
| Extrema_PCFOfEPCOfELPCOfLocateExtPC | |
| Extrema_PCFOfEPCOfELPCOfLocateExtPC2d | |
| Extrema_PCFOfEPCOfExtPC | |
| Extrema_PCFOfEPCOfExtPC2d | |
| Extrema_PCLocFOfLocEPCOfLocateExtPC | |
| Extrema_PCLocFOfLocEPCOfLocateExtPC2d | |
| Extrema_POnCurv | |
| Extrema_POnCurv2d | |
| Extrema_POnSurf | Definition of a point on surface |
| Extrema_POnSurfParams | Data container for point on surface parameters. These parameters are required to compute an initial approximation for extrema computation |
| Extrema_SeqPCOfPCFOfEPCOfELPCOfLocateExtPC | |
| Extrema_SeqPCOfPCFOfEPCOfELPCOfLocateExtPC2d | |
| Extrema_SeqPCOfPCFOfEPCOfExtPC | |
| Extrema_SeqPCOfPCFOfEPCOfExtPC2d | |
| Extrema_SeqPCOfPCLocFOfLocEPCOfLocateExtPC | |
| Extrema_SeqPCOfPCLocFOfLocEPCOfLocateExtPC2d | |
| Extrema_SeqPOnCOfCCLocFOfLocECC | |
| Extrema_SeqPOnCOfCCLocFOfLocECC2d | |
| Extrema_SequenceNodeOfSeqPCOfPCFOfEPCOfELPCOfLocateExtPC | |
| Extrema_SequenceNodeOfSeqPCOfPCFOfEPCOfELPCOfLocateExtPC2d | |
| Extrema_SequenceNodeOfSeqPCOfPCFOfEPCOfExtPC | |
| Extrema_SequenceNodeOfSeqPCOfPCFOfEPCOfExtPC2d | |
| Extrema_SequenceNodeOfSeqPCOfPCLocFOfLocEPCOfLocateExtPC | |
| Extrema_SequenceNodeOfSeqPCOfPCLocFOfLocEPCOfLocateExtPC2d | |
| Extrema_SequenceNodeOfSeqPOnCOfCCLocFOfLocECC | |
| Extrema_SequenceNodeOfSeqPOnCOfCCLocFOfLocECC2d | |
| Extrema_SequenceNodeOfSequenceOfPOnCurv | |
| Extrema_SequenceNodeOfSequenceOfPOnCurv2d | |
| Extrema_SequenceNodeOfSequenceOfPOnSurf | |
| Extrema_SequenceOfPOnCurv | |
| Extrema_SequenceOfPOnCurv2d | |
| Extrema_SequenceOfPOnSurf | |
| FairCurve_Batten | Constructs curves with a constant or linearly increasing section to be used in the design of wooden or plastic battens. These curves are two-dimensional, and simulate physical splines or battens |
| FairCurve_BattenLaw | This class compute the Heigth of an batten |
| FairCurve_DistributionOfEnergy | Abstract class to use the Energy of an FairCurve |
| FairCurve_DistributionOfJerk | Compute the "Jerk" distribution |
| FairCurve_DistributionOfSagging | Compute the Sagging Distribution |
| FairCurve_DistributionOfTension | Compute the Tension Distribution |
| FairCurve_Energy | Necessary methodes to compute the energy of an FairCurve |
| FairCurve_EnergyOfBatten | Energy Criterium to minimize in Batten |
| FairCurve_EnergyOfMVC | Energy Criterium to minimize in MinimalVariationCurve |
| FairCurve_MinimalVariation | Computes a 2D curve using an algorithm which minimizes tension, sagging, and jerk energy. As in FairCurve_Batten, two reference points are used. Unlike that class, FairCurve_MinimalVariation requires curvature settings at the first and second reference points. These are defined by the rays of curvature desired at each point |
| FairCurve_Newton | Algorithme of Optimization used to make "FairCurve" |
| FEmTool_Assembly | Assemble and solve system from (one dimensional) Finite Elements |
| FEmTool_AssemblyTable | |
| FEmTool_Curve | Curve defined by Polynomial Elements |
| FEmTool_ElementaryCriterion | Defined J Criteria to used in minimisation |
| FEmTool_ElementsOfRefMatrix | This class describes the functions needed for calculating matrix elements of RefMatrix for linear criteriums (Tension, Flexsion and Jerk) by Gauss integration. Each function from set gives value Pi(u)'*Pj(u)' or Pi(u)''*Pj(u)'' or Pi(u)'''*Pj(u)''' for each i and j, where Pi(u) is i-th basis function of expansion and (') means derivative |
| FEmTool_HAssemblyTable | |
| FEmTool_LinearFlexion | Criterium of LinearFlexion To Hermit-Jacobi elements |
| FEmTool_LinearJerk | Criterion of LinearJerk To Hermit-Jacobi elements |
| FEmTool_LinearTension | Criterium of LinearTension To Hermit-Jacobi elements |
| FEmTool_ListIteratorOfListOfVectors | |
| FEmTool_ListNodeOfListOfVectors | |
| FEmTool_ListOfVectors | |
| FEmTool_ProfileMatrix | Symmetric Sparse ProfileMatrix useful for 1D Finite Element methods |
| FEmTool_SeqOfLinConstr | |
| FEmTool_SequenceNodeOfSeqOfLinConstr | |
| FEmTool_SparseMatrix | Sparse Matrix definition |
| FilletPoint | Private class. Corresponds to the point on the first curve, computed fillet function and derivative on it |
| FilletSurf_Builder | API giving the following geometric information about fillets list of corresponding NUBS surfaces for each surface: the 2 support faces on each face: the 3d curve and the corresponding 2d curve the 2d curves on the fillet status of start and end section of the fillet first and last parameter on edge of the fillet |
| FilletSurf_InternalBuilder | This class is private. It is used by the class Builder from FilletSurf. It computes geometric information about fillets |
| Font_BRepFont | This tool provides basic services for rendering of vectorized text glyphs as BRep shapes. Single instance initialize single font for sequential glyphs rendering with implicit caching of already rendered glyphs. Thus position of each glyph in the text is specified by shape location |
| Font_FontMgr | Collects and provides information about available fonts in system |
| Font_FTFont | Wrapper over FreeType font. Notice that this class uses internal buffers for loaded glyphs and it is absolutely UNSAFE to load/read glyph from concurrent threads! |
| Font_FTLibrary | Wrapper over FT_Library. Provides access to FreeType library |
| Font_SystemFont | Structure for store of Font System Information |
| FSD_BinaryFile | |
| FSD_CmpFile | |
| FSD_File | A general driver which defines as a file, the physical container for data to be stored or retrieved |
| FSD_FileHeader | |
| FWOSDriver | |
| FWOSDriver_DriverFactory | |
| GC_MakeArcOfCircle | Implements construction algorithms for an arc of circle in 3D space. The result is a Geom_TrimmedCurve curve. A MakeArcOfCircle object provides a framework for: |
| GC_MakeArcOfEllipse | Implements construction algorithms for an arc of ellipse in 3D space. The result is a Geom_TrimmedCurve curve. A MakeArcOfEllipse object provides a framework for: |
| GC_MakeArcOfHyperbola | Implements construction algorithms for an arc of hyperbola in 3D space. The result is a Geom_TrimmedCurve curve. A MakeArcOfHyperbola object provides a framework for: |
| GC_MakeArcOfParabola | Implements construction algorithms for an arc of parabola in 3D space. The result is a Geom_TrimmedCurve curve. A MakeArcOfParabola object provides a framework for: |
| GC_MakeCircle | This class implements the following algorithms used to create Cirlec from Geom |
| GC_MakeConicalSurface | This class implements the following algorithms used to create a ConicalSurface from Geom |
| GC_MakeCylindricalSurface | This class implements the following algorithms used to create a CylindricalSurface from Geom |
| GC_MakeEllipse | This class implements construction algorithms for an ellipse in 3D space. The result is a Geom_Ellipse ellipse. A MakeEllipse object provides a framework for: |
| GC_MakeHyperbola | This class implements construction algorithms for a hyperbola in 3D space. The result is a Geom_Hyperbola hyperbola. A MakeHyperbola object provides a framework for: |
| GC_MakeLine | This class implements the following algorithms used to create a Line from Geom |
| GC_MakeMirror | This class implements elementary construction algorithms for a symmetrical transformation in 3D space about a point, axis or plane. The result is a Geom_Transformation transformation. A MakeMirror object provides a framework for: |
| GC_MakePlane | This class implements the following algorithms used to create a Plane from gp |
| GC_MakeRotation | This class implements elementary construction algorithms for a rotation in 3D space. The result is a Geom_Transformation transformation. A MakeRotation object provides a framework for: |
| GC_MakeScale | This class implements an elementary construction algorithm for a scaling transformation in 3D space. The result is a Geom_Transformation transformation (a scaling transformation with the center point <Point> and the scaling value <Scale>). A MakeScale object provides a framework for: |
| GC_MakeSegment | Implements construction algorithms for a line segment in 3D space. Makes a segment of Line from the 2 points <P1> and <P2>. The result is a Geom_TrimmedCurve curve. A MakeSegment object provides a framework for: |
| GC_MakeTranslation | This class implements elementary construction algorithms for a translation in 3D space. The result is a Geom_Transformation transformation. A MakeTranslation object provides a framework for: |
| GC_MakeTrimmedCone | Implements construction algorithms for a trimmed cone limited by two planes orthogonal to its axis. The result is a Geom_RectangularTrimmedSurface surface. A MakeTrimmedCone provides a framework for: |
| GC_MakeTrimmedCylinder | Implements construction algorithms for a trimmed cylinder limited by two planes orthogonal to its axis. The result is a Geom_RectangularTrimmedSurface surface. A MakeTrimmedCylinder provides a framework for: |
| GC_Root | This class implements the common services for all classes of gce which report error |
| GccAna_Circ2d2TanOn | Describes functions for building a 2D circle |
| GccAna_Circ2d2TanRad | This class implements the algorithms used to create 2d circles tangent to 2 points/lines/circles and with a given radius. For each construction methods arguments are: |
| GccAna_Circ2d3Tan | This class implements the algorithms used to create 2d circles tangent to 3 points/lines/circles. The arguments of all construction methods are : |
| GccAna_Circ2dBisec | This class describes functions for building bisecting curves between two 2D circles. A bisecting curve between two circles is a curve such that each of its points is at the same distance from the two circles. It can be an ellipse, hyperbola, circle or line, depending on the relative position of the two circles. The algorithm computes all the elementary curves which are solutions. There is no solution if the two circles are coincident. A Circ2dBisec object provides a framework for: |
| GccAna_Circ2dTanCen | This class implements the algorithms used to create 2d circles tangent to an entity and centered on a point. The arguments of all construction methods are : |
| GccAna_Circ2dTanOnRad | This class implements the algorithms used to create a 2d circle tangent to a 2d entity, centered on a curv and with a given radius. The arguments of all construction methods are : |
| GccAna_CircLin2dBisec | Describes functions for building bisecting curves between a 2D line and a 2D circle. A bisecting curve between a circle and a line is a curve such that each of its points is at the same distance from the circle and the line. It can be a parabola or a line, depending of the relative position of the line and the circle. The algorithm computes all the elementary curves which are solutions. A CircLin2dBisec object provides a framework for: |
| GccAna_CircPnt2dBisec | Describes functions for building a bisecting curve between a 2D circle and a point. A bisecting curve between a circle and a point is such a curve that each of its points is at the same distance from the circle and the point. It can be an ellipse, hyperbola, circle or line, depending on the relative position of the point and the circle. The algorithm computes all the elementary curves which are solutions. A CircPnt2dBisec object provides a framework for: |
| GccAna_Lin2d2Tan | This class implements the algorithms used to create 2d lines tangent to 2 other elements which can be circles or points. Describes functions for building a 2D line: |
| GccAna_Lin2dBisec | Describes functions for building bisecting lines between two 2D lines. A bisecting line between two lines is such that each of its points is at the same distance from the two lines. If the two lines are secant, there are two orthogonal bisecting lines which share the angles made by the two straight lines in two equal parts. If D1 and D2 are the unit vectors of the two straight lines, those of the two bisecting lines are collinear with the following vectors: |
| GccAna_Lin2dTanObl | This class implements the algorithms used to create 2d line tangent to a circle or a point and making an angle with a line. The angle is in radians. The origin of the solution is the tangency point with the first argument. Its direction is making an angle Angle with the second argument |
| GccAna_Lin2dTanPar | This class implements the algorithms used to create 2d line tangent to a circle or a point and parallel to another line. The solution has the same orientation as the second argument. Describes functions for building a 2D line parallel to a line and: |
| GccAna_Lin2dTanPer | This class implements the algorithms used to create 2d lines tangent to a circle or a point and perpendicular to a line or a circle. Describes functions for building a 2D line perpendicular to a line and: |
| GccAna_LinPnt2dBisec | Describes functions for building bisecting curves between a 2D line and a point. A bisecting curve between a line and a point is such a curve that each of its points is at the same distance from the circle and the point. It can be a parabola or a line, depending on the relative position of the line and the circle. There is always one unique solution. A LinPnt2dBisec object provides a framework for: |
| GccAna_Pnt2dBisec | This class implements the algorithms used to create the bisecting line between two 2d points Describes functions for building a bisecting line between two 2D points. The bisecting line between two points is the bisector of the segment which joins the two points, if these are not coincident. The algorithm does not find a solution if the two points are coincident. A Pnt2dBisec object provides a framework for: |
| GccEnt | This package provides an implementation of the qualified entities useful to create 2d entities with geometric constraints. The qualifier explains which subfamily of solutions we want to obtain. It uses the following law: the matter/the interior side is at the left of the line, if we go from the beginning to the end. The qualifiers are: Enclosing : the solution(s) must enclose the argument. Enclosed : the solution(s) must be enclosed in the argument. Outside : both the solution(s) and the argument must be outside to each other. Unqualified : the position is undefined, so give all the solutions. The use of a qualifier is always required if such subfamilies exist. For example, it is not used for a point. Note: the interior of a curve is defined as the left-hand side of the curve in relation to its orientation |
| GccEnt_Array1OfPosition | |
| GccEnt_QualifiedCirc | Creates a qualified 2d Circle. A qualified 2D circle is a circle (gp_Circ2d circle) with a qualifier which specifies whether the solution of a construction algorithm using the qualified circle (as an argument): |
| GccEnt_QualifiedLin | Describes a qualified 2D line. A qualified 2D line is a line (gp_Lin2d line) with a qualifier which specifies whether the solution of a construction algorithm using the qualified line (as an argument): |
| GccInt_BCirc | Describes a circle as a bisecting curve between two 2D geometric objects (such as circles or points) |
| GccInt_BElips | Describes an ellipse as a bisecting curve between two 2D geometric objects (such as circles or points) |
| GccInt_BHyper | Describes a hyperbola as a bisecting curve between two 2D geometric objects (such as circles or points) |
| GccInt_Bisec | The deferred class GccInt_Bisec is the root class for elementary bisecting loci between two simple geometric objects (i.e. circles, lines or points). Bisecting loci between two geometric objects are such that each of their points is at the same distance from the two geometric objects. It is typically a curve, such as a line, circle or conic. Generally there is more than one elementary object which is the solution to a bisecting loci problem: each solution is described with one elementary bisecting locus. For example, the bisectors of two secant straight lines are two perpendicular straight lines. The GccInt package provides concrete implementations of the following elementary derived bisecting loci: |
| GccInt_BLine | Describes a line as a bisecting curve between two 2D geometric objects (such as lines, circles or points) |
| GccInt_BParab | Describes a parabola as a bisecting curve between two 2D geometric objects (such as lines, circles or points) |
| GccInt_BPoint | Describes a point as a bisecting object between two 2D geometric objects |
| GCE2d_MakeArcOfCircle | Implements construction algorithms for an arc of circle in the plane. The result is a Geom2d_TrimmedCurve curve. A MakeArcOfCircle object provides a framework for: |
| GCE2d_MakeArcOfEllipse | Implements construction algorithms for an arc of ellipse in the plane. The result is a Geom2d_TrimmedCurve curve. A MakeArcOfEllipse object provides a framework for: |
| GCE2d_MakeArcOfHyperbola | Implements construction algorithms for an arc of hyperbola in the plane. The result is a Geom2d_TrimmedCurve curve. A MakeArcOfHyperbola object provides a framework for: |
| GCE2d_MakeArcOfParabola | Implements construction algorithms for an arc of parabola in the plane. The result is a Geom2d_TrimmedCurve curve. A MakeArcOfParabola object provides a framework for: |
| GCE2d_MakeCircle | This class implements the following algorithms used to create Circle from Geom2d |
| GCE2d_MakeEllipse | This class implements the following algorithms used to create Ellipse from Geom2d |
| GCE2d_MakeHyperbola | This class implements the following algorithms used to create Hyperbola from Geom2d |
| GCE2d_MakeLine | This class implements the following algorithms used to create a Line from Geom2d |
| GCE2d_MakeMirror | This class implements elementary construction algorithms for a symmetrical transformation in 2D space about a point or axis. The result is a Geom2d_Transformation transformation. A MakeMirror object provides a framework for: |
| GCE2d_MakeParabola | This class implements the following algorithms used to create Parabola from Geom2d |
| GCE2d_MakeRotation | This class implements an elementary construction algorithm for a rotation in 2D space. The result is a Geom2d_Transformation transformation. A MakeRotation object provides a framework for: |
| GCE2d_MakeScale | This class implements an elementary construction algorithm for a scaling transformation in 2D space. The result is a Geom2d_Transformation transformation. A MakeScale object provides a framework for: |
| GCE2d_MakeSegment | Implements construction algorithms for a line segment in the plane. The result is a Geom2d_TrimmedCurve curve. A MakeSegment object provides a framework for: |
| GCE2d_MakeTranslation | This class implements elementary construction algorithms for a translation in 2D space. The result is a Geom2d_Transformation transformation. A MakeTranslation object provides a framework for: |
| GCE2d_Root | This class implements the common services for all classes of gce which report error |
| gce_MakeCirc | This class implements the following algorithms used to create Circ from gp |
| gce_MakeCirc2d | This class implements the following algorithms used to create Circ2d from gp |
| gce_MakeCone | This class implements the following algorithms used to create a Cone from gp |
| gce_MakeCylinder | This class implements the following algorithms used to create a Cylinder from gp |
| gce_MakeDir | This class implements the following algorithms used to create a Dir from gp |
| gce_MakeDir2d | This class implements the following algorithms used to create a Dir2d from gp |
| gce_MakeElips | This class implements the following algorithms used to create an ellipse from gp |
| gce_MakeElips2d | This class implements the following algorithms used to create Elips2d from gp |
| gce_MakeHypr | This class implements the following algorithms used to create Hyperbola from gp |
| gce_MakeHypr2d | This class implements the following algorithms used to create a 2d Hyperbola from gp |
| gce_MakeLin | This class implements the following algorithms used to create a Lin from gp |
| gce_MakeLin2d | This class implements the following algorithms used to create Lin2d from gp |
| gce_MakeMirror | This class mplements elementary construction algorithms for a symmetrical transformation in 3D space about a point, axis or plane. The result is a gp_Trsf transformation. A MakeMirror object provides a framework for: |
| gce_MakeMirror2d | This class implements elementary construction algorithms for a symmetrical transformation in 2D space about a point or axis. The result is a gp_Trsf2d transformation. A MakeMirror2d object provides a framework for: |
| gce_MakeParab | This class implements the following algorithms used to create Parab from gp. Defines the parabola in the parameterization range : ]-infinite, +infinite[ The vertex of the parabola is the "Location" point of the local coordinate system (axis placement) of the parabola |
| gce_MakeParab2d | This class implements the following algorithms used to create Parab2d from gp. Defines an infinite parabola. An axis placement one axis defines the local cartesian coordinate system ("XAxis") of the parabola. The vertex of the parabola is the "Location" point of the local coordinate system of the parabola. The "XAxis" of the parabola is its axis of symmetry. The "XAxis" is oriented from the vertex of the parabola to the Focus of the parabola. The "YAxis" is parallel to the directrix of the parabola and its "Location" point is the vertex of the parabola. The equation of the parabola in the local coordinate system is Y**2 = (2*P) * X P is the distance between the focus and the directrix of the parabola called Parameter). The focal length F = P/2 is the distance between the vertex and the focus of the parabola |
| gce_MakePln | This class implements the following algorithms used to create a Plane from gp |
| gce_MakeRotation | This class implements elementary construction algorithms for a rotation in 3D space. The result is a gp_Trsf transformation. A MakeRotation object provides a framework for: |
| gce_MakeRotation2d | Implements an elementary construction algorithm for a rotation in 2D space. The result is a gp_Trsf2d transformation. A MakeRotation2d object provides a framework for: |
| gce_MakeScale | Implements an elementary construction algorithm for a scaling transformation in 3D space. The result is a gp_Trsf transformation. A MakeScale object provides a framework for: |
| gce_MakeScale2d | This class implements an elementary construction algorithm for a scaling transformation in 2D space. The result is a gp_Trsf2d transformation. A MakeScale2d object provides a framework for: |
| gce_MakeTranslation | This class implements elementary construction algorithms for a translation in 3D space. The result is a gp_Trsf transformation. A MakeTranslation object provides a framework for: |
| gce_MakeTranslation2d | This class implements elementary construction algorithms for a translation in 2D space. The result is a gp_Trsf2d transformation. A MakeTranslation2d object provides a framework for: |
| gce_Root | This class implements the common services for all classes of gce which report error |
| GCPnts_AbscissaPoint | Provides an algorithm to compute a point on a curve situated at a given distance from another point on the curve, the distance being measured along the curve (curvilinear abscissa on the curve). This algorithm is also used to compute the length of a curve. An AbscissaPoint object provides a framework for: |
| GCPnts_QuasiUniformAbscissa | This class provides an algorithm to compute a uniform abscissa distribution of points on a curve, i.e. a sequence of equidistant points. The distance between two consecutive points is measured along the curve. The distribution is defined: |
| GCPnts_QuasiUniformDeflection | This class computes a distribution of points on a curve. The points may respect the deflection. The algorithm is not based on the classical prediction (with second derivative of curve), but either on the evaluation of the distance between the mid point and the point of mid parameter of the two points, or the distance between the mid point and the point at parameter 0.5 on the cubic interpolation of the two points and their tangents. Note: this algorithm is faster than a GCPnts_UniformDeflection algorithm, and is able to work with non-"C2" continuous curves. However, it generates more points in the distribution |
| GCPnts_TangentialDeflection | Computes a set of points on a curve from package Adaptor3d such as between two successive points P1(u1)and P2(u2) : |
| GCPnts_UniformAbscissa | This class allows to compute a uniform distribution of points on a curve (ie the points will all be equally distant) |
| GCPnts_UniformDeflection | Provides an algorithm to compute a distribution of points on a 'C2' continuous curve. The algorithm respects a criterion of maximum deflection between the curve and the polygon that results from the computed points. Note: This algorithm is relatively time consuming. A GCPnts_QuasiUniformDeflection algorithm is quicker; it can also work with non-'C2' continuous curves, but it generates more points in the distribution |
| Geom2d_AxisPlacement | Describes an axis in 2D space. An axis is defined by: |
| Geom2d_BezierCurve | Describes a rational or non-rational Bezier curve |
| Geom2d_BoundedCurve | The abstract class BoundedCurve describes the common behavior of bounded curves in 2D space. A bounded curve is limited by two finite values of the parameter, termed respectively "first parameter" and "last parameter". The "first parameter" gives the "start point" of the bounded curve, and the "last parameter" gives the "end point" of the bounded curve. The length of a bounded curve is finite. The Geom2d package provides three concrete classes of bounded curves: |
| Geom2d_BSplineCurve | Describes a BSpline curve. A BSpline curve can be: |
| Geom2d_CartesianPoint | Describes a point in 2D space. A Geom2d_CartesianPoint is defined by a gp_Pnt2d point, with its two Cartesian coordinates X and Y |
| Geom2d_Circle | Describes a circle in the plane (2D space). A circle is defined by its radius and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where the origin is the center of the circle. The coordinate system is the local coordinate system of the circle. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the circle, determining the direction in which the parameter increases along the circle. The Geom2d_Circle circle is parameterized by an angle: P(U) = O + R*Cos(U)*XDir + R*Sin(U)*YDir where: |
| Geom2d_Conic | The abstract class Conic describes the common behavior of conic curves in 2D space and, in particular, their general characteristics. The Geom2d package provides four specific classes of conics: Geom2d_Circle, Geom2d_Ellipse, Geom2d_Hyperbola and Geom2d_Parabola. A conic is positioned in the plane with a coordinate system (gp_Ax22d object), where the origin is the center of the conic (or the apex in case of a parabola). This coordinate system is the local coordinate system of the conic. It gives the conic an explicit orientation, determining the direction in which the parameter increases along the conic. The "X Axis" of the local coordinate system also defines the origin of the parameter of the conic |
| Geom2d_Curve | The abstract class Curve describes the common behavior of curves in 2D space. The Geom2d package provides numerous concrete classes of derived curves, including lines, circles, conics, Bezier or BSpline curves, etc. The main characteristic of these curves is that they are parameterized. The Geom2d_Curve class shows: |
| Geom2d_Direction | The class Direction specifies a vector that is never null. It is a unit vector |
| Geom2d_Ellipse | Describes an ellipse in the plane (2D space). An ellipse is defined by its major and minor radii and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where: |
| Geom2d_Geometry | The general abstract class Geometry in 2D space describes the common behaviour of all the geometric entities |
| Geom2d_Hyperbola | Describes a branch of a hyperbola in the plane (2D space). A hyperbola is defined by its major and minor radii and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where: |
| Geom2d_Line | Describes an infinite line in the plane (2D space). A line is defined and positioned in the plane with an axis (gp_Ax2d object) which gives it an origin and a unit vector. The Geom2d_Line line is parameterized as follows: P (U) = O + U*Dir where: |
| Geom2d_OffsetCurve | This class implements the basis services for the creation, edition, modification and evaluation of planar offset curve. The offset curve is obtained by offsetting by distance along the normal to a basis curve defined in 2D space. The offset curve in this package can be a self intersecting curve even if the basis curve does not self-intersect. The self intersecting portions are not deleted at the construction time. An offset curve is a curve at constant distance (Offset) from a basis curve and the offset curve takes its parametrization from the basis curve. The Offset curve is in the direction of the normal to the basis curve N. The distance offset may be positive or negative to indicate the preferred side of the curve : . distance offset >0 => the curve is in the direction of N . distance offset >0 => the curve is in the direction of - N On the Offset curve : Value(u) = BasisCurve.Value(U) + (Offset * (T ^ Z)) / ||T ^ Z|| where T is the tangent vector to the basis curve and Z the direction of the normal vector to the plane of the curve, N = T ^ Z defines the offset direction and should not have null length |
| Geom2d_Parabola | Describes a parabola in the plane (2D space). A parabola is defined by its focal length (i.e. the distance between its focus and its apex) and is positioned in the plane with a coordinate system (gp_Ax22d object) where: |
| Geom2d_Point | The abstract class Point describes the common behavior of geometric points in 2D space. The Geom2d package also provides the concrete class Geom2d_CartesianPoint |
| Geom2d_Transformation | The class Transformation allows to create Translation, Rotation, Symmetry, Scaling and complex transformations obtained by combination of the previous elementary transformations. The Transformation class can also be used to construct complex transformations by combining these elementary transformations. However, these transformations can never change the type of an object. For example, the projection transformation can change a circle into an ellipse, and therefore change the real type of the object. Such a transformation is forbidden in this environment and cannot be a Geom2d_Transformation. The transformation can be represented as follow : |
| Geom2d_TrimmedCurve | Defines a portion of a curve limited by two values of parameters inside the parametric domain of the curve. The trimmed curve is defined by: |
| Geom2d_Vector | The abstract class Vector describes the common behavior of vectors in 2D space. The Geom2d package provides two concrete classes of vectors: Geom2d_Direction (unit vector) and Geom2d_VectorWithMagnitude |
| Geom2d_VectorWithMagnitude | Defines a vector with magnitude. A vector with magnitude can have a zero length |
| Geom2dAdaptor | This package contains the geometric definition of 2d curves compatible with the Adaptor package templates |
| Geom2dAdaptor_Curve | An interface between the services provided by any curve from the package Geom2d and those required of the curve by algorithms which use it |
| Geom2dAdaptor_GHCurve | |
| Geom2dAdaptor_HCurve | Provides an interface between the services provided by any curve from the package Geom2d and those required of the curve by algorithms, which use it |
| Geom2dAPI_ExtremaCurveCurve | Describes functions for computing all the extrema between two 2D curves. An ExtremaCurveCurve algorithm minimizes or maximizes the distance between a point on the first curve and a point on the second curve. Thus, it computes the start point and end point of perpendiculars common to the two curves (an intersection point is not an extremum except where the two curves are tangential at this point). Solutions consist of pairs of points, and an extremum is considered to be a segment joining the two points of a solution. An ExtremaCurveCurve object provides a framework for: |
| Geom2dAPI_InterCurveCurve | This class implements methods for computing |
| Geom2dAPI_Interpolate | This class is used to interpolate a BsplineCurve passing through an array of points, with a C2 Continuity if tangency is not requested at the point. If tangency is requested at the point the continuity will be C1. If Perodicity is requested the curve will be closed and the junction will be the first point given. The curve will than be only C1 The curve is defined by a table of points through which it passes, and if required by a parallel table of reals which gives the value of the parameter of each point through which the resulting BSpline curve passes, and by vectors tangential to these points. An Interpolate object provides a framework for: defining the constraints of the BSpline curve, |
| Geom2dAPI_PointsToBSpline | This class is used to approximate a BsplineCurve passing through an array of points, with a given Continuity. Describes functions for building a 2D BSpline curve which approximates a set of points. A PointsToBSpline object provides a framework for: |
| Geom2dAPI_ProjectPointOnCurve | This class implements methods for computing all the orthogonal projections of a 2D point onto a 2D curve |
| Geom2dConvert | This package provides an implementation of algorithmes to do the conversion between equivalent geometric entities from package Geom2d. It gives the possibility : . to obtain the B-spline representation of bounded curves. . to split a B-spline curve into several B-spline curves with some constraints of continuity, . to convert a B-spline curve into several Bezier curves or surfaces. All the geometric entities used in this package are bounded. References : . Generating the Bezier Points of B-spline curves and surfaces (Wolfgang Bohm) CAGD volume 13 number 6 november 1981 . On NURBS: A Survey (Leslie Piegl) IEEE Computer Graphics and Application January 1991 . Curve and surface construction using rational B-splines (Leslie Piegl and Wayne Tiller) CAD Volume 19 number 9 november 1987 . A survey of curve and surface methods in CAGD (Wolfgang BOHM) CAGD 1 1984 |
| Geom2dConvert_ApproxCurve | A framework to convert a 2D curve to a BSpline. This is done by approximation within a given tolerance |
| Geom2dConvert_BSplineCurveKnotSplitting | An algorithm to determine points at which a BSpline curve should be split in order to obtain arcs of the same continuity. If you require curves with a minimum continuity for your computation, it is useful to know the points between which an arc has a continuity of a given order. The continuity order is given at the construction time. For a BSpline curve, the discontinuities are localized at the knot values. Between two knot values the BSpline is infinitely and continuously differentiable. At a given knot, the continuity is equal to: Degree - Mult, where Degree is the degree of the BSpline curve and Mult is the multiplicity of the knot. It is possible to compute the arcs which correspond to this splitting using the global function SplitBSplineCurve provided by the package Geom2dConvert. A BSplineCurveKnotSplitting object provides a framework for: |
| Geom2dConvert_BSplineCurveToBezierCurve | An algorithm to convert a BSpline curve into a series of adjacent Bezier curves. A BSplineCurveToBezierCurve object provides a framework for: |
| Geom2dConvert_CompCurveToBSplineCurve | This algorithm converts and concat several curve in an BSplineCurve |
| Geom2dGcc | The Geom2dGcc package describes qualified 2D curves used in the construction of constrained geometric objects by an algorithm provided by the Geom2dGcc package. A qualified 2D curve is a curve with a qualifier which specifies whether the solution of a construction algorithm using the qualified curve (as an argument): |
| Geom2dGcc_Circ2d2TanOn | This class implements the algorithms used to create 2d circles TANgent to 2 entities and having the center ON a curve. The order of the tangency argument is always QualifiedCirc, QualifiedLin, QualifiedCurv, Pnt2d. the arguments are : |
| Geom2dGcc_Circ2d2TanOnGeo | This class implements the algorithms used to create 2d circles TANgent to 2 entities and having the center ON a curve. The order of the tangency argument is always QualifiedCirc, QualifiedLin, QualifiedCurv, Pnt2d. the arguments are : |
| Geom2dGcc_Circ2d2TanOnIter | This class implements the algorithms used to create 2d circles TANgent to 2 entities and having the center ON a curv. The order of the tangency argument is always QualifiedCirc, QualifiedLin, QualifiedCurv, Pnt2d. the arguments are : |
| Geom2dGcc_Circ2d2TanRad | This class implements the algorithms used to create 2d circles tangent to one curve and a point/line/circle/curv and with a given radius. For each construction methods arguments are: |
| Geom2dGcc_Circ2d2TanRadGeo | This class implements the algorithms used to create 2d circles tangent to one curve and a point/line/circle/curv and with a given radius. For each construction methods arguments are: |
| Geom2dGcc_Circ2d3Tan | This class implements the algorithms used to create 2d circles tangent to 3 points/lines/circles/ curves with one curve or more. The arguments of all construction methods are : |
| Geom2dGcc_Circ2d3TanIter | This class implements the algorithms used to create 2d circles tangent to 3 points/lines/circles/ curves with one curve or more. The arguments of all construction methods are : |
| Geom2dGcc_Circ2dTanCen | This class implements the algorithms used to create 2d circles tangent to a curve and centered on a point. The arguments of all construction methods are : |
| Geom2dGcc_Circ2dTanCenGeo | This class implements the algorithms used to create 2d circles tangent to a curve and centered on a point. The arguments of all construction methods are : |
| Geom2dGcc_Circ2dTanOnRad | This class implements the algorithms used to create a 2d circle tangent to a 2d entity, centered on a 2d entity and with a given radius. More than one argument must be a curve. The arguments of all construction methods are : |
| Geom2dGcc_Circ2dTanOnRadGeo | This class implements the algorithms used to create a 2d circle tangent to a 2d entity, centered on a 2d entity and with a given radius. More than one argument must be a curve. The arguments of all construction methods are : |
| Geom2dGcc_CurveTool | |
| Geom2dGcc_CurveToolGeo | |
| Geom2dGcc_FunctionTanCirCu | This abstract class describes a Function of 1 Variable used to find a line tangent to a curve and a circle |
| Geom2dGcc_FunctionTanCuCu | This abstract class describes a Function of 1 Variable used to find a line tangent to two curves |
| Geom2dGcc_FunctionTanCuCuCu | This abstract class describes a set on N Functions of M independant variables |
| Geom2dGcc_FunctionTanCuCuOnCu | This abstract class describes a set on N Functions of M independant variables |
| Geom2dGcc_FunctionTanCuPnt | This abstract class describes a Function of 1 Variable used to find a line tangent to a curve and passing through a point |
| Geom2dGcc_FunctionTanObl | This class describe a function of a single variable |
| Geom2dGcc_Lin2d2Tan | This class implements the algorithms used to create 2d lines tangent to 2 other elements which can be circles, curves or points. More than one argument must be a curve. Describes functions for building a 2D line: |
| Geom2dGcc_Lin2d2TanIter | This class implements the algorithms used to create 2d lines tangent to 2 other elements which can be circles, curves or points. More than one argument must be a curve |
| Geom2dGcc_Lin2dTanObl | This class implements the algorithms used to create 2d line tangent to a curve QualifiedCurv and doing an angle Angle with a line TheLin. The angle must be in Radian. Describes functions for building a 2D line making a given angle with a line and tangential to a curve. A Lin2dTanObl object provides a framework for: |
| Geom2dGcc_Lin2dTanOblIter | This class implements the algorithms used to create 2d line tangent to a curve QualifiedCurv and doing an angle Angle with a line TheLin. The angle must be in Radian |
| Geom2dGcc_QCurve | Creates a qualified 2d line |
| Geom2dGcc_QualifiedCurve | Describes functions for building a qualified 2D curve. A qualified 2D curve is a curve with a qualifier which specifies whether the solution of a construction algorithm using the qualified curve (as an argument): |
| Geom2dHatch_Classifier | |
| Geom2dHatch_DataMapIteratorOfHatchings | |
| Geom2dHatch_DataMapIteratorOfMapOfElements | |
| Geom2dHatch_DataMapNodeOfHatchings | |
| Geom2dHatch_DataMapNodeOfMapOfElements | |
| Geom2dHatch_Element | |
| Geom2dHatch_Elements | |
| Geom2dHatch_FClass2dOfClassifier | |
| Geom2dHatch_Hatcher | |
| Geom2dHatch_Hatching | |
| Geom2dHatch_Hatchings | |
| Geom2dHatch_Intersector | |
| Geom2dHatch_MapOfElements | |
| Geom2dInt_ExactIntersectionPointOfTheIntPCurvePCurveOfGInter | |
| Geom2dInt_Geom2dCurveTool | This class provides a Geom2dCurveTool as < Geom2dCurveTool from IntCurve > from a Tool as < Geom2dCurveTool from Adaptor3d > |
| Geom2dInt_GInter | |
| Geom2dInt_IntConicCurveOfGInter | |
| Geom2dInt_MyImpParToolOfTheIntersectorOfTheIntConicCurveOfGInter | |
| Geom2dInt_PCLocFOfTheLocateExtPCOfTheProjPCurOfGInter | |
| Geom2dInt_SeqPCOfPCLocFOfTheLocateExtPCOfTheProjPCurOfGInter | |
| Geom2dInt_SequenceNodeOfSeqPCOfPCLocFOfTheLocateExtPCOfTheProjPCurOfGInter | |
| Geom2dInt_TheCurveLocatorOfTheProjPCurOfGInter | |
| Geom2dInt_TheDistBetweenPCurvesOfTheIntPCurvePCurveOfGInter | |
| Geom2dInt_TheIntConicCurveOfGInter | |
| Geom2dInt_TheIntersectorOfTheIntConicCurveOfGInter | |
| Geom2dInt_TheIntPCurvePCurveOfGInter | |
| Geom2dInt_TheLocateExtPCOfTheProjPCurOfGInter | |
| Geom2dInt_ThePolygon2dOfTheIntPCurvePCurveOfGInter | |
| Geom2dInt_TheProjPCurOfGInter | |
| Geom2dLProp_CLProps2d | |
| Geom2dLProp_CurAndInf2d | An algorithm for computing local properties of a curve. These properties include: |
| Geom2dLProp_Curve2dTool | |
| Geom2dLProp_FuncCurExt | Function used to find the extremas of curvature in 2d |
| Geom2dLProp_FuncCurNul | Function used to find the inflections in 2d |
| Geom2dLProp_NumericCurInf2d | Computes the locals extremas of curvature and the inflections of a bounded curve in 2d |
| Geom2dToIGES_Geom2dCurve | This class implements the transfer of the Curve Entity from Geom2d To IGES. These can be : Curve . BoundedCurve |
| Geom2dToIGES_Geom2dEntity | Methods to transfer Geom2d entity from CASCADE to IGES |
| Geom2dToIGES_Geom2dPoint | This class implements the transfer of the Point Entity from Geom2d to IGES . These are : . 2dPoint |
| Geom2dToIGES_Geom2dVector | This class implements the transfer of the Vector from Geom2d to IGES . These can be : . Vector |
| Geom_Axis1Placement | Describes an axis in 3D space. An axis is defined by: |
| Geom_Axis2Placement | Describes a right-handed coordinate system in 3D space. A coordinate system is defined by: |
| Geom_AxisPlacement | The abstract class AxisPlacement describes the common behavior of positioning systems in 3D space, such as axis or coordinate systems. The Geom package provides two implementations of 3D positioning systems: |
| Geom_BezierCurve | Describes a rational or non-rational Bezier curve |
| Geom_BezierSurface | Describes a rational or non-rational Bezier surface |
| Geom_BoundedCurve | The abstract class BoundedCurve describes the common behavior of bounded curves in 3D space. A bounded curve is limited by two finite values of the parameter, termed respectively "first parameter" and "last parameter". The "first parameter" gives the "start point" of the bounded curve, and the "last parameter" gives the "end point" of the bounded curve. The length of a bounded curve is finite. The Geom package provides three concrete classes of bounded curves: |
| Geom_BoundedSurface | The root class for bounded surfaces in 3D space. A bounded surface is defined by a rectangle in its 2D parametric space, i.e |
| Geom_BSplineCurve | Definition of the B_spline curve. A B-spline curve can be Uniform or non-uniform Rational or non-rational Periodic or non-periodic |
| Geom_BSplineSurface | Describes a BSpline surface. In each parametric direction, a BSpline surface can be: |
| Geom_CartesianPoint | Describes a point in 3D space. A Geom_CartesianPoint is defined by a gp_Pnt point, with its three Cartesian coordinates X, Y and Z |
| Geom_Circle | Describes a circle in 3D space. A circle is defined by its radius and, as with any conic curve, is positioned in space with a right-handed coordinate system (gp_Ax2 object) where: |
| Geom_Conic | The abstract class Conic describes the common behavior of conic curves in 3D space and, in particular, their general characteristics. The Geom package provides four concrete classes of conics: Geom_Circle, Geom_Ellipse, Geom_Hyperbola and Geom_Parabola. A conic is positioned in space with a right-handed coordinate system (gp_Ax2 object), where: |
| Geom_ConicalSurface | Describes a cone. A cone is defined by the half-angle at its apex, and is positioned in space by a coordinate system (a gp_Ax3 object) and a reference radius as follows: |
| Geom_Curve | The abstract class Curve describes the common behavior of curves in 3D space. The Geom package provides numerous concrete classes of derived curves, including lines, circles, conics, Bezier or BSpline curves, etc. The main characteristic of these curves is that they are parameterized. The Geom_Curve class shows: |
| Geom_CylindricalSurface | This class defines the infinite cylindrical surface |
| Geom_Direction | The class Direction specifies a vector that is never null. It is a unit vector |
| Geom_ElementarySurface | Describes the common behavior of surfaces which have a simple parametric equation in a local coordinate system. The Geom package provides several implementations of concrete elementary surfaces: |
| Geom_Ellipse | Describes an ellipse in 3D space. An ellipse is defined by its major and minor radii and, as with any conic curve, is positioned in space with a right-handed coordinate system (gp_Ax2 object) where: |
| Geom_Geometry | The abstract class Geometry for 3D space is the root class of all geometric objects from the Geom package. It describes the common behavior of these objects when: |
| Geom_HSequenceOfBSplineSurface | |
| Geom_Hyperbola | Describes a branch of a hyperbola in 3D space. A hyperbola is defined by its major and minor radii and, as with any conic curve, is positioned in space with a right-handed coordinate system (gp_Ax2 object) where: |
| Geom_Line | Describes an infinite line. A line is defined and positioned in space with an axis (gp_Ax1 object) which gives it an origin and a unit vector. The Geom_Line line is parameterized: P (U) = O + U*Dir, where: |
| Geom_OffsetCurve | This class implements the basis services for an offset curve in 3D space. The Offset curve in this package can be a self intersecting curve even if the basis curve does not self-intersect. The self intersecting portions are not deleted at the construction time. An offset curve is a curve at constant distance (Offset) from a basis curve in a reference direction V. The offset curve takes its parametrization from the basis curve. The Offset curve is in the direction of the normal N defined with the cross product T^V, where the vector T is given by the first derivative on the basis curve with non zero length. The distance offset may be positive or negative to indicate the preferred side of the curve : . distance offset >0 => the curve is in the direction of N . distance offset <0 => the curve is in the direction of - N |
| Geom_OffsetSurface | Describes an offset surface in 3D space. An offset surface is defined by: |
| Geom_OsculatingSurface | |
| Geom_Parabola | Describes a parabola in 3D space. A parabola is defined by its focal length (i.e. the distance between its focus and its apex) and is positioned in space with a coordinate system (gp_Ax2 object) where: |
| Geom_Plane | Describes a plane in 3D space. A plane is positioned in space by a coordinate system (a gp_Ax3 object) such that the plane is defined by the origin, "X Direction" and "Y Direction" of this coordinate system. This coordinate system is the "local coordinate system" of the plane. The following apply: |
| Geom_Point | The abstract class Point describes the common behavior of geometric points in 3D space. The Geom package also provides the concrete class Geom_CartesianPoint |
| Geom_RectangularTrimmedSurface | Describes a portion of a surface (a patch) limited by two values of the u parameter in the u parametric direction, and two values of the v parameter in the v parametric direction. The domain of the trimmed surface must be within the domain of the surface being trimmed. The trimmed surface is defined by: |
| Geom_SequenceNodeOfSequenceOfBSplineSurface | |
| Geom_SequenceOfBSplineSurface | |
| Geom_SphericalSurface | Describes a sphere. A sphere is defined by its radius, and is positioned in space by a coordinate system (a gp_Ax3 object), the origin of which is the center of the sphere. This coordinate system is the "local coordinate system" of the sphere. The following apply: |
| Geom_Surface | Describes the common behavior of surfaces in 3D space. The Geom package provides many implementations of concrete derived surfaces, such as planes, cylinders, cones, spheres and tori, surfaces of linear extrusion, surfaces of revolution, Bezier and BSpline surfaces, and so on. The key characteristic of these surfaces is that they are parameterized. Geom_Surface demonstrates: |
| Geom_SurfaceOfLinearExtrusion | Describes a surface of linear extrusion ("extruded surface"), e.g. a generalized cylinder. Such a surface is obtained by sweeping a curve (called the "extruded curve" or "basis") in a given direction (referred to as the "direction of extrusion" and defined by a unit vector). The u parameter is along the extruded curve. The v parameter is along the direction of extrusion. The parameter range for the u parameter is defined by the reference curve. The parameter range for the v parameter is ] - infinity, + infinity [. The position of the curve gives the origin of the v parameter. The surface is "CN" in the v parametric direction. The form of a surface of linear extrusion is generally a ruled surface (GeomAbs_RuledForm). It can be: |
| Geom_SurfaceOfRevolution | Describes a surface of revolution (revolved surface). Such a surface is obtained by rotating a curve (called the "meridian") through a complete revolution about an axis (referred to as the "axis of revolution"). The curve and the axis must be in the same plane (the "reference plane" of the surface). Rotation around the axis of revolution in the trigonometric sense defines the u parametric direction. So the u parameter is an angle, and its origin is given by the position of the meridian on the surface. The parametric range for the u parameter is: [ 0, 2.*Pi ] The v parameter is that of the meridian. Note: A surface of revolution is built from a copy of the original meridian. As a result the original meridian is not modified when the surface is modified. The form of a surface of revolution is typically a general revolution surface (GeomAbs_RevolutionForm). It can be: |
| Geom_SweptSurface | Describes the common behavior for surfaces constructed by sweeping a curve with another curve. The Geom package provides two concrete derived surfaces: surface of revolution (a revolved surface), and surface of linear extrusion (an extruded surface) |
| Geom_ToroidalSurface | Describes a torus. A torus is defined by its major and minor radii, and positioned in space with a coordinate system (a gp_Ax3 object) as follows: |
| Geom_Transformation | Describes how to construct the following elementary transformations |
| Geom_TrimmedCurve | Describes a portion of a curve (termed the "basis curve") limited by two parameter values inside the parametric domain of the basis curve. The trimmed curve is defined by: |
| Geom_Vector | The abstract class Vector describes the common behavior of vectors in 3D space. The Geom package provides two concrete classes of vectors: Geom_Direction (unit vector) and Geom_VectorWithMagnitude |
| Geom_VectorWithMagnitude | Defines a vector with magnitude. A vector with magnitude can have a zero length |
| GeomAdaptor | This package contains the geometric definition of curve and surface necessary to use algorithmes |
| GeomAdaptor_Curve | This class provides an interface between the services provided by any curve from the package Geom and those required of the curve by algorithms which use it. Creation of the loaded curve the curve is C1 by piece |
| GeomAdaptor_GHCurve | |
| GeomAdaptor_GHSurface | |
| GeomAdaptor_HCurve | An interface between the services provided by any curve from the package Geom and those required of the curve by algorithms which use it |
| GeomAdaptor_HSurface | An interface between the services provided by any surface from the package Geom and those required of the surface by algorithms which use it. Provides a surface handled by reference |
| GeomAdaptor_Surface | An interface between the services provided by any surface from the package Geom and those required of the surface by algorithms which use it. Creation of the loaded surface the surface is C1 by piece |
| GeomAPI | The GeomAPI package provides an Application Programming Interface for the Geometry |
| GeomAPI_ExtremaCurveCurve | Describes functions for computing all the extrema between two 3D curves. An ExtremaCurveCurve algorithm minimizes or maximizes the distance between a point on the first curve and a point on the second curve. Thus, it computes start and end points of perpendiculars common to the two curves (an intersection point is not an extremum unless the two curves are tangential at this point). Solutions consist of pairs of points, and an extremum is considered to be a segment joining the two points of a solution. An ExtremaCurveCurve object provides a framework for: |
| GeomAPI_ExtremaCurveSurface | Describes functions for computing all the extrema between a curve and a surface. An ExtremaCurveSurface algorithm minimizes or maximizes the distance between a point on the curve and a point on the surface. Thus, it computes start and end points of perpendiculars common to the curve and the surface (an intersection point is not an extremum except where the curve and the surface are tangential at this point). Solutions consist of pairs of points, and an extremum is considered to be a segment joining the two points of a solution. An ExtremaCurveSurface object provides a framework for: |
| GeomAPI_ExtremaSurfaceSurface | Describes functions for computing all the extrema between two surfaces. An ExtremaSurfaceSurface algorithm minimizes or maximizes the distance between a point on the first surface and a point on the second surface. Results are start and end points of perpendiculars common to the two surfaces. Solutions consist of pairs of points, and an extremum is considered to be a segment joining the two points of a solution. An ExtremaSurfaceSurface object provides a framework for: |
| GeomAPI_IntCS | This class implements methods for computing intersection points and segments between a |
| GeomAPI_Interpolate | This class is used to interpolate a BsplineCurve passing through an array of points, with a C2 Continuity if tangency is not requested at the point. If tangency is requested at the point the continuity will be C1. If Perodicity is requested the curve will be closed and the junction will be the first point given. The curve will than be only C1 Describes functions for building a constrained 3D BSpline curve. The curve is defined by a table of points through which it passes, and if required: |
| GeomAPI_IntSS | This class implements methods for computing the intersection curves between two surfaces. The result is curves from Geom. The "domain" used for a surface is the natural parametric domain unless the surface is a RectangularTrimmedSurface from Geom |
| GeomAPI_PointsToBSpline | This class is used to approximate a BsplineCurve passing through an array of points, with a given Continuity. Describes functions for building a 3D BSpline curve which approximates a set of points. A PointsToBSpline object provides a framework for: |
| GeomAPI_PointsToBSplineSurface | This class is used to approximate or interpolate a BSplineSurface passing through an Array2 of points, with a given continuity. Describes functions for building a BSpline surface which approximates or interpolates a set of points. A PointsToBSplineSurface object provides a framework for: |
| GeomAPI_ProjectPointOnCurve | This class implements methods for computing all the orthogonal projections of a 3D point onto a 3D curve |
| GeomAPI_ProjectPointOnSurf | This class implements methods for computing all the orthogonal projections of a point onto a surface |
| GeomConvert | The GeomConvert package provides some global functions as follows |
| GeomConvert_ApproxCurve | A framework to convert a 3D curve to a 3D BSpline. This is done by approximation to a BSpline curve within a given tolerance |
| GeomConvert_ApproxSurface | A framework to convert a surface to a BSpline surface. This is done by approximation to a BSpline surface within a given tolerance |
| GeomConvert_BSplineCurveKnotSplitting | An algorithm to determine points at which a BSpline curve should be split in order to obtain arcs of the same continuity. If you require curves with a minimum continuity for your computation, it is useful to know the points between which an arc has a continuity of a given order. The continuity order is given at the construction time. For a BSpline curve, the discontinuities are localized at the knot values. Between two knot values the BSpline is infinitely and continuously differentiable. At a given knot, the continuity is equal to: Degree - Mult, where Degree is the degree of the BSpline curve and Mult is the multiplicity of the knot. It is possible to compute the arcs which correspond to this splitting using the global function SplitBSplineCurve provided by the package GeomConvert. A BSplineCurveKnotSplitting object provides a framework for: |
| GeomConvert_BSplineCurveToBezierCurve | An algorithm to convert a BSpline curve into a series of adjacent Bezier curves. A BSplineCurveToBezierCurve object provides a framework for: |
| GeomConvert_BSplineSurfaceKnotSplitting | An algorithm to determine isoparametric curves along which a BSpline surface should be split in order to obtain patches of the same continuity. The continuity order is given at the construction time. It is possible to compute the surface patches corresponding to the splitting with the method of package SplitBSplineSurface. For a B-spline surface the discontinuities are localised at the knot values. Between two knots values the B-spline is infinitely continuously differentiable. For each parametric direction at a knot of range index the continuity in this direction is equal to : Degree - Mult (Index) where Degree is the degree of the basis B-spline functions and Mult the multiplicity of the knot of range Index in the given direction. If for your computation you need to have B-spline surface with a minima of continuity it can be interesting to know between which knot values, a B-spline patch, has a continuity of given order. This algorithm computes the indexes of the knots where you should split the surface, to obtain patches with a constant continuity given at the construction time. If you just want to compute the local derivatives on the surface you don't need to create the BSpline patches, you can use the functions LocalD1, LocalD2, LocalD3, LocalDN of the class BSplineSurface from package Geom |
| GeomConvert_BSplineSurfaceToBezierSurface | This algorithm converts a B-spline surface into several Bezier surfaces. It uses an algorithm of knot insertion. A BSplineSurfaceToBezierSurface object provides a framework for: |
| GeomConvert_CompBezierSurfacesToBSplineSurface | An algorithm to convert a grid of adjacent non-rational Bezier surfaces (with continuity CM) into a BSpline surface (with continuity CM). A CompBezierSurfacesToBSplineSurface object provides a framework for: |
| GeomConvert_CompCurveToBSplineCurve | Algorithm converts and concat several curve in an BSplineCurve |
| GeometryTest | This package provides commands for curves and surface |
| GeomFill | Tools and Data to filling Surface and Sweep Surfaces |
| GeomFill_AppSurf | |
| GeomFill_AppSweep | |
| GeomFill_Array1OfLocationLaw | |
| GeomFill_Array1OfSectionLaw | |
| GeomFill_BezierCurves | This class provides an algorithm for constructing a Bezier surface filled from contiguous Bezier curves which form its boundaries. The algorithm accepts two, three or four Bezier curves as the boundaries of the target surface. A range of filling styles - more or less rounded, more or less flat - is available. A BezierCurves object provides a framework for: |
| GeomFill_Boundary | Root class to define a boundary which will form part of a contour around a gap requiring filling. Any new type of constrained boundary must inherit this class. The GeomFill package provides two classes to define constrained boundaries: |
| GeomFill_BoundWithSurf | Defines a 3d curve as a boundary for a GeomFill_ConstrainedFilling algorithm. This curve is attached to an existing surface. Defines a constrained boundary for filling the computations are done with a CurveOnSurf and a normals field defined by the normalized normal to the surface along the PCurve. Contains fields to allow a reparametrization of curve and normals field |
| GeomFill_BSplineCurves | An algorithm for constructing a BSpline surface filled from contiguous BSpline curves which form its boundaries. The algorithm accepts two, three or four BSpline curves as the boundaries of the target surface. A range of filling styles - more or less rounded, more or less flat - is available. A BSplineCurves object provides a framework for: |
| GeomFill_CircularBlendFunc | Circular Blend Function to approximate by SweepApproximation from Approx |
| GeomFill_ConstantBiNormal | Defined an Trihedron Law where the BiNormal, is fixed |
| GeomFill_ConstrainedFilling | An algorithm for constructing a BSpline surface filled from a series of boundaries which serve as path constraints and optionally, as tangency constraints. The algorithm accepts three or four curves as the boundaries of the target surface. The only FillingStyle used is Coons. A ConstrainedFilling object provides a framework for: |
| GeomFill_Coons | |
| GeomFill_CoonsAlgPatch | Provides evaluation methods on an algorithmic patch (based on 4 Curves) defined by its boundaries and blending functions |
| GeomFill_CornerState | Class (should be a structure) storing the informations about continuity, normals parallelism, coons conditions and bounds tangents angle on the corner of contour to be filled |
| GeomFill_CorrectedFrenet | Defined an Corrected Frenet Trihedron Law It is like Frenet with an Torsion's minimization |
| GeomFill_CurveAndTrihedron | Define location law with an TrihedronLaw and an curve Definition Location is : transformed section coordinates in (Curve(v)), (Normal(v), BiNormal(v), Tangente(v))) systeme are the same like section shape coordinates in (O,(OX, OY, OZ)) systeme |
| GeomFill_Curved | |
| GeomFill_Darboux | Defines Darboux case of Frenet Trihedron Law |
| GeomFill_DegeneratedBound | Description of a degenerated boundary (a point). Class defining a degenerated boundary for a constrained filling with a point and no other constraint. Only used to simulate an ordinary bound, may not be usefull and desapear soon |
| GeomFill_DiscreteTrihedron | Defined Discrete Trihedron Law. The requirement for path curve is only G1. The result is C0-continuous surface that can be later approximated to C1 |
| GeomFill_DraftTrihedron | |
| GeomFill_EvolvedSection | Define an Constant Section Law |
| GeomFill_Filling | Root class for Filling; |
| GeomFill_Fixed | Defined an constant TrihedronLaw |
| GeomFill_Frenet | Defined Frenet Trihedron Law |
| GeomFill_FunctionDraft | |
| GeomFill_FunctionGuide | |
| GeomFill_Generator | Create a surface using generating lines. Inherits profiler. The surface will be a BSplineSurface passing by all the curves described in the generator. The VDegree of the resulting surface is |
| GeomFill_GuideTrihedronAC | Trihedron in the case of a sweeping along a guide curve. defined by curviline absciss |
| GeomFill_GuideTrihedronPlan | Trihedron in the case of sweeping along a guide curve defined by the orthogonal plan on the trajectory |
| GeomFill_HArray1OfLocationLaw | |
| GeomFill_HArray1OfSectionLaw | |
| GeomFill_HSequenceOfAx2 | |
| GeomFill_Line | Class for instantiation of AppBlend |
| GeomFill_LocationDraft | |
| GeomFill_LocationGuide | |
| GeomFill_LocationLaw | To define location law in Sweeping location is – defined by an Matrix M and an Vector V, and transform an point P in MP+V |
| GeomFill_LocFunction | |
| GeomFill_NSections | Define a Section Law by N Sections |
| GeomFill_Pipe | Describes functions to construct pipes. A pipe is built by sweeping a curve (the section) along another curve (the path). The Pipe class provides the following types of construction: |
| GeomFill_PlanFunc | |
| GeomFill_PolynomialConvertor | To convert circular section in polynome |
| GeomFill_Profiler | Evaluation of the common BSplineProfile of a group of curves from Geom. All the curves will have the same degree, the same knot-vector, so the same number of poles |
| GeomFill_QuasiAngularConvertor | To convert circular section in QuasiAngular Bezier form |
| GeomFill_SectionGenerator | Gives the functions needed for instantiation from AppSurf in AppBlend. Allow to evaluate a surface passing by all the curves if the Profiler |
| GeomFill_SectionLaw | To define section law in sweeping |
| GeomFill_SectionPlacement | To place section in sweep Function |
| GeomFill_SequenceNodeOfSequenceOfAx2 | |
| GeomFill_SequenceNodeOfSequenceOfTrsf | |
| GeomFill_SequenceOfAx2 | |
| GeomFill_SequenceOfTrsf | |
| GeomFill_SimpleBound | Defines a 3d curve as a boundary for a GeomFill_ConstrainedFilling algorithm. This curve is unattached to an existing surface.D Contains fields to allow a reparametrization of curve |
| GeomFill_SnglrFunc | To represent function C'(t)^C''(t) |
| GeomFill_Stretch | |
| GeomFill_Sweep | Geometrical Sweep Algorithm |
| GeomFill_SweepFunction | Function to approximate by SweepApproximation from Approx. To bulid general sweep Surface |
| GeomFill_SweepSectionGenerator | Class for instantiation of AppBlend. evaluate the sections of a sweep surface |
| GeomFill_Tensor | Used to store the "gradient of gradient" |
| GeomFill_TgtField | Root class defining the methods we need to make an algorithmic tangents field |
| GeomFill_TgtOnCoons | Defines an algorithmic tangents field on a boundary of a CoonsAlgPatch |
| GeomFill_TrihedronLaw | To define Trihedron along one Curve |
| GeomFill_TrihedronWithGuide | To define Trihedron along one Curve with a guide |
| GeomFill_UniformSection | Define an Constant Section Law |
| GeomInt | Provides intersections on between two surfaces of Geom. The result are curves from Geom |
| GeomInt_BSpGradient_BFGSOfMyBSplGradientOfTheComputeLineOfWLApprox | |
| GeomInt_BSpParFunctionOfMyBSplGradientOfTheComputeLineOfWLApprox | |
| GeomInt_BSpParLeastSquareOfMyBSplGradientOfTheComputeLineOfWLApprox | |
| GeomInt_Gradient_BFGSOfMyGradientbisOfTheComputeLineOfWLApprox | |
| GeomInt_Gradient_BFGSOfMyGradientOfTheComputeLineBezierOfWLApprox | |
| GeomInt_IntSS | |
| GeomInt_LineConstructor | Splits given Line |
| GeomInt_LineTool | |
| GeomInt_MyBSplGradientOfTheComputeLineOfWLApprox | |
| GeomInt_MyGradientbisOfTheComputeLineOfWLApprox | |
| GeomInt_MyGradientOfTheComputeLineBezierOfWLApprox | |
| GeomInt_ParameterAndOrientation | |
| GeomInt_ParFunctionOfMyGradientbisOfTheComputeLineOfWLApprox | |
| GeomInt_ParFunctionOfMyGradientOfTheComputeLineBezierOfWLApprox | |
| GeomInt_ParLeastSquareOfMyGradientbisOfTheComputeLineOfWLApprox | |
| GeomInt_ParLeastSquareOfMyGradientOfTheComputeLineBezierOfWLApprox | |
| GeomInt_ResConstraintOfMyGradientbisOfTheComputeLineOfWLApprox | |
| GeomInt_ResConstraintOfMyGradientOfTheComputeLineBezierOfWLApprox | |
| GeomInt_SequenceNodeOfSequenceOfParameterAndOrientation | |
| GeomInt_SequenceOfParameterAndOrientation | |
| GeomInt_TheComputeLineBezierOfWLApprox | |
| GeomInt_TheComputeLineOfWLApprox | |
| GeomInt_TheFunctionOfTheInt2SOfThePrmPrmSvSurfacesOfWLApprox | |
| GeomInt_TheImpPrmSvSurfacesOfWLApprox | |
| GeomInt_TheInt2SOfThePrmPrmSvSurfacesOfWLApprox | |
| GeomInt_TheMultiLineOfWLApprox | |
| GeomInt_TheMultiLineToolOfWLApprox | |
| GeomInt_ThePrmPrmSvSurfacesOfWLApprox | |
| GeomInt_TheZerImpFuncOfTheImpPrmSvSurfacesOfWLApprox | |
| GeomInt_WLApprox | |
| GeomLib | Geom Library. This package provides an implementation of functions for basic computation on geometric entity from packages Geom and Geom2d |
| GeomLib_Array1OfMat | |
| GeomLib_Check2dBSplineCurve | Checks for the end tangents : wether or not those are reversed |
| GeomLib_CheckBSplineCurve | Checks for the end tangents : wether or not those are reversed regarding the third or n-3rd control |
| GeomLib_DenominatorMultiplier | This defines an evaluator for a function of 2 variables that will be used by CancelDenominatorDerivative in one direction |
| GeomLib_Interpolate | This class is used to construct a BSpline curve by interpolation of points at given parameters The continuity of the curve is degree - 1 and the method used when boundary condition are not given is to use odd degrees and null the derivatives on both sides from degree -1 down to (degree+1) / 2 When even degree is given the returned curve is of degree - 1 so that the degree of the curve is odd |
| GeomLib_IsPlanarSurface | Find if a surface is a planar surface |
| GeomLib_LogSample | |
| GeomLib_MakeCurvefromApprox | This class is used to construct the BSpline curve from an Approximation ( ApproxAFunction from AdvApprox) |
| GeomLib_PolyFunc | Polynomial Function |
| GeomLib_Tool | Provides various methods with Geom2d and Geom curves and surfaces. The methods of this class compute the parameter(s) of a given point on a curve or a surface. The point must be located either on the curve (surface) itself or relatively to the latter at a distance less than the tolerance value. Return FALSE if the point is beyond the tolerance limit or if computation fails. Max Tolerance value is currently limited to 1.e-4 for geometrical curves and 1.e-3 for BSpline, Bezier and other parametrical curves |
| GeomliteTest | This package provides elementary commands for curves and surface |
| GeomLProp | These global functions compute the degree of continuity of a 3D curve built by concatenation of two other curves (or portions of curves) at their junction point |
| GeomLProp_CLProps | |
| GeomLProp_CurveTool | |
| GeomLProp_SLProps | |
| GeomLProp_SurfaceTool | |
| GeomPlate_Aij | A structure containing indexes of two normals and its cross product |
| GeomPlate_Array1OfHCurveOnSurface | |
| GeomPlate_Array1OfSequenceOfReal | |
| GeomPlate_BuildAveragePlane | This class computes an average inertial plane with an array of points. Computes the initial surface (average plane) in the cases when the initial surface is not given |
| GeomPlate_BuildPlateSurface | This class provides an algorithm for constructing such a plate surface that it conforms to given curve and/or point constraints. The algorithm accepts or constructs an initial surface and looks for a deformation of it satisfying the constraints and minimizing energy input. A BuildPlateSurface object provides a framework for: |
| GeomPlate_CurveConstraint | Defines curves as constraints to be used to deform a surface |
| GeomPlate_HArray1OfHCurveOnSurface | |
| GeomPlate_HArray1OfSequenceOfReal | |
| GeomPlate_HSequenceOfCurveConstraint | |
| GeomPlate_HSequenceOfPointConstraint | |
| GeomPlate_MakeApprox | Allows you to convert a GeomPlate surface into a BSpline |
| GeomPlate_PlateG0Criterion | This class contains a specific G0 criterion for GeomPlate_MakeApprox |
| GeomPlate_PlateG1Criterion | This class contains a specific G1 criterion for GeomPlate_MakeApprox |
| GeomPlate_PointConstraint | Defines points as constraints to be used to deform a surface |
| GeomPlate_SequenceNodeOfSequenceOfAij | |
| GeomPlate_SequenceNodeOfSequenceOfCurveConstraint | |
| GeomPlate_SequenceNodeOfSequenceOfPointConstraint | |
| GeomPlate_SequenceOfAij | |
| GeomPlate_SequenceOfCurveConstraint | |
| GeomPlate_SequenceOfPointConstraint | |
| GeomPlate_Surface | Describes the characteristics of plate surface objects returned by BuildPlateSurface::Surface. These can be used to verify the quality of the resulting surface before approximating it to a Geom_BSpline surface generated by MakeApprox. This proves necessary in cases where you want to use the resulting surface as the support for a shape. The algorithmically generated surface cannot fill this function as is, and as a result must be converted first |
| GeomProjLib | Projection of a curve on a surface |
| GeomToIGES_GeomCurve | This class implements the transfer of the Curve Entity from Geom To IGES. These can be : Curve . BoundedCurve |
| GeomToIGES_GeomEntity | Methods to transfer Geom entity from CASCADE to IGES |
| GeomToIGES_GeomPoint | This class implements the transfer of the Point Entity from Geom to IGES . These are : . Point |
| GeomToIGES_GeomSurface | This class implements the transfer of the Surface Entity from Geom To IGES. These can be : . BoundedSurface |
| GeomToIGES_GeomVector | This class implements the transfer of the Vector from Geom to IGES . These can be : . Vector |
| GeomTools | The GeomTools package provides utilities for Geometry |
| GeomTools_Curve2dSet | Stores a set of Curves from Geom2d |
| GeomTools_CurveSet | Stores a set of Curves from Geom |
| GeomTools_SurfaceSet | Stores a set of Surfaces from Geom |
| GeomTools_UndefinedTypeHandler | |
| GeomToStep_MakeAxis1Placement | This class implements the mapping between classes Axis1Placement from Geom and Ax1 from gp, and the class Axis1Placement from StepGeom which describes an Axis1Placement from Prostep |
| GeomToStep_MakeAxis2Placement2d | This class implements the mapping between classes Axis2Placement from Geom and Ax2, Ax22d from gp, and the class Axis2Placement2d from StepGeom which describes an axis2_placement_2d from Prostep |
| GeomToStep_MakeAxis2Placement3d | This class implements the mapping between classes Axis2Placement from Geom and Ax2, Ax3 from gp, and the class Axis2Placement3d from StepGeom which describes an axis2_placement_3d from Prostep |
| GeomToStep_MakeBoundedCurve | This class implements the mapping between classes BoundedCurve from Geom, Geom2d and the class BoundedCurve from StepGeom which describes a BoundedCurve from prostep. As BoundedCurve is an abstract BoundedCurve this class is an access to the sub-class required |
| GeomToStep_MakeBoundedSurface | This class implements the mapping between classes BoundedSurface from Geom and the class BoundedSurface from StepGeom which describes a BoundedSurface from prostep. As BoundedSurface is an abstract BoundedSurface this class is an access to the sub-class required |
| GeomToStep_MakeBSplineCurveWithKnots | This class implements the mapping between classes BSplineCurve from Geom, Geom2d and the class BSplineCurveWithKnots from StepGeom which describes a bspline_curve_with_knots from Prostep |
| GeomToStep_MakeBSplineCurveWithKnotsAndRationalBSplineCurve | This class implements the mapping between classes BSplineCurve from Geom, Geom2d and the class BSplineCurveWithKnotsAndRationalBSplineCurve from StepGeom which describes a rational_bspline_curve_with_knots from Prostep |
| GeomToStep_MakeBSplineSurfaceWithKnots | This class implements the mapping between class BSplineSurface from Geom and the class BSplineSurfaceWithKnots from StepGeom which describes a bspline_Surface_with_knots from Prostep |
| GeomToStep_MakeBSplineSurfaceWithKnotsAndRationalBSplineSurface | This class implements the mapping between class BSplineSurface from Geom and the class BSplineSurfaceWithKnotsAndRationalBSplineSurface from StepGeom which describes a rational_bspline_Surface_with_knots from Prostep |
| GeomToStep_MakeCartesianPoint | This class implements the mapping between classes CartesianPoint from Geom and Pnt from gp, and the class CartesianPoint from StepGeom which describes a point from Prostep |
| GeomToStep_MakeCircle | This class implements the mapping between classes Circle from Geom, and Circ from gp, and the class Circle from StepGeom which describes a circle from Prostep |
| GeomToStep_MakeConic | This class implements the mapping between classes Conic from Geom and the class Conic from StepGeom which describes a Conic from prostep. As Conic is an abstract Conic this class is an access to the sub-class required |
| GeomToStep_MakeConicalSurface | This class implements the mapping between class ConicalSurface from Geom and the class ConicalSurface from StepGeom which describes a conical_surface from Prostep |
| GeomToStep_MakeCurve | This class implements the mapping between classes Curve from Geom and the class Curve from StepGeom which describes a Curve from prostep. As Curve is an abstract curve this class an access to the sub-class required |
| GeomToStep_MakeCylindricalSurface | This class implements the mapping between class CylindricalSurface from Geom and the class CylindricalSurface from StepGeom which describes a cylindrical_surface from Prostep |
| GeomToStep_MakeDirection | This class implements the mapping between classes Direction from Geom, Geom2d and Dir, Dir2d from gp, and the class Direction from StepGeom which describes a direction from Prostep |
| GeomToStep_MakeElementarySurface | This class implements the mapping between classes ElementarySurface from Geom and the class ElementarySurface from StepGeom which describes a ElementarySurface from prostep. As ElementarySurface is an abstract Surface this class is an access to the sub-class required |
| GeomToStep_MakeEllipse | This class implements the mapping between classes Ellipse from Geom, and Circ from gp, and the class Ellipse from StepGeom which describes a Ellipse from Prostep |
| GeomToStep_MakeHyperbola | This class implements the mapping between the class Hyperbola from Geom and the class Hyperbola from StepGeom which describes a Hyperbola from ProSTEP |
| GeomToStep_MakeLine | This class implements the mapping between classes Line from Geom and Lin from gp, and the class Line from StepGeom which describes a line from Prostep |
| GeomToStep_MakeParabola | This class implements the mapping between the class Parabola from Geom and the class Parabola from StepGeom which describes a Parabola from ProSTEP |
| GeomToStep_MakePlane | This class implements the mapping between classes Plane from Geom and Pln from gp, and the class Plane from StepGeom which describes a plane from Prostep |
| GeomToStep_MakePolyline | This class implements the mapping between an Array1 of points from gp and a Polyline from StepGeom |
| GeomToStep_MakeRectangularTrimmedSurface | This class implements the mapping between class RectangularTrimmedSurface from Geom and the class RectangularTrimmedSurface from StepGeom which describes a rectangular_trimmed_surface from ISO-IS 10303-42 |
| GeomToStep_MakeSphericalSurface | This class implements the mapping between class SphericalSurface from Geom and the class SphericalSurface from StepGeom which describes a spherical_surface from Prostep |
| GeomToStep_MakeSurface | This class implements the mapping between classes Surface from Geom and the class Surface from StepGeom which describes a Surface from prostep. As Surface is an abstract Surface this class is an access to the sub-class required |
| GeomToStep_MakeSurfaceOfLinearExtrusion | This class implements the mapping between class SurfaceOfLinearExtrusion from Geom and the class SurfaceOfLinearExtrusion from StepGeom which describes a surface_of_linear_extrusion from Prostep |
| GeomToStep_MakeSurfaceOfRevolution | This class implements the mapping between class SurfaceOfRevolution from Geom and the class SurfaceOfRevolution from StepGeom which describes a surface_of_revolution from Prostep |
| GeomToStep_MakeSweptSurface | This class implements the mapping between classes SweptSurface from Geom and the class SweptSurface from StepGeom which describes a SweptSurface from prostep. As SweptSurface is an abstract SweptSurface this class is an access to the sub-class required |
| GeomToStep_MakeToroidalSurface | This class implements the mapping between class ToroidalSurface from Geom and the class ToroidalSurface from StepGeom which describes a toroidal_surface from Prostep |
| GeomToStep_MakeVector | This class implements the mapping between classes Vector from Geom, Geom2d and Vec, Vec2d from gp, and the class Vector from StepGeom which describes a Vector from Prostep |
| GeomToStep_Root | This class implements the common services for all classes of GeomToStep which report error |
| gp | The geometric processor package, called gp, provides an implementation of entities used : . for algebraic calculation such as "XYZ" coordinates, "Mat" matrix . for basis analytic geometry such as Transformations, point, vector, line, plane, axis placement, conics, and elementary surfaces. These entities are defined in 2d and 3d space. All the classes of this package are non-persistent |
| gp_Ax1 | Describes an axis in 3D space. An axis is defined by: |
| gp_Ax2 | Describes a right-handed coordinate system in 3D space. A coordinate system is defined by: |
| gp_Ax22d | Describes a coordinate system in a plane (2D space). A coordinate system is defined by: |
| gp_Ax2d | Describes an axis in the plane (2D space). An axis is defined by: |
| gp_Ax3 | Describes a coordinate system in 3D space. Unlike a gp_Ax2 coordinate system, a gp_Ax3 can be right-handed ("direct sense") or left-handed ("indirect sense"). A coordinate system is defined by: |
| gp_Circ | Describes a circle in 3D space. A circle is defined by its radius and positioned in space with a coordinate system (a gp_Ax2 object) as follows: |
| gp_Circ2d | Describes a circle in the plane (2D space). A circle is defined by its radius and positioned in the plane with a coordinate system (a gp_Ax22d object) as follows: |
| gp_Cone | Defines an infinite conical surface. A cone is defined by its half-angle at the apex and positioned in space with a coordinate system (a gp_Ax3 object) and a "reference radius" where: |
| gp_Cylinder | Describes an infinite cylindrical surface. A cylinder is defined by its radius and positioned in space with a coordinate system (a gp_Ax3 object), the "main Axis" of which is the axis of the cylinder. This coordinate system is the "local coordinate system" of the cylinder. Note: when a gp_Cylinder cylinder is converted into a Geom_CylindricalSurface cylinder, some implicit properties of its local coordinate system are used explicitly: |
| gp_Dir | Describes a unit vector in 3D space. This unit vector is also called "Direction". See Also gce_MakeDir which provides functions for more complex unit vector constructions Geom_Direction which provides additional functions for constructing unit vectors and works, in particular, with the parametric equations of unit vectors |
| gp_Dir2d | Describes a unit vector in the plane (2D space). This unit vector is also called "Direction". See Also gce_MakeDir2d which provides functions for more complex unit vector constructions Geom2d_Direction which provides additional functions for constructing unit vectors and works, in particular, with the parametric equations of unit vectors |
| gp_Elips | Describes an ellipse in 3D space. An ellipse is defined by its major and minor radii and positioned in space with a coordinate system (a gp_Ax2 object) as follows: |
| gp_Elips2d | Describes an ellipse in the plane (2D space). An ellipse is defined by its major and minor radii and positioned in the plane with a coordinate system (a gp_Ax22d object) as follows: |
| gp_GTrsf | Defines a non-persistent transformation in 3D space. This transformation is a general transformation. It can be a Trsf from gp, an affinity, or you can define your own transformation giving the matrix of transformation |
| gp_GTrsf2d | Defines a non persistent transformation in 2D space. This transformation is a general transformation. It can be a Trsf2d from package gp, an affinity, or you can define your own transformation giving the corresponding matrix of transformation |
| gp_Hypr | Describes a branch of a hyperbola in 3D space. A hyperbola is defined by its major and minor radii and positioned in space with a coordinate system (a gp_Ax2 object) of which: |
| gp_Hypr2d | Describes a branch of a hyperbola in the plane (2D space). A hyperbola is defined by its major and minor radii, and positioned in the plane with a coordinate system (a gp_Ax22d object) of which: |
| gp_Lin | Describes a line in 3D space. A line is positioned in space with an axis (a gp_Ax1 object) which gives it an origin and a unit vector. A line and an axis are similar objects, thus, we can convert one into the other. A line provides direct access to the majority of the edit and query functions available on its positioning axis. In addition, however, a line has specific functions for computing distances and positions. See Also gce_MakeLin which provides functions for more complex line constructions Geom_Line which provides additional functions for constructing lines and works, in particular, with the parametric equations of lines |
| gp_Lin2d | Describes a line in 2D space. A line is positioned in the plane with an axis (a gp_Ax2d object) which gives the line its origin and unit vector. A line and an axis are similar objects, thus, we can convert one into the other. A line provides direct access to the majority of the edit and query functions available on its positioning axis. In addition, however, a line has specific functions for computing distances and positions. See Also GccAna and Geom2dGcc packages which provide functions for constructing lines defined by geometric constraints gce_MakeLin2d which provides functions for more complex line constructions Geom2d_Line which provides additional functions for constructing lines and works, in particular, with the parametric equations of lines |
| gp_Mat | Describes a three column, three row matrix. This sort of object is used in various vectorial or matrix computations |
| gp_Mat2d | Describes a two column, two row matrix. This sort of object is used in various vectorial or matrix computations |
| gp_Parab | Describes a parabola in 3D space. A parabola is defined by its focal length (that is, the distance between its focus and apex) and positioned in space with a coordinate system (a gp_Ax2 object) where: |
| gp_Parab2d | Describes a parabola in the plane (2D space). A parabola is defined by its focal length (that is, the distance between its focus and apex) and positioned in the plane with a coordinate system (a gp_Ax22d object) where: |
| gp_Pln | Describes a plane. A plane is positioned in space with a coordinate system (a gp_Ax3 object), such that the plane is defined by the origin, "X Direction" and "Y Direction" of this coordinate system, which is the "local coordinate system" of the plane. The "main Direction" of the coordinate system is a vector normal to the plane. It gives the plane an implicit orientation such that the plane is said to be "direct", if the coordinate system is right-handed, or "indirect" in the other case. Note: when a gp_Pln plane is converted into a Geom_Plane plane, some implicit properties of its local coordinate system are used explicitly: |
| gp_Pnt | Defines a 3D cartesian point |
| gp_Pnt2d | Defines a non-persistent 2D cartesian point |
| gp_Quaternion | Represents operation of rotation in 3d space as queternion and implements operations with rotations basing on quaternion mathematics |
| gp_QuaternionNLerp | |
| gp_QuaternionSLerp | |
| gp_Sphere | Describes a sphere. A sphere is defined by its radius and positioned in space with a coordinate system (a gp_Ax3 object). The origin of the coordinate system is the center of the sphere. This coordinate system is the "local coordinate system" of the sphere. Note: when a gp_Sphere sphere is converted into a Geom_SphericalSurface sphere, some implicit properties of its local coordinate system are used explicitly: |
| gp_Torus | Describes a torus. A torus is defined by its major and minor radii and positioned in space with a coordinate system (a gp_Ax3 object) as follows: |
| gp_Trsf | Defines a non-persistent transformation in 3D space. The following transformations are implemented : . Translation, Rotation, Scale . Symmetry with respect to a point, a line, a plane. Complex transformations can be obtained by combining the previous elementary transformations using the method Multiply. The transformations can be represented as follow : |
| gp_Trsf2d | Defines a non-persistent transformation in 2D space. The following transformations are implemented : . Translation, Rotation, Scale . Symmetry with respect to a point and a line. Complex transformations can be obtained by combining the previous elementary transformations using the method Multiply. The transformations can be represented as follow : |
| gp_Vec | Defines a non-persistent vector in 3D space |
| gp_Vec2d | Defines a non-persistent vector in 2D space |
| gp_XY | This class describes a cartesian coordinate entity in 2D space {X,Y}. This class is non persistent. This entity used for algebraic calculation. An XY can be transformed with a Trsf2d or a GTrsf2d from package gp. It is used in vectorial computations or for holding this type of information in data structures |
| gp_XYZ | This class describes a cartesian coordinate entity in 3D space {X,Y,Z}. This entity is used for algebraic calculation. This entity can be transformed with a "Trsf" or a "GTrsf" from package "gp". It is used in vectorial computations or for holding this type of information in data structures |
| GProp | This package defines algorithmes to compute the global properties of a set of points, a curve, a surface, a solid (non infinite region of space delimited with geometric entities), a compound geometric system (heterogeneous composition of the previous entities) |
| GProp_CelGProps | Computes the global properties of bounded curves in 3D space. It can be an elementary curve from package gp such as Lin, Circ, Elips, Parab |
| GProp_GProps | Implements a general mechanism to compute the global properties of a "compound geometric system" in 3d space by composition of the global properties of "elementary geometric entities" such as (curve, surface, solid, set of points). It is possible to compose the properties of several "compound geometric systems" too |
| GProp_PEquation | A framework to analyze a collection - or cloud |
| GProp_PGProps | A framework for computing the global properties of a set of points. A point mass is attached to each point. The global mass of the system is the sum of each individual mass. By default, the point mass is equal to 1 and the mass of a system composed of N points is equal to N. Warning A framework of this sort provides functions to handle sets of points easily. But, like any GProp_GProps object, by using the Add function, it can theoretically bring together the computed global properties and those of a system more complex than a set of points . The mass of each point and the density of each component of the composed system must be coherent. Note that this coherence cannot be checked. Nonetheless, you are advised to restrict your use of a GProp_PGProps object to a set of points and to create a GProp_GProps object in order to bring together global properties of different systems |
| GProp_PrincipalProps | A framework to present the principal properties of inertia of a system of which global properties are computed by a GProp_GProps object. There is always a set of axes for which the products of inertia of a geometric system are equal to 0; i.e. the matrix of inertia of the system is diagonal. These axes are the principal axes of inertia. Their origin is coincident with the center of mass of the system. The associated moments are called the principal moments of inertia. This sort of presentation object is created, filled and returned by the function PrincipalProperties for any GProp_GProps object, and can be queried to access the result. Note: The system whose principal properties of inertia are returned by this framework is referred to as the current system. The current system, however, is retained neither by this presentation framework nor by the GProp_GProps object which activates it |
| GProp_SelGProps | Computes the global properties of a bounded elementary surface in 3d (surface of the gp package) |
| GProp_VelGProps | Computes the global properties and the volume of a geometric solid (3D closed region of space) The solid can be elementary(definition in the gp package) |
| Graphic3d_Array1OfVector | |
| Graphic3d_Array1OfVertex | |
| Graphic3d_Array2OfVertex | |
| Graphic3d_ArrayOfPoints | Contains points array definition |
| Graphic3d_ArrayOfPolygons | Contains polygons array definition |
| Graphic3d_ArrayOfPolylines | Contains polylines array definition |
| Graphic3d_ArrayOfPrimitives | This class furnish services to defined and fill an array of primitives compatible with the use of the OPENGl glDrawArrays() or glDrawElements() functions. NOTE that the main goal of this kind of primitive is to avoid multiple copies of datas between each layer of the software. So the array datas exist only one time and the use of SetXxxxxx() methods enable to change dynamically the aspect of this primitive |
| Graphic3d_ArrayOfQuadrangles | Contains quatrangles array definition |
| Graphic3d_ArrayOfQuadrangleStrips | Contains quadrangles strip array definition |
| Graphic3d_ArrayOfSegments | Contains segments array definition |
| Graphic3d_ArrayOfTriangleFans | Contains triangles fan array definition |
| Graphic3d_ArrayOfTriangles | Contains triangles array definition |
| Graphic3d_ArrayOfTriangleStrips | Contains triangles strip array definition |
| Graphic3d_AspectFillArea3d | This class permits the creation and updating of a graphic attribute context for opaque 3d primitives (polygons, triangles, quadrilaterals) Keywords: Face, FillArea, Triangle, Quadrangle, Polygon, TriangleMesh, QuadrangleMesh, Edge, Border, Interior, Color, Type, Width, Style, Hatch, Material, BackFaceRemoval, DistinguishMode |
| Graphic3d_AspectLine3d | Creates and updates a group of attributes for 3d line primitives. This group contains the colour, the type of line, and its thickness |
| Graphic3d_AspectMarker3d | Creates and updates an attribute group for marker type primitives. This group contains the type of marker, its colour, and its scale factor |
| Graphic3d_AspectText3d | Creates and updates a group of attributes for text primitives. This group contains the colour, font, expansion factor (height/width ratio), and inter-character space |
| Graphic3d_Attribute | Vertex attribute definition |
| Graphic3d_AxisAspect | Class that stores style for one graduated trihedron axis such as colors, lengths and customization flags. It is used in Graphic3d_GraduatedTrihedron |
| Graphic3d_BoundBuffer | Bounds buffer |
| Graphic3d_Buffer | Buffer of vertex attributes |
| Graphic3d_Camera | Camera class provides object-oriented approach to setting up projection and orientation properties of 3D view |
| Graphic3d_CAspectFillArea | |
| Graphic3d_CAspectLine | |
| Graphic3d_CAspectMarker | |
| Graphic3d_CAspectText | |
| Graphic3d_CBitFields16 | |
| Graphic3d_CBitFields20 | |
| Graphic3d_CBitFields4 | |
| Graphic3d_CBitFields8 | |
| Graphic3d_CLight | Light definition |
| Graphic3d_ClipPlane | Container for properties describing graphic driver clipping planes. It is up to application to create instances of this class and specify its properties. The instances are passed into graphic driver or other facilities that implement clipping features (e.g. selection). Depending on usage context the class can be used to specify: |
| Graphic3d_CStructure | Low-level graphic structure interface |
| Graphic3d_CTexture | |
| Graphic3d_CView | |
| Graphic3d_DataStructureManager | This class allows the definition of a manager to which the graphic objects are associated. It allows them to be globally manipulated. It defines the global attributes |
| Graphic3d_GraduatedTrihedron | Defines the class of a graduated trihedron. It contains main style parameters for implementation of graduated trihedron |
| Graphic3d_GraphicDriver | This class allows the definition of a graphic driver for 3d interface (currently only OpenGl driver is used) |
| Graphic3d_Group | This class allows the definition of groups of primitives inside of graphic objects (presentations). A group contains the primitives and attributes for which the range is limited to this group. The primitives of a group can be globally suppressed |
| Graphic3d_HSequenceOfStructure | |
| Graphic3d_IndexBuffer | Index buffer |
| Graphic3d_ListIteratorOfListOfShortReal | |
| Graphic3d_ListNodeOfListOfShortReal | |
| Graphic3d_ListOfShortReal | |
| Graphic3d_MarkerImage | This class is used to store bitmaps and images for markers rendering. It can convert bitmap texture stored in TColStd_HArray1OfByte to Image_PixMap and vice versa |
| Graphic3d_MaterialAspect | This class allows the definition of the type of a surface. Aspect attributes of a 3d face. Keywords: Material, FillArea, Shininess, Ambient, Color, Diffuse, Specular, Transparency, Emissive, ReflectionMode, BackFace, FrontFace, Reflection, Absorbtion |
| Graphic3d_RenderingParams | Helper class to store rendering parameters |
| Graphic3d_SequenceNodeOfSequenceOfStructure | |
| Graphic3d_SequenceOfStructure | |
| Graphic3d_ShaderObject | This class is responsible for managing shader objects |
| Graphic3d_ShaderProgram | This class is responsible for managing shader programs |
| Graphic3d_ShaderVariable | Describes custom uniform shader variable |
| Graphic3d_Structure | This class allows the definition a graphic object. This graphic structure can be displayed, erased, or highlighted. This graphic structure can be connected with another graphic structure. Keywords: Structure, StructureManager, Display, Erase, Highlight, UnHighlight, Visible, Priority, Selectable, Visible, Visual, Connection, Ancestors, Descendants, Transformation |
| Graphic3d_StructureManager | This class allows the definition of a manager to which the graphic objects are associated. It allows them to be globally manipulated. It defines the global attributes. Keywords: Structure, Structure Manager, Update Mode, Destroy, Highlight, Visible |
| Graphic3d_Texture1D | This is an abstract class for managing 1D textures |
| Graphic3d_Texture1Dmanual | This class provides the implementation of a manual 1D texture. you MUST provides texture coordinates on your facets if you want to see your texture |
| Graphic3d_Texture1Dsegment | This class provides the implementation of a 1D texture applyable along a segment. You might use the SetSegment() method to set the way the texture is "streched" on facets |
| Graphic3d_Texture2D | This abstract class for managing 2D textures |
| Graphic3d_Texture2Dmanual | This class defined a manual texture 2D facets MUST define texture coordinate if you want to see somethings on |
| Graphic3d_Texture2Dplane | This class allows the management of a 2D texture defined from a plane equation Use the SetXXX() methods for positioning the texture as you want |
| Graphic3d_TextureEnv | This class provides environment texture usable only in Visual3d_ContextView |
| Graphic3d_TextureMap | This is an abstract class for managing texture applyable on polygons |
| Graphic3d_TextureParams | This class describes texture parameters |
| Graphic3d_TextureRoot | This is the texture root class enable the dialog with the GraphicDriver allows the loading of texture |
| Graphic3d_UniformValue | Describes specific value of custom uniform variable |
| Graphic3d_UniformValueTypeID | Generates unique type identifier for variable value |
| Graphic3d_UniformValueTypeID< Graphic3d_Vec2 > | |
| Graphic3d_UniformValueTypeID< Graphic3d_Vec2i > | |
| Graphic3d_UniformValueTypeID< Graphic3d_Vec3 > | |
| Graphic3d_UniformValueTypeID< Graphic3d_Vec3i > | |
| Graphic3d_UniformValueTypeID< Graphic3d_Vec4 > | |
| Graphic3d_UniformValueTypeID< Graphic3d_Vec4i > | |
| Graphic3d_UniformValueTypeID< Standard_Integer > | |
| Graphic3d_UniformValueTypeID< Standard_ShortReal > | |
| Graphic3d_ValueInterface | Interface for generic variable value |
| Graphic3d_Vector | This class allows the creation and update of a 3D vector |
| Graphic3d_Vertex | This class represents a graphical 3D point |
| Graphic3d_ViewAffinity | Structure display state |
| Graphic3d_ZLayerSettings | Structure defines list of ZLayer properties |
| GUID | |
| Hatch_Hatcher | The Hatcher is an algorithm to compute cross hatchings in a 2d plane. It is mainly dedicated to display purpose |
| Hatch_Line | Stores a Line in the Hatcher. Represented by : |
| Hatch_Parameter | Stores an intersection on a line represented by : |
| Hatch_SequenceNodeOfSequenceOfLine | |
| Hatch_SequenceNodeOfSequenceOfParameter | |
| Hatch_SequenceOfLine | |
| Hatch_SequenceOfParameter | |
| HatchGen_Domain | |
| HatchGen_Domains | |
| HatchGen_IntersectionPoint | |
| HatchGen_PointOnElement | |
| HatchGen_PointOnHatching | |
| HatchGen_PointsOnElement | |
| HatchGen_PointsOnHatching | |
| HatchGen_SequenceNodeOfDomains | |
| HatchGen_SequenceNodeOfPointsOnElement | |
| HatchGen_SequenceNodeOfPointsOnHatching | |
| HeaderSection | |
| HeaderSection_FileDescription | |
| HeaderSection_FileName | |
| HeaderSection_FileSchema | |
| HeaderSection_HeaderRecognizer | Recognizes STEP Standard Header Entities (FileName, FileDescription, FileSchema) |
| HeaderSection_Protocol | Protocol for HeaderSection Entities It requires HeaderSection as a Resource |
| Hermit | This is used to reparameterize Rational BSpline Curves so that we can concatenate them later to build C1 Curves It builds and 1D-reparameterizing function starting from an Hermite interpolation and adding knots and modifying poles of the 1D BSpline obtained that way. The goal is to build a(u) so that if we consider a BSpline curve N(u) f(u) = --— D(u) |
| HLRAlgo | In order to have the precision required in industrial design, drawings need to offer the possibility of removing lines, which are hidden in a given projection. To do this, the Hidden Line Removal component provides two algorithms: HLRBRep_Algo and HLRBRep_PolyAlgo. These algorithms remove or indicate lines hidden by surfaces. For a given projection, they calculate a set of lines characteristic of the object being represented. They are also used in conjunction with extraction utilities, which reconstruct a new, simplified shape from a selection of calculation results. This new shape is made up of edges, which represent the lines of the visualized shape in a plane. This plane is the projection plane. HLRBRep_Algo takes into account the shape itself. HLRBRep_PolyAlgo works with a polyhedral simplification of the shape. When you use HLRBRep_Algo, you obtain an exact result, whereas, when you use HLRBRep_PolyAlgo, you reduce computation time but obtain polygonal segments |
| HLRAlgo_Array1OfPHDat | |
| HLRAlgo_Array1OfPINod | |
| HLRAlgo_Array1OfPISeg | |
| HLRAlgo_Array1OfTData | |
| HLRAlgo_BiPoint | |
| HLRAlgo_Coincidence | The Coincidence class is used in an Inteference to store informations on the "hiding" edge |
| HLRAlgo_EdgeIterator | |
| HLRAlgo_EdgesBlock | An EdgesBlock is a set of Edges. It is used by the DataStructure to structure the Edges |
| HLRAlgo_EdgeStatus | This class describes the Hidden Line status of an Edge. It contains : |
| HLRAlgo_HArray1OfPHDat | |
| HLRAlgo_HArray1OfPINod | |
| HLRAlgo_HArray1OfPISeg | |
| HLRAlgo_HArray1OfTData | |
| HLRAlgo_Interference | |
| HLRAlgo_InterferenceList | |
| HLRAlgo_Intersection | Describes an intersection on an edge to hide. Contains a parameter and a state (ON = on the face, OUT = above the face, IN = under the Face) |
| HLRAlgo_ListIteratorOfInterferenceList | |
| HLRAlgo_ListIteratorOfListOfBPoint | |
| HLRAlgo_ListNodeOfInterferenceList | |
| HLRAlgo_ListNodeOfListOfBPoint | |
| HLRAlgo_ListOfBPoint | |
| HLRAlgo_PolyAlgo | To remove Hidden lines on Triangulations |
| HLRAlgo_PolyData | Data structure of a set of Triangles |
| HLRAlgo_PolyHidingData | Data structure of a set of Hiding Triangles |
| HLRAlgo_PolyInternalData | To Update OutLines |
| HLRAlgo_PolyInternalNode | To Update OutLines |
| HLRAlgo_PolyInternalSegment | To Update OutLines |
| HLRAlgo_PolyShellData | All the PolyData of a Shell |
| HLRAlgo_Projector | Implements a projector object. To transform and project Points and Planes. This object is designed to be used in the removal of hidden lines and is returned by the Prs3d_Projector::Projector function. You define the projection of the selected shape by calling one of the following functions: |
| HLRAlgo_TriangleData | Data structure of a triangle |
| HLRAlgo_WiresBlock | A WiresBlock is a set of Blocks. It is used by the DataStructure to structure the Edges |
| HLRAppli_ReflectLines | This class builds reflect lines on a shape according to the axes of view defined by user. Reflect lines are represented by edges in 3d |
| HLRBRep | Hidden Lines Removal algorithms on the BRep DataStructure |
| HLRBRep_Algo | Inherited from InternalAlgo to provide methods with Shape from TopoDS. A framework to compute a shape as seen in a projection plane. This is done by calculating the visible and the hidden parts of the shape. HLRBRep_Algo works with three types of entity: |
| HLRBRep_AreaLimit | The private nested class AreaLimit represents a – vertex on the Edge with the state on the left and – the right |
| HLRBRep_Array1OfEData | |
| HLRBRep_Array1OfFData | |
| HLRBRep_BCurveTool | |
| HLRBRep_BiPnt2D | Contains the colors of a shape |
| HLRBRep_BiPoint | Contains the colors of a shape |
| HLRBRep_BSurfaceTool | |
| HLRBRep_CInter | |
| HLRBRep_CLProps | |
| HLRBRep_CLPropsATool | |
| HLRBRep_Curve | Defines a 2d curve by projection of a 3D curve on a plane with an optional perspective transformation |
| HLRBRep_CurveTool | |
| HLRBRep_Data | |
| HLRBRep_EdgeBuilder | |
| HLRBRep_EdgeData | |
| HLRBRep_EdgeFaceTool | The EdgeFaceTool computes the UV coordinates at a given parameter on a Curve and a Surface. It also compute the signed curvature value in a direction at a given u,v point on a surface |
| HLRBRep_EdgeIList | |
| HLRBRep_EdgeInterferenceTool | Implements the methods required to instantiates the EdgeInterferenceList from HLRAlgo |
| HLRBRep_ExactIntersectionPointOfTheIntPCurvePCurveOfCInter | |
| HLRBRep_FaceData | |
| HLRBRep_FaceIterator | |
| HLRBRep_Hider | |
| HLRBRep_HLRToShape | A framework for filtering the computation results of an HLRBRep_Algo algorithm by extraction. From the results calculated by the algorithm on a shape, a filter returns the type of edge you want to identify. You can choose any of the following types of output: |
| HLRBRep_IntConicCurveOfCInter | |
| HLRBRep_InterCSurf | |
| HLRBRep_InternalAlgo | |
| HLRBRep_Intersector | The Intersector computes 2D intersections of the projections of 3D curves |
| HLRBRep_LineTool | The LineTool class provides class methods to access the methodes of the Line |
| HLRBRep_ListIteratorOfListOfBPnt2D | |
| HLRBRep_ListIteratorOfListOfBPoint | |
| HLRBRep_ListNodeOfListOfBPnt2D | |
| HLRBRep_ListNodeOfListOfBPoint | |
| HLRBRep_ListOfBPnt2D | |
| HLRBRep_ListOfBPoint | |
| HLRBRep_MyImpParToolOfTheIntersectorOfTheIntConicCurveOfCInter | |
| HLRBRep_PCLocFOfTheLocateExtPCOfTheProjPCurOfCInter | |
| HLRBRep_PolyAlgo | To remove Hidden lines on Shapes with Triangulations. A framework to compute the shape as seen in a projection plane. This is done by calculating the visible and the hidden parts of the shape. HLRBRep_PolyAlgo works with three types of entity: |
| HLRBRep_PolyHLRToShape | A framework for filtering the computation results of an HLRBRep_Algo algorithm by extraction. From the results calculated by the algorithm on a shape, a filter returns the type of edge you want to identify. You can choose any of the following types of output: |
| HLRBRep_SeqOfShapeBounds | |
| HLRBRep_SeqPCOfPCLocFOfTheLocateExtPCOfTheProjPCurOfCInter | |
| HLRBRep_SequenceNodeOfSeqOfShapeBounds | |
| HLRBRep_SequenceNodeOfSeqPCOfPCLocFOfTheLocateExtPCOfTheProjPCurOfCInter | |
| HLRBRep_ShapeBounds | Contains a Shape and the bounds of its vertices, edges and faces in the DataStructure |
| HLRBRep_ShapeToHLR | Compute the OutLinedShape of a Shape with an OutLiner, a Projector and create the Data Structure of a Shape |
| HLRBRep_SLProps | |
| HLRBRep_SLPropsATool | |
| HLRBRep_Surface | |
| HLRBRep_SurfaceTool | |
| HLRBRep_TheCSFunctionOfInterCSurf | |
| HLRBRep_TheCurveLocatorOfTheProjPCurOfCInter | |
| HLRBRep_TheDistBetweenPCurvesOfTheIntPCurvePCurveOfCInter | |
| HLRBRep_TheExactInterCSurf | |
| HLRBRep_TheIntConicCurveOfCInter | |
| HLRBRep_TheInterferenceOfInterCSurf | |
| HLRBRep_TheIntersectorOfTheIntConicCurveOfCInter | |
| HLRBRep_TheIntPCurvePCurveOfCInter | |
| HLRBRep_TheLocateExtPCOfTheProjPCurOfCInter | |
| HLRBRep_ThePolygon2dOfTheIntPCurvePCurveOfCInter | |
| HLRBRep_ThePolygonOfInterCSurf | |
| HLRBRep_ThePolygonToolOfInterCSurf | |
| HLRBRep_ThePolyhedronOfInterCSurf | |
| HLRBRep_ThePolyhedronToolOfInterCSurf | |
| HLRBRep_TheProjPCurOfCInter | |
| HLRBRep_TheQuadCurvExactInterCSurf | |
| HLRBRep_TheQuadCurvFuncOfTheQuadCurvExactInterCSurf | |
| HLRBRep_VertexList | |
| HLRTest | This package is a test of the Hidden Lines algorithms instantiated on the BRep Data Structure and using the Draw package to display the results |
| HLRTest_DrawableEdgeTool | Used to display the results |
| HLRTest_DrawablePolyEdgeTool | Used to display the results |
| HLRTest_OutLiner | |
| HLRTest_Projector | Draw Variable Projector to test |
| HLRTest_ShapeData | Contains the colors of a shape |
| HLRTopoBRep_Data | Stores the results of the OutLine and IsoLine processes |
| HLRTopoBRep_DataMapIteratorOfDataMapOfShapeFaceData | |
| HLRTopoBRep_DataMapIteratorOfMapOfShapeListOfVData | |
| HLRTopoBRep_DataMapNodeOfDataMapOfShapeFaceData | |
| HLRTopoBRep_DataMapNodeOfMapOfShapeListOfVData | |
| HLRTopoBRep_DataMapOfShapeFaceData | |
| HLRTopoBRep_DSFiller | Provides methods to fill a HLRTopoBRep_Data |
| HLRTopoBRep_FaceData | Contains the 3 ListOfShape of a Face ( Internal OutLines, OutLines on restriction and IsoLines ) |
| HLRTopoBRep_FaceIsoLiner | |
| HLRTopoBRep_ListIteratorOfListOfVData | |
| HLRTopoBRep_ListNodeOfListOfVData | |
| HLRTopoBRep_ListOfVData | |
| HLRTopoBRep_MapOfShapeListOfVData | |
| HLRTopoBRep_OutLiner | |
| HLRTopoBRep_VData | |
| icilist | |
| IFGraph_AllConnected | This class gives content of the CONNECTED COMPONANT(S) which include specific Entity(ies) |
| IFGraph_AllShared | This class determines all Entities shared by some specific ones, at any level (those which will be lead in a Transfer for instance) |
| IFGraph_Articulations | This class gives entities which are Articulation points in a whole Model or in a sub-part An Articulation Point divides the graph in two (or more) disconnected sub-graphs Identifying Articulation Points allows improving efficiency of spliting a set of Entities into sub-sets |
| IFGraph_Compare | This class evaluates effect of two compared sub-parts : cumulation (union), common part (intersection-overlapping) part specific to first sub-part or to the second one Results are kept in a Graph, several question can be set Basic Iteration gives Cumulation (union) |
| IFGraph_ConnectedComponants | Determines Connected Componants in a Graph. They define disjoined sets of Entities |
| IFGraph_Cumulate | This class evaluates effect of cumulated sub-parts : overlapping, forgotten entities Results are kept in a Graph, several question can be set Basic Iteration gives entities which are part of Cumulation |
| IFGraph_Cycles | Determines strong componants in a graph which are Cycles |
| IFGraph_ExternalSources | This class gives entities which are Source of entities of a sub-part, but are not contained by this sub-part |
| IFGraph_SCRoots | Determines strong componants in a graph which are Roots |
| IFGraph_StrongComponants | Determines strong componants of a graph, that is isolated entities (single componants) or loops |
| IFGraph_SubPartsIterator | Defines general form for graph classes of which result is not a single iteration on Entities, but a nested one : External iteration works on sub-parts, identified by each class (according to its algorithm) Internal Iteration concerns Entities of a sub-part Sub-Parts are assumed to be disjoined; if they are not, the first one has priority |
| IFSelect | Gives tools to manage Selecting a group of Entities processed by an Interface, for instance to divide up an original Model (from a File) to several smaller ones They use description of an Interface Model as a graph |
| IFSelect_Act | Act gives a simple way to define and add functions to be ran from a SessionPilot, as follows : |
| IFSelect_Activator | Defines the general frame for working with a SessionPilot. Each Activator treats a set of Commands. Commands are given as alphanumeric strings. They can be of two main forms : |
| IFSelect_AppliedModifiers | This class allows to memorize and access to the modifiers which are to be applied to a file. To each modifier, is bound a list of integers (optionnal) : if this list is absent, the modifier applies to all the file. Else, it applies to the entities designated by these numbers in the produced file |
| IFSelect_BasicDumper | BasicDumper takes into account, for SessionFile, all the classes defined in the package IFSelect : Selections, Dispatches (there is no Modifier) |
| IFSelect_CheckCounter | A CheckCounter allows to see a CheckList (i.e. CheckIterator) not per entity, its messages, but per message, the entities attached (count and list). Because many messages can be repeated if they are due to systematic errors |
| IFSelect_ContextModif | This class gathers various informations used by Model Modifiers apart from the target model itself, and the CopyTool which must be passed directly |
| IFSelect_ContextWrite | This class gathers various informations used by File Modifiers apart from the writer object, which is specific of the norm and of the physical format |
| IFSelect_Dispatch | This class allows to describe how a set of Entities has to be dispatched into resulting Packets : a Packet is a sub-set of the initial set of entities |
| IFSelect_DispGlobal | A DispGlobal gathers all the input Entities into only one global Packet |
| IFSelect_DispPerCount | A DispPerCount gathers all the input Entities into one or several Packets, each containing a defined count of Entity This count is a Parameter of the DispPerCount, given as an IntParam, thus allowing external control of its Value |
| IFSelect_DispPerFiles | A DispPerFiles produces a determined count of Packets from the input Entities. It divides, as equally as possible, the input list into a count of files. This count is the parameter of the DispPerFiles. If the input list has less than this count, of course there will be one packet per input entity. This count is a Parameter of the DispPerFiles, given as an IntParam, thus allowing external control of its Value |
| IFSelect_DispPerOne | A DispPerOne gathers all the input Entities into as many Packets as there Root Entities from the Final Selection, that is, one Packet per Entity |
| IFSelect_DispPerSignature | A DispPerSignature sorts input Entities according to a Signature : it works with a SignCounter to do this |
| IFSelect_EditForm | An EditForm is the way to apply an Editor on an Entity or on the Model It gives read-only or read-write access, with or without undo |
| IFSelect_Editor | An Editor defines a set of values and a way to edit them, on an entity or on the model (e.g. on its header) |
| IFSelect_Functions | Functions gives access to all the actions which can be commanded with the resources provided by IFSelect : especially WorkSession and various types of Selections and Dispatches |
| IFSelect_GeneralModifier | This class gives a frame for Actions which modify the effect of a Dispatch, i.e. : By Selections and Dispatches, an original Model can be splitted into one or more "target" Models : these Models contain Entities copied from the original one (that is, a part of it). Basically, these dispatched Entities are copied as identical to their original counterparts. Also the copied Models reproduce the Header of the original one |
| IFSelect_GraphCounter | A GraphCounter computes values to be sorted with the help of a Graph. I.E. not from a Signature |
| IFSelect_HSeqOfSelection | |
| IFSelect_IntParam | This class simply allows to access an Integer value through a Handle, as a String can be (by using HString). Hence, this value can be accessed : read and modified, without passing through the specific object which detains it. Thus, parameters of a Selection or a Dispatch (according its type) can be controlled directly from the ShareOut which contains them |
| IFSelect_ListEditor | A ListEditor is an auxiliary operator for Editor/EditForm I.E. it works on parameter values expressed as strings |
| IFSelect_ModelCopier | This class performs the Copy operations involved by the description of a ShareOut (evaluated by a ShareOutResult) plus, if there are, the Modifications on the results, with the help of Modifiers. Each Modifier can work on one or more resulting packets, accoding its criteria : it operates on a Model once copied and filled with the content of the packet |
| IFSelect_ModifEditForm | This modifier applies an EditForm on the entities selected |
| IFSelect_Modifier | This class gives a frame for Actions which can work globally on a File once completely defined (i.e. afterwards) |
| IFSelect_ModifReorder | This modifier reorders a whole model from its roots, i.e. according to <rootlast> status, it considers each of its roots, then it orders all its shared entities at any level, the result begins by the lower level entities ... ends by the roots |
| IFSelect_PacketList | This class gives a simple way to return then consult a list of packets, determined from the content of a Model, by various criteria |
| IFSelect_ParamEditor | A ParamEditor gives access for edition to a list of TypedValue (i.e. of Static too) Its definition is made of the TypedValue to edit themselves, and can add some constants, which can then be displayed but not changed (for instance, system name, processor version ...) |
| IFSelect_SelectAnyList | A SelectAnyList kind Selection selects a List of an Entity, as well as this Entity contains some. A List contains sub-entities as one per Item, or several (for instance if an Entity binds couples of sub-entities, each item is one of these couples). Remark that only Entities are taken into account (neither Reals, nor Strings, etc...) |
| IFSelect_SelectAnyType | A SelectAnyType sorts the Entities of which the Type is Kind of a given Type : this Type for Match is specific of each class of SelectAnyType |
| IFSelect_SelectBase | SelectBase works directly from an InterfaceModel : it is the first base for other Selections |
| IFSelect_SelectCombine | A SelectCombine type Selection defines algebraic operations between results of several Selections It is a deferred class : sub-classes will have to define precise what operator is to be applied |
| IFSelect_SelectControl | A SelectControl kind Selection works with two input Selections in a dissymmetric way : the Main Input which gives an input list of Entities, to be processed, and the Second Input which gives another list, to be used to filter the main input |
| IFSelect_SelectDeduct | A SelectDeduct determines a list of Entities from an Input Selection, by a computation : Output list is not obliged to be a sub-list of Input list (for more specific, see SelectExtract for filtered sub-lists, and SelectExplore for recurcive exploration) |
| IFSelect_SelectDiff | A SelectDiff keeps the entities from a Selection, the Main Input, which are not listed by the Second Input |
| IFSelect_SelectEntityNumber | A SelectEntityNumber gets in an InterfaceModel (through a Graph), the Entity which has a specified Number (its rank of adding into the Model) : there can be zero (if none) or one. The Number is not directly defined as an Integer, but as a Parameter, which can be externally controled |
| IFSelect_SelectErrorEntities | A SelectErrorEntities sorts the Entities which are qualified as "Error" (their Type has not been recognized) during reading a File. This does not concern Entities which are syntactically correct, but with incorrect data (for integrity constraints) |
| IFSelect_SelectExplore | A SelectExplore determines from an input list of Entities, a list obtained by a way of exploration. This implies the possibility of recursive exploration : the output list is itself reused as input, etc... Examples : Shared Entities, can be considered at one level (immediate shared) or more, or max level |
| IFSelect_SelectExtract | A SelectExtract determines a list of Entities from an Input Selection, as a sub-list of the Input Result It works by applying a sort criterium on each Entity of the Input. This criterium can be applied Direct to Pick Items (default case) or Reverse to Remove Item |
| IFSelect_SelectFlag | A SelectFlag queries a flag noted in the bitmap of the Graph. The Flag is designated by its Name. Flag Names are defined by Work Session and, as necessary, other functional objects |
| IFSelect_SelectIncorrectEntities | A SelectIncorrectEntities sorts the Entities which have been noted as Incorrect in the Graph of the Session (flag "Incorrect") It can find a result only if ComputeCheck has formerly been called on the WorkSession. Else, its result will be empty |
| IFSelect_SelectInList | A SelectInList kind Selection selects a List of an Entity, which is composed of single Entities To know the list on which to work, SelectInList has two deferred methods : NbItems (inherited from SelectAnyList) and ListedEntity (which gives an item as an Entity) which must be defined to get a List in an Entity of the required Type (and consider that list is empty if Entity has not required Type) |
| IFSelect_SelectIntersection | A SelectIntersection filters the Entities issued from several other Selections as Intersection of results : "AND" operator |
| IFSelect_Selection | A Selection allows to define a set of Interface Entities. Entities to be put on an output file should be identified in a way as independant from such or such execution as possible. This permits to handle comprehensive criteria, and to replay them when a new variant of an input file has to be processed |
| IFSelect_SelectionIterator | Defines an Iterator on a list of Selections |
| IFSelect_SelectModelEntities | A SelectModelEntities gets all the Entities of an InterfaceModel |
| IFSelect_SelectModelRoots | A SelectModelRoots gets all the Root Entities of an InterfaceModel. Remember that a "Root Entity" is defined as having no Sharing Entity (if there is a Loop between Entities, none of them can be a "Root") |
| IFSelect_SelectPointed | This type of Selection is intended to describe a direct selection without an explicit criterium, for instance the result of picking viewed entities on a graphic screen |
| IFSelect_SelectRange | A SelectRange keeps or rejects a sub-set of the input set, that is the Entities of which rank in the iteration list is in a given range (for instance form 2nd to 6th, etc...) |
| IFSelect_SelectRootComps | A SelectRootComps sorts the Entities which are part of Strong Componants, local roots of a set of Entities : they can be Single Componants (containing one Entity) or Cycles This class gives a more secure result than SelectRoots (which considers only Single Componants) but is longer to work : it can be used when there can be or there are cycles in a Model For each cycle, one Entity is given arbitrarily Reject works as for SelectRoots : Strong Componants defined in the input list which are not local roots are given |
| IFSelect_SelectRoots | A SelectRoots sorts the Entities which are local roots of a set of Entities (not shared by other Entities inside this set, even if they are shared by other Entities outside it) |
| IFSelect_SelectSent | This class returns entities according sending to a file Once a model has been loaded, further sendings are recorded as status in the graph (for each value, a count of sendings) |
| IFSelect_SelectShared | A SelectShared selects Entities which are directly Shared by the Entities of the Input list |
| IFSelect_SelectSharing | A SelectSharing selects Entities which directly Share (Level One) the Entities of the Input list Remark : if an Entity of the Input List directly shares another one, it is of course present in the Result List |
| IFSelect_SelectSignature | A SelectSignature sorts the Entities on a Signature Matching. The signature to match is given at creation time. Also, the required match is given at creation time : exact (IsEqual) or contains (the Type's Name must contain the criterium Text) |
| IFSelect_SelectSignedShared | In the graph, explore the Shareds of the input entities, until it encounters some which match a given Signature (for a limited level, filters the returned list) By default, fitted for any level |
| IFSelect_SelectSignedSharing | In the graph, explore the sharings of the input entities, until it encounters some which match a given Signature (for a limited level, filters the returned list) By default, fitted for any level |
| IFSelect_SelectSuite | A SelectSuite can describe a suite of SelectDeduct as a unique one : in other words, it can be seen as a "macro selection" |
| IFSelect_SelectType | A SelectType keeps or rejects Entities of which the Type is Kind of a given Cdl Type |
| IFSelect_SelectUnion | A SelectUnion cumulates the Entities issued from several other Selections (union of results : "OR" operator) |
| IFSelect_SelectUnknownEntities | A SelectUnknownEntities sorts the Entities which are qualified as "Unknown" (their Type has not been recognized) |
| IFSelect_SequenceNodeOfSequenceOfAppliedModifiers | |
| IFSelect_SequenceNodeOfSequenceOfGeneralModifier | |
| IFSelect_SequenceNodeOfSequenceOfInterfaceModel | |
| IFSelect_SequenceNodeOfTSeqOfDispatch | |
| IFSelect_SequenceNodeOfTSeqOfSelection | |
| IFSelect_SequenceOfAppliedModifiers | |
| IFSelect_SequenceOfGeneralModifier | |
| IFSelect_SequenceOfInterfaceModel | |
| IFSelect_SessionDumper | A SessionDumper is called by SessionFile. It takes into account a set of classes (such as Selections, Dispatches ...). SessionFile writes the Type (as defined by cdl) of each Item and its general Parameters. It manages the names of the Items |
| IFSelect_SessionFile | A SessionFile is intended to manage access between a WorkSession and an Ascii Form, to be considered as a Dump. It allows to write the File from the WorkSession, and later read the File to the WorkSession, by keeping required descriptions (such as dependances) |
| IFSelect_SessionPilot | A SessionPilot is intended to make easier the use of a WorkSession. It receives commands, under alphanumeric form, then calls a library of Activators to interprete and run them |
| IFSelect_ShareOut | This class gathers the informations required to produce one or several file(s) from the content of an InterfaceModel (passing through the creation of intermediate Models) |
| IFSelect_ShareOutResult | This class gives results computed from a ShareOut : simulation before transfer, helps to list entities ... Transfer itself will later be performed, either by a TransferCopy to simply divide up a file, or a TransferDispatch which can be parametred with more details |
| IFSelect_SignAncestor | |
| IFSelect_Signature | Signature provides the basic service used by the classes SelectSignature and Counter (i.e. Name, Value), which is : |
| IFSelect_SignatureList | A SignatureList is given as result from a Counter (any kind) It gives access to a list of signatures, with counts, and optionally with list of corresponding entities |
| IFSelect_SignCategory | This Signature returns the Category of an entity, as recorded in the model |
| IFSelect_SignCounter | SignCounter gives the frame to count signatures associated with entities, deducted from them. Ex.: their Dynamic Type |
| IFSelect_SignMultiple | Multiple Signature : ordered list of other Signatures It concatenates on a same line the result of its sub-items separated by sets of 3 blanks It is possible to define tabulations between sub-items Moreover, match rules are specific |
| IFSelect_SignType | This Signature returns the cdl Type of an entity, under two forms : |
| IFSelect_SignValidity | This Signature returns the Validity Status of an entity, as deducted from data in the model : it can be "OK" "Unknown" "Unloaded" "Syntactic Fail"(but loaded) "Syntactic Warning" "Semantic Fail" "Semantic Warning" |
| IFSelect_Transformer | A Transformer defines the way an InterfaceModel is transformed (without sending it to a file). In order to work, each type of Transformer defines it method Perform, it can be parametred as needed |
| IFSelect_TransformStandard | This class runs transformations made by Modifiers, as the ModelCopier does when it produces files (the same set of Modifiers can then be used, as to transform the starting Model, as at file sending time) |
| IFSelect_TSeqOfDispatch | |
| IFSelect_TSeqOfSelection | |
| IFSelect_WorkLibrary | This class defines the (empty) frame which can be used to enrich a XSTEP set with new capabilities In particular, a specific WorkLibrary must give the way for Reading a File into a Model, and Writing a Model to a File Thus, it is possible to define several Work Libraries for each norm, but recommanded to define one general class for each one : this general class will define the Read and Write methods |
| IFSelect_WorkSession | This class can be used to simply manage a process such as splitting a file, extracting a set of Entities ... It allows to manage different types of Variables : Integer or Text Parameters, Selections, Dispatches, in addition to a ShareOut. To each of these variables, a unique Integer Identifier is attached. A Name can be attached too as desired |
| IGESAppli | This package represents collection of miscellaneous entities from IGES |
| IGESAppli_Array1OfFiniteElement | |
| IGESAppli_Array1OfFlow | |
| IGESAppli_Array1OfNode | |
| IGESAppli_DrilledHole | Defines DrilledHole, Type <406> Form <6> in package IGESAppli Identifies an entity representing a drilled hole through a printed circuit board |
| IGESAppli_ElementResults | Defines ElementResults, Type <148> in package IGESAppli Used to find the results of FEM analysis |
| IGESAppli_FiniteElement | Defines FiniteElement, Type <136> Form <0> in package IGESAppli Used to define a finite element with the help of an element topology |
| IGESAppli_Flow | Defines Flow, Type <402> Form <18> in package IGESAppli Represents a single signal or a single fluid flow path starting from a starting Connect Point Entity and including additional intermediate connect points |
| IGESAppli_FlowLineSpec | Defines FlowLineSpec, Type <406> Form <14> in package IGESAppli Attaches one or more text strings to entities being used to represent a flow line |
| IGESAppli_GeneralModule | Definition of General Services for IGESAppli (specific part) This Services comprise : Shared & Implied Lists, Copy, Check |
| IGESAppli_HArray1OfFiniteElement | |
| IGESAppli_HArray1OfFlow | |
| IGESAppli_HArray1OfNode | |
| IGESAppli_LevelFunction | Defines LevelFunction, Type <406> Form <3> in package IGESAppli Used to transfer the meaning or intended use of a level in the sending system |
| IGESAppli_LevelToPWBLayerMap | Defines LevelToPWBLayerMap, Type <406> Form <24> in package IGESAppli Used to correlate an exchange file level number with its corresponding native level identifier, physical PWB layer number and predefined functional level identification |
| IGESAppli_LineWidening | Defines LineWidening, Type <406> Form <5> in package IGESAppli Defines the characteristics of entities when they are used to define locations of items |
| IGESAppli_NodalConstraint | Defines NodalConstraint, Type <418> Form <0> in package IGESAppli Relates loads and/or constraints to specific nodes in the Finite Element Model by creating a relation between Node entities and Tabular Data Property that contains the load or constraint data |
| IGESAppli_NodalDisplAndRot | Defines NodalDisplAndRot, Type <138> Form <0> in package IGESAppli Used to communicate finite element post processing data |
| IGESAppli_NodalResults | Defines NodalResults, Type <146> in package IGESAppli Used to store the Analysis Data results per FEM Node |
| IGESAppli_Node | Defines Node, Type <134> Form <0> in package IGESAppli Geometric point used in the definition of a finite element |
| IGESAppli_PartNumber | Defines PartNumber, Type <406> Form <9> in package IGESAppli Attaches a set of text strings that define the common part numbers to an entity being used to represent a physical component |
| IGESAppli_PinNumber | Defines PinNumber, Type <406> Form <8> in package IGESAppli Used to attach a text string representing a component pin number to an entity being used to represent an electrical component's pin |
| IGESAppli_PipingFlow | Defines PipingFlow, Type <402> Form <20> in package IGESAppli Represents a single fluid flow path |
| IGESAppli_Protocol | Description of Protocol for IGESAppli |
| IGESAppli_PWBArtworkStackup | Defines PWBArtworkStackup, Type <406> Form <25> in package IGESAppli Used to communicate which exchange file levels are to be combined in order to create the artwork for a printed wire board (PWB). This property should be attached to the entity defining the printed wire assembly (PWA) or if no such entity exists, then the property should stand alone in the file |
| IGESAppli_PWBDrilledHole | Defines PWBDrilledHole, Type <406> Form <26> in package IGESAppli Used to identify an entity that locates a drilled hole and to specify the characteristics of the drilled hole |
| IGESAppli_ReadWriteModule | Defines basic File Access Module for IGESAppli (specific parts) Specific actions concern : Read and Write Own Parameters of an IGESEntity |
| IGESAppli_ReferenceDesignator | Defines ReferenceDesignator, Type <406> Form <7> in package IGESAppli Used to attach a text string containing the value of a component reference designator to an entity being used to represent a component |
| IGESAppli_RegionRestriction | Defines RegionRestriction, Type <406> Form <2> in package IGESAppli Defines regions to set an application's restriction over a region |
| IGESAppli_SpecificModule | Defines Services attached to IGES Entities : Dump & OwnCorrect, for IGESAppli |
| IGESAppli_ToolDrilledHole | Tool to work on a DrilledHole. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolElementResults | Tool to work on a ElementResults. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolFiniteElement | Tool to work on a FiniteElement. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolFlow | Tool to work on a Flow. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolFlowLineSpec | Tool to work on a FlowLineSpec. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolLevelFunction | Tool to work on a LevelFunction. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolLevelToPWBLayerMap | Tool to work on a LevelToPWBLayerMap. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolLineWidening | Tool to work on a LineWidening. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolNodalConstraint | Tool to work on a NodalConstraint. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolNodalDisplAndRot | Tool to work on a NodalDisplAndRot. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolNodalResults | Tool to work on a NodalResults. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolNode | Tool to work on a Node. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolPartNumber | Tool to work on a PartNumber. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolPinNumber | Tool to work on a PinNumber. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolPipingFlow | Tool to work on a PipingFlow. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolPWBArtworkStackup | Tool to work on a PWBArtworkStackup. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolPWBDrilledHole | Tool to work on a PWBDrilledHole. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolReferenceDesignator | Tool to work on a ReferenceDesignator. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESAppli_ToolRegionRestriction | Tool to work on a RegionRestriction. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic | This package represents basic entities from IGES |
| IGESBasic_Array1OfLineFontEntity | |
| IGESBasic_Array2OfHArray1OfReal | |
| IGESBasic_AssocGroupType | Defines AssocGroupType, Type <406> Form <23> in package IGESBasic Used to assign an unambiguous identification to a Group Associativity |
| IGESBasic_ExternalReferenceFile | Defines ExternalReferenceFile, Type <406> Form <12> in package IGESBasic References definitions residing in another file |
| IGESBasic_ExternalRefFile | Defines ExternalRefFile, Type <416> Form <1> in package IGESBasic Used when entire reference file is to be instanced |
| IGESBasic_ExternalRefFileIndex | Defines ExternalRefFileIndex, Type <402> Form <12> in package IGESBasic Contains a list of the symbolic names used by the referencing files and the DE pointers to the corresponding definitions within the referenced file |
| IGESBasic_ExternalRefFileName | Defines ExternalRefFileName, Type <416> Form <0-2> in package IGESBasic Used when single definition from the reference file is required or for external logical references where an entity in one file relates to an entity in another file |
| IGESBasic_ExternalRefLibName | Defines ExternalRefLibName, Type <416> Form <4> in package IGESBasic Used when it is assumed that a copy of the subfigure exists in native form in a library on the receiving system |
| IGESBasic_ExternalRefName | Defines ExternalRefName, Type <416> Form <3> in package IGESBasic Used when it is assumed that a copy of the subfigure exists in native form on the receiving system |
| IGESBasic_GeneralModule | Definition of General Services for IGESBasic (specific part) This Services comprise : Shared & Implied Lists, Copy, Check |
| IGESBasic_Group | Defines Group, Type <402> Form <1> in package IGESBasic The Group Associativity allows a collection of a set of entities to be maintained as a single, logical entity |
| IGESBasic_GroupWithoutBackP | Defines GroupWithoutBackP, Type <402> Form <7> in package IGESBasic this class defines a Group without back pointers |
| IGESBasic_HArray1OfHArray1OfIGESEntity | |
| IGESBasic_HArray1OfHArray1OfInteger | |
| IGESBasic_HArray1OfHArray1OfReal | |
| IGESBasic_HArray1OfHArray1OfXY | |
| IGESBasic_HArray1OfHArray1OfXYZ | |
| IGESBasic_HArray1OfLineFontEntity | |
| IGESBasic_HArray2OfHArray1OfReal | |
| IGESBasic_Hierarchy | Defines Hierarchy, Type <406> Form <10> in package IGESBasic Provides ability to control the hierarchy of each directory entry attribute |
| IGESBasic_Name | Defines Name, Type <406> Form <15> in package IGESBasic Used to specify a user defined name |
| IGESBasic_OrderedGroup | Defines OrderedGroup, Type <402> Form <14> in package IGESBasic this class defines an Ordered Group with back pointers Allows a collection of a set of entities to be maintained as a single entity, but the group is ordered. It inherits from Group |
| IGESBasic_OrderedGroupWithoutBackP | Defines OrderedGroupWithoutBackP, Type <402> Form <15> in package IGESBasic Allows a collection of a set of entities to be maintained as a single entity, but the group is ordered and there are no back pointers. It inherits from Group |
| IGESBasic_Protocol | Description of Protocol for IGESBasic |
| IGESBasic_ReadWriteModule | Defines basic File Access Module for IGESBasic (specific parts) Specific actions concern : Read and Write Own Parameters of an IGESEntity |
| IGESBasic_SingleParent | Defines SingleParent, Type <402> Form <9> in package IGESBasic It defines a logical structure of one independent (parent) entity and one or more subordinate (children) entities |
| IGESBasic_SingularSubfigure | Defines SingularSubfigure, Type <408> Form <0> in package IGESBasic Defines the occurrence of a single instance of the defined Subfigure |
| IGESBasic_SpecificModule | Defines Services attached to IGES Entities : Dump & OwnCorrect, for IGESBasic |
| IGESBasic_SubfigureDef | Defines SubfigureDef, Type <308> Form <0> in package IGESBasic This Entity permits a single definition of a detail to be utilized in multiple instances in the creation of the whole picture |
| IGESBasic_ToolAssocGroupType | Tool to work on a AssocGroupType. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolExternalReferenceFile | Tool to work on a ExternalReferenceFile. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolExternalRefFile | Tool to work on a ExternalRefFile. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolExternalRefFileIndex | Tool to work on a ExternalRefFileIndex. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolExternalRefFileName | Tool to work on a ExternalRefFileName. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolExternalRefLibName | Tool to work on a ExternalRefLibName. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolExternalRefName | Tool to work on a ExternalRefName. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolGroup | Tool to work on a Group. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolGroupWithoutBackP | Tool to work on a GroupWithoutBackP. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolHierarchy | Tool to work on a Hierarchy. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolName | Tool to work on a Name. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolOrderedGroup | Tool to work on a OrderedGroup. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolOrderedGroupWithoutBackP | Tool to work on a OrderedGroupWithoutBackP. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolSingleParent | Tool to work on a SingleParent. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolSingularSubfigure | Tool to work on a SingularSubfigure. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESBasic_ToolSubfigureDef | Tool to work on a SubfigureDef. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESCAFControl | Provides high-level API to translate IGES file to and from DECAF document |
| IGESCAFControl_Reader | Provides a tool to read IGES file and put it into DECAF document. Besides transfer of shapes (including assemblies) provided by IGESControl, supports also colors and part names IGESCAFControl_Reader reader; Methods for translation of an IGES file: reader.ReadFile("filename"); reader.Transfer(Document); or reader.Perform("filename",doc); Methods for managing reading attributes. Colors reader.SetColorMode(colormode); Standard_Boolean colormode = reader.GetColorMode(); Layers reader.SetLayerMode(layermode); Standard_Boolean layermode = reader.GetLayerMode(); Names reader.SetNameMode(namemode); Standard_Boolean namemode = reader.GetNameMode(); |
| IGESCAFControl_Writer | Provides a tool to write DECAF document to the IGES file. Besides transfer of shapes (including assemblies) provided by IGESControl, supports also colors and part names IGESCAFControl_Writer writer(); Methods for writing IGES file: writer.Transfer (Document); writer.Write("filename") or writer.Write(OStream) or writer.Perform(Document,"filename"); Methods for managing the writing of attributes. Colors writer.SetColorMode(colormode); Standard_Boolean colormode = writer.GetColorMode(); Layers writer.SetLayerMode(layermode); Standard_Boolean layermode = writer.GetLayerMode(); Names writer.SetNameMode(namemode); Standard_Boolean namemode = writer.GetNameMode(); |
| IGESControl_ActorWrite | Actor to write Shape to IGES |
| IGESControl_AlgoContainer | |
| IGESControl_Controller | Controller for IGES-5.1 |
| IGESControl_IGESBoundary | Translates IGES boundary entity (types 141, 142 and 508) in Advanced Data Exchange. Redefines translation and treatment methods from inherited open class IGESToBRep_IGESBoundary |
| IGESControl_Reader | Reads IGES files, checks them and translates their contents into Open CASCADE models. The IGES data can be that of a whole model or that of a specific list of entities in the model. As in XSControl_Reader, you specify the list using a selection. For translation of iges files it is possible to use the following sequence: To change parameters of translation class Interface_Static should be used before the beginning of translation (see IGES Parameters and General Parameters) Creation of reader IGESControl_Reader reader; To load a file in a model use method: reader.ReadFile("filename.igs") To check a loading file use method Check: reader.Check(failsonly); where failsonly is equal to Standard_True or Standard_False; To print the results of load: reader.PrintCheckLoad(failsonly,mode) where mode is equal to the value of enumeration IFSelect_PrintCount To transfer entities from a model the following methods can be used: for the whole model reader.TransferRoots(onlyvisible); where onlyvisible is equal to Standard_True or Standard_False; To transfer a list of entities: reader.TransferList(list); To transfer one entity reader.TransferEntity(ent) or reader.Transfer(num); To obtain a result the following method can be used: reader.IsDone() reader.NbShapes() and reader.Shape(num); or reader.OneShape(); To print the results of transfer use method: reader.PrintTransferInfo(failwarn,mode); where printfail is equal to the value of enumeration IFSelect_PrintFail, mode see above. Gets correspondence between an IGES entity and a result shape obtained therefrom. reader.TransientProcess(); TopoDS_Shape shape = TransferBRep::ShapeResult(reader.TransientProcess(),ent); |
| IGESControl_ToolContainer | |
| IGESControl_Writer | This class creates and writes IGES files from CAS.CADE models. An IGES file can be written to an existing IGES file or to a new one. The translation can be performed in one or several operations. Each translation operation outputs a distinct root entity in the IGES file. To write an IGES file it is possible to use the following sequence: To modify the IGES file header or to change translation parameters it is necessary to use class Interface_Static (see IGESParameters and GeneralParameters) |
| IGESConvGeom | This package is intended to gather geometric conversion which are not immediate but can be used for several purposes : mainly, standard conversion to and from CasCade geometric and topologic data, and adaptations of IGES files as required (as replacing Spline entities to BSpline equivalents) |
| IGESConvGeom_GeomBuilder | This class provides some useful basic tools to build IGESGeom curves, especially : define a curve in a plane in 3D space (ex. Circular or Conic arc, or Copious Data defined in 2D) make a CopiousData from a list of points/vectors |
| IGESData | Basic description of an IGES Interface |
| IGESData_Array1OfDirPart | |
| IGESData_Array1OfIGESEntity | |
| IGESData_BasicEditor | This class provides various functions of basic edition, such as : |
| IGESData_ColorEntity | Defines required type for Color in directory part an effective Color entity must inherits it |
| IGESData_DefaultGeneral | Processes the specific case of UndefinedEntity from IGESData (Case Number 1) |
| IGESData_DefaultSpecific | Specific IGES Services for UndefinedEntity, FreeFormatEntity |
| IGESData_DefSwitch | Description of a directory componant which can be either undefined (let Void), defined as a Reference to an entity, or as a Rank, integer value adressing a builtin table The entity reference is not included here, only reference status is kept (because entity type must be adapted) |
| IGESData_DirChecker | This class centralizes general Checks upon an IGES Entity's Directory Part. That is : such field Ignored or Required, or Required with a given Value (for an Integer field) More precise checks can be performed as necessary, by each Entity (method OwnCheck) |
| IGESData_DirPart | Litteral/numeric description of an entity's directory section, taken from file |
| IGESData_FileProtocol | This class allows to define complex protocols, in order to treat various sub-sets (or the complete set) of the IGES Norm, such as Solid + Draw (which are normally independant), etc... While it inherits Protocol from IGESData, it admits UndefinedEntity too |
| IGESData_FileRecognizer | |
| IGESData_FreeFormatEntity | This class allows to create IGES Entities in a literal form : their definition is free, but they are not recognized as instances of specific classes |
| IGESData_GeneralModule | Definition of General Services adapted to IGES. This Services comprise : Shared & Implied Lists, Copy, Check They are adapted according to the organisation of IGES Entities : Directory Part, Lists of Associativities and Properties are specifically processed |
| IGESData_GlobalNodeOfSpecificLib | |
| IGESData_GlobalNodeOfWriterLib | |
| IGESData_GlobalSection | Description of a global section (corresponds to file header) used as well in IGESModel, IGESReader and IGESWriter Warning : From IGES-5.1, a parameter is added : LastChangeDate (concerns transferred set of data, not the file itself) Of course, it can be absent if read from earlier versions (a default is then to be set to current date) From 5.3, one more : ApplicationProtocol (optional) |
| IGESData_HArray1OfIGESEntity | |
| IGESData_IGESDumper | Provides a way to obtain a clear Dump of an IGESEntity (distinct from normalized output). It works with tools attached to Entities, as for normalized Reade and Write |
| IGESData_IGESEntity | Defines root of IGES Entity definition, including Directory Part, lists of (optionnal) Properties and Associativities |
| IGESData_IGESModel | Defines the file header and entities for IGES files. These headers and entities result from a complete data translation using the IGES data exchange processor. Each entity is contained in a single model only and has a unique identifier. You can access this identifier using the method Number. Gives an access to the general data in the Start and the Global sections of an IGES file. The IGES file includes the following sections: -Start, -Global, -Directory Entry, -Parameter Data, -Terminate |
| IGESData_IGESReaderData | Specific FileReaderData for IGES contains header as GlobalSection, and for each Entity, its directory part as DirPart, list of Parameters as ParamSet Each Item has a DirPart, plus classically a ParamSet and the correspondant recognized Entity (inherited from FileReaderData) Parameters are accessed through specific objects, ParamReaders |
| IGESData_IGESReaderTool | Specific FileReaderTool for IGES Parameters are accessed through specific objects, ParamReaders |
| IGESData_IGESType | Taken from directory part of an entity (from file or model), gives "type" and "form" data, used to recognize entity's type |
| IGESData_IGESWriter | Manages atomic file writing, under control of IGESModel : prepare text to be sent then sends it takes into account distinction between successive Sections |
| IGESData_LabelDisplayEntity | Defines required type for LabelDisplay in directory part an effective LabelDisplay entity must inherits it |
| IGESData_LevelListEntity | Defines required type for LevelList in directory part an effective LevelList entity must inherits it |
| IGESData_LineFontEntity | Defines required type for LineFont in directory part an effective LineFont entity must inherits it |
| IGESData_NameEntity | NameEntity is a kind of IGESEntity which can provide a Name under alphanumeric (String) form, from Properties list an effective Name entity must inherit it |
| IGESData_NodeOfSpecificLib | |
| IGESData_NodeOfWriterLib | |
| IGESData_ParamCursor | Auxiliary class for ParamReader. It stores commands for a ParamReader to manage the current parameter number. Used by methods Read... from ParamReader. It allows to define the following commands : |
| IGESData_ParamReader | Access to a list of parameters, with management of read stage (owned parameters, properties, associativities) and current parameter number, read errors (which feed a Check), plus convenient facilities to read parameters, in particular : |
| IGESData_Protocol | Description of basic Protocol for IGES This comprises treatement of IGESModel and Recognition of Undefined-FreeFormat-Entity |
| IGESData_ReadWriteModule | Defines basic File Access Module, under the control of IGESReaderTool for Reading and IGESWriter for Writing : Specific actions concern : Read and Write Own Parameters of an IGESEntity. The common parts (Directory Entry, Lists of Associativities and Properties) are processed by IGESReaderTool & IGESWriter |
| IGESData_SingleParentEntity | SingleParentEntity is a kind of IGESEntity which can refer to a (Single) Parent, from Associativities list of an Entity a effective SingleParent definition entity must inherit it |
| IGESData_SpecificLib | |
| IGESData_SpecificModule | This class defines some Services which are specifically attached to IGES Entities : Dump |
| IGESData_ToolLocation | This Tool determines and gives access to effective Locations of IGES Entities as defined by the IGES Norm. These Locations can be for each Entity : |
| IGESData_TransfEntity | Defines required type for Transf in directory part an effective Transf entity must inherits it |
| IGESData_UndefinedEntity | Undefined (unknown or error) entity specific of IGES DirPart can be correct or not : if it is not, a flag indicates it, and each corrupted field has an associated error flag |
| IGESData_ViewKindEntity | Defines required type for ViewKind in directory part that is, Single view or Multiple view An effective ViewKind entity must inherit it and define IsSingle (True for Single, False for List of Views), NbViews and ViewItem (especially for a List) |
| IGESData_WriterLib | |
| IGESDefs | To embody general definitions of Entities (Parameters, Tables ...) |
| IGESDefs_Array1OfTabularData | |
| IGESDefs_AssociativityDef | Defines IGES Associativity Definition Entity, Type <302> Form <5001 - 9999> in package IGESDefs. This class permits the preprocessor to define an associativity schema. i.e., by using it preprocessor defines the type of relationship |
| IGESDefs_AttributeDef | Defines IGES Attribute Table Definition Entity, Type <322> Form [0, 1, 2] in package IGESDefs. This is class is used to support the concept of well defined collection of attributes, whether it is a table or a single row of attributes |
| IGESDefs_AttributeTable | Defines IGES Attribute Table, Type <422> Form <0, 1> in package IGESDefs This class is used to represent an occurence of Attribute Table. This Class may be independent or dependent or pointed at by other Entities |
| IGESDefs_GeneralModule | Definition of General Services for IGESDefs (specific part) This Services comprise : Shared & Implied Lists, Copy, Check |
| IGESDefs_GenericData | Defines IGES Generic Data, Type <406> Form <27> in package IGESDefs Used to communicate information defined by the system operator while creating the model. The information is system specific and does not map into one of the predefined properties or associativities. Properties and property values can be defined by multiple instances of this property |
| IGESDefs_HArray1OfHArray1OfTextDisplayTemplate | |
| IGESDefs_HArray1OfTabularData | |
| IGESDefs_MacroDef | Defines IGES Macro Definition Entity, Type <306> Form <0> in package IGESDefs This Class specifies the action of a specific MACRO. After specification MACRO can be used as necessary by means of MACRO class instance entity |
| IGESDefs_Protocol | Description of Protocol for IGESDefs |
| IGESDefs_ReadWriteModule | Defines Defs File Access Module for IGESDefs (specific parts) Specific actions concern : Read and Write Own Parameters of an IGESEntity |
| IGESDefs_SpecificModule | Defines Services attached to IGES Entities : Dump, for IGESDefs |
| IGESDefs_TabularData | Defines IGES Tabular Data, Type <406> Form <11>, in package IGESDefs This Class is used to provide a Structure to accomodate point form data |
| IGESDefs_ToolAssociativityDef | Tool to work on a AssociativityDef. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDefs_ToolAttributeDef | Tool to work on a AttributeDef. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDefs_ToolAttributeTable | Tool to work on a AttributeTable. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDefs_ToolGenericData | Tool to work on a GenericData. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDefs_ToolMacroDef | Tool to work on a MacroDef. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDefs_ToolTabularData | Tool to work on a TabularData. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDefs_ToolUnitsData | Tool to work on a UnitsData. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDefs_UnitsData | Defines IGES UnitsData Entity, Type <316> Form <0> in package IGESDefs This class stores data about a model's fundamental units |
| IGESDimen | This package represents Entities applied to Dimensions ie. Annotation Entities and attached Properties and Associativities |
| IGESDimen_AngularDimension | Defines AngularDimension, Type <202> Form <0> in package IGESDimen Used to dimension angles |
| IGESDimen_Array1OfGeneralNote | |
| IGESDimen_Array1OfLeaderArrow | |
| IGESDimen_BasicDimension | Defines IGES Basic Dimension, Type 406, Form 31, in package IGESDimen The basic Dimension Property indicates that the referencing dimension entity is to be displayed with a box around text |
| IGESDimen_CenterLine | Defines CenterLine, Type <106> Form <20-21> in package IGESDimen Is an entity appearing as crosshairs or as a construction between 2 positions |
| IGESDimen_CurveDimension | Defines CurveDimension, Type <204> Form <0> in package IGESDimen Used to dimension curves Consists of one tail segment of nonzero length beginning with an arrowhead and which serves to define the orientation |
| IGESDimen_DiameterDimension | Defines DiameterDimension, Type <206> Form <0> in package IGESDimen Used for dimensioning diameters |
| IGESDimen_DimensionDisplayData | Defines IGES Dimension Display Data, Type <406> Form <30>, in package IGESDimen The Dimensional Display Data Property is optional but when present must be referenced by a dimension entity. The information it contains could be extracted from the text, leader and witness line data with difficulty |
| IGESDimen_DimensionedGeometry | Defines IGES Dimensioned Geometry, Type <402> Form <13>, in package IGESDimen This entity has been replaced by the new form of Dimensioned Geometry Associativity Entity (Type 402, Form 21) and should no longer be used by preprocessors |
| IGESDimen_DimensionTolerance | Defines Dimension Tolerance, Type <406>, Form <29> in package IGESDimen Provides tolerance information for a dimension which can be used by the receiving system to regenerate the dimension |
| IGESDimen_DimensionUnits | Defines Dimension Units, Type <406>, Form <28> in package IGESDimen Describes the units and formatting details of the nominal value of a dimension |
| IGESDimen_FlagNote | Defines FlagNote, Type <208> Form <0> in package IGESDimen Is label information formatted in different ways |
| IGESDimen_GeneralLabel | Defines GeneralLabel, Type <210> Form <0> in package IGESDimen Used for general labeling with leaders |
| IGESDimen_GeneralModule | Definition of General Services for IGESDimen (specific part) This Services comprise : Shared & Implied Lists, Copy, Check |
| IGESDimen_GeneralNote | Defines GeneralNote, Type <212> Form <0-8, 100-200, 105> in package IGESDimen Used for formatting boxed text in different ways |
| IGESDimen_GeneralSymbol | Defines General Symbol, Type <228>, Form <0-3,5001-9999> in package IGESDimen Consists of zero or one (Form 0) or one (all other forms), one or more geometry entities which define a symbol, and zero, one or more associated leaders |
| IGESDimen_HArray1OfGeneralNote | |
| IGESDimen_HArray1OfLeaderArrow | |
| IGESDimen_LeaderArrow | Defines LeaderArrow, Type <214> Form <1-12> in package IGESDimen Consists of one or more line segments except when leader is part of an angular dimension, with links to presumed text item |
| IGESDimen_LinearDimension | Defines LinearDimension, Type <216> Form <0> in package IGESDimen Used for linear dimensioning |
| IGESDimen_NewDimensionedGeometry | Defines New Dimensioned Geometry, Type <402>, Form <21> in package IGESDimen Links a dimension entity with the geometry entities it is dimensioning, so that later, in the receiving database, the dimension can be automatically recalculated and redrawn should the geometry be changed |
| IGESDimen_NewGeneralNote | Defines NewGeneralNote, Type <213> Form <0> in package IGESDimen Further attributes for formatting text strings |
| IGESDimen_OrdinateDimension | Defines IGES Ordinate Dimension, Type <218> Form <0, 1>, in package IGESDimen Note : The ordinate dimension entity is used to indicate dimensions from a common base line. Dimensioning is only permitted along the XT or YT axis |
| IGESDimen_PointDimension | Defines IGES Point Dimension, Type <220> Form <0>, in package IGESDimen A Point Dimension Entity consists of a leader, text, and an optional circle or hexagon enclosing the text IGES specs for this entity mention SimpleClosedPlanarCurve Entity(106/63)which is not listed in LIST.Text In the sequel we have ignored this & considered only the other two entity for representing the hexagon or circle enclosing the text |
| IGESDimen_Protocol | Description of Protocol for IGESDimen |
| IGESDimen_RadiusDimension | Defines IGES Radius Dimension, type <222> Form <0, 1>, in package IGESDimen. A Radius Dimension Entity consists of a General Note, a leader, and an arc center point. A second form of this entity accounts for the occasional need to have two leader entities referenced |
| IGESDimen_ReadWriteModule | Defines Dimen File Access Module for IGESDimen (specific parts) Specific actions concern : Read and Write Own Parameters of an IGESEntity |
| IGESDimen_Section | Defines Section, Type <106> Form <31-38> in package IGESDimen Contains information to display sectioned sides |
| IGESDimen_SectionedArea | Defines IGES Sectioned Area, Type <230> Form <0>, in package IGESDimen A sectioned area is a portion of a design which is to be filled with a pattern of lines. Ordinarily, this entity is used to reveal or expose shape or material characteri- stics defined by other entities. It consists of a pointer to an exterior definition curve, a specification of the pattern of lines, the coordinates of a point on a pattern line, the distance between the pattern lines, the angle between the pattern lines and the X-axis of definition space, and the specification of any enclosed definition curves (commonly known as islands) |
| IGESDimen_SpecificModule | Defines Services attached to IGES Entities : Dump & OwnCorrect, for IGESDimen |
| IGESDimen_ToolAngularDimension | Tool to work on a AngularDimension. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolBasicDimension | Tool to work on a BasicDimension. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolCenterLine | Tool to work on a CenterLine. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolCurveDimension | Tool to work on a CurveDimension. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolDiameterDimension | Tool to work on a DiameterDimension. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolDimensionDisplayData | Tool to work on a DimensionDisplayData. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolDimensionedGeometry | Tool to work on a DimensionedGeometry. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolDimensionTolerance | Tool to work on a DimensionTolerance. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolDimensionUnits | Tool to work on a DimensionUnits. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolFlagNote | Tool to work on a FlagNote. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolGeneralLabel | Tool to work on a GeneralLabel. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolGeneralNote | Tool to work on a GeneralNote. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolGeneralSymbol | Tool to work on a GeneralSymbol. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolLeaderArrow | Tool to work on a LeaderArrow. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolLinearDimension | Tool to work on a LinearDimension. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolNewDimensionedGeometry | Tool to work on a NewDimensionedGeometry. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolNewGeneralNote | Tool to work on a NewGeneralNote. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolOrdinateDimension | Tool to work on a OrdinateDimension. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolPointDimension | Tool to work on a PointDimension. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolRadiusDimension | Tool to work on a RadiusDimension. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolSection | Tool to work on a Section. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolSectionedArea | Tool to work on a SectionedArea. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_ToolWitnessLine | Tool to work on a WitnessLine. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDimen_WitnessLine | Defines WitnessLine, Type <106> Form <40> in package IGESDimen Contains one or more straight line segments associated with drafting entities of various types |
| IGESDraw | This package contains the group of classes necessary for Structure Entities implied in Drawings and Structured Graphics (Sets for drawing, Drawings and Views) |
| IGESDraw_Array1OfConnectPoint | |
| IGESDraw_Array1OfViewKindEntity | |
| IGESDraw_CircArraySubfigure | Defines IGES Circular Array Subfigure Instance Entity, Type <414> Form Number <0> in package IGESDraw |
| IGESDraw_ConnectPoint | Defines IGESConnectPoint, Type <132> Form Number <0> in package IGESDraw |
| IGESDraw_Drawing | Defines IGESDrawing, Type <404> Form <0> in package IGESDraw |
| IGESDraw_DrawingWithRotation | Defines IGESDrawingWithRotation, Type <404> Form <1> in package IGESDraw |
| IGESDraw_GeneralModule | Definition of General Services for IGESDraw (specific part) This Services comprise : Shared & Implied Lists, Copy, Check |
| IGESDraw_HArray1OfConnectPoint | |
| IGESDraw_HArray1OfViewKindEntity | |
| IGESDraw_LabelDisplay | Defines IGESLabelDisplay, Type <402> Form <5> in package IGESDraw |
| IGESDraw_NetworkSubfigure | Defines IGES Network Subfigure Instance Entity, Type <420> Form Number <0> in package IGESDraw |
| IGESDraw_NetworkSubfigureDef | Defines IGESNetworkSubfigureDef, Type <320> Form Number <0> in package IGESDraw |
| IGESDraw_PerspectiveView | Defines IGESPerspectiveView, Type <410> Form <1> in package IGESDraw |
| IGESDraw_Planar | Defines IGESPlanar, Type <402> Form <16> in package IGESDraw |
| IGESDraw_Protocol | Description of Protocol for IGESDraw |
| IGESDraw_ReadWriteModule | Defines Draw File Access Module for IGESDraw (specific parts) Specific actions concern : Read and Write Own Parameters of an IGESEntity |
| IGESDraw_RectArraySubfigure | Defines IGES Rectangular Array Subfigure Instance Entity, Type <412> Form Number <0> in package IGESDraw Used to produce copies of object called the base entity, arranging them in equally spaced rows and columns |
| IGESDraw_SegmentedViewsVisible | Defines IGESSegmentedViewsVisible, Type <402> Form <19> in package IGESDraw |
| IGESDraw_SpecificModule | Defines Services attached to IGES Entities : Dump & OwnCorrect, for IGESDraw |
| IGESDraw_ToolCircArraySubfigure | Tool to work on a CircArraySubfigure. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolConnectPoint | Tool to work on a ConnectPoint. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolDrawing | Tool to work on a Drawing. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolDrawingWithRotation | Tool to work on a DrawingWithRotation. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolLabelDisplay | Tool to work on a LabelDisplay. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolNetworkSubfigure | Tool to work on a NetworkSubfigure. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolNetworkSubfigureDef | Tool to work on a NetworkSubfigureDef. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolPerspectiveView | Tool to work on a PerspectiveView. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolPlanar | Tool to work on a Planar. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolRectArraySubfigure | Tool to work on a RectArraySubfigure. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolSegmentedViewsVisible | Tool to work on a SegmentedViewsVisible. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolView | Tool to work on a View. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolViewsVisible | Tool to work on a ViewsVisible. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_ToolViewsVisibleWithAttr | Tool to work on a ViewsVisibleWithAttr. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESDraw_View | Defines IGES View Entity, Type <410> Form <0> in package IGESDraw |
| IGESDraw_ViewsVisible | Defines IGESViewsVisible, Type <402>, Form <3> in package IGESDraw |
| IGESDraw_ViewsVisibleWithAttr | Defines IGESViewsVisibleWithAttr, Type <402>, Form <4> in package IGESDraw |
| IGESGeom | This package consists of B-Rep and CSG Solid entities |
| IGESGeom_Array1OfBoundary | |
| IGESGeom_Array1OfCurveOnSurface | |
| IGESGeom_Array1OfTransformationMatrix | |
| IGESGeom_Boundary | Defines IGESBoundary, Type <141> Form <0> in package IGESGeom A boundary entity identifies a surface boundary consisting of a set of curves lying on the surface |
| IGESGeom_BoundedSurface | Defines BoundedSurface, Type <143> Form <0> in package IGESGeom A bounded surface is used to communicate trimmed surfaces. The surface and trimming curves are assumed to be represented parametrically |
| IGESGeom_BSplineCurve | Defines IGESBSplineCurve, Type <126> Form <0-5> in package IGESGeom A parametric equation obtained by dividing two summations involving weights (which are real numbers), the control points, and B-Spline basis functions |
| IGESGeom_BSplineSurface | Defines IGESBSplineSurface, Type <128> Form <0-9> in package IGESGeom A parametric equation obtained by dividing two summations involving weights (which are real numbers), the control points, and B-Spline basis functions |
| IGESGeom_CircularArc | Defines IGESCircularArc, Type <100> Form <0> in package IGESGeom A circular arc is a connected portion of a parent circle which consists of more than one point. The definition space coordinate system is always chosen so that the circular arc remains in a plane either coincident with or parallel to the XT, YT plane |
| IGESGeom_CompositeCurve | Defines IGESCompositeCurve, Type <102> Form <0> in package IGESGeom A composite curve is defined as an ordered list of entities consisting of a point, connect point and parametrised curve entities (excluding the CompositeCurve entity) |
| IGESGeom_ConicArc | Defines IGESConicArc, Type <104> Form <0-3> in package IGESGeom A conic arc is a bounded connected portion of a parent conic curve which consists of more than one point. The parent conic curve is either an ellipse, a parabola, or a hyperbola. The definition space coordinate system is always chosen so that the conic arc lies in a plane either coincident with or parallel to XT, YT plane. Within such a plane a conic is defined by the six coefficients in the following equation. A*XT^2 + B*XT*YT + C*YT^2 + D*XT + E*YT + F = 0 |
| IGESGeom_CopiousData | Defines IGESCopiousData, Type <106> Form <1-3,11-13,63> in package IGESGeom This entity stores data points in the form of pairs, triples, or sextuples. An interpretation flag value signifies which of these forms is being used |
| IGESGeom_CurveOnSurface | Defines IGESCurveOnSurface, Type <142> Form <0> in package IGESGeom A curve on a parametric surface entity associates a given curve with a surface and identifies the curve as lying on the surface |
| IGESGeom_Direction | Defines IGESDirection, Type <123> Form <0> in package IGESGeom A direction entity is a non-zero vector in Euclidean 3-space that is defined by its three components (direction ratios) with respect to the coordinate axes. If x, y, z are the direction ratios then (x^2 + y^2 + z^2) > 0 |
| IGESGeom_Flash | Defines IGESFlash, Type <125> Form <0 - 4> in package IGESGeom A flash entity is a point in the ZT=0 plane that locates a particular closed area. That closed area can be defined in one of two ways. First, it can be an arbitrary closed area defined by any entity capable of defining a closed area. The points of this entity must all lie in the ZT=0 plane. Second, it can be a member of a predefined set of flash shapes |
| IGESGeom_GeneralModule | Definition of General Services for IGESGeom (specific part) This Services comprise : Shared & Implied Lists, Copy, Check |
| IGESGeom_HArray1OfBoundary | |
| IGESGeom_HArray1OfCurveOnSurface | |
| IGESGeom_HArray1OfTransformationMatrix | |
| IGESGeom_Line | Defines IGESLine, Type <110> Form <0> in package IGESGeom A line is a bounded, connected portion of a parent straight line which consists of more than one point. A line is defined by its end points |
| IGESGeom_OffsetCurve | Defines IGESOffsetCurve, Type <130> Form <0> in package IGESGeom An OffsetCurve entity contains the data necessary to determine the offset of a given curve C. This entity points to the base curve to be offset and contains offset distance and other pertinent information |
| IGESGeom_OffsetSurface | Defines IGESOffsetSurface, Type <140> Form <0> in package IGESGeom An offset surface is a surface defined in terms of an already existing surface.If S(u, v) is a parametrised regular surface and N(u, v) is a differential field of unit normal vectors defined on the whole surface, and "d" a fixed non zero real number, then offset surface to S is a parametrised surface S(u, v) given by O(u, v) = S(u, v) + d * N(u, v); u1 <= u <= u2; v1 <= v <= v2; |
| IGESGeom_Plane | Defines IGESPlane, Type <108> Form <-1,0,1> in package IGESGeom A plane entity can be used to represent unbounded plane, as well as bounded portion of a plane. In either of the above cases the plane is defined within definition space by means of coefficients A, B, C, D where at least one of A, B, C is non-zero and A * XT + B * YT + C * ZT = D |
| IGESGeom_Point | Defines IGESPoint, Type <116> Form <0> in package IGESGeom |
| IGESGeom_Protocol | Description of Protocol for IGESGeom |
| IGESGeom_ReadWriteModule | Defines Geom File Access Module for IGESGeom (specific parts) Specific actions concern : Read and Write Own Parameters of an IGESEntity |
| IGESGeom_RuledSurface | Defines IGESRuledSurface, Type <118> Form <0-1> in package IGESGeom A ruled surface is formed by moving a line connecting points of equal relative arc length or equal relative parametric value on two parametric curves from a start point to a terminate point on the curves. The parametric curves may be points, lines, circles, conics, rational B-splines, parametric splines or any parametric curve defined in the IGES specification |
| IGESGeom_SpecificModule | Defines Services attached to IGES Entities : Dump & OwnCorrect, for IGESGeom |
| IGESGeom_SplineCurve | Defines IGESSplineCurve, Type <112> Form <0> in package IGESGeom The parametric spline is a sequence of parametric polynomial segments. The curve could be of the type Linear, Quadratic, Cubic, Wilson-Fowler, Modified Wilson-Fowler, B-Spline. The N polynomial segments are delimited by the break points T(1), T(2), T(3), ..., T(N+1) |
| IGESGeom_SplineSurface | Defines IGESSplineSurface, Type <114> Form <0> in package IGESGeom A parametric spline surface is a grid of polynomial patches. Patch could be of the type Linear, Quadratic, Cubic, Wilson-Fowler, Modified Wilson-Fowler, B-Spline The M * N grid of patches is defined by the 'u' break points TU(1), TU(2), ..., TU(M+1) and the 'v' break points TV(1), TV(2), TV(3) ..., TV(N+1) |
| IGESGeom_SurfaceOfRevolution | Defines IGESSurfaceOfRevolution, Type <120> Form <0> in package IGESGeom A surface of revolution is defined by an axis of rotation a generatrix, and start and terminate rotation angles. The surface is created by rotating the generatrix about the axis of rotation through the start and terminate rotation angles |
| IGESGeom_TabulatedCylinder | Defines IGESTabulatedCylinder, Type <122> Form <0> in package IGESGeom A tabulated cylinder is a surface formed by moving a line segment called generatrix parallel to itself along a curve called directrix. The curve may be a line, circular arc, conic arc, parametric spline curve, rational B-spline curve or composite curve |
| IGESGeom_ToolBoundary | Tool to work on a Boundary. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolBoundedSurface | Tool to work on a BoundedSurface. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolBSplineCurve | Tool to work on a BSplineCurve. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolBSplineSurface | Tool to work on a BSplineSurface. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolCircularArc | Tool to work on a CircularArc. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolCompositeCurve | Tool to work on a CompositeCurve. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolConicArc | Tool to work on a ConicArc. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolCopiousData | Tool to work on a CopiousData. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolCurveOnSurface | Tool to work on a CurveOnSurface. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolDirection | Tool to work on a Direction. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolFlash | Tool to work on a Flash. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolLine | Tool to work on a Line. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolOffsetCurve | Tool to work on a OffsetCurve. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolOffsetSurface | Tool to work on a OffsetSurface. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolPlane | Tool to work on a Plane. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolPoint | Tool to work on a Point. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolRuledSurface | Tool to work on a RuledSurface. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolSplineCurve | Tool to work on a SplineCurve. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolSplineSurface | Tool to work on a SplineSurface. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolSurfaceOfRevolution | Tool to work on a SurfaceOfRevolution. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolTabulatedCylinder | Tool to work on a TabulatedCylinder. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolTransformationMatrix | Tool to work on a TransformationMatrix. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_ToolTrimmedSurface | Tool to work on a TrimmedSurface. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGeom_TransformationMatrix | Defines IGESTransformationMatrix, Type <124> Form <0> in package IGESGeom The transformation matrix entity transforms three-row column vectors by means of matrix multiplication and then a vector addition. This entity can be considered as an "operator" entity in that it starts with the input vector, operates on it as described above, and produces the output vector |
| IGESGeom_TrimmedSurface | Defines IGESTrimmedSurface, Type <144> Form <0> in package IGESGeom A simple closed curve in Euclidean plane divides the plane in to two disjoint, open connected components; one bounded, one unbounded. The bounded one is called the interior region to the curve. Unbounded component is called exterior region to the curve. The domain of the trimmed surface is defined as the interior of the outer boundaries and exterior of the inner boundaries and includes the boundary curves |
| IGESGraph | This package contains the group of classes necessary to define Graphic data among Structure Entities. (e.g., Fonts, Colors, Screen management ...) |
| IGESGraph_Array1OfColor | |
| IGESGraph_Array1OfTextDisplayTemplate | |
| IGESGraph_Array1OfTextFontDef | |
| IGESGraph_Color | Defines IGESColor, Type <314> Form <0> in package IGESGraph |
| IGESGraph_DefinitionLevel | Defines IGESDefinitionLevel, Type <406> Form <1> in package IGESGraph |
| IGESGraph_DrawingSize | Defines IGESDrawingSize, Type <406> Form <16> in package IGESGraph |
| IGESGraph_DrawingUnits | Defines IGESDrawingUnits, Type <406> Form <17> in package IGESGraph |
| IGESGraph_GeneralModule | Definition of General Services for IGESGraph (specific part) This Services comprise : Shared & Implied Lists, Copy, Check |
| IGESGraph_HArray1OfColor | |
| IGESGraph_HArray1OfTextDisplayTemplate | |
| IGESGraph_HArray1OfTextFontDef | |
| IGESGraph_HighLight | Defines IGESHighLight, Type <406> Form <20> in package IGESGraph |
| IGESGraph_IntercharacterSpacing | Defines IGESIntercharacterSpacing, Type <406> Form <18> in package IGESGraph |
| IGESGraph_LineFontDefPattern | Defines IGESLineFontDefPattern, Type <304> Form <2> in package IGESGraph |
| IGESGraph_LineFontDefTemplate | Defines IGESLineFontDefTemplate, Type <304> Form <1> in package IGESGraph |
| IGESGraph_LineFontPredefined | Defines IGESLineFontPredefined, Type <406> Form <19> in package IGESGraph |
| IGESGraph_NominalSize | Defines IGESNominalSize, Type <406> Form <13> in package IGESGraph |
| IGESGraph_Pick | Defines IGESPick, Type <406> Form <21> in package IGESGraph |
| IGESGraph_Protocol | Description of Protocol for IGESGraph |
| IGESGraph_ReadWriteModule | Defines Graph File Access Module for IGESGraph (specific parts) Specific actions concern : Read and Write Own Parameters of an IGESEntity |
| IGESGraph_SpecificModule | Defines Services attached to IGES Entities : Dump & OwnCorrect, for IGESGraph |
| IGESGraph_TextDisplayTemplate | Defines IGES TextDisplayTemplate Entity, Type <312>, form <0, 1> in package IGESGraph |
| IGESGraph_TextFontDef | Defines IGES Text Font Definition Entity, Type <310> in package IGESGraph |
| IGESGraph_ToolColor | Tool to work on a Color. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolDefinitionLevel | Tool to work on a DefinitionLevel. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolDrawingSize | Tool to work on a DrawingSize. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolDrawingUnits | Tool to work on a DrawingUnits. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolHighLight | Tool to work on a HighLight. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolIntercharacterSpacing | Tool to work on a IntercharacterSpacing. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolLineFontDefPattern | Tool to work on a LineFontDefPattern. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolLineFontDefTemplate | Tool to work on a LineFontDefTemplate. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolLineFontPredefined | Tool to work on a LineFontPredefined. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolNominalSize | Tool to work on a NominalSize. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolPick | Tool to work on a Pick. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolTextDisplayTemplate | Tool to work on a TextDisplayTemplate. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolTextFontDef | Tool to work on a TextFontDef. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_ToolUniformRectGrid | Tool to work on a UniformRectGrid. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESGraph_UniformRectGrid | Defines IGESUniformRectGrid, Type <406> Form <22> in package IGESGraph |
| IGESSelect | This package defines the library of the most used tools for IGES Files : Selections & Modifiers specific to the IGES norm, and the most needed converters |
| IGESSelect_Activator | Performs Actions specific to IGESSelect, i.e. creation of IGES Selections and Dispatches, plus dumping specific to IGES |
| IGESSelect_AddFileComment | This class allows to add comment lines on writing an IGES File These lines are added to Start Section, instead of the only one blank line written by default |
| IGESSelect_AddGroup | Adds a Group to contain the entities designated by the Selection. If no Selection is given, nothing is done |
| IGESSelect_AutoCorrect | Does the absolutely effective corrections on IGES Entity. That is to say : regarding the norm in details, some values have mandatory values, or set of values with constraints. When such values/constraints are univoque, they can be forced. Also nullifies items of Directory Part, Associativities, and Properties, which are not (or not longer) in <target> Model |
| IGESSelect_ChangeLevelList | Changes Level List (in directory part) to a new single value Only entities attached to a LevelListEntity are considered If OldNumber is defined, only entities whose LevelList contains its Value are processed. Else all LevelLists are |
| IGESSelect_ChangeLevelNumber | Changes Level Number (as null or single) to a new single value Entities attached to a LevelListEntity are ignored Entities considered can be, either all Entities but those attached to a LevelListEntity, or Entities attached to a specific Level Number (0 for not defined) |
| IGESSelect_ComputeStatus | Computes Status of IGES Entities for a whole IGESModel. This concerns SubordinateStatus and UseFlag, which must have some definite values according the way they are referenced. (see definitions of Logical use, Physical use, etc...) |
| IGESSelect_CounterOfLevelNumber | This class gives information about Level Number. It counts entities according level number, considering also the multiple level (see the class LevelList) for which an entity is attached to each of the listed levels |
| IGESSelect_DispPerDrawing | This type of dispatch defines sets of entities attached to distinct drawings. This information is taken from attached views which appear in the Directory Part. Also Drawing Frames are considered when Drawings are part of input list |
| IGESSelect_DispPerSingleView | This type of dispatch defines sets of entities attached to distinct single views. This information appears in the Directory Part. Drawings are taken into account too, because of their frames (proper lists of annotations) |
| IGESSelect_Dumper | Dumper from IGESSelect takes into account, for SessionFile, the classes defined in the package IGESSelect : Selections, Dispatches, Modifiers |
| IGESSelect_EditDirPart | This class is aimed to display and edit the Directory Part of an IGESEntity |
| IGESSelect_EditHeader | This class is aimed to display and edit the Header of an IGES Model : Start Section and Global Section |
| IGESSelect_FileModifier | |
| IGESSelect_FloatFormat | This class gives control out format for floatting values : ZeroSuppress or no, Main Format, Format in Range (for values around 1.), as IGESWriter allows to manage it. Formats are given under C-printf form |
| IGESSelect_IGESName | IGESName is a Signature specific to IGESNorm : it considers the Name of an IGESEntity as being its ShortLabel (some sending systems use name, not to identify entities, but ratjer to classify them) |
| IGESSelect_IGESTypeForm | IGESTypeForm is a Signature specific to the IGES Norm : it gives the signature under two possible forms : |
| IGESSelect_ModelModifier | |
| IGESSelect_RebuildDrawings | Rebuilds Drawings which were bypassed to produce new models. If a set of entities, all put into a same IGESModel, were attached to a same Drawing in the starting Model, this Modifier rebuilds the original Drawing, but only with the transferred entities. This includes that all its views are kept too, but empty; and annotations are not kept. Drawing Name is renewed |
| IGESSelect_RebuildGroups | Rebuilds Groups which were bypassed to produce new models. If a set of entities, all put into a same IGESModel, were part of a same Group in the starting Model, this Modifier rebuilds the original group, but only with the transferred entities. The distinctions (Ordered or not, "WhithoutBackP" or not) are renewed, also the name of the group |
| IGESSelect_RemoveCurves | Removes Curves UV or 3D (not both !) from Faces, those designated by the Selection. No Selection means all the file |
| IGESSelect_SelectBasicGeom | This selection returns the basic geometric elements contained in an IGES Entity Intended to run a "quick" transfer. I.E. : |
| IGESSelect_SelectBypassGroup | Selects a list built as follows : Groups are entities type 402, forms 1,7,14,15 (Group, Ordered or not, "WithoutBackPointer" or not) |
| IGESSelect_SelectBypassSubfigure | Selects a list built as follows : Subfigures correspond to |
| IGESSelect_SelectDrawingFrom | This selection gets the Drawings attached to its input IGES entities. They are read through thr Single Views, referenced in Directory Parts of the entities |
| IGESSelect_SelectFaces | This selection returns the faces contained in an IGES Entity or itself if it is a Face Face means : |
| IGESSelect_SelectFromDrawing | This selection gets in all the model, the entities which are attached to the drawing(s) given as input. This includes : |
| IGESSelect_SelectFromSingleView | This selection gets in all the model, the entities which are attached to the views given as input. Only Single Views are considered. This information is kept from Directory Part (View Item) |
| IGESSelect_SelectLevelNumber | This selection looks at Level Number of IGES Entities : it considers items attached, either to a single level with a given value, or to a level list which contains this value |
| IGESSelect_SelectName | Selects Entities which have a given name. Consider Property Name if present, else Short Label, but not the Subscript Number First version : keeps exact name Later : regular expression |
| IGESSelect_SelectPCurves | This Selection returns the pcurves which lie on a face In two modes : global (i.e. a CompositeCurve is not explored) or basic (all the basic curves are listed) |
| IGESSelect_SelectSingleViewFrom | This selection gets the Single Views attached to its input IGES entities. Single Views themselves or Drawings as passed as such (Drawings, for their Annotations) |
| IGESSelect_SelectSubordinate | This selections uses Subordinate Status as sort criterium It is an integer number which can be : 0 Independant 1 Physically Dependant 2 Logically Dependant 3 Both (recorded) |
| IGESSelect_SelectVisibleStatus | This selection looks at Blank Status of IGES Entities Direct selection keeps Visible Entities (Blank = 0), Reverse selection keeps Blanked Entities (Blank = 1) |
| IGESSelect_SetGlobalParameter | Sets a Global (Header) Parameter to a new value, directly given Controls the form of the parameter (Integer, Real, String with such or such form), but not the consistence of the new value regarding the rest of the file |
| IGESSelect_SetLabel | Sets/Clears Short Label of Entities, those designated by the Selection. No Selection means all the file |
| IGESSelect_SetVersion5 | Sets IGES Version (coded in global parameter 23) to be at least IGES 5.1 . If it is older, it is set to IGES 5.1, and LastChangeDate (new Global n0 25) is added (current time) Else, it does nothing (i.e. changes neither IGES Version nor LastChangeDate) |
| IGESSelect_SignColor | Gives Color attached to an entity Several forms are possible, according to <mode> 1 : number : "Dnn" for entity, "Snn" for standard, "(none)" for 0 2 : name : Of standard color, or of the color entity, or "(none)" (if the color entity has no name, its label is taken) 3 : RGB values, form R:nn,G:nn,B:nn 4 : RED value : an integer 5 : GREEN value : an integer 6 : BLUE value : an integer Other computable values can be added if needed : CMY values, Percentages for Hue, Lightness, Saturation |
| IGESSelect_SignLevelNumber | Gives D.E. Level Number under two possible forms : |
| IGESSelect_SignStatus | Gives D.E. Status under the form i,j,k,l (4 figures) i for BlankStatus j for SubordinateStatus k for UseFlag l for Hierarchy |
| IGESSelect_SplineToBSpline | This type of Transformer allows to convert Spline Curves (IGES type 112) and Surfaces (IGES Type 126) to BSpline Curves (IGES type 114) and Surfac (IGES Type 128). All other entities are rebuilt as identical but on the basis of this conversion |
| IGESSelect_UpdateCreationDate | Allows to Change the Creation Date indication in the Header (Global Section) of IGES File. It is taken from the operating system (time of application of the Modifier). The Selection of the Modifier is not used : it simply acts as a criterium to select IGES Files to touch up |
| IGESSelect_UpdateFileName | Sets the File Name in Header to be the actual name of the file If new file name is unknown, the former one is kept Remark : this works well only when it is Applied and send time If it is run immediately, new file name is unknown and nothing is done The Selection of the Modifier is not used : it simply acts as a criterium to select IGES Files to touch up |
| IGESSelect_UpdateLastChange | Allows to Change the Last Change Date indication in the Header (Global Section) of IGES File. It is taken from the operating system (time of application of the Modifier). The Selection of the Modifier is not used : it simply acts as a criterium to select IGES Files to touch up. Remark : IGES Models noted as version before IGES 5.1 are in addition changed to 5.1 |
| IGESSelect_ViewSorter | Sorts IGES Entities on the views and drawings. In a first step, it splits a set of entities according the different views they are attached to. Then, packets according single views (+ drawing frames), or according drawings (which refer to the views) can be determined |
| IGESSelect_WorkLibrary | Performs Read and Write an IGES File with an IGES Model |
| IGESSolid | This package consists of B-Rep and CSG Solid entities |
| IGESSolid_Array1OfFace | |
| IGESSolid_Array1OfLoop | |
| IGESSolid_Array1OfShell | |
| IGESSolid_Array1OfVertexList | |
| IGESSolid_Block | Defines Block, Type <150> Form Number <0> in package IGESSolid The Block is a rectangular parallelopiped, defined with one vertex at (X1, Y1, Z1) and three edges lying along the local +X, +Y, +Z axes |
| IGESSolid_BooleanTree | Defines BooleanTree, Type <180> Form Number <0> in package IGESSolid The Boolean tree describes a binary tree structure composed of regularized Boolean operations and operands, in post-order notation |
| IGESSolid_ConeFrustum | Defines ConeFrustum, Type <156> Form Number <0> in package IGESSolid The Cone Frustum is defined by the center of the larger circular face of the frustum, its radius, a unit vector in the axis direction, a height in this direction and a second circular face with radius which is lesser than the first face |
| IGESSolid_ConicalSurface | Defines ConicalSurface, Type <194> Form Number <0,1> in package IGESSolid The right circular conical surface is defined by a point on the axis on the cone, the direction of the axis of the cone, the radius of the cone at the axis point and the cone semi-angle |
| IGESSolid_Cylinder | Defines Cylinder, Type <154> Form Number <0> in package IGESSolid This defines a solid cylinder |
| IGESSolid_CylindricalSurface | Defines CylindricalSurface, Type <192> Form Number <0,1> in package IGESSolid |
| IGESSolid_EdgeList | Defines EdgeList, Type <504> Form <1> in package IGESSolid EdgeList is defined as a segment joining two vertices It contains one or more edge tuples |
| IGESSolid_Ellipsoid | Defines Ellipsoid, Type <168> Form Number <0> in package IGESSolid The ellipsoid is a solid bounded by the surface defined by: X^2 Y^2 Z^2 --— + --— + --— = 1 LX^2 LY^2 LZ^2 |
| IGESSolid_Face | Defines Face, Type <510> Form Number <1> in package IGESSolid Face entity is a bound (partial) which has finite area |
| IGESSolid_GeneralModule | Definition of General Services for IGESSolid (specific part) This Services comprise : Shared & Implied Lists, Copy, Check |
| IGESSolid_HArray1OfFace | |
| IGESSolid_HArray1OfLoop | |
| IGESSolid_HArray1OfShell | |
| IGESSolid_HArray1OfVertexList | |
| IGESSolid_Loop | Defines Loop, Type <508> Form Number <1> in package IGESSolid A Loop entity specifies a bound of a face. It represents a connected collection of face boundaries, seams, and poles of a single face |
| IGESSolid_ManifoldSolid | Defines ManifoldSolid, Type <186> Form Number <0> in package IGESSolid A manifold solid is a bounded, closed, and finite volume in three dimensional Euclidean space |
| IGESSolid_PlaneSurface | Defines PlaneSurface, Type <190> Form Number <0,1> in package IGESSolid A plane surface entity is defined by a point on the surface and a normal to it |
| IGESSolid_Protocol | Description of Protocol for IGESSolid |
| IGESSolid_ReadWriteModule | Defines Solid File Access Module for IGESSolid (specific parts) Specific actions concern : Read and Write Own Parameters of an IGESEntity |
| IGESSolid_RightAngularWedge | Defines RightAngularWedge, Type <152> Form Number <0> in package IGESSolid A right angular wedge is a triangular/trapezoidal prism |
| IGESSolid_SelectedComponent | Defines SelectedComponent, Type <182> Form Number <0> in package IGESSolid The Selected Component entity provides a means of selecting one component of a disjoint CSG solid |
| IGESSolid_Shell | Defines Shell, Type <514> Form Number <1> in package IGESSolid Shell entity is a connected entity of dimensionality 2 which divides R3 into two arcwise connected open subsets, one of which is finite. Inside of the shell is defined to be the finite region. From IGES-5.3, Form can be <1> for Closed or <2> for Open |
| IGESSolid_SolidAssembly | Defines SolidAssembly, Type <184> Form <0> in package IGESSolid Solid assembly is a collection of items which possess a shared fixed geometric relationship |
| IGESSolid_SolidInstance | Defines SolidInstance, Type <430> Form Number <0> in package IGESSolid This provides a mechanism for replicating a solid representation |
| IGESSolid_SolidOfLinearExtrusion | Defines SolidOfLinearExtrusion, Type <164> Form Number <0> in package IGESSolid Solid of linear extrusion is defined by translatin an area determined by a planar curve |
| IGESSolid_SolidOfRevolution | Defines SolidOfRevolution, Type <162> Form Number <0,1> in package IGESSolid This entity is defined by revolving the area determined by a planar curve about a specified axis through a given fraction of full rotation |
| IGESSolid_SpecificModule | Defines Services attached to IGES Entities : Dump, for IGESSolid |
| IGESSolid_Sphere | Defines Sphere, Type <158> Form Number <0> in package IGESSolid This defines a sphere with a center and radius |
| IGESSolid_SphericalSurface | Defines SphericalSurface, Type <196> Form Number <0,1> in package IGESSolid Spherical surface is defined by a center and radius. In case of parametrised surface an axis and a reference direction is provided |
| IGESSolid_ToolBlock | Tool to work on a Block. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolBooleanTree | Tool to work on a BooleanTree. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolConeFrustum | Tool to work on a ConeFrustum. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolConicalSurface | Tool to work on a ConicalSurface. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolCylinder | Tool to work on a Cylinder. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolCylindricalSurface | Tool to work on a CylindricalSurface. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolEdgeList | Tool to work on a EdgeList. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolEllipsoid | Tool to work on a Ellipsoid. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolFace | Tool to work on a Face. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolLoop | Tool to work on a Loop. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolManifoldSolid | Tool to work on a ManifoldSolid. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolPlaneSurface | Tool to work on a PlaneSurface. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolRightAngularWedge | Tool to work on a RightAngularWedge. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolSelectedComponent | Tool to work on a SelectedComponent. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolShell | Tool to work on a Shell. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolSolidAssembly | Tool to work on a SolidAssembly. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolSolidInstance | Tool to work on a SolidInstance. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolSolidOfLinearExtrusion | Tool to work on a SolidOfLinearExtrusion. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolSolidOfRevolution | Tool to work on a SolidOfRevolution. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolSphere | Tool to work on a Sphere. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolSphericalSurface | Tool to work on a SphericalSurface. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolToroidalSurface | Tool to work on a ToroidalSurface. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolTorus | Tool to work on a Torus. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_ToolVertexList | Tool to work on a VertexList. Called by various Modules (ReadWriteModule, GeneralModule, SpecificModule) |
| IGESSolid_TopoBuilder | This class manages the creation of an IGES Topologic entity (BREP : ManifoldSolid, Shell, Face) This includes definiting of Vertex and Edge Lists, building of Edges and Loops |
| IGESSolid_ToroidalSurface | Defines ToroidalSurface, Type <198> Form Number <0,1> in package IGESSolid This entity is defined by the center point, the axis direction and the major and minor radii. In case of parametrised surface a reference direction is provided |
| IGESSolid_Torus | Defines Torus, Type <160> Form Number <0> in package IGESSolid A Torus is a solid formed by revolving a circular disc about a specified coplanar axis |
| IGESSolid_VertexList | Defines VertexList, Type <502> Form Number <1> in package IGESSolid A vertex is a point in R3. A vertex is the bound of an edge and can participate in the bounds of a face. It contains one or more vertices |
| IGESToBRep | Provides tools in order to transfer IGES entities to CAS.CADE |
| IGESToBRep_Actor | This class performs the transfer of an Entity from IGESToBRep |
| IGESToBRep_AlgoContainer | |
| IGESToBRep_BasicCurve | Provides methods to transfer basic geometric curves entities from IGES to CASCADE. These can be : |
| IGESToBRep_BasicSurface | Provides methods to transfer basic geometric surface entities from IGES to CASCADE. These can be : |
| IGESToBRep_BRepEntity | Provides methods to transfer BRep entities ( VertexList 502, EdgeList 504, Loop 508, Face 510, Shell 514, ManifoldSolid 186) from IGES to CASCADE |
| IGESToBRep_CurveAndSurface | Provides methods to transfer CurveAndSurface from IGES to CASCADE |
| IGESToBRep_IGESBoundary | This class is intended to translate IGES boundary entity (142-CurveOnSurface, 141-Boundary or 508-Loop) into the wire. Methods Transfer are virtual and are redefined in Advanced Data Exchange to optimize the translation and take into account advanced parameters |
| IGESToBRep_Reader | A simple way to read geometric IGES data. Encapsulates reading file and calling transfer tools |
| IGESToBRep_ToolContainer | |
| IGESToBRep_TopoCurve | Provides methods to transfer topologic curves entities from IGES to CASCADE |
| IGESToBRep_TopoSurface | Provides methods to transfer topologic surfaces entities from IGES to CASCADE |
| Image_AlienPixMap | Image class that support file reading/writing operations using auxiliary image library. Supported image formats: |
| Image_ColorBGR | POD structure for packed BGR color value (3 bytes) |
| Image_ColorBGR32 | POD structure for packed BGR color value (4 bytes with extra byte for alignment) |
| Image_ColorBGRA | POD structure for packed BGRA color value (4 bytes) |
| Image_ColorBGRAF | POD structure for packed float BGRA color value (4 floats) |
| Image_ColorBGRF | POD structure for packed BGR float color value (3 floats) |
| Image_ColorRGB | POD structure for packed RGB color value (3 bytes) |
| Image_ColorRGB32 | POD structure for packed RGB color value (4 bytes with extra byte for alignment) |
| Image_ColorRGBA | POD structure for packed RGBA color value (4 bytes) |
| Image_ColorRGBAF | POD structure for packed RGBA color value (4 floats) |
| Image_ColorRGBF | POD structure for packed float RGB color value (3 floats) |
| Image_Diff | This class compares two images pixel-by-pixel. It uses the following methods to ignore the difference between images: |
| Image_PixMap | Class represents packed image plane |
| Image_PixMapData | Structure to manage image buffer |
| inlist | |
| IntAna2d_AnaIntersection | Implementation of the analytical intersection between: |
| IntAna2d_Conic | Definition of a conic by its implicit quadaratic equation: A.X**2 + B.Y**2 + 2.C.X*Y + 2.D.X + 2.E.Y + F = 0 |
| IntAna2d_IntPoint | Geometrical intersection between two 2d elements |
| IntAna_Curve | Definition of a parametric Curve which is the result of the intersection between two quadrics |
| IntAna_Int3Pln | Intersection between 3 planes. The algorithm searches for an intersection point. If two of the planes are parallel or identical, IsEmpty returns TRUE |
| IntAna_IntConicQuad | This class provides the analytic intersection between a conic defined as an element of gp (Lin,Circ,Elips, Parab,Hypr) and a quadric as defined in the class Quadric from IntAna. The intersection between a conic and a plane is treated as a special case |
| IntAna_IntLinTorus | Intersection between a line and a torus |
| IntAna_IntQuadQuad | This class provides the analytic intersection between a cylinder or a cone from gp and another quadric, as defined in the class Quadric from IntAna. This algorithm is used when the geometric intersection (class QuadQuadGeo from IntAna) returns no geometric solution. The result of the intersection may be |
| IntAna_ListIteratorOfListOfCurve | |
| IntAna_ListNodeOfListOfCurve | |
| IntAna_ListOfCurve | |
| IntAna_QuadQuadGeo | Geometric intersections between two natural quadrics (Sphere , Cylinder , Cone , Pln from gp). The possible intersections are : |
| IntAna_Quadric | This class provides a description of Quadrics by their Coefficients in natural coordinate system |
| IntCurve_IConicTool | Implementation of the ImpTool from IntImpParGen for conics of gp |
| IntCurve_IntConicConic | Provides methods to intersect two conics. The exception ConstructionError is raised in constructors or in Perform methods when a domain (Domain from IntRes2d) is not correct, i-e when a Circle (Circ2d from gp) or an Ellipse (i-e Elips2d from gp) do not have a closed domain (use the SetEquivalentParameters method for a domain on a circle or an ellipse) |
| IntCurve_IntImpConicParConic | |
| IntCurve_MyImpParToolOfIntImpConicParConic | |
| IntCurve_PConic | This class represents a conic from gp as a parametric curve ( in order to be used by the class PConicTool from IntCurve) |
| IntCurve_PConicTool | Implementation of the ParTool from IntImpParGen for conics of gp, using the class PConic from IntCurve |
| IntCurve_ProjectOnPConicTool | This class provides a tool which computes the parameter of a point near a parametric conic |
| IntCurvesFace_Intersector | |
| IntCurvesFace_ShapeIntersector | |
| IntCurveSurface_HInter | |
| IntCurveSurface_Intersection | |
| IntCurveSurface_IntersectionPoint | Definition of an interserction point between a curve and a surface |
| IntCurveSurface_IntersectionSegment | A IntersectionSegment describes a segment of curve (w1,w2) where distance(C(w),Surface) is less than a given tolerances |
| IntCurveSurface_SequenceNodeOfSequenceOfPnt | |
| IntCurveSurface_SequenceNodeOfSequenceOfSeg | |
| IntCurveSurface_SequenceOfPnt | |
| IntCurveSurface_SequenceOfSeg | |
| IntCurveSurface_TheCSFunctionOfHInter | |
| IntCurveSurface_TheExactHInter | |
| IntCurveSurface_TheHCurveTool | |
| IntCurveSurface_TheInterferenceOfHInter | |
| IntCurveSurface_ThePolygonOfHInter | |
| IntCurveSurface_ThePolygonToolOfHInter | |
| IntCurveSurface_ThePolyhedronOfHInter | |
| IntCurveSurface_ThePolyhedronToolOfHInter | |
| IntCurveSurface_TheQuadCurvExactHInter | |
| IntCurveSurface_TheQuadCurvFuncOfTheQuadCurvExactHInter | |
| Interface_Array1OfFileParameter | |
| Interface_Array1OfHAsciiString | |
| Interface_BitMap | A bit map simply allows to associate a boolean flag to each item of a list, such as a list of entities, etc... numbered between 1 and a positive count nbitems |
| Interface_Category | This class manages categories A category is defined by a name and a number, and can be seen as a way of rough classification, i.e. less precise than a cdl type. Hence, it is possible to dispatch every entity in about a dozen of categories, twenty is a reasonable maximum |
| Interface_Check | Defines a Check, as a list of Fail or Warning Messages under a literal form, which can be empty. A Check can also bring an Entity, which is the Entity to which the messages apply (this Entity may be any Transient Object) |
| Interface_CheckIterator | Result of a Check operation (especially from InterfaceModel) |
| Interface_CheckTool | Performs Checks on Entities, using General Service Library and Modules to work. Works on one Entity or on a complete Model |
| Interface_CopyControl | This deferred class describes the services required by CopyTool to work. They are very simple and correspond basically to the management of an indexed map. But they can be provided by various classes which can control a Transfer. Each Starting Entity have at most one Result (Mapping one-one) |
| Interface_CopyMap | Manages a Map for the need of single Transfers, such as Copies In such transfer, Starting Entities are read from a unique Starting Model, and each transferred Entity is bound to one and only one Result, which cannot be changed later |
| Interface_CopyTool | Performs Deep Copies of sets of Entities Allows to perform Copy of Interface Entities from a Model to another one. Works by calling general services GetFromAnother and GetImplied. Uses a CopyMap to bind a unique Result to each Copied Entity |
| Interface_DataMapIteratorOfDataMapOfTransientInteger | |
| Interface_DataMapNodeOfDataMapOfTransientInteger | |
| Interface_DataMapOfTransientInteger | |
| Interface_EntityCluster | Auxiliary class for EntityList. An EntityList designates an EntityCluster, which brings itself an fixed maximum count of Entities. If it is full, it gives access to another cluster ("Next"). This class is intended to give a good compromise between access time (faster than a Sequence, good for little count) and memory use (better than a Sequence in any case, overall for little count, better than an Array for a very little count. It is designed for a light management. Remark that a new Item may not be Null, because this is the criterium used for "End of List" |
| Interface_EntityIterator | Defines an Iterator on Entities. Allows considering of various criteria |
| Interface_EntityList | This class defines a list of Entities (Transient Objects), it can be used as a field of other Transient classes, with these features : |
| Interface_FileParameter | Auxiliary class to store a litteral parameter in a file intermediate directory or in an UndefinedContent : a reference type Parameter detains an Integer which is used to address a record in the directory. FileParameter is intended to be stored in a ParamSet : hence memory management is performed by ParamSet, which calls Clear to work, while the Destructor (see Destroy) does nothing. Also a FileParameter can be read for consultation only, not to be read from a Structure to be included into another one |
| Interface_FileReaderData | This class defines services which permit to access Data issued from a File, in a form which does not depend of physical format : thus, each Record has an attached ParamList (to be managed) and resulting Entity |
| Interface_FileReaderTool | Defines services which are required to load an InterfaceModel from a File. Typically, it may firstly transform a system file into a FileReaderData object, then work on it, not longer considering file contents, to load an Interface Model. It may also work on a FileReaderData already loaded |
| Interface_FloatWriter | This class converts a floting number (Real) to a string It can be used if the standard C-C++ output functions (sprintf or cout<<) are not convenient. That is to say : |
| Interface_GeneralLib | |
| Interface_GeneralModule | This class defines general services, which must be provided for each type of Entity (i.e. of Transient Object processed by an Interface) : Shared List, Check, Copy, Delete, Category |
| Interface_GlobalNodeOfGeneralLib | |
| Interface_GlobalNodeOfReaderLib | |
| Interface_Graph | Gives basic data structure for operating and storing graph results (usage is normally internal) Entities are Mapped according their Number in the Model |
| Interface_GraphContent | Defines general form for classes of graph algorithms on Interfaces, this form is that of EntityIterator Each sub-class fills it according to its own algorithm This also allows to combine any graph result to others, all being given under one unique form |
| Interface_GTool | GTool - General Tool for a Model Provides the functions performed by Protocol/GeneralModule for entities of a Model, and recorded in a GeneralLib Optimized : once an entity has been queried, the GeneralLib is not longer queried Shareable between several users : as a Handle |
| Interface_HArray1OfHAsciiString | |
| Interface_HGraph | This class allows to store a redefinable Graph, via a Handle (usefull for an Object which can work on several successive Models, with the same general conditions) |
| Interface_HSequenceOfCheck | |
| Interface_IndexedMapNodeOfIndexedMapOfAsciiString | |
| Interface_IndexedMapOfAsciiString | |
| Interface_InterfaceModel | Defines an (Indexed) Set of data corresponding to a complete Transfer by a File Interface, i.e. File Header and Transient Entities (Objects) contained in a File. Contained Entities are identified in the Model by unique and consecutive Numbers |
| Interface_IntList | This class detains the data which describe a Graph. A Graph has two lists, one for shared refs, one for sharing refs (the reverses). Each list comprises, for each Entity of the Model of the Graph, a list of Entities (shared or sharing). In fact, entities are identified by their numbers in the Model or Graph : this gives better performances |
| Interface_IntVal | An Integer through a Handle (i.e. managed as TShared) |
| Interface_LineBuffer | Simple Management of a Line Buffer, to be used by Interface File Writers. While a String is suitable to do that, this class ensures an optimised Memory Management, because this is a hard point of File Writing |
| Interface_MapAsciiStringHasher | |
| Interface_MSG | This class gives a set of functions to manage and use a list of translated messages (messagery) |
| Interface_NodeOfGeneralLib | |
| Interface_NodeOfReaderLib | |
| Interface_ParamList | |
| Interface_ParamSet | Defines an ordered set of FileParameters, in a way to be efficient as in memory requirement or in speed |
| Interface_Protocol | General description of Interface Protocols. A Protocol defines a set of Entity types. This class provides also the notion of Active Protocol, as a working context, defined once then exploited by various Tools and Libraries |
| Interface_ReaderLib | |
| Interface_ReaderModule | Defines unitary operations required to read an Entity from a File (see FileReaderData, FileReaderTool), under control of a FileReaderTool. The initial creation is performed by a GeneralModule (set in GeneralLib). Then, which remains is Loading data from the FileReaderData to the Entity |
| Interface_ReportEntity | A ReportEntity is produced to aknowledge and memorize the binding between a Check and an Entity. The Check can bring Fails (+ Warnings if any), or only Warnings. If it is empty, the Report Entity is for an Unknown Entity |
| Interface_SequenceNodeOfSequenceOfCheck | |
| Interface_SequenceOfCheck | |
| Interface_ShareFlags | This class only says for each Entity of a Model, if it is Shared or not by one or more other(s) of this Model It uses the General Service "Shared" |
| Interface_ShareTool | Builds the Graph of Dependancies, from the General Service "Shared" -> builds for each Entity of a Model, the Shared and Sharing Lists, and gives access to them. Allows to complete with Implied References (which are not regarded as Shared Entities, but are nevertheless Referenced), this can be usefull for Reference Checking |
| Interface_SignLabel | Signature to give the Label from the Model |
| Interface_SignType | Provides the basic service to get a type name, according to a norm It can be used for other classes (general signatures ...) |
| Interface_STAT | This class manages statistics to be queried asynchronously. Way of use : An operator describes a STAT form then fills it according to its progression. This produces a state of advancement of the process. This state can then be queried asynchronously : typically it is summarised as a percentage. There are also an identification of the current state, and informations on processed volume |
| Interface_Static | This class gives a way to manage meaningfull static variables, used as "global" parameters in various procedures |
| Interface_TypedValue | Now strictly equivalent to TypedValue from MoniTool, except for ParamType which remains for compatibility reasons |
| Interface_UndefinedContent | Defines resources for an "Undefined Entity" : such an Entity is used to describe an Entity which complies with the Norm, but of an Unknown Type : hence it is kept under a literal form (avoiding to loose data). UndefinedContent offers a way to store a list of Parameters, as literals or references to other Entities |
| Interval | |
| Intf | Interference computation between polygons, lines and polyhedra with only triangular facets. These objects are polygonal representations of complex curves and triangulated representations of complex surfaces |
| Intf_Array1OfLin | |
| Intf_Interference | Describes the Interference computation result between polygon2d or polygon3d or polyhedron (as three sequences of points of intersection, polylines of intersection and zones de tangence) |
| Intf_InterferencePolygon2d | Computes the interference between two polygons or the self intersection of a polygon in two dimensions |
| Intf_Polygon2d | Describes the necessary polygon information to compute the interferences |
| Intf_SectionLine | Describe a polyline of intersection between two polyhedra as a sequence of points of intersection |
| Intf_SectionPoint | Describes an intersection point between polygons and polyedra |
| Intf_SeqOfSectionLine | |
| Intf_SeqOfSectionPoint | |
| Intf_SeqOfTangentZone | |
| Intf_SequenceNodeOfSeqOfSectionLine | |
| Intf_SequenceNodeOfSeqOfSectionPoint | |
| Intf_SequenceNodeOfSeqOfTangentZone | |
| Intf_TangentZone | Describes a zone of tangence between polygons or polyhedra as a sequence of points of intersection |
| Intf_Tool | Provides services to create box for infinites lines in a given contexte |
| IntImpParGen | Gives a generic algorithm to intersect Implicit Curves and Bounded Parametric Curves |
| IntImpParGen_ImpTool | Template class for an implicit curve |
| IntPatch_ALine | Implementation of an intersection line described by a parametrised curve |
| IntPatch_ALineToWLine | |
| IntPatch_ArcFunction | |
| IntPatch_CSFunction | This function is associated to the intersection between a curve on surface and a surface |
| IntPatch_CurvIntSurf | |
| IntPatch_GLine | Implementation of an intersection line represented by a conic |
| IntPatch_HCurve2dTool | |
| IntPatch_HInterTool | Tool for the intersection between 2 surfaces. Regroupe pour l instant les methodes hors Adaptor3d.. |
| IntPatch_ImpImpIntersection | Implementation of the intersection between two quadric patches : Plane, Cone, Cylinder or Sphere |
| IntPatch_ImpPrmIntersection | Implementation of the intersection between a natural quadric patch : Plane, Cone, Cylinder or Sphere and a bi-parametrised surface |
| IntPatch_InterferencePolyhedron | Computes the interference between two polyhedra or the self interference of a polyhedron. Points of intersection, polylines of intersection and zones of tangence |
| IntPatch_Intersection | This class provides a generic algorithm to intersect 2 surfaces |
| IntPatch_Line | Definition of an intersection line between two surfaces. A line may be either geometric : line, circle, ellipse, parabola, hyperbola, as defined in the class GLine, or analytic, as defined in the class ALine, or defined by a set of points (coming from a walking algorithm) as defined in the class WLine |
| IntPatch_LineConstructor | The intersections algorithms compute the intersection on two surfaces and return the intersections lines as IntPatch_Line |
| IntPatch_Point | Definition of an intersection point between two surfaces. Such a point is contains geometrical informations (see the Value method) and logical informations |
| IntPatch_PointLine | Definition of an intersection line between two surfaces. A line defined by a set of points (e.g. coming from a walking algorithm) as defined in the class WLine or RLine (Restriction line) |
| IntPatch_PolyArc | |
| IntPatch_Polygo | |
| IntPatch_Polyhedron | This class provides a linear approximation of the PSurface. preview a constructor on a zone of a surface |
| IntPatch_PolyhedronTool | Describe the signature of a polyedral surface with only triangular facets and the necessary informations to compute the interferences |
| IntPatch_PolyLine | |
| IntPatch_PrmPrmIntersection | Implementation of the Intersection between two bi-parametrised surfaces |
| IntPatch_PrmPrmIntersection_T3Bits | |
| IntPatch_RLine | Implementation of an intersection line described by a restriction line on one of the surfaces |
| IntPatch_RstInt | Trouver les points d intersection entre la ligne de cheminement et les arcs de restriction |
| IntPatch_SequenceNodeOfSequenceOfIWLineOfTheIWalking | |
| IntPatch_SequenceNodeOfSequenceOfLine | |
| IntPatch_SequenceNodeOfSequenceOfPathPointOfTheSOnBounds | |
| IntPatch_SequenceNodeOfSequenceOfPoint | |
| IntPatch_SequenceNodeOfSequenceOfSegmentOfTheSOnBounds | |
| IntPatch_SequenceOfIWLineOfTheIWalking | |
| IntPatch_SequenceOfLine | |
| IntPatch_SequenceOfPathPointOfTheSOnBounds | |
| IntPatch_SequenceOfPoint | |
| IntPatch_SequenceOfSegmentOfTheSOnBounds | |
| IntPatch_TheIWalking | |
| IntPatch_TheIWLineOfTheIWalking | |
| IntPatch_ThePathPointOfTheSOnBounds | |
| IntPatch_TheSearchInside | |
| IntPatch_TheSegmentOfTheSOnBounds | |
| IntPatch_TheSOnBounds | |
| IntPatch_TheSurfFunction | |
| IntPatch_WLine | Definition of set of points as a result of the intersection between 2 parametrised patches |
| IntPolyh_Array | |
| IntPolyh_Couple | Couple of triangles |
| IntPolyh_Edge | |
| IntPolyh_Intersection | Main algorithm. Algorythm outputs are lines and points like discribe in the last paragraph. The Algorythm provides direct acces to the elements of those lines and points. Other classes of this package are for internal use and only concern the algorithmic part |
| IntPolyh_MaillageAffinage | Provide the algorythms used in the package |
| IntPolyh_Point | |
| IntPolyh_SectionLine | |
| IntPolyh_SeqOfStartPoints | |
| IntPolyh_SequenceNodeOfSeqOfStartPoints | |
| IntPolyh_StartPoint | |
| IntPolyh_Triangle | |
| IntRes2d_Domain | Definition of the domain of parameter on a 2d-curve. Most of the time, a domain is defined by two extremities. An extremity is made of : |
| IntRes2d_Intersection | Defines the root class of all the Intersections between two 2D-Curves, and provides all the methods about the results of the Intersections Algorithms |
| IntRes2d_IntersectionPoint | Definition of an intersection point between two 2D curves |
| IntRes2d_IntersectionSegment | Definition of an intersection curve between two 2D curves |
| IntRes2d_SequenceNodeOfSequenceOfIntersectionPoint | |
| IntRes2d_SequenceNodeOfSequenceOfIntersectionSegment | |
| IntRes2d_SequenceOfIntersectionPoint | |
| IntRes2d_SequenceOfIntersectionSegment | |
| IntRes2d_Transition | Definition of the type of transition near an intersection point between two curves. The transition is either a "true transition", which means that one of the curves goes inside or outside the area defined by the other curve near the intersection, or a "touch transition" which means that the first curve does not cross the other one, or an "undecided" transition, which means that the curves are superposed |
| Intrv_Interval | **--------—**** Other ***—* IsBefore ***-------—* IsJustBefore ***------------—* IsOverlappingAtStart ***---------------------—* IsJustEnclosingAtEnd ***--------------------------------—* IsEnclosing ***-—* IsJustOverlappingAtStart ***----------—* IsSimilar ***---------------------—* IsJustEnclosingAtStart ***-* IsInside ***---—* IsJustOverlappingAtEnd ***--------------—* IsOverlappingAtEnd ***-----—* IsJustAfter ***—* IsAfter |
| Intrv_Intervals | The class Intervals is a sorted sequence of non overlapping Real Intervals |
| Intrv_SequenceNodeOfSequenceOfInterval | |
| Intrv_SequenceOfInterval | |
| IntStart_SITopolTool | Template class for a topological tool. This tool is linked with the surface on which the classification has to be made |
| IntSurf | This package provides resources for all the packages concerning the intersection between surfaces |
| IntSurf_Couple | Creation d 'un couple de 2 entiers |
| IntSurf_InteriorPoint | Definition of a point solution of the intersection between an implicit an a parametrised surface. These points are passing points on the intersection lines, or starting points for the closed lines on the parametrised surface |
| IntSurf_InteriorPointTool | This class provides a tool on the "interior point" that can be used to instantiates the Walking algorithmes (see package IntWalk) |
| IntSurf_LineOn2S | |
| IntSurf_ListIteratorOfListOfPntOn2S | |
| IntSurf_ListNodeOfListOfPntOn2S | |
| IntSurf_ListOfPntOn2S | |
| IntSurf_PathPoint | |
| IntSurf_PathPointTool | |
| IntSurf_PntOn2S | This class defines the geometric informations for an intersection point between 2 surfaces : The coordinates ( Pnt from gp ), and two parametric coordinates |
| IntSurf_Quadric | |
| IntSurf_QuadricTool | This class provides a tool on a quadric that can be used to instantiates the Walking algorithmes (see package IntWalk) with a Quadric from IntSurf as implicit surface |
| IntSurf_SequenceNodeOfSequenceOfCouple | |
| IntSurf_SequenceNodeOfSequenceOfInteriorPoint | |
| IntSurf_SequenceNodeOfSequenceOfPathPoint | |
| IntSurf_SequenceOfCouple | |
| IntSurf_SequenceOfInteriorPoint | |
| IntSurf_SequenceOfPathPoint | |
| IntSurf_Transition | Definition of the transition at the intersection between an intersection line and a restriction curve on a surface |
| IntTools | Contains classes for intersection and classification purposes and accompanying classes |
| IntTools_Array1OfRange | |
| IntTools_Array1OfRoots | |
| IntTools_BaseRangeSample | Base class for range index management |
| IntTools_BeanFaceIntersector | The class BeanFaceIntersector computes ranges of parameters on the curve of a bean(part of edge) that bound the parts of bean which are on the surface of a face according to edge and face tolerances. Warning: The real boundaries of the face are not taken into account, Most of the result parts of the bean lays only inside the region of the surface, which includes the inside of the face. And the parts which are out of this region can be excluded from the result |
| IntTools_CArray1OfInteger | |
| IntTools_CArray1OfReal | |
| IntTools_CommonPrt | The class is to describe a common part between two edges in 3-d space |
| IntTools_Compare | Auxiliary class to provide a sorting Roots |
| IntTools_CompareRange | Auxiliary class to provide a sorting Ranges, taking into account a value of Left |
| IntTools_Context | The intersection Context contains geometrical and topological toolkit (classifiers, projectors, etc). The intersection Context is for caching the tools to increase the performance |
| IntTools_Curve | Class is a container of one 3d curve two 2d curves |
| IntTools_CurveRangeLocalizeData | |
| IntTools_CurveRangeSample | Class for range index management of curve |
| IntTools_CurveRangeSampleMapHasher | Class for range index management of curve |
| IntTools_DataMapIteratorOfDataMapOfCurveSampleBox | |
| IntTools_DataMapIteratorOfDataMapOfSurfaceSampleBox | |
| IntTools_DataMapNodeOfDataMapOfCurveSampleBox | |
| IntTools_DataMapNodeOfDataMapOfSurfaceSampleBox | |
| IntTools_DataMapOfCurveSampleBox | |
| IntTools_DataMapOfSurfaceSampleBox | |
| IntTools_EdgeEdge | The class provides Edge/Edge intersection algorithm based on the intersection between edges bounding boxes |
| IntTools_EdgeFace | The class provides Edge/Face algorithm to determine common parts between edge and face in 3-d space. Common parts can be : Vertices or Edges |
| IntTools_FaceFace | This class provides the intersection of face's underlying surfaces |
| IntTools_FClass2d | Class provides an algorithm to classify a 2d Point in 2d space of face using boundaries of the face |
| IntTools_IndexedDataMapNodeOfIndexedDataMapOfTransientAddress | |
| IntTools_IndexedDataMapOfTransientAddress | |
| IntTools_ListIteratorOfListOfBox | |
| IntTools_ListIteratorOfListOfCurveRangeSample | |
| IntTools_ListIteratorOfListOfSurfaceRangeSample | |
| IntTools_ListNodeOfListOfBox | |
| IntTools_ListNodeOfListOfCurveRangeSample | |
| IntTools_ListNodeOfListOfSurfaceRangeSample | |
| IntTools_ListOfBox | |
| IntTools_ListOfCurveRangeSample | |
| IntTools_ListOfSurfaceRangeSample | |
| IntTools_MapIteratorOfMapOfCurveSample | |
| IntTools_MapIteratorOfMapOfSurfaceSample | |
| IntTools_MapOfCurveSample | |
| IntTools_MapOfSurfaceSample | |
| IntTools_MarkedRangeSet | Class MarkedRangeSet provides continuous set of ranges marked with flags |
| IntTools_PntOn2Faces | Contains two points PntOnFace from IntTools and a flag |
| IntTools_PntOnFace | Contains a Face, a 3d point, corresponded UV parameters and a flag |
| IntTools_QuickSort | |
| IntTools_QuickSortRange | |
| IntTools_Range | The class describes the 1-d range [myFirst, myLast] |
| IntTools_Root | The class is to describe the root of function of one variable for Edge/Edge and Edge/Surface algorithms |
| IntTools_SequenceNodeOfSequenceOfCommonPrts | |
| IntTools_SequenceNodeOfSequenceOfCurves | |
| IntTools_SequenceNodeOfSequenceOfPntOn2Faces | |
| IntTools_SequenceNodeOfSequenceOfRanges | |
| IntTools_SequenceNodeOfSequenceOfRoots | |
| IntTools_SequenceOfCommonPrts | |
| IntTools_SequenceOfCurves | |
| IntTools_SequenceOfPntOn2Faces | |
| IntTools_SequenceOfRanges | |
| IntTools_SequenceOfRoots | |
| IntTools_ShrunkRange | The class provides the computation of a working (shrunk) range [t1, t2] for the 3D-curve of the edge |
| IntTools_StdMapNodeOfMapOfCurveSample | |
| IntTools_StdMapNodeOfMapOfSurfaceSample | |
| IntTools_SurfaceRangeLocalizeData | |
| IntTools_SurfaceRangeSample | Class for range index management of surface |
| IntTools_SurfaceRangeSampleMapHasher | |
| IntTools_Tools | The class contains handy static functions dealing with the geometry and topology |
| IntTools_TopolTool | Class redefine methods of TopolTool from Adaptor3d concerning sample points |
| IntWalk_PWalking | This class implements an algorithm to determine the intersection between 2 parametrized surfaces, marching from a starting point. The intersection line starts and ends on the natural surface's boundaries |
| IntWalk_TheFunctionOfTheInt2S | |
| IntWalk_TheInt2S | |
| IntWalk_WalkingData | |
| iXYZ | |
| Law | Multiple services concerning 1d functions |
| Law_BSpFunc | Law Function based on a BSpline curve 1d. Package methods and classes are implemented in package Law to construct the basis curve with several constraints |
| Law_BSpline | Definition of the 1D B_spline curve |
| Law_BSplineKnotSplitting | For a B-spline curve the discontinuities are localised at the knot values and between two knots values the B-spline is infinitely continuously differentiable. At a knot of range index the continuity is equal to : Degree - Mult (Index) where Degree is the degree of the basis B-spline functions and Mult the multiplicity of the knot of range Index. If for your computation you need to have B-spline curves with a minima of continuity it can be interesting to know between which knot values, a B-spline curve arc, has a continuity of given order. This algorithm computes the indexes of the knots where you should split the curve, to obtain arcs with a constant continuity given at the construction time. The splitting values are in the range [FirstUKnotValue, LastUKnotValue] (See class B-spline curve from package Geom). If you just want to compute the local derivatives on the curve you don't need to create the B-spline curve arcs, you can use the functions LocalD1, LocalD2, LocalD3, LocalDN of the class BSplineCurve |
| Law_Composite | Loi composite constituee d une liste de lois de ranges consecutifs. Cette implementation un peu lourde permet de reunir en une seule loi des portions de loi construites de facon independantes (par exemple en interactif) et de lancer le walking d un coup a l echelle d une ElSpine. CET OBJET REPOND DONC A UN PROBLEME D IMPLEMENTATION SPECIFIQUE AUX CONGES!!! |
| Law_Constant | Loi constante |
| Law_Function | Root class for evolution laws |
| Law_Interpol | Provides an evolution law that interpolates a set of parameter and value pairs (wi, radi) |
| Law_Interpolate | This class is used to interpolate a BsplineCurve passing through an array of points, with a C2 Continuity if tangency is not requested at the point. If tangency is requested at the point the continuity will be C1. If Perodicity is requested the curve will be closed and the junction will be the first point given. The curve will than be only C1 |
| Law_Laws | |
| Law_Linear | Describes an linear evolution law |
| Law_ListIteratorOfLaws | |
| Law_ListNodeOfLaws | |
| Law_S | Describes an "S" evolution law |
| LDOM_Attr | |
| LDOM_BasicAttribute | |
| LDOM_BasicElement | |
| LDOM_BasicNode | |
| LDOM_BasicText | |
| LDOM_CDATASection | |
| LDOM_CharacterData | |
| LDOM_CharReference | |
| LDOM_Comment | |
| LDOM_Document | |
| LDOM_DocumentType | |
| LDOM_Element | |
| LDOM_LDOMImplementation | |
| LDOM_MemManager | |
| LDOM_Node | |
| LDOM_NodeList | |
| LDOM_OSStream | |
| LDOM_SBuffer | |
| LDOM_Text | |
| LDOM_XmlReader | |
| LDOM_XmlWriter | |
| limit | |
| limit3 | |
| LocalAnalysis | This package gives tools to check the local continuity between two points situated on two curves or two surfaces |
| LocalAnalysis_CurveContinuity | This class gives tools to check local continuity C0 C1 C2 G1 G2 between two points situated on two curves |
| LocalAnalysis_SurfaceContinuity | This class gives tools to check local continuity C0 C1 C2 G1 G2 between two points situated on two surfaces |
| LocOpe | Provides tools to implement local topological operations on a shape |
| LocOpe_BuildShape | |
| LocOpe_BuildWires | |
| LocOpe_CSIntersector | This class provides the intersection between a set of axis or a circle and the faces of a shape. The intersection points are sorted in increasing parameter along each axis or circle |
| LocOpe_CurveShapeIntersector | This class provides the intersection between an axis or a circle and the faces of a shape. The intersection points are sorted in increasing parameter along the axis |
| LocOpe_DataMapIteratorOfDataMapOfShapePnt | |
| LocOpe_DataMapNodeOfDataMapOfShapePnt | |
| LocOpe_DataMapOfShapePnt | |
| LocOpe_DPrism | Defines a pipe (near from Pipe from BRepFill), with modifications provided for the Pipe feature |
| LocOpe_FindEdges | |
| LocOpe_FindEdgesInFace | |
| LocOpe_GeneratedShape | |
| LocOpe_Generator | |
| LocOpe_GluedShape | |
| LocOpe_Gluer | |
| LocOpe_HBuilder | |
| LocOpe_LinearForm | Defines a linear form (using Prism from BRepSweep) with modifications provided for the LinearForm feature |
| LocOpe_Pipe | Defines a pipe (near from Pipe from BRepFill), with modifications provided for the Pipe feature |
| LocOpe_PntFace | |
| LocOpe_Prism | Defines a prism (using Prism from BRepSweep) with modifications provided for the Prism feature |
| LocOpe_Revol | Defines a prism (using Prism from BRepSweep) with modifications provided for the Prism feature |
| LocOpe_RevolutionForm | Defines a revolution form (using Revol from BRepSweep) with modifications provided for the RevolutionForm feature |
| LocOpe_SequenceNodeOfSequenceOfCirc | |
| LocOpe_SequenceNodeOfSequenceOfLin | |
| LocOpe_SequenceNodeOfSequenceOfPntFace | |
| LocOpe_SequenceOfCirc | |
| LocOpe_SequenceOfLin | |
| LocOpe_SequenceOfPntFace | |
| LocOpe_SplitDrafts | This class provides a tool to realize the following operations on a shape : |
| LocOpe_Spliter | |
| LocOpe_SplitShape | Provides a tool to cut : |
| LocOpe_WiresOnShape | |
| LProp3d_CLProps | |
| LProp3d_CurveTool | |
| LProp3d_SLProps | |
| LProp3d_SurfaceTool | |
| LProp_AnalyticCurInf | Computes the locals extremas of curvature of a gp curve Remark : a gp curve has not inflection |
| LProp_CurAndInf | Stores the parameters of a curve 2d or 3d corresponding to the curvature's extremas and the Inflection's Points |
| LProp_SequenceNodeOfSequenceOfCIType | |
| LProp_SequenceOfCIType | |
| maovpar_1_ | |
| maovpch_1_ | |
| MAT2d_Array2OfConnexion | |
| MAT2d_BiInt | BiInt is a set of two integers |
| MAT2d_Circuit | Constructs a circuit on a set of lines. EquiCircuit gives a Circuit passing by all the lines in a set and all the connexions of the minipath associated |
| MAT2d_Connexion | A Connexion links two lines of items in a set of lines. It s contains two points and their paramatric definitions on the lines. The items can be points or curves |
| MAT2d_CutCurve | Cuts a curve at the extremas of curvature and at the inflections. Constructs a trimmed Curve for each interval |
| MAT2d_DataMapIteratorOfDataMapOfBiIntInteger | |
| MAT2d_DataMapIteratorOfDataMapOfBiIntSequenceOfInteger | |
| MAT2d_DataMapIteratorOfDataMapOfIntegerBisec | |
| MAT2d_DataMapIteratorOfDataMapOfIntegerConnexion | |
| MAT2d_DataMapIteratorOfDataMapOfIntegerPnt2d | |
| MAT2d_DataMapIteratorOfDataMapOfIntegerSequenceOfConnexion | |
| MAT2d_DataMapIteratorOfDataMapOfIntegerVec2d | |
| MAT2d_DataMapNodeOfDataMapOfBiIntInteger | |
| MAT2d_DataMapNodeOfDataMapOfBiIntSequenceOfInteger | |
| MAT2d_DataMapNodeOfDataMapOfIntegerBisec | |
| MAT2d_DataMapNodeOfDataMapOfIntegerConnexion | |
| MAT2d_DataMapNodeOfDataMapOfIntegerPnt2d | |
| MAT2d_DataMapNodeOfDataMapOfIntegerSequenceOfConnexion | |
| MAT2d_DataMapNodeOfDataMapOfIntegerVec2d | |
| MAT2d_DataMapOfBiIntInteger | |
| MAT2d_DataMapOfBiIntSequenceOfInteger | |
| MAT2d_DataMapOfIntegerBisec | |
| MAT2d_DataMapOfIntegerConnexion | |
| MAT2d_DataMapOfIntegerPnt2d | |
| MAT2d_DataMapOfIntegerSequenceOfConnexion | |
| MAT2d_DataMapOfIntegerVec2d | |
| MAT2d_MapBiIntHasher | |
| MAT2d_Mat2d | This class contains the generic algoritm of computation of the bisecting locus |
| MAT2d_MiniPath | MiniPath computes a path to link all the lines in a set of lines. The path is described as a set of connexions |
| MAT2d_SequenceNodeOfSequenceOfConnexion | |
| MAT2d_SequenceNodeOfSequenceOfSequenceOfCurve | |
| MAT2d_SequenceNodeOfSequenceOfSequenceOfGeometry | |
| MAT2d_SequenceOfConnexion | |
| MAT2d_SequenceOfSequenceOfCurve | |
| MAT2d_SequenceOfSequenceOfGeometry | |
| MAT2d_SketchExplorer | SketchExplorer is an iterator on a sketch. A sketch is a set of contours, each contour is a set of curves from Geom2d. It's use by BisectingLocus |
| MAT2d_Tool2d | Set of the methods useful for the MAT's computation. Tool2d contains the geometry of the bisecting locus |
| MAT_Arc | An Arc is associated to each Bisecting of the mat |
| MAT_BasicElt | A BasicELt is associated to each elemtary constituant of the figure |
| MAT_Bisector | |
| MAT_DataMapIteratorOfDataMapOfIntegerArc | |
| MAT_DataMapIteratorOfDataMapOfIntegerBasicElt | |
| MAT_DataMapIteratorOfDataMapOfIntegerBisector | |
| MAT_DataMapIteratorOfDataMapOfIntegerNode | |
| MAT_DataMapNodeOfDataMapOfIntegerArc | |
| MAT_DataMapNodeOfDataMapOfIntegerBasicElt | |
| MAT_DataMapNodeOfDataMapOfIntegerBisector | |
| MAT_DataMapNodeOfDataMapOfIntegerNode | |
| MAT_DataMapOfIntegerArc | |
| MAT_DataMapOfIntegerBasicElt | |
| MAT_DataMapOfIntegerBisector | |
| MAT_DataMapOfIntegerNode | |
| MAT_Edge | |
| MAT_Graph | The Class Graph permits the exploration of the Bisector Locus |
| MAT_ListOfBisector | |
| MAT_ListOfEdge | |
| MAT_Node | Node of Graph |
| MAT_SequenceNodeOfSequenceOfArc | |
| MAT_SequenceNodeOfSequenceOfBasicElt | |
| MAT_SequenceOfArc | |
| MAT_SequenceOfBasicElt | |
| MAT_TListNodeOfListOfBisector | |
| MAT_TListNodeOfListOfEdge | |
| MAT_Zone | Definition of Zone of Proximity of a BasicElt :A Zone of proximity is the set of the points which are more near from the BasicElt than any other |
| math | |
| math_Array1OfValueAndWeight | |
| math_BFGS | This class implements the Broyden-Fletcher-Goldfarb-Shanno variant of Davidson-Fletcher-Powell minimization algorithm of a function of multiple variables.Knowledge of the function's gradient is required |
| math_BissecNewton | This class implements a combination of Newton-Raphson and bissection methods to find the root of the function between two bounds. Knowledge of the derivative is required |
| math_BracketedRoot | This class implements the Brent method to find the root of a function located within two bounds. No knowledge of the derivative is required |
| math_BracketMinimum | Given two distinct initial points, BracketMinimum implements the computation of three points (a, b, c) which bracket the minimum of the function and verify A less than B, B less than C and F(A) less than F(B), F(B) less than (C) |
| math_BrentMinimum | This class implements the Brent's method to find the minimum of a function of a single variable. No knowledge of the derivative is required |
| math_BullardGenerator | Fast random number generator (the algorithm proposed by Ian C. Bullard) |
| math_CompareOfValueAndWeight | |
| math_ComputeGaussPointsAndWeights | |
| math_ComputeKronrodPointsAndWeights | |
| math_Crout | This class implements the Crout algorithm used to solve a system A*X = B where A is a symmetric matrix. It can be used to invert a symmetric matrix. This algorithm is similar to Gauss but is faster than Gauss. Only the inferior triangle of A and the diagonal can be given |
| math_DirectPolynomialRoots | This class implements the calculation of all the real roots of a real polynomial of degree <= 4 using a direct method. Once found, the roots are polished using the Newton method |
| math_DoubleTab | |
| math_EigenValuesSearcher | This class finds eigen values and vectors of real symmetric tridiagonal matrix |
| math_FRPR | This class implements the Fletcher-Reeves-Polak_Ribiere minimization algorithm of a function of multiple variables. Knowledge of the function's gradient is required |
| math_Function | This abstract class describes the virtual functions associated with a Function of a single variable |
| math_FunctionAllRoots | This algorithm uses a sample of the function to find all intervals on which the function is null, and afterwards uses the FunctionRoots algorithm to find the points where the function is null outside the "null intervals". Knowledge of the derivative is required |
| math_FunctionRoot | This class implements the computation of a root of a function of a single variable which is near an initial guess using a minimization algorithm.Knowledge of the derivative is required. The algorithm used is the same as in |
| math_FunctionRoots | This class implements an algorithm which finds all the real roots of a function with derivative within a given range. Knowledge of the derivative is required |
| math_FunctionSample | This class gives a default sample (constant difference of parameter) for a function defined between two bound A,B |
| math_FunctionSet | This abstract class describes the virtual functions associated to a set on N Functions of M independant variables |
| math_FunctionSetRoot | Calculates the root of a set of N functions of M variables (N<M, N=M or N>M). Knowing an initial guess of the solution and using a minimization algorithm, a search is made in the Newton direction and then in the Gradient direction if there is no success in the Newton direction. This algorithm can also be used for functions minimization. Knowledge of all the partial derivatives (the Jacobian) is required |
| math_FunctionSetWithDerivatives | This abstract class describes the virtual functions associated with a set of N Functions each of M independant variables |
| math_FunctionWithDerivative | This abstract class describes the virtual functions associated with a function of a single variable for which the first derivative is available |
| math_Gauss | This class implements the Gauss LU decomposition (Crout algorithm) with partial pivoting (rows interchange) of a square matrix and the different possible derived calculation : |
| math_GaussLeastSquare | This class implements the least square solution of a set of n linear equations of m unknowns (n >= m) using the gauss LU decomposition algorithm. This algorithm is more likely subject to numerical instability than math_SVD |
| math_GaussMultipleIntegration | This class implements the integration of a function of multiple variables between the parameter bounds Lower[a..b] and Upper[a..b]. Warning: Each element of Order must be inferior or equal to 61 |
| math_GaussSetIntegration | – This class implements the integration of a set of N functions of M variables variables between the parameter bounds Lower[a..b] and Upper[a..b]. Warning: - The case M>1 is not implemented |
| math_GaussSingleIntegration | This class implements the integration of a function of a single variable between the parameter bounds Lower and Upper. Warning: Order must be inferior or equal to 61 |
| math_GlobOptMin | This class represents Evtushenko's algorithm of global optimization based on nonuniform mesh. Article: Yu. Evtushenko. Numerical methods for finding global extreme (case of a non-uniform mesh). U.S.S.R. Comput. Maths. Math. Phys., Vol. 11, N 6, pp. 38-54 |
| math_Householder | This class implements the least square solution of a set of linear equations of m unknowns (n >= m) using the Householder method. It solves A.X = B. This algorithm has more numerical stability than GaussLeastSquare but is longer. It must be used if the matrix is singular or nearly singular. It is about 16% longer than GaussLeastSquare if there is only one member B to solve. It is about 30% longer if there are twenty B members to solve |
| math_IntegerVector | This class implements the real IntegerVector abstract data type. IntegerVectors can have an arbitrary range which must be define at the declaration and cannot be changed after this declaration. Example: |
| math_Jacobi | This class implements the Jacobi method to find the eigenvalues and the eigenvectors of a real symmetric square matrix. A sort of eigenvalues is done |
| math_KronrodSingleIntegration | This class implements the Gauss-Kronrod method of integral computation |
| math_Matrix | This class implements the real matrix abstract data type. Matrixes can have an arbitrary range which must be defined at the declaration and cannot be changed after this declaration math_Matrix(-3,5,2,4); //a vector with range [-3..5, 2..4] Matrix values may be initialized and retrieved using indexes which must lie within the range of definition of the matrix. Matrix objects follow "value semantics", that is, they cannot be shared and are copied through assignment Matrices are copied through assignement: math_Matrix M2(1, 9, 1, 3); ... M2 = M1; M1(1) = 2.0;//the matrix M2 will not be modified |
| math_MultipleVarFunction | Describes the virtual functions associated with a multiple variable function |
| math_MultipleVarFunctionWithGradient | The abstract class MultipleVarFunctionWithGradient describes the virtual functions associated with a multiple variable function |
| math_MultipleVarFunctionWithHessian | |
| math_NewtonFunctionRoot | This class implements the calculation of a root of a function of a single variable starting from an initial near guess using the Newton algorithm. Knowledge of the derivative is required |
| math_NewtonFunctionSetRoot | This class computes the root of a set of N functions of N variables, knowing an initial guess at the solution and using the Newton Raphson algorithm. Knowledge of all the partial derivatives (Jacobian) is required |
| math_NewtonMinimum | |
| math_Powell | This class implements the Powell method to find the minimum of function of multiple variables (the gradient does not have to be known) |
| math_PSO | In this class implemented variation of Particle Swarm Optimization (PSO) method. A. Ismael F. Vaz, L. N. Vicente "A particle swarm pattern search method for bound constrained global optimization" |
| math_PSOParticlesPool | |
| math_QuickSortOfValueAndWeight | |
| math_SingleTab | |
| math_SVD | SVD implements the solution of a set of N linear equations of M unknowns without condition on N or M. The Singular Value Decomposition algorithm is used. For singular or nearly singular matrices SVD is a better choice than Gauss or GaussLeastSquare |
| math_TrigonometricFunctionRoots | This class implements the solutions of the equation a*Cos(x)*Cos(x) + 2*b*Cos(x)*Sin(x) + c*Cos(x) + d*Sin(x) + e The degree of this equation can be 4, 3 or 2 |
| math_Uzawa | This class implements a system resolution C*X = B with an approach solution X0. There are no conditions on the number of equations. The algorithm used is the Uzawa algorithm. It is possible to have equal or inequal (<) equations to solve. The resolution is done with a minimization of Norm(X-X0). If there are only equal equations, the resolution is directly done and is similar to Gauss resolution with an optimisation because the matrix is a symmetric matrix. (The resolution is done with Crout algorithm) |
| math_ValueAndWeight | |
| math_Vector | This class implements the real vector abstract data type. Vectors can have an arbitrary range which must be defined at the declaration and cannot be changed after this declaration |
| MDataStd | Storage and Retrieval drivers for modelling attributes. Transient attributes are defined in package TDataStd and persistent one are defined in package PDataStd |
| MDataStd_AsciiStringRetrievalDriver | Retrieval driver of AsciiString attribute |
| MDataStd_AsciiStringStorageDriver | Storage driver for AsciiString attribute |
| MDataStd_BooleanArrayRetrievalDriver | |
| MDataStd_BooleanArrayStorageDriver | |
| MDataStd_BooleanListRetrievalDriver | |
| MDataStd_BooleanListStorageDriver | |
| MDataStd_ByteArrayRetrievalDriver | |
| MDataStd_ByteArrayRetrievalDriver_1 | Retrieval driver of ByteArray attribute supporting delta mechanism by default |
| MDataStd_ByteArrayStorageDriver | |
| MDataStd_CommentRetrievalDriver | |
| MDataStd_CommentStorageDriver | |
| MDataStd_DirectoryRetrievalDriver | |
| MDataStd_DirectoryStorageDriver | |
| MDataStd_ExpressionRetrievalDriver | |
| MDataStd_ExpressionStorageDriver | |
| MDataStd_ExtStringArrayRetrievalDriver | |
| MDataStd_ExtStringArrayRetrievalDriver_1 | Retrieval driver of ExtStringArray attribute supporting delta mechanism by default |
| MDataStd_ExtStringArrayStorageDriver | |
| MDataStd_ExtStringListRetrievalDriver | |
| MDataStd_ExtStringListStorageDriver | |
| MDataStd_IntegerArrayRetrievalDriver | |
| MDataStd_IntegerArrayRetrievalDriver_1 | Retrieval driver of IntegerArray attribute supporting delta mechanism by default |
| MDataStd_IntegerArrayStorageDriver | |
| MDataStd_IntegerListRetrievalDriver | |
| MDataStd_IntegerListStorageDriver | |
| MDataStd_IntegerRetrievalDriver | |
| MDataStd_IntegerStorageDriver | |
| MDataStd_IntPackedMapRetrievalDriver | Retrieval driver of IntPackedMap attribute |
| MDataStd_IntPackedMapRetrievalDriver_1 | Retrieval driver of IntPackedMap attribute supporting delta mechanism by default |
| MDataStd_IntPackedMapStorageDriver | Storage driver for IntPackedMap attribute |
| MDataStd_NamedDataRetrievalDriver | |
| MDataStd_NamedDataStorageDriver | |
| MDataStd_NameRetrievalDriver | |
| MDataStd_NameStorageDriver | |
| MDataStd_NoteBookRetrievalDriver | |
| MDataStd_NoteBookStorageDriver | |
| MDataStd_RealArrayRetrievalDriver | |
| MDataStd_RealArrayRetrievalDriver_1 | Retrieval driver of RealArray attribute supporting delta mechanism by default |
| MDataStd_RealArrayStorageDriver | |
| MDataStd_RealListRetrievalDriver | |
| MDataStd_RealListStorageDriver | |
| MDataStd_RealRetrievalDriver | |
| MDataStd_RealStorageDriver | |
| MDataStd_ReferenceArrayRetrievalDriver | |
| MDataStd_ReferenceArrayStorageDriver | |
| MDataStd_ReferenceListRetrievalDriver | |
| MDataStd_ReferenceListStorageDriver | |
| MDataStd_RelationRetrievalDriver | |
| MDataStd_RelationStorageDriver | |
| MDataStd_TickRetrievalDriver | |
| MDataStd_TickStorageDriver | |
| MDataStd_TreeNodeRetrievalDriver | |
| MDataStd_TreeNodeStorageDriver | |
| MDataStd_UAttributeRetrievalDriver | |
| MDataStd_UAttributeStorageDriver | |
| MDataStd_VariableRetrievalDriver | |
| MDataStd_VariableStorageDriver | |
| MDataXtd | Storage and Retrieval drivers for modelling attributes. Transient attributes are defined in package TDataStd and persistent one are defined in package PDataStd |
| MDataXtd_AxisRetrievalDriver | |
| MDataXtd_AxisStorageDriver | |
| MDataXtd_ConstraintRetrievalDriver | |
| MDataXtd_ConstraintStorageDriver | |
| MDataXtd_GeometryRetrievalDriver | |
| MDataXtd_GeometryStorageDriver | |
| MDataXtd_PatternStdRetrievalDriver | |
| MDataXtd_PatternStdStorageDriver | |
| MDataXtd_PlacementRetrievalDriver | |
| MDataXtd_PlacementStorageDriver | |
| MDataXtd_PlaneRetrievalDriver | |
| MDataXtd_PlaneStorageDriver | |
| MDataXtd_PointRetrievalDriver | |
| MDataXtd_PointStorageDriver | |
| MDataXtd_ShapeRetrievalDriver | |
| MDataXtd_ShapeStorageDriver | |
| MDF | This package provides classes and methods to translate a transient DF into a persistent one and vice versa |
| MDF_ARDriver | Attribute Retrieval Driver |
| MDF_ARDriverHSequence | |
| MDF_ARDriverSequence | |
| MDF_ARDriverTable | |
| MDF_ASDriver | Attribute Storage Driver |
| MDF_ASDriverHSequence | |
| MDF_ASDriverSequence | |
| MDF_ASDriverTable | |
| MDF_DataMapIteratorOfTypeARDriverMap | |
| MDF_DataMapIteratorOfTypeASDriverMap | |
| MDF_DataMapIteratorOfTypeDriverListMapOfARDriverTable | |
| MDF_DataMapIteratorOfTypeDriverListMapOfASDriverTable | |
| MDF_DataMapNodeOfTypeARDriverMap | |
| MDF_DataMapNodeOfTypeASDriverMap | |
| MDF_DataMapNodeOfTypeDriverListMapOfARDriverTable | |
| MDF_DataMapNodeOfTypeDriverListMapOfASDriverTable | |
| MDF_DriverListOfARDriverTable | |
| MDF_DriverListOfASDriverTable | |
| MDF_ListIteratorOfDriverListOfARDriverTable | |
| MDF_ListIteratorOfDriverListOfASDriverTable | |
| MDF_ListNodeOfDriverListOfARDriverTable | |
| MDF_ListNodeOfDriverListOfASDriverTable | |
| MDF_ReferenceRetrievalDriver | |
| MDF_ReferenceStorageDriver | |
| MDF_RRelocationTable | |
| MDF_SequenceNodeOfARDriverSequence | |
| MDF_SequenceNodeOfASDriverSequence | |
| MDF_SRelocationTable | |
| MDF_TagSourceRetrievalDriver | |
| MDF_TagSourceStorageDriver | |
| MDF_Tool | A tool to translate.. |
| MDF_TypeARDriverMap | |
| MDF_TypeASDriverMap | |
| MDF_TypeDriverListMapOfARDriverTable | |
| MDF_TypeDriverListMapOfASDriverTable | |
| mdnombr_1_ | |
| MDocStd | Drivers for TDocStd_Document |
| MDocStd_DocumentRetrievalDriver | Retrieval driver of a standard document |
| MDocStd_DocumentStorageDriver | Storage driver for a standard document |
| MDocStd_XLinkRetrievalDriver | Tool used to translate a persistent XLink into a transient one |
| MDocStd_XLinkStorageDriver | Tool used to translate a transient XLink into a persistent one |
| MeshTest | Provides methods for testing the mesh algorithms |
| MeshTest_CheckTopology | This class checks topology of the mesh presented by triangulations of faces |
| MeshTest_DrawableMesh | A drawable mesh. Provides a mesh object inherited from Drawable3d to draw a triangulation. It contains a sequence of highlighted edges and highlighted vertices. |
| MeshVS_Array1OfSequenceOfInteger | |
| MeshVS_Buffer | |
| MeshVS_ColorHasher | Hasher for using in ColorToIdsMap from MeshVS |
| MeshVS_DataMapIteratorOfDataMapOfColorMapOfInteger | |
| MeshVS_DataMapIteratorOfDataMapOfHArray1OfSequenceOfInteger | |
| MeshVS_DataMapIteratorOfDataMapOfIntegerAsciiString | |
| MeshVS_DataMapIteratorOfDataMapOfIntegerBoolean | |
| MeshVS_DataMapIteratorOfDataMapOfIntegerColor | |
| MeshVS_DataMapIteratorOfDataMapOfIntegerMaterial | |
| MeshVS_DataMapIteratorOfDataMapOfIntegerMeshEntityOwner | |
| MeshVS_DataMapIteratorOfDataMapOfIntegerOwner | |
| MeshVS_DataMapIteratorOfDataMapOfIntegerTwoColors | |
| MeshVS_DataMapIteratorOfDataMapOfIntegerVector | |
| MeshVS_DataMapIteratorOfDataMapOfTwoColorsMapOfInteger | |
| MeshVS_DataMapNodeOfDataMapOfColorMapOfInteger | |
| MeshVS_DataMapNodeOfDataMapOfHArray1OfSequenceOfInteger | |
| MeshVS_DataMapNodeOfDataMapOfIntegerAsciiString | |
| MeshVS_DataMapNodeOfDataMapOfIntegerBoolean | |
| MeshVS_DataMapNodeOfDataMapOfIntegerColor | |
| MeshVS_DataMapNodeOfDataMapOfIntegerMaterial | |
| MeshVS_DataMapNodeOfDataMapOfIntegerMeshEntityOwner | |
| MeshVS_DataMapNodeOfDataMapOfIntegerOwner | |
| MeshVS_DataMapNodeOfDataMapOfIntegerTwoColors | |
| MeshVS_DataMapNodeOfDataMapOfIntegerVector | |
| MeshVS_DataMapNodeOfDataMapOfTwoColorsMapOfInteger | |
| MeshVS_DataMapOfColorMapOfInteger | |
| MeshVS_DataMapOfHArray1OfSequenceOfInteger | |
| MeshVS_DataMapOfIntegerAsciiString | |
| MeshVS_DataMapOfIntegerBoolean | |
| MeshVS_DataMapOfIntegerColor | |
| MeshVS_DataMapOfIntegerMaterial | |
| MeshVS_DataMapOfIntegerMeshEntityOwner | |
| MeshVS_DataMapOfIntegerOwner | |
| MeshVS_DataMapOfIntegerTwoColors | |
| MeshVS_DataMapOfIntegerVector | |
| MeshVS_DataMapOfTwoColorsMapOfInteger | |
| MeshVS_DataSource | The deferred class using for the following tasks: 1) Receiving geometry data about single element of node by its number; 2) Receiving type of element or node by its number; 3) Receiving topological information about links between element and nodes it consist of; 4) Receiving information about what element cover this node; 5) Receiving information about all nodes and elements the object consist of 6) Activation of advanced mesh selection. In the advanced mesh selection mode there is created: |
| MeshVS_DataSource3D | |
| MeshVS_DeformedDataSource | The class provides default class which helps to represent node displacements by deformed mesh This class has an internal handle to canonical non-deformed mesh data source and map of displacement vectors. The displacement can be magnified to useful size. All methods is implemented with calling the corresponding methods of non-deformed data source |
| MeshVS_Drawer | This class provided the common interface to share between classes big set of constants affecting to object appearance. By default, this class can store integers, doubles, OCC colors, OCC materials. Each of OCC enum members can be stored as integers |
| MeshVS_DummySensitiveEntity | This class allows to create owners to all elements or nodes, both hidden and shown, but these owners user cannot select "by hands" in viewer. They means for internal application tasks, for example, receiving all owners, both for hidden and shown entities |
| MeshVS_ElementalColorPrsBuilder | This class provides methods to create presentation of elements with assigned colors. The class contains two color maps: map of same colors for front and back side of face and map of different ones, |
| MeshVS_HArray1OfSequenceOfInteger | |
| MeshVS_MapIteratorOfMapOfTwoNodes | |
| MeshVS_MapOfTwoNodes | |
| MeshVS_Mesh | Main class provides interface to create mesh presentation as a whole |
| MeshVS_MeshEntityOwner | The custom owner. This class provides methods to store owner information: 1) An address of element or node data structure 2) Type of node or element owner assigned 3) ID of node or element owner assigned |
| MeshVS_MeshOwner | The custom mesh owner used for advanced mesh selection. This class provides methods to store information: 1) IDs of hilighted mesh nodes and elements 2) IDs of mesh nodes and elements selected on the mesh |
| MeshVS_MeshPrsBuilder | This class provides methods to compute base mesh presentation |
| MeshVS_NodalColorPrsBuilder | This class provides methods to create presentation of nodes with assigned color. There are two ways of presentation building |
| MeshVS_PrsBuilder | This class is parent for all builders using in MeshVS_Mesh. It provides base fields and methods all buildes need |
| MeshVS_SensitiveFace | This class provides custom sensitive face, which will be selected if it center is in rectangle |
| MeshVS_SensitiveMesh | This class provides custom mesh sensitive entity used in advanced mesh selection |
| MeshVS_SensitivePolyhedron | This class is used to detect selection of a polyhedron. The main principle of detection algorithm is to search for overlap with each polyhedron's face separately, treating them as planar convex polygons |
| MeshVS_SensitiveSegment | This class provides custom sensitive face, which will be selected if it center is in rectangle |
| MeshVS_SequenceNodeOfSequenceOfPrsBuilder | |
| MeshVS_SequenceOfPrsBuilder | |
| MeshVS_StdMapNodeOfMapOfTwoNodes | |
| MeshVS_SymmetricPairHasher | Provides symmetric hash methods pair of integers |
| MeshVS_TextPrsBuilder | This class provides methods to create text data presentation. It store map of texts assigned with nodes or elements |
| MeshVS_Tool | This class provides auxiliary methods to create differents aspects |
| MeshVS_TwoColors | |
| MeshVS_TwoColorsHasher | |
| MeshVS_TwoNodes | Structure containing two IDs (of nodes) for using as a key in a map (as representation of a mesh link) |
| MeshVS_TwoNodesHasher | |
| MeshVS_VectorPrsBuilder | This class provides methods to create vector data presentation. It store map of vectors assigned with nodes or elements. In simplified mode vectors draws with thickened ends instead of arrows |
| Message | Defines |
| Message_Algorithm | Class Message_Algorithm is intended to be the base class for classes implementing algorithms or any operations that need to provide extended information on its execution to the caller / user |
| Message_ExecStatus | |
| Message_ListIteratorOfListOfMsg | |
| Message_ListNodeOfListOfMsg | |
| Message_ListOfMsg | |
| Message_Messenger | Messenger is API class providing general-purpose interface for libraries that may issue text messages without knowledge of how these messages will be further processed |
| Message_Msg | This class provides a tool for constructing the parametrized message basing on resources loaded by Message_MsgFile tool |
| Message_MsgFile | A tool providing facility to load definitions of message strings from resource file(s) |
| Message_Printer | Abstract interface class defining printer as output context for text messages |
| Message_PrinterOStream | Implementation of a message printer associated with an ostream The ostream may be either externally defined one (e.g. cout), or file stream maintained internally (depending on constructor) |
| Message_ProgressIndicator | Defines abstract interface from program to the "user". That includes progress indication and user break mechanisms |
| Message_ProgressScale | Internal data structure for scale in ProgressIndicator |
| Message_ProgressSentry | This class is a tool allowing to manage opening/closing scopes in the ProgressIndicator in convenient and safe way |
| Message_SequenceNodeOfSequenceOfPrinters | |
| Message_SequenceNodeOfSequenceOfProgressScale | |
| Message_SequenceOfPrinters | |
| Message_SequenceOfProgressScale | |
| MFunction | |
| MFunction_FunctionRetrievalDriver | |
| MFunction_FunctionStorageDriver | |
| MgtBRep | The MgtBRep package provides methods to translate data between the BRep package and the PBRep package |
| MgtBRep_TranslateTool | The TranslateTool class is provided to support the translation of BRep topological data structures. Used to call the MgtTopoDS methods |
| MgtBRep_TranslateTool1 | The TranslateTool1 class is provided to support the translation of BRep topological data structures. Used to call the MgtTopoDS methods |
| MgtGeom | This package provides methods to translate transient objects from Geom to persistent objects from PGeom and vice-versa. No track from previous translation is kept |
| MgtGeom2d | This package provides methods to translate transient objects from Geom2d to persistent objects from PGeom2d and vice-versa. No track from previous translation is kept |
| MgtPoly | This package provides methods to translate transient objects from Poly to persistent objects from PPoly and vice-versa. As far as objects can be shared (just as Geometry), a map is given as translate argument |
| MgtTopLoc | The package MgtTopLoc provides methods to store and retrieve local coordinate systems. i.e. translationg them from Persistent to Transient and vice-versa |
| MgtTopoDS | The package MgtTopoDS provides methods to store and retrieve Topological Data Structure objects from the Database |
| MgtTopoDS_TranslateTool | The TranslateTool class is provided to support the translation of inherited parts of topological data structures. Root of all translation tools |
| MgtTopoDS_TranslateTool1 | The TranslateTool1 class is provided to support the translation of inherited parts of topological data structures. Root of all translation tools |
| minombr_1_ | |
| mlgdrtl_1_ | |
| mmapgs0_1_ | |
| mmapgs1_1_ | |
| mmapgs2_1_ | |
| mmapgss_1_ | |
| mmcmcnp_1_ | |
| MMgt_TShared | Intermediate class between Standard_Transient and descendants. The abstract class TShared is the root class of managed objects. TShared objects are managed by a memory manager based on reference counting. They have handle semantics. In other words, the reference counter is transparently incremented and decremented according to the scope of handles. When all handles, which reference a single object are out of scope, the reference counter becomes null and the object is automatically deleted. The deallocated memory is not given back to the system though. It is reclaimed for new objects of the same size. Warning This memory management scheme does not work for cyclic data structures. In such cases (with back pointers for example), you should interrupt the cycle in a class by using a full C++ pointer instead of a handle |
| mmjcobi_1_ | |
| MNaming | |
| MNaming_NamedShapeRetrievalDriver | |
| MNaming_NamedShapeStorageDriver | |
| MNaming_NamingRetrievalDriver | |
| MNaming_NamingRetrievalDriver_1 | |
| MNaming_NamingRetrievalDriver_2 | |
| MNaming_NamingStorageDriver | |
| MoniTool_AttrList | AttrList allows to record a list of attributes as Transients which can be edited, changed ... Each one is identified by a name |
| MoniTool_CaseData | This class is intended to record data attached to a case to be exploited. Cases can be : |
| MoniTool_DataInfo | Gives informations on an object Used as template to instantiate Elem, etc This class is for Transient |
| MoniTool_DataMapIteratorOfDataMapOfShapeTransient | |
| MoniTool_DataMapIteratorOfDataMapOfTimer | |
| MoniTool_DataMapNodeOfDataMapOfShapeTransient | |
| MoniTool_DataMapNodeOfDataMapOfTimer | |
| MoniTool_DataMapOfShapeTransient | |
| MoniTool_DataMapOfTimer | |
| MoniTool_Element | Element allows to map any kind of object as a Key for a Map. This works by defining, for a Hash Code, that of the real Key, not of the Element which acts only as an intermediate. When a Map asks for the HashCode of a Element, this one returns the code it has determined at creation time |
| MoniTool_ElemHasher | ElemHasher defines HashCode for Element, which is : ask a Element its HashCode ! Because this is the Element itself which brings the HashCode for its Key |
| MoniTool_HSequenceOfElement | |
| MoniTool_IndexedDataMapNodeOfIndexedDataMapOfShapeTransient | |
| MoniTool_IndexedDataMapOfShapeTransient | |
| MoniTool_IntVal | An Integer through a Handle (i.e. managed as TShared) |
| MoniTool_MTHasher | The auxiliary class provides hash code for mapping objects |
| MoniTool_Option | An Option gives a way of recording an enumerated list of instances of a given class, each instance being identified by a case name |
| MoniTool_OptValue | This class allows two kinds of use |
| MoniTool_Profile | A Profile gives access to a set of options : |
| MoniTool_RealVal | A Real through a Handle (i.e. managed as TShared) |
| MoniTool_SequenceNodeOfSequenceOfElement | |
| MoniTool_SequenceOfElement | |
| MoniTool_SignShape | Signs HShape according to its real content (type of Shape) Context is not used |
| MoniTool_SignText | Provides the basic service to get a text which identifies an object in a context It can be used for other classes (general signatures ...) It can also be used to build a message in which an object is to be identified |
| MoniTool_Stat | This class manages Statistics to be queried asynchronously |
| MoniTool_Timer | Provides convenient service on global timers accessed by string name, mostly aimed for debugging purposes |
| MoniTool_TimerSentry | A tool to facilitate using MoniTool_Timer functionality by automatically ensuring consistency of start/stop actions |
| MoniTool_TransientElem | TransientElem defines an Element for a specific input class its definition includes the value of the Key to be mapped, and the HashCoder associated to the class of the Key |
| MoniTool_TypedValue | This class allows to dynamically manage .. typed values, i.e. values which have an alphanumeric expression, but with controls. Such as "must be an Integer" or "Enumerative Text" etc |
| MPrsStd | Storage and Retrieval drivers for graphic attributes. Transient attributes are defined in package TPrsStd and persistent one are defined in package PPrsStd |
| MPrsStd_AISPresentationRetrievalDriver | Retrieval drivers for graphic attributes from PPrsStd |
| MPrsStd_AISPresentationRetrievalDriver_1 | Retrieval drivers for graphic attributes from PPrsStd |
| MPrsStd_AISPresentationStorageDriver | Storage driver for graphic attributes from TPrsStd |
| MPrsStd_PositionRetrievalDriver | Retrieval drivers for graphic attributes from PPrsStd |
| MPrsStd_PositionStorageDriver | Storage driver for graphic attributes from TPrsStd |
| Multitype | |
| MXCAFDoc | |
| MXCAFDoc_AreaRetrievalDriver | |
| MXCAFDoc_AreaStorageDriver | |
| MXCAFDoc_CentroidRetrievalDriver | |
| MXCAFDoc_CentroidStorageDriver | |
| MXCAFDoc_ColorRetrievalDriver | |
| MXCAFDoc_ColorStorageDriver | |
| MXCAFDoc_ColorToolRetrievalDriver | |
| MXCAFDoc_ColorToolStorageDriver | |
| MXCAFDoc_DatumRetrievalDriver | |
| MXCAFDoc_DatumStorageDriver | |
| MXCAFDoc_DimTolRetrievalDriver | |
| MXCAFDoc_DimTolStorageDriver | |
| MXCAFDoc_DimTolToolRetrievalDriver | |
| MXCAFDoc_DimTolToolStorageDriver | |
| MXCAFDoc_DocumentToolRetrievalDriver | |
| MXCAFDoc_DocumentToolStorageDriver | |
| MXCAFDoc_GraphNodeRetrievalDriver | |
| MXCAFDoc_GraphNodeStorageDriver | |
| MXCAFDoc_LayerToolRetrievalDriver | |
| MXCAFDoc_LayerToolStorageDriver | |
| MXCAFDoc_LocationRetrievalDriver | |
| MXCAFDoc_LocationStorageDriver | |
| MXCAFDoc_MaterialRetrievalDriver | |
| MXCAFDoc_MaterialStorageDriver | |
| MXCAFDoc_MaterialToolRetrievalDriver | |
| MXCAFDoc_MaterialToolStorageDriver | |
| MXCAFDoc_ShapeToolRetrievalDriver | |
| MXCAFDoc_ShapeToolStorageDriver | |
| MXCAFDoc_VolumeRetrievalDriver | |
| MXCAFDoc_VolumeStorageDriver | |
| MyDirectPolynomialRoots | |
| Namelist | |
| NCollection_AccAllocator | Class NCollection_AccAllocator - accumulating memory allocator. This class allocates memory on request returning the pointer to the allocated space. The allocation units are grouped in blocks requested from the system as required. This memory is returned to the system when all allocations in a block are freed |
| NCollection_AlignedAllocator | NCollection allocator with managed memory alignment capabilities |
| NCollection_Array1 | |
| NCollection_Array2 | |
| NCollection_BaseAllocator | |
| NCollection_BaseList | |
| NCollection_BaseMap | |
| NCollection_BaseSequence | |
| NCollection_BaseVector | Class NCollection_BaseVector - base for NCollection_Vector template |
| NCollection_Buffer | Low-level buffer object |
| NCollection_CellFilter | |
| NCollection_CellFilter_InspectorXY | |
| NCollection_CellFilter_InspectorXYZ | |
| NCollection_Comparator | |
| NCollection_DataMap | |
| NCollection_DefaultHasher | |
| NCollection_DoubleMap | |
| NCollection_EBTree | |
| NCollection_Handle | Purpose: This template class is used to define Handle adaptor for allocated dynamically objects of arbitrary type |
| NCollection_HeapAllocator | |
| NCollection_IncAllocator | |
| NCollection_IndexedDataMap | |
| NCollection_IndexedMap | |
| NCollection_List | |
| NCollection_ListNode | |
| NCollection_LocalArray | Auxiliary class optimizing creation of array buffer (using stack allocation for small arrays) |
| NCollection_Map | |
| NCollection_Mat4 | Generic matrix of 4 x 4 elements. To be used in conjunction with NCollection_Vec4 entities. Originally introduced for 3D space projection and orientation operations |
| NCollection_QuickSort | |
| NCollection_SeqNode | |
| NCollection_Sequence | |
| NCollection_SparseArray | |
| NCollection_SparseArrayBase | |
| NCollection_StdAllocator | Implements allocator requirements as defined in ISO C++ Standard 2003, section 20.1.5 |
| NCollection_StdAllocator< void > | Implements specialization NCollection_StdAllocator<void> |
| NCollection_StlIterator | Helper class that allows to use NCollection iterators as STL iterators. NCollection iterator can be extended to STL iterator of any category by adding necessary methods: STL forward iterator requires IsEqual method, STL bidirectional iterator requires Previous method, and STL random access iterator requires Offset and Differ methods. See NCollection_Vector as example of declaring custom STL iterators |
| NCollection_TListIterator | |
| NCollection_TListNode | |
| NCollection_UBTree | |
| NCollection_UBTreeFiller | |
| NCollection_UtfIterator | Template class for Unicode strings support. It defines an iterator and provide correct way to read multi-byte text (UTF-8 and UTF-16) and convert it from one to another. The current value of iterator returned as UTF-32 Unicode code |
| NCollection_UtfString | This template class represent constant UTF-* string. String stored in memory continuously, always NULL-terminated and can be used as standard C-string using ToCString() method |
| NCollection_Vec2 | Defines the 2D-vector template. The main target for this class - to handle raw low-level arrays (from/to graphic driver etc.) |
| NCollection_Vec3 | Generic 3-components vector. To be used as RGB color pixel or XYZ 3D-point. The main target for this class - to handle raw low-level arrays (from/to graphic driver etc.) |
| NCollection_Vec4 | Generic 4-components vector. To be used as RGBA color vector or XYZW 3D-point with special W-component for operations with projection / model view matrices. Use this class for 3D-points carefully because declared W-component may results in incorrect results if used without matrices |
| NCollection_Vector | Class NCollection_Vector (dynamic array of objects) |
| NCollection_WinHeapAllocator | This memory allocator creates dedicated heap for allocations. This technics available only on Windows platform (no alternative on Unix systems). It may be used to take control over memory fragmentation because on destruction ALL allocated memory will be released to the system |
| NIS_Allocator | |
| NIS_Drawer | |
| NIS_DrawList | |
| NIS_InteractiveContext | |
| NIS_InteractiveObject | |
| NIS_ObjectsIterator | |
| NIS_SelectFilter | |
| NIS_Surface | |
| NIS_SurfaceDrawer | |
| NIS_Triangulated | |
| NIS_TriangulatedDrawer | |
| NIS_View | |
| NLPlate_HGPPConstraint | Define a PinPoint geometric Constraint used to load a Non Linear Plate |
| NLPlate_HPG0Constraint | Define a PinPoint G0 Constraint used to load a Non Linear Plate |
| NLPlate_HPG0G1Constraint | Define a PinPoint G0+G1 Constraint used to load a Non Linear Plate |
| NLPlate_HPG0G2Constraint | Define a PinPoint G0+G2 Constraint used to load a Non Linear Plate |
| NLPlate_HPG0G3Constraint | Define a PinPoint G0+G3 Constraint used to load a Non Linear Plate |
| NLPlate_HPG1Constraint | Define a PinPoint (no G0) G1 Constraint used to load a Non Linear Plate |
| NLPlate_HPG2Constraint | Define a PinPoint (no G0) G2 Constraint used to load a Non Linear Plate |
| NLPlate_HPG3Constraint | Define a PinPoint (no G0) G3 Constraint used to load a Non Linear Plate |
| NLPlate_ListIteratorOfStackOfPlate | |
| NLPlate_ListNodeOfStackOfPlate | |
| NLPlate_NLPlate | |
| NLPlate_SequenceNodeOfSequenceOfHGPPConstraint | |
| NLPlate_SequenceOfHGPPConstraint | |
| NLPlate_StackOfPlate | |
| ObjMgt_ExternRef | |
| ObjMgt_ExternShareable | |
| ObjMgt_PSeqOfExtRef | |
| ObjMgt_SeqExplorerOfPSeqOfExtRef | |
| ObjMgt_SeqNodeOfPSeqOfExtRef | |
| olist | |
| OpenGl_ArbDbg | Debug context routines |
| OpenGl_ArbFBO | FBO is available on OpenGL 2.0+ hardware |
| OpenGl_ArbFBOBlit | FBO blit is available in OpenGL 3.0+. Moved out from OpenGl_ArbFBO since it is unavailable in OpenGL ES 2.0 |
| OpenGl_ArbIns | Instancing is available on OpenGL 3.0+ hardware |
| OpenGl_ArbTBO | TBO is available on OpenGL 3.0+ hardware |
| OpenGl_ArbTexBindless | Provides bindless textures. This extension allows OpenGL applications to access texture objects in shaders without first binding each texture to one of a limited number of texture image units |
| OpenGl_AspectFace | |
| OpenGl_AspectLine | |
| OpenGl_AspectMarker | |
| OpenGl_AspectText | Text representation parameters |
| OpenGl_BackgroundArray | Tool class for generating reusable data for gradient or texture background rendering |
| OpenGl_BVHClipPrimitiveSet | Set of OpenGl_Structures for building BVH tree |
| OpenGl_BVHTreeSelector | BVHTreeSelector class provides a possibility to store parameters of view volume, such as its vertices and equations, and contains methods detecting if given AABB overlaps view volume |
| OpenGl_CappingAlgo | Capping surface rendering algorithm |
| OpenGl_CappingAlgoFilter | Graphical capping rendering algorithm filter. Filters out everything excepth shaded primitives |
| OpenGl_CappingPlaneResource | Container of graphical resources for rendering capping plane associated to graphical clipping plane. This resource holds data necessary for OpenGl_CappingAlgo. This object is implemented as OpenGl resource for the following reasons: |
| OpenGl_Caps | Class to define graphic driver capabilities. Notice that these options will be ignored if particular functionality does not provided by GL driver |
| OpenGl_Clipping | This class contains logics related to tracking and modification of clipping plane state for particular OpenGl context. It contains information about enabled clipping planes and provides method to change clippings in context. The methods should be executed within OpenGl context associated with instance of this class |
| OpenGl_ClippingState | Defines generic state of OCCT clipping state |
| OpenGl_Context | This class generalize access to the GL context and available extensions |
| OpenGl_CView | |
| OpenGl_Cylinder | Tool class for generating cylinder tessellation of quadric surface |
| OpenGl_Disk | Tool class for generating disk (circle) tessellation |
| OpenGl_Element | Base interface for drawable elements |
| OpenGl_ElementNode | |
| OpenGl_ExtGS | Geometry shader as extension is available on OpenGL 2.0+ |
| OpenGl_Flipper | Being rendered, the elements modifies current model-view matrix such that the axes of the specified reference system (in model space) become oriented in the following way: |
| OPENGL_FOG | |
| OpenGl_Font | Texture font |
| OpenGl_FrameBuffer | Class implements FrameBuffer Object (FBO) resource intended for off-screen rendering |
| OpenGl_GlCore11 | OpenGL 1.1 core. Notice that all functions within this structure are actually exported by system GL library. The main purpose for these hint - to control visibility of functions per GL version (global functions should not be used directly to achieve this effect!) |
| OpenGl_GlCore11Fwd | OpenGL 1.1 core without deprecated Fixed Pipeline entry points. Notice that all functions within this structure are actually exported by system GL library. The main purpose for these hint - to control visibility of functions per GL version (global functions should not be used directly to achieve this effect!) |
| OpenGl_GlCore13 | OpenGL 1.3 core based on 1.2 version |
| OpenGl_GlCore13Fwd | OpenGL 1.3 without deprecated entry points |
| OpenGl_GlFunctions | Mega structure defines the complete list of OpenGL functions |
| OpenGl_GlobalLayerSettings | |
| OpenGl_GraduatedTrihedron | This class allows to render Graduated Trihedron, i.e. trihedron with grid. it is based on Graphic3d_GraduatedTrihedron parameters and support its customization on construction level only |
| OpenGl_GraphicDriver | This class defines an OpenGl graphic driver |
| OpenGl_Group | Implementation of low-level graphic group |
| OpenGl_IndexBuffer | Index buffer is just a VBO with special target (GL_ELEMENT_ARRAY_BUFFER) |
| OpenGl_Layer | Presentations list sorted within priorities |
| OpenGl_LayerList | |
| OpenGl_LightSourceState | Defines state of OCCT light sources |
| OpenGl_LineAttributes | |
| OpenGl_Material | OpenGL material definition |
| OpenGl_MaterialState | Defines generic state of OCCT material properties |
| OpenGl_Matrix | |
| OpenGl_ModelWorldState | Defines state of OCCT model-world transformation |
| OpenGl_PointSprite | Point sprite resource. On modern hardware it will be texture with extra parameters. On ancient hardware sprites will be drawn using bitmaps |
| OpenGl_PrimitiveArray | Class for rendering of arbitrary primitive array |
| OpenGl_PrinterContext | Class provides specific information for redrawing view to offscreen buffer on printing. The information is: projection matrixes for tiling, scaling factors for text/markers and layer viewport dimensions |
| OpenGl_ProjectionState | Defines state of OCCT projection transformation |
| OpenGl_Quadric | Class for rendering of arbitrary primitive array. Tool class for generating tessellation of quadric surface |
| OpenGl_RaytraceFilter | Graphical ray-tracing filter. Filters out all raytracable structures |
| OpenGl_RaytraceGeometry | Stores geometry of ray-tracing scene |
| OpenGl_RaytraceLight | Stores properties of OpenGL light source |
| OpenGl_RaytraceMaterial | Stores properties of surface material |
| OpenGl_RenderFilter | Base class for defining element rendering filters. This class can be used in pair with advance rendering passes, and for disabling rendering (setting up) graphical aspects |
| OpenGl_Resource | Interface for OpenGl resource with following meaning: |
| OpenGl_Sampler | Class implements OpenGL sampler object resource that stores the sampling parameters for a texture access |
| OpenGl_SetOfShaderPrograms | Alias to programs array of predefined length |
| OpenGl_SetterInterface | Interface for generic setter of user-defined uniform variables |
| OpenGl_ShaderManager | This class is responsible for managing shader programs |
| OpenGl_ShaderObject | Wrapper for OpenGL shader object |
| OpenGl_ShaderProgram | Wrapper for OpenGL program object |
| OpenGl_Sphere | Tool class for generating sphere tessellation |
| OpenGl_StateCounter | Tool class to implement consistent state counter for objects inside the same driver instance |
| OpenGl_StateInterface | Defines interface for OpenGL state |
| OpenGl_StencilTest | |
| OpenGl_Structure | Implementation of low-level graphic structure |
| OpenGl_StructureShadow | Dummy structure which just redirects to groups of another structure |
| OPENGL_SURF_PROP | |
| OpenGl_SurfaceDetailState | Defines generic state of OCCT surface detail |
| OpenGl_Text | Text rendering |
| OpenGl_TextFormatter | This class intended to prepare formatted text |
| OpenGl_TextParam | |
| OpenGl_Texture | Texture resource |
| OpenGl_TextureBufferArb | Texture Buffer Object. This is a special 1D texture that VBO-style initialized. The main differences from general 1D texture: |
| OpenGl_TextureFormat | Stores parameters of OpenGL texture format |
| OpenGl_TextureFormatSelector | Selects preferable texture format for specified parameters |
| OpenGl_TextureFormatSelector< GLfloat > | |
| OpenGl_TextureFormatSelector< GLubyte > | |
| OpenGl_TextureFormatSelector< GLushort > | |
| OpenGl_TmplCore12 | OpenGL 1.2 core based on 1.1 version |
| OpenGl_TmplCore14 | OpenGL 1.4 core based on 1.3 version |
| OpenGl_TmplCore15 | |
| OpenGl_TmplCore20 | OpenGL 2.0 core based on 1.5 version |
| OpenGl_TmplCore21 | OpenGL 2.1 core based on 2.0 version |
| OpenGl_TmplCore30 | OpenGL 3.0 core. This is first version with deprecation model introduced |
| OpenGl_TmplCore31 | OpenGL 3.1 definition |
| OpenGl_TmplCore32 | OpenGL 3.2 definition |
| OpenGl_TmplCore33 | OpenGL 3.3 definition |
| OpenGl_TmplCore40 | OpenGL 4.0 definition |
| OpenGl_TmplCore41 | OpenGL 4.1 definition |
| OpenGl_TmplCore42 | OpenGL 4.2 definition |
| OpenGl_TmplCore43 | OpenGL 4.3 definition |
| OpenGl_TmplCore44 | OpenGL 4.4 definition |
| OpenGl_TriangleSet | Triangulation of single OpenGL primitive array |
| OpenGl_Trihedron | Class render trihedron |
| OpenGl_VariableSetter | |
| OpenGl_VariableSetterSelector | Support tool for setting user-defined uniform variables |
| OpenGl_VertexBuffer | Vertex Buffer Object - is a general storage object for vertex attributes (position, normal, color). Notice that you should use OpenGl_IndexBuffer specialization for array of indices |
| OpenGl_VertexBufferCompat | Compatibility layer for old OpenGL without VBO. Make sure to pass pointer from GetDataOffset() instead of NULL. Method GetDataOffset() returns pointer to real data in this class (while base class OpenGl_VertexBuffer always return NULL) |
| OpenGl_VertexBufferEditor | Auxiliary class to iteratively modify data of existing VBO. It provides iteration interface with delayed CPU->GPU memory transfer to avoid slow per-element data transfer. User should explicitly call Flush() method to ensure that all data is transferred to VBO. Temporary buffer on CPU side can be initialized with lesser capacity than VBO to allow re-usage of shared buffer with fixed size between VBOs |
| OpenGl_View | |
| OpenGl_Window | This class represents low-level wrapper over window with GL context. The window itself should be provided to constructor |
| OpenGl_Workspace | Represents window with GL context. Provides methods to render primitives and maintain GL state |
| OpenGl_WorldViewState | Defines state of OCCT world-view transformation |
| OPENGL_ZCLIP | |
| OSD | Set of Operating Sytem Dependent Tools (O)perating (S)ystem (D)ependent |
| OSD_Chronometer | This class measures CPU time (both user and system) consumed by current process or thread. The chronometer can be started and stopped multiple times, and measures cumulative time |
| OSD_Directory | Management of directories (a set of directory oriented tools) |
| OSD_DirectoryIterator | Manages a breadth-only search for sub-directories in the specified Path. There is no specific order of results |
| OSD_Disk | Disk management (a set of disk oriented tools) |
| OSD_Environment | Management of system environment variables An environment variable is composed of a variable name and its value |
| OSD_EnvironmentIterator | This allows consultation of every environment variable. There is no specific order of results |
| OSD_Error | Accurate management of OSD specific errors |
| OSD_File | Basic tools to manage files Warning: 'ProgramError' is raised when somebody wants to use the methods Read, Write, Seek, Close when File is not open |
| OSD_FileIterator | Manages a breadth-only search for files in the specified Path. There is no specific order of results |
| OSD_FileNode | A class for 'File' and 'Directory' grouping common methods (file/directory manipulation tools). The "file oriented" name means files or directories which are in fact hard coded as files |
| OSD_Host | Carries information about a Host System version ,host name, nodename .. |
| OSD_MAllocHook | |
| OSD_MemInfo | This class provide information about memory utilized by current process. This information includes: |
| OSD_Parallel | Simplifies code parallelization |
| OSD_Path | |
| OSD_PerfMeter | This class enables measuring the CPU time between two points of code execution, regardless of the scope of these points of code. A meter is identified by its name (string). So multiple objects in various places of user code may point to the same meter. The results will be printed on stdout upon finish of the program. For details see OSD_PerfMeter.h |
| OSD_Printer | Selects a printer (used by File) |
| OSD_Process | A set of system process tools |
| OSD_Protection | This class provides data to manage file protection Example:These rights are treated in a system dependent manner : On UNIX you have User,Group and Other rights On VMS you have Owner,Group,World and System rights An automatic conversion is done between OSD and UNIX/VMS |
| OSD_SharedLibrary | Interface to dynamic library loader. Provides tools to load a shared library and retrieve the address of an entry point |
| OSD_Thread | A simple platform-intependent interface to execute and control threads |
| OSD_Timer | Working on heterogeneous platforms we need to use the system call gettimeofday. This function is portable and it measures ELAPSED time and CPU time in seconds and microseconds. Example: OSD_Timer aTimer; aTimer.Start(); // Start the timers (t1). ..... // Do something. aTimer.Stop(); // Stop the timers (t2). aTimer.Show(); // Give the elapsed time between t1 and t2. // Give also the process CPU time between // t1 and t2 |
| PBRep_Curve3D | |
| PBRep_CurveOn2Surfaces | |
| PBRep_CurveOnClosedSurface | |
| PBRep_CurveOnSurface | |
| PBRep_CurveRepresentation | |
| PBRep_GCurve | |
| PBRep_PointOnCurve | |
| PBRep_PointOnCurveOnSurface | |
| PBRep_PointOnSurface | |
| PBRep_PointRepresentation | |
| PBRep_PointsOnSurface | |
| PBRep_Polygon3D | |
| PBRep_PolygonOnClosedSurface | |
| PBRep_PolygonOnClosedTriangulation | |
| PBRep_PolygonOnSurface | |
| PBRep_PolygonOnTriangulation | |
| PBRep_TEdge | |
| PBRep_TEdge1 | |
| PBRep_TFace | |
| PBRep_TFace1 | |
| PBRep_TVertex | |
| PBRep_TVertex1 | |
| PCDM | |
| PCDM_Document | |
| PCDM_DOMHeaderParser | |
| PCDM_Reader | |
| PCDM_ReadWriter | |
| PCDM_ReadWriter_1 | |
| PCDM_Reference | |
| PCDM_ReferenceIterator | |
| PCDM_RetrievalDriver | |
| PCDM_SequenceNodeOfSequenceOfDocument | |
| PCDM_SequenceNodeOfSequenceOfReference | |
| PCDM_SequenceOfDocument | |
| PCDM_SequenceOfReference | |
| PCDM_StorageDriver | Persistent implemention of storage |
| PCDM_Writer | |
| PCDMShape_Document | |
| PColgp_FieldOfHArray1OfCirc2d | |
| PColgp_FieldOfHArray1OfDir | |
| PColgp_FieldOfHArray1OfDir2d | |
| PColgp_FieldOfHArray1OfLin2d | |
| PColgp_FieldOfHArray1OfPnt | |
| PColgp_FieldOfHArray1OfPnt2d | |
| PColgp_FieldOfHArray1OfVec | |
| PColgp_FieldOfHArray1OfVec2d | |
| PColgp_FieldOfHArray1OfXY | |
| PColgp_FieldOfHArray1OfXYZ | |
| PColgp_FieldOfHArray2OfCirc2d | |
| PColgp_FieldOfHArray2OfDir | |
| PColgp_FieldOfHArray2OfDir2d | |
| PColgp_FieldOfHArray2OfLin2d | |
| PColgp_FieldOfHArray2OfPnt | |
| PColgp_FieldOfHArray2OfPnt2d | |
| PColgp_FieldOfHArray2OfVec | |
| PColgp_FieldOfHArray2OfVec2d | |
| PColgp_FieldOfHArray2OfXY | |
| PColgp_FieldOfHArray2OfXYZ | |
| PColgp_HArray1OfCirc2d | |
| PColgp_HArray1OfDir | |
| PColgp_HArray1OfDir2d | |
| PColgp_HArray1OfLin2d | |
| PColgp_HArray1OfPnt | |
| PColgp_HArray1OfPnt2d | |
| PColgp_HArray1OfVec | |
| PColgp_HArray1OfVec2d | |
| PColgp_HArray1OfXY | |
| PColgp_HArray1OfXYZ | |
| PColgp_HArray2OfCirc2d | |
| PColgp_HArray2OfDir | |
| PColgp_HArray2OfDir2d | |
| PColgp_HArray2OfLin2d | |
| PColgp_HArray2OfPnt | |
| PColgp_HArray2OfPnt2d | |
| PColgp_HArray2OfVec | |
| PColgp_HArray2OfVec2d | |
| PColgp_HArray2OfXY | |
| PColgp_HArray2OfXYZ | |
| PColgp_HSequenceOfDir | |
| PColgp_HSequenceOfPnt | |
| PColgp_HSequenceOfVec | |
| PColgp_HSequenceOfXYZ | |
| PColgp_SeqExplorerOfHSequenceOfDir | |
| PColgp_SeqExplorerOfHSequenceOfPnt | |
| PColgp_SeqExplorerOfHSequenceOfVec | |
| PColgp_SeqExplorerOfHSequenceOfXYZ | |
| PColgp_SeqNodeOfHSequenceOfDir | |
| PColgp_SeqNodeOfHSequenceOfPnt | |
| PColgp_SeqNodeOfHSequenceOfVec | |
| PColgp_SeqNodeOfHSequenceOfXYZ | |
| PColgp_VArrayNodeOfFieldOfHArray1OfCirc2d | |
| PColgp_VArrayNodeOfFieldOfHArray1OfDir | |
| PColgp_VArrayNodeOfFieldOfHArray1OfDir2d | |
| PColgp_VArrayNodeOfFieldOfHArray1OfLin2d | |
| PColgp_VArrayNodeOfFieldOfHArray1OfPnt | |
| PColgp_VArrayNodeOfFieldOfHArray1OfPnt2d | |
| PColgp_VArrayNodeOfFieldOfHArray1OfVec | |
| PColgp_VArrayNodeOfFieldOfHArray1OfVec2d | |
| PColgp_VArrayNodeOfFieldOfHArray1OfXY | |
| PColgp_VArrayNodeOfFieldOfHArray1OfXYZ | |
| PColgp_VArrayNodeOfFieldOfHArray2OfCirc2d | |
| PColgp_VArrayNodeOfFieldOfHArray2OfDir | |
| PColgp_VArrayNodeOfFieldOfHArray2OfDir2d | |
| PColgp_VArrayNodeOfFieldOfHArray2OfLin2d | |
| PColgp_VArrayNodeOfFieldOfHArray2OfPnt | |
| PColgp_VArrayNodeOfFieldOfHArray2OfPnt2d | |
| PColgp_VArrayNodeOfFieldOfHArray2OfVec | |
| PColgp_VArrayNodeOfFieldOfHArray2OfVec2d | |
| PColgp_VArrayNodeOfFieldOfHArray2OfXY | |
| PColgp_VArrayNodeOfFieldOfHArray2OfXYZ | |
| PColgp_VArrayTNodeOfFieldOfHArray1OfCirc2d | |
| PColgp_VArrayTNodeOfFieldOfHArray1OfDir | |
| PColgp_VArrayTNodeOfFieldOfHArray1OfDir2d | |
| PColgp_VArrayTNodeOfFieldOfHArray1OfLin2d | |
| PColgp_VArrayTNodeOfFieldOfHArray1OfPnt | |
| PColgp_VArrayTNodeOfFieldOfHArray1OfPnt2d | |
| PColgp_VArrayTNodeOfFieldOfHArray1OfVec | |
| PColgp_VArrayTNodeOfFieldOfHArray1OfVec2d | |
| PColgp_VArrayTNodeOfFieldOfHArray1OfXY | |
| PColgp_VArrayTNodeOfFieldOfHArray1OfXYZ | |
| PColgp_VArrayTNodeOfFieldOfHArray2OfCirc2d | |
| PColgp_VArrayTNodeOfFieldOfHArray2OfDir | |
| PColgp_VArrayTNodeOfFieldOfHArray2OfDir2d | |
| PColgp_VArrayTNodeOfFieldOfHArray2OfLin2d | |
| PColgp_VArrayTNodeOfFieldOfHArray2OfPnt | |
| PColgp_VArrayTNodeOfFieldOfHArray2OfPnt2d | |
| PColgp_VArrayTNodeOfFieldOfHArray2OfVec | |
| PColgp_VArrayTNodeOfFieldOfHArray2OfVec2d | |
| PColgp_VArrayTNodeOfFieldOfHArray2OfXY | |
| PColgp_VArrayTNodeOfFieldOfHArray2OfXYZ | |
| PCollection_HAsciiString | |
| PCollection_HExtendedString | |
| PColStd_FieldOfHArray1OfExtendedString | |
| PColStd_FieldOfHArray1OfInteger | |
| PColStd_FieldOfHArray1OfPersistent | |
| PColStd_FieldOfHArray1OfReal | |
| PColStd_FieldOfHArray2OfInteger | |
| PColStd_FieldOfHArray2OfPersistent | |
| PColStd_FieldOfHArray2OfReal | |
| PColStd_HArray1OfExtendedString | |
| PColStd_HArray1OfInteger | |
| PColStd_HArray1OfPersistent | |
| PColStd_HArray1OfReal | |
| PColStd_HArray2OfInteger | |
| PColStd_HArray2OfPersistent | |
| PColStd_HArray2OfReal | |
| PColStd_VArrayNodeOfFieldOfHArray1OfExtendedString | |
| PColStd_VArrayNodeOfFieldOfHArray1OfInteger | |
| PColStd_VArrayNodeOfFieldOfHArray1OfPersistent | |
| PColStd_VArrayNodeOfFieldOfHArray1OfReal | |
| PColStd_VArrayNodeOfFieldOfHArray2OfInteger | |
| PColStd_VArrayNodeOfFieldOfHArray2OfPersistent | |
| PColStd_VArrayNodeOfFieldOfHArray2OfReal | |
| PColStd_VArrayTNodeOfFieldOfHArray1OfExtendedString | |
| PColStd_VArrayTNodeOfFieldOfHArray1OfInteger | |
| PColStd_VArrayTNodeOfFieldOfHArray1OfPersistent | |
| PColStd_VArrayTNodeOfFieldOfHArray1OfReal | |
| PColStd_VArrayTNodeOfFieldOfHArray2OfInteger | |
| PColStd_VArrayTNodeOfFieldOfHArray2OfPersistent | |
| PColStd_VArrayTNodeOfFieldOfHArray2OfReal | |
| PDataStd_AsciiString | |
| PDataStd_BooleanArray | |
| PDataStd_BooleanList | |
| PDataStd_ByteArray | |
| PDataStd_ByteArray_1 | |
| PDataStd_Comment | |
| PDataStd_Directory | |
| PDataStd_Expression | |
| PDataStd_ExtStringArray | |
| PDataStd_ExtStringArray_1 | |
| PDataStd_ExtStringList | |
| PDataStd_FieldOfHArray1OfByte | |
| PDataStd_FieldOfHArray1OfHArray1OfInteger | |
| PDataStd_FieldOfHArray1OfHArray1OfReal | |
| PDataStd_FieldOfHArray1OfHAsciiString | |
| PDataStd_HArray1OfByte | |
| PDataStd_HArray1OfHArray1OfInteger | |
| PDataStd_HArray1OfHArray1OfReal | |
| PDataStd_HArray1OfHAsciiString | |
| PDataStd_Integer | |
| PDataStd_IntegerArray | |
| PDataStd_IntegerArray_1 | |
| PDataStd_IntegerList | |
| PDataStd_IntPackedMap | |
| PDataStd_IntPackedMap_1 | |
| PDataStd_Name | |
| PDataStd_NamedData | |
| PDataStd_NoteBook | |
| PDataStd_Real | |
| PDataStd_RealArray | |
| PDataStd_RealArray_1 | |
| PDataStd_RealList | |
| PDataStd_ReferenceArray | |
| PDataStd_ReferenceList | |
| PDataStd_Relation | |
| PDataStd_Tick | |
| PDataStd_TreeNode | |
| PDataStd_UAttribute | |
| PDataStd_Variable | |
| PDataStd_VArrayNodeOfFieldOfHArray1OfByte | |
| PDataStd_VArrayNodeOfFieldOfHArray1OfHArray1OfInteger | |
| PDataStd_VArrayNodeOfFieldOfHArray1OfHArray1OfReal | |
| PDataStd_VArrayNodeOfFieldOfHArray1OfHAsciiString | |
| PDataStd_VArrayTNodeOfFieldOfHArray1OfByte | |
| PDataStd_VArrayTNodeOfFieldOfHArray1OfHArray1OfInteger | |
| PDataStd_VArrayTNodeOfFieldOfHArray1OfHArray1OfReal | |
| PDataStd_VArrayTNodeOfFieldOfHArray1OfHAsciiString | |
| PDataXtd_Axis | |
| PDataXtd_Constraint | |
| PDataXtd_Geometry | |
| PDataXtd_PatternStd | |
| PDataXtd_Placement | |
| PDataXtd_Plane | |
| PDataXtd_Point | |
| PDataXtd_Position | |
| PDataXtd_Shape | |
| PDF_Attribute | |
| PDF_Data | |
| PDF_FieldOfHAttributeArray1 | |
| PDF_HAttributeArray1 | |
| PDF_Reference | |
| PDF_TagSource | |
| PDF_VArrayNodeOfFieldOfHAttributeArray1 | |
| PDF_VArrayTNodeOfFieldOfHAttributeArray1 | |
| PDocStd_Document | |
| PDocStd_XLink | |
| PeriodicInterval | |
| PeriodicityInfo | |
| PFunction_Function | |
| PGeom2d_AxisPlacement | |
| PGeom2d_BezierCurve | |
| PGeom2d_BoundedCurve | |
| PGeom2d_BSplineCurve | |
| PGeom2d_CartesianPoint | |
| PGeom2d_Circle | |
| PGeom2d_Conic | |
| PGeom2d_Curve | |
| PGeom2d_Direction | |
| PGeom2d_Ellipse | |
| PGeom2d_Geometry | |
| PGeom2d_Hyperbola | |
| PGeom2d_Line | |
| PGeom2d_OffsetCurve | |
| PGeom2d_Parabola | |
| PGeom2d_Point | |
| PGeom2d_Transformation | |
| PGeom2d_TrimmedCurve | |
| PGeom2d_Vector | |
| PGeom2d_VectorWithMagnitude | |
| PGeom_Axis1Placement | |
| PGeom_Axis2Placement | |
| PGeom_AxisPlacement | |
| PGeom_BezierCurve | |
| PGeom_BezierSurface | |
| PGeom_BoundedCurve | |
| PGeom_BoundedSurface | |
| PGeom_BSplineCurve | |
| PGeom_BSplineSurface | |
| PGeom_CartesianPoint | |
| PGeom_Circle | |
| PGeom_Conic | |
| PGeom_ConicalSurface | |
| PGeom_Curve | |
| PGeom_CylindricalSurface | |
| PGeom_Direction | |
| PGeom_ElementarySurface | |
| PGeom_Ellipse | |
| PGeom_Geometry | |
| PGeom_Hyperbola | |
| PGeom_Line | |
| PGeom_OffsetCurve | |
| PGeom_OffsetSurface | |
| PGeom_Parabola | |
| PGeom_Plane | |
| PGeom_Point | |
| PGeom_RectangularTrimmedSurface | |
| PGeom_SphericalSurface | |
| PGeom_Surface | |
| PGeom_SurfaceOfLinearExtrusion | |
| PGeom_SurfaceOfRevolution | |
| PGeom_SweptSurface | |
| PGeom_ToroidalSurface | |
| PGeom_Transformation | |
| PGeom_TrimmedCurve | |
| PGeom_Vector | |
| PGeom_VectorWithMagnitude | |
| Plate_Array1OfPinpointConstraint | |
| Plate_D1 | Define an order 1 derivatives of a 3d valued function of a 2d variable |
| Plate_D2 | Define an order 2 derivatives of a 3d valued function of a 2d variable |
| Plate_D3 | Define an order 3 derivatives of a 3d valued function of a 2d variable |
| Plate_FreeGtoCConstraint | Define a G1, G2 or G3 constraint on the Plate using weaker constraint than GtoCConstraint |
| Plate_GlobalTranslationConstraint | Force a set of UV points to translate without deformation |
| Plate_GtoCConstraint | Define a G1, G2 or G3 constraint on the Plate |
| Plate_HArray1OfPinpointConstraint | |
| Plate_LinearScalarConstraint | Define on or several constraints as linear combination of the X,Y and Z components of a set of PinPointConstraint |
| Plate_LinearXYZConstraint | Define on or several constraints as linear combination of PinPointConstraint unlike the LinearScalarConstraint, usage of this kind of constraint preserve the X,Y and Z uncoupling |
| Plate_LineConstraint | Constraint a point to belong to a straight line |
| Plate_PinpointConstraint | Define a constraint on the Plate |
| Plate_PlaneConstraint | Constraint a point to belong to a Plane |
| Plate_Plate | This class implement a variationnal spline algorithm able to define a two variable function satisfying some constraints and minimizing an energy like criterion |
| Plate_SampledCurveConstraint | Define m PinPointConstraint driven by m unknown |
| Plate_SequenceNodeOfSequenceOfLinearScalarConstraint | |
| Plate_SequenceNodeOfSequenceOfLinearXYZConstraint | |
| Plate_SequenceNodeOfSequenceOfPinpointConstraint | |
| Plate_SequenceOfLinearScalarConstraint | |
| Plate_SequenceOfLinearXYZConstraint | |
| Plate_SequenceOfPinpointConstraint | |
| PLib | PLib means Polynomial functions library. This pk provides basic computation functions for polynomial functions |
| PLib_Base | To work with different polynomial's Bases |
| PLib_DoubleJacobiPolynomial | |
| PLib_HermitJacobi | This class provides method to work with Jacobi Polynomials relativly to an order of constraint q = myWorkDegree-2*(myNivConstr+1) Jk(t) for k=0,q compose the Jacobi Polynomial base relativly to the weigth W(t) iorder is the integer value for the constraints: iorder = 0 <=> ConstraintOrder = GeomAbs_C0 iorder = 1 <=> ConstraintOrder = GeomAbs_C1 iorder = 2 <=> ConstraintOrder = GeomAbs_C2 P(t) = H(t) + W(t) * Q(t) Where W(t) = (1-t**2)**(2*iordre+2) the coefficients JacCoeff represents P(t) JacCoeff are stored as follow: |
| PLib_JacobiPolynomial | This class provides method to work with Jacobi Polynomials relativly to an order of constraint q = myWorkDegree-2*(myNivConstr+1) Jk(t) for k=0,q compose the Jacobi Polynomial base relativly to the weigth W(t) iorder is the integer value for the constraints: iorder = 0 <=> ConstraintOrder = GeomAbs_C0 iorder = 1 <=> ConstraintOrder = GeomAbs_C1 iorder = 2 <=> ConstraintOrder = GeomAbs_C2 P(t) = R(t) + W(t) * Q(t) Where W(t) = (1-t**2)**(2*iordre+2) the coefficients JacCoeff represents P(t) JacCoeff are stored as follow: |
| Plugin | |
| Plugin_DataMapIteratorOfMapOfFunctions | |
| Plugin_DataMapNodeOfMapOfFunctions | |
| Plugin_MapOfFunctions | |
| PMMgt_PManaged | |
| PNaming_FieldOfHArray1OfNamedShape | |
| PNaming_HArray1OfNamedShape | |
| PNaming_Name | |
| PNaming_Name_1 | |
| PNaming_Name_2 | |
| PNaming_NamedShape | |
| PNaming_Naming | |
| PNaming_Naming_1 | |
| PNaming_Naming_2 | |
| PNaming_VArrayNodeOfFieldOfHArray1OfNamedShape | |
| PNaming_VArrayTNodeOfFieldOfHArray1OfNamedShape | |
| point3 | |
| Poly | This package provides classes and services to handle : |
| Poly_Array1OfTriangle | |
| Poly_CoherentLink | |
| Poly_CoherentNode | |
| Poly_CoherentTriangle | |
| Poly_CoherentTriangulation | |
| Poly_CoherentTriPtr | |
| Poly_Connect | Provides an algorithm to explore, inside a triangulation, the adjacency data for a node or a triangle. Adjacency data for a node consists of triangles which contain the node. Adjacency data for a triangle consists of: |
| Poly_HArray1OfTriangle | |
| Poly_MakeLoops | |
| Poly_MakeLoops2D | |
| Poly_MakeLoops3D | |
| Poly_Polygon2D | Provides a polygon in 2D space (for example, in the parametric space of a surface). It is generally an approximate representation of a curve. A Polygon2D is defined by a table of nodes. Each node is a 2D point. If the polygon is closed, the point of closure is repeated at the end of the table of nodes |
| Poly_Polygon3D | This class Provides a polygon in 3D space. It is generally an approximate representation of a curve. A Polygon3D is defined by a table of nodes. Each node is a 3D point. If the polygon is closed, the point of closure is repeated at the end of the table of nodes. If the polygon is an approximate representation of a curve, you can associate with each of its nodes the value of the parameter of the corresponding point on the curve |
| Poly_PolygonOnTriangulation | This class provides a polygon in 3D space, based on the triangulation of a surface. It may be the approximate representation of a curve on the surface, or more generally the shape. A PolygonOnTriangulation is defined by a table of nodes. Each node is an index in the table of nodes specific to a triangulation, and represents a point on the surface. If the polygon is closed, the index of the point of closure is repeated at the end of the table of nodes. If the polygon is an approximate representation of a curve on a surface, you can associate with each of its nodes the value of the parameter of the corresponding point on the curve.represents a 3d Polygon |
| Poly_Triangle | Describes a component triangle of a triangulation (Poly_Triangulation object). A Triangle is defined by a triplet of nodes. Each node is an index in the table of nodes specific to an existing triangulation of a shape, and represents a point on the surface |
| Poly_Triangulation | Provides a triangulation for a surface, a set of surfaces, or more generally a shape. A triangulation consists of an approximate representation of the actual shape, using a collection of points and triangles. The points are located on the surface. The edges of the triangles connect adjacent points with a straight line that approximates the true curve on the surface. A triangulation comprises: |
| PPoly_FieldOfHArray1OfTriangle | |
| PPoly_HArray1OfTriangle | |
| PPoly_Polygon2D | |
| PPoly_Polygon3D | |
| PPoly_PolygonOnTriangulation | |
| PPoly_Triangle | A Triangle is a triplet of node indices |
| PPoly_Triangulation | |
| PPoly_VArrayNodeOfFieldOfHArray1OfTriangle | |
| PPoly_VArrayTNodeOfFieldOfHArray1OfTriangle | |
| PPrsStd_AISPresentation | |
| PPrsStd_AISPresentation_1 | |
| Precision | The Precision package offers a set of functions defining precision criteria for use in conventional situations when comparing two numbers. Generalities It is not advisable to use floating number equality. Instead, the difference between numbers must be compared with a given precision, i.e. : Standard_Real x1, x2 ; x1 = ... x2 = ... If ( x1 == x2 ) ... should not be used and must be written as indicated below: Standard_Real x1, x2 ; Standard_Real Precision = ... x1 = ... x2 = ... If ( Abs ( x1 - x2 ) < Precision ) ... Likewise, when ordering floating numbers, you must take the following into account : Standard_Real x1, x2 ; Standard_Real Precision = ... x1 = ... ! a large number x2 = ... ! another large number If ( x1 < x2 - Precision ) ... is incorrect when x1 and x2 are large numbers ; it is better to write : Standard_Real x1, x2 ; Standard_Real Precision = ... x1 = ... ! a large number x2 = ... ! another large number If ( x2 - x1 > Precision ) ... Precision in Cas.Cade Generally speaking, the precision criterion is not implicit in Cas.Cade. Low-level geometric algorithms accept precision criteria as arguments. As a rule, they should not refer directly to the precision criteria provided by the Precision package. On the other hand, high-level modeling algorithms have to provide the low-level geometric algorithms that they call, with a precision criteria. One way of doing this is to use the above precision criteria. Alternatively, the high-level algorithms can have their own system for precision management. For example, the Topology Data Structure stores precision criteria for each elementary shape (as a vertex, an edge or a face). When a new topological object is constructed, the precision criteria are taken from those provided by the Precision package, and stored in the related data structure. Later, a topological algorithm which analyses these objects will work with the values stored in the data structure. Also, if this algorithm is to build a new topological object, from these precision criteria, it will compute a new precision criterion for the new topological object, and write it into the data structure of the new topological object. The different precision criteria offered by the Precision package, cover the most common requirements of geometric algorithms, such as intersections, approximations, and so on. The choice of precision depends on the algorithm and on the geometric space. The geometric space may be : |
| ProjLib | The projLib package first provides projection of curves on a plane along a given Direction. The result will be a 3D curve. The ProjLib package provides projection of curves on surfaces to compute the curve in the parametric space |
| ProjLib_CompProjectedCurve | |
| ProjLib_ComputeApprox | Approximate the projection of a 3d curve on an analytic surface and stores the result in Approx. The result is a 2d curve |
| ProjLib_ComputeApproxOnPolarSurface | Approximate the projection of a 3d curve on an polar surface and stores the result in Approx. The result is a 2d curve. The evaluation of the current point of the 2d curve is done with the evaluation of the extrema P3d - Surface |
| ProjLib_Cone | Projects elementary curves on a cone |
| ProjLib_Cylinder | Projects elementary curves on a cylinder |
| ProjLib_HCompProjectedCurve | |
| ProjLib_HProjectedCurve | |
| ProjLib_HSequenceOfHSequenceOfPnt | |
| ProjLib_Plane | Projects elementary curves on a plane |
| ProjLib_PrjFunc | |
| ProjLib_PrjResolve | |
| ProjLib_ProjectedCurve | Compute the 2d-curve. Try to solve the particular case if possible. Otherwize, an approximation is done |
| ProjLib_ProjectOnPlane | Class used to project a 3d curve on a plane. The result will be a 3d curve |
| ProjLib_ProjectOnSurface | Project a curve on a surface. The result ( a 3D Curve) will be an approximation |
| ProjLib_Projector | Root class for projection algorithms, stores the result |
| ProjLib_SequenceNodeOfSequenceOfHSequenceOfPnt | |
| ProjLib_SequenceOfHSequenceOfPnt | |
| ProjLib_Sphere | Projects elementary curves on a sphere |
| ProjLib_Torus | Projects elementary curves on a torus |
| Prs3d | The Prs3d package provides the following services |
| Prs3d_Arrow | Class methods to draw an arrow at a given location, along a given direction and using a given angle |
| Prs3d_ArrowAspect | A framework for displaying arrows in representations of dimensions and relations |
| Prs3d_BasicAspect | All basic Prs3d_xxxAspect must inherits from this class The aspect classes qualifies how to represent a given kind of object |
| Prs3d_DatumAspect | A framework to define the display of datums |
| Prs3d_DimensionAspect | Defines the attributes when drawing a Length Presentation |
| Prs3d_DimensionUnits | This class provides units for two dimension groups: |
| Prs3d_Drawer | A graphic attribute manager which governs how objects such as color, width, line thickness and deflection are displayed. A drawer includes an instance of the Aspect classes with particular default values |
| Prs3d_IsoAspect | A framework to define the display attributes of isoparameters. This framework can be used to modify the default setting for isoparameters in Prs3d_Drawer |
| Prs3d_LineAspect | A framework for defining how a line will be displayed in a presentation. Aspects of line display include width, color and type of line. The definition set by this class is then passed to the attribute manager Prs3d_Drawer. Any object which requires a value for line aspect as an argument may then be given the attribute manager as a substitute argument in the form of a field such as myDrawer for example |
| Prs3d_PlaneAspect | A framework to define the display of planes |
| Prs3d_PlaneSet | Defines a set of planes used for a presentation by sections |
| Prs3d_Point | |
| Prs3d_PointAspect | This class defines attributes for the points The points are drawn using markers, whose size does not depend on the zoom value of the views |
| Prs3d_Presentation | Defines a presentation object which can be displayed, highlighted or erased. The presentation object stores the results of the presentation algorithms as defined in the StdPrs classes and the Prs3d classes inheriting Prs3d_Root. This presentation object is used to give display attributes defined at this level to ApplicationInteractiveServices classes at the level above. A presentation object is attached to a given Viewer |
| Prs3d_PresentationShadow | Defines a "shadow" of existing presentation object with custom aspects |
| Prs3d_Projector | A projector object. This object defines the parameters of a view for a visualization algorithm. It is, for example, used by the hidden line removal algorithms |
| Prs3d_Root | A root class for the standard presentation algorithms of the StdPrs package |
| Prs3d_ShadingAspect | A framework to define the display of shading. The attributes which make up this definition include: |
| Prs3d_ShapeTool | Describes the behaviour requested for a wireframe shape presentation |
| Prs3d_Text | A framework to define the display of texts |
| Prs3d_TextAspect | Defines the attributes when displaying a text |
| Prs3d_WFShape | |
| PrsMgr_ModedPresentation | |
| PrsMgr_PresentableObject | A framework to supply the Graphic3d structure of the object to be presented. On the first display request, this structure is created by calling the appropriate algorithm and retaining this frameworkfor further display. This abstract framework is inherited in Application Interactive Services (AIS), notably in: |
| PrsMgr_Presentation | |
| PrsMgr_PresentationManager | A framework to manage 3D displays, graphic entities and their updates. Used in the AIS package (Application Interactive Services), to enable the advanced user to define the default display mode of a new interactive object which extends the list of signatures and types. Definition of new display types is handled by calling the presentation algorithms provided by the StdPrs package |
| PrsMgr_Presentations | |
| PrsMgr_Prs | |
| PrsMgr_SequenceNodeOfPresentations | |
| PShort_FieldOfHArray1OfShortReal | |
| PShort_FieldOfHArray2OfShortReal | |
| PShort_HArray1OfShortReal | |
| PShort_HArray2OfShortReal | |
| PShort_HSequenceOfShortReal | |
| PShort_SeqExplorerOfHSequenceOfShortReal | |
| PShort_SeqNodeOfHSequenceOfShortReal | |
| PShort_VArrayNodeOfFieldOfHArray1OfShortReal | |
| PShort_VArrayNodeOfFieldOfHArray2OfShortReal | |
| PShort_VArrayTNodeOfFieldOfHArray1OfShortReal | |
| PShort_VArrayTNodeOfFieldOfHArray2OfShortReal | |
| PSO_Particle | Describes particle pool for using in PSO algorithm. Indexes: 0 <= aDimidx <= myDimensionCount - 1 |
| PStandard_ArrayNode | |
| PTColStd_DataMapIteratorOfPersistentTransientMap | |
| PTColStd_DataMapIteratorOfTransientPersistentMap | |
| PTColStd_DataMapNodeOfPersistentTransientMap | |
| PTColStd_DataMapNodeOfTransientPersistentMap | |
| PTColStd_DoubleMapIteratorOfDoubleMapOfTransientPersistent | |
| PTColStd_DoubleMapNodeOfDoubleMapOfTransientPersistent | |
| PTColStd_DoubleMapOfTransientPersistent | |
| PTColStd_MapPersistentHasher | |
| PTColStd_PersistentTransientMap | |
| PTColStd_TransientPersistentMap | |
| PTopLoc_Datum3D | |
| PTopLoc_ItemLocation | |
| PTopLoc_Location | A Storable composed local coordinate system. Made with local coordinate systems raised to power elevation |
| PTopoDS_Compound | |
| PTopoDS_CompSolid | |
| PTopoDS_Edge | |
| PTopoDS_Face | |
| PTopoDS_FieldOfHArray1OfHShape | |
| PTopoDS_FieldOfHArray1OfShape1 | |
| PTopoDS_HArray1OfHShape | |
| PTopoDS_HArray1OfShape1 | |
| PTopoDS_HShape | |
| PTopoDS_Shape1 | The PTopoDS_Shape1 is the Persistent view of a TopoDS_Shape |
| PTopoDS_Shell | |
| PTopoDS_Solid | |
| PTopoDS_TCompound | |
| PTopoDS_TCompound1 | |
| PTopoDS_TCompSolid | |
| PTopoDS_TCompSolid1 | |
| PTopoDS_TEdge | |
| PTopoDS_TEdge1 | |
| PTopoDS_TFace | |
| PTopoDS_TFace1 | |
| PTopoDS_TShape | |
| PTopoDS_TShape1 | |
| PTopoDS_TShell | |
| PTopoDS_TShell1 | |
| PTopoDS_TSolid | |
| PTopoDS_TSolid1 | |
| PTopoDS_TVertex | |
| PTopoDS_TVertex1 | |
| PTopoDS_TWire | |
| PTopoDS_TWire1 | |
| PTopoDS_VArrayNodeOfFieldOfHArray1OfHShape | |
| PTopoDS_VArrayNodeOfFieldOfHArray1OfShape1 | |
| PTopoDS_VArrayTNodeOfFieldOfHArray1OfHShape | |
| PTopoDS_VArrayTNodeOfFieldOfHArray1OfShape1 | |
| PTopoDS_Vertex | |
| PTopoDS_Wire | |
| PXCAFDoc_Area | |
| PXCAFDoc_Centroid | |
| PXCAFDoc_Color | |
| PXCAFDoc_ColorTool | |
| PXCAFDoc_Datum | |
| PXCAFDoc_DimTol | |
| PXCAFDoc_DimTolTool | |
| PXCAFDoc_DocumentTool | |
| PXCAFDoc_GraphNode | |
| PXCAFDoc_GraphNodeSequence | |
| PXCAFDoc_LayerTool | |
| PXCAFDoc_Location | |
| PXCAFDoc_Material | |
| PXCAFDoc_MaterialTool | |
| PXCAFDoc_SeqExplorerOfGraphNodeSequence | |
| PXCAFDoc_SeqNodeOfGraphNodeSequence | |
| PXCAFDoc_ShapeTool | |
| PXCAFDoc_Volume | |
| QABugs | |
| QABugs_MyText | |
| QABugs_PresentableObject | |
| QADNaming | |
| QADraw | |
| QANCollection | |
| QANCollection_DataMapIteratorOfDataMapOfRealPnt | |
| QANCollection_DataMapNodeOfDataMapOfRealPnt | |
| QANCollection_DataMapOfRealPnt | |
| QANCollection_DoubleMapIteratorOfDoubleMapOfRealInteger | |
| QANCollection_DoubleMapNodeOfDoubleMapOfRealInteger | |
| QANCollection_DoubleMapOfRealInteger | |
| QANCollection_IndexedDataMapNodeOfIndexedDataMapOfRealPnt | |
| QANCollection_IndexedDataMapOfRealPnt | |
| QANCollection_ListIteratorOfListOfPnt | |
| QANCollection_ListNodeOfListOfPnt | |
| QANCollection_ListOfPnt | |
| QANewBRepNaming | Implements methods to load the Make Shape operations in the naming data-structure (package TNaming), which provides topological naming facilities. Shape generation, modifications and deletions are recorded in the data-framework (package TDF) using the builder from package TNaming |
| QANewBRepNaming_BooleanOperation | To load the BooleanOperation results |
| QANewBRepNaming_BooleanOperationFeat | To load the BooleanOperationFeat results |
| QANewBRepNaming_Box | To load the Box results |
| QANewBRepNaming_Chamfer | To load the Chamfer results |
| QANewBRepNaming_Common | |
| QANewBRepNaming_Cut | |
| QANewBRepNaming_Cylinder | To load the Cylinder results |
| QANewBRepNaming_Fillet | For topological naming of a fillet |
| QANewBRepNaming_Fuse | |
| QANewBRepNaming_Gluing | Loads a result of Gluing operation in Data Framework |
| QANewBRepNaming_ImportShape | This class provides a topological naming of a Shape |
| QANewBRepNaming_Intersection | |
| QANewBRepNaming_Limitation | |
| QANewBRepNaming_Loader | |
| QANewBRepNaming_LoaderParent | |
| QANewBRepNaming_Prism | To load the Prism results |
| QANewBRepNaming_Revol | To load the Revol results |
| QANewBRepNaming_Sphere | To load the Sphere results |
| QANewBRepNaming_TopNaming | The root class for all the primitives, features, .. |
| QANewDBRepNaming | To test topological naming |
| QANewModTopOpe | QANewModTopOpe package provides classes for limitation, gluing and removing "floating" shapes |
| QANewModTopOpe_Glue | Perform the gluing topological operation (topological sewing of two topological objects) |
| QANewModTopOpe_Intersection | intersection of two shapes; |
| QANewModTopOpe_Limitation | cutting shape by face or shell; |
| QANewModTopOpe_ReShaper | To remove "floating" objects from compound. "floating" objects are wires, edges, vertices that do not belong solids, shells or faces |
| QANewModTopOpe_Tools | To provide several tools for porting to OCC 5.0 (mkk) |
| Quantity_Array1OfCoefficient | |
| Quantity_Array1OfColor | |
| Quantity_Array2OfColor | |
| Quantity_Color | This class allows the definition of a colour. The names of the colours are from the X11 specification. color object may be used for numerous applicative purposes. A color is defined by: |
| Quantity_Convert | Services to manage units conversion between Front-ends and Engines. This conversion is managed by a table of correspondance between the quantities and their "conversion coefficient". This table is implemented like an external array (TCollection_Array1) regarding to the quantities enumeration |
| Quantity_Date | This class provides services to manage date information. A date represents the following time intervals: year, month, day, hour, minute, second, millisecond and microsecond. Current time is expressed in elapsed seconds and microseconds beginning from 00:00 GMT, January 1, 1979 (zero hour). The valid date can only be later than this one. Note: a Period object gives the interval between two dates |
| Quantity_HArray1OfColor | |
| Quantity_Period | Manages date intervals. For example, a Period object gives the interval between two dates. A period is expressed in seconds and microseconds |
| Resource_DataMapIteratorOfDataMapOfAsciiStringAsciiString | |
| Resource_DataMapIteratorOfDataMapOfAsciiStringExtendedString | |
| Resource_DataMapNodeOfDataMapOfAsciiStringAsciiString | |
| Resource_DataMapNodeOfDataMapOfAsciiStringExtendedString | |
| Resource_DataMapOfAsciiStringAsciiString | |
| Resource_DataMapOfAsciiStringExtendedString | |
| Resource_LexicalCompare | |
| Resource_Manager | Defines a resource structure and its management methods |
| Resource_QuickSortOfArray1 | |
| Resource_Unicode | This class provides functions used to convert a non-ASCII C string given in ANSI, EUC, GB or SJIS format, to a Unicode string of extended characters, and vice versa |
| RWHeaderSection | |
| RWHeaderSection_GeneralModule | Defines General Services for HeaderSection Entities (Share,Check,Copy; Trace already inherited) Depends (for case numbers) of Protocol from HeaderSection |
| RWHeaderSection_ReadWriteModule | General module to read and write HeaderSection entities |
| RWHeaderSection_RWFileDescription | Read & Write Module for FileDescription |
| RWHeaderSection_RWFileName | Read & Write Module for FileName |
| RWHeaderSection_RWFileSchema | Read & Write Module for FileSchema |
| RWStepAP203_RWCcDesignApproval | Read & Write tool for CcDesignApproval |
| RWStepAP203_RWCcDesignCertification | Read & Write tool for CcDesignCertification |
| RWStepAP203_RWCcDesignContract | Read & Write tool for CcDesignContract |
| RWStepAP203_RWCcDesignDateAndTimeAssignment | Read & Write tool for CcDesignDateAndTimeAssignment |
| RWStepAP203_RWCcDesignPersonAndOrganizationAssignment | Read & Write tool for CcDesignPersonAndOrganizationAssignment |
| RWStepAP203_RWCcDesignSecurityClassification | Read & Write tool for CcDesignSecurityClassification |
| RWStepAP203_RWCcDesignSpecificationReference | Read & Write tool for CcDesignSpecificationReference |
| RWStepAP203_RWChange | Read & Write tool for Change |
| RWStepAP203_RWChangeRequest | Read & Write tool for ChangeRequest |
| RWStepAP203_RWStartRequest | Read & Write tool for StartRequest |
| RWStepAP203_RWStartWork | Read & Write tool for StartWork |
| RWStepAP214 | |
| RWStepAP214_GeneralModule | Defines General Services for StepAP214 Entities (Share,Check,Copy; Trace already inherited) Depends (for case numbers) of Protocol from StepAP214 |
| RWStepAP214_ReadWriteModule | General module to read and write StepAP214 entities |
| RWStepAP214_RWAppliedApprovalAssignment | Read & Write Module for AppliedApprovalAssignment |
| RWStepAP214_RWAppliedDateAndTimeAssignment | Read & Write Module for AppliedDateAndTimeAssignment |
| RWStepAP214_RWAppliedDateAssignment | Read & Write Module for AppliedDateAssignment |
| RWStepAP214_RWAppliedDocumentReference | Read & Write Module for AppliedDocumentReference |
| RWStepAP214_RWAppliedExternalIdentificationAssignment | Read & Write tool for AppliedExternalIdentificationAssignment |
| RWStepAP214_RWAppliedGroupAssignment | Read & Write tool for AppliedGroupAssignment |
| RWStepAP214_RWAppliedOrganizationAssignment | Read & Write Module for AppliedOrganizationAssignment |
| RWStepAP214_RWAppliedPersonAndOrganizationAssignment | Read & Write Module for AppliedPersonAndOrganizationAssignment |
| RWStepAP214_RWAppliedPresentedItem | Read & Write Module for AppliedPresentedItem |
| RWStepAP214_RWAppliedSecurityClassificationAssignment | |
| RWStepAP214_RWAutoDesignActualDateAndTimeAssignment | Read & Write Module for AutoDesignActualDateAndTimeAssignment |
| RWStepAP214_RWAutoDesignActualDateAssignment | Read & Write Module for AutoDesignActualDateAssignment |
| RWStepAP214_RWAutoDesignApprovalAssignment | Read & Write Module for AutoDesignApprovalAssignment |
| RWStepAP214_RWAutoDesignDateAndPersonAssignment | Read & Write Module for AutoDesignDateAndPersonAssignment |
| RWStepAP214_RWAutoDesignDocumentReference | Read & Write Module for AutoDesignDocumentReference |
| RWStepAP214_RWAutoDesignGroupAssignment | Read & Write Module for AutoDesignGroupAssignment |
| RWStepAP214_RWAutoDesignNominalDateAndTimeAssignment | Read & Write Module for AutoDesignNominalDateAndTimeAssignment |
| RWStepAP214_RWAutoDesignNominalDateAssignment | Read & Write Module for AutoDesignNominalDateAssignment |
| RWStepAP214_RWAutoDesignOrganizationAssignment | Read & Write Module for AutoDesignOrganizationAssignment |
| RWStepAP214_RWAutoDesignPersonAndOrganizationAssignment | Read & Write Module for AutoDesignPersonAndOrganizationAssignment |
| RWStepAP214_RWAutoDesignPresentedItem | Read & Write Module for AutoDesignPresentedItem |
| RWStepAP214_RWAutoDesignSecurityClassificationAssignment | Read & Write Module for AutoDesignSecurityClassificationAssignment |
| RWStepAP214_RWClass | Read & Write tool for Class |
| RWStepAP214_RWExternallyDefinedClass | Read & Write tool for ExternallyDefinedClass |
| RWStepAP214_RWExternallyDefinedGeneralProperty | Read & Write tool for ExternallyDefinedGeneralProperty |
| RWStepAP214_RWRepItemGroup | Read & Write tool for RepItemGroup |
| RWStepBasic_RWAction | Read & Write tool for Action |
| RWStepBasic_RWActionAssignment | Read & Write tool for ActionAssignment |
| RWStepBasic_RWActionMethod | Read & Write tool for ActionMethod |
| RWStepBasic_RWActionRequestAssignment | Read & Write tool for ActionRequestAssignment |
| RWStepBasic_RWActionRequestSolution | Read & Write tool for ActionRequestSolution |
| RWStepBasic_RWAddress | Read & Write Module for Address |
| RWStepBasic_RWApplicationContext | Read & Write Module for ApplicationContext |
| RWStepBasic_RWApplicationContextElement | Read & Write Module for ApplicationContextElement |
| RWStepBasic_RWApplicationProtocolDefinition | Read & Write Module for ApplicationProtocolDefinition |
| RWStepBasic_RWApproval | Read & Write Module for Approval |
| RWStepBasic_RWApprovalDateTime | Read & Write Module for ApprovalDateTime |
| RWStepBasic_RWApprovalPersonOrganization | Read & Write Module for ApprovalPersonOrganization |
| RWStepBasic_RWApprovalRelationship | Read & Write Module for ApprovalRelationship |
| RWStepBasic_RWApprovalRole | Read & Write Module for ApprovalRole |
| RWStepBasic_RWApprovalStatus | Read & Write Module for ApprovalStatus |
| RWStepBasic_RWCalendarDate | Read & Write Module for CalendarDate |
| RWStepBasic_RWCertification | Read & Write tool for Certification |
| RWStepBasic_RWCertificationAssignment | Read & Write tool for CertificationAssignment |
| RWStepBasic_RWCertificationType | Read & Write tool for CertificationType |
| RWStepBasic_RWCharacterizedObject | Read & Write tool for CharacterizedObject |
| RWStepBasic_RWContract | Read & Write tool for Contract |
| RWStepBasic_RWContractAssignment | Read & Write tool for ContractAssignment |
| RWStepBasic_RWContractType | Read & Write tool for ContractType |
| RWStepBasic_RWConversionBasedUnit | Read & Write Module for ConversionBasedUnit |
| RWStepBasic_RWConversionBasedUnitAndAreaUnit | Read & Write Module for RWConversionBasedUnitAndAreaUnit |
| RWStepBasic_RWConversionBasedUnitAndLengthUnit | Read & Write Module for ConversionBasedUnitAndLengthUnit |
| RWStepBasic_RWConversionBasedUnitAndMassUnit | Read & Write Module for ConversionBasedUnitAndMassUnit |
| RWStepBasic_RWConversionBasedUnitAndPlaneAngleUnit | Read & Write Module for ConversionBasedUnitAndPlaneAngleUnit |
| RWStepBasic_RWConversionBasedUnitAndRatioUnit | Read & Write Module for ConversionBasedUnitAndRatioUnit |
| RWStepBasic_RWConversionBasedUnitAndSolidAngleUnit | Read & Write Module for ConversionBasedUnitAndSolidAngleUnit |
| RWStepBasic_RWConversionBasedUnitAndTimeUnit | Read & Write Module for ConversionBasedUnitAndTimeUnit |
| RWStepBasic_RWConversionBasedUnitAndVolumeUnit | Read & Write Module for ConversionBasedUnitAndVolumeUnit |
| RWStepBasic_RWCoordinatedUniversalTimeOffset | Read & Write Module for CoordinatedUniversalTimeOffset |
| RWStepBasic_RWDate | Read & Write Module for Date |
| RWStepBasic_RWDateAndTime | Read & Write Module for DateAndTime |
| RWStepBasic_RWDateRole | Read & Write Module for DateRole |
| RWStepBasic_RWDateTimeRole | Read & Write Module for DateTimeRole |
| RWStepBasic_RWDerivedUnit | Read & Write Module for DerivedUnit |
| RWStepBasic_RWDerivedUnitElement | Read & Write Module for DerivedUnitElement |
| RWStepBasic_RWDimensionalExponents | Read & Write Module for DimensionalExponents |
| RWStepBasic_RWDocument | Read & Write tool for Document |
| RWStepBasic_RWDocumentFile | Read & Write tool for DocumentFile |
| RWStepBasic_RWDocumentProductAssociation | Read & Write tool for DocumentProductAssociation |
| RWStepBasic_RWDocumentProductEquivalence | Read & Write tool for DocumentProductEquivalence |
| RWStepBasic_RWDocumentRelationship | Read & Write Module for DocumentRelationship |
| RWStepBasic_RWDocumentRepresentationType | Read & Write tool for DocumentRepresentationType |
| RWStepBasic_RWDocumentType | Read & Write Module for DocumentType |
| RWStepBasic_RWDocumentUsageConstraint | Read & Write Module for DocumentUsageConstraint |
| RWStepBasic_RWEffectivity | Read & Write Module for Effectivity |
| RWStepBasic_RWEffectivityAssignment | Read & Write tool for EffectivityAssignment |
| RWStepBasic_RWEulerAngles | Read & Write tool for EulerAngles |
| RWStepBasic_RWExternalIdentificationAssignment | Read & Write tool for ExternalIdentificationAssignment |
| RWStepBasic_RWExternallyDefinedItem | Read & Write tool for ExternallyDefinedItem |
| RWStepBasic_RWExternalSource | Read & Write tool for ExternalSource |
| RWStepBasic_RWGeneralProperty | Read & Write tool for GeneralProperty |
| RWStepBasic_RWGroup | Read & Write tool for Group |
| RWStepBasic_RWGroupAssignment | Read & Write tool for GroupAssignment |
| RWStepBasic_RWGroupRelationship | Read & Write tool for GroupRelationship |
| RWStepBasic_RWIdentificationAssignment | Read & Write tool for IdentificationAssignment |
| RWStepBasic_RWIdentificationRole | Read & Write tool for IdentificationRole |
| RWStepBasic_RWLengthMeasureWithUnit | Read & Write Module for LengthMeasureWithUnit |
| RWStepBasic_RWLengthUnit | Read & Write Module for LengthUnit |
| RWStepBasic_RWLocalTime | Read & Write Module for LocalTime |
| RWStepBasic_RWMassMeasureWithUnit | Read & Write Module for MassMeasureWithUnit |
| RWStepBasic_RWMassUnit | Read & Write tool for MassUnit |
| RWStepBasic_RWMeasureWithUnit | Read & Write Module for MeasureWithUnit |
| RWStepBasic_RWMechanicalContext | Read & Write Module for MechanicalContext |
| RWStepBasic_RWNameAssignment | Read & Write tool for NameAssignment |
| RWStepBasic_RWNamedUnit | Read & Write Module for NamedUnit |
| RWStepBasic_RWObjectRole | Read & Write tool for ObjectRole |
| RWStepBasic_RWOrdinalDate | Read & Write Module for OrdinalDate |
| RWStepBasic_RWOrganization | Read & Write Module for Organization |
| RWStepBasic_RWOrganizationalAddress | Read & Write Module for OrganizationalAddress |
| RWStepBasic_RWOrganizationRole | Read & Write Module for OrganizationRole |
| RWStepBasic_RWPerson | Read & Write Module for Person |
| RWStepBasic_RWPersonalAddress | Read & Write Module for PersonalAddress |
| RWStepBasic_RWPersonAndOrganization | Read & Write Module for PersonAndOrganization |
| RWStepBasic_RWPersonAndOrganizationRole | Read & Write Module for PersonAndOrganizationRole |
| RWStepBasic_RWPlaneAngleMeasureWithUnit | Read & Write Module for PlaneAngleMeasureWithUnit |
| RWStepBasic_RWPlaneAngleUnit | Read & Write Module for PlaneAngleUnit |
| RWStepBasic_RWProduct | Read & Write Module for Product |
| RWStepBasic_RWProductCategory | Read & Write Module for ProductCategory |
| RWStepBasic_RWProductCategoryRelationship | Read & Write tool for ProductCategoryRelationship |
| RWStepBasic_RWProductConceptContext | Read & Write tool for ProductConceptContext |
| RWStepBasic_RWProductContext | Read & Write Module for ProductContext |
| RWStepBasic_RWProductDefinition | Read & Write Module for ProductDefinition |
| RWStepBasic_RWProductDefinitionContext | Read & Write Module for ProductDefinitionContext |
| RWStepBasic_RWProductDefinitionEffectivity | Read & Write Module for ProductDefinitionEffectivity |
| RWStepBasic_RWProductDefinitionFormation | Read & Write Module for ProductDefinitionFormation |
| RWStepBasic_RWProductDefinitionFormationRelationship | Read & Write tool for ProductDefinitionFormationRelationship |
| RWStepBasic_RWProductDefinitionFormationWithSpecifiedSource | Read & Write Module for ProductDefinitionFormationWithSpecifiedSource |
| RWStepBasic_RWProductDefinitionRelationship | Read & Write tool for ProductDefinitionRelationship |
| RWStepBasic_RWProductDefinitionWithAssociatedDocuments | Read & Write Module for ProductDefinitionWithAssociatedDocuments |
| RWStepBasic_RWProductRelatedProductCategory | Read & Write Module for ProductRelatedProductCategory |
| RWStepBasic_RWProductType | Read & Write Module for ProductType |
| RWStepBasic_RWRatioMeasureWithUnit | Read & Write Module for RatioMeasureWithUnit |
| RWStepBasic_RWRoleAssociation | Read & Write tool for RoleAssociation |
| RWStepBasic_RWSecurityClassification | Read & Write Module for SecurityClassification |
| RWStepBasic_RWSecurityClassificationLevel | Read & Write Module for SecurityClassificationLevel |
| RWStepBasic_RWSiUnit | Read & Write Module for SiUnit |
| RWStepBasic_RWSiUnitAndAreaUnit | Read & Write Module for SiUnitAndAreaUnit |
| RWStepBasic_RWSiUnitAndLengthUnit | Read & Write Module for SiUnitAndLengthUnit |
| RWStepBasic_RWSiUnitAndMassUnit | Read & Write Module for SiUnitAndMassUnit |
| RWStepBasic_RWSiUnitAndPlaneAngleUnit | Read & Write Module for SiUnitAndPlaneAngleUnit |
| RWStepBasic_RWSiUnitAndRatioUnit | Read & Write Module for SiUnitAndRatioUnit |
| RWStepBasic_RWSiUnitAndSolidAngleUnit | Read & Write Module for SiUnitAndSolidAngleUnit |
| RWStepBasic_RWSiUnitAndThermodynamicTemperatureUnit | Read & Write Module for SiUnitAndThermodynamicTemperatureUnit |
| RWStepBasic_RWSiUnitAndTimeUnit | Read & Write Module for SiUnitAndTimeUnit |
| RWStepBasic_RWSiUnitAndVolumeUnit | Read & Write Module for SiUnitAndVolumeUnit |
| RWStepBasic_RWSolidAngleMeasureWithUnit | Read & Write Module for SolidAngleMeasureWithUnit |
| RWStepBasic_RWSolidAngleUnit | Read & Write Module for SolidAngleUnit |
| RWStepBasic_RWThermodynamicTemperatureUnit | Read & Write tool for ThermodynamicTemperatureUnit |
| RWStepBasic_RWUncertaintyMeasureWithUnit | Read & Write Module for UncertaintyMeasureWithUnit |
| RWStepBasic_RWVersionedActionRequest | Read & Write tool for VersionedActionRequest |
| RWStepBasic_RWWeekOfYearAndDayDate | Read & Write Module for WeekOfYearAndDayDate |
| RWStepDimTol_RWAngularityTolerance | Read & Write tool for AngularityTolerance |
| RWStepDimTol_RWCircularRunoutTolerance | Read & Write tool for CircularRunoutTolerance |
| RWStepDimTol_RWCoaxialityTolerance | Read & Write tool for CoaxialityTolerance |
| RWStepDimTol_RWCommonDatum | Read & Write tool for CommonDatum |
| RWStepDimTol_RWConcentricityTolerance | Read & Write tool for ConcentricityTolerance |
| RWStepDimTol_RWCylindricityTolerance | Read & Write tool for CylindricityTolerance |
| RWStepDimTol_RWDatum | Read & Write tool for Datum |
| RWStepDimTol_RWDatumFeature | Read & Write tool for DatumFeature |
| RWStepDimTol_RWDatumReference | Read & Write tool for DatumReference |
| RWStepDimTol_RWDatumTarget | Read & Write tool for DatumTarget |
| RWStepDimTol_RWFlatnessTolerance | Read & Write tool for FlatnessTolerance |
| RWStepDimTol_RWGeometricTolerance | Read & Write tool for GeometricTolerance |
| RWStepDimTol_RWGeometricToleranceRelationship | Read & Write tool for GeometricToleranceRelationship |
| RWStepDimTol_RWGeometricToleranceWithDatumReference | Read & Write tool for GeometricToleranceWithDatumReference |
| RWStepDimTol_RWGeoTolAndGeoTolWthDatRefAndModGeoTolAndPosTol | Read & Write Module for ReprItemAndLengthMeasureWithUni |
| RWStepDimTol_RWLineProfileTolerance | Read & Write tool for LineProfileTolerance |
| RWStepDimTol_RWModifiedGeometricTolerance | Read & Write tool for ModifiedGeometricTolerance |
| RWStepDimTol_RWParallelismTolerance | Read & Write tool for ParallelismTolerance |
| RWStepDimTol_RWPerpendicularityTolerance | Read & Write tool for PerpendicularityTolerance |
| RWStepDimTol_RWPlacedDatumTargetFeature | Read & Write tool for PlacedDatumTargetFeature |
| RWStepDimTol_RWPositionTolerance | Read & Write tool for PositionTolerance |
| RWStepDimTol_RWRoundnessTolerance | Read & Write tool for RoundnessTolerance |
| RWStepDimTol_RWStraightnessTolerance | Read & Write tool for StraightnessTolerance |
| RWStepDimTol_RWSurfaceProfileTolerance | Read & Write tool for SurfaceProfileTolerance |
| RWStepDimTol_RWSymmetryTolerance | Read & Write tool for SymmetryTolerance |
| RWStepDimTol_RWTotalRunoutTolerance | Read & Write tool for TotalRunoutTolerance |
| RWStepElement_RWAnalysisItemWithinRepresentation | Read & Write tool for AnalysisItemWithinRepresentation |
| RWStepElement_RWCurve3dElementDescriptor | Read & Write tool for Curve3dElementDescriptor |
| RWStepElement_RWCurveElementEndReleasePacket | Read & Write tool for CurveElementEndReleasePacket |
| RWStepElement_RWCurveElementSectionDefinition | Read & Write tool for CurveElementSectionDefinition |
| RWStepElement_RWCurveElementSectionDerivedDefinitions | Read & Write tool for CurveElementSectionDerivedDefinitions |
| RWStepElement_RWElementDescriptor | Read & Write tool for ElementDescriptor |
| RWStepElement_RWElementMaterial | Read & Write tool for ElementMaterial |
| RWStepElement_RWSurface3dElementDescriptor | Read & Write tool for Surface3dElementDescriptor |
| RWStepElement_RWSurfaceElementProperty | Read & Write tool for SurfaceElementProperty |
| RWStepElement_RWSurfaceSection | Read & Write tool for SurfaceSection |
| RWStepElement_RWSurfaceSectionField | Read & Write tool for SurfaceSectionField |
| RWStepElement_RWSurfaceSectionFieldConstant | Read & Write tool for SurfaceSectionFieldConstant |
| RWStepElement_RWSurfaceSectionFieldVarying | Read & Write tool for SurfaceSectionFieldVarying |
| RWStepElement_RWUniformSurfaceSection | Read & Write tool for UniformSurfaceSection |
| RWStepElement_RWVolume3dElementDescriptor | Read & Write tool for Volume3dElementDescriptor |
| RWStepFEA_RWAlignedCurve3dElementCoordinateSystem | Read & Write tool for AlignedCurve3dElementCoordinateSystem |
| RWStepFEA_RWAlignedSurface3dElementCoordinateSystem | Read & Write tool for AlignedSurface3dElementCoordinateSystem |
| RWStepFEA_RWArbitraryVolume3dElementCoordinateSystem | Read & Write tool for ArbitraryVolume3dElementCoordinateSystem |
| RWStepFEA_RWConstantSurface3dElementCoordinateSystem | Read & Write tool for ConstantSurface3dElementCoordinateSystem |
| RWStepFEA_RWCurve3dElementProperty | Read & Write tool for Curve3dElementProperty |
| RWStepFEA_RWCurve3dElementRepresentation | Read & Write tool for Curve3dElementRepresentation |
| RWStepFEA_RWCurveElementEndOffset | Read & Write tool for CurveElementEndOffset |
| RWStepFEA_RWCurveElementEndRelease | Read & Write tool for CurveElementEndRelease |
| RWStepFEA_RWCurveElementInterval | Read & Write tool for CurveElementInterval |
| RWStepFEA_RWCurveElementIntervalConstant | Read & Write tool for CurveElementIntervalConstant |
| RWStepFEA_RWCurveElementIntervalLinearlyVarying | Read & Write tool for CurveElementIntervalLinearlyVarying |
| RWStepFEA_RWCurveElementLocation | Read & Write tool for CurveElementLocation |
| RWStepFEA_RWDummyNode | Read & Write tool for DummyNode |
| RWStepFEA_RWElementGeometricRelationship | Read & Write tool for ElementGeometricRelationship |
| RWStepFEA_RWElementGroup | Read & Write tool for ElementGroup |
| RWStepFEA_RWElementRepresentation | Read & Write tool for ElementRepresentation |
| RWStepFEA_RWFeaAreaDensity | Read & Write tool for FeaAreaDensity |
| RWStepFEA_RWFeaAxis2Placement3d | Read & Write tool for FeaAxis2Placement3d |
| RWStepFEA_RWFeaCurveSectionGeometricRelationship | Read & Write tool for FeaCurveSectionGeometricRelationship |
| RWStepFEA_RWFeaGroup | Read & Write tool for FeaGroup |
| RWStepFEA_RWFeaLinearElasticity | Read & Write tool for FeaLinearElasticity |
| RWStepFEA_RWFeaMassDensity | Read & Write tool for FeaMassDensity |
| RWStepFEA_RWFeaMaterialPropertyRepresentation | Read & Write tool for FeaMaterialPropertyRepresentation |
| RWStepFEA_RWFeaMaterialPropertyRepresentationItem | Read & Write tool for FeaMaterialPropertyRepresentationItem |
| RWStepFEA_RWFeaModel | Read & Write tool for FeaModel |
| RWStepFEA_RWFeaModel3d | Read & Write tool for FeaModel3d |
| RWStepFEA_RWFeaModelDefinition | Read & Write tool for FeaModelDefinition |
| RWStepFEA_RWFeaMoistureAbsorption | Read & Write tool for FeaMoistureAbsorption |
| RWStepFEA_RWFeaParametricPoint | Read & Write tool for FeaParametricPoint |
| RWStepFEA_RWFeaRepresentationItem | Read & Write tool for FeaRepresentationItem |
| RWStepFEA_RWFeaSecantCoefficientOfLinearThermalExpansion | Read & Write tool for FeaSecantCoefficientOfLinearThermalExpansion |
| RWStepFEA_RWFeaShellBendingStiffness | Read & Write tool for FeaShellBendingStiffness |
| RWStepFEA_RWFeaShellMembraneBendingCouplingStiffness | Read & Write tool for FeaShellMembraneBendingCouplingStiffness |
| RWStepFEA_RWFeaShellMembraneStiffness | Read & Write tool for FeaShellMembraneStiffness |
| RWStepFEA_RWFeaShellShearStiffness | Read & Write tool for FeaShellShearStiffness |
| RWStepFEA_RWFeaSurfaceSectionGeometricRelationship | Read & Write tool for FeaSurfaceSectionGeometricRelationship |
| RWStepFEA_RWFeaTangentialCoefficientOfLinearThermalExpansion | Read & Write tool for FeaTangentialCoefficientOfLinearThermalExpansion |
| RWStepFEA_RWFreedomAndCoefficient | Read & Write tool for FreedomAndCoefficient |
| RWStepFEA_RWFreedomsList | Read & Write tool for FreedomsList |
| RWStepFEA_RWGeometricNode | Read & Write tool for GeometricNode |
| RWStepFEA_RWNode | Read & Write tool for Node |
| RWStepFEA_RWNodeDefinition | Read & Write tool for NodeDefinition |
| RWStepFEA_RWNodeGroup | Read & Write tool for NodeGroup |
| RWStepFEA_RWNodeRepresentation | Read & Write tool for NodeRepresentation |
| RWStepFEA_RWNodeSet | Read & Write tool for NodeSet |
| RWStepFEA_RWNodeWithSolutionCoordinateSystem | Read & Write tool for NodeWithSolutionCoordinateSystem |
| RWStepFEA_RWNodeWithVector | Read & Write tool for NodeWithVector |
| RWStepFEA_RWParametricCurve3dElementCoordinateDirection | Read & Write tool for ParametricCurve3dElementCoordinateDirection |
| RWStepFEA_RWParametricCurve3dElementCoordinateSystem | Read & Write tool for ParametricCurve3dElementCoordinateSystem |
| RWStepFEA_RWParametricSurface3dElementCoordinateSystem | Read & Write tool for ParametricSurface3dElementCoordinateSystem |
| RWStepFEA_RWSurface3dElementRepresentation | Read & Write tool for Surface3dElementRepresentation |
| RWStepFEA_RWVolume3dElementRepresentation | Read & Write tool for Volume3dElementRepresentation |
| RWStepGeom_RWAxis1Placement | Read & Write Module for Axis1Placement |
| RWStepGeom_RWAxis2Placement2d | Read & Write Module for Axis2Placement2d |
| RWStepGeom_RWAxis2Placement3d | Read & Write Module for Axis2Placement3d |
| RWStepGeom_RWBezierCurve | Read & Write Module for BezierCurve |
| RWStepGeom_RWBezierCurveAndRationalBSplineCurve | Read & Write Module for BezierCurveAndRationalBSplineCurve |
| RWStepGeom_RWBezierSurface | Read & Write Module for BezierSurface |
| RWStepGeom_RWBezierSurfaceAndRationalBSplineSurface | Read & Write Module for BezierSurfaceAndRationalBSplineSurface |
| RWStepGeom_RWBoundaryCurve | Read & Write Module for BoundaryCurve |
| RWStepGeom_RWBoundedCurve | Read & Write Module for BoundedCurve |
| RWStepGeom_RWBoundedSurface | Read & Write Module for BoundedSurface |
| RWStepGeom_RWBSplineCurve | Read & Write Module for BSplineCurve |
| RWStepGeom_RWBSplineCurveWithKnots | Read & Write Module for BSplineCurveWithKnots Check added by CKY , 7-OCT-1996 |
| RWStepGeom_RWBSplineCurveWithKnotsAndRationalBSplineCurve | Read & Write Module for BSplineCurveWithKnotsAndRationalBSplineCurve Check added by CKY , 7-OCT-1996 |
| RWStepGeom_RWBSplineSurface | Read & Write Module for BSplineSurface |
| RWStepGeom_RWBSplineSurfaceWithKnots | Read & Write Module for BSplineSurfaceWithKnots Check added by CKY , 7-OCT-1996 |
| RWStepGeom_RWBSplineSurfaceWithKnotsAndRationalBSplineSurface | Read & Write Module for BSplineSurfaceWithKnotsAndRationalBSplineSurface Check added by CKY , 7-OCT-1996 |
| RWStepGeom_RWCartesianPoint | Read & Write Module for CartesianPoint |
| RWStepGeom_RWCartesianTransformationOperator | Read & Write Module for CartesianTransformationOperator |
| RWStepGeom_RWCartesianTransformationOperator3d | Read & Write Module for CartesianTransformationOperator3d |
| RWStepGeom_RWCircle | Read & Write Module for Circle |
| RWStepGeom_RWCompositeCurve | Read & Write Module for CompositeCurve |
| RWStepGeom_RWCompositeCurveOnSurface | Read & Write Module for CompositeCurveOnSurface |
| RWStepGeom_RWCompositeCurveSegment | Read & Write Module for CompositeCurveSegment |
| RWStepGeom_RWConic | Read & Write Module for Conic |
| RWStepGeom_RWConicalSurface | Read & Write Module for ConicalSurface |
| RWStepGeom_RWCurve | Read & Write Module for Curve |
| RWStepGeom_RWCurveBoundedSurface | Read & Write tool for CurveBoundedSurface |
| RWStepGeom_RWCurveReplica | Read & Write Module for CurveReplica |
| RWStepGeom_RWCylindricalSurface | Read & Write Module for CylindricalSurface |
| RWStepGeom_RWDegeneratePcurve | Read & Write Module for DegeneratePcurve |
| RWStepGeom_RWDegenerateToroidalSurface | Read & Write Module for DegenerateToroidalSurface |
| RWStepGeom_RWDirection | Read & Write Module for Direction Check added by CKY , 7-OCT-1996 |
| RWStepGeom_RWElementarySurface | Read & Write Module for ElementarySurface |
| RWStepGeom_RWEllipse | Read & Write Module for Ellipse Check added by CKY , 7-OCT-1996 |
| RWStepGeom_RWEvaluatedDegeneratePcurve | Read & Write Module for EvaluatedDegeneratePcurve |
| RWStepGeom_RWGeometricRepresentationContext | Read & Write Module for GeometricRepresentationContext |
| RWStepGeom_RWGeometricRepresentationContextAndGlobalUnitAssignedContext | Read & Write Module for GeometricRepresentationContextAndGlobalUnitAssignedContext |
| RWStepGeom_RWGeometricRepresentationContextAndParametricRepresentationContext | Read & Write Module for GeometricRepresentationContextAndParametricRepresentationContext |
| RWStepGeom_RWGeometricRepresentationItem | Read & Write Module for GeometricRepresentationItem |
| RWStepGeom_RWGeomRepContextAndGlobUnitAssCtxAndGlobUncertaintyAssCtx | Read & Write Module for GeomRepContextAndGlobUnitAssCtxAndGlobUncertaintyAssCtx |
| RWStepGeom_RWHyperbola | Read & Write Module for Hyperbola |
| RWStepGeom_RWIntersectionCurve | Read & Write Module for IntersectionCurve |
| RWStepGeom_RWLine | Read & Write Module for Line |
| RWStepGeom_RWOffsetCurve3d | Read & Write Module for OffsetCurve3d |
| RWStepGeom_RWOffsetSurface | Read & Write Module for OffsetSurface |
| RWStepGeom_RWOrientedSurface | Read & Write tool for OrientedSurface |
| RWStepGeom_RWOuterBoundaryCurve | Read & Write Module for OuterBoundaryCurve |
| RWStepGeom_RWParabola | Read & Write Module for Parabola |
| RWStepGeom_RWPcurve | Read & Write Module for Pcurve |
| RWStepGeom_RWPlacement | Read & Write Module for Placement |
| RWStepGeom_RWPlane | Read & Write Module for Plane |
| RWStepGeom_RWPoint | Read & Write Module for Point |
| RWStepGeom_RWPointOnCurve | Read & Write Module for PointOnCurve |
| RWStepGeom_RWPointOnSurface | Read & Write Module for PointOnSurface |
| RWStepGeom_RWPointReplica | Read & Write Module for PointReplica |
| RWStepGeom_RWPolyline | Read & Write Module for Polyline |
| RWStepGeom_RWQuasiUniformCurve | Read & Write Module for QuasiUniformCurve |
| RWStepGeom_RWQuasiUniformCurveAndRationalBSplineCurve | Read & Write Module for QuasiUniformCurveAndRationalBSplineCurve |
| RWStepGeom_RWQuasiUniformSurface | Read & Write Module for QuasiUniformSurface |
| RWStepGeom_RWQuasiUniformSurfaceAndRationalBSplineSurface | Read & Write Module for QuasiUniformSurfaceAndRationalBSplineSurface |
| RWStepGeom_RWRationalBSplineCurve | Read & Write Module for RationalBSplineCurve Check added by CKY , 7-OCT-1996 |
| RWStepGeom_RWRationalBSplineSurface | Read & Write Module for RationalBSplineSurface Check added by CKY , 7-OCT-1996 |
| RWStepGeom_RWRectangularCompositeSurface | Read & Write Module for RectangularCompositeSurface |
| RWStepGeom_RWRectangularTrimmedSurface | Read & Write Module for RectangularTrimmedSurface |
| RWStepGeom_RWReparametrisedCompositeCurveSegment | Read & Write Module for ReparametrisedCompositeCurveSegment |
| RWStepGeom_RWSeamCurve | Read & Write Module for SeamCurve |
| RWStepGeom_RWSphericalSurface | Read & Write Module for SphericalSurface |
| RWStepGeom_RWSurface | Read & Write Module for Surface |
| RWStepGeom_RWSurfaceCurve | Read & Write Module for SurfaceCurve |
| RWStepGeom_RWSurfaceCurveAndBoundedCurve | Read StepGeom_SurfaceCurveAndBoundedCurve |
| RWStepGeom_RWSurfaceOfLinearExtrusion | Read & Write Module for SurfaceOfLinearExtrusion |
| RWStepGeom_RWSurfaceOfRevolution | Read & Write Module for SurfaceOfRevolution |
| RWStepGeom_RWSurfacePatch | Read & Write Module for SurfacePatch |
| RWStepGeom_RWSurfaceReplica | Read & Write Module for SurfaceReplica |
| RWStepGeom_RWSweptSurface | Read & Write Module for SweptSurface |
| RWStepGeom_RWToroidalSurface | Read & Write Module for ToroidalSurface Check added by CKY , 7-OCT-1996 |
| RWStepGeom_RWTrimmedCurve | Read & Write Module for TrimmedCurve |
| RWStepGeom_RWUniformCurve | Read & Write Module for UniformCurve |
| RWStepGeom_RWUniformCurveAndRationalBSplineCurve | Read & Write Module for UniformCurveAndRationalBSplineCurve |
| RWStepGeom_RWUniformSurface | Read & Write Module for UniformSurface |
| RWStepGeom_RWUniformSurfaceAndRationalBSplineSurface | Read & Write Module for UniformSurfaceAndRationalBSplineSurface |
| RWStepGeom_RWVector | Read & Write Module for Vector Check added by CKY , 7-OCT-1996 |
| RWStepRepr_RWAssemblyComponentUsage | Read & Write tool for AssemblyComponentUsage |
| RWStepRepr_RWAssemblyComponentUsageSubstitute | Read & Write Module for AssemblyComponentUsageSubstitute |
| RWStepRepr_RWCompositeShapeAspect | Read & Write tool for CompositeShapeAspect |
| RWStepRepr_RWCompoundRepresentationItem | Read & Write Module for CompoundRepresentationItem |
| RWStepRepr_RWConfigurationDesign | Read & Write tool for ConfigurationDesign |
| RWStepRepr_RWConfigurationEffectivity | Read & Write tool for ConfigurationEffectivity |
| RWStepRepr_RWConfigurationItem | Read & Write tool for ConfigurationItem |
| RWStepRepr_RWDataEnvironment | Read & Write tool for DataEnvironment |
| RWStepRepr_RWDefinitionalRepresentation | Read & Write Module for DefinitionalRepresentation |
| RWStepRepr_RWDerivedShapeAspect | Read & Write tool for DerivedShapeAspect |
| RWStepRepr_RWDescriptiveRepresentationItem | Read & Write Module for DescriptiveRepresentationItem |
| RWStepRepr_RWExtension | Read & Write tool for Extension |
| RWStepRepr_RWFunctionallyDefinedTransformation | Read & Write Module for FunctionallyDefinedTransformation |
| RWStepRepr_RWGlobalUncertaintyAssignedContext | Read & Write Module for GlobalUncertaintyAssignedContext |
| RWStepRepr_RWGlobalUnitAssignedContext | Read & Write Module for GlobalUnitAssignedContext |
| RWStepRepr_RWItemDefinedTransformation | Read & Write Module for ItemDefinedTransformation |
| RWStepRepr_RWMakeFromUsageOption | Read & Write tool for MakeFromUsageOption |
| RWStepRepr_RWMappedItem | Read & Write Module for MappedItem |
| RWStepRepr_RWMaterialDesignation | Read & Write Module for MaterialDesignation |
| RWStepRepr_RWMaterialProperty | Read & Write tool for MaterialProperty |
| RWStepRepr_RWMaterialPropertyRepresentation | Read & Write tool for MaterialPropertyRepresentation |
| RWStepRepr_RWMeasureRepresentationItem | Read & Write Module for MeasureRepresentationItem |
| RWStepRepr_RWParametricRepresentationContext | Read & Write Module for ParametricRepresentationContext |
| RWStepRepr_RWProductConcept | Read & Write tool for ProductConcept |
| RWStepRepr_RWProductDefinitionShape | Read & Write tool for ProductDefinitionShape |
| RWStepRepr_RWPropertyDefinition | Read & Write tool for PropertyDefinition |
| RWStepRepr_RWPropertyDefinitionRelationship | Read & Write tool for PropertyDefinitionRelationship |
| RWStepRepr_RWPropertyDefinitionRepresentation | Read & Write tool for PropertyDefinitionRepresentation |
| RWStepRepr_RWQuantifiedAssemblyComponentUsage | Read & Write tool for QuantifiedAssemblyComponentUsage |
| RWStepRepr_RWRepresentation | Read & Write Module for Representation |
| RWStepRepr_RWRepresentationContext | Read & Write Module for RepresentationContext |
| RWStepRepr_RWRepresentationItem | Read & Write Module for RepresentationItem |
| RWStepRepr_RWRepresentationMap | Read & Write Module for RepresentationMap |
| RWStepRepr_RWRepresentationRelationship | Read & Write Module for RepresentationRelationship |
| RWStepRepr_RWRepresentationRelationshipWithTransformation | Read & Write Module for RepresentationRelationshipWithTransformation |
| RWStepRepr_RWReprItemAndLengthMeasureWithUnit | Read & Write Module for ReprItemAndLengthMeasureWithUni |
| RWStepRepr_RWShapeAspect | Read & Write Module for ShapeAspect |
| RWStepRepr_RWShapeAspectDerivingRelationship | Read & Write tool for ShapeAspectDerivingRelationship |
| RWStepRepr_RWShapeAspectRelationship | Read & Write tool for ShapeAspectRelationship |
| RWStepRepr_RWShapeAspectTransition | Read & Write tool for ShapeAspectTransition |
| RWStepRepr_RWShapeRepresentationRelationshipWithTransformation | Read & Write Module for ShapeRepresentationRelationshipWithTransformation |
| RWStepRepr_RWSpecifiedHigherUsageOccurrence | Read & Write tool for SpecifiedHigherUsageOccurrence |
| RWStepRepr_RWStructuralResponseProperty | Read & Write tool for StructuralResponseProperty |
| RWStepRepr_RWStructuralResponsePropertyDefinitionRepresentation | Read & Write tool for StructuralResponsePropertyDefinitionRepresentation |
| RWStepShape_RWAdvancedBrepShapeRepresentation | Read & Write Module for AdvancedBrepShapeRepresentation |
| RWStepShape_RWAdvancedFace | Read & Write Module for AdvancedFace |
| RWStepShape_RWAngularLocation | Read & Write tool for AngularLocation |
| RWStepShape_RWAngularSize | Read & Write tool for AngularSize |
| RWStepShape_RWBlock | Read & Write Module for Block |
| RWStepShape_RWBooleanResult | Read & Write Module for BooleanResult |
| RWStepShape_RWBoxDomain | Read & Write Module for BoxDomain |
| RWStepShape_RWBoxedHalfSpace | Read & Write Module for BoxedHalfSpace |
| RWStepShape_RWBrepWithVoids | Read & Write Module for BrepWithVoids |
| RWStepShape_RWClosedShell | Read & Write Module for ClosedShell |
| RWStepShape_RWCompoundShapeRepresentation | Read & Write tool for CompoundShapeRepresentation |
| RWStepShape_RWConnectedEdgeSet | Read & Write tool for ConnectedEdgeSet |
| RWStepShape_RWConnectedFaceSet | Read & Write Module for ConnectedFaceSet |
| RWStepShape_RWConnectedFaceShapeRepresentation | Read & Write tool for ConnectedFaceShapeRepresentation |
| RWStepShape_RWConnectedFaceSubSet | Read & Write tool for ConnectedFaceSubSet |
| RWStepShape_RWContextDependentShapeRepresentation | Read & Write Module for ContextDependentShapeRepresentation |
| RWStepShape_RWCsgShapeRepresentation | Read & Write Module for CsgShapeRepresentation |
| RWStepShape_RWCsgSolid | Read & Write Module for CsgSolid |
| RWStepShape_RWDefinitionalRepresentationAndShapeRepresentation | Read & Write Module for ConversionBasedUnitAndLengthUnit |
| RWStepShape_RWDimensionalCharacteristicRepresentation | Read & Write tool for DimensionalCharacteristicRepresentation |
| RWStepShape_RWDimensionalLocation | Read & Write tool for DimensionalLocation |
| RWStepShape_RWDimensionalLocationWithPath | Read & Write tool for DimensionalLocationWithPath |
| RWStepShape_RWDimensionalSize | Read & Write tool for DimensionalSize |
| RWStepShape_RWDimensionalSizeWithPath | Read & Write tool for DimensionalSizeWithPath |
| RWStepShape_RWEdge | Read & Write Module for Edge |
| RWStepShape_RWEdgeBasedWireframeModel | Read & Write tool for EdgeBasedWireframeModel |
| RWStepShape_RWEdgeBasedWireframeShapeRepresentation | Read & Write tool for EdgeBasedWireframeShapeRepresentation |
| RWStepShape_RWEdgeCurve | Read & Write Module for EdgeCurve Check added by CKY , 7-OCT-1996 |
| RWStepShape_RWEdgeLoop | Read & Write Module for EdgeLoop Check added by CKY , 7-OCT-1996 |
| RWStepShape_RWExtrudedAreaSolid | Read & Write Module for ExtrudedAreaSolid |
| RWStepShape_RWExtrudedFaceSolid | Read & Write Module for ExtrudedFaceSolid |
| RWStepShape_RWFace | Read & Write Module for Face |
| RWStepShape_RWFaceBasedSurfaceModel | Read & Write tool for FaceBasedSurfaceModel |
| RWStepShape_RWFaceBound | Read & Write Module for FaceBound Check added by CKY , 7-OCT-1996 |
| RWStepShape_RWFaceOuterBound | Read & Write Module for FaceOuterBound |
| RWStepShape_RWFaceSurface | Read & Write Module for FaceSurface |
| RWStepShape_RWFacetedBrep | Read & Write Module for FacetedBrep |
| RWStepShape_RWFacetedBrepAndBrepWithVoids | Read & Write Module for FacetedBrepAndBrepWithVoids |
| RWStepShape_RWFacetedBrepShapeRepresentation | Read & Write Module for FacetedBrepShapeRepresentation |
| RWStepShape_RWGeometricallyBoundedSurfaceShapeRepresentation | Read & Write Module for GeometricallyBoundedSurfaceShapeRepresentation |
| RWStepShape_RWGeometricallyBoundedWireframeShapeRepresentation | Read & Write Module for GeometricallyBoundedWireframeShapeRepresentation |
| RWStepShape_RWGeometricCurveSet | Read & Write Module for GeometricCurveSet |
| RWStepShape_RWGeometricSet | Read & Write Module for GeometricSet |
| RWStepShape_RWHalfSpaceSolid | Read & Write Module for HalfSpaceSolid |
| RWStepShape_RWLimitsAndFits | Read & Write Module for LimitsAndFits |
| RWStepShape_RWLoop | Read & Write Module for Loop |
| RWStepShape_RWLoopAndPath | Read & Write Module for LoopAndPath |
| RWStepShape_RWManifoldSolidBrep | Read & Write Module for ManifoldSolidBrep |
| RWStepShape_RWManifoldSurfaceShapeRepresentation | Read & Write Module for ManifoldSurfaceShapeRepresentation |
| RWStepShape_RWMeasureQualification | Read & Write Module for MeasureQualification |
| RWStepShape_RWMeasureRepresentationItemAndQualifiedRepresentationItem | Read & Write Module for MeasureRepresentationItemAndQualifiedRepresentationItem |
| RWStepShape_RWNonManifoldSurfaceShapeRepresentation | Read & Write tool for NonManifoldSurfaceShapeRepresentation |
| RWStepShape_RWOpenShell | Read & Write Module for OpenShell |
| RWStepShape_RWOrientedClosedShell | Read & Write Module for OrientedClosedShell |
| RWStepShape_RWOrientedEdge | Read & Write Module for OrientedEdge |
| RWStepShape_RWOrientedFace | Read & Write Module for OrientedFace |
| RWStepShape_RWOrientedOpenShell | Read & Write Module for OrientedOpenShell |
| RWStepShape_RWOrientedPath | Read & Write Module for OrientedPath |
| RWStepShape_RWPath | Read & Write Module for Path |
| RWStepShape_RWPlusMinusTolerance | Read & Write Module for PlusMinusTolerance |
| RWStepShape_RWPointRepresentation | Read & Write tool for PointRepresentation |
| RWStepShape_RWPolyLoop | Read & Write Module for PolyLoop |
| RWStepShape_RWPrecisionQualifier | Read & Write Module for PrecisionQualifier |
| RWStepShape_RWQualifiedRepresentationItem | Read & Write Module for QualifiedRepresentationItem |
| RWStepShape_RWRevolvedAreaSolid | Read & Write Module for RevolvedAreaSolid |
| RWStepShape_RWRevolvedFaceSolid | |
| RWStepShape_RWRightAngularWedge | Read & Write Module for RightAngularWedge |
| RWStepShape_RWRightCircularCone | Read & Write Module for RightCircularCone |
| RWStepShape_RWRightCircularCylinder | Read & Write Module for RightCircularCylinder |
| RWStepShape_RWSeamEdge | Read & Write tool for SeamEdge |
| RWStepShape_RWShapeDefinitionRepresentation | Read & Write tool for ShapeDefinitionRepresentation |
| RWStepShape_RWShapeDimensionRepresentation | Read & Write tool for ShapeDimensionRepresentation |
| RWStepShape_RWShapeRepresentation | Read & Write Module for ShapeRepresentation |
| RWStepShape_RWShapeRepresentationWithParameters | Read & Write tool for ShapeRepresentationWithParameters |
| RWStepShape_RWShellBasedSurfaceModel | Read & Write Module for ShellBasedSurfaceModel |
| RWStepShape_RWSolidModel | Read & Write Module for SolidModel |
| RWStepShape_RWSolidReplica | Read & Write Module for SolidReplica |
| RWStepShape_RWSphere | Read & Write Module for Sphere |
| RWStepShape_RWSubedge | Read & Write tool for Subedge |
| RWStepShape_RWSubface | Read & Write tool for Subface |
| RWStepShape_RWSweptAreaSolid | Read & Write Module for SweptAreaSolid |
| RWStepShape_RWSweptFaceSolid | Read & Write Module for SweptFaceSolid |
| RWStepShape_RWToleranceValue | Read & Write Module for ToleranceValue |
| RWStepShape_RWTopologicalRepresentationItem | Read & Write Module for TopologicalRepresentationItem |
| RWStepShape_RWTorus | Read & Write Module for Torus |
| RWStepShape_RWTransitionalShapeRepresentation | Read & Write Module for TransitionalShapeRepresentation |
| RWStepShape_RWTypeQualifier | Read & Write Module for TypeQualifier |
| RWStepShape_RWVertex | Read & Write Module for Vertex |
| RWStepShape_RWVertexLoop | Read & Write Module for VertexLoop |
| RWStepShape_RWVertexPoint | Read & Write Module for VertexPoint |
| RWStepVisual_RWAreaInSet | Read & Write Module for AreaInSet |
| RWStepVisual_RWBackgroundColour | Read & Write Module for BackgroundColour |
| RWStepVisual_RWCameraImage | Read & Write Module for CameraImage |
| RWStepVisual_RWCameraModel | Read & Write Module for CameraModel |
| RWStepVisual_RWCameraModelD2 | Read & Write Module for CameraModelD2 |
| RWStepVisual_RWCameraModelD3 | Read & Write Module for CameraModelD3 |
| RWStepVisual_RWCameraUsage | Read & Write Module for CameraUsage |
| RWStepVisual_RWColour | Read & Write Module for Colour |
| RWStepVisual_RWColourRgb | Read & Write Module for ColourRgb |
| RWStepVisual_RWColourSpecification | Read & Write Module for ColourSpecification |
| RWStepVisual_RWCompositeText | Read & Write Module for CompositeText |
| RWStepVisual_RWCompositeTextWithExtent | Read & Write Module for CompositeTextWithExtent |
| RWStepVisual_RWContextDependentInvisibility | Read & Write Module for ContextDependentInvisibility |
| RWStepVisual_RWContextDependentOverRidingStyledItem | Read & Write Module for ContextDependentOverRidingStyledItem |
| RWStepVisual_RWCurveStyle | Read & Write Module for CurveStyle |
| RWStepVisual_RWCurveStyleFont | Read & Write Module for CurveStyleFont |
| RWStepVisual_RWCurveStyleFontPattern | Read & Write Module for CurveStyleFontPattern |
| RWStepVisual_RWDraughtingModel | Read & Write tool for DraughtingModel |
| RWStepVisual_RWDraughtingPreDefinedColour | Read & Write Module for DraughtingPreDefinedColour |
| RWStepVisual_RWDraughtingPreDefinedCurveFont | Read & Write Module for DraughtingPreDefinedCurveFont |
| RWStepVisual_RWExternallyDefinedCurveFont | Read & Write tool for ExternallyDefinedCurveFont |
| RWStepVisual_RWFillAreaStyle | Read & Write Module for FillAreaStyle |
| RWStepVisual_RWFillAreaStyleColour | Read & Write Module for FillAreaStyleColour |
| RWStepVisual_RWInvisibility | Read & Write Module for Invisibility |
| RWStepVisual_RWMechanicalDesignGeometricPresentationArea | Read & Write Module for MechanicalDesignGeometricPresentationArea |
| RWStepVisual_RWMechanicalDesignGeometricPresentationRepresentation | Read & Write Module for MechanicalDesignGeometricPresentationRepresentation |
| RWStepVisual_RWOverRidingStyledItem | Read & Write Module for OverRidingStyledItem |
| RWStepVisual_RWPlanarBox | Read & Write Module for PlanarBox |
| RWStepVisual_RWPlanarExtent | Read & Write Module for PlanarExtent |
| RWStepVisual_RWPointStyle | Read & Write Module for PointStyle |
| RWStepVisual_RWPreDefinedColour | Read & Write Module for PreDefinedColour |
| RWStepVisual_RWPreDefinedCurveFont | Read & Write Module for PreDefinedCurveFont |
| RWStepVisual_RWPreDefinedItem | Read & Write Module for PreDefinedItem |
| RWStepVisual_RWPresentationArea | Read & Write Module for PresentationArea |
| RWStepVisual_RWPresentationLayerAssignment | Read & Write Module for PresentationLayerAssignment |
| RWStepVisual_RWPresentationLayerUsage | Read & Write Module for PresentationLayerUsage |
| RWStepVisual_RWPresentationRepresentation | Read & Write Module for PresentationRepresentation |
| RWStepVisual_RWPresentationSet | Read & Write Module for PresentationSet |
| RWStepVisual_RWPresentationSize | Read & Write Module for PresentationSize |
| RWStepVisual_RWPresentationStyleAssignment | Read & Write Module for PresentationStyleAssignment |
| RWStepVisual_RWPresentationStyleByContext | Read & Write Module for PresentationStyleByContext |
| RWStepVisual_RWPresentationView | Read & Write Module for PresentationView |
| RWStepVisual_RWPresentedItemRepresentation | Read & Write Module for PresentedItemRepresentation |
| RWStepVisual_RWStyledItem | Read & Write Module for StyledItem |
| RWStepVisual_RWSurfaceSideStyle | Read & Write Module for SurfaceSideStyle |
| RWStepVisual_RWSurfaceStyleBoundary | Read & Write Module for SurfaceStyleBoundary |
| RWStepVisual_RWSurfaceStyleControlGrid | Read & Write Module for SurfaceStyleControlGrid |
| RWStepVisual_RWSurfaceStyleFillArea | Read & Write Module for SurfaceStyleFillArea |
| RWStepVisual_RWSurfaceStyleParameterLine | Read & Write Module for SurfaceStyleParameterLine |
| RWStepVisual_RWSurfaceStyleSegmentationCurve | Read & Write Module for SurfaceStyleSegmentationCurve |
| RWStepVisual_RWSurfaceStyleSilhouette | Read & Write Module for SurfaceStyleSilhouette |
| RWStepVisual_RWSurfaceStyleUsage | Read & Write Module for SurfaceStyleUsage |
| RWStepVisual_RWTemplate | Read & Write Module for Template |
| RWStepVisual_RWTemplateInstance | Read & Write Module for TemplateInstance |
| RWStepVisual_RWTextLiteral | Read & Write Module for TextLiteral |
| RWStepVisual_RWTextStyle | Read & Write Module for TextStyle |
| RWStepVisual_RWTextStyleForDefinedFont | Read & Write Module for TextStyleForDefinedFont |
| RWStepVisual_RWTextStyleWithBoxCharacteristics | Read & Write Module for TextStyleWithBoxCharacteristics |
| RWStepVisual_RWViewVolume | Read & Write Module for ViewVolume |
| RWStl | This package contains the methods to be used in the Stereo Lithograpy Application. The main features of this application are ,starting from a Shape : |
| Segment | |
| Select3D_BVHPrimitiveContent | The purpose of this class is to provide a link between BVH_PrimitiveSet and Select3D_SensitiveSet instance to build BVH tree for set of sensitives |
| Select3D_InteriorSensitivePointSet | This class handles the selection of arbitrary point set with internal type of sensitivity. The main principle is to split the point set given onto planar convex polygons and search for the overlap with one or more of them through traverse of BVH tree |
| Select3D_Pnt | |
| Select3D_PointData | |
| Select3D_SensitiveBox | A framework to define selection by a sensitive box |
| Select3D_SensitiveCircle | A framework to define sensitive 3D arcs and circles. In some cases this class can raise Standard_ConstructionError and Standard_OutOfRange exceptions. For more details see Select3D_SensitivePoly |
| Select3D_SensitiveCurve | A framework to define a sensitive 3D curve. In some cases this class can raise Standard_ConstructionError and Standard_OutOfRange exceptions. For more details see Select3D_SensitivePoly |
| Select3D_SensitiveEntity | Abstract framework to define 3D sensitive entities. As the selection process uses the principle of a projection of 3D shapes onto a 2D view where nearness to a rectangle determines whether a shape is picked or not, all 3D shapes need to be converted into 2D ones in order to be selected |
| Select3D_SensitiveFace | Sensitive Entity to make a face selectable. In some cases this class can raise Standard_ConstructionError and Standard_OutOfRange exceptions. For more details see Select3D_SensitivePoly |
| Select3D_SensitiveGroup | A framework to define selection of a sensitive group by a sensitive entity which is a set of 3D sensitive entities. Remark: 2 modes are possible for rectangle selection the group is considered selected 1) when all the entities inside are selected in the rectangle 2) only one entity inside is selected by the rectangle By default the "Match All entities" mode is set |
| Select3D_SensitivePoint | A framework to define sensitive 3D points |
| Select3D_SensitivePoly | Sensitive Entity to make a face selectable. In some cases this class can raise Standard_ConstructionError and Standard_OutOfRange exceptions from its member Select3D_PointData myPolyg |
| Select3D_SensitiveSegment | A framework to define sensitive zones along a segment One gives the 3D start and end point |
| Select3D_SensitiveSet | This class is base class for handling overlap detection of complex sensitive entities. It provides an interface for building BVH tree for some set of entities. Thereby, each iteration of overlap detection is a traverse of BVH tree in fact. To use speed-up hierarchical structure in a custom complex sensitive entity, it is necessary to make that custom entity a descendant of this class and organize sub-entities in some container which allows referencing to elements by index. Note that methods taking index as a parameter are used for BVH build and the range of given index is [0; Size() - 1]. For example of usage see Select3D_SensitiveTriangulation |
| Select3D_SensitiveTriangle | A framework to define selection of triangles in a view. This comes into play in the detection of meshing and triangulation in surfaces. In some cases this class can raise Standard_ConstructionError and Standard_OutOfRange exceptions. For more details see Select3D_SensitivePoly |
| Select3D_SensitiveTriangulation | A framework to define selection of a sensitive entity made of a set of triangles |
| Select3D_SensitiveWire | A framework to define selection of a wire owner by an elastic wire band |
| SelectBasics | Interface class for dynamic selection |
| SelectBasics_EntityOwner | Defines an abstract owner of sensitive primitives. Owners are typically used to establish a connection between sensitive entities and high-level objects (e.g. presentations) |
| SelectBasics_PickResult | This structure provides unified access to the results of Matches() method in all sensitive entities |
| SelectBasics_SelectingVolumeManager | This class provides an interface for selecting volume manager, which is responsible for all overlap detection methods and calculation of minimum depth, distance to center of geometry and detected closest point on entity |
| SelectBasics_SensitiveEntity | Root class; the inheriting classes will be able to give sensitive Areas for the dynamic selection algorithms |
| SelectMgr_AndFilter | A framework to define a selection filter for two or more types of entity |
| SelectMgr_BaseFrustum | This class is an interface for different types of selecting frustums, defining different selection types, like point, box or polyline selection. It contains signatures of functions for detection of overlap by sensitive entity and initializes some data for building the selecting frustum |
| SelectMgr_CompareResults | |
| SelectMgr_CompositionFilter | A framework to define a compound filter composed of two or more simple filters |
| SelectMgr_DataMapIteratorOfDataMapOfObjectSelectors | |
| SelectMgr_DataMapNodeOfDataMapOfObjectSelectors | |
| SelectMgr_DataMapOfObjectSelectors | |
| SelectMgr_EntityOwner | A framework to define classes of owners of sensitive primitives. The owner is the link between application and selection data structures. For the application to make its own objects selectable, it must define owner classes inheriting this framework |
| SelectMgr_Filter | The root class to define filter objects for selection. Advance handling of objects requires the services of filters. These only allow dynamic detection and selection of objects which correspond to the criteria defined in each. Eight standard filters inheriting SelectMgr_Filter are defined in Open CASCADE. You can create your own filters by defining new filter classes inheriting this framework. You use these filters by loading them into an AIS interactive context |
| SelectMgr_Frustum | This is an internal class containing representation of rectangular selecting frustum, created in case of point and box selection, and algorithms for overlap detection between selecting frustum and sensitive entities. The principle of frustum calculation: |
| SelectMgr_FrustumBuilder | The purpose of this class is to provide unified interface for building selecting frustum depending on current camera projection and orientation matrices, window size and viewport parameters |
| SelectMgr_IndexedDataMapNodeOfIndexedDataMapOfOwnerCriterion | |
| SelectMgr_IndexedDataMapOfOwnerCriterion | |
| SelectMgr_IndexedMapNodeOfIndexedMapOfOwner | |
| SelectMgr_IndexedMapOfOwner | |
| SelectMgr_ListIteratorOfListOfFilter | |
| SelectMgr_ListNodeOfListOfFilter | |
| SelectMgr_ListOfFilter | |
| SelectMgr_OrFilter | A framework to define an or selection filter. This selects one or another type of sensitive entity |
| SelectMgr_RectangularFrustum | This class contains representation of rectangular selecting frustum, created in case of point and box selection, and algorithms for overlap detection between selecting frustum and sensitive entities. The principle of frustum calculation: |
| SelectMgr_SelectableObject | A framework to supply the structure of the object to be selected. At the first pick, this structure is created by calling the appropriate algorithm and retaining this framework for further picking. This abstract framework is inherited in Application Interactive Services (AIS), notably in AIS_InteractiveObject. Consequently, 3D selection should be handled by the relevant daughter classes and their member functions in AIS. This is particularly true in the creation of new interactive objects |
| SelectMgr_SelectableObjectSet | The purpose of this class is to organize all selectable objects into data structure, allowing to build BVH tree. For selectable objects binned BVH builder is used with 32 bins and 1 element per leaf |
| SelectMgr_SelectingVolumeManager | This class is used to switch between active selecting volumes depending on selection type chosen by the user |
| SelectMgr_Selection | Represents the state of a given selection mode for a Selectable Object. Contains all the sensitive entities available for this mode. An interactive object can have an indefinite number of modes of selection, each representing a "decomposition" into sensitive primitives; each primitive has an Owner (SelectMgr_EntityOwner) which allows us to identify the exact entity which has been detected. Each Selection mode is identified by an index. The set of sensitive primitives which correspond to a given mode is stocked in a SelectMgr_Selection object. By Convention, the default selection mode which allows us to grasp the Interactive object in its entirety will be mode 0. AIS_Trihedron : 4 selection modes |
| SelectMgr_SelectionManager | A framework to manage selection from the point of view of viewer selectors. These can be added and removed, and selection modes can be activated and deactivated. In addition, objects may be known to all selectors or only to some |
| SelectMgr_SensitiveEntity | The purpose of this class is to mark sensitive entities selectable or not depending on current active selection of parent object for proper BVH traverse |
| SelectMgr_SensitiveEntitySet | This class is used to store all calculated sensitive entites of one selectable object. It provides an interface for building BVH tree which is used to speed-up the performance of searching for overlap among sensitives of one selectable object |
| SelectMgr_SequenceNodeOfSequenceOfFilter | |
| SelectMgr_SequenceNodeOfSequenceOfOwner | |
| SelectMgr_SequenceNodeOfSequenceOfSelector | |
| SelectMgr_SequenceOfFilter | |
| SelectMgr_SequenceOfOwner | |
| SelectMgr_SequenceOfSelector | |
| SelectMgr_SortCriterion | This class provides data and criterion for sorting candidate entities in the process of interactive selection by mouse click |
| SelectMgr_ToleranceMap | An internal class for calculation of current largest tolerance value which will be applied for creation of selecting frustum by default. Each time the selection set is deactivated, maximum tolerance value will be recalculated. If a user enables custom precision using StdSelect_ViewerSelector3d::SetPixelTolerance, it will be applied to all sensitive entities without any checks |
| SelectMgr_TriangularFrustum | This class contains representation of triangular selecting frustum, created in case of polyline selection, and algorithms for overlap detection between selecting frustum and sensitive entities. Overlap detection tests are implemented according to the terms of separating axis theorem (SAT) |
| SelectMgr_TriangularFrustumSet | This class is used to handle polyline selection. The main principle of polyline selection algorithm is to split the polygon defined by polyline onto triangles. Than each of them is considered as a base for triangular frustum building. In other words, each triangle vertiex will be projected from 2d screen space to 3d world space onto near and far view frustum planes. Thus, the projected triangles make up the bases of selecting frustum. When the set of such frustums is created, the function determining selection iterates through triangular frustum set and searches for overlap with any frustum |
| SelectMgr_ViewerSelector | A framework to define finding, sorting the sensitive primitives in a view. Services are also provided to define the return of the owners of those primitives selected. The primitives are sorted by criteria such as priority of the primitive or its depth in the view relative to that of other primitives. Note that in 3D, the inheriting framework StdSelect_ViewerSelector3d is only to be used if you do not want to use the services provided by AIS. Two tools are available to find and select objects found at a given position in the view. If you want to select the owners of all the objects detected at point x,y,z you use the Init - More - Next - Picked loop. If, on the other hand, you want to select only one object detected at that point, you use the Init - More - OnePicked loop. In this iteration, More is used to see if an object was picked and OnePicked, to get the object closest to the pick position. Viewer selectors are driven by SelectMgr_SelectionManager, and manipulate the SelectMgr_Selection objects given to them by the selection manager |
| ShapeAlgo | |
| ShapeAlgo_AlgoContainer | |
| ShapeAlgo_ToolContainer | Returns tools used by AlgoContainer |
| ShapeAnalysis | This package is intended to analyze geometrical objects and topological shapes. Analysis domain includes both exploring geometrical and topological properties of shapes and checking their conformance to Open CASCADE requirements. The directions of analysis provided by tools of this package are: computing quantities of subshapes, computing parameters of points on curve and surface, computing surface singularities, checking edge and wire consistency, checking edges order in the wire, checking face bounds orientation, checking small faces, analyzing shape tolerances, analyzing of free bounds of the shape |
| ShapeAnalysis_BoxBndTreeSelector | |
| ShapeAnalysis_CheckSmallFace | Analysis of the face size |
| ShapeAnalysis_Curve | Analyzing tool for 2d or 3d curve. Computes parameters of projected point onto a curve |
| ShapeAnalysis_DataMapIteratorOfDataMapOfShapeListOfReal | |
| ShapeAnalysis_DataMapNodeOfDataMapOfShapeListOfReal | |
| ShapeAnalysis_DataMapOfShapeListOfReal | |
| ShapeAnalysis_Edge | Tool for analyzing the edge. Queries geometrical representations of the edge (3d curve, pcurve on the given face or surface) and topological sub-shapes (bounding vertices). Provides methods for analyzing geometry and topology consistency (3d and pcurve(s) consistency, their adjacency to the vertices) |
| ShapeAnalysis_FreeBoundData | This class is intended to represent free bound and to store its properties |
| ShapeAnalysis_FreeBounds | This class is intended to output free bounds of the shape (free bounds are the wires consisting of edges referenced by the only face). This class works on two distinct types of shapes when analyzing their free bounds: |
| ShapeAnalysis_FreeBoundsProperties | This class is intended to calculate shape free bounds properties. This class provides the following functionalities: |
| ShapeAnalysis_Geom | Analyzing tool aimed to work on primitive geometrical objects |
| ShapeAnalysis_HSequenceOfFreeBounds | |
| ShapeAnalysis_SequenceNodeOfSequenceOfFreeBounds | |
| ShapeAnalysis_SequenceOfFreeBounds | |
| ShapeAnalysis_ShapeContents | Dumps shape contents |
| ShapeAnalysis_ShapeTolerance | Tool for computing shape tolerances (minimal, maximal, average), finding shape with tolerance matching given criteria, setting or limitating tolerances |
| ShapeAnalysis_Shell | This class provides operators to analyze edges orientation in the shell |
| ShapeAnalysis_Surface | Complements standard tool Geom_Surface by providing additional functionality for detection surface singularities, checking spatial surface closure and computing projections of 3D points onto a surface |
| ShapeAnalysis_TransferParameters | This tool is used for transferring parameters from 3d curve of the edge to pcurve and vice versa |
| ShapeAnalysis_TransferParametersProj | This tool is used for transferring parameters from 3d curve of the edge to pcurve and vice versa. This tool transfers parameters with help of projection points from curve 3d on curve 2d and vice versa |
| ShapeAnalysis_Wire | This class provides analysis of a wire to be compliant to CAS.CADE requirements |
| ShapeAnalysis_WireOrder | This class is intended to control and, if possible, redefine the order of a list of edges which define a wire Edges are not given directly, but as their bounds (start,end) |
| ShapeAnalysis_WireVertex | Analyzes and records status of vertices in a Wire |
| ShapeBuild | This package provides basic building tools for other packages in ShapeHealing. These tools are rather internal for ShapeHealing |
| ShapeBuild_Edge | This class provides low-level operators for building an edge 3d curve, copying edge with replaced vertices etc |
| ShapeBuild_ReShape | Rebuilds a Shape by making pre-defined substitutions on some of its components |
| ShapeBuild_Vertex | Provides low-level functions used for constructing vertices |
| ShapeConstruct | This package provides new algorithms for constructing new geometrical objects and topological shapes. It complements and extends algorithms available in Open CASCADE topological and geometrical toolkist. The functionality provided by this package are the following: projecting curves on surface, adjusting curve to have given start and end points. P |
| ShapeConstruct_CompBezierCurves2dToBSplineCurve2d | Converts a list of connecting Bezier Curves 2d to a BSplineCurve 2d. if possible, the continuity of the BSpline will be increased to more than C0 |
| ShapeConstruct_CompBezierCurvesToBSplineCurve | Converts a list of connecting Bezier Curves to a BSplineCurve. if possible, the continuity of the BSpline will be increased to more than C0 |
| ShapeConstruct_Curve | Adjusts curve to have start and end points at the given points (currently works on lines and B-Splines only) |
| ShapeConstruct_MakeTriangulation | |
| ShapeConstruct_ProjectCurveOnSurface | This tool provides a method for computing pcurve by projecting 3d curve onto a surface. Projection is done by 23 or more points (this number is changed for B-Splines according to the following rule: the total number of the points is not less than number of spans * (degree + 1); it is increased recursively starting with 23 and is added with 22 until the condition is fulfilled). Isoparametric cases (if curve corresponds to U=const or V=const on the surface) are recognized with the given precision |
| ShapeCustom | This package is intended to convert geometrical objects and topological. The modifications of one geometrical object to another (one) geometrical object are provided. The supported modifications are the following: conversion of BSpline and Bezier surfaces to analytical form, conversion of indirect elementary surfaces (with left-handed coordinate systems) into direct ones, conversion of elementary surfaces to surfaces of revolution, conversion of surface of linear extrusion, revolution, offset surface to bspline, modification of parameterization, degree, number of segments of bspline surfaces, scale the shape |
| ShapeCustom_BSplineRestriction | This tool intended for aproximation surfaces, curves and pcurves with specified degree , max number of segments, tolerance 2d, tolerance 3d. Specified continuity can be reduced if approximation with specified continuity was not done |
| ShapeCustom_ConvertToBSpline | Implement a modification for BRepTools Modifier algortihm. Converts Surface of Linear Exctrusion, Revolution and Offset surfaces into BSpline Surface according to flags |
| ShapeCustom_ConvertToRevolution | Implements a modification for the BRepTools Modifier algortihm. Converts all elementary surfaces into surfaces of revolution |
| ShapeCustom_Curve | Converts BSpline curve to periodic |
| ShapeCustom_Curve2d | Converts curve2d to analytical form with given precision or simpify curve2d |
| ShapeCustom_DirectModification | Implements a modification for the BRepTools Modifier algortihm. Will redress indirect surfaces |
| ShapeCustom_Modification | A base class of Modification's from ShapeCustom. Implements message sending mechanism |
| ShapeCustom_RestrictionParameters | This class is axuluary tool which contains parameters for BSplineRestriction class |
| ShapeCustom_Surface | Converts a surface to the analitical form with given precision. Conversion is done only the surface is bspline of bezier and this can be approximed by some analytical surface with that precision |
| ShapeCustom_SweptToElementary | Implements a modification for the BRepTools Modifier algortihm. Converts all elementary surfaces into surfaces of revolution |
| ShapeCustom_TrsfModification | Complements BRepTools_TrsfModification to provide reversible scaling regarding tolerances. Uses actual tolerances (attached to the shapes) not ones returned by BRep_Tool::Tolerance to work with tolerances lower than Precision::Confusion |
| ShapeExtend | This package provides general tools and data structures common for other packages in SHAPEWORKS and extending CAS.CADE structures. The following items are provided by this package: |
| ShapeExtend_BasicMsgRegistrator | Abstract class that can be used for attaching messages to the objects (e.g. shapes). It is used by ShapeHealing algorithms to attach a message describing encountered case (e.g. removing small edge from a wire) |
| ShapeExtend_ComplexCurve | Defines a curve which consists of several segments. Implements basic interface to it |
| ShapeExtend_CompositeSurface | Composite surface is represented by a grid of surfaces (patches) connected geometrically. Patches may have different parametrisation ranges, but they should be parametrised in the same manner so that parameter of each patch (u,v) can be converted to global parameter on the whole surface (U,V) with help of linear transformation: |
| ShapeExtend_DataMapIteratorOfDataMapOfShapeListOfMsg | |
| ShapeExtend_DataMapIteratorOfDataMapOfTransientListOfMsg | |
| ShapeExtend_DataMapNodeOfDataMapOfShapeListOfMsg | |
| ShapeExtend_DataMapNodeOfDataMapOfTransientListOfMsg | |
| ShapeExtend_DataMapOfShapeListOfMsg | |
| ShapeExtend_DataMapOfTransientListOfMsg | |
| ShapeExtend_Explorer | This class is intended to explore shapes and convert different representations (list, sequence, compound) of complex shapes. It provides tools for: |
| ShapeExtend_MsgRegistrator | Attaches messages to the objects (generic Transient or shape). The objects of this class are transmitted to the Shape Healing algorithms so that they could collect messages occurred during processing |
| ShapeExtend_WireData | This class provides a data structure necessary for work with the wire as with ordered list of edges, what is required for many algorithms. The advantage of this class is that it allows to work with wires which are not correct. The object of the class ShapeExtend_WireData can be initialized by TopoDS_Wire, and converted back to TopoDS_Wire. An edge in the wire is defined by its rank number. Operations of accessing, adding and removing edge at the given rank number are provided. On the whole wire, operations of circular permutation and reversing (both orientations of all edges and order of edges) are provided as well. This class also provides a method to check if the edge in the wire is a seam (if the wire lies on a face). This class is handled by reference. Such an approach gives the following advantages: |
| ShapeFix | This package provides algorithms for fixing problematic (violating Open CASCADE requirements) shapes. Tools from package ShapeAnalysis are used for detecting the problems. The detecting and fixing is done taking in account various criteria implemented in BRepCheck package. Each class of package ShapeFix deals with one certain type of shapes or with some family of problems |
| ShapeFix_ComposeShell | This class is intended to create a shell from the composite surface (grid of surfaces) and set of wires. It may be either division of the supporting surface of the face, or creating a shape corresponding to face on composite surface which is missing in CAS.CADE but exists in some other systems |
| ShapeFix_DataMapIteratorOfDataMapOfShapeBox2d | |
| ShapeFix_DataMapNodeOfDataMapOfShapeBox2d | |
| ShapeFix_DataMapOfShapeBox2d | |
| ShapeFix_Edge | Fixing invalid edge. Geometrical and/or topological inconsistency: |
| ShapeFix_EdgeConnect | Rebuilds edges to connect with new vertices, was moved from ShapeBuild. Makes vertices to be shared to connect edges, updates positions and tolerances for shared vertices. Accepts edges bounded by two vertices each |
| ShapeFix_EdgeProjAux | Project 3D point (vertex) on pcurves to find Vertex Parameter on parametric representation of an edge |
| ShapeFix_Face | This operator allows to perform various fixes on face and its wires: fixes provided by ShapeFix_Wire, fixing orientation of wires, addition of natural bounds, fixing of missing seam edge, and detection and removal of null-area wires |
| ShapeFix_FaceConnect | Rebuilds connectivity between faces in shell |
| ShapeFix_FixSmallFace | Fixing face with small size |
| ShapeFix_FixSmallSolid | Fixing solids with small size |
| ShapeFix_FreeBounds | This class is intended to output free bounds of the shape (free bounds are the wires consisting of edges referenced by the only face). For building free bounds it uses ShapeAnalysis_FreeBounds class. This class complements it with the feature to reduce the number of open wires. This reduction is performed with help of connecting several adjacent open wires one to another what can lead to: |
| ShapeFix_IntersectionTool | Tool for fixing selfintersecting wire and intersecting wires |
| ShapeFix_Root | Root class for fixing operations Provides context for recording changes (optional), basic precision value and limit (minimal and maximal) values for tolerances, and message registrator |
| ShapeFix_SequenceNodeOfSequenceOfWireSegment | |
| ShapeFix_SequenceOfWireSegment | |
| ShapeFix_Shape | Fixing shape in general |
| ShapeFix_ShapeTolerance | Modifies tolerances of sub-shapes (vertices, edges, faces) |
| ShapeFix_Shell | Fixing orientation of faces in shell |
| ShapeFix_Solid | Provides method to build a solid from a shells and orients them in order to have a valid solid with finite volume |
| ShapeFix_SplitCommonVertex | Two wires have common vertex - this case is valid in BRep model and isn't valid in STEP => before writing into STEP it is necessary to split this vertex (each wire must has one vertex) |
| ShapeFix_SplitTool | Tool for splitting and cutting edges; includes methods used in OverlappingTool and IntersectionTool |
| ShapeFix_Wire | This class provides a set of tools for repairing a wire |
| ShapeFix_Wireframe | Provides methods for fixing wireframe of shape |
| ShapeFix_WireSegment | This class is auxiliary class (data storage) used in ComposeShell. It is intended for representing segment of the wire (or whole wire). The segment itself is represented by ShapeExtend_WireData. In addition, some associated data necessary for computations are stored: |
| ShapeFix_WireVertex | Fixing disconnected edges in the wire Fixes vertices in the wire on the basis of pre-analysis made by ShapeAnalysis_WireVertex (given as argument). The Wire has formerly been loaded in a ShapeExtend_WireData |
| ShapeProcess | Shape Processing module allows to define and apply general Shape Processing as a customizable sequence of Shape Healing operators. The customization is implemented via user-editable resource file which defines sequence of operators to be executed and their parameters |
| ShapeProcess_Context | Provides convenient interface to resource file Allows to load resource file and get values of attributes starting from some scope, for example if scope is defined as "ToV4" and requested parameter is "exec.op", value of "ToV4.exec.op" parameter from the resource file will be returned |
| ShapeProcess_DictionaryOfOperator | |
| ShapeProcess_IteratorOfDictionaryOfOperator | |
| ShapeProcess_Operator | Abstract Operator class providing a tool to perform an operation on Context |
| ShapeProcess_OperLibrary | Provides a set of following operators |
| ShapeProcess_ShapeContext | Extends Context to handle shapes Contains map of shape-shape, and messages attached to shapes |
| ShapeProcess_StackItemOfDictionaryOfOperator | |
| ShapeProcess_UOperator | Defines operator as container for static function OperFunc. This allows user to create new operators without creation of new classes |
| ShapeProcessAPI_ApplySequence | Applies one of the sequence read from resource file |
| ShapeSchema | |
| ShapeSchema_DBC_VArrayOfCharacter | |
| ShapeSchema_DBC_VArrayOfExtCharacter | |
| ShapeSchema_gp_Ax1 | |
| ShapeSchema_gp_Ax2 | |
| ShapeSchema_gp_Ax22d | |
| ShapeSchema_gp_Ax2d | |
| ShapeSchema_gp_Ax3 | |
| ShapeSchema_gp_Circ2d | |
| ShapeSchema_gp_Dir | |
| ShapeSchema_gp_Dir2d | |
| ShapeSchema_gp_Lin2d | |
| ShapeSchema_gp_Mat | |
| ShapeSchema_gp_Mat2d | |
| ShapeSchema_gp_Pnt | |
| ShapeSchema_gp_Pnt2d | |
| ShapeSchema_gp_Trsf | |
| ShapeSchema_gp_Trsf2d | |
| ShapeSchema_gp_Vec | |
| ShapeSchema_gp_Vec2d | |
| ShapeSchema_gp_XY | |
| ShapeSchema_gp_XYZ | |
| ShapeSchema_ObjMgt_ExternRef | |
| ShapeSchema_ObjMgt_ExternShareable | |
| ShapeSchema_ObjMgt_PSeqOfExtRef | |
| ShapeSchema_ObjMgt_SeqNodeOfPSeqOfExtRef | |
| ShapeSchema_PBRep_Curve3D | |
| ShapeSchema_PBRep_CurveOn2Surfaces | |
| ShapeSchema_PBRep_CurveOnClosedSurface | |
| ShapeSchema_PBRep_CurveOnSurface | |
| ShapeSchema_PBRep_CurveRepresentation | |
| ShapeSchema_PBRep_GCurve | |
| ShapeSchema_PBRep_PointOnCurve | |
| ShapeSchema_PBRep_PointOnCurveOnSurface | |
| ShapeSchema_PBRep_PointOnSurface | |
| ShapeSchema_PBRep_PointRepresentation | |
| ShapeSchema_PBRep_PointsOnSurface | |
| ShapeSchema_PBRep_Polygon3D | |
| ShapeSchema_PBRep_PolygonOnClosedSurface | |
| ShapeSchema_PBRep_PolygonOnClosedTriangulation | |
| ShapeSchema_PBRep_PolygonOnSurface | |
| ShapeSchema_PBRep_PolygonOnTriangulation | |
| ShapeSchema_PBRep_TEdge | |
| ShapeSchema_PBRep_TEdge1 | |
| ShapeSchema_PBRep_TFace | |
| ShapeSchema_PBRep_TFace1 | |
| ShapeSchema_PBRep_TVertex | |
| ShapeSchema_PBRep_TVertex1 | |
| ShapeSchema_PCDM_Document | |
| ShapeSchema_PCDMShape_Document | |
| ShapeSchema_PColgp_FieldOfHArray1OfCirc2d | |
| ShapeSchema_PColgp_FieldOfHArray1OfDir | |
| ShapeSchema_PColgp_FieldOfHArray1OfDir2d | |
| ShapeSchema_PColgp_FieldOfHArray1OfLin2d | |
| ShapeSchema_PColgp_FieldOfHArray1OfPnt | |
| ShapeSchema_PColgp_FieldOfHArray1OfPnt2d | |
| ShapeSchema_PColgp_FieldOfHArray1OfVec | |
| ShapeSchema_PColgp_FieldOfHArray1OfVec2d | |
| ShapeSchema_PColgp_FieldOfHArray1OfXY | |
| ShapeSchema_PColgp_FieldOfHArray1OfXYZ | |
| ShapeSchema_PColgp_FieldOfHArray2OfCirc2d | |
| ShapeSchema_PColgp_FieldOfHArray2OfDir | |
| ShapeSchema_PColgp_FieldOfHArray2OfDir2d | |
| ShapeSchema_PColgp_FieldOfHArray2OfLin2d | |
| ShapeSchema_PColgp_FieldOfHArray2OfPnt | |
| ShapeSchema_PColgp_FieldOfHArray2OfPnt2d | |
| ShapeSchema_PColgp_FieldOfHArray2OfVec | |
| ShapeSchema_PColgp_FieldOfHArray2OfVec2d | |
| ShapeSchema_PColgp_FieldOfHArray2OfXY | |
| ShapeSchema_PColgp_FieldOfHArray2OfXYZ | |
| ShapeSchema_PColgp_HArray1OfCirc2d | |
| ShapeSchema_PColgp_HArray1OfDir | |
| ShapeSchema_PColgp_HArray1OfDir2d | |
| ShapeSchema_PColgp_HArray1OfLin2d | |
| ShapeSchema_PColgp_HArray1OfPnt | |
| ShapeSchema_PColgp_HArray1OfPnt2d | |
| ShapeSchema_PColgp_HArray1OfVec | |
| ShapeSchema_PColgp_HArray1OfVec2d | |
| ShapeSchema_PColgp_HArray1OfXY | |
| ShapeSchema_PColgp_HArray1OfXYZ | |
| ShapeSchema_PColgp_HArray2OfCirc2d | |
| ShapeSchema_PColgp_HArray2OfDir | |
| ShapeSchema_PColgp_HArray2OfDir2d | |
| ShapeSchema_PColgp_HArray2OfLin2d | |
| ShapeSchema_PColgp_HArray2OfPnt | |
| ShapeSchema_PColgp_HArray2OfPnt2d | |
| ShapeSchema_PColgp_HArray2OfVec | |
| ShapeSchema_PColgp_HArray2OfVec2d | |
| ShapeSchema_PColgp_HArray2OfXY | |
| ShapeSchema_PColgp_HArray2OfXYZ | |
| ShapeSchema_PColgp_HSequenceOfDir | |
| ShapeSchema_PColgp_HSequenceOfPnt | |
| ShapeSchema_PColgp_HSequenceOfVec | |
| ShapeSchema_PColgp_HSequenceOfXYZ | |
| ShapeSchema_PColgp_SeqNodeOfHSequenceOfDir | |
| ShapeSchema_PColgp_SeqNodeOfHSequenceOfPnt | |
| ShapeSchema_PColgp_SeqNodeOfHSequenceOfVec | |
| ShapeSchema_PColgp_SeqNodeOfHSequenceOfXYZ | |
| ShapeSchema_PCollection_HAsciiString | |
| ShapeSchema_PCollection_HExtendedString | |
| ShapeSchema_PColStd_FieldOfHArray1OfInteger | |
| ShapeSchema_PColStd_FieldOfHArray1OfReal | |
| ShapeSchema_PColStd_FieldOfHArray2OfReal | |
| ShapeSchema_PColStd_HArray1OfInteger | |
| ShapeSchema_PColStd_HArray1OfReal | |
| ShapeSchema_PColStd_HArray2OfReal | |
| ShapeSchema_PGeom2d_AxisPlacement | |
| ShapeSchema_PGeom2d_BezierCurve | |
| ShapeSchema_PGeom2d_BoundedCurve | |
| ShapeSchema_PGeom2d_BSplineCurve | |
| ShapeSchema_PGeom2d_CartesianPoint | |
| ShapeSchema_PGeom2d_Circle | |
| ShapeSchema_PGeom2d_Conic | |
| ShapeSchema_PGeom2d_Curve | |
| ShapeSchema_PGeom2d_Direction | |
| ShapeSchema_PGeom2d_Ellipse | |
| ShapeSchema_PGeom2d_Geometry | |
| ShapeSchema_PGeom2d_Hyperbola | |
| ShapeSchema_PGeom2d_Line | |
| ShapeSchema_PGeom2d_OffsetCurve | |
| ShapeSchema_PGeom2d_Parabola | |
| ShapeSchema_PGeom2d_Point | |
| ShapeSchema_PGeom2d_Transformation | |
| ShapeSchema_PGeom2d_TrimmedCurve | |
| ShapeSchema_PGeom2d_Vector | |
| ShapeSchema_PGeom2d_VectorWithMagnitude | |
| ShapeSchema_PGeom_Axis1Placement | |
| ShapeSchema_PGeom_Axis2Placement | |
| ShapeSchema_PGeom_AxisPlacement | |
| ShapeSchema_PGeom_BezierCurve | |
| ShapeSchema_PGeom_BezierSurface | |
| ShapeSchema_PGeom_BoundedCurve | |
| ShapeSchema_PGeom_BoundedSurface | |
| ShapeSchema_PGeom_BSplineCurve | |
| ShapeSchema_PGeom_BSplineSurface | |
| ShapeSchema_PGeom_CartesianPoint | |
| ShapeSchema_PGeom_Circle | |
| ShapeSchema_PGeom_Conic | |
| ShapeSchema_PGeom_ConicalSurface | |
| ShapeSchema_PGeom_Curve | |
| ShapeSchema_PGeom_CylindricalSurface | |
| ShapeSchema_PGeom_Direction | |
| ShapeSchema_PGeom_ElementarySurface | |
| ShapeSchema_PGeom_Ellipse | |
| ShapeSchema_PGeom_Geometry | |
| ShapeSchema_PGeom_Hyperbola | |
| ShapeSchema_PGeom_Line | |
| ShapeSchema_PGeom_OffsetCurve | |
| ShapeSchema_PGeom_OffsetSurface | |
| ShapeSchema_PGeom_Parabola | |
| ShapeSchema_PGeom_Plane | |
| ShapeSchema_PGeom_Point | |
| ShapeSchema_PGeom_RectangularTrimmedSurface | |
| ShapeSchema_PGeom_SphericalSurface | |
| ShapeSchema_PGeom_Surface | |
| ShapeSchema_PGeom_SurfaceOfLinearExtrusion | |
| ShapeSchema_PGeom_SurfaceOfRevolution | |
| ShapeSchema_PGeom_SweptSurface | |
| ShapeSchema_PGeom_ToroidalSurface | |
| ShapeSchema_PGeom_Transformation | |
| ShapeSchema_PGeom_TrimmedCurve | |
| ShapeSchema_PGeom_Vector | |
| ShapeSchema_PGeom_VectorWithMagnitude | |
| ShapeSchema_PMMgt_PManaged | |
| ShapeSchema_PPoly_FieldOfHArray1OfTriangle | |
| ShapeSchema_PPoly_HArray1OfTriangle | |
| ShapeSchema_PPoly_Polygon2D | |
| ShapeSchema_PPoly_Polygon3D | |
| ShapeSchema_PPoly_PolygonOnTriangulation | |
| ShapeSchema_PPoly_Triangle | |
| ShapeSchema_PPoly_Triangulation | |
| ShapeSchema_PTopLoc_Datum3D | |
| ShapeSchema_PTopLoc_ItemLocation | |
| ShapeSchema_PTopLoc_Location | |
| ShapeSchema_PTopoDS_Compound | |
| ShapeSchema_PTopoDS_CompSolid | |
| ShapeSchema_PTopoDS_Edge | |
| ShapeSchema_PTopoDS_Face | |
| ShapeSchema_PTopoDS_FieldOfHArray1OfHShape | |
| ShapeSchema_PTopoDS_FieldOfHArray1OfShape1 | |
| ShapeSchema_PTopoDS_HArray1OfHShape | |
| ShapeSchema_PTopoDS_HArray1OfShape1 | |
| ShapeSchema_PTopoDS_HShape | |
| ShapeSchema_PTopoDS_Shape1 | |
| ShapeSchema_PTopoDS_Shell | |
| ShapeSchema_PTopoDS_Solid | |
| ShapeSchema_PTopoDS_TCompound | |
| ShapeSchema_PTopoDS_TCompound1 | |
| ShapeSchema_PTopoDS_TCompSolid | |
| ShapeSchema_PTopoDS_TCompSolid1 | |
| ShapeSchema_PTopoDS_TEdge | |
| ShapeSchema_PTopoDS_TEdge1 | |
| ShapeSchema_PTopoDS_TFace | |
| ShapeSchema_PTopoDS_TFace1 | |
| ShapeSchema_PTopoDS_TShape | |
| ShapeSchema_PTopoDS_TShape1 | |
| ShapeSchema_PTopoDS_TShell | |
| ShapeSchema_PTopoDS_TShell1 | |
| ShapeSchema_PTopoDS_TSolid | |
| ShapeSchema_PTopoDS_TSolid1 | |
| ShapeSchema_PTopoDS_TVertex | |
| ShapeSchema_PTopoDS_TVertex1 | |
| ShapeSchema_PTopoDS_TWire | |
| ShapeSchema_PTopoDS_TWire1 | |
| ShapeSchema_PTopoDS_Vertex | |
| ShapeSchema_PTopoDS_Wire | |
| ShapeSchema_Standard_Persistent | |
| ShapeSchema_Standard_Storable | |
| ShapeUpgrade | This package provides tools for splitting and converting shapes by some criteria. It provides modifications of the kind when one topological object can be converted or splitted to several ones. In particular this package contains high level API classes which perform: converting geometry of shapes up to given continuity, splitting revolutions by U to segments less than given value, converting to beziers, splitting closed faces |
| ShapeUpgrade_ClosedEdgeDivide | |
| ShapeUpgrade_ClosedFaceDivide | Divides a Face with one or more seam edge to avoid closed faces. Splitting is performed by U and V direction. The number of resulting faces can be defined by user |
| ShapeUpgrade_ConvertCurve2dToBezier | Converts/splits a 2d curve to a list of beziers |
| ShapeUpgrade_ConvertCurve3dToBezier | Converts/splits a 3d curve of any type to a list of beziers |
| ShapeUpgrade_ConvertSurfaceToBezierBasis | Converts a plane, bspline surface, surface of revolution, surface of extrusion, offset surface to grid of bezier basis surface ( bezier surface, surface of revolution based on bezier curve, offset surface based on any previous type) |
| ShapeUpgrade_EdgeDivide | |
| ShapeUpgrade_FaceDivide | Divides a Face (both edges in the wires, by splitting curves and pcurves, and the face itself, by splitting supporting surface) according to splitting criteria |
| ShapeUpgrade_FaceDivideArea | Divides face by max area criterium |
| ShapeUpgrade_FixSmallBezierCurves | |
| ShapeUpgrade_FixSmallCurves | |
| ShapeUpgrade_RemoveInternalWires | Removes all internal wires having area less than specified min area |
| ShapeUpgrade_RemoveLocations | Removes all locations sub-shapes of specified shape |
| ShapeUpgrade_ShapeConvertToBezier | API class for performing conversion of 3D, 2D curves to bezier curves and surfaces to bezier based surfaces ( bezier surface, surface of revolution based on bezier curve, offset surface based on any previous type) |
| ShapeUpgrade_ShapeDivide | Divides a all faces in shell with given criteria Shell |
| ShapeUpgrade_ShapeDivideAngle | Splits all surfaces of revolution, cylindrical, toroidal, conical, spherical surfaces in the given shape so that each resulting segment covers not more than defined number of degrees (to segments less than 90) |
| ShapeUpgrade_ShapeDivideArea | Divides faces from sprcified shape by max area criterium |
| ShapeUpgrade_ShapeDivideClosed | Divides all closed faces in the shape. Class ShapeUpgrade_ClosedFaceDivide is used as divide tool |
| ShapeUpgrade_ShapeDivideClosedEdges | |
| ShapeUpgrade_ShapeDivideContinuity | API Tool for converting shapes with C0 geometry into C1 ones |
| ShapeUpgrade_ShellSewing | This class provides a tool for applying sewing algorithm from BRepBuilderAPI: it takes a shape, calls sewing for each shell, and then replaces sewed shells with use of ShapeBuild_ReShape |
| ShapeUpgrade_SplitCurve | Splits a curve with a criterion |
| ShapeUpgrade_SplitCurve2d | Splits a 2d curve with a criterion |
| ShapeUpgrade_SplitCurve2dContinuity | Corrects/splits a 2d curve with a continuity criterion. Tolerance is used to correct the curve at a knot that respects geometrically the criterion, in order to reduce the multiplicity of the knot |
| ShapeUpgrade_SplitCurve3d | Splits a 3d curve with a criterion |
| ShapeUpgrade_SplitCurve3dContinuity | Corrects/splits a 2d curve with a continuity criterion. Tolerance is used to correct the curve at a knot that respects geometrically the criterion, in order to reduce the multiplicity of the knot |
| ShapeUpgrade_SplitSurface | Splits a Surface with a criterion |
| ShapeUpgrade_SplitSurfaceAngle | Splits a surfaces of revolution, cylindrical, toroidal, conical, spherical so that each resulting segment covers not more than defined number of degrees |
| ShapeUpgrade_SplitSurfaceArea | Split surface in the parametric space in according specified number of splits on the |
| ShapeUpgrade_SplitSurfaceContinuity | Splits a Surface with a continuity criterion. At the present moment C1 criterion is used only. This tool works with tolerance. If C0 surface can be corrected at a knot with given tolerance then the surface is corrected, otherwise it is spltted at that knot |
| ShapeUpgrade_Tool | Tool is a root class for splitting classes Provides context for recording changes, basic precision value and limit (minimal and maximal) values for tolerances |
| ShapeUpgrade_UnifySameDomain | Unifies same domain faces and edges of specified shape |
| ShapeUpgrade_WireDivide | Divides edges in the wire lying on the face or free wires or free edges with a criterion. Splits 3D curve and pcurve(s) of the edge on the face. Other pcurves which may be associated with the edge are simply copied. If 3D curve is splitted then pcurve on the face is splitted as well, and wice-versa. Input shape is not modified. The modifications made are recorded in external context (ShapeBuild_ReShape). This tool is applied to all edges before splitting them in order to keep sharing |
| SortTools_HeapSortOfInteger | |
| SortTools_HeapSortOfReal | |
| SortTools_QuickSortOfInteger | |
| SortTools_QuickSortOfReal | |
| SortTools_ShellSortOfInteger | |
| SortTools_ShellSortOfReal | |
| SortTools_StraightInsertionSortOfInteger | |
| SortTools_StraightInsertionSortOfReal | |
| Standard | |
| Standard_AncestorIterator | The class <AncestorIterator> is a iterator which provides information about inheritance. An AncestorIterator object is used to scan sequentially the hierarchy of a type object from its direct super-type to the root |
| Standard_CLocaleSentry | "xlocale.h" available in Mac OS X and glibc (Linux) for a long time as an extension and become part of POSIX since '2008. Notice that this is impossible to test (_POSIX_C_SOURCE >= 200809L) since POSIX didn't declared such identifier |
| Standard_ErrorHandler | |
| Standard_ErrorHandlerCallback | Defines a base class for callback objects that can be registered in the OCC error handler (the class simulating C++ exceptions) so as to be correctly destroyed when error handler is activated |
| Standard_Failure | Forms the root of the entire exception hierarchy |
| Standard_GUID | |
| Standard_MMgrOpt | Open CASCADE memory manager optimized for speed |
| Standard_MMgrRaw | |
| Standard_MMgrRoot | |
| Standard_MMgrTBBalloc | Implementation of OCC memory manager which uses Intel TBB scalable allocator |
| Standard_Mutex | Mutex: a class to synchronize access to shared data |
| Standard_Persistent | |
| Standard_Static_Assert | Static assert – empty default template |
| Standard_Static_Assert< true > | Static assert – specialization for condition being true |
| Standard_Storable | This class Storable is an abstract class that allows built-in primitive types to be extended. They are not themselves persistent, but are known by the database, therefore can be used to define the internal representation of persistent objects. Otherwise, all the fields of subclasses of Object MUST inherit from Storable |
| Standard_Transient | Abstract class which forms the root of the entire Transient class hierarchy |
| Standard_Type | The class <Type> provides services to find out information about a type defined in CDL |
| StdDrivers | |
| StdDrivers_DocumentRetrievalDriver | Retrieval driver of a Part document |
| StdDrivers_DocumentStorageDriver | Storage driver of a Part document |
| StdLDrivers | |
| StdLDrivers_DocumentRetrievalDriver | Retrieval driver of a Part document |
| StdLDrivers_DocumentStorageDriver | Storage driver of a Part document |
| StdLSchema | |
| StdLSchema_DBC_VArrayOfCharacter | |
| StdLSchema_DBC_VArrayOfExtCharacter | |
| StdLSchema_PCDM_Document | |
| StdLSchema_PCollection_HAsciiString | |
| StdLSchema_PCollection_HExtendedString | |
| StdLSchema_PColStd_FieldOfHArray1OfExtendedString | |
| StdLSchema_PColStd_FieldOfHArray1OfInteger | |
| StdLSchema_PColStd_FieldOfHArray1OfReal | |
| StdLSchema_PColStd_FieldOfHArray2OfInteger | |
| StdLSchema_PColStd_HArray1OfExtendedString | |
| StdLSchema_PColStd_HArray1OfInteger | |
| StdLSchema_PColStd_HArray1OfReal | |
| StdLSchema_PColStd_HArray2OfInteger | |
| StdLSchema_PDataStd_AsciiString | |
| StdLSchema_PDataStd_BooleanArray | |
| StdLSchema_PDataStd_BooleanList | |
| StdLSchema_PDataStd_ByteArray | |
| StdLSchema_PDataStd_ByteArray_1 | |
| StdLSchema_PDataStd_Comment | |
| StdLSchema_PDataStd_Directory | |
| StdLSchema_PDataStd_Expression | |
| StdLSchema_PDataStd_ExtStringArray | |
| StdLSchema_PDataStd_ExtStringArray_1 | |
| StdLSchema_PDataStd_ExtStringList | |
| StdLSchema_PDataStd_FieldOfHArray1OfByte | |
| StdLSchema_PDataStd_FieldOfHArray1OfHArray1OfInteger | |
| StdLSchema_PDataStd_FieldOfHArray1OfHArray1OfReal | |
| StdLSchema_PDataStd_FieldOfHArray1OfHAsciiString | |
| StdLSchema_PDataStd_HArray1OfByte | |
| StdLSchema_PDataStd_HArray1OfHArray1OfInteger | |
| StdLSchema_PDataStd_HArray1OfHArray1OfReal | |
| StdLSchema_PDataStd_HArray1OfHAsciiString | |
| StdLSchema_PDataStd_Integer | |
| StdLSchema_PDataStd_IntegerArray | |
| StdLSchema_PDataStd_IntegerArray_1 | |
| StdLSchema_PDataStd_IntegerList | |
| StdLSchema_PDataStd_IntPackedMap | |
| StdLSchema_PDataStd_IntPackedMap_1 | |
| StdLSchema_PDataStd_Name | |
| StdLSchema_PDataStd_NamedData | |
| StdLSchema_PDataStd_NoteBook | |
| StdLSchema_PDataStd_Real | |
| StdLSchema_PDataStd_RealArray | |
| StdLSchema_PDataStd_RealArray_1 | |
| StdLSchema_PDataStd_RealList | |
| StdLSchema_PDataStd_ReferenceArray | |
| StdLSchema_PDataStd_ReferenceList | |
| StdLSchema_PDataStd_Relation | |
| StdLSchema_PDataStd_Tick | |
| StdLSchema_PDataStd_TreeNode | |
| StdLSchema_PDataStd_UAttribute | |
| StdLSchema_PDataStd_Variable | |
| StdLSchema_PDF_Attribute | |
| StdLSchema_PDF_Data | |
| StdLSchema_PDF_FieldOfHAttributeArray1 | |
| StdLSchema_PDF_HAttributeArray1 | |
| StdLSchema_PDF_Reference | |
| StdLSchema_PDF_TagSource | |
| StdLSchema_PDocStd_Document | |
| StdLSchema_PDocStd_XLink | |
| StdLSchema_PFunction_Function | |
| StdLSchema_Standard_GUID | |
| StdLSchema_Standard_Persistent | |
| StdLSchema_Standard_Storable | |
| StdPrs_Curve | A framework to define display of lines, arcs of circles and conic sections. This is done with a fixed number of points, which can be modified |
| StdPrs_DeflectionCurve | A framework to provide display of any curve with respect to the maximal chordal deviation defined in the Prs3d_Drawer attributes manager |
| StdPrs_HLRPolyShape | Instantiates Prs3d_PolyHLRShape to define a display of a shape where hidden and visible lines are identified with respect to a given projection. StdPrs_HLRPolyShape works with a polyhedral simplification of the shape whereas StdPrs_HLRShape takes the shape itself into account. When you use StdPrs_HLRShape, you obtain an exact result, whereas, when you use StdPrs_HLRPolyShape, you reduce computation time but obtain polygonal segments. The polygonal algorithm is used |
| StdPrs_HLRShape | |
| StdPrs_HLRToolShape | |
| StdPrs_Plane | A framework to display infinite planes |
| StdPrs_PoleCurve | A framework to provide display of Bezier or BSpline curves (by drawing a broken line linking the poles of the curve) |
| StdPrs_ShadedShape | Auxiliary procedures to prepare Shaded presentation of specified shape |
| StdPrs_ShadedSurface | Computes the shading presentation of surfaces. Draws a surface by drawing the isoparametric curves with respect to a maximal chordial deviation. The number of isoparametric curves to be drawn and their color are controlled by the furnished Drawer |
| StdPrs_ToolPoint | |
| StdPrs_ToolRFace | |
| StdPrs_ToolShadedShape | |
| StdPrs_ToolVertex | |
| StdPrs_WFDeflectionRestrictedFace | A framework to provide display of U and V isoparameters of faces, while allowing you to impose a deflection on them. Computes the wireframe presentation of faces with restrictions by displaying a given number of U and/or V isoparametric curves. The isoparametric curves are drawn with respect to a maximal chordial deviation. The presentation includes the restriction curves |
| StdPrs_WFDeflectionShape | |
| StdPrs_WFDeflectionSurface | Draws a surface by drawing the isoparametric curves with respect to a maximal chordial deviation. The number of isoparametric curves to be drawn and their color are controlled by the furnished Drawer |
| StdPrs_WFPoleSurface | Computes the presentation of surfaces by drawing a double network of lines linking the poles of the surface in the two parametric direction. The number of lines to be drawn is controlled by the NetworkNumber of the given Drawer |
| StdPrs_WFRestrictedFace | |
| StdPrs_WFShape | |
| StdPrs_WFSurface | Computes the wireframe presentation of surfaces by displaying a given number of U and/or V isoparametric curves. The isoparametric curves are drawn with respect to a given number of points |
| StdSchema | |
| StdSchema_DBC_VArrayOfCharacter | |
| StdSchema_DBC_VArrayOfExtCharacter | |
| StdSchema_gp_Ax1 | |
| StdSchema_gp_Ax2 | |
| StdSchema_gp_Ax2d | |
| StdSchema_gp_Ax3 | |
| StdSchema_gp_Dir | |
| StdSchema_gp_Dir2d | |
| StdSchema_gp_Mat | |
| StdSchema_gp_Mat2d | |
| StdSchema_gp_Pnt | |
| StdSchema_gp_Pnt2d | |
| StdSchema_gp_Trsf | |
| StdSchema_gp_Trsf2d | |
| StdSchema_gp_Vec | |
| StdSchema_gp_Vec2d | |
| StdSchema_gp_XY | |
| StdSchema_gp_XYZ | |
| StdSchema_PCollection_HAsciiString | |
| StdSchema_PCollection_HExtendedString | |
| StdSchema_PColStd_FieldOfHArray1OfInteger | |
| StdSchema_PColStd_HArray1OfInteger | |
| StdSchema_PDataStd_Integer | |
| StdSchema_PDataStd_Real | |
| StdSchema_PDataXtd_Axis | |
| StdSchema_PDataXtd_Constraint | |
| StdSchema_PDataXtd_Geometry | |
| StdSchema_PDataXtd_PatternStd | |
| StdSchema_PDataXtd_Placement | |
| StdSchema_PDataXtd_Plane | |
| StdSchema_PDataXtd_Point | |
| StdSchema_PDataXtd_Position | |
| StdSchema_PDataXtd_Shape | |
| StdSchema_PDF_Attribute | |
| StdSchema_PDF_FieldOfHAttributeArray1 | |
| StdSchema_PDF_HAttributeArray1 | |
| StdSchema_PNaming_FieldOfHArray1OfNamedShape | |
| StdSchema_PNaming_HArray1OfNamedShape | |
| StdSchema_PNaming_Name | |
| StdSchema_PNaming_Name_1 | |
| StdSchema_PNaming_Name_2 | |
| StdSchema_PNaming_NamedShape | |
| StdSchema_PNaming_Naming | |
| StdSchema_PNaming_Naming_1 | |
| StdSchema_PNaming_Naming_2 | |
| StdSchema_PPrsStd_AISPresentation | |
| StdSchema_PPrsStd_AISPresentation_1 | |
| StdSchema_PTopLoc_Datum3D | |
| StdSchema_PTopLoc_ItemLocation | |
| StdSchema_PTopLoc_Location | |
| StdSchema_PTopoDS_FieldOfHArray1OfShape1 | |
| StdSchema_PTopoDS_HArray1OfShape1 | |
| StdSchema_PTopoDS_Shape1 | |
| StdSchema_PTopoDS_TShape1 | |
| StdSchema_Standard_Persistent | |
| StdSchema_Standard_Storable | |
| StdSelect | The StdSelect package provides the following services |
| StdSelect_BRepOwner | Defines Specific Owners for Sensitive Primitives (Sensitive Segments,Circles...). Used in Dynamic Selection Mechanism. A BRepOwner has an Owner (the shape it represents) and Users (One or More Transient entities). The highlight-unhighlight methods are empty and must be redefined by each User |
| StdSelect_BRepSelectionTool | Tool to create specific selections (sets of primitives) for Shapes from Topology. These Selections may be used in dynamic selection Mechanism Given a Shape and a mode of selection (selection of vertices, edges,faces ...) , This Tool Computes corresponding sensitive primitives, puts them in an entity called Selection (see package SelectMgr) and returns it |
| StdSelect_EdgeFilter | A framework to define a filter to select a specific type of edge. The types available include: |
| StdSelect_FaceFilter | A framework to define a filter to select a specific type of face. The types available include: |
| StdSelect_IndexedDataMapNodeOfIndexedDataMapOfOwnerPrs | |
| StdSelect_IndexedDataMapOfOwnerPrs | |
| StdSelect_Prs | Allows entities owners to be hilighted independantly from PresentableObjects |
| StdSelect_Shape | Presentable shape only for purpose of display for BRepOwner.. |
| StdSelect_ShapeTypeFilter | A filter framework which allows you to define a filter for a specific shape type. The types available include: |
| StdSelect_ViewerSelector3d | Selector Usable by Viewers from V3d |
| StepAP203_ApprovedItem | Representation of STEP SELECT type ApprovedItem |
| StepAP203_Array1OfApprovedItem | |
| StepAP203_Array1OfCertifiedItem | |
| StepAP203_Array1OfChangeRequestItem | |
| StepAP203_Array1OfClassifiedItem | |
| StepAP203_Array1OfContractedItem | |
| StepAP203_Array1OfDateTimeItem | |
| StepAP203_Array1OfPersonOrganizationItem | |
| StepAP203_Array1OfSpecifiedItem | |
| StepAP203_Array1OfStartRequestItem | |
| StepAP203_Array1OfWorkItem | |
| StepAP203_CcDesignApproval | Representation of STEP entity CcDesignApproval |
| StepAP203_CcDesignCertification | Representation of STEP entity CcDesignCertification |
| StepAP203_CcDesignContract | Representation of STEP entity CcDesignContract |
| StepAP203_CcDesignDateAndTimeAssignment | Representation of STEP entity CcDesignDateAndTimeAssignment |
| StepAP203_CcDesignPersonAndOrganizationAssignment | Representation of STEP entity CcDesignPersonAndOrganizationAssignment |
| StepAP203_CcDesignSecurityClassification | Representation of STEP entity CcDesignSecurityClassification |
| StepAP203_CcDesignSpecificationReference | Representation of STEP entity CcDesignSpecificationReference |
| StepAP203_CertifiedItem | Representation of STEP SELECT type CertifiedItem |
| StepAP203_Change | Representation of STEP entity Change |
| StepAP203_ChangeRequest | Representation of STEP entity ChangeRequest |
| StepAP203_ChangeRequestItem | Representation of STEP SELECT type ChangeRequestItem |
| StepAP203_ClassifiedItem | Representation of STEP SELECT type ClassifiedItem |
| StepAP203_ContractedItem | Representation of STEP SELECT type ContractedItem |
| StepAP203_DateTimeItem | Representation of STEP SELECT type DateTimeItem |
| StepAP203_HArray1OfApprovedItem | |
| StepAP203_HArray1OfCertifiedItem | |
| StepAP203_HArray1OfChangeRequestItem | |
| StepAP203_HArray1OfClassifiedItem | |
| StepAP203_HArray1OfContractedItem | |
| StepAP203_HArray1OfDateTimeItem | |
| StepAP203_HArray1OfPersonOrganizationItem | |
| StepAP203_HArray1OfSpecifiedItem | |
| StepAP203_HArray1OfStartRequestItem | |
| StepAP203_HArray1OfWorkItem | |
| StepAP203_PersonOrganizationItem | Representation of STEP SELECT type PersonOrganizationItem |
| StepAP203_SpecifiedItem | Representation of STEP SELECT type SpecifiedItem |
| StepAP203_StartRequest | Representation of STEP entity StartRequest |
| StepAP203_StartRequestItem | Representation of STEP SELECT type StartRequestItem |
| StepAP203_StartWork | Representation of STEP entity StartWork |
| StepAP203_WorkItem | Representation of STEP SELECT type WorkItem |
| StepAP209_Construct | Basic tool for working with AP209 model |
| StepAP214 | Complete AP214 CC1 , Revision 4 Upgrading from Revision 2 to Revision 4 : 26 Mar 1997 Splitting in sub-schemas : 5 Nov 1997 |
| StepAP214_AppliedApprovalAssignment | |
| StepAP214_AppliedDateAndTimeAssignment | |
| StepAP214_AppliedDateAssignment | |
| StepAP214_AppliedDocumentReference | |
| StepAP214_AppliedExternalIdentificationAssignment | Representation of STEP entity AppliedExternalIdentificationAssignment |
| StepAP214_AppliedGroupAssignment | Representation of STEP entity AppliedGroupAssignment |
| StepAP214_AppliedOrganizationAssignment | |
| StepAP214_AppliedPersonAndOrganizationAssignment | |
| StepAP214_AppliedPresentedItem | |
| StepAP214_AppliedSecurityClassificationAssignment | |
| StepAP214_ApprovalItem | |
| StepAP214_Array1OfApprovalItem | |
| StepAP214_Array1OfAutoDesignDateAndPersonItem | |
| StepAP214_Array1OfAutoDesignDateAndTimeItem | |
| StepAP214_Array1OfAutoDesignDatedItem | |
| StepAP214_Array1OfAutoDesignGeneralOrgItem | |
| StepAP214_Array1OfAutoDesignGroupedItem | |
| StepAP214_Array1OfAutoDesignPresentedItemSelect | |
| StepAP214_Array1OfAutoDesignReferencingItem | |
| StepAP214_Array1OfDateAndTimeItem | |
| StepAP214_Array1OfDateItem | |
| StepAP214_Array1OfDocumentReferenceItem | |
| StepAP214_Array1OfExternalIdentificationItem | |
| StepAP214_Array1OfGroupItem | |
| StepAP214_Array1OfOrganizationItem | |
| StepAP214_Array1OfPersonAndOrganizationItem | |
| StepAP214_Array1OfPresentedItemSelect | |
| StepAP214_Array1OfSecurityClassificationItem | |
| StepAP214_AutoDesignActualDateAndTimeAssignment | |
| StepAP214_AutoDesignActualDateAssignment | |
| StepAP214_AutoDesignApprovalAssignment | |
| StepAP214_AutoDesignDateAndPersonAssignment | |
| StepAP214_AutoDesignDateAndPersonItem | |
| StepAP214_AutoDesignDateAndTimeItem | |
| StepAP214_AutoDesignDatedItem | |
| StepAP214_AutoDesignDocumentReference | |
| StepAP214_AutoDesignGeneralOrgItem | |
| StepAP214_AutoDesignGroupAssignment | |
| StepAP214_AutoDesignGroupedItem | |
| StepAP214_AutoDesignNominalDateAndTimeAssignment | |
| StepAP214_AutoDesignNominalDateAssignment | |
| StepAP214_AutoDesignOrganizationAssignment | |
| StepAP214_AutoDesignOrganizationItem | |
| StepAP214_AutoDesignPersonAndOrganizationAssignment | |
| StepAP214_AutoDesignPresentedItem | |
| StepAP214_AutoDesignPresentedItemSelect | |
| StepAP214_AutoDesignReferencingItem | |
| StepAP214_AutoDesignSecurityClassificationAssignment | |
| StepAP214_Class | Representation of STEP entity Class |
| StepAP214_DateAndTimeItem | |
| StepAP214_DateItem | |
| StepAP214_DocumentReferenceItem | |
| StepAP214_ExternalIdentificationItem | Representation of STEP SELECT type ExternalIdentificationItem |
| StepAP214_ExternallyDefinedClass | Representation of STEP entity ExternallyDefinedClass |
| StepAP214_ExternallyDefinedGeneralProperty | Representation of STEP entity ExternallyDefinedGeneralProperty |
| StepAP214_GroupItem | |
| StepAP214_HArray1OfApprovalItem | |
| StepAP214_HArray1OfAutoDesignDateAndPersonItem | |
| StepAP214_HArray1OfAutoDesignDateAndTimeItem | |
| StepAP214_HArray1OfAutoDesignDatedItem | |
| StepAP214_HArray1OfAutoDesignGeneralOrgItem | |
| StepAP214_HArray1OfAutoDesignGroupedItem | |
| StepAP214_HArray1OfAutoDesignPresentedItemSelect | |
| StepAP214_HArray1OfAutoDesignReferencingItem | |
| StepAP214_HArray1OfDateAndTimeItem | |
| StepAP214_HArray1OfDateItem | |
| StepAP214_HArray1OfDocumentReferenceItem | |
| StepAP214_HArray1OfExternalIdentificationItem | |
| StepAP214_HArray1OfGroupItem | |
| StepAP214_HArray1OfOrganizationItem | |
| StepAP214_HArray1OfPersonAndOrganizationItem | |
| StepAP214_HArray1OfPresentedItemSelect | |
| StepAP214_HArray1OfSecurityClassificationItem | |
| StepAP214_OrganizationItem | |
| StepAP214_PersonAndOrganizationItem | |
| StepAP214_PresentedItemSelect | |
| StepAP214_Protocol | Protocol for StepAP214 Entities It requires StepAP214 as a Resource |
| StepAP214_RepItemGroup | Representation of STEP entity RepItemGroup |
| StepAP214_SecurityClassificationItem | |
| StepBasic_Action | Representation of STEP entity Action |
| StepBasic_ActionAssignment | Representation of STEP entity ActionAssignment |
| StepBasic_ActionMethod | Representation of STEP entity ActionMethod |
| StepBasic_ActionRequestAssignment | Representation of STEP entity ActionRequestAssignment |
| StepBasic_ActionRequestSolution | Representation of STEP entity ActionRequestSolution |
| StepBasic_Address | |
| StepBasic_ApplicationContext | |
| StepBasic_ApplicationContextElement | |
| StepBasic_ApplicationProtocolDefinition | |
| StepBasic_Approval | |
| StepBasic_ApprovalAssignment | |
| StepBasic_ApprovalDateTime | Added from StepBasic Rev2 to Rev4 |
| StepBasic_ApprovalPersonOrganization | |
| StepBasic_ApprovalRelationship | |
| StepBasic_ApprovalRole | |
| StepBasic_ApprovalStatus | |
| StepBasic_AreaUnit | |
| StepBasic_Array1OfApproval | |
| StepBasic_Array1OfDerivedUnitElement | |
| StepBasic_Array1OfDocument | |
| StepBasic_Array1OfNamedUnit | |
| StepBasic_Array1OfOrganization | |
| StepBasic_Array1OfPerson | |
| StepBasic_Array1OfProduct | |
| StepBasic_Array1OfProductContext | |
| StepBasic_Array1OfProductDefinition | |
| StepBasic_Array1OfUncertaintyMeasureWithUnit | |
| StepBasic_CalendarDate | |
| StepBasic_Certification | Representation of STEP entity Certification |
| StepBasic_CertificationAssignment | Representation of STEP entity CertificationAssignment |
| StepBasic_CertificationType | Representation of STEP entity CertificationType |
| StepBasic_CharacterizedObject | Representation of STEP entity CharacterizedObject |
| StepBasic_Contract | Representation of STEP entity Contract |
| StepBasic_ContractAssignment | Representation of STEP entity ContractAssignment |
| StepBasic_ContractType | Representation of STEP entity ContractType |
| StepBasic_ConversionBasedUnit | |
| StepBasic_ConversionBasedUnitAndAreaUnit | |
| StepBasic_ConversionBasedUnitAndLengthUnit | |
| StepBasic_ConversionBasedUnitAndMassUnit | |
| StepBasic_ConversionBasedUnitAndPlaneAngleUnit | |
| StepBasic_ConversionBasedUnitAndRatioUnit | |
| StepBasic_ConversionBasedUnitAndSolidAngleUnit | |
| StepBasic_ConversionBasedUnitAndTimeUnit | |
| StepBasic_ConversionBasedUnitAndVolumeUnit | |
| StepBasic_CoordinatedUniversalTimeOffset | |
| StepBasic_Date | |
| StepBasic_DateAndTime | |
| StepBasic_DateAndTimeAssignment | |
| StepBasic_DateAssignment | |
| StepBasic_DateRole | |
| StepBasic_DateTimeRole | |
| StepBasic_DateTimeSelect | |
| StepBasic_DerivedUnit | Added from StepBasic Rev2 to Rev4 |
| StepBasic_DerivedUnitElement | Added from StepBasic Rev2 to Rev4 |
| StepBasic_DesignContext | Class added to Schema AP214 around April 1996 |
| StepBasic_DigitalDocument | |
| StepBasic_DimensionalExponents | |
| StepBasic_Document | Representation of STEP entity Document |
| StepBasic_DocumentFile | Representation of STEP entity DocumentFile |
| StepBasic_DocumentProductAssociation | Representation of STEP entity DocumentProductAssociation |
| StepBasic_DocumentProductEquivalence | Representation of STEP entity DocumentProductEquivalence |
| StepBasic_DocumentReference | |
| StepBasic_DocumentRelationship | |
| StepBasic_DocumentRepresentationType | Representation of STEP entity DocumentRepresentationType |
| StepBasic_DocumentType | |
| StepBasic_DocumentUsageConstraint | |
| StepBasic_Effectivity | |
| StepBasic_EffectivityAssignment | Representation of STEP entity EffectivityAssignment |
| StepBasic_EulerAngles | Representation of STEP entity EulerAngles |
| StepBasic_ExternalIdentificationAssignment | Representation of STEP entity ExternalIdentificationAssignment |
| StepBasic_ExternallyDefinedItem | Representation of STEP entity ExternallyDefinedItem |
| StepBasic_ExternalSource | Representation of STEP entity ExternalSource |
| StepBasic_GeneralProperty | Representation of STEP entity GeneralProperty |
| StepBasic_Group | Representation of STEP entity Group |
| StepBasic_GroupAssignment | Representation of STEP entity GroupAssignment |
| StepBasic_GroupRelationship | Representation of STEP entity GroupRelationship |
| StepBasic_HArray1OfApproval | |
| StepBasic_HArray1OfDerivedUnitElement | |
| StepBasic_HArray1OfDocument | |
| StepBasic_HArray1OfNamedUnit | |
| StepBasic_HArray1OfOrganization | |
| StepBasic_HArray1OfPerson | |
| StepBasic_HArray1OfProduct | |
| StepBasic_HArray1OfProductContext | |
| StepBasic_HArray1OfProductDefinition | |
| StepBasic_HArray1OfUncertaintyMeasureWithUnit | |
| StepBasic_IdentificationAssignment | Representation of STEP entity IdentificationAssignment |
| StepBasic_IdentificationRole | Representation of STEP entity IdentificationRole |
| StepBasic_LengthMeasureWithUnit | |
| StepBasic_LengthUnit | |
| StepBasic_LocalTime | |
| StepBasic_MassMeasureWithUnit | |
| StepBasic_MassUnit | Representation of STEP entity MassUnit |
| StepBasic_MeasureValueMember | For Select MeasureValue, i.e. : length_measure,time_measure,plane_angle_measure, solid_angle_measure,ratio_measure,parameter_value, context_dependent_measure,positive_length_measure, positive_plane_angle_measure,positive_ratio_measure, area_measure,volume_measure |
| StepBasic_MeasureWithUnit | |
| StepBasic_MechanicalContext | |
| StepBasic_NameAssignment | Representation of STEP entity NameAssignment |
| StepBasic_NamedUnit | |
| StepBasic_ObjectRole | Representation of STEP entity ObjectRole |
| StepBasic_OrdinalDate | |
| StepBasic_Organization | |
| StepBasic_OrganizationalAddress | |
| StepBasic_OrganizationAssignment | |
| StepBasic_OrganizationRole | |
| StepBasic_Person | |
| StepBasic_PersonalAddress | |
| StepBasic_PersonAndOrganization | |
| StepBasic_PersonAndOrganizationAssignment | |
| StepBasic_PersonAndOrganizationRole | |
| StepBasic_PersonOrganizationSelect | |
| StepBasic_PhysicallyModeledProductDefinition | |
| StepBasic_PlaneAngleMeasureWithUnit | |
| StepBasic_PlaneAngleUnit | |
| StepBasic_Product | |
| StepBasic_ProductCategory | |
| StepBasic_ProductCategoryRelationship | Representation of STEP entity ProductCategoryRelationship |
| StepBasic_ProductConceptContext | Representation of STEP entity ProductConceptContext |
| StepBasic_ProductContext | |
| StepBasic_ProductDefinition | |
| StepBasic_ProductDefinitionContext | |
| StepBasic_ProductDefinitionEffectivity | |
| StepBasic_ProductDefinitionFormation | |
| StepBasic_ProductDefinitionFormationRelationship | Representation of STEP entity ProductDefinitionFormationRelationship |
| StepBasic_ProductDefinitionFormationWithSpecifiedSource | |
| StepBasic_ProductDefinitionRelationship | Representation of STEP entity ProductDefinitionRelationship |
| StepBasic_ProductDefinitionWithAssociatedDocuments | |
| StepBasic_ProductOrFormationOrDefinition | Representation of STEP SELECT type ProductOrFormationOrDefinition |
| StepBasic_ProductRelatedProductCategory | |
| StepBasic_ProductType | |
| StepBasic_RatioMeasureWithUnit | |
| StepBasic_RatioUnit | |
| StepBasic_RoleAssociation | Representation of STEP entity RoleAssociation |
| StepBasic_RoleSelect | Representation of STEP SELECT type RoleSelect |
| StepBasic_SecurityClassification | |
| StepBasic_SecurityClassificationAssignment | |
| StepBasic_SecurityClassificationLevel | |
| StepBasic_SiUnit | |
| StepBasic_SiUnitAndAreaUnit | |
| StepBasic_SiUnitAndLengthUnit | |
| StepBasic_SiUnitAndMassUnit | |
| StepBasic_SiUnitAndPlaneAngleUnit | |
| StepBasic_SiUnitAndRatioUnit | |
| StepBasic_SiUnitAndSolidAngleUnit | |
| StepBasic_SiUnitAndThermodynamicTemperatureUnit | |
| StepBasic_SiUnitAndTimeUnit | |
| StepBasic_SiUnitAndVolumeUnit | |
| StepBasic_SizeMember | For immediate members of SizeSelect, i.e. : ParameterValue (a Real) |
| StepBasic_SizeSelect | |
| StepBasic_SolidAngleMeasureWithUnit | |
| StepBasic_SolidAngleUnit | |
| StepBasic_SourceItem | Representation of STEP SELECT type SourceItem |
| StepBasic_ThermodynamicTemperatureUnit | Representation of STEP entity ThermodynamicTemperatureUnit |
| StepBasic_TimeMeasureWithUnit | |
| StepBasic_TimeUnit | |
| StepBasic_UncertaintyMeasureWithUnit | |
| StepBasic_Unit | Implements a select type unit (NamedUnit or DerivedUnit) |
| StepBasic_VersionedActionRequest | Representation of STEP entity VersionedActionRequest |
| StepBasic_VolumeUnit | |
| StepBasic_WeekOfYearAndDayDate | |
| STEPCAFControl_ActorWrite | Extends ActorWrite from STEPControl by analysis of whether shape is assembly (based on information from DECAF) |
| STEPCAFControl_Controller | Extends Controller from STEPControl in order to provide ActorWrite adapted for writing assemblies from DECAF Note that ActorRead from STEPControl is used for reading (inherited automatically) |
| STEPCAFControl_DataMapIteratorOfDataMapOfLabelExternFile | |
| STEPCAFControl_DataMapIteratorOfDataMapOfLabelShape | |
| STEPCAFControl_DataMapIteratorOfDataMapOfPDExternFile | |
| STEPCAFControl_DataMapIteratorOfDataMapOfSDRExternFile | |
| STEPCAFControl_DataMapIteratorOfDataMapOfShapePD | |
| STEPCAFControl_DataMapIteratorOfDataMapOfShapeSDR | |
| STEPCAFControl_DataMapNodeOfDataMapOfLabelExternFile | |
| STEPCAFControl_DataMapNodeOfDataMapOfLabelShape | |
| STEPCAFControl_DataMapNodeOfDataMapOfPDExternFile | |
| STEPCAFControl_DataMapNodeOfDataMapOfSDRExternFile | |
| STEPCAFControl_DataMapNodeOfDataMapOfShapePD | |
| STEPCAFControl_DataMapNodeOfDataMapOfShapeSDR | |
| STEPCAFControl_DataMapOfLabelExternFile | |
| STEPCAFControl_DataMapOfLabelShape | |
| STEPCAFControl_DataMapOfPDExternFile | |
| STEPCAFControl_DataMapOfSDRExternFile | |
| STEPCAFControl_DataMapOfShapePD | |
| STEPCAFControl_DataMapOfShapeSDR | |
| STEPCAFControl_DictionaryOfExternFile | |
| STEPCAFControl_ExternFile | Auxiliary class serving as container for data resulting from translation of external file |
| STEPCAFControl_IteratorOfDictionaryOfExternFile | |
| STEPCAFControl_Reader | Provides a tool to read STEP file and put it into DECAF document. Besides transfer of shapes (including assemblies) provided by STEPControl, supports also colors and part names |
| STEPCAFControl_StackItemOfDictionaryOfExternFile | |
| STEPCAFControl_Writer | Provides a tool to write DECAF document to the STEP file. Besides transfer of shapes (including assemblies) provided by STEPControl, supports also colors and part names |
| STEPConstruct | Defines tools for creation and investigation STEP constructs used for representing various kinds of data, such as product and assembly structure, unit contexts, associated information The creation of these structures is made according to currently active schema (AP203 or AP214 CD2 or DIS) This is taken from parameter write.step.schema |
| STEPConstruct_AP203Context | Maintains context specific for AP203 (required data and management information such as persons, dates, approvals etc.) It contains static entities (which can be shared), default values for person and organisation, and also provides tool for creating management entities around specific part (SDR) |
| STEPConstruct_Assembly | This operator creates and checks an item of an assembly, from its basic data : a ShapeRepresentation, a Location .. |
| STEPConstruct_ContextTool | Maintains global context tool for writing. Gives access to Product Definition Context (one per Model) Maintains ApplicationProtocolDefinition entity (common for all products) Also maintains context specific for AP203 and provides set of methods to work with various STEP constructs as required by Actor |
| STEPConstruct_DataMapIteratorOfDataMapOfAsciiStringTransient | |
| STEPConstruct_DataMapIteratorOfDataMapOfPointTransient | |
| STEPConstruct_DataMapNodeOfDataMapOfAsciiStringTransient | |
| STEPConstruct_DataMapNodeOfDataMapOfPointTransient | |
| STEPConstruct_DataMapOfAsciiStringTransient | |
| STEPConstruct_DataMapOfPointTransient | |
| STEPConstruct_ExternRefs | Provides a tool for analyzing (reading) and creating (writing) references to external files in STEP |
| STEPConstruct_Part | Provides tools for creating STEP structures associated with part (SDR), such as PRODUCT, PDF etc., as requied by current schema Also allows to investigate and modify this data |
| STEPConstruct_PointHasher | |
| STEPConstruct_Styles | Provides a mechanism for reading and writing shape styles (such as color) to and from the STEP file This tool maintains a list of styles, either taking them from STEP model (reading), or filling it by calls to AddStyle or directly (writing). Some methods deal with general structures of styles and presentations in STEP, but there are methods which deal with particular implementation of colors (as described in RP) |
| STEPConstruct_Tool | Provides basic functionalities for tools which are intended for encoding/decoding specific STEP constructs |
| STEPConstruct_UnitContext | Tool for creation (encoding) and decoding (for writing and reading accordingly) context defining units and tolerances (uncerntanties) |
| STEPConstruct_ValidationProps | This class provides tools for access (write and read) the validation properties on shapes in the STEP file. These are surface area, solid volume and centroid |
| STEPControl_ActorRead | This class performs the transfer of an Entity from AP214 and AP203, either Geometric or Topologic |
| STEPControl_ActorWrite | This class performs the transfer of a Shape from TopoDS to AP203 or AP214 (CD2 or DIS) |
| STEPControl_Controller | Defines basic controller for STEP processor |
| STEPControl_Reader | Reads STEP files, checks them and translates their contents into Open CASCADE models. The STEP data can be that of a whole model or that of a specific list of entities in the model. As in XSControl_Reader, you specify the list using a selection. For the translation of iges files it is possible to use next sequence: To change translation parameters class Interface_Static should be used before beginning of translation (see STEP Parameters and General Parameters) Creation of reader - STEPControl_Reader reader; To load s file in a model use method reader.ReadFile("filename.stp") To print load results reader.PrintCheckLoad(failsonly,mode) where mode is equal to the value of enumeration IFSelect_PrintCount For definition number of candidates : Standard_Integer nbroots = reader. NbRootsForTransfer(); To transfer entities from a model the following methods can be used: for the whole model - reader.TransferRoots(); to transfer a list of entities: reader.TransferList(list); to transfer one entity Handle(Standard_Transient) ent = reader.RootForTransfer(num); reader.TransferEntity(ent), or reader.TransferOneRoot(num), or reader.TransferOne(num), or reader.TransferRoot(num) To obtain the result the following method can be used: reader.NbShapes() and reader.Shape(num); or reader.OneShape(); To print the results of transfer use method: reader.PrintCheckTransfer(failwarn,mode); where printfail is equal to the value of enumeration IFSelect_PrintFail, mode see above; or reader.PrintStatsTransfer(); Gets correspondence between a STEP entity and a result shape obtained from it. Handle(XSControl_WorkSession) WS = reader.WS(); if ( WS->TransferReader()->HasResult(ent) ) TopoDS_Shape shape = WS->TransferReader()->ShapeResult(ent); |
| STEPControl_Writer | This class creates and writes STEP files from Open CASCADE models. A STEP file can be written to an existing STEP file or to a new one. Translation can be performed in one or several operations. Each translation operation outputs a distinct root entity in the STEP file |
| StepData | Gives basic data definition for Step Interface. Any class of a data model described in EXPRESS Language is candidate to be managed by a Step Interface |
| StepData_Array1OfField | |
| StepData_DefaultGeneral | DefaultGeneral defines a GeneralModule which processes Unknown Entity from StepData only |
| StepData_DescrGeneral | Works with a Protocol by considering its entity descriptions |
| StepData_Described | General frame to describe entities with Description (Simple or Complex) |
| StepData_DescrProtocol | A DescrProtocol is a protocol dynamically (at execution time) defined with : |
| StepData_DescrReadWrite | |
| StepData_ECDescr | Describes a Complex Entity (Plex) as a list of Simple ones |
| StepData_EDescr | This class is intended to describe the authorized form for an entity, either Simple or Plex |
| StepData_EnumTool | This class gives a way of conversion between the value of an enumeration and its representation in STEP An enumeration corresponds to an integer with reserved values, which begin to 0 In STEP, it is represented by a name in capital letter and limited by two dots, e.g. .UNKNOWN |
| StepData_ESDescr | This class is intended to describe the authorized form for a Simple (not Plex) Entity, as a list of fields |
| StepData_Field | Defines a generally defined Field for STEP data : can be used either in any kind of entity to implement it or in free format entities in a "late-binding" mode A field can have : no value (or derived), a single value of any kind, a list of value : single or double list |
| StepData_FieldList | Describes a list of fields, in a general way This basic class is for a null size list Subclasses are for 1, N (fixed) or Dynamic sizes |
| StepData_FieldList1 | Describes a list of ONE field |
| StepData_FieldListD | Describes a list of fields, in a general way This basic class is for a null size list Subclasses are for 1, N (fixed) or Dynamic sizes |
| StepData_FieldListN | Describes a list of fields, in a general way This basic class is for a null size list Subclasses are for 1, N (fixed) or Dynamic sizes |
| StepData_FileProtocol | A FileProtocol is defined as the addition of several already existing Protocols. It corresponds to the definition of a SchemaName with several Names, each one being attached to a specific Protocol. Thus, a File defined with a compound Schema is processed as any other one, once built the equivalent compound Protocol, a FileProtocol |
| StepData_FileRecognizer | |
| StepData_FreeFormEntity | A Free Form Entity allows to record any kind of STEP parameters, in any way of typing It is implemented with an array of fields A Complex entity can be defined, as a chain of FreeFormEntity (see Next and As) |
| StepData_GeneralModule | Specific features for General Services adapted to STEP |
| StepData_GlobalNodeOfWriterLib | |
| StepData_HArray1OfField | |
| StepData_HeaderTool | HeaderTool exploits data from Header to build a Protocol : it uses the Header Entity FileSchema to do this. It builds a Protocol from the Global List of Protocols stored in the Library ReaderLib |
| StepData_NodeOfWriterLib | |
| StepData_PDescr | This class is intended to describe the authorized form for a parameter, as a type or a value for a field |
| StepData_Plex | A Plex (for Complex) Entity is defined as a list of Simple Members ("external mapping") The types of these members must be in alphabetic order |
| StepData_Protocol | Description of Basic Protocol for Step The class Protocol from StepData itself describes a default Protocol, which recognizes only UnknownEntities. Sub-classes will redefine CaseNumber and, if necessary, NbResources and Resources |
| StepData_ReadWriteModule | Defines basic File Access Module (Recognize, Read, Write) That is : ReaderModule (Recognize & Read) + Write for StepWriter (for a more centralized description) Warning : A sub-class of ReadWriteModule, which belongs to a particular Protocol, must use the same definition for Case Numbers (give the same Value for a StepType defined as a String from a File as the Protocol does for the corresponding Entity) |
| StepData_SelectArrReal | |
| StepData_SelectInt | A SelectInt is a SelectMember specialised for a basic integer type in a select which also accepts entities : this one has NO NAME. For a named select, see SelectNamed |
| StepData_SelectMember | The general form for a Select Member. A Select Member can, either define a value of a basic type (such as an integer) with an additional information : a name or list of names which precise the meaning of this value or be an alternate value in a select, which also accepts an entity (in this case, the name is not mandatory) |
| StepData_SelectNamed | This select member can be of any kind, and be named But its takes more memory than some specialised ones This class allows one name for the instance |
| StepData_SelectReal | A SelectReal is a SelectMember specialised for a basic real type in a select which also accepts entities : this one has NO NAME For a named select, see SelectNamed |
| StepData_SelectType | SelectType is the basis used for SELECT_TYPE definitions from the EXPRESS form. A SELECT_TYPE in EXPRESS is an enumeration of Types, it corresponds in a way to a Super-Type, but with no specific Methods, and no exclusivity (a given Type can be member of several SELECT_TYPES, plus be itself a SUB_TYPE) |
| StepData_Simple | A Simple Entity is defined by a type (which can heve super types) and a list of parameters |
| StepData_StepDumper | Provides a way to dump entities processed through STEP, with these features : |
| StepData_StepModel | Gives access to |
| StepData_StepReaderData | Specific FileReaderData for Step Contains litteral description of entities (for each one : type as a string, ident, parameter list) provides references evaluation, plus access to litteral data and specific access methods (Boolean, XY, XYZ) |
| StepData_StepReaderTool | Specific FileReaderTool for Step; works with FileReaderData provides references evaluation, plus access to litteral data and specific methods defined by FileReaderTool Remarks : works with a ReaderLib to load Entities |
| StepData_StepWriter | Manages atomic file writing, under control of StepModel (for general organisation of file) and each class of Transient (for its own parameters) : prepares text to be written then writes it A stream cannot be used because Step limits line length at 72 In more, a specific object offers more appropriate functions |
| StepData_UndefinedEntity | Undefined entity specific to Step Interface, in which StepType is defined at each instance, or is a SubList of another one Uses an UndefinedContent, that from Interface is suitable. Also an Entity defined by STEP can be "Complex Type" (see ANDOR clause in Express) |
| StepData_WriterLib | |
| StepDimTol_AngularityTolerance | Representation of STEP entity AngularityTolerance |
| StepDimTol_Array1OfDatumReference | |
| StepDimTol_CircularRunoutTolerance | Representation of STEP entity CircularRunoutTolerance |
| StepDimTol_CoaxialityTolerance | Representation of STEP entity CoaxialityTolerance |
| StepDimTol_CommonDatum | Representation of STEP entity CommonDatum |
| StepDimTol_ConcentricityTolerance | Representation of STEP entity ConcentricityTolerance |
| StepDimTol_CylindricityTolerance | Representation of STEP entity CylindricityTolerance |
| StepDimTol_Datum | Representation of STEP entity Datum |
| StepDimTol_DatumFeature | Representation of STEP entity DatumFeature |
| StepDimTol_DatumReference | Representation of STEP entity DatumReference |
| StepDimTol_DatumTarget | Representation of STEP entity DatumTarget |
| StepDimTol_FlatnessTolerance | Representation of STEP entity FlatnessTolerance |
| StepDimTol_GeometricTolerance | Representation of STEP entity GeometricTolerance |
| StepDimTol_GeometricToleranceRelationship | Representation of STEP entity GeometricToleranceRelationship |
| StepDimTol_GeometricToleranceWithDatumReference | Representation of STEP entity GeometricToleranceWithDatumReference |
| StepDimTol_GeoTolAndGeoTolWthDatRefAndModGeoTolAndPosTol | |
| StepDimTol_HArray1OfDatumReference | |
| StepDimTol_LineProfileTolerance | Representation of STEP entity LineProfileTolerance |
| StepDimTol_ModifiedGeometricTolerance | Representation of STEP entity ModifiedGeometricTolerance |
| StepDimTol_ParallelismTolerance | Representation of STEP entity ParallelismTolerance |
| StepDimTol_PerpendicularityTolerance | Representation of STEP entity PerpendicularityTolerance |
| StepDimTol_PlacedDatumTargetFeature | Representation of STEP entity PlacedDatumTargetFeature |
| StepDimTol_PositionTolerance | Representation of STEP entity PositionTolerance |
| StepDimTol_RoundnessTolerance | Representation of STEP entity RoundnessTolerance |
| StepDimTol_ShapeToleranceSelect | Representation of STEP SELECT type ShapeToleranceSelect |
| StepDimTol_StraightnessTolerance | Representation of STEP entity StraightnessTolerance |
| StepDimTol_SurfaceProfileTolerance | Representation of STEP entity SurfaceProfileTolerance |
| StepDimTol_SymmetryTolerance | Representation of STEP entity SymmetryTolerance |
| StepDimTol_TotalRunoutTolerance | Representation of STEP entity TotalRunoutTolerance |
| STEPEdit | Provides tools to exploit and edit a set of STEP data : editors, selections . |
| STEPEdit_EditContext | EditContext is an Editor fit for Product Definition Context (one per Model) , i.e. : |
| STEPEdit_EditSDR | EditSDR is an Editor fit for a Shape Definition Representation which designates a Product Definition |
| StepElement_AnalysisItemWithinRepresentation | Representation of STEP entity AnalysisItemWithinRepresentation |
| StepElement_Array1OfCurveElementEndReleasePacket | |
| StepElement_Array1OfCurveElementSectionDefinition | |
| StepElement_Array1OfHSequenceOfCurveElementPurposeMember | |
| StepElement_Array1OfHSequenceOfSurfaceElementPurposeMember | |
| StepElement_Array1OfMeasureOrUnspecifiedValue | |
| StepElement_Array1OfSurfaceSection | |
| StepElement_Array1OfVolumeElementPurpose | |
| StepElement_Array1OfVolumeElementPurposeMember | |
| StepElement_Array2OfCurveElementPurposeMember | |
| StepElement_Array2OfSurfaceElementPurpose | |
| StepElement_Array2OfSurfaceElementPurposeMember | |
| StepElement_Curve3dElementDescriptor | Representation of STEP entity Curve3dElementDescriptor |
| StepElement_CurveElementEndReleasePacket | Representation of STEP entity CurveElementEndReleasePacket |
| StepElement_CurveElementFreedom | Representation of STEP SELECT type CurveElementFreedom |
| StepElement_CurveElementFreedomMember | Representation of member for STEP SELECT type CurveElementFreedom |
| StepElement_CurveElementPurpose | Representation of STEP SELECT type CurveElementPurpose |
| StepElement_CurveElementPurposeMember | Representation of member for STEP SELECT type CurveElementPurpose |
| StepElement_CurveElementSectionDefinition | Representation of STEP entity CurveElementSectionDefinition |
| StepElement_CurveElementSectionDerivedDefinitions | Representation of STEP entity CurveElementSectionDerivedDefinitions |
| StepElement_ElementAspect | Representation of STEP SELECT type ElementAspect |
| StepElement_ElementAspectMember | Representation of member for STEP SELECT type ElementAspect |
| StepElement_ElementDescriptor | Representation of STEP entity ElementDescriptor |
| StepElement_ElementMaterial | Representation of STEP entity ElementMaterial |
| StepElement_HArray1OfCurveElementEndReleasePacket | |
| StepElement_HArray1OfCurveElementSectionDefinition | |
| StepElement_HArray1OfHSequenceOfCurveElementPurposeMember | |
| StepElement_HArray1OfHSequenceOfSurfaceElementPurposeMember | |
| StepElement_HArray1OfMeasureOrUnspecifiedValue | |
| StepElement_HArray1OfSurfaceSection | |
| StepElement_HArray1OfVolumeElementPurpose | |
| StepElement_HArray1OfVolumeElementPurposeMember | |
| StepElement_HArray2OfCurveElementPurposeMember | |
| StepElement_HArray2OfSurfaceElementPurpose | |
| StepElement_HArray2OfSurfaceElementPurposeMember | |
| StepElement_HSequenceOfCurveElementPurposeMember | |
| StepElement_HSequenceOfCurveElementSectionDefinition | |
| StepElement_HSequenceOfElementMaterial | |
| StepElement_HSequenceOfSurfaceElementPurposeMember | |
| StepElement_MeasureOrUnspecifiedValue | Representation of STEP SELECT type MeasureOrUnspecifiedValue |
| StepElement_MeasureOrUnspecifiedValueMember | Representation of member for STEP SELECT type MeasureOrUnspecifiedValue |
| StepElement_SequenceNodeOfSequenceOfCurveElementPurposeMember | |
| StepElement_SequenceNodeOfSequenceOfCurveElementSectionDefinition | |
| StepElement_SequenceNodeOfSequenceOfElementMaterial | |
| StepElement_SequenceNodeOfSequenceOfSurfaceElementPurposeMember | |
| StepElement_SequenceOfCurveElementPurposeMember | |
| StepElement_SequenceOfCurveElementSectionDefinition | |
| StepElement_SequenceOfElementMaterial | |
| StepElement_SequenceOfSurfaceElementPurposeMember | |
| StepElement_Surface3dElementDescriptor | Representation of STEP entity Surface3dElementDescriptor |
| StepElement_SurfaceElementProperty | Representation of STEP entity SurfaceElementProperty |
| StepElement_SurfaceElementPurpose | Representation of STEP SELECT type SurfaceElementPurpose |
| StepElement_SurfaceElementPurposeMember | Representation of member for STEP SELECT type SurfaceElementPurpose |
| StepElement_SurfaceSection | Representation of STEP entity SurfaceSection |
| StepElement_SurfaceSectionField | Representation of STEP entity SurfaceSectionField |
| StepElement_SurfaceSectionFieldConstant | Representation of STEP entity SurfaceSectionFieldConstant |
| StepElement_SurfaceSectionFieldVarying | Representation of STEP entity SurfaceSectionFieldVarying |
| StepElement_UniformSurfaceSection | Representation of STEP entity UniformSurfaceSection |
| StepElement_Volume3dElementDescriptor | Representation of STEP entity Volume3dElementDescriptor |
| StepElement_VolumeElementPurpose | Representation of STEP SELECT type VolumeElementPurpose |
| StepElement_VolumeElementPurposeMember | Representation of member for STEP SELECT type VolumeElementPurpose |
| StepFEA_AlignedCurve3dElementCoordinateSystem | Representation of STEP entity AlignedCurve3dElementCoordinateSystem |
| StepFEA_AlignedSurface3dElementCoordinateSystem | Representation of STEP entity AlignedSurface3dElementCoordinateSystem |
| StepFEA_ArbitraryVolume3dElementCoordinateSystem | Representation of STEP entity ArbitraryVolume3dElementCoordinateSystem |
| StepFEA_Array1OfCurveElementEndOffset | |
| StepFEA_Array1OfCurveElementEndRelease | |
| StepFEA_Array1OfCurveElementInterval | |
| StepFEA_Array1OfDegreeOfFreedom | |
| StepFEA_Array1OfElementRepresentation | |
| StepFEA_Array1OfNodeRepresentation | |
| StepFEA_ConstantSurface3dElementCoordinateSystem | Representation of STEP entity ConstantSurface3dElementCoordinateSystem |
| StepFEA_Curve3dElementProperty | Representation of STEP entity Curve3dElementProperty |
| StepFEA_Curve3dElementRepresentation | Representation of STEP entity Curve3dElementRepresentation |
| StepFEA_CurveElementEndCoordinateSystem | Representation of STEP SELECT type CurveElementEndCoordinateSystem |
| StepFEA_CurveElementEndOffset | Representation of STEP entity CurveElementEndOffset |
| StepFEA_CurveElementEndRelease | Representation of STEP entity CurveElementEndRelease |
| StepFEA_CurveElementInterval | Representation of STEP entity CurveElementInterval |
| StepFEA_CurveElementIntervalConstant | Representation of STEP entity CurveElementIntervalConstant |
| StepFEA_CurveElementIntervalLinearlyVarying | Representation of STEP entity CurveElementIntervalLinearlyVarying |
| StepFEA_CurveElementLocation | Representation of STEP entity CurveElementLocation |
| StepFEA_DegreeOfFreedom | Representation of STEP SELECT type DegreeOfFreedom |
| StepFEA_DegreeOfFreedomMember | Representation of member for STEP SELECT type CurveElementFreedom |
| StepFEA_DummyNode | Representation of STEP entity DummyNode |
| StepFEA_ElementGeometricRelationship | Representation of STEP entity ElementGeometricRelationship |
| StepFEA_ElementGroup | Representation of STEP entity ElementGroup |
| StepFEA_ElementOrElementGroup | Representation of STEP SELECT type ElementOrElementGroup |
| StepFEA_ElementRepresentation | Representation of STEP entity ElementRepresentation |
| StepFEA_FeaAreaDensity | Representation of STEP entity FeaAreaDensity |
| StepFEA_FeaAxis2Placement3d | Representation of STEP entity FeaAxis2Placement3d |
| StepFEA_FeaCurveSectionGeometricRelationship | Representation of STEP entity FeaCurveSectionGeometricRelationship |
| StepFEA_FeaGroup | Representation of STEP entity FeaGroup |
| StepFEA_FeaLinearElasticity | Representation of STEP entity FeaLinearElasticity |
| StepFEA_FeaMassDensity | Representation of STEP entity FeaMassDensity |
| StepFEA_FeaMaterialPropertyRepresentation | Representation of STEP entity FeaMaterialPropertyRepresentation |
| StepFEA_FeaMaterialPropertyRepresentationItem | Representation of STEP entity FeaMaterialPropertyRepresentationItem |
| StepFEA_FeaModel | Representation of STEP entity FeaModel |
| StepFEA_FeaModel3d | Representation of STEP entity FeaModel3d |
| StepFEA_FeaModelDefinition | Representation of STEP entity FeaModelDefinition |
| StepFEA_FeaMoistureAbsorption | Representation of STEP entity FeaMoistureAbsorption |
| StepFEA_FeaParametricPoint | Representation of STEP entity FeaParametricPoint |
| StepFEA_FeaRepresentationItem | Representation of STEP entity FeaRepresentationItem |
| StepFEA_FeaSecantCoefficientOfLinearThermalExpansion | Representation of STEP entity FeaSecantCoefficientOfLinearThermalExpansion |
| StepFEA_FeaShellBendingStiffness | Representation of STEP entity FeaShellBendingStiffness |
| StepFEA_FeaShellMembraneBendingCouplingStiffness | Representation of STEP entity FeaShellMembraneBendingCouplingStiffness |
| StepFEA_FeaShellMembraneStiffness | Representation of STEP entity FeaShellMembraneStiffness |
| StepFEA_FeaShellShearStiffness | Representation of STEP entity FeaShellShearStiffness |
| StepFEA_FeaSurfaceSectionGeometricRelationship | Representation of STEP entity FeaSurfaceSectionGeometricRelationship |
| StepFEA_FeaTangentialCoefficientOfLinearThermalExpansion | Representation of STEP entity FeaTangentialCoefficientOfLinearThermalExpansion |
| StepFEA_FreedomAndCoefficient | Representation of STEP entity FreedomAndCoefficient |
| StepFEA_FreedomsList | Representation of STEP entity FreedomsList |
| StepFEA_GeometricNode | Representation of STEP entity GeometricNode |
| StepFEA_HArray1OfCurveElementEndOffset | |
| StepFEA_HArray1OfCurveElementEndRelease | |
| StepFEA_HArray1OfCurveElementInterval | |
| StepFEA_HArray1OfDegreeOfFreedom | |
| StepFEA_HArray1OfElementRepresentation | |
| StepFEA_HArray1OfNodeRepresentation | |
| StepFEA_HSequenceOfCurve3dElementProperty | |
| StepFEA_HSequenceOfElementGeometricRelationship | |
| StepFEA_HSequenceOfElementRepresentation | |
| StepFEA_HSequenceOfNodeRepresentation | |
| StepFEA_Node | Representation of STEP entity Node |
| StepFEA_NodeDefinition | Representation of STEP entity NodeDefinition |
| StepFEA_NodeGroup | Representation of STEP entity NodeGroup |
| StepFEA_NodeRepresentation | Representation of STEP entity NodeRepresentation |
| StepFEA_NodeSet | Representation of STEP entity NodeSet |
| StepFEA_NodeWithSolutionCoordinateSystem | Representation of STEP entity NodeWithSolutionCoordinateSystem |
| StepFEA_NodeWithVector | Representation of STEP entity NodeWithVector |
| StepFEA_ParametricCurve3dElementCoordinateDirection | Representation of STEP entity ParametricCurve3dElementCoordinateDirection |
| StepFEA_ParametricCurve3dElementCoordinateSystem | Representation of STEP entity ParametricCurve3dElementCoordinateSystem |
| StepFEA_ParametricSurface3dElementCoordinateSystem | Representation of STEP entity ParametricSurface3dElementCoordinateSystem |
| StepFEA_SequenceNodeOfSequenceOfCurve3dElementProperty | |
| StepFEA_SequenceNodeOfSequenceOfElementGeometricRelationship | |
| StepFEA_SequenceNodeOfSequenceOfElementRepresentation | |
| StepFEA_SequenceNodeOfSequenceOfNodeRepresentation | |
| StepFEA_SequenceOfCurve3dElementProperty | |
| StepFEA_SequenceOfElementGeometricRelationship | |
| StepFEA_SequenceOfElementRepresentation | |
| StepFEA_SequenceOfNodeRepresentation | |
| StepFEA_Surface3dElementRepresentation | Representation of STEP entity Surface3dElementRepresentation |
| StepFEA_SymmetricTensor22d | Representation of STEP SELECT type SymmetricTensor22d |
| StepFEA_SymmetricTensor23d | Representation of STEP SELECT type SymmetricTensor23d |
| StepFEA_SymmetricTensor23dMember | Representation of member for STEP SELECT type SymmetricTensor23d |
| StepFEA_SymmetricTensor42d | Representation of STEP SELECT type SymmetricTensor42d |
| StepFEA_SymmetricTensor43d | Representation of STEP SELECT type SymmetricTensor43d |
| StepFEA_SymmetricTensor43dMember | Representation of member for STEP SELECT type SymmetricTensor43d |
| StepFEA_Volume3dElementRepresentation | Representation of STEP entity Volume3dElementRepresentation |
| StepGeom_Array1OfBoundaryCurve | |
| StepGeom_Array1OfCartesianPoint | |
| StepGeom_Array1OfCompositeCurveSegment | |
| StepGeom_Array1OfCurve | |
| StepGeom_Array1OfPcurveOrSurface | |
| StepGeom_Array1OfSurfaceBoundary | |
| StepGeom_Array1OfTrimmingSelect | |
| StepGeom_Array2OfCartesianPoint | |
| StepGeom_Array2OfSurfacePatch | |
| StepGeom_Axis1Placement | |
| StepGeom_Axis2Placement | |
| StepGeom_Axis2Placement2d | |
| StepGeom_Axis2Placement3d | |
| StepGeom_BezierCurve | |
| StepGeom_BezierCurveAndRationalBSplineCurve | |
| StepGeom_BezierSurface | |
| StepGeom_BezierSurfaceAndRationalBSplineSurface | |
| StepGeom_BoundaryCurve | |
| StepGeom_BoundedCurve | |
| StepGeom_BoundedSurface | |
| StepGeom_BSplineCurve | |
| StepGeom_BSplineCurveWithKnots | |
| StepGeom_BSplineCurveWithKnotsAndRationalBSplineCurve | |
| StepGeom_BSplineSurface | |
| StepGeom_BSplineSurfaceWithKnots | |
| StepGeom_BSplineSurfaceWithKnotsAndRationalBSplineSurface | |
| StepGeom_CartesianPoint | |
| StepGeom_CartesianTransformationOperator | |
| StepGeom_CartesianTransformationOperator2d | Added from StepGeom Rev2 to Rev4 |
| StepGeom_CartesianTransformationOperator3d | |
| StepGeom_Circle | |
| StepGeom_CompositeCurve | |
| StepGeom_CompositeCurveOnSurface | |
| StepGeom_CompositeCurveSegment | |
| StepGeom_Conic | |
| StepGeom_ConicalSurface | |
| StepGeom_Curve | |
| StepGeom_CurveBoundedSurface | Representation of STEP entity CurveBoundedSurface |
| StepGeom_CurveOnSurface | |
| StepGeom_CurveReplica | |
| StepGeom_CylindricalSurface | |
| StepGeom_DegeneratePcurve | |
| StepGeom_DegenerateToroidalSurface | |
| StepGeom_Direction | |
| StepGeom_ElementarySurface | |
| StepGeom_Ellipse | |
| StepGeom_EvaluatedDegeneratePcurve | |
| StepGeom_GeometricRepresentationContext | |
| StepGeom_GeometricRepresentationContextAndGlobalUnitAssignedContext | |
| StepGeom_GeometricRepresentationContextAndParametricRepresentationContext | |
| StepGeom_GeometricRepresentationItem | |
| StepGeom_GeomRepContextAndGlobUnitAssCtxAndGlobUncertaintyAssCtx | |
| StepGeom_HArray1OfBoundaryCurve | |
| StepGeom_HArray1OfCartesianPoint | |
| StepGeom_HArray1OfCompositeCurveSegment | |
| StepGeom_HArray1OfCurve | |
| StepGeom_HArray1OfPcurveOrSurface | |
| StepGeom_HArray1OfSurfaceBoundary | |
| StepGeom_HArray1OfTrimmingSelect | |
| StepGeom_HArray2OfCartesianPoint | |
| StepGeom_HArray2OfSurfacePatch | |
| StepGeom_Hyperbola | |
| StepGeom_IntersectionCurve | |
| StepGeom_Line | |
| StepGeom_OffsetCurve3d | |
| StepGeom_OffsetSurface | |
| StepGeom_OrientedSurface | Representation of STEP entity OrientedSurface |
| StepGeom_OuterBoundaryCurve | |
| StepGeom_Parabola | |
| StepGeom_Pcurve | |
| StepGeom_PcurveOrSurface | |
| StepGeom_Placement | |
| StepGeom_Plane | |
| StepGeom_Point | |
| StepGeom_PointOnCurve | |
| StepGeom_PointOnSurface | |
| StepGeom_PointReplica | |
| StepGeom_Polyline | |
| StepGeom_QuasiUniformCurve | |
| StepGeom_QuasiUniformCurveAndRationalBSplineCurve | |
| StepGeom_QuasiUniformSurface | |
| StepGeom_QuasiUniformSurfaceAndRationalBSplineSurface | |
| StepGeom_RationalBSplineCurve | |
| StepGeom_RationalBSplineSurface | |
| StepGeom_RectangularCompositeSurface | |
| StepGeom_RectangularTrimmedSurface | |
| StepGeom_ReparametrisedCompositeCurveSegment | |
| StepGeom_SeamCurve | |
| StepGeom_SphericalSurface | |
| StepGeom_Surface | |
| StepGeom_SurfaceBoundary | Representation of STEP SELECT type SurfaceBoundary |
| StepGeom_SurfaceCurve | |
| StepGeom_SurfaceCurveAndBoundedCurve | Complex type: bounded_curve + surface_curve needed for curve_bounded_surfaces (S4132) |
| StepGeom_SurfaceOfLinearExtrusion | |
| StepGeom_SurfaceOfRevolution | |
| StepGeom_SurfacePatch | |
| StepGeom_SurfaceReplica | |
| StepGeom_SweptSurface | |
| StepGeom_ToroidalSurface | |
| StepGeom_TrimmedCurve | |
| StepGeom_TrimmingMember | For immediate members of TrimmingSelect, i.e. : ParameterValue (a Real) |
| StepGeom_TrimmingSelect | |
| StepGeom_UniformCurve | |
| StepGeom_UniformCurveAndRationalBSplineCurve | |
| StepGeom_UniformSurface | |
| StepGeom_UniformSurfaceAndRationalBSplineSurface | |
| StepGeom_Vector | |
| StepGeom_VectorOrDirection | |
| StepRepr_Array1OfMaterialPropertyRepresentation | |
| StepRepr_Array1OfPropertyDefinitionRepresentation | |
| StepRepr_Array1OfRepresentationItem | |
| StepRepr_AssemblyComponentUsage | Representation of STEP entity AssemblyComponentUsage |
| StepRepr_AssemblyComponentUsageSubstitute | |
| StepRepr_CharacterizedDefinition | Representation of STEP SELECT type CharacterizedDefinition |
| StepRepr_CompositeShapeAspect | Added for Dimensional Tolerances |
| StepRepr_CompoundRepresentationItem | Added for Dimensional Tolerances |
| StepRepr_ConfigurationDesign | Representation of STEP entity ConfigurationDesign |
| StepRepr_ConfigurationDesignItem | Representation of STEP SELECT type ConfigurationDesignItem |
| StepRepr_ConfigurationEffectivity | Representation of STEP entity ConfigurationEffectivity |
| StepRepr_ConfigurationItem | Representation of STEP entity ConfigurationItem |
| StepRepr_DataEnvironment | Representation of STEP entity DataEnvironment |
| StepRepr_DefinitionalRepresentation | |
| StepRepr_DerivedShapeAspect | Added for Dimensional Tolerances |
| StepRepr_DescriptiveRepresentationItem | |
| StepRepr_Extension | Added for Dimensional Tolerances |
| StepRepr_ExternallyDefinedRepresentation | |
| StepRepr_FunctionallyDefinedTransformation | |
| StepRepr_GlobalUncertaintyAssignedContext | |
| StepRepr_GlobalUnitAssignedContext | |
| StepRepr_HArray1OfMaterialPropertyRepresentation | |
| StepRepr_HArray1OfPropertyDefinitionRepresentation | |
| StepRepr_HArray1OfRepresentationItem | |
| StepRepr_HSequenceOfMaterialPropertyRepresentation | |
| StepRepr_HSequenceOfRepresentationItem | |
| StepRepr_ItemDefinedTransformation | Added from StepRepr Rev2 to Rev4 |
| StepRepr_MakeFromUsageOption | Representation of STEP entity MakeFromUsageOption |
| StepRepr_MappedItem | |
| StepRepr_MaterialDesignation | |
| StepRepr_MaterialProperty | Representation of STEP entity MaterialProperty |
| StepRepr_MaterialPropertyRepresentation | Representation of STEP entity MaterialPropertyRepresentation |
| StepRepr_MeasureRepresentationItem | Implements a measure_representation_item entity which is used for storing validation properties (e.g. area) for shapes |
| StepRepr_NextAssemblyUsageOccurrence | Representation of STEP entity NextAssemblyUsageOccurrence |
| StepRepr_ParametricRepresentationContext | |
| StepRepr_ProductConcept | Representation of STEP entity ProductConcept |
| StepRepr_ProductDefinitionShape | Representation of STEP entity ProductDefinitionShape |
| StepRepr_ProductDefinitionUsage | Representation of STEP entity ProductDefinitionUsage |
| StepRepr_PromissoryUsageOccurrence | |
| StepRepr_PropertyDefinition | Representation of STEP entity PropertyDefinition |
| StepRepr_PropertyDefinitionRelationship | Representation of STEP entity PropertyDefinitionRelationship |
| StepRepr_PropertyDefinitionRepresentation | Representation of STEP entity PropertyDefinitionRepresentation |
| StepRepr_QuantifiedAssemblyComponentUsage | Representation of STEP entity QuantifiedAssemblyComponentUsage |
| StepRepr_Representation | |
| StepRepr_RepresentationContext | |
| StepRepr_RepresentationItem | |
| StepRepr_RepresentationMap | |
| StepRepr_RepresentationRelationship | |
| StepRepr_RepresentationRelationshipWithTransformation | |
| StepRepr_RepresentedDefinition | Representation of STEP SELECT type RepresentedDefinition |
| StepRepr_ReprItemAndLengthMeasureWithUnit | |
| StepRepr_SequenceNodeOfSequenceOfMaterialPropertyRepresentation | |
| StepRepr_SequenceNodeOfSequenceOfRepresentationItem | |
| StepRepr_SequenceOfMaterialPropertyRepresentation | |
| StepRepr_SequenceOfRepresentationItem | |
| StepRepr_ShapeAspect | |
| StepRepr_ShapeAspectDerivingRelationship | Added for Dimensional Tolerances |
| StepRepr_ShapeAspectRelationship | Representation of STEP entity ShapeAspectRelationship |
| StepRepr_ShapeAspectTransition | Representation of STEP entity ShapeAspectTransition |
| StepRepr_ShapeDefinition | |
| StepRepr_ShapeRepresentationRelationship | |
| StepRepr_ShapeRepresentationRelationshipWithTransformation | |
| StepRepr_SpecifiedHigherUsageOccurrence | Representation of STEP entity SpecifiedHigherUsageOccurrence |
| StepRepr_StructuralResponseProperty | Representation of STEP entity StructuralResponseProperty |
| StepRepr_StructuralResponsePropertyDefinitionRepresentation | Representation of STEP entity StructuralResponsePropertyDefinitionRepresentation |
| StepRepr_SuppliedPartRelationship | |
| StepRepr_Transformation | |
| StepRepr_ValueRange | Added for Dimensional Tolerances |
| StepSelect_Activator | Performs Actions specific to StepSelect, i.e. creation of Step Selections and Counters, plus dumping specific to Step |
| StepSelect_FileModifier | |
| StepSelect_FloatFormat | This class gives control out format for floatting values : ZeroSuppress or no, Main Format, Format in Range (for values around 1.), as StepWriter allows to manage it. Formats are given under C-printf form |
| StepSelect_ModelModifier | |
| StepSelect_StepType | StepType is a Signature specific to Step definitions : it considers the type as defined in STEP Schemas, the same which is used in files. For a Complex Type, if its definition is known, StepType produces the list of basic types, separated by commas, the whole between brackets : "(TYPE1,TYPE2..)". If its precise definition is not known (simply it is known as Complex, it can be recognised, but the list is produced at Write time only), StepType produces : "(..COMPLEX TYPE..)" |
| StepSelect_WorkLibrary | Performs Read and Write a STEP File with a STEP Model Following the protocols, Copy may be implemented or not |
| STEPSelections_AssemblyComponent | |
| STEPSelections_AssemblyExplorer | |
| STEPSelections_AssemblyLink | |
| STEPSelections_Counter | |
| STEPSelections_HSequenceOfAssemblyLink | |
| STEPSelections_SelectAssembly | |
| STEPSelections_SelectDerived | |
| STEPSelections_SelectFaces | This selection returns "STEP faces" |
| STEPSelections_SelectForTransfer | |
| STEPSelections_SelectGSCurves | This selection returns "curves in the geometric_set (except composite curves)" |
| STEPSelections_SelectInstances | |
| STEPSelections_SequenceNodeOfSequenceOfAssemblyComponent | |
| STEPSelections_SequenceNodeOfSequenceOfAssemblyLink | |
| STEPSelections_SequenceOfAssemblyComponent | |
| STEPSelections_SequenceOfAssemblyLink | |
| StepShape_AdvancedBrepShapeRepresentation | |
| StepShape_AdvancedFace | |
| StepShape_AngularLocation | Representation of STEP entity AngularLocation |
| StepShape_AngularSize | Representation of STEP entity AngularSize |
| StepShape_Array1OfConnectedEdgeSet | |
| StepShape_Array1OfConnectedFaceSet | |
| StepShape_Array1OfEdge | |
| StepShape_Array1OfFace | |
| StepShape_Array1OfFaceBound | |
| StepShape_Array1OfGeometricSetSelect | |
| StepShape_Array1OfOrientedClosedShell | |
| StepShape_Array1OfOrientedEdge | |
| StepShape_Array1OfShell | |
| StepShape_Array1OfValueQualifier | |
| StepShape_Block | |
| StepShape_BooleanOperand | |
| StepShape_BooleanResult | |
| StepShape_BoxDomain | |
| StepShape_BoxedHalfSpace | |
| StepShape_BrepWithVoids | |
| StepShape_ClosedShell | |
| StepShape_CompoundShapeRepresentation | Representation of STEP entity CompoundShapeRepresentation |
| StepShape_ConnectedEdgeSet | Representation of STEP entity ConnectedEdgeSet |
| StepShape_ConnectedFaceSet | |
| StepShape_ConnectedFaceShapeRepresentation | Representation of STEP entity ConnectedFaceShapeRepresentation |
| StepShape_ConnectedFaceSubSet | Representation of STEP entity ConnectedFaceSubSet |
| StepShape_ContextDependentShapeRepresentation | |
| StepShape_CsgPrimitive | |
| StepShape_CsgSelect | |
| StepShape_CsgShapeRepresentation | |
| StepShape_CsgSolid | |
| StepShape_DefinitionalRepresentationAndShapeRepresentation | Implements complex type (DEFINITIONAL_REPRESENTATION,REPRESENTATION,SHAPE_REPRESENTATION) |
| StepShape_DimensionalCharacteristic | Representation of STEP SELECT type DimensionalCharacteristic |
| StepShape_DimensionalCharacteristicRepresentation | Representation of STEP entity DimensionalCharacteristicRepresentation |
| StepShape_DimensionalLocation | Representation of STEP entity DimensionalLocation |
| StepShape_DimensionalLocationWithPath | Representation of STEP entity DimensionalLocationWithPath |
| StepShape_DimensionalSize | Representation of STEP entity DimensionalSize |
| StepShape_DimensionalSizeWithPath | Representation of STEP entity DimensionalSizeWithPath |
| StepShape_DirectedDimensionalLocation | Representation of STEP entity DirectedDimensionalLocation |
| StepShape_Edge | |
| StepShape_EdgeBasedWireframeModel | Representation of STEP entity EdgeBasedWireframeModel |
| StepShape_EdgeBasedWireframeShapeRepresentation | Representation of STEP entity EdgeBasedWireframeShapeRepresentation |
| StepShape_EdgeCurve | |
| StepShape_EdgeLoop | |
| StepShape_ExtrudedAreaSolid | |
| StepShape_ExtrudedFaceSolid | |
| StepShape_Face | |
| StepShape_FaceBasedSurfaceModel | Representation of STEP entity FaceBasedSurfaceModel |
| StepShape_FaceBound | |
| StepShape_FaceOuterBound | |
| StepShape_FaceSurface | |
| StepShape_FacetedBrep | |
| StepShape_FacetedBrepAndBrepWithVoids | |
| StepShape_FacetedBrepShapeRepresentation | |
| StepShape_GeometricallyBoundedSurfaceShapeRepresentation | |
| StepShape_GeometricallyBoundedWireframeShapeRepresentation | |
| StepShape_GeometricCurveSet | |
| StepShape_GeometricSet | |
| StepShape_GeometricSetSelect | |
| StepShape_HalfSpaceSolid | |
| StepShape_HArray1OfConnectedEdgeSet | |
| StepShape_HArray1OfConnectedFaceSet | |
| StepShape_HArray1OfEdge | |
| StepShape_HArray1OfFace | |
| StepShape_HArray1OfFaceBound | |
| StepShape_HArray1OfGeometricSetSelect | |
| StepShape_HArray1OfOrientedClosedShell | |
| StepShape_HArray1OfOrientedEdge | |
| StepShape_HArray1OfShell | |
| StepShape_HArray1OfValueQualifier | |
| StepShape_LimitsAndFits | Added for Dimensional Tolerances |
| StepShape_Loop | |
| StepShape_LoopAndPath | |
| StepShape_ManifoldSolidBrep | |
| StepShape_ManifoldSurfaceShapeRepresentation | |
| StepShape_MeasureQualification | Added for Dimensional Tolerances |
| StepShape_MeasureRepresentationItemAndQualifiedRepresentationItem | Added for Dimensional Tolerances Complex Type between MeasureRepresentationItem and QualifiedRepresentationItem |
| StepShape_NonManifoldSurfaceShapeRepresentation | Representation of STEP entity NonManifoldSurfaceShapeRepresentation |
| StepShape_OpenShell | |
| StepShape_OrientedClosedShell | |
| StepShape_OrientedEdge | |
| StepShape_OrientedFace | |
| StepShape_OrientedOpenShell | |
| StepShape_OrientedPath | |
| StepShape_Path | |
| StepShape_PlusMinusTolerance | Added for Dimensional Tolerances |
| StepShape_PointRepresentation | Representation of STEP entity PointRepresentation |
| StepShape_PolyLoop | |
| StepShape_PrecisionQualifier | Added for Dimensional Tolerances |
| StepShape_QualifiedRepresentationItem | Added for Dimensional Tolerances |
| StepShape_ReversibleTopologyItem | |
| StepShape_RevolvedAreaSolid | |
| StepShape_RevolvedFaceSolid | |
| StepShape_RightAngularWedge | |
| StepShape_RightCircularCone | |
| StepShape_RightCircularCylinder | |
| StepShape_SeamEdge | Representation of STEP entity SeamEdge |
| StepShape_ShapeDefinitionRepresentation | Representation of STEP entity ShapeDefinitionRepresentation |
| StepShape_ShapeDimensionRepresentation | Representation of STEP entity ShapeDimensionRepresentation |
| StepShape_ShapeRepresentation | |
| StepShape_ShapeRepresentationWithParameters | Representation of STEP entity ShapeRepresentationWithParameters |
| StepShape_Shell | |
| StepShape_ShellBasedSurfaceModel | |
| StepShape_SolidModel | |
| StepShape_SolidReplica | |
| StepShape_Sphere | |
| StepShape_Subedge | Representation of STEP entity Subedge |
| StepShape_Subface | Representation of STEP entity Subface |
| StepShape_SurfaceModel | |
| StepShape_SweptAreaSolid | |
| StepShape_SweptFaceSolid | |
| StepShape_ToleranceMethodDefinition | Added for Dimensional Tolerances |
| StepShape_ToleranceValue | Added for Dimensional Tolerances |
| StepShape_TopologicalRepresentationItem | |
| StepShape_Torus | |
| StepShape_TransitionalShapeRepresentation | |
| StepShape_TypeQualifier | Added for Dimensional Tolerances |
| StepShape_ValueQualifier | Added for Dimensional Tolerances |
| StepShape_Vertex | |
| StepShape_VertexLoop | |
| StepShape_VertexPoint | |
| StepToGeom_MakeAxis1Placement | This class implements the mapping between classes Axis1Placement from Step and Axis1Placement from Geom |
| StepToGeom_MakeAxis2Placement | This class implements the mapping between classes Axis2Placement from Step and Axis2Placement from Geom |
| StepToGeom_MakeAxisPlacement | This class implements the mapping between classes Axis2Placement2d from Step and AxisPlacement from Geom2d |
| StepToGeom_MakeBoundedCurve | This class implements the mapping between classes BoundedCurve from StepGeom which describes a BoundedCurve from prostep and BoundedCurve from Geom. As BoundedCurve is an abstract BoundedCurve this class is an access to the sub-class required |
| StepToGeom_MakeBoundedCurve2d | This class implements the mapping between classes BoundedCurve from StepGeom which describes a BoundedCurve from prostep and BoundedCurve from Geom2d. As BoundedCurve is an abstract BoundedCurve this class is an access to the sub-class required |
| StepToGeom_MakeBoundedSurface | This class implements the mapping between classes BoundedSurface from StepGeom which describes a BoundedSurface from prostep and the class BoundedSurface from Geom. As BoundedSurface is an abstract BoundedSurface this class is an access to the sub-class required |
| StepToGeom_MakeBSplineCurve | This class implements the mapping between all classes of BSplineCurve from StepGeom and BSplineCurve from Geom |
| StepToGeom_MakeBSplineCurve2d | This class implements the mapping between classes BSplineCurve from StepGeom and BSplineCurve from Geom2d |
| StepToGeom_MakeBSplineSurface | This class implements the mapping between classes BSplineSurface from StepGeom and class BSplineSurface from Geom |
| StepToGeom_MakeCartesianPoint | This class implements the mapping between classes CartesianPoint from StepGeom which describes a point from Prostep and CartesianPoint from Geom |
| StepToGeom_MakeCartesianPoint2d | This class implements the mapping between classes CartesianPoint from StepGeom which describes a point from Prostep and CartesianPoint from Geom2d |
| StepToGeom_MakeCircle | This class implements the mapping between classes Circle from StepGeom which describes a circle from Prostep and Circle from Geom |
| StepToGeom_MakeCircle2d | This class implements the mapping between classes Circle from StepGeom which describes a circle from Prostep and Circle from Geom2d |
| StepToGeom_MakeConic | This class implements the mapping between classes Conic from StepGeom which describes a Conic from prostep and Conic from Geom . As Conic is an abstract class this class is an access to the sub-class required |
| StepToGeom_MakeConic2d | This class implements the mapping between classes Conic from StepGeom which describes a Conic from prostep and Conic from Geom2d. As Conic is an abstract class this class is an access to the sub-class required |
| StepToGeom_MakeConicalSurface | This class implements the mapping between class ConicalSurface from StepGeom which describes a conical_surface from Prostep and ConicalSurface from Geom |
| StepToGeom_MakeCurve | This class implements the mapping between classes class Curve from StepGeom which describes a Curve from prostep and Curve from Geom. As Curve is an abstract class this class an access to the sub-class required |
| StepToGeom_MakeCurve2d | This class implements the mapping between class Curve from StepGeom which describes a Curve from prostep and Curve from Geom2d. As Curve is an abstract class this class an access to the sub-class required |
| StepToGeom_MakeCylindricalSurface | This class implements the mapping between class CylindricalSurface from StepGeom which describes a cylindrical_surface from Prostep and CylindricalSurface from Geom |
| StepToGeom_MakeDirection | This class implements the mapping between classes Direction from StepGeom which describes a direction from Prostep and Direction from Geom |
| StepToGeom_MakeDirection2d | This class implements the mapping between classes Direction from StepGeom which describes a direction from Prostep and Direction from Geom2d |
| StepToGeom_MakeElementarySurface | This class implements the mapping between classes ElementarySurface from StepGeom which describes a ElementarySurface from Step and ElementarySurface from Geom. As ElementarySurface is an abstract Surface this class is an access to the sub-class required |
| StepToGeom_MakeEllipse | This class implements the mapping between classes Ellipse from StepGeom which describes a Ellipse from Prostep and Ellipse from Geom |
| StepToGeom_MakeEllipse2d | This class implements the mapping between classes Ellipse from StepGeom which describes a Ellipse from Prostep and Ellipse from Geom2d |
| StepToGeom_MakeHyperbola | This class implements the mapping between classes Hyperbola from StepGeom which describes a Hyperbola from Prostep and Hyperbola from Geom |
| StepToGeom_MakeHyperbola2d | This class implements the mapping between classes Hyperbola from StepGeom which describes a Hyperbola from Prostep and Hyperbola from Geom2d |
| StepToGeom_MakeLine | This class implements the mapping between classes Line from StepGeom which describes a line from Prostep and Line from Geom |
| StepToGeom_MakeLine2d | This class implements the mapping between classes Line from StepGeom which describes a line from Prostep and Line from Geom2d |
| StepToGeom_MakeParabola | This class implements the mapping between classes Parabola from StepGeom which describes a Parabola from Prostep and Parabola from Geom |
| StepToGeom_MakeParabola2d | This class implements the mapping between classes Parabola from StepGeom which describes a Parabola from Prostep and Parabola from Geom2d |
| StepToGeom_MakePlane | This class implements the mapping between classes Plane from StepGeom which describes a plane from Prostep and Plane form Geom |
| StepToGeom_MakePolyline | Translates polyline entity into Geom_BSpline In case if polyline has more than 2 points bspline will be C0 |
| StepToGeom_MakePolyline2d | Translates Polyline entity into Geom2d_BSpline In case if Polyline has more than 2 points bspline will be C0 |
| StepToGeom_MakeRectangularTrimmedSurface | This class implements the mapping between classes RectangularTrimmedSurface from StepGeom and class RectangularTrimmedSurface from Geom |
| StepToGeom_MakeSphericalSurface | This class implements the mapping between class SphericalSurface from StepGeom which describes a spherical_surface from Prostepand SphericalSurface from Geom |
| StepToGeom_MakeSurface | This class implements the mapping between classes Surface from StepGeom which describes a Surface from prostep and Surface from Geom. As Surface is an abstract Surface this class is an access to the sub-class required |
| StepToGeom_MakeSurfaceOfLinearExtrusion | This class implements the mapping between class SurfaceOfLinearExtrusion from StepGeom which describes a surface_of_linear_extrusion from Prostep and SurfaceOfLinearExtrusion from Geom |
| StepToGeom_MakeSurfaceOfRevolution | This class implements the mapping between class SurfaceOfRevolution from StepGeom which describes a surface_of_revolution from Prostep and SurfaceOfRevolution from Geom |
| StepToGeom_MakeSweptSurface | This class implements the mapping between classes SweptSurface from StepGeom which describes a SweptSurface from prostep and SweptSurface from Geom. As SweptSurface is an abstract SweptSurface this class is an access to the sub-class required |
| StepToGeom_MakeToroidalSurface | This class implements the mapping between class ToroidalSurface from StepGeom which describes a toroidal_surface from Prostep and ToroidalSurface from Geom |
| StepToGeom_MakeTransformation2d | Convert cartesian_transformation_operator_2d to gp_Trsf2d |
| StepToGeom_MakeTransformation3d | Convert cartesian_transformation_operator_3d to gp_Trsf |
| StepToGeom_MakeTrimmedCurve | This class implements the mapping between classes class TrimmedCurve from StepGeom which describes a Trimmed Curve from prostep and TrimmedCurve from Geom |
| StepToGeom_MakeTrimmedCurve2d | This class implements the mapping between classes class TrimmedCurve from StepGeom which describes a Trimmed Curve from prostep and TrimmedCurve from Geom |
| StepToGeom_MakeVectorWithMagnitude | This class implements the mapping between classes Vector from StepGeom which describes a VectorWithMagnitude from Prostep and VectorWithMagnitude from Geom |
| StepToGeom_MakeVectorWithMagnitude2d | This class implements the mapping between classes Vector from StepGeom which describes a VectorWithMagnitude from Prostep and VectorWithMagnitude from Geom2d |
| StepToGeom_Root | This class implements the common services for all classes of StepToGeom which report error |
| StepToTopoDS | This package implements the mapping between AP214 Shape representation and CAS.CAD Shape Representation. The source schema is Part42 (which is included in AP214) |
| StepToTopoDS_Builder | |
| StepToTopoDS_CartesianPointHasher | |
| StepToTopoDS_DataMapIteratorOfDataMapOfRI | |
| StepToTopoDS_DataMapIteratorOfDataMapOfRINames | |
| StepToTopoDS_DataMapIteratorOfDataMapOfTRI | |
| StepToTopoDS_DataMapIteratorOfPointEdgeMap | |
| StepToTopoDS_DataMapIteratorOfPointVertexMap | |
| StepToTopoDS_DataMapNodeOfDataMapOfRI | |
| StepToTopoDS_DataMapNodeOfDataMapOfRINames | |
| StepToTopoDS_DataMapNodeOfDataMapOfTRI | |
| StepToTopoDS_DataMapNodeOfPointEdgeMap | |
| StepToTopoDS_DataMapNodeOfPointVertexMap | |
| StepToTopoDS_DataMapOfRI | |
| StepToTopoDS_DataMapOfRINames | |
| StepToTopoDS_DataMapOfTRI | |
| StepToTopoDS_GeometricTool | This class contains some algorithmic services specific to the mapping STEP to CAS.CADE |
| StepToTopoDS_MakeTransformed | Produces instances by Transformation of a basic item |
| StepToTopoDS_NMTool | Provides data to process non-manifold topology when reading from STEP |
| StepToTopoDS_PointEdgeMap | |
| StepToTopoDS_PointPair | Stores a pair of Points from step |
| StepToTopoDS_PointPairHasher | |
| StepToTopoDS_PointVertexMap | |
| StepToTopoDS_Root | This class implements the common services for all classes of StepToTopoDS which report error and sets and returns precision |
| StepToTopoDS_Tool | This Tool Class provides Information to build a Cas.Cad BRep from a ProSTEP Shape model |
| StepToTopoDS_TranslateCompositeCurve | Translate STEP entity composite_curve to TopoDS_Wire If surface is given, the curve is assumed to lie on that surface and in case if any segment of it is a curve_on_surface, the pcurve for that segment will be taken. Note: a segment of composite_curve may be itself composite_curve. Only one-level protection against cyclic references is implemented |
| StepToTopoDS_TranslateCurveBoundedSurface | Translate curve_bounded_surface into TopoDS_Face |
| StepToTopoDS_TranslateEdge | |
| StepToTopoDS_TranslateEdgeLoop | |
| StepToTopoDS_TranslateFace | |
| StepToTopoDS_TranslatePolyLoop | |
| StepToTopoDS_TranslateShell | |
| StepToTopoDS_TranslateVertex | |
| StepToTopoDS_TranslateVertexLoop | |
| StepVisual_AnnotationOccurrence | |
| StepVisual_AnnotationText | |
| StepVisual_AnnotationTextOccurrence | |
| StepVisual_AreaInSet | |
| StepVisual_AreaOrView | |
| StepVisual_Array1OfBoxCharacteristicSelect | |
| StepVisual_Array1OfCurveStyleFontPattern | |
| StepVisual_Array1OfDirectionCountSelect | |
| StepVisual_Array1OfFillStyleSelect | |
| StepVisual_Array1OfInvisibleItem | |
| StepVisual_Array1OfLayeredItem | |
| StepVisual_Array1OfPresentationStyleAssignment | |
| StepVisual_Array1OfPresentationStyleSelect | |
| StepVisual_Array1OfStyleContextSelect | |
| StepVisual_Array1OfSurfaceStyleElementSelect | |
| StepVisual_Array1OfTextOrCharacter | |
| StepVisual_BackgroundColour | |
| StepVisual_BoxCharacteristicSelect | |
| StepVisual_CameraImage | |
| StepVisual_CameraImage2dWithScale | |
| StepVisual_CameraImage3dWithScale | |
| StepVisual_CameraModel | |
| StepVisual_CameraModelD2 | |
| StepVisual_CameraModelD3 | |
| StepVisual_CameraUsage | |
| StepVisual_Colour | |
| StepVisual_ColourRgb | |
| StepVisual_ColourSpecification | |
| StepVisual_CompositeText | |
| StepVisual_CompositeTextWithExtent | |
| StepVisual_ContextDependentInvisibility | |
| StepVisual_ContextDependentOverRidingStyledItem | |
| StepVisual_CurveStyle | |
| StepVisual_CurveStyleFont | |
| StepVisual_CurveStyleFontPattern | |
| StepVisual_CurveStyleFontSelect | |
| StepVisual_DirectionCountSelect | |
| StepVisual_DraughtingAnnotationOccurrence | |
| StepVisual_DraughtingModel | Representation of STEP entity DraughtingModel |
| StepVisual_DraughtingPreDefinedColour | |
| StepVisual_DraughtingPreDefinedCurveFont | |
| StepVisual_ExternallyDefinedCurveFont | Representation of STEP entity ExternallyDefinedCurveFont |
| StepVisual_ExternallyDefinedTextFont | Representation of STEP entity ExternallyDefinedTextFont |
| StepVisual_FillAreaStyle | |
| StepVisual_FillAreaStyleColour | |
| StepVisual_FillStyleSelect | |
| StepVisual_FontSelect | |
| StepVisual_HArray1OfBoxCharacteristicSelect | |
| StepVisual_HArray1OfCurveStyleFontPattern | |
| StepVisual_HArray1OfDirectionCountSelect | |
| StepVisual_HArray1OfFillStyleSelect | |
| StepVisual_HArray1OfInvisibleItem | |
| StepVisual_HArray1OfLayeredItem | |
| StepVisual_HArray1OfPresentationStyleAssignment | |
| StepVisual_HArray1OfPresentationStyleSelect | |
| StepVisual_HArray1OfStyleContextSelect | |
| StepVisual_HArray1OfSurfaceStyleElementSelect | |
| StepVisual_HArray1OfTextOrCharacter | |
| StepVisual_Invisibility | |
| StepVisual_InvisibilityContext | |
| StepVisual_InvisibleItem | |
| StepVisual_LayeredItem | |
| StepVisual_MarkerMember | Defines MarkerType as unique member of MarkerSelect Works with an EnumTool |
| StepVisual_MarkerSelect | |
| StepVisual_MechanicalDesignGeometricPresentationArea | |
| StepVisual_MechanicalDesignGeometricPresentationRepresentation | |
| StepVisual_OverRidingStyledItem | |
| StepVisual_PlanarBox | |
| StepVisual_PlanarExtent | |
| StepVisual_PointStyle | |
| StepVisual_PreDefinedColour | |
| StepVisual_PreDefinedCurveFont | |
| StepVisual_PreDefinedItem | |
| StepVisual_PreDefinedTextFont | |
| StepVisual_PresentationArea | |
| StepVisual_PresentationLayerAssignment | |
| StepVisual_PresentationLayerUsage | Added from StepVisual Rev2 to Rev4 |
| StepVisual_PresentationRepresentation | |
| StepVisual_PresentationRepresentationSelect | |
| StepVisual_PresentationSet | |
| StepVisual_PresentationSize | |
| StepVisual_PresentationSizeAssignmentSelect | |
| StepVisual_PresentationStyleAssignment | |
| StepVisual_PresentationStyleByContext | |
| StepVisual_PresentationStyleSelect | |
| StepVisual_PresentationView | |
| StepVisual_PresentedItem | |
| StepVisual_PresentedItemRepresentation | Added from StepVisual Rev2 to Rev4 |
| StepVisual_StyleContextSelect | |
| StepVisual_StyledItem | |
| StepVisual_SurfaceSideStyle | |
| StepVisual_SurfaceStyleBoundary | |
| StepVisual_SurfaceStyleControlGrid | |
| StepVisual_SurfaceStyleElementSelect | |
| StepVisual_SurfaceStyleFillArea | |
| StepVisual_SurfaceStyleParameterLine | |
| StepVisual_SurfaceStyleSegmentationCurve | |
| StepVisual_SurfaceStyleSilhouette | |
| StepVisual_SurfaceStyleUsage | |
| StepVisual_Template | |
| StepVisual_TemplateInstance | |
| StepVisual_TextLiteral | |
| StepVisual_TextOrCharacter | |
| StepVisual_TextStyle | |
| StepVisual_TextStyleForDefinedFont | |
| StepVisual_TextStyleWithBoxCharacteristics | |
| StepVisual_ViewVolume | |
| StlAPI | Offers the API for STL data manipulation |
| StlAPI_Reader | Reading from stereolithography format |
| StlAPI_Writer | This class creates and writes STL files from Open CASCADE shapes. An STL file can be written to an existing STL file or to a new one. |
| StlMesh | Implements a basic mesh data-structure for the needs of the application fast prototyping |
| StlMesh_Mesh | Mesh definition. The mesh contains one or several domains. Each mesh domain contains a set of triangles. Each domain can have its own deflection value |
| StlMesh_MeshDomain | A mesh domain is a set of triangles defined with three geometric vertices and a given orientation. The mesh domain has its own deflection. Internal class used to classify the triangles of each domain |
| StlMesh_MeshExplorer | Provides facilities to explore the triangles of each mesh domain |
| StlMesh_MeshTriangle | A mesh triangle is defined with three geometric vertices and an orientation |
| StlMesh_SequenceNodeOfSequenceOfMesh | |
| StlMesh_SequenceNodeOfSequenceOfMeshDomain | |
| StlMesh_SequenceNodeOfSequenceOfMeshTriangle | |
| StlMesh_SequenceOfMesh | |
| StlMesh_SequenceOfMeshDomain | |
| StlMesh_SequenceOfMeshTriangle | |
| StlTransfer | The package Algorithm for Meshing implements facilities to retrieve the Mesh data-structure from a shape of package TopoDS. The triangulation should be computed before. The result is stored in the mesh data-structure Mesh from package StlMesh |
| Storage | Storage package is used to write and read persistent objects. These objects are read and written by a retrieval or storage algorithm (Storage_Schema object) in a container (disk, memory, network ...). Drivers (FSD_File objects) assign a physical container for data to be stored or retrieved. The standard procedure for an application in reading a container is the following: |
| Storage_ArrayOfCallBack | |
| Storage_ArrayOfSchema | |
| Storage_BaseDriver | Root class for drivers. A driver assigns a physical container to data to be stored or retrieved, for instance a file. The FSD package provides two derived concrete classes : |
| Storage_Bucket | |
| Storage_BucketIterator | |
| Storage_BucketOfPersistent | |
| Storage_CallBack | |
| Storage_Data | A picture memorizing the data stored in a container (for example, in a file). A Storage_Data object represents either: |
| Storage_DataMapIteratorOfMapOfCallBack | |
| Storage_DataMapIteratorOfMapOfPers | |
| Storage_DataMapNodeOfMapOfCallBack | |
| Storage_DataMapNodeOfMapOfPers | |
| Storage_DefaultCallBack | |
| Storage_HArrayOfCallBack | |
| Storage_HArrayOfSchema | |
| Storage_HeaderData | |
| Storage_HPArray | |
| Storage_HSeqOfRoot | |
| Storage_IndexedDataMapNodeOfPType | |
| Storage_InternalData | |
| Storage_MapOfCallBack | |
| Storage_MapOfPers | |
| Storage_PArray | |
| Storage_PType | |
| Storage_Root | A root object extracted from a Storage_Data object. A Storage_Root encapsulates a persistent object which is a root of a Storage_Data object. It contains additional information: the name and the data type of the persistent object. When retrieving a Storage_Data object from a container (for example, a file) you access its roots with the function Roots which returns a sequence of root objects. The provided functions allow you to request information about each root of the sequence. You do not create explicit roots: when inserting data in a Storage_Data object, you just provide the persistent object and optionally its name to the function AddRoot |
| Storage_RootData | |
| Storage_Schema | Root class for basic storage/retrieval algorithms. A Storage_Schema object processes: |
| Storage_SeqOfRoot | |
| Storage_SequenceNodeOfSeqOfRoot | |
| Storage_stCONSTclCOM | |
| Storage_TypeData | |
| Storage_TypedCallBack | |
| SWDRAW | Provides DRAW interface to the functionalities of Shape Healing toolkit (SHAPEWORKS Delivery Unit) |
| SWDRAW_ShapeAnalysis | Contains commands to activate package ShapeAnalysis List of DRAW commands and corresponding functionalities: tolerance - ShapeAnalysis_ShapeTolerance projcurve - ShapeAnalysis_Curve projface - ShapeAnalysis_Surface |
| SWDRAW_ShapeCustom | Contains commands to activate package ShapeCustom List of DRAW commands and corresponding functionalities: directfaces - ShapeCustom::DirectFaces scaleshape - ShapeCustom::ScaleShape |
| SWDRAW_ShapeExtend | Contains commands to activate package ShapeExtend List of DRAW commands and corresponding functionalities: sortcompound - ShapeExtend_Explorer::SortedCompound |
| SWDRAW_ShapeFix | Contains commands to activate package ShapeFix List of DRAW commands and corresponding functionalities: edgesameparam - ShapeFix::SameParameter settolerance - ShapeFix_ShapeTolerance stwire - ShapeFix_Wire reface - ShapeFix_Face repcurve - ShapeFix_PCurves |
| SWDRAW_ShapeProcess | Contains commands to activate package ShapeProcess |
| SWDRAW_ShapeProcessAPI | Contains commands to activate package ShapeProcessAPI |
| SWDRAW_ShapeTool | Defines functions to control shapes (in way useful for XSTEP), additional features which should be basic, or call tools which are bound with transfer needs. But these functions work on shapes, geometry, nothing else (no file, no model, no entity) |
| SWDRAW_ShapeUpgrade | Contains commands to activate package ShapeUpgrade List of DRAW commands and corresponding functionalities: DT_ShapeDivide - ShapeUpgrade_ShapeDivide DT_PlaneDividedFace - ShapeUpgrade_PlaneDividedFace DT_PlaneGridShell - ShapeUpgrade_PlaneGridShell DT_PlaneFaceCommon - ShapeUpgrade_PlaneFaceCommon DT_Split2dCurve - ShapeUpgrade_Split2dCurve DT_SplitCurve - ShapeUpgrade_SplitCurve DT_SplitSurface - ShapeUpgrade_SplitSurface DT_SupportModification - ShapeUpgrade_DataMapOfShapeSurface DT_Debug - ShapeUpgrade::SetDebug shellsolid - ShapeAnalysis_Shell/ShapeUpgrade_ShellSewing |
| Sweep_NumShape | Gives a simple indexed representation of a Directing Edge topology |
| Sweep_NumShapeIterator | This class provides iteration services required by the Swept Primitives for a Directing NumShape Line |
| Sweep_NumShapeTool | This class provides the indexation and type analysis services required by the NumShape Directing Shapes of Swept Primitives |
| TColGeom2d_Array1OfBezierCurve | |
| TColGeom2d_Array1OfBSplineCurve | |
| TColGeom2d_Array1OfCurve | |
| TColGeom2d_HArray1OfBezierCurve | |
| TColGeom2d_HArray1OfBSplineCurve | |
| TColGeom2d_HArray1OfCurve | |
| TColGeom2d_HSequenceOfBoundedCurve | |
| TColGeom2d_HSequenceOfCurve | |
| TColGeom2d_SequenceNodeOfSequenceOfBoundedCurve | |
| TColGeom2d_SequenceNodeOfSequenceOfCurve | |
| TColGeom2d_SequenceNodeOfSequenceOfGeometry | |
| TColGeom2d_SequenceOfBoundedCurve | |
| TColGeom2d_SequenceOfCurve | |
| TColGeom2d_SequenceOfGeometry | |
| TColGeom_Array1OfBezierCurve | |
| TColGeom_Array1OfBSplineCurve | |
| TColGeom_Array1OfCurve | |
| TColGeom_Array1OfSurface | |
| TColGeom_Array2OfBezierSurface | |
| TColGeom_Array2OfSurface | |
| TColGeom_HArray1OfBezierCurve | |
| TColGeom_HArray1OfBSplineCurve | |
| TColGeom_HArray1OfCurve | |
| TColGeom_HArray1OfSurface | |
| TColGeom_HArray2OfSurface | |
| TColGeom_HSequenceOfBoundedCurve | |
| TColGeom_HSequenceOfCurve | |
| TColGeom_SequenceNodeOfSequenceOfBoundedCurve | |
| TColGeom_SequenceNodeOfSequenceOfCurve | |
| TColGeom_SequenceNodeOfSequenceOfSurface | |
| TColGeom_SequenceOfBoundedCurve | |
| TColGeom_SequenceOfCurve | |
| TColGeom_SequenceOfSurface | |
| TColgp_Array1OfCirc2d | |
| TColgp_Array1OfDir | |
| TColgp_Array1OfDir2d | |
| TColgp_Array1OfLin2d | |
| TColgp_Array1OfPnt | |
| TColgp_Array1OfPnt2d | |
| TColgp_Array1OfVec | |
| TColgp_Array1OfVec2d | |
| TColgp_Array1OfXY | |
| TColgp_Array1OfXYZ | |
| TColgp_Array2OfCirc2d | |
| TColgp_Array2OfDir | |
| TColgp_Array2OfDir2d | |
| TColgp_Array2OfLin2d | |
| TColgp_Array2OfPnt | |
| TColgp_Array2OfPnt2d | |
| TColgp_Array2OfVec | |
| TColgp_Array2OfVec2d | |
| TColgp_Array2OfXY | |
| TColgp_Array2OfXYZ | |
| TColgp_HArray1OfCirc2d | |
| TColgp_HArray1OfDir | |
| TColgp_HArray1OfDir2d | |
| TColgp_HArray1OfLin2d | |
| TColgp_HArray1OfPnt | |
| TColgp_HArray1OfPnt2d | |
| TColgp_HArray1OfVec | |
| TColgp_HArray1OfVec2d | |
| TColgp_HArray1OfXY | |
| TColgp_HArray1OfXYZ | |
| TColgp_HArray2OfCirc2d | |
| TColgp_HArray2OfDir | |
| TColgp_HArray2OfDir2d | |
| TColgp_HArray2OfLin2d | |
| TColgp_HArray2OfPnt | |
| TColgp_HArray2OfPnt2d | |
| TColgp_HArray2OfVec | |
| TColgp_HArray2OfVec2d | |
| TColgp_HArray2OfXY | |
| TColgp_HArray2OfXYZ | |
| TColgp_HSequenceOfDir | |
| TColgp_HSequenceOfDir2d | |
| TColgp_HSequenceOfPnt | |
| TColgp_HSequenceOfPnt2d | |
| TColgp_HSequenceOfVec | |
| TColgp_HSequenceOfVec2d | |
| TColgp_HSequenceOfXY | |
| TColgp_HSequenceOfXYZ | |
| TColgp_SequenceNodeOfSequenceOfArray1OfPnt2d | |
| TColgp_SequenceNodeOfSequenceOfAx1 | |
| TColgp_SequenceNodeOfSequenceOfDir | |
| TColgp_SequenceNodeOfSequenceOfDir2d | |
| TColgp_SequenceNodeOfSequenceOfPnt | |
| TColgp_SequenceNodeOfSequenceOfPnt2d | |
| TColgp_SequenceNodeOfSequenceOfVec | |
| TColgp_SequenceNodeOfSequenceOfVec2d | |
| TColgp_SequenceNodeOfSequenceOfXY | |
| TColgp_SequenceNodeOfSequenceOfXYZ | |
| TColgp_SequenceOfArray1OfPnt2d | |
| TColgp_SequenceOfAx1 | |
| TColgp_SequenceOfDir | |
| TColgp_SequenceOfDir2d | |
| TColgp_SequenceOfPnt | |
| TColgp_SequenceOfPnt2d | |
| TColgp_SequenceOfVec | |
| TColgp_SequenceOfVec2d | |
| TColgp_SequenceOfXY | |
| TColgp_SequenceOfXYZ | |
| TCollection | The package <TCollection> provides the services for the transient basic data structures |
| TCollection_AsciiString | A variable-length sequence of ASCII characters (normal 8-bit character type). It provides editing operations with built-in memory management to make AsciiString objects easier to use than ordinary character arrays. AsciiString objects follow value semantics; in other words, they are the actual strings, not handles to strings, and are copied through assignment. You may use HAsciiString objects to get handles to strings |
| TCollection_BaseSequence | Definition of a base class for all instanciations of sequence |
| TCollection_BasicMap | Root class of all the maps, provides utilitites for managing the buckets. Maps are dynamically extended data structures where data is quickly accessed with a key. General properties of maps |
| TCollection_BasicMapIterator | This class provides basic services for the iterators on Maps. The iterators are inherited from this one |
| TCollection_CompareOfInteger | |
| TCollection_CompareOfReal | |
| TCollection_ExtendedString | A variable-length sequence of "extended" (UNICODE) characters (16-bit character type). It provides editing operations with built-in memory management to make ExtendedString objects easier to use than ordinary extended character arrays. ExtendedString objects follow "value semantics", that is, they are the actual strings, not handles to strings, and are copied through assignment. You may use HExtendedString objects to get handles to strings |
| TCollection_HAsciiString | A variable-length sequence of ASCII characters (normal 8-bit character type). It provides editing operations with built-in memory management to make HAsciiString objects easier to use than ordinary character arrays. HAsciiString objects are handles to strings |
| TCollection_HExtendedString | A variable-length sequence of "extended" (UNICODE) characters (16-bit character type). It provides editing operations with built-in memory management to make ExtendedString objects easier to use than ordinary extended character arrays. HExtendedString objects are handles to strings |
| TCollection_MapNode | Basic class root of all the Maps |
| TCollection_PrivCompareOfInteger | |
| TCollection_PrivCompareOfReal | |
| TCollection_SeqNode | |
| TColQuantity_Array1OfLength | |
| TColQuantity_Array2OfLength | |
| TColQuantity_HArray1OfLength | |
| TColQuantity_HArray2OfLength | |
| TColStd_Array1OfAsciiString | |
| TColStd_Array1OfBoolean | |
| TColStd_Array1OfByte | |
| TColStd_Array1OfCharacter | |
| TColStd_Array1OfExtendedString | |
| TColStd_Array1OfInteger | |
| TColStd_Array1OfListOfInteger | |
| TColStd_Array1OfReal | |
| TColStd_Array1OfTransient | |
| TColStd_Array2OfBoolean | |
| TColStd_Array2OfCharacter | |
| TColStd_Array2OfInteger | |
| TColStd_Array2OfReal | |
| TColStd_Array2OfTransient | |
| TColStd_DataMapIteratorOfDataMapOfAsciiStringInteger | |
| TColStd_DataMapIteratorOfDataMapOfIntegerInteger | |
| TColStd_DataMapIteratorOfDataMapOfIntegerListOfInteger | |
| TColStd_DataMapIteratorOfDataMapOfIntegerReal | |
| TColStd_DataMapIteratorOfDataMapOfIntegerTransient | |
| TColStd_DataMapIteratorOfDataMapOfStringInteger | |
| TColStd_DataMapIteratorOfDataMapOfTransientTransient | |
| TColStd_DataMapNodeOfDataMapOfAsciiStringInteger | |
| TColStd_DataMapNodeOfDataMapOfIntegerInteger | |
| TColStd_DataMapNodeOfDataMapOfIntegerListOfInteger | |
| TColStd_DataMapNodeOfDataMapOfIntegerReal | |
| TColStd_DataMapNodeOfDataMapOfIntegerTransient | |
| TColStd_DataMapNodeOfDataMapOfStringInteger | |
| TColStd_DataMapNodeOfDataMapOfTransientTransient | |
| TColStd_DataMapOfAsciiStringInteger | |
| TColStd_DataMapOfIntegerInteger | |
| TColStd_DataMapOfIntegerListOfInteger | |
| TColStd_DataMapOfIntegerReal | |
| TColStd_DataMapOfIntegerTransient | |
| TColStd_DataMapOfStringInteger | |
| TColStd_DataMapOfTransientTransient | |
| TColStd_HArray1OfAsciiString | |
| TColStd_HArray1OfBoolean | |
| TColStd_HArray1OfByte | |
| TColStd_HArray1OfCharacter | |
| TColStd_HArray1OfExtendedString | |
| TColStd_HArray1OfInteger | |
| TColStd_HArray1OfListOfInteger | |
| TColStd_HArray1OfReal | |
| TColStd_HArray1OfTransient | |
| TColStd_HArray2OfBoolean | |
| TColStd_HArray2OfCharacter | |
| TColStd_HArray2OfInteger | |
| TColStd_HArray2OfReal | |
| TColStd_HArray2OfTransient | |
| TColStd_HPackedMapOfInteger | Extension of TColStd_PackedMapOfInteger class to be manipulated by handle |
| TColStd_HSequenceOfAsciiString | |
| TColStd_HSequenceOfExtendedString | |
| TColStd_HSequenceOfHAsciiString | |
| TColStd_HSequenceOfHExtendedString | |
| TColStd_HSequenceOfInteger | |
| TColStd_HSequenceOfReal | |
| TColStd_HSequenceOfTransient | |
| TColStd_IndexedDataMapNodeOfIndexedDataMapOfTransientTransient | |
| TColStd_IndexedDataMapOfTransientTransient | |
| TColStd_IndexedMapNodeOfIndexedMapOfInteger | |
| TColStd_IndexedMapNodeOfIndexedMapOfReal | |
| TColStd_IndexedMapNodeOfIndexedMapOfTransient | |
| TColStd_IndexedMapOfInteger | |
| TColStd_IndexedMapOfReal | |
| TColStd_IndexedMapOfTransient | |
| TColStd_ListIteratorOfListOfAsciiString | |
| TColStd_ListIteratorOfListOfInteger | |
| TColStd_ListIteratorOfListOfReal | |
| TColStd_ListIteratorOfListOfTransient | |
| TColStd_ListNodeOfListOfAsciiString | |
| TColStd_ListNodeOfListOfInteger | |
| TColStd_ListNodeOfListOfReal | |
| TColStd_ListNodeOfListOfTransient | |
| TColStd_ListOfAsciiString | |
| TColStd_ListOfInteger | |
| TColStd_ListOfReal | |
| TColStd_ListOfTransient | |
| TColStd_MapIntegerHasher | |
| TColStd_MapIteratorOfMapOfAsciiString | |
| TColStd_MapIteratorOfMapOfInteger | |
| TColStd_MapIteratorOfMapOfReal | |
| TColStd_MapIteratorOfMapOfTransient | |
| TColStd_MapIteratorOfPackedMapOfInteger | |
| TColStd_MapOfAsciiString | |
| TColStd_MapOfInteger | |
| TColStd_MapOfReal | |
| TColStd_MapOfTransient | |
| TColStd_MapRealHasher | |
| TColStd_MapTransientHasher | |
| TColStd_PackedMapOfInteger | |
| TColStd_SequenceNodeOfSequenceOfAddress | |
| TColStd_SequenceNodeOfSequenceOfAsciiString | |
| TColStd_SequenceNodeOfSequenceOfBoolean | |
| TColStd_SequenceNodeOfSequenceOfExtendedString | |
| TColStd_SequenceNodeOfSequenceOfHAsciiString | |
| TColStd_SequenceNodeOfSequenceOfHExtendedString | |
| TColStd_SequenceNodeOfSequenceOfInteger | |
| TColStd_SequenceNodeOfSequenceOfReal | |
| TColStd_SequenceNodeOfSequenceOfTransient | |
| TColStd_SequenceOfAddress | |
| TColStd_SequenceOfAsciiString | |
| TColStd_SequenceOfBoolean | |
| TColStd_SequenceOfExtendedString | |
| TColStd_SequenceOfHAsciiString | |
| TColStd_SequenceOfHExtendedString | |
| TColStd_SequenceOfInteger | |
| TColStd_SequenceOfReal | |
| TColStd_SequenceOfTransient | |
| TColStd_StdMapNodeOfMapOfAsciiString | |
| TColStd_StdMapNodeOfMapOfInteger | |
| TColStd_StdMapNodeOfMapOfReal | |
| TColStd_StdMapNodeOfMapOfTransient | |
| TDataStd | This package defines standard attributes for modelling. These allow you to create and modify labels and attributes for many basic data types. Standard topological and visualization attributes have also been created. To find an attribute attached to a specific label, you use the GUID of the type of attribute you are looking for. To do this, first find this information using the method GetID as follows: Standard_GUID anID = MyAttributeClass::GetID(); Then, use the method Find for the label as follows: Standard_Boolean HasAttribute = aLabel.Find(anID,anAttribute); Note For information on the relations between this component of OCAF and the others, refer to the OCAF User's Guide |
| TDataStd_AsciiString | Used to define an AsciiString attribute containing a TCollection_AsciiString |
| TDataStd_BooleanArray | An array of boolean values |
| TDataStd_BooleanList | Contains a list of bolleans |
| TDataStd_ByteArray | An array of Byte (unsigned char) values |
| TDataStd_ChildNodeIterator | Iterates on the ChildStepren step of a step, at the first level only. It is possible to ask the iterator to explore all the sub step levels of the given one, with the option "allLevels" |
| TDataStd_Comment | Comment attribute. may be associated to any label to store user comment |
| TDataStd_Current | This attribute, located at root label, manage an access to a current label |
| TDataStd_DataMapIteratorOfDataMapOfStringByte | |
| TDataStd_DataMapIteratorOfDataMapOfStringHArray1OfInteger | |
| TDataStd_DataMapIteratorOfDataMapOfStringHArray1OfReal | |
| TDataStd_DataMapIteratorOfDataMapOfStringReal | |
| TDataStd_DataMapIteratorOfDataMapOfStringString | |
| TDataStd_DataMapNodeOfDataMapOfStringByte | |
| TDataStd_DataMapNodeOfDataMapOfStringHArray1OfInteger | |
| TDataStd_DataMapNodeOfDataMapOfStringHArray1OfReal | |
| TDataStd_DataMapNodeOfDataMapOfStringReal | |
| TDataStd_DataMapNodeOfDataMapOfStringString | |
| TDataStd_DataMapOfStringByte | |
| TDataStd_DataMapOfStringHArray1OfInteger | |
| TDataStd_DataMapOfStringHArray1OfReal | |
| TDataStd_DataMapOfStringReal | |
| TDataStd_DataMapOfStringString | |
| TDataStd_DeltaOnModificationOfByteArray | This class provides default services for an AttributeDelta on a MODIFICATION action |
| TDataStd_DeltaOnModificationOfExtStringArray | This class provides default services for an AttributeDelta on a MODIFICATION action |
| TDataStd_DeltaOnModificationOfIntArray | This class provides default services for an AttributeDelta on a MODIFICATION action |
| TDataStd_DeltaOnModificationOfIntPackedMap | This class provides default services for an AttributeDelta on a MODIFICATION action |
| TDataStd_DeltaOnModificationOfRealArray | This class provides default services for an AttributeDelta on a MODIFICATION action |
| TDataStd_Directory | Associates a directory in the data framework with a TDataStd_TagSource attribute. You can create a new directory label and add sub-directory or object labels to it, |
| TDataStd_Expression | <>Expression attribute. |
| TDataStd_ExtStringArray | ExtStringArray Attribute. Handles an array of UNICODE strings (represented by the TCollection_ExtendedString class) |
| TDataStd_ExtStringList | Contains a list of ExtendedString |
| TDataStd_HDataMapOfStringByte | Extension of TDataStd_DataMapOfStringByte class to be manipulated by handle |
| TDataStd_HDataMapOfStringHArray1OfInteger | Extension of TDataStd_DataMapOfStringHArray1OfInteger class to be manipulated by handle |
| TDataStd_HDataMapOfStringHArray1OfReal | Extension of TDataStd_DataMapOfStringHArray1OfReal class to be manipulated by handle |
| TDataStd_HDataMapOfStringInteger | Extension of TColStd_DataMapOfStringInteger class to be manipulated by handle |
| TDataStd_HDataMapOfStringReal | Extension of TDataStd_DataMapOfStringReal class to be manipulated by handle |
| TDataStd_HDataMapOfStringString | Extension of TDataStd_DataMapOfStringString class to be manipulated by handle |
| TDataStd_HLabelArray1 | |
| TDataStd_Integer | The basis to define an integer attribute |
| TDataStd_IntegerArray | Contains an array of integers |
| TDataStd_IntegerList | Contains a list of integers |
| TDataStd_IntPackedMap | Attribute for storing TColStd_PackedMapOfInteger |
| TDataStd_LabelArray1 | |
| TDataStd_ListIteratorOfListOfByte | |
| TDataStd_ListIteratorOfListOfExtendedString | |
| TDataStd_ListNodeOfListOfByte | |
| TDataStd_ListNodeOfListOfExtendedString | |
| TDataStd_ListOfByte | |
| TDataStd_ListOfExtendedString | |
| TDataStd_Name | Used to define a name attribute containing a string which specifies the name |
| TDataStd_NamedData | Contains a named data |
| TDataStd_NoteBook | NoteBook Object attribute |
| TDataStd_Real | The basis to define a real number attribute |
| TDataStd_RealArray | A framework for an attribute composed of a real number array |
| TDataStd_RealList | Contains a list of doubles |
| TDataStd_ReferenceArray | Contains an array of references to the labels |
| TDataStd_ReferenceList | Contains a list of references |
| TDataStd_Relation | <>Relation attribute. |
| TDataStd_Tick | Defines a boolean attribute. If it exists at a label - true, Otherwise - false |
| TDataStd_TreeNode | Allows you to define an explicit tree of labels which you can also edit. Without this class, the data structure cannot be fully edited. This service is required if for presentation purposes, you want to create an application with a tree which allows you to organize and link data as a function of application features |
| TDataStd_UAttribute | |
| TDataStd_Variable | <>Variable attribute. |
| TDataXtd | This package defines extension of standard attributes for modelling (mainly for work with geometry) |
| TDataXtd_Array1OfTrsf | |
| TDataXtd_Axis | The basis to define an axis attribute |
| TDataXtd_Constraint | The groundwork to define constraint attributes. The constraint attribute contains the following sorts of data: |
| TDataXtd_Geometry | This class is used to model construction geometry. The specific geometric construction of the attribute is defined by an element of the enumeration TDataXtd_GeometryEnum. This attribute may also be used to qualify underlying geometry of the associated NamedShape. for Constructuion element by example |
| TDataXtd_HArray1OfTrsf | |
| TDataXtd_Pattern | General pattern model |
| TDataXtd_PatternStd | To create a PatternStd (LinearPattern, CircularPattern, RectangularPattern, RadialCircularPattern, MirrorPattern) |
| TDataXtd_Placement | |
| TDataXtd_Plane | The basis to define a plane attribute. Warning: Use TDataXtd_Geometry attribute to retrieve the gp_Pln of the Plane attribute |
| TDataXtd_Point | The basis to define a point attribute. The topological attribute must contain a vertex. You use this class to create reference points in a design |
| TDataXtd_Position | Position of a Label |
| TDataXtd_Shape | A Shape is associated in the framework with : a NamedShape attribute |
| TDF | This package provides data framework for binding features and data structures |
| TDF_Attribute | A class each application has to implement. It is used to contain the application data. This abstract class, alongwith Label, is one of the cornerstones of Model Editor. The groundwork is to define the root of information. This information is to be attached to a Label, and could be of any of the following types: |
| TDF_AttributeArray1 | |
| TDF_AttributeDataMap | |
| TDF_AttributeDelta | This class discribes the services we need to implement Delta and Undo/Redo services |
| TDF_AttributeDeltaList | |
| TDF_AttributeDoubleMap | |
| TDF_AttributeIndexedMap | |
| TDF_AttributeIterator | |
| TDF_AttributeList | |
| TDF_AttributeMap | |
| TDF_AttributeSequence | |
| TDF_ChildIDIterator | Iterates on the children of a label, to find attributes having ID as Attribute ID |
| TDF_ChildIterator | Iterates on the children of a label, at the first level only. It is possible to ask the iterator to explore all the sub label levels of the given one, with the option "allLevels" |
| TDF_ClosureMode | This class provides options closure management |
| TDF_ClosureTool | This class provides services to build the closure of an information set. This class gives services around the transitive enclosure of a set of information, starting from a list of label. You can set closure options by using IDFilter (to select or exclude specific attribute IDs) and CopyOption objects and by giving to Closure method |
| TDF_ComparisonTool | This class provides services to compare sets of information. The use of this tool can works after a copy, acted by a CopyTool |
| TDF_CopyLabel | This class gives copy of source label hierarchy |
| TDF_CopyTool | This class provides services to build, copy or paste a set of information |
| TDF_Data | This class is used to manipulate a complete independant, self sufficient data structure and its services: |
| TDF_DataMapIteratorOfAttributeDataMap | |
| TDF_DataMapIteratorOfLabelDataMap | |
| TDF_DataMapIteratorOfLabelIntegerMap | |
| TDF_DataMapNodeOfAttributeDataMap | |
| TDF_DataMapNodeOfLabelDataMap | |
| TDF_DataMapNodeOfLabelIntegerMap | |
| TDF_DataSet | This class is a set of TDF informations like labels and attributes |
| TDF_DefaultDeltaOnModification | This class provides a default implementation of a TDF_DeltaOnModification |
| TDF_DefaultDeltaOnRemoval | This class provides a default implementation of a TDF_DeltaOnRemoval |
| TDF_Delta | A set of AttributeDelta for a given transaction number and reference time number. A delta set is available at <aSourceTime>. If applied, it restores the TDF_Data in the state it was at <aTargetTime> |
| TDF_DeltaList | |
| TDF_DeltaOnAddition | This class provides default services for an AttributeDelta on an ADDITION action |
| TDF_DeltaOnForget | This class provides default services for an AttributeDelta on an Forget action |
| TDF_DeltaOnModification | This class provides default services for an AttributeDelta on a MODIFICATION action |
| TDF_DeltaOnRemoval | This class provides default services for an AttributeDelta on a REMOVAL action |
| TDF_DeltaOnResume | This class provides default services for an AttributeDelta on an Resume action |
| TDF_DoubleMapIteratorOfAttributeDoubleMap | |
| TDF_DoubleMapIteratorOfGUIDProgIDMap | |
| TDF_DoubleMapIteratorOfLabelDoubleMap | |
| TDF_DoubleMapNodeOfAttributeDoubleMap | |
| TDF_DoubleMapNodeOfGUIDProgIDMap | |
| TDF_DoubleMapNodeOfLabelDoubleMap | |
| TDF_GUIDProgIDMap | |
| TDF_HAttributeArray1 | |
| TDF_IDFilter | This class offers filtering services around an ID list |
| TDF_IDList | |
| TDF_IDMap | |
| TDF_IndexedMapNodeOfAttributeIndexedMap | |
| TDF_IndexedMapNodeOfLabelIndexedMap | |
| TDF_Label | This class provides basic operations to define a label in a data structure. A label is a feature in the feature hierarchy. A label is always connected to a Data from TDF. To a label is attached attributes containing the software components information |
| TDF_LabelDataMap | |
| TDF_LabelDoubleMap | |
| TDF_LabelIndexedMap | |
| TDF_LabelIntegerMap | |
| TDF_LabelList | |
| TDF_LabelMap | |
| TDF_LabelMapHasher | A label hasher for label maps |
| TDF_LabelNode | |
| TDF_LabelSequence | |
| TDF_ListIteratorOfAttributeDeltaList | |
| TDF_ListIteratorOfAttributeList | |
| TDF_ListIteratorOfDeltaList | |
| TDF_ListIteratorOfIDList | |
| TDF_ListIteratorOfLabelList | |
| TDF_ListNodeOfAttributeDeltaList | |
| TDF_ListNodeOfAttributeList | |
| TDF_ListNodeOfDeltaList | |
| TDF_ListNodeOfIDList | |
| TDF_ListNodeOfLabelList | |
| TDF_MapIteratorOfAttributeMap | |
| TDF_MapIteratorOfIDMap | |
| TDF_MapIteratorOfLabelMap | |
| TDF_Reference | This attribute is used to store in the framework a reference to an other label |
| TDF_RelocationTable | This is a relocation dictionnary between source and target labels, attributes or any transient(useful for copy or paste actions). Note that one target value may be the relocation value of more than one source object |
| TDF_SequenceNodeOfAttributeSequence | |
| TDF_SequenceNodeOfLabelSequence | |
| TDF_StdMapNodeOfAttributeMap | |
| TDF_StdMapNodeOfIDMap | |
| TDF_StdMapNodeOfLabelMap | |
| TDF_TagSource | This attribute manage a tag provider to create child labels of a given one |
| TDF_Tool | This class provides general services for a data framework |
| TDF_Transaction | This class offers services to open, commit or abort a transaction in a more secure way than using Data from TDF. If you forget to close a transaction, it will be automaticaly aborted at the destruction of this object, at the closure of its scope |
| TDocStd | This package define CAF main classes |
| TDocStd_Application | The abstract root class for all application classes. They are in charge of: |
| TDocStd_ApplicationDelta | |
| TDocStd_CompoundDelta | A delta set is available at <aSourceTime>. If applied, it restores the TDF_Data in the state it was at <aTargetTime> |
| TDocStd_Context | |
| TDocStd_DataMapIteratorOfLabelIDMapDataMap | |
| TDocStd_DataMapNodeOfLabelIDMapDataMap | |
| TDocStd_Document | The contents of a TDocStd_Application, a document is a container for a data framework composed of labels and attributes. As such, TDocStd_Document is the entry point into the data framework. To gain access to the data, you create a document as follows: Handle(TDocStd_Document) MyDF = new TDocStd_Document The document also allows you to manage: |
| TDocStd_LabelIDMapDataMap | |
| TDocStd_Modified | Transient attribute wich register modified labels. This attribute is attached to root label |
| TDocStd_MultiTransactionManager | Class for synchronization of transactions within multiple documents. Each transaction of this class involvess one transaction in each modified document |
| TDocStd_Owner | This attribute located at the root label of the framework contains a back reference to the owner TDocStd_Document, providing acces to the document from any label. private class Owner; |
| TDocStd_PathParser | Parse an OS path |
| TDocStd_SequenceNodeOfSequenceOfApplicationDelta | |
| TDocStd_SequenceNodeOfSequenceOfDocument | |
| TDocStd_SequenceOfApplicationDelta | |
| TDocStd_SequenceOfDocument | |
| TDocStd_XLink | An attribute to store the path and the entry of external links. These refer from one data structure to a data structure in another document |
| TDocStd_XLinkIterator | Iterates on Reference attributes. This is an iterator giving all the external references of a Document |
| TDocStd_XLinkRoot | This attribute is the root of all external references contained in a Data from TDF. Only one instance of this class is added to the TDF_Data root label. Starting from this attribute all the Reference are linked together, to be found easely |
| TDocStd_XLinkTool | This tool class is used to copy the content of source label under target label. Only child labels and attributes of source are copied. attributes located out of source scope are not copied by this algorithm. Depending of the called method an external reference is set in the the target document to registred the externallink. Provide services to set, update and perform external references. Warning1: Nothing is provided in this class about the opportunity to copy, set a link or update it. Such decisions must be under application control. Warning2: If the document manages shapes, use after copy TNaming::ChangeShapes(target,M) to make copy of shapes |
| TEL_COLOUR | |
| TEL_POFFSET_PARAM | |
| TEL_POINT | |
| TEL_TEXTURE_COORD | |
| TEL_TRANSFORM_PERSISTENCE | |
| TestTopOpe | |
| TestTopOpe_BOOP | |
| TestTopOpe_HDSDisplayer | |
| TestTopOpeDraw | |
| TestTopOpeDraw_Array1OfDrawableMesure | |
| TestTopOpeDraw_Array1OfDrawableP3D | |
| TestTopOpeDraw_C2DDisplayer | |
| TestTopOpeDraw_C3DDisplayer | |
| TestTopOpeDraw_Displayer | |
| TestTopOpeDraw_DrawableC2D | |
| TestTopOpeDraw_DrawableC3D | |
| TestTopOpeDraw_DrawableMesure | |
| TestTopOpeDraw_DrawableP2D | |
| TestTopOpeDraw_DrawableP3D | |
| TestTopOpeDraw_DrawableSHA | |
| TestTopOpeDraw_DrawableSUR | |
| TestTopOpeDraw_HArray1OfDrawableMesure | |
| TestTopOpeDraw_HArray1OfDrawableP3D | |
| TestTopOpeDraw_ListIteratorOfListOfPnt2d | |
| TestTopOpeDraw_ListNodeOfListOfPnt2d | |
| TestTopOpeDraw_ListOfPnt2d | |
| TestTopOpeDraw_P2DDisplayer | |
| TestTopOpeDraw_P3DDisplayer | |
| TestTopOpeDraw_SurfaceDisplayer | |
| TestTopOpeDraw_TTOT | |
| TestTopOpeTools | Provide Trace control on packages involved in topological operations kernel, from Draw command interpretor |
| TestTopOpeTools_Array1OfMesure | |
| TestTopOpeTools_HArray1OfMesure | |
| TestTopOpeTools_Mesure | |
| TestTopOpeTools_Trace | |
| TFunction_Array1OfDataMapOfGUIDDriver | |
| TFunction_DataMapIteratorOfDataMapOfGUIDDriver | |
| TFunction_DataMapIteratorOfDataMapOfLabelListOfLabel | |
| TFunction_DataMapNodeOfDataMapOfGUIDDriver | |
| TFunction_DataMapNodeOfDataMapOfLabelListOfLabel | |
| TFunction_DataMapOfGUIDDriver | |
| TFunction_DataMapOfLabelListOfLabel | |
| TFunction_DoubleMapIteratorOfDoubleMapOfIntegerLabel | |
| TFunction_DoubleMapNodeOfDoubleMapOfIntegerLabel | |
| TFunction_DoubleMapOfIntegerLabel | |
| TFunction_Driver | This driver class provide services around function execution. One instance of this class is built for the whole session. The driver is bound to the DriverGUID in the DriverTable class. It allows you to create classes which inherit from this abstract class. These subclasses identify the various algorithms which can be applied to the data contained in the attributes of sub-labels of a model. A single instance of this class and each of its subclasses is built for the whole session |
| TFunction_DriverTable | A container for instances of drivers. You create a new instance of TFunction_Driver and use the method AddDriver to load it into the driver table |
| TFunction_Function | Provides the following two services |
| TFunction_GraphNode | Provides links between functions |
| TFunction_HArray1OfDataMapOfGUIDDriver | |
| TFunction_IFunction | Interface class for usage of Function Mechanism |
| TFunction_Iterator | Iterator of the graph of functions |
| TFunction_Logbook | This class contains information which is written and read during the solving process. Information is divided in three groups |
| TFunction_Scope | Keeps a scope of functions |
| Tmatrix3Struct | |
| TNaming | A topological attribute can be seen as a hook into the topological structure. To this hook, data can be attached and references defined. It is used for keeping and access to topological objects and their evolution. All topological objects are stored in the one user-protected TNaming_UsedShapes attribute at the root label of the data framework. This attribute contains map with all topological shapes, used in this document. To all other labels TNaming_NamedShape attribute can be added. This attribute contains references (hooks) to shapes from the TNaming_UsedShapes attribute and evolution of these shapes. TNaming_NamedShape attribute contains a set of pairs of hooks: old shape and new shape (see the figure below). It allows not only get the topological shapes by the labels, but also trace evolution of the shapes and correctly resolve dependent shapes by the changed one. If shape is just-created, then the old shape for accorded named shape is an empty shape. If a shape is deleted, then the new shape in this named shape is empty. Different algorithms may dispose sub-shapes of the result shape at the individual label depending on necessity: |
| TNaming_Builder | A tool to create and maintain topological attributes. Constructor creates an empty TNaming_NamedShape attribute at the given label. It allows adding "old shape" and "new shape" pairs with the specified evolution to this named shape. One evolution type per one builder must be used |
| TNaming_CopyShape | |
| TNaming_DataMapIteratorOfDataMapOfShapePtrRefShape | |
| TNaming_DataMapIteratorOfDataMapOfShapeShapesSet | |
| TNaming_DataMapNodeOfDataMapOfShapePtrRefShape | |
| TNaming_DataMapNodeOfDataMapOfShapeShapesSet | |
| TNaming_DataMapOfShapePtrRefShape | |
| TNaming_DataMapOfShapeShapesSet | |
| TNaming_DeltaOnModification | This class provides default services for an AttributeDelta on a MODIFICATION action |
| TNaming_DeltaOnRemoval | |
| TNaming_Identifier | |
| TNaming_Iterator | A tool to visit the contents of a named shape attribute. Pairs of shapes in the attribute are iterated, one being the pre-modification or the old shape, and the other the post-modification or the new shape. This allows you to have a full access to all contents of an attribute. If, on the other hand, you are only interested in topological entities stored in the attribute, you can use the functions GetShape and CurrentShape in TNaming_Tool |
| TNaming_IteratorOnShapesSet | |
| TNaming_ListIteratorOfListOfIndexedDataMapOfShapeListOfShape | |
| TNaming_ListIteratorOfListOfMapOfShape | |
| TNaming_ListIteratorOfListOfNamedShape | |
| TNaming_ListNodeOfListOfIndexedDataMapOfShapeListOfShape | |
| TNaming_ListNodeOfListOfMapOfShape | |
| TNaming_ListNodeOfListOfNamedShape | |
| TNaming_ListOfIndexedDataMapOfShapeListOfShape | |
| TNaming_ListOfMapOfShape | |
| TNaming_ListOfNamedShape | |
| TNaming_Localizer | |
| TNaming_MapIteratorOfMapOfNamedShape | |
| TNaming_MapOfNamedShape | |
| TNaming_Name | Store the arguments of Naming |
| TNaming_NamedShape | The basis to define an attribute for the storage of topology and naming data. This attribute contains two parts: |
| TNaming_NamedShapeHasher | |
| TNaming_Naming | This attribute store the topological naming of any selected shape, when this shape is not already attached to a specific label. This class is also used to solve it when the argumentsof the toipological naming are modified |
| TNaming_NamingTool | |
| TNaming_NewShapeIterator | Iterates on all the descendants of a shape |
| TNaming_OldShapeIterator | Iterates on all the ascendants of a shape |
| TNaming_RefShape | |
| TNaming_SameShapeIterator | To iterate on all the label which contained a given shape |
| TNaming_Scope | <>this class manage a scope of labels |
| TNaming_Selector | This class provides a single API for selection of shapes. This involves both identification and selection of shapes in the data framework. If the selected shape is modified, this selector will solve its identifications. This class is the user interface for topological naming resources |
| TNaming_ShapesSet | |
| TNaming_StdMapNodeOfMapOfNamedShape | |
| TNaming_Tool | A tool to get information on the topology of a named shape attribute. This information is typically a TopoDS_Shape object. Using this tool, relations between named shapes are also accessible |
| TNaming_TranslateTool | Tool to copy underlying TShape of a Shape. The TranslateTool class is provided to support the translation of topological data structures Transient to Transient |
| TNaming_Translator | Only for Shape Copy test - to move in DNaming |
| TNaming_UsedShapes | Global attribute located under root label to store all the shapes handled by the framework Set of Shapes Used in a Data from TDF Only one instance by Data, it always Stored as Attribute of The Root |
| TObj_Application | This is a base class for OCAF based TObj models with declared virtual methods |
| TObj_Assistant | This class provides interface to the static data to be used during save or load models |
| TObj_CheckModel | |
| TObj_HiddenPartition | |
| TObj_LabelIterator | |
| TObj_Model | |
| TObj_ModelIterator | |
| TObj_Object | Basis class for transient objects in OCAF-based models |
| TObj_ObjectIterator | |
| TObj_OcafObjectIterator | |
| TObj_Partition | |
| TObj_Persistence | |
| TObj_ReferenceIterator | |
| TObj_SequenceIterator | |
| TObj_TIntSparseArray | |
| TObj_TModel | |
| TObj_TNameContainer | |
| TObj_TObject | |
| TObj_TReference | |
| TObj_TXYZ | |
| TObjDRAW | Provides DRAW commands for work with TObj data structures |
| TopAbs | |
| TopBas_ListIteratorOfListOfTestInterference | |
| TopBas_ListNodeOfListOfTestInterference | |
| TopBas_ListOfTestInterference | |
| TopBas_TestInterference | |
| TopClass_Intersection3d | Template class for the intersection algorithm required by the 3D classifications |
| TopClass_SolidExplorer | Provide an exploration of a BRep Shape for the classification. Defines the description of a solid for the SolidClassifier |
| TopCnx_EdgeFaceTransition | TheEdgeFaceTransition is an algorithm to compute the cumulated transition for interferences on an edge |
| TopExp | This package provides basic tools to explore the topological data structures |
| TopExp_Explorer | An Explorer is a Tool to visit a Topological Data Structure form the TopoDS package |
| TopLoc_Datum3D | Describes a coordinate transformation, i.e. a change to an elementary 3D coordinate system, or position in 3D space. A Datum3D is always described relative to the default datum. The default datum is described relative to itself: its origin is (0,0,0), and its axes are (1,0,0) (0,1,0) (0,0,1) |
| TopLoc_IndexedMapNodeOfIndexedMapOfLocation | |
| TopLoc_IndexedMapOfLocation | |
| TopLoc_ItemLocation | An ItemLocation is an elementary coordinate system in a Location |
| TopLoc_Location | A Location is a composite transition. It comprises a series of elementary reference coordinates, i.e. objects of type TopLoc_Datum3D, and the powers to which these objects are raised |
| TopLoc_MapIteratorOfMapOfLocation | |
| TopLoc_MapLocationHasher | |
| TopLoc_MapOfLocation | |
| TopLoc_SListNodeOfItemLocation | |
| TopLoc_SListOfItemLocation | An SListOfItemLocation is a LISP like list of Items. An SListOfItemLocation is : . Empty. . Or it has a Value and a Tail which is an other SListOfItemLocation |
| TopLoc_StdMapNodeOfMapOfLocation | |
| TopoDS | Provides methods to cast objects of class TopoDS_Shape to be onjects of more specialized sub-classes. Types are verified, thus in the example below, the first two blocks are correct but the third is rejected by the compiler |
| TopoDS_Builder | A Builder is used to create Topological Data Structures.It is the root of the Builder class hierarchy |
| TopoDS_Compound | Describes a compound which |
| TopoDS_CompSolid | Describes a composite solid which |
| TopoDS_Edge | Describes an edge which |
| TopoDS_Face | Describes a face which |
| TopoDS_HShape | Class to manipulate a Shape with handle |
| TopoDS_Iterator | Iterates on the underlying shape underlying a given TopoDS_Shape object, providing access to its component sub-shapes. Each component shape is returned as a TopoDS_Shape with an orientation, and a compound of the original values and the relative values |
| TopoDS_ListIteratorOfListOfShape | |
| TopoDS_ListNodeOfListOfShape | |
| TopoDS_ListOfShape | |
| TopoDS_Shape | Describes a shape which |
| TopoDS_Shell | Describes a shell which |
| TopoDS_Solid | Describes a solid shape which |
| TopoDS_TCompound | A TCompound is an all-purpose set of Shapes |
| TopoDS_TCompSolid | A set of solids connected by their faces |
| TopoDS_TEdge | A topological part of a curve in 2D or 3D, the boundary is a set of oriented Vertices |
| TopoDS_TFace | A topological part of a surface or of the 2D space. The boundary is a set of wires and vertices |
| TopoDS_TShape | A TShape is a topological structure describing a set of points in a 2D or 3D space |
| TopoDS_TShell | A set of faces connected by their edges |
| TopoDS_TSolid | A Topological part of 3D space, bounded by shells, edges and vertices |
| TopoDS_TVertex | A Vertex is a topological point in two or three dimensions |
| TopoDS_TWire | A set of edges connected by their vertices |
| TopoDS_Vertex | Describes a vertex which |
| TopoDS_Wire | Describes a wire which |
| TopoDSToStep | This package implements the mapping between CAS.CAD Shape representation and AP214 Shape Representation. The target schema is pms_c4 (a subset of AP214) |
| TopoDSToStep_Builder | This builder Class provides services to build a ProSTEP Shape model from a Cas.Cad BRep |
| TopoDSToStep_FacetedTool | This Tool Class provides Information about Faceted Shapes to be mapped to STEP |
| TopoDSToStep_MakeBrepWithVoids | This class implements the mapping between classes Solid from TopoDS and BrepWithVoids from StepShape. All the topology and geometry comprised into the shell or the solid are taken into account and translated |
| TopoDSToStep_MakeFacetedBrep | This class implements the mapping between classes Shell or Solid from TopoDS and FacetedBrep from StepShape. All the topology and geometry comprised into the shell or the solid are taken into account and translated |
| TopoDSToStep_MakeFacetedBrepAndBrepWithVoids | This class implements the mapping between classes Solid from TopoDS and FacetedBrepAndBrepWithVoids from StepShape. All the topology and geometry comprised into the shell or the solid are taken into account and translated |
| TopoDSToStep_MakeGeometricCurveSet | This class implements the mapping between a Shape from TopoDS and a GeometricCurveSet from StepShape in order to create a GeometricallyBoundedWireframeRepresentation |
| TopoDSToStep_MakeManifoldSolidBrep | This class implements the mapping between classes Shell or Solid from TopoDS and ManifoldSolidBrep from StepShape. All the topology and geometry comprised into the shell or the solid are taken into account and translated |
| TopoDSToStep_MakeShellBasedSurfaceModel | This class implements the mapping between classes Face, Shell or Solid from TopoDS and ShellBasedSurfaceModel from StepShape. All the topology and geometry comprised into the shape are taken into account and translated |
| TopoDSToStep_MakeStepEdge | This class implements the mapping between classes Edge from TopoDS and TopologicalRepresentationItem from StepShape |
| TopoDSToStep_MakeStepFace | This class implements the mapping between classes Face from TopoDS and TopologicalRepresentationItem from StepShape |
| TopoDSToStep_MakeStepVertex | This class implements the mapping between classes Vertex from TopoDS and TopologicalRepresentationItem from StepShape |
| TopoDSToStep_MakeStepWire | This class implements the mapping between classes Wire from TopoDS and TopologicalRepresentationItem from StepShape |
| TopoDSToStep_Root | This class implements the common services for all classes of TopoDSToStep which report error |
| TopoDSToStep_Tool | This Tool Class provides Information to build a ProSTEP Shape model from a Cas.Cad BRep |
| TopoDSToStep_WireframeBuilder | This builder Class provides services to build a ProSTEP Wireframemodel from a Cas.Cad BRep |
| TopOpeBRep | This package provides the topological operations on the BRep data structure |
| TopOpeBRep_Array1OfLineInter | |
| TopOpeBRep_Array1OfVPointInter | |
| TopOpeBRep_Bipoint | |
| TopOpeBRep_DataMapIteratorOfDataMapOfTopolTool | |
| TopOpeBRep_DataMapNodeOfDataMapOfTopolTool | |
| TopOpeBRep_DataMapOfTopolTool | |
| TopOpeBRep_DSFiller | Provides class methods to fill a datastructure with results of intersections |
| TopOpeBRep_EdgesFiller | Fills a TopOpeBRepDS_DataStructure with Edge/Edge instersection data described by TopOpeBRep_EdgesIntersector |
| TopOpeBRep_EdgesIntersector | Describes the intersection of two edges on the same surface |
| TopOpeBRep_FaceEdgeFiller | |
| TopOpeBRep_FaceEdgeIntersector | Describes the intersection of a face and an edge |
| TopOpeBRep_FacesFiller | Fills a DataStructure from TopOpeBRepDS with the result of Face/Face instersection described by FacesIntersector from TopOpeBRep. if the faces have same Domain, record it in the DS. else record lines and points and attach list of interferences to the faces, the lines and the edges |
| TopOpeBRep_FacesIntersector | Describes the intersection of two faces |
| TopOpeBRep_FFDumper | |
| TopOpeBRep_FFTransitionTool | |
| TopOpeBRep_GeomTool | Provide services needed by the DSFiller |
| TopOpeBRep_HArray1OfLineInter | |
| TopOpeBRep_HArray1OfVPointInter | |
| TopOpeBRep_Hctxee2d | |
| TopOpeBRep_Hctxff2d | |
| TopOpeBRep_LineInter | |
| TopOpeBRep_ListIteratorOfListOfBipoint | |
| TopOpeBRep_ListNodeOfListOfBipoint | |
| TopOpeBRep_ListOfBipoint | |
| TopOpeBRep_Point2d | |
| TopOpeBRep_PointClassifier | |
| TopOpeBRep_PointGeomTool | Provide services needed by the Fillers |
| TopOpeBRep_SequenceNodeOfSequenceOfPoint2d | |
| TopOpeBRep_SequenceOfPoint2d | |
| TopOpeBRep_ShapeIntersector | Intersect two shapes |
| TopOpeBRep_ShapeIntersector2d | Intersect two shapes |
| TopOpeBRep_ShapeScanner | Find, among the subshapes SS of a reference shape RS, the ones which 3D box interfers with the box of a shape S (SS and S are of the same type) |
| TopOpeBRep_VPointInter | |
| TopOpeBRep_VPointInterClassifier | |
| TopOpeBRep_VPointInterIterator | |
| TopOpeBRep_WPointInter | |
| TopOpeBRep_WPointInterIterator | |
| TopOpeBRepBuild_Area1dBuilder | |
| TopOpeBRepBuild_Area2dBuilder | The Area2dBuilder algorithm is used to construct Faces from a LoopSet, where the Loop is the composite topological object of the boundary, here wire or block of edges. The LoopSet gives an iteration on Loops. For each Loop it indicates if it is on the boundary (wire) or if it results from an interference (block of edges). The result of the Area2dBuilder is an iteration on areas. An area is described by a set of Loops |
| TopOpeBRepBuild_Area3dBuilder | The Area3dBuilder algorithm is used to construct Solids from a LoopSet, where the Loop is the composite topological object of the boundary, here wire or block of edges. The LoopSet gives an iteration on Loops. For each Loop it indicates if it is on the boundary (wire) or if it results from an interference (block of edges). The result of the Area3dBuilder is an iteration on areas. An area is described by a set of Loops |
| TopOpeBRepBuild_AreaBuilder | The AreaBuilder algorithm is used to reconstruct complex topological objects as Faces or Solids |
| TopOpeBRepBuild_BlockBuilder | |
| TopOpeBRepBuild_BlockIterator | Iterator on the elements of a block |
| TopOpeBRepBuild_Builder | The Builder algorithm constructs topological objects from an existing topology and new geometries attached to the topology. It is used to construct the result of a topological operation; the existing topologies are the parts involved in the topological operation and the new geometries are the intersection lines and points |
| TopOpeBRepBuild_Builder1 | Extension of the class TopOpeBRepBuild_Builder dedicated to avoid bugs in "Rebuilding Result" algorithm for the case of SOLID/SOLID Boolean Operations |
| TopOpeBRepBuild_BuilderON | |
| TopOpeBRepBuild_CompositeClassifier | Classify composite Loops, i.e, loops that can be either a Shape, or a block of Elements |
| TopOpeBRepBuild_CorrectFace2d | |
| TopOpeBRepBuild_DataMapIteratorOfDataMapOfShapeListOfShapeListOfShape | |
| TopOpeBRepBuild_DataMapNodeOfDataMapOfShapeListOfShapeListOfShape | |
| TopOpeBRepBuild_DataMapOfShapeListOfShapeListOfShape | |
| TopOpeBRepBuild_EdgeBuilder | |
| TopOpeBRepBuild_FaceAreaBuilder | The FaceAreaBuilder algorithm is used to construct Faces from a LoopSet, where the Loop is the composite topological object of the boundary, here wire or block of edges. The LoopSet gives an iteration on Loops. For each Loop it indicates if it is on the boundary (wire) or if it results from an interference (block of edges). The result of the FaceAreaBuilder is an iteration on areas. An area is described by a set of Loops |
| TopOpeBRepBuild_FaceBuilder | |
| TopOpeBRepBuild_FuseFace | |
| TopOpeBRepBuild_GIter | |
| TopOpeBRepBuild_GTool | |
| TopOpeBRepBuild_GTopo | |
| TopOpeBRepBuild_HBuilder | The HBuilder algorithm constructs topological objects from an existing topology and new geometries attached to the topology. It is used to construct the result of a topological operation; the existing topologies are the parts involved in the topological operation and the new geometries are the intersection lines and points |
| TopOpeBRepBuild_IndexedDataMapNodeOfIndexedDataMapOfShapeVertexInfo | |
| TopOpeBRepBuild_IndexedDataMapOfShapeVertexInfo | |
| TopOpeBRepBuild_ListIteratorOfListOfListOfLoop | |
| TopOpeBRepBuild_ListIteratorOfListOfLoop | |
| TopOpeBRepBuild_ListIteratorOfListOfPave | |
| TopOpeBRepBuild_ListIteratorOfListOfShapeListOfShape | |
| TopOpeBRepBuild_ListNodeOfListOfListOfLoop | |
| TopOpeBRepBuild_ListNodeOfListOfLoop | |
| TopOpeBRepBuild_ListNodeOfListOfPave | |
| TopOpeBRepBuild_ListNodeOfListOfShapeListOfShape | |
| TopOpeBRepBuild_ListOfListOfLoop | |
| TopOpeBRepBuild_ListOfLoop | |
| TopOpeBRepBuild_ListOfPave | |
| TopOpeBRepBuild_ListOfShapeListOfShape | |
| TopOpeBRepBuild_Loop | Loop is an existing shape (Shell,Wire) or a set of shapes (Faces,Edges) which are connex. a set of connex shape is represented by a BlockIterator |
| TopOpeBRepBuild_LoopClassifier | Classify loops in order to build Areas |
| TopOpeBRepBuild_LoopSet | |
| TopOpeBRepBuild_Pave | |
| TopOpeBRepBuild_PaveClassifier | This class compares vertices on an edge |
| TopOpeBRepBuild_PaveSet | Class providing an exploration of a set of vertices to build edges. It is similar to LoopSet from TopOpeBRepBuild where Loop is Pave |
| TopOpeBRepBuild_ShapeListOfShape | Represent shape + a list of shape |
| TopOpeBRepBuild_ShapeSet | Auxiliary class providing an exploration of a set of shapes to build faces or solids. To build faces : shapes are wires, elements are edges. To build solids : shapes are shells, elements are faces. The ShapeSet stores a list of shapes, a list of elements to start reconstructions, and a map to search neighbours. The map stores the connection between elements through subshapes of type <SubShapeType> given in constructor. <SubShapeType> is : |
| TopOpeBRepBuild_ShellFaceClassifier | Classify faces and shells. shapes are Shells, Elements are Faces |
| TopOpeBRepBuild_ShellFaceSet | Bound is a shell, a boundelement is a face. The ShapeSet stores : |
| TopOpeBRepBuild_ShellToSolid | This class builds solids from a set of shells SSh and a solid F |
| TopOpeBRepBuild_SolidAreaBuilder | The SolidAreaBuilder algorithm is used to construct Solids from a LoopSet, where the Loop is the composite topological object of the boundary, here wire or block of edges. The LoopSet gives an iteration on Loops. For each Loop it indicates if it is on the boundary (wire) or if it results from an interference (block of edges). The result of the SolidAreaBuilder is an iteration on areas. An area is described by a set of Loops |
| TopOpeBRepBuild_SolidBuilder | |
| TopOpeBRepBuild_Tools | Auxiliary methods used in TopOpeBRepBuild_Builder1 class |
| TopOpeBRepBuild_Tools2d | |
| TopOpeBRepBuild_VertexInfo | |
| TopOpeBRepBuild_WireEdgeClassifier | Classify edges and wires. shapes are Wires, Element are Edge |
| TopOpeBRepBuild_WireEdgeSet | Bound is a wire, a boundelement is an edge. The ShapeSet stores : |
| TopOpeBRepBuild_WireToFace | This class builds faces from a set of wires SW and a face F. The face must have and underlying surface, say S. All of the edges of all of the wires must have a 2d representation on surface S (except if S is planar) |
| TopOpeBRepDS | This package provides services used by the TopOpeBRepBuild package performing topological operations on the BRep data structure |
| TopOpeBRepDS_Array1OfDataMapOfIntegerListOfInterference | |
| TopOpeBRepDS_Association | |
| TopOpeBRepDS_BuildTool | Provides a Tool to build topologies. Used to instantiate the Builder algorithm |
| TopOpeBRepDS_Check | Tool verifing integrity and structure of DS |
| TopOpeBRepDS_Curve | A Geom curve and a tolerance |
| TopOpeBRepDS_CurveData | |
| TopOpeBRepDS_CurveExplorer | |
| TopOpeBRepDS_CurveIterator | |
| TopOpeBRepDS_CurvePointInterference | An interference with a parameter |
| TopOpeBRepDS_DataMapIteratorOfDataMapOfCheckStatus | |
| TopOpeBRepDS_DataMapIteratorOfDataMapOfIntegerListOfInterference | |
| TopOpeBRepDS_DataMapIteratorOfDataMapOfInterferenceListOfInterference | |
| TopOpeBRepDS_DataMapIteratorOfDataMapOfInterferenceShape | |
| TopOpeBRepDS_DataMapIteratorOfDataMapOfShapeListOfShapeOn1State | |
| TopOpeBRepDS_DataMapIteratorOfDataMapOfShapeState | |
| TopOpeBRepDS_DataMapIteratorOfMapOfCurve | |
| TopOpeBRepDS_DataMapIteratorOfMapOfIntegerShapeData | |
| TopOpeBRepDS_DataMapIteratorOfMapOfPoint | |
| TopOpeBRepDS_DataMapIteratorOfMapOfSurface | |
| TopOpeBRepDS_DataMapIteratorOfShapeSurface | |
| TopOpeBRepDS_DataMapNodeOfDataMapOfCheckStatus | |
| TopOpeBRepDS_DataMapNodeOfDataMapOfIntegerListOfInterference | |
| TopOpeBRepDS_DataMapNodeOfDataMapOfInterferenceListOfInterference | |
| TopOpeBRepDS_DataMapNodeOfDataMapOfInterferenceShape | |
| TopOpeBRepDS_DataMapNodeOfDataMapOfShapeListOfShapeOn1State | |
| TopOpeBRepDS_DataMapNodeOfDataMapOfShapeState | |
| TopOpeBRepDS_DataMapNodeOfMapOfCurve | |
| TopOpeBRepDS_DataMapNodeOfMapOfIntegerShapeData | |
| TopOpeBRepDS_DataMapNodeOfMapOfPoint | |
| TopOpeBRepDS_DataMapNodeOfMapOfSurface | |
| TopOpeBRepDS_DataMapNodeOfShapeSurface | |
| TopOpeBRepDS_DataMapOfCheckStatus | |
| TopOpeBRepDS_DataMapOfIntegerListOfInterference | |
| TopOpeBRepDS_DataMapOfInterferenceListOfInterference | |
| TopOpeBRepDS_DataMapOfInterferenceShape | |
| TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State | |
| TopOpeBRepDS_DataMapOfShapeState | |
| TopOpeBRepDS_DataStructure | The DataStructure stores : |
| TopOpeBRepDS_DoubleMapIteratorOfDoubleMapOfIntegerShape | |
| TopOpeBRepDS_DoubleMapNodeOfDoubleMapOfIntegerShape | |
| TopOpeBRepDS_DoubleMapOfIntegerShape | |
| TopOpeBRepDS_DSS | |
| TopOpeBRepDS_Dumper | |
| TopOpeBRepDS_Edge3dInterferenceTool | Tool computing edge / face complex transition, Interferences of edge reference are given by I = (T on face, G = point or vertex, S = edge) |
| TopOpeBRepDS_EdgeInterferenceTool | Tool computing complex transition on Edge |
| TopOpeBRepDS_EdgeVertexInterference | An interference with a parameter (ShapeShapeInterference) |
| TopOpeBRepDS_EIR | EdgeInterferenceReducer |
| TopOpeBRepDS_Explorer | |
| TopOpeBRepDS_FaceEdgeInterference | ShapeShapeInterference |
| TopOpeBRepDS_FaceInterferenceTool | Tool computing complex transition on Face |
| TopOpeBRepDS_Filter | |
| TopOpeBRepDS_FIR | FaceInterferenceReducer |
| TopOpeBRepDS_GapFiller | |
| TopOpeBRepDS_GapTool | |
| TopOpeBRepDS_GeometryData | Mother-class of SurfaceData, CurveData, PointData |
| TopOpeBRepDS_HArray1OfDataMapOfIntegerListOfInterference | |
| TopOpeBRepDS_HDataStructure | |
| TopOpeBRepDS_IndexedDataMapNodeOfIndexedDataMapOfShapeWithState | |
| TopOpeBRepDS_IndexedDataMapNodeOfIndexedDataMapOfVertexPoint | |
| TopOpeBRepDS_IndexedDataMapNodeOfMapOfShapeData | |
| TopOpeBRepDS_IndexedDataMapOfShapeWithState | |
| TopOpeBRepDS_IndexedDataMapOfVertexPoint | |
| TopOpeBRepDS_Interference | An interference is the description of the attachment of a new geometry on a geometry. For example an intersection point on an Edge or on a Curve |
| TopOpeBRepDS_InterferenceIterator | Iterate on interferences of a list, matching conditions on interferences. Nota : inheritance of ListIteratorOfListOfInterference from TopOpeBRepDS has not been done because of the impossibility of naming the classical More, Next methods which are declared as static in TCollection_ListIteratorOfList ... . ListIteratorOfList has benn placed as a field of InterferenceIterator |
| TopOpeBRepDS_InterferenceTool | |
| TopOpeBRepDS_ListIteratorOfListOfInterference | |
| TopOpeBRepDS_ListNodeOfListOfInterference | |
| TopOpeBRepDS_ListOfInterference | |
| TopOpeBRepDS_ListOfShapeOn1State | Represent a list of shape |
| TopOpeBRepDS_MapOfCurve | |
| TopOpeBRepDS_MapOfIntegerShapeData | |
| TopOpeBRepDS_MapOfPoint | |
| TopOpeBRepDS_MapOfShapeData | |
| TopOpeBRepDS_MapOfSurface | |
| TopOpeBRepDS_Marker | |
| TopOpeBRepDS_Point | A Geom point and a tolerance |
| TopOpeBRepDS_PointData | |
| TopOpeBRepDS_PointExplorer | |
| TopOpeBRepDS_PointIterator | |
| TopOpeBRepDS_Reducer | Reduce interferences of a data structure (HDS) used in topological operations |
| TopOpeBRepDS_ShapeData | |
| TopOpeBRepDS_ShapeShapeInterference | Interference |
| TopOpeBRepDS_ShapeSurface | |
| TopOpeBRepDS_ShapeWithState | |
| TopOpeBRepDS_SolidSurfaceInterference | Interference |
| TopOpeBRepDS_Surface | A Geom surface and a tolerance |
| TopOpeBRepDS_SurfaceCurveInterference | Interference with a 2d curve |
| TopOpeBRepDS_SurfaceData | |
| TopOpeBRepDS_SurfaceExplorer | |
| TopOpeBRepDS_SurfaceIterator | |
| TopOpeBRepDS_TKI | |
| TopOpeBRepDS_TOOL | |
| TopOpeBRepDS_Transition | |
| TopOpeBRepTool | This package provides services used by the TopOpeBRep package performing topological operations on the BRep data structure |
| TopOpeBRepTool_AncestorsTool | Describes the ancestors tool needed by the class DSFiller from TopOpeInter |
| TopOpeBRepTool_BoxSort | |
| TopOpeBRepTool_C2DF | |
| TopOpeBRepTool_CLASSI | |
| TopOpeBRepTool_connexity | |
| TopOpeBRepTool_CORRISO | Fref is built on x-periodic surface (x=u,v). S built on Fref's geometry, should be UVClosed |
| TopOpeBRepTool_CurveTool | |
| TopOpeBRepTool_DataMapIteratorOfDataMapOfOrientedShapeC2DF | |
| TopOpeBRepTool_DataMapIteratorOfDataMapOfShapeface | |
| TopOpeBRepTool_DataMapIteratorOfDataMapOfShapeListOfC2DF | |
| TopOpeBRepTool_DataMapNodeOfDataMapOfOrientedShapeC2DF | |
| TopOpeBRepTool_DataMapNodeOfDataMapOfShapeface | |
| TopOpeBRepTool_DataMapNodeOfDataMapOfShapeListOfC2DF | |
| TopOpeBRepTool_DataMapOfOrientedShapeC2DF | |
| TopOpeBRepTool_DataMapOfShapeface | |
| TopOpeBRepTool_DataMapOfShapeListOfC2DF | |
| TopOpeBRepTool_face | |
| TopOpeBRepTool_FuseEdges | This class can detect vertices in a face that can be considered useless and then perform the fuse of the edges and remove the useless vertices. By useles vertices, we mean : |
| TopOpeBRepTool_GeomTool | |
| TopOpeBRepTool_HBoxTool | |
| TopOpeBRepTool_IndexedDataMapNodeOfIndexedDataMapOfShapeBox | |
| TopOpeBRepTool_IndexedDataMapNodeOfIndexedDataMapOfShapeBox2d | |
| TopOpeBRepTool_IndexedDataMapNodeOfIndexedDataMapOfShapeconnexity | |
| TopOpeBRepTool_IndexedDataMapNodeOfIndexedDataMapOfSolidClassifier | |
| TopOpeBRepTool_IndexedDataMapOfShapeBox | |
| TopOpeBRepTool_IndexedDataMapOfShapeBox2d | |
| TopOpeBRepTool_IndexedDataMapOfShapeconnexity | |
| TopOpeBRepTool_IndexedDataMapOfSolidClassifier | |
| TopOpeBRepTool_ListIteratorOfListOfC2DF | |
| TopOpeBRepTool_ListNodeOfListOfC2DF | |
| TopOpeBRepTool_ListOfC2DF | |
| TopOpeBRepTool_makeTransition | |
| TopOpeBRepTool_mkTondgE | |
| TopOpeBRepTool_PurgeInternalEdges | Remove from a shape, the internal edges that are not connected to any face in the shape. We can get the list of the edges as a DataMapOfShapeListOfShape with a Face of the Shape as the key and a list of internal edges as the value. The list of internal edges means edges that are not connected to any face in the shape |
| TopOpeBRepTool_REGUS | |
| TopOpeBRepTool_REGUW | |
| TopOpeBRepTool_ShapeClassifier | |
| TopOpeBRepTool_ShapeExplorer | |
| TopOpeBRepTool_ShapeTool | |
| TopOpeBRepTool_SolidClassifier | |
| TopOpeBRepTool_TOOL | |
| TopTools | The TopTools package provides utilities for the topological data structure |
| TopTools_Array1OfListOfShape | |
| TopTools_Array1OfShape | |
| TopTools_Array2OfShape | |
| TopTools_DataMapIteratorOfDataMapOfIntegerListOfShape | |
| TopTools_DataMapIteratorOfDataMapOfIntegerShape | |
| TopTools_DataMapIteratorOfDataMapOfOrientedShapeInteger | |
| TopTools_DataMapIteratorOfDataMapOfOrientedShapeShape | |
| TopTools_DataMapIteratorOfDataMapOfShapeInteger | |
| TopTools_DataMapIteratorOfDataMapOfShapeListOfInteger | |
| TopTools_DataMapIteratorOfDataMapOfShapeListOfShape | |
| TopTools_DataMapIteratorOfDataMapOfShapeReal | |
| TopTools_DataMapIteratorOfDataMapOfShapeSequenceOfShape | |
| TopTools_DataMapIteratorOfDataMapOfShapeShape | |
| TopTools_DataMapNodeOfDataMapOfIntegerListOfShape | |
| TopTools_DataMapNodeOfDataMapOfIntegerShape | |
| TopTools_DataMapNodeOfDataMapOfOrientedShapeInteger | |
| TopTools_DataMapNodeOfDataMapOfOrientedShapeShape | |
| TopTools_DataMapNodeOfDataMapOfShapeInteger | |
| TopTools_DataMapNodeOfDataMapOfShapeListOfInteger | |
| TopTools_DataMapNodeOfDataMapOfShapeListOfShape | |
| TopTools_DataMapNodeOfDataMapOfShapeReal | |
| TopTools_DataMapNodeOfDataMapOfShapeSequenceOfShape | |
| TopTools_DataMapNodeOfDataMapOfShapeShape | |
| TopTools_DataMapOfIntegerListOfShape | |
| TopTools_DataMapOfIntegerShape | |
| TopTools_DataMapOfOrientedShapeInteger | |
| TopTools_DataMapOfOrientedShapeShape | |
| TopTools_DataMapOfShapeInteger | |
| TopTools_DataMapOfShapeListOfInteger | |
| TopTools_DataMapOfShapeListOfShape | |
| TopTools_DataMapOfShapeReal | |
| TopTools_DataMapOfShapeSequenceOfShape | |
| TopTools_DataMapOfShapeShape | |
| TopTools_HArray1OfListOfShape | |
| TopTools_HArray1OfShape | |
| TopTools_HArray2OfShape | |
| TopTools_HSequenceOfShape | |
| TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeAddress | |
| TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeListOfShape | |
| TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeShape | |
| TopTools_IndexedDataMapOfShapeAddress | |
| TopTools_IndexedDataMapOfShapeListOfShape | |
| TopTools_IndexedDataMapOfShapeShape | |
| TopTools_IndexedMapNodeOfIndexedMapOfOrientedShape | |
| TopTools_IndexedMapNodeOfIndexedMapOfShape | |
| TopTools_IndexedMapOfOrientedShape | |
| TopTools_IndexedMapOfShape | |
| TopTools_ListIteratorOfListOfShape | |
| TopTools_ListNodeOfListOfShape | |
| TopTools_ListOfShape | |
| TopTools_LocationSet | The class LocationSet stores a set of location in a relocatable state |
| TopTools_MapIteratorOfMapOfOrientedShape | |
| TopTools_MapIteratorOfMapOfShape | |
| TopTools_MapOfOrientedShape | |
| TopTools_MapOfShape | |
| TopTools_MutexForShapeProvider | Class TopTools_MutexForShapeProvider This class is used to create and store mutexes associated with shapes |
| TopTools_OrientedShapeMapHasher | |
| TopTools_SequenceNodeOfSequenceOfShape | |
| TopTools_SequenceOfShape | |
| TopTools_ShapeMapHasher | Hash tool, used for generating maps of shapes in topology |
| TopTools_ShapeSet | A ShapeSets contains a Shape and all its sub-shapes and locations. It can be dump, write and read |
| TopTools_StdMapNodeOfMapOfOrientedShape | |
| TopTools_StdMapNodeOfMapOfShape | |
| TopTrans_Array2OfOrientation | |
| TopTrans_CurveTransition | This algorithm is used to compute the transition of a Curve intersecting a curvilinear boundary |
| TopTrans_SurfaceTransition | This algorithm is used to compute the transition of a 3D surface intersecting a topological surfacic boundary on a 3D curve ( intersection curve ). The boundary is described by a set of faces each face is described by |
| TPrsStd_AISPresentation | An attribute to associate an AIS_InteractiveObject to a label in an AIS viewer. This attribute works in collaboration with TPrsStd_AISViewer. Note that all the Set... and Unset... attribute methods as well as the query methods for visualization attributes and the HasOwn... test methods are shortcuts to the respective AIS_InteractiveObject settings |
| TPrsStd_AISViewer | The groundwork to define an interactive viewer attribute. This attribute stores an interactive context at the root label. You can only have one instance of this class per data framework |
| TPrsStd_AxisDriver | An implementation of TPrsStd_Driver for axes |
| TPrsStd_ConstraintDriver | An implementation of TPrsStd_Driver for constraints |
| TPrsStd_ConstraintTools | |
| TPrsStd_DataMapIteratorOfDataMapOfGUIDDriver | |
| TPrsStd_DataMapNodeOfDataMapOfGUIDDriver | |
| TPrsStd_DataMapOfGUIDDriver | |
| TPrsStd_Driver | <>Driver for AIS An abstract class, which - in classes inheriting from it - allows you to update an AIS_InteractiveObject or create one if one does not already exist. For both creation and update, the interactive object is filled with information contained in attributes. These attributes are those found on the label given as an argument in the method Update. true is returned if the interactive object was modified by the update. This class provide an algorithm to Build with its default values (if Null) or Update (if !Null) an AIS_InteractiveObject . Resources are found in attributes associated to a given label |
| TPrsStd_DriverTable | This class is a container to record (AddDriver) binding between GUID and TPrsStd_Driver. You create a new instance of TPrsStd_Driver and use the method AddDriver to load it into the driver table. the method |
| TPrsStd_GeometryDriver | This method is an implementation of TPrsStd_Driver for geometries |
| TPrsStd_NamedShapeDriver | An implementation of TPrsStd_Driver for named shapes |
| TPrsStd_PlaneDriver | An implementation of TPrsStd_Driver for planes |
| TPrsStd_PointDriver | An implementation of TPrsStd_Driver for points |
| Transfer_ActorDispatch | This class allows to work with a TransferDispatch, i.e. to transfer entities from a data set to another one defined by the same interface norm, with the following features : |
| Transfer_ActorOfFinderProcess | The original class was renamed. Compatibility only |
| Transfer_ActorOfProcessForFinder | |
| Transfer_ActorOfProcessForTransient | |
| Transfer_ActorOfTransientProcess | The original class was renamed. Compatibility only |
| Transfer_Binder | A Binder is an auxiliary object to Map the Result of the Transfer of a given Object : it records the Result of the Unitary Transfer (Resulting Object), status of progress and error (if any) of the Process |
| Transfer_BinderOfTransientInteger | This type of Binder allows to attach as result, besides a Transient Object, an Integer Value, which can be an Index in the Object if it defines a List, for instance |
| Transfer_DataInfo | Gives informations on an object Used as template to instantiate Mapper and SimpleBinder This class is for Transient |
| Transfer_DispatchControl | This is an auxiliary class for TransferDispatch, which allows to record simple copies, as CopyControl from Interface, but based on a TransientProcess. Hence, it allows in addition more actions (such as recording results of adaptations) |
| Transfer_Finder | Finder allows to map any kind of object as a Key for a Map. This works by defining, for a Hash Code, that of the real Key, not of the Finder which acts only as an intermediate. When a Map asks for the HashCode of a Finder, this one returns the code it has determined at creation time |
| Transfer_FinderProcess | Adds specific features to the generic definition : PrintTrace is adapted |
| Transfer_FindHasher | FindHasher defines HashCode for Finder, which is : ask a Finder its HashCode ! Because this is the Finder itself which brings the HashCode for its Key |
| Transfer_HSequenceOfBinder | |
| Transfer_HSequenceOfFinder | |
| Transfer_IndexedDataMapNodeOfTransferMapOfProcessForFinder | |
| Transfer_IndexedDataMapNodeOfTransferMapOfProcessForTransient | |
| Transfer_IteratorOfProcessForFinder | |
| Transfer_IteratorOfProcessForTransient | |
| Transfer_MapContainer | |
| Transfer_MultipleBinder | Allows direct binding between a starting Object and the Result of its transfer, when it can be made of several Transient Objects. Compared to a Transcriptor, it has no Transfer Action |
| Transfer_ProcessForFinder | |
| Transfer_ProcessForTransient | |
| Transfer_ResultFromModel | ResultFromModel is used to store a final result stored in a TransientProcess, respectfully to its structuration in scopes by using a set of ResultFromTransient Hence, it can be regarded as a passive equivalent of the stored data in the TransientProcess, while an Iterator gives a flat view of it |
| Transfer_ResultFromTransient | This class, in conjunction with ResultFromModel, allows to record the result of a transfer initially stored in a TransientProcess |
| Transfer_SequenceNodeOfSequenceOfBinder | |
| Transfer_SequenceNodeOfSequenceOfFinder | |
| Transfer_SequenceOfBinder | |
| Transfer_SequenceOfFinder | |
| Transfer_SimpleBinderOfTransient | An adapted instantiation of SimpleBinder for Transient Result, i.e. ResultType can be computed from the Result itself, instead of being static |
| Transfer_TransferDispatch | A TransferDispatch is aimed to dispatch Entities between two Interface Models, by default by copying them, as CopyTool, but with more capabilities of adapting : Copy is redefined to firstly pass the hand to a TransferProcess. If this gives no result, standard Copy is called |
| Transfer_TransferInput | A TransferInput is a Tool which fills an InterfaceModel with the result of the Transfer of CasCade Objects, once determined The Result comes from a TransferProcess, either from Transient (the Complete Result is considered, it must contain only Transient Objects) |
| Transfer_TransferIterator | Defines an Iterator on the result of a Transfer Available for Normal Results or not (Erroneous Transfer) It gives several kinds of Informations, and allows to consider various criteria (criteria are cumulative) |
| Transfer_TransferMapOfProcessForFinder | |
| Transfer_TransferMapOfProcessForTransient | |
| Transfer_TransferOutput | A TransferOutput is a Tool which manages the transfer of entities created by an Interface, stored in an InterfaceModel, into a set of Objects suitable for an Application Objects to be transferred are given, by method Transfer (which calls Transfer from TransientProcess) A default action is available to get all roots of the Model Result is given as a TransferIterator (see TransferProcess) Also, it is possible to pilot directly the TransientProcess |
| Transfer_TransientListBinder | This binder binds several (a list of) Transients with a starting entity, when this entity itself corresponds to a simple list of Transients. Each part is not seen as a sub-result of an independant componant, but as an item of a built-in list |
| Transfer_TransientMapper | |
| Transfer_TransientProcess | Adds specific features to the generic definition : TransientProcess is intended to work from an InterfaceModel to a set of application objects |
| Transfer_VoidBinder | VoidBinder is used to bind a starting item with a status, error or warning messages, but no result It is interpreted by TransferProcess, which admits a VoidBinder to be over-written, and copies its check to the new Binder |
| TransferBRep | This package gathers services to simply read files and convert them to Shapes from CasCade. IE. it can be used in conjunction with purely CasCade software |
| TransferBRep_BinderOfShape | Allows direct binding between a starting Object and the Result of its transfer when it is Unique. The Result itself is defined as a formal parameter <Shape from="" topods>=""> Warning : While it is possible to instantiate BinderOfShape with any Type for the Result, it is not advisable to instantiate it with Transient Classes, because such Results are directly known and managed by TransferProcess & Co, through SimpleBinderOfTransient : this class looks like instantiation of BinderOfShape, but its method ResultType is adapted (reads DynamicType of the Result) |
| TransferBRep_HSequenceOfTransferResultInfo | |
| TransferBRep_OrientedShapeMapper | |
| TransferBRep_Reader | This class offers a simple, easy to call, way of transferring data from interface files to Shapes from CasCade It must be specialized according to each norm/protocol, by : |
| TransferBRep_SequenceNodeOfSequenceOfTransferResultInfo | |
| TransferBRep_SequenceOfTransferResultInfo | |
| TransferBRep_ShapeBinder | A ShapeBinder is a BinderOfShape with some additional services to cast the Result under various kinds of Shapes |
| TransferBRep_ShapeInfo | Gives informations on an object, see template DataInfo This class is for Shape |
| TransferBRep_ShapeListBinder | This binder binds several (a list of) shapes with a starting entity, when this entity itself corresponds to a simple list of shapes. Each part is not seen as a sub-result of an independant componant, but as an item of a built-in list |
| TransferBRep_ShapeMapper | |
| TransferBRep_TransferResultInfo | Data structure for storing information on transfer result. At the moment it dispatches information for the following types: |
| TShort_Array1OfShortReal | |
| TShort_Array2OfShortReal | |
| TShort_HArray1OfShortReal | |
| TShort_HArray2OfShortReal | |
| TShort_HSequenceOfShortReal | |
| TShort_SequenceNodeOfSequenceOfShortReal | |
| TShort_SequenceOfShortReal | |
| Units | This package provides all the facilities to create and question a dictionary of units, and also to manipulate measurements which are real values with units |
| Units_Dimensions | This class includes all the methods to create and manipulate the dimensions of the physical quantities |
| Units_Explorer | This class provides all the services to explore UnitsSystem or UnitsDictionary |
| Units_Lexicon | This class defines a lexicon useful to analyse and recognize the different key words included in a sentence. The lexicon is stored in a sequence of tokens |
| Units_MathSentence | This class defines all the methods to create and compute an algebraic formula |
| Units_Measurement | This class defines a measurement which is the association of a real value and a unit |
| Units_QtsSequence | |
| Units_QuantitiesSequence | |
| Units_Quantity | This class stores in its field all the possible units of all the unit systems for a given physical quantity. Each unit's value is expressed in the S.I. unit system |
| Units_Sentence | This class describes all the methods to create and compute an expression contained in a string |
| Units_SequenceNodeOfQtsSequence | |
| Units_SequenceNodeOfTksSequence | |
| Units_SequenceNodeOfUtsSequence | |
| Units_ShiftedToken | The ShiftedToken class inherits from Token and describes tokens which have a gap in addition of the multiplicative factor. This kind of token allows the description of linear functions which do not pass through the origin, of the form : |
| Units_ShiftedUnit | This class is useful to describe units with a shifted origin in relation to another unit. A well known example is the Celsius degrees in relation to Kelvin degrees. The shift of the Celsius origin is 273.15 Kelvin degrees |
| Units_TksSequence | |
| Units_Token | This class defines an elementary word contained in a Sentence object |
| Units_TokensSequence | |
| Units_Unit | This class defines an elementary word contained in a physical quantity |
| Units_UnitsDictionary | This class creates a dictionary of all the units you want to know |
| Units_UnitSentence | This class describes all the facilities to manipulate and compute units contained in a string expression |
| Units_UnitsLexicon | This class defines a lexicon useful to analyse and recognize the different key words included in a sentence. The lexicon is stored in a sequence of tokens |
| Units_UnitsSequence | |
| Units_UnitsSystem | This class allows the user to define his own system of units |
| Units_UtsSequence | |
| UnitsAPI | The UnitsAPI global functions are used to convert a value from any unit into another unit. Principles Conversion is executed among three unit systems: |
| UnitsMethods | |
| UTL | |
| V3d | This package contains the set of commands and services of the 3D Viewer. It provides a set of high level commands to control the views and viewing modes. This package is complementary to the Visual3D graphic package |
| V3d_AmbientLight | Creation of an ambient light source in a viewer |
| V3d_CircularGrid | |
| V3d_ColorScale | A colorscale class |
| V3d_ColorScaleLayerItem | This class is drawable unit of ColorScale of 2d scene |
| V3d_DirectionalLight | Create and modify a directional light source in a viewer |
| V3d_LayerMgr | Class to manage layers |
| V3d_Light | Defines services on Light type objects.. (base class for AmbientLight and PositionLight) |
| V3d_ListOfTransient | List of transient objects with methods to check presence and remove elements |
| V3d_Plane | Obsolete clip plane presentation class. Ported on new core of Graphic3d_ClipPlane approach. Please access Graphic3d_ClipPlane via ClipPlane() method to use it for standard clipping workflow. Example of use: |
| V3d_PositionalLight | Creation and modification of an isolated (positional) light source |
| V3d_PositionLight | Base class for Positional, Spot and Directional Light classes |
| V3d_RectangularGrid | |
| V3d_SpotLight | Creation and modification of a spot |
| V3d_View | Defines the application object VIEW for the VIEWER application. The methods of this class allow the editing and inquiring the parameters linked to the view. (Projection,Mapping,Zclipping,DepthCueing,AntiAliasing et Conversions) . Provides a set of services common to all types of view. Warning: The default parameters are defined by the class Viewer (Example : SetDefaultViewSize()). Certain methods are mouse oriented, and it is necessary to know the difference between the start and the continuation of this gesture in putting the method into operation. Example : Shifting the eye-view along the screen axes |
| V3d_Viewer | Defines services on Viewer type objects. The methods of this class allow editing and interrogation of the parameters linked to the viewer its friend classes (View,light,plane) |
| Vardesc | |
| VarsTopo | |
| vec3 | |
| view_map3 | |
| ViewerTest | |
| ViewerTest_AutoUpdater | Auxiliary tool to control view updates |
| ViewerTest_DoubleMapIteratorOfDoubleMapOfInteractiveAndName | |
| ViewerTest_DoubleMapNodeOfDoubleMapOfInteractiveAndName | |
| ViewerTest_DoubleMapOfInteractiveAndName | |
| ViewerTest_EventManager | Used to manage mouse event (move,select,shiftselect) By default the events are transmitted to interactive context |
| Visual3d_ContextPick | This class allows the creation and update of a pick context for one view of the viewer. A context allows the control of different parameters before the activation of a pick |
| Visual3d_ContextView | This class manages the creation and update of a visualization context for one view in the viewer. A context is defined by : Antialiasing. ZClipping. Depth-cueing. The type of visualization. The light sources |
| Visual3d_HSequenceOfLight | |
| Visual3d_HSequenceOfView | |
| Visual3d_Layer | This class allows to manage 2d graphics |
| Visual3d_LayerItem | This class is drawable unit of 2d scene |
| Visual3d_Light | This class defines and updates light sources. There is no limit to the number of light sources defined. Only the number of active sources is limited |
| Visual3d_SequenceNodeOfSequenceOfLight | |
| Visual3d_SequenceNodeOfSequenceOfView | |
| Visual3d_SequenceOfLight | |
| Visual3d_SequenceOfView | |
| Visual3d_View | Creation and edition of a view in a 3D visualiser. A 3D view is composed of an "orientation" part defined by the position of the observer, the direction of view, and a "mapping" part defined by the type of projection (parallel or perspective) and by the window-viewport couple which allows passage from the projected coordinate space into the screen space. Summary of 3D Viewing To define a view, you must define: |
| Visual3d_ViewManager | This class allows the definition of a manager to which the views are associated. It allows them to be globally manipulated |
| Voxel_BoolDS | A 3D voxel model keeping a bool flag (1 or 0) value for each voxel |
| Voxel_BooleanOperation | Boolean operations (fuse, cut) for voxels of the same dimension |
| Voxel_CollisionDetection | Detects collisions between shapes |
| Voxel_ColorDS | A 3D voxel model keeping 4 bits for each voxel (one of 16 colors) |
| Voxel_DS | A base class for all voxel data structures |
| Voxel_FastConverter | Converts a shape to voxel representation. It does it fast, but with less precision. Also, it doesn't fill-in volumic part of the shape |
| Voxel_FloatDS | A 3D voxel model keeping a foating-point value for each voxel |
| Voxel_OctBoolDS | A 3D voxel model keeping a boolean flag (1 or 0) value for each voxel, and having an opportunity to split each voxel into 8 sub-voxels |
| Voxel_Prs | Interactive object for voxels |
| Voxel_Reader | Reads a cube of voxels from disk. Beware, a caller of the reader is responsible for deletion of the read voxels |
| Voxel_ROctBoolDS | A 3D voxel model keeping a boolean flag (1 or 0) value for each voxel, and having an opportunity to split each voxel into 8 sub-voxels recursively |
| Voxel_Selector | Detects voxels in the viewer 3d under the mouse cursor |
| Voxel_SplitData | A container of split information. An instance of this class is used as a slice in inner representation of recursive octtree voxels |
| Voxel_Writer | Writes a cube of voxels on disk |
| Vrml | Vrml package implements the specification of the VRML ( Virtual Reality Modeling Language ). VRML is a standard language for describing interactive 3-D objects and worlds delivered across Internet. Actual version of Vrml package have made for objects of VRML version 1.0. This package is used by VrmlConverter package. The developer should already be familiar with VRML specification before using this package |
| Vrml_AsciiText | Defines a AsciiText node of VRML specifying geometry shapes. This node represents strings of text characters from ASCII coded character set. All subsequent strings advance y by -( size * spacing). The justification field determines the placement of the strings in the x dimension. LEFT (the default) places the left edge of each string at x=0. CENTER places the center of each string at x=0. RIGHT places the right edge of each string at x=0. Text is rendered from left to right, top to bottom in the font set by FontStyle. The default value for the wigth field indicates the natural width should be used for that string |
| Vrml_Cone | Defines a Cone node of VRML specifying geometry shapes. This node represents a simple cone, whose central axis is aligned with the y-axis. By default , the cone is centred at (0,0,0) and has size of -1 to +1 in the all three directions. the cone has a radius of 1 at the bottom and height of 2, with its apex at 1 and its bottom at -1. The cone has two parts: the sides and the bottom |
| Vrml_Coordinate3 | Defines a Coordinate3 node of VRML specifying properties of geometry and its appearance. This node defines a set of 3D coordinates to be used by a subsequent IndexedFaceSet, IndexedLineSet, or PointSet node. This node does not produce a visible result during rendering; it simply replaces the current coordinates in the rendering state for subsequent nodes to use |
| Vrml_Cube | Defines a Cube node of VRML specifying geometry shapes. This node represents a cuboid aligned with the coordinate axes. By default , the cube is centred at (0,0,0) and measures 2 units in each dimension, from -1 to +1. A cube's width is its extent along its object-space X axis, its height is its extent along the object-space Y axis, and its depth is its extent along its object-space Z axis |
| Vrml_Cylinder | Defines a Cylinder node of VRML specifying geometry shapes. This node represents a simple capped cylinder centred around the y-axis. By default , the cylinder is centred at (0,0,0) and has size of -1 to +1 in the all three dimensions. The cylinder has three parts: the sides, the top (y=+1) and the bottom (y=-1) |
| Vrml_DirectionalLight | Defines a directional light node of VRML specifying properties of lights. This node defines a directional light source that illuminates along rays parallel to a given 3-dimentional vector Color is written as an RGB triple. Light intensity must be in the range 0.0 to 1.0, inclusive |
| Vrml_FontStyle | Defines a FontStyle node of VRML of properties of geometry and its appearance. The size field specifies the height (in object space units) of glyphs rendered and determines the vertical spacing of adjacent lines of text |
| Vrml_Group | Defines a Group node of VRML specifying group properties. This node defines the base class for all group nodes. Group is a node that contains an ordered list of child nodes. This node is simply a container for the child nodes and does not alter the traversal state in any way. During traversal, state accumulated for a child is passed on to each successive child and then to the parents of the group (Group does not push or pop traversal state as separator does) |
| Vrml_IndexedFaceSet | Defines a IndexedFaceSet node of VRML specifying geometry shapes. This node represents a 3D shape formed by constructing faces (polygons) from vertices located at the current coordinates. IndexedFaceSet uses the indices in its coordIndex to define polygonal faces. An index of -1 separates faces (so a -1 at the end of the list is optional) |
| Vrml_IndexedLineSet | Defines a IndexedLineSet node of VRML specifying geometry shapes. This node represents a 3D shape formed by constructing polylines from vertices located at the current coordinates. IndexedLineSet uses the indices in its coordIndex field to specify the polylines. An index of -1 separates one polyline from the next (thus, a final -1 is optional). the current polyline has ended and the next one begins. Treatment of the current material and normal binding is as follows: The PER_PART binding specifies a material or normal for each segment of the line. The PER_FACE binding specifies a material or normal for each polyline. PER_VERTEX specifies a material or normal for each vertex. The corresponding _INDEXED bindings are the same, but use the materialIndex or normalIndex indices. The DEFAULT material binding is equal to OVERALL. The DEFAULT normal binding is equal to PER_VERTEX_INDEXED; if insufficient normals exist in the state, the lines will be drawn unlit. The same rules for texture coordinate generation as IndexedFaceSet are used |
| Vrml_Info | Defines a Info node of VRML specifying properties of geometry and its appearance. It is used to store information in the scene graph, Typically for application-specific purposes, copyright messages, or other strings |
| Vrml_Instancing | Defines "instancing" - using the same instance of a node multiple times. It is accomplished by using the "DEF" and "USE" keywords. The DEF keyword both defines a named node, and creates a single instance of it. The USE keyword indicates that the most recently defined instance should be used again. If several nades were given the same name, then the last DEF encountered during parsing "wins". DEF/USE is limited to a single file |
| Vrml_LOD | Defines a LOD (level of detailization) node of VRML specifying properties of geometry and its appearance. This group node is used to allow applications to switch between various representations of objects automatically. The children of this node typically represent the same object or objects at the varying of Levels Of Detail (LOD), from highest detail to lowest |
| Vrml_Material | Defines a Material node of VRML specifying properties of geometry and its appearance. This node defines the current surface material properties for all subsequent shapes. Material sets several components of the current material during traversal. Different shapes interpret materials with multiple values differently. To bind materials to shapes, use a MaterialBinding node |
| Vrml_MaterialBinding | Defines a MaterialBinding node of VRML specifying properties of geometry and its appearance. Material nodes may contain more than one material. This node specifies how the current materials are bound to shapes that follow in the scene graph. Each shape node may interpret bindings differently. For example, a Sphere node is always drawn using the first material in the material node, no matter what the current MaterialBinding, while a Cube node may use six different materials to draw each of its six faces, depending on the MaterialBinding |
| Vrml_MatrixTransform | Defines a MatrixTransform node of VRML specifying matrix and transform properties. This node defines 3D transformation with a 4 by 4 matrix. By default : a11=1 a12=0 a13=0 a14=0 a21=0 a22=1 a23=0 a24=0 a31=0 a32=0 a33=1 a34=0 a41=0 a42=0 a43=0 a44=1 It is written to the file in row-major order as 16 Real numbers separated by whitespace. For example , matrix expressing a translation of 7.3 units along the X axis is written as: 1 0 0 0 0 1 0 0 0 0 1 0 7.3 0 0 1 |
| Vrml_Normal | Defines a Normal node of VRML specifying properties of geometry and its appearance. This node defines a set of 3D surface normal vectors to be used by vertex-based shape nodes (IndexedFaceSet, IndexedLineSet, PointSet) that follow it in the scene graph. This node does not produce a visible result during rendering; it simply replaces the current normals in the rendering state for subsequent nodes to use. This node contains one multiple-valued field that contains the normal vectors |
| Vrml_NormalBinding | Defines a NormalBinding node of VRML specifying properties of geometry and its appearance. This node specifies how the current normals are bound to shapes that follow in the scene graph. Each shape node may interpret bindings differently. The bindings for faces and vertices are meaningful only for shapes that are made from faces and vertices. Similarly, the indexed bindings are only used by the shapes that allow indexing. For bindings that require multiple normals, be sure to have at least as many normals defined as are necessary; otherwise, errors will occur |
| Vrml_OrthographicCamera | OrthographicCamera node of VRML specifying properties of cameras. An orthographic camera defines a parallel projection from a viewpoint. This camera does not diminish objects with distance, as a PerspectiveCamera does. The viewing volume for an orthographic camera is a rectangular parallelepiped (a box) |
| Vrml_PerspectiveCamera | PerspectiveCamera node of VRML specifying properties of cameras. A perspective camera defines a perspective projection from a viewpoint. The viewing volume for a perspective camera is a truncated right pyramid |
| Vrml_PointLight | Defines a point light node of VRML specifying properties of lights. This node defines a point light source at a fixed 3D location A point source illuminates equally in all directions; that is omni-directional. Color is written as an RGB triple. Light intensity must be in the range 0.0 to 1.0, inclusive |
| Vrml_PointSet | Defines a PointSet node of VRML specifying geometry shapes |
| Vrml_Rotation | Defines a Rotation node of VRML specifying matrix and transform properties. This node defines a 3D rotation about an arbitrary axis through the origin. By default : myRotation = (0 0 1 0) |
| Vrml_Scale | Defines a Scale node of VRML specifying transform properties. This node defines a 3D scaling about the origin. By default : myRotation = (1 1 1) |
| Vrml_Separator | Defines a Separator node of VRML specifying group properties. This group node performs a push (save) of the traversal state before traversing its children and a pop (restore) after traversing them. This isolates the separator's children from the rest of the scene graph. A separator can include lights, cameras, coordinates, normals, bindings, and all other properties. Separators can also perform render culling. Render culling skips over traversal of the separator's children if they are not going to be rendered, based on the comparison of the separator's bounding box with the current view volume. Culling is controlled by the renderCulling field. These are set to AUTO by default, allowing the implementation to decide whether or not to cull |
| Vrml_SFImage | Defines SFImage type of VRML field types |
| Vrml_SFRotation | Defines SFRotation type of VRML field types. The 4 values represent an axis of rotation followed by amount of right-handed rotation about the that axis, in radians |
| Vrml_ShapeHints | Defines a ShapeHints node of VRML specifying properties of geometry and its appearance. The ShapeHints node indicates that IndexedFaceSets are solid, contain ordered vertices, or contain convex faces. These hints allow VRML implementations to optimize certain rendering features. Optimizations that may be performed include enabling back-face culling and disabling two-sided lighting. For example, if an object is solid and has ordered vertices, an implementation may turn on backface culling and turn off two-sided lighting. To ensure that an IndexedFaceSet can be viewed from either direction, set shapeType to be UNKNOWN_SHAPE_TYPE. If you know that your shapes are closed and will alwsys be viewed from the outside, set vertexOrdering to be either CLOCKWISE or COUNTERCLOCKWISE (depending on how you built your object), and set shapeType to be SOLID. Placing this near the top of your VRML file will allow the scene to be rendered much faster. The ShapeHints node also affects how default normals are generated. When an IndexedFaceSet has to generate default normals, it uses the creaseAngle field to determine which edges should be smoothly shaded and which ones should have a sharp crease. The crease angle is the angle between surface normals on adjacent polygons. For example, a crease angle of .5 radians (the default value) means that an edge between two adjacent polygonal faces will be smooth shaded if the normals to the two faces form an angle that is less than .5 radians (about 30 degrees). Otherwise, it will be faceted |
| Vrml_Sphere | Defines a Sphere node of VRML specifying geometry shapes. This node represents a sphere. By default , the sphere is centred at (0,0,0) and has a radius of 1 |
| Vrml_SpotLight | Spot light node of VRML nodes specifying properties of lights. This node defines a spotlight light source. A spotlight is placed at a fixed location in 3D-space and illuminates in a cone along a particular direction. The intensity of the illumination drops off exponentially as a ray of light diverges from this direction toward the edges of cone. The rate of drop-off and agle of the cone are controlled by the dropOfRate and cutOffAngle Color is written as an RGB triple. Light intensity must be in the range 0.0 to 1.0, inclusive |
| Vrml_Switch | Defines a Switch node of VRML specifying group properties. This group node traverses one, none, or all of its children. One can use this node to switch on and off the effects of some properties or to switch between different properties. The whichChild field specifies the index of the child to traverse, where the first child has index 0. A value of -1 (the default) means do not traverse any children. A value of -3 traverses all children, making the switch behave exactly like a regular Group |
| Vrml_Texture2 | Defines a Texture2 node of VRML specifying properties of geometry and its appearance. This property node defines a texture map and parameters for that map The texture can be read from the URL specified by the filename field. To turn off texturing, set the filename field to an empty string (""). Textures can alsobe specified inline by setting the image field to contain the texture data. By default : myFilename ("") myImage (0 0 0) myWrapS (Vrml_REPEAT) myWrapT (Vrml_REPEAT) |
| Vrml_Texture2Transform | Defines a Texture2Transform node of VRML specifying properties of geometry and its appearance. This node defines a 2D transformation applied to texture coordinates. This affect the way textures are applied to the surfaces of subsequent shapes. Transformation consisits of(in order) a non-uniform scale about an arbitrary center point, a rotation about that same point, and a translation. This allows a user to change the size and position of the textures on the shape. By default : myTranslation (0 0) myRotation (0) myScaleFactor (1 1) myCenter (0 0) |
| Vrml_TextureCoordinate2 | Defines a TextureCoordinate2 node of VRML specifying properties of geometry and its appearance. This node defines a set of 2D coordinates to be used to map textures to the vertices of subsequent PointSet, IndexedLineSet, or IndexedFaceSet objects. It replaces the current texture coordinates in the rendering state for the shapes to use. Texture coordinates range from 0 to 1 across the texture. The horizontal coordinate, called S, is specified first, followed by vertical coordinate, T. By default : myPoint (0 0) |
| Vrml_Transform | Defines a Transform of VRML specifying transform properties. This node defines a geometric 3D transformation consisting of (in order) a (possibly) non-uniform scale about an arbitrary point, a rotation about an arbitrary point and axis and translation. By default : myTranslation (0,0,0) myRotation (0,0,1,0) myScaleFactor (1,1,1) myScaleOrientation (0,0,1,0) myCenter (0,0,0) |
| Vrml_TransformSeparator | Defines a TransformSeparator node of VRML specifying group properties. This group node is similar to separator node in that it saves state before traversing its children and restores it afterwards. This node can be used to isolate transformations to light sources or objects |
| Vrml_Translation | Defines a Translation of VRML specifying transform properties. This node defines a translation by 3D vector. By default : myTranslation (0,0,0) |
| Vrml_WWWAnchor | Defines a WWWAnchor node of VRML specifying group properties. The WWWAnchor group node loads a new scene into a VRML browser when one of its children is closen. Exactly how a user "chooses" a child of the WWWAnchor is up to the VRML browser. WWWAnchor with an empty ("") name does nothing when its children are chosen. WWWAnchor behaves like a Separator, pushing the traversal state before traversing its children and popping it afterwards |
| Vrml_WWWInline | Defines a WWWInline node of VRML specifying group properties. The WWWInline group node reads its children from anywhere in the World Wide Web. Exactly when its children are read is not defined; reading the children may be delayed until the WWWInline is actually displayed. WWWInline with an empty ("") name does nothing. WWWInline behaves like a Separator, pushing the traversal state before traversing its children and popping it afterwards. By defaults: myName ("") myBboxSize (0,0,0) myBboxCenter (0,0,0) |
| VrmlAPI | API for writing to VRML 1.0 |
| VrmlAPI_Writer | Creates and writes VRML files from Open CASCADE shapes. A VRML file can be written to an existing VRML file or to a new one |
| VrmlConverter_Curve | Curve - computes the presentation of objects to be seen as curves (the computation will be made with a constant number of points), converts this one into VRML objects and writes (adds) them into anOStream. All requested properties of the representation are specify in aDrawer of Drawer class (VrmlConverter). This kind of the presentation is converted into IndexedLineSet ( VRML ) |
| VrmlConverter_DeflectionCurve | DeflectionCurve - computes the presentation of objects to be seen as curves, converts this one into VRML objects and writes (adds) into anOStream. All requested properties of the representation are specify in aDrawer. This kind of the presentation is converted into IndexedLineSet ( VRML ). The computation will be made according to a maximal chordial deviation |
| VrmlConverter_Drawer | Qualifies the aspect properties for the VRML conversation of a specific kind of object. This includes for example color, maximal chordial deviation, etc.. |
| VrmlConverter_HLRShape | HLRShape - computes the presentation of objects with removal of their hidden lines for a specific projector, converts them into VRML objects and writes (adds) them into anOStream. All requested properties of the representation are specify in aDrawer of Drawer class. This kind of the presentation is converted into IndexedLineSet and if they are defined in Projector into : PerspectiveCamera, OrthographicCamera, DirectionLight, PointLight, SpotLight from Vrml package |
| VrmlConverter_IsoAspect | Qualifies the aspect properties for the VRML conversation of iso curves |
| VrmlConverter_LineAspect | Qualifies the aspect properties for the VRML conversation of a Curve and a DeflectionCurve |
| VrmlConverter_PointAspect | Qualifies the aspect properties for the VRML conversation of a Point Set |
| VrmlConverter_Projector | Defines projector and calculates properties of cameras and lights from Vrml ( OrthograpicCamera, PerspectiveCamera, DirectionalLight, PointLight, SpotLight and MatrixTransform ) to display all scene shapes with arbitrary locations for requested the Projection Vector, High Point Direction and the Focus and adds them ( method Add ) to anOSream |
| VrmlConverter_ShadedShape | ShadedShape - computes the shading presentation of shapes by triangulation algorithms, converts this one into VRML objects and writes (adds) into anOStream. All requested properties of the representation including the maximal chordial deviation are specify in aDrawer. This kind of the presentation is converted into IndexedFaceSet ( VRML ) |
| VrmlConverter_ShadingAspect | Qualifies the aspect properties for the VRML conversation of ShadedShape |
| VrmlConverter_WFDeflectionRestrictedFace | WFDeflectionRestrictedFace - computes the wireframe presentation of faces with restrictions by displaying a given number of U and/or V isoparametric curves, converts his into VRML objects and writes (adds) them into anOStream. All requested properties of the representation are specify in aDrawer of Drawer class (Prs3d). This kind of the presentation is converted into IndexedFaceSet and IndexedLineSet ( VRML ) |
| VrmlConverter_WFDeflectionShape | WFDeflectionShape - computes the wireframe presentation of compound set of faces, edges and vertices by displaying a given number of U and/or V isoparametric curves, converts this one into VRML objects and writes (adds) them into anOStream. All requested properties of the representation are specify in aDrawer. This kind of the presentation is converted into IndexedLineSet and PointSet ( VRML ) |
| VrmlConverter_WFRestrictedFace | WFRestrictedFace - computes the wireframe presentation of faces with restrictions by displaying a given number of U and/or V isoparametric curves, converts this one into VRML objects and writes (adds) into anOStream. All requested properties of the representation are specify in aDrawer. This kind of the presentation is converted into IndexedLineSet ( VRML ) |
| VrmlConverter_WFShape | WFShape - computes the wireframe presentation of compound set of faces, edges and vertices by displaying a given number of U and/or V isoparametric curves converts this one into VRML objects and writes (adds) them into anOStream. All requested properties of the representation are specify in aDrawer. This kind of the presentation is converted into IndexedLineSet and PointSet ( VRML ) |
| VrmlData_Appearance | |
| VrmlData_ArrayVec3d | |
| VrmlData_Box | |
| VrmlData_Color | |
| VrmlData_Cone | |
| VrmlData_Coordinate | |
| VrmlData_Cylinder | |
| VrmlData_DataMapOfShapeAppearance | |
| VrmlData_Faceted | |
| VrmlData_Geometry | |
| VrmlData_Group | |
| VrmlData_ImageTexture | |
| VrmlData_InBuffer | |
| VrmlData_IndexedFaceSet | |
| VrmlData_IndexedLineSet | |
| VrmlData_Material | |
| VrmlData_Node | |
| VrmlData_Normal | |
| VrmlData_Scene | |
| VrmlData_ShapeConvert | |
| VrmlData_ShapeNode | |
| VrmlData_Sphere | |
| VrmlData_Texture | |
| VrmlData_TextureCoordinate | |
| VrmlData_TextureTransform | Implementation of the TextureTransform node |
| VrmlData_UnknownNode | |
| VrmlData_WorldInfo | |
| WNT_WClass | This class defines a Windows NT window class. A window in Windows NT is always created based on a window class. The window class identifies the window procedure that processes messages to the window. Each window class has unique name ( character string ). More than one window can be created based on a single window class. For example, all button windows in Windows NT are created based on the same window class. The window class defines the window procedure and some other characteristics ( background, mouse cursor shape etc. ) of the windows that are created based on that class. When we create a window, we define additional characteristics of the window that are unique to that window. So, we have to create and register window class before creation of any window. Of course, it's possible to create a new window class for each window inside the Window class and do not use the WClass at all. We implemented this class for sake of flexibility of event processing |
| WNT_Window | This class defines Windows NT window |
| XBRepMesh | |
| XCAFApp_Application | Implements an Application for the DECAF documents |
| XCAFDoc | Definition of general structure of DECAF document and tools to work with it |
| XCAFDoc_Area | Attribute to store area |
| XCAFDoc_Centroid | Attribute to store centroid |
| XCAFDoc_Color | Attribute to store color |
| XCAFDoc_ColorTool | Provides tools to store and retrieve attributes (colors) of TopoDS_Shape in and from TDocStd_Document A Document is intended to hold different attributes of ONE shape and it's sub-shapes Provide tools for management of Colors section of document |
| XCAFDoc_DataMapIteratorOfDataMapOfShapeLabel | |
| XCAFDoc_DataMapNodeOfDataMapOfShapeLabel | |
| XCAFDoc_DataMapOfShapeLabel | |
| XCAFDoc_Datum | Attribute to store datum |
| XCAFDoc_DimTol | Attribute to store dimension and tolerance |
| XCAFDoc_DimTolTool | Provides tools to store and retrieve attributes (colors) of TopoDS_Shape in and from TDocStd_Document A Document is intended to hold different attributes of ONE shape and it's sub-shapes. Attribute containing DimTol section of DECAF document. Provide tools for management of DimTol section of document |
| XCAFDoc_DocumentTool | Defines sections structure of an XDE document. attribute marking CAF document as being DECAF document. Creates the sections structure of the document |
| XCAFDoc_GraphNode | This attribute allow user multirelation tree of labels. This GraphNode is experimental Graph that not control looping and redundance. Attribute containg sequence of father's and child's labels. Provide create and work with Graph in XCAFDocument |
| XCAFDoc_GraphNodeSequence | |
| XCAFDoc_LayerTool | Provides tools to store and retrieve attributes (Layers) of TopoDS_Shape in and from TDocStd_Document A Document is intended to hold different attributes of ONE shape and it's sub-shapes Provide tools for management of Layers section of document |
| XCAFDoc_Location | Attribute to store TopLoc_Location |
| XCAFDoc_Material | Attribute to store material |
| XCAFDoc_MaterialTool | Provides tools to store and retrieve attributes (materials) of TopoDS_Shape in and from TDocStd_Document A Document is intended to hold different attributes of ONE shape and it's sub-shapes Provide tools for management of Materialss section of document |
| XCAFDoc_SequenceNodeOfGraphNodeSequence | |
| XCAFDoc_ShapeMapTool | Attribute containing map of sub shapes |
| XCAFDoc_ShapeTool | A tool to store shapes in an XDE document in the form of assembly structure, and to maintain this structure. Attribute containing Shapes section of DECAF document. Provide tools for management of Shapes section. The API provided by this class allows to work with this structure regardless of its low-level implementation. All the shapes are stored on child labels of a main label which is XCAFDoc_DocumentTool::LabelShapes(). The label for assembly also has sub-labels, each of which represents the instance of another shape in that assembly (component). Such sub-label stores reference to the label of the original shape in the form of TDataStd_TreeNode with GUID XCAFDoc::ShapeRefGUID(), and its location encapsulated into the NamedShape. For correct work with an XDE document, it is necessary to use methods for analysis and methods for working with shapes. For example: if ( STool->IsAssembly(aLabel) ) { Standard_Boolean subchilds = Standard_False; (default) Standard_Integer nbc = STool->NbComponents (aLabel[,subchilds]); } If subchilds is True, commands also consider sub-levels. By default, only level one is checked. In this example, number of children from the first level of assembly will be returned. Methods for creation and initialization: Constructor: XCAFDoc_ShapeTool::XCAFDoc_ShapeTool() Getting a guid: Standard_GUID GetID (); Creation (if does not exist) of ShapeTool on label L: Handle(XCAFDoc_ShapeTool) XCAFDoc_ShapeTool::Set(const TDF_Label& L) Analyze whether shape is a simple shape or an instance or a component of an assembly or it is an assembly ( methods of analysis). For example: STool->IsShape(aLabel) ; Analyze that the label represents a shape (simple shape, assembly or reference) or STool->IsTopLevel(aLabel); Analyze that the label is a label of a top-level shape. Work with simple shapes, assemblies and instances ( methods for work with shapes). For example: Add shape: Standard_Boolean makeAssembly; // True to interpret a Compound as an Assembly, False to take it as a whole aLabel = STool->AddShape(aShape, makeAssembly); Get shape: TDF_Label aLabel... // A label must be present if (aLabel.IsNull()) { ... no such label : abandon .. } TopoDS_Shape aShape; aShape = STool->GetShape(aLabel); if (aShape.IsNull()) { ... this label is not for a Shape ... } To get a label from shape. Standard_Boolean findInstance = Standard_False; (this is default value) aLabel = STool->FindShape(aShape [,findInstance]); if (aLabel.IsNull()) { ... no label found for this shape ... } |
| XCAFDoc_Volume | Attribute to store volume |
| XCAFDrivers | |
| XCAFDrivers_DocumentRetrievalDriver | Retrieval driver of a XS document |
| XCAFDrivers_DocumentStorageDriver | Storage driver of a XS document |
| XCAFPrs | Presentation (visualiation, selection etc.) tools for DECAF documents |
| XCAFPrs_AISObject | Implements AIS_InteractiveObject functionality for shape in DECAF document |
| XCAFPrs_DataMapIteratorOfDataMapOfShapeStyle | |
| XCAFPrs_DataMapIteratorOfDataMapOfStyleShape | |
| XCAFPrs_DataMapIteratorOfDataMapOfStyleTransient | |
| XCAFPrs_DataMapNodeOfDataMapOfShapeStyle | |
| XCAFPrs_DataMapNodeOfDataMapOfStyleShape | |
| XCAFPrs_DataMapNodeOfDataMapOfStyleTransient | |
| XCAFPrs_DataMapOfShapeStyle | |
| XCAFPrs_DataMapOfStyleShape | |
| XCAFPrs_DataMapOfStyleTransient | |
| XCAFPrs_Driver | Implements a driver for presentation of shapes in DECAF document. Its the only purpose is to initialize and return XCAFPrs_AISObject object on request |
| XCAFPrs_Style | Represents a set of styling settings applicable to a (sub)shape |
| XCAFSchema | Schema |
| XCAFSchema_DBC_VArrayOfCharacter | |
| XCAFSchema_DBC_VArrayOfExtCharacter | |
| XCAFSchema_gp_Ax1 | |
| XCAFSchema_gp_Ax2 | |
| XCAFSchema_gp_Ax2d | |
| XCAFSchema_gp_Ax3 | |
| XCAFSchema_gp_Dir | |
| XCAFSchema_gp_Dir2d | |
| XCAFSchema_gp_Mat | |
| XCAFSchema_gp_Mat2d | |
| XCAFSchema_gp_Pnt | |
| XCAFSchema_gp_Pnt2d | |
| XCAFSchema_gp_Trsf | |
| XCAFSchema_gp_Trsf2d | |
| XCAFSchema_gp_Vec | |
| XCAFSchema_gp_Vec2d | |
| XCAFSchema_gp_XY | |
| XCAFSchema_gp_XYZ | |
| XCAFSchema_PCollection_HAsciiString | |
| XCAFSchema_PCollection_HExtendedString | |
| XCAFSchema_PColStd_FieldOfHArray1OfReal | |
| XCAFSchema_PColStd_HArray1OfReal | |
| XCAFSchema_PDF_Attribute | |
| XCAFSchema_PMMgt_PManaged | |
| XCAFSchema_PTopLoc_Datum3D | |
| XCAFSchema_PTopLoc_ItemLocation | |
| XCAFSchema_PTopLoc_Location | |
| XCAFSchema_PXCAFDoc_Area | |
| XCAFSchema_PXCAFDoc_Centroid | |
| XCAFSchema_PXCAFDoc_Color | |
| XCAFSchema_PXCAFDoc_ColorTool | |
| XCAFSchema_PXCAFDoc_Datum | |
| XCAFSchema_PXCAFDoc_DimTol | |
| XCAFSchema_PXCAFDoc_DimTolTool | |
| XCAFSchema_PXCAFDoc_DocumentTool | |
| XCAFSchema_PXCAFDoc_GraphNode | |
| XCAFSchema_PXCAFDoc_GraphNodeSequence | |
| XCAFSchema_PXCAFDoc_LayerTool | |
| XCAFSchema_PXCAFDoc_Location | |
| XCAFSchema_PXCAFDoc_Material | |
| XCAFSchema_PXCAFDoc_MaterialTool | |
| XCAFSchema_PXCAFDoc_SeqNodeOfGraphNodeSequence | |
| XCAFSchema_PXCAFDoc_ShapeTool | |
| XCAFSchema_PXCAFDoc_Volume | |
| XCAFSchema_Quantity_Color | |
| XCAFSchema_Standard_GUID | |
| XCAFSchema_Standard_Persistent | |
| XCAFSchema_Standard_Storable | |
| XDEDRAW | Provides DRAW commands for work with DECAF data structures |
| XDEDRAW_Colors | Contains commands to work with colors |
| XDEDRAW_Common | |
| XDEDRAW_Layers | Contains commands to work with layers |
| XDEDRAW_Props | Contains commands to work with geometric validation properties of shapes |
| XDEDRAW_Shapes | Contains commands to work with shapes and assemblies |
| XmlDrivers | |
| XmlDrivers_DocumentRetrievalDriver | |
| XmlDrivers_DocumentStorageDriver | |
| XmlLDrivers | |
| XmlLDrivers_DocumentRetrievalDriver | |
| XmlLDrivers_DocumentStorageDriver | |
| XmlLDrivers_NamespaceDef | |
| XmlLDrivers_SequenceNodeOfSequenceOfNamespaceDef | |
| XmlLDrivers_SequenceOfNamespaceDef | |
| XmlMDataStd | Storage and Retrieval drivers for modelling attributes. Transient attributes are defined in package TDataStd |
| XmlMDataStd_AsciiStringDriver | TDataStd_AsciiString attribute Driver |
| XmlMDataStd_BooleanArrayDriver | |
| XmlMDataStd_BooleanListDriver | |
| XmlMDataStd_ByteArrayDriver | |
| XmlMDataStd_CommentDriver | Attribute Driver |
| XmlMDataStd_DirectoryDriver | Attribute Driver |
| XmlMDataStd_ExpressionDriver | Attribute Driver |
| XmlMDataStd_ExtStringArrayDriver | Attribute Driver |
| XmlMDataStd_ExtStringListDriver | |
| XmlMDataStd_IntegerArrayDriver | Attribute Driver |
| XmlMDataStd_IntegerDriver | Attribute Driver |
| XmlMDataStd_IntegerListDriver | |
| XmlMDataStd_IntPackedMapDriver | TDataStd_IntPackedMap attribute Driver |
| XmlMDataStd_NamedDataDriver | |
| XmlMDataStd_NameDriver | Attribute Driver |
| XmlMDataStd_NoteBookDriver | Attribute Driver |
| XmlMDataStd_RealArrayDriver | Attribute Driver |
| XmlMDataStd_RealDriver | Attribute Driver |
| XmlMDataStd_RealListDriver | |
| XmlMDataStd_ReferenceArrayDriver | |
| XmlMDataStd_ReferenceListDriver | |
| XmlMDataStd_RelationDriver | Attribute Driver |
| XmlMDataStd_TickDriver | |
| XmlMDataStd_TreeNodeDriver | Attribute Driver |
| XmlMDataStd_UAttributeDriver | Attribute Driver |
| XmlMDataStd_VariableDriver | Attribute Driver |
| XmlMDataXtd | Storage and Retrieval drivers for modelling attributes. Transient attributes are defined in package TDataXtd |
| XmlMDataXtd_AxisDriver | Attribute Driver |
| XmlMDataXtd_ConstraintDriver | Attribute Driver |
| XmlMDataXtd_GeometryDriver | Attribute Driver |
| XmlMDataXtd_PatternStdDriver | Attribute Driver |
| XmlMDataXtd_PlacementDriver | Attribute Driver |
| XmlMDataXtd_PlaneDriver | Attribute Driver |
| XmlMDataXtd_PointDriver | Attribute Driver |
| XmlMDataXtd_ShapeDriver | Attribute Driver |
| XmlMDF | This package provides classes and methods to translate a transient DF into a persistent one and vice versa |
| XmlMDF_ADriver | Attribute Storage/Retrieval Driver |
| XmlMDF_ADriverTable | A driver table is an object building links between object types and object drivers. In the translation process, a driver table is asked to give a translation driver for each current object to be translated |
| XmlMDF_DataMapIteratorOfMapOfDriver | |
| XmlMDF_DataMapIteratorOfTypeADriverMap | |
| XmlMDF_DataMapNodeOfMapOfDriver | |
| XmlMDF_DataMapNodeOfTypeADriverMap | |
| XmlMDF_MapOfDriver | |
| XmlMDF_ReferenceDriver | Attribute Driver |
| XmlMDF_TagSourceDriver | Attribute Driver |
| XmlMDF_TypeADriverMap | |
| XmlMDocStd | Driver for TDocStd_XLink |
| XmlMDocStd_XLinkDriver | Attribute Driver |
| XmlMFunction | |
| XmlMFunction_FunctionDriver | Attribute Driver |
| XmlMFunction_GraphNodeDriver | XML persistence driver for dependencies of a function |
| XmlMFunction_ScopeDriver | XML persistence driver for a scope of functions |
| XmlMNaming | |
| XmlMNaming_NamedShapeDriver | |
| XmlMNaming_NamingDriver | |
| XmlMNaming_Shape1 | The XmlMNaming_Shape1 is the Persistent view of a TopoDS_Shape |
| XmlMPrsStd | |
| XmlMPrsStd_AISPresentationDriver | Attribute Driver |
| XmlMPrsStd_PositionDriver | Attribute Driver |
| XmlMXCAFDoc | Storage and Retrieval drivers for modelling attributes. Transient attributes are defined in package XCAFDoc |
| XmlMXCAFDoc_AreaDriver | Attribute Driver |
| XmlMXCAFDoc_CentroidDriver | Attribute Driver |
| XmlMXCAFDoc_ColorDriver | Attribute Driver |
| XmlMXCAFDoc_ColorToolDriver | Attribute Driver |
| XmlMXCAFDoc_DatumDriver | Attribute Driver |
| XmlMXCAFDoc_DimTolDriver | Attribute Driver |
| XmlMXCAFDoc_DimTolToolDriver | Attribute Driver |
| XmlMXCAFDoc_DocumentToolDriver | Attribute Driver |
| XmlMXCAFDoc_GraphNodeDriver | Attribute Driver |
| XmlMXCAFDoc_LayerToolDriver | Attribute Driver |
| XmlMXCAFDoc_LocationDriver | Attribute Driver |
| XmlMXCAFDoc_MaterialDriver | Attribute Driver |
| XmlMXCAFDoc_MaterialToolDriver | Attribute Driver |
| XmlMXCAFDoc_ShapeToolDriver | Attribute Driver |
| XmlMXCAFDoc_VolumeDriver | Attribute Driver |
| XmlObjMgt | This package defines services to manage the storage grain of data produced by applications and those classes to manage persistent extern reference |
| XmlObjMgt_Array1 | The class Array1 represents unidimensionnal array of fixed size known at run time. The range of the index is user defined. Warning: Programs clients of such class must be independant of the range of the first element. Then, a C++ for loop must be written like this for (i = A->Lower(); i <= A->Upper(); i++) |
| XmlObjMgt_GP | Translation of gp (simple geometry) objects |
| XmlObjMgt_Persistent | Root for XML-persistence |
| XmlTObjDrivers | |
| XmlTObjDrivers_DocumentRetrievalDriver | |
| XmlTObjDrivers_DocumentStorageDriver | |
| XmlTObjDrivers_IntSparseArrayDriver | |
| XmlTObjDrivers_ModelDriver | |
| XmlTObjDrivers_ObjectDriver | |
| XmlTObjDrivers_ReferenceDriver | |
| XmlTObjDrivers_XYZDriver | |
| XmlXCAFDrivers | |
| XmlXCAFDrivers_DocumentRetrievalDriver | Retrieval driver of a XS document |
| XmlXCAFDrivers_DocumentStorageDriver | Storage driver of a XS document |
| XSAlgo | |
| XSAlgo_AlgoContainer | |
| XSAlgo_ToolContainer | Returns tools used by AlgoContainer |
| XSControl | This package provides complements to IFSelect & Co for control of a session |
| XSControl_ConnectedShapes | From a TopoDS_Shape, or from the entity which has produced it, searches for the shapes, and the entities which have produced them in last transfer, which are adjacent to it by VERTICES |
| XSControl_Controller | This class allows a general X-STEP engine to run generic functions on any interface norm, in the same way. It includes the transfer operations. I.e. it gathers the already available general modules, the engine has just to know it |
| XSControl_FuncShape | Defines additionnal commands for XSControl to : |
| XSControl_Functions | Functions from XSControl gives access to actions which can be commanded with the resources provided by XSControl: especially Controller and Transfer |
| XSControl_Reader | A groundwork to convert a shape to data which complies with a particular norm. This data can be that of a whole model or that of a specific list of entities in the model. You specify the list using a single selection or a combination of selections. A selection is an operator which computes a list of entities from a list given in input. To specify the input, you can use: |
| XSControl_SelectForTransfer | This selection selects the entities which are recognised for transfer by an Actor for Read : current one or another one |
| XSControl_SignTransferStatus | This Signatures gives the Transfer Status of an entity, as recorded in a TransferProcess. It can be : |
| XSControl_TransferReader | A TransferReader performs, manages, handles results of, transfers done when reading a file (i.e. from entities of an InterfaceModel, to objects for Imagine) |
| XSControl_TransferWriter | TransferWriter gives help to control transfer to write a file after having converted data from Cascade/Imagine |
| XSControl_Utils | This class provides various useful utility routines, to facilitate handling of most common data structures : transients (type, type name ...), strings (ascii or extended, pointed or handled or ...), shapes (reading, writing, testing ...), sequences & arrays (of strings, of transients, of shapes ...), .. |
| XSControl_Vars | Defines a receptacle for externally defined variables, each one has a name |
| XSControl_WorkSession | This WorkSession completes the basic one, by adding : |
| XSControl_Writer | This class gives a simple way to create then write a Model compliant to a given norm, from a Shape The model can then be edited by tools by other appropriate tools |
| XSDRAW | Basic package to work functions of X-STEP (IFSelect & Co) under control of DRAW |
| XSDRAW_Functions | Defines additionnal commands for XSDRAW to : |
| XSDRAW_Vars | Vars for DRAW session (i.e. DBRep and DrawTrSurf) |
| XSDRAWIGES | XSDRAW for IGES : commands IGESSelect, Controller, transfer |
| XSDRAWSTEP | XSDRAW for STEP AP214 and AP203 |
| XSDRAWSTLVRML | |
| XSDRAWSTLVRML_CoordsMap | |
| XSDRAWSTLVRML_DataMapIteratorOfCoordsMap | |
| XSDRAWSTLVRML_DataMapIteratorOfElemNodesMap | |
| XSDRAWSTLVRML_DataMapNodeOfCoordsMap | |
| XSDRAWSTLVRML_DataMapNodeOfElemNodesMap | |
| XSDRAWSTLVRML_DataSource | The sample DataSource for working with STLMesh_Mesh |
| XSDRAWSTLVRML_DataSource3D | The sample DataSource3D for working with STLMesh_Mesh |
| XSDRAWSTLVRML_DrawableMesh | |
| XSDRAWSTLVRML_ElemNodesMap | |
 Xw_Window | This class defines XLib window intended for creation of OpenGL context |
