Describes a circle in the plane (2D space). A circle is defined by its radius and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where the origin is the center of the circle. The coordinate system is the local coordinate system of the circle. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the circle, determining the direction in which the parameter increases along the circle. The Geom2d_Circle circle is parameterized by an angle: P(U) = O + R*Cos(U)*XDir + R*Sin(U)*YDir where: More...

#include <Geom2d_Circle.hxx>

Inheritance diagram for Geom2d_Circle:

[legend]

Public Member Functions
	Geom2d_Circle (const gp_Circ2d &C)
	Constructs a circle by conversion of the gp_Circ2d circle C. More...

	Geom2d_Circle (const gp_Ax2d &A, const Standard_Real Radius, const Standard_Boolean Sense=Standard_True)
	Constructs a circle of radius Radius, whose center is the origin of axis A; A is the "X Axis" of the local coordinate system of the circle; this coordinate system is direct if Sense is true (default value) or indirect if Sense is false. Note: It is possible to create a circle where Radius is equal to 0.0. Exceptions Standard_ConstructionError if Radius is negative. More...

	Geom2d_Circle (const gp_Ax22d &A, const Standard_Real Radius)
	Constructs a circle of radius Radius, where the coordinate system A locates the circle and defines its orientation in the plane such that: More...

void	SetCirc2d (const gp_Circ2d &C)
	Converts the gp_Circ2d circle C into this circle. More...

void	SetRadius (const Standard_Real R)

gp_Circ2d	Circ2d () const
	Returns the non persistent circle from gp with the same geometric properties as <me>. More...

Standard_Real	Radius () const
	Returns the radius of this circle. More...

Standard_Real	ReversedParameter (const Standard_Real U) const
	Computes the parameter on the reversed circle for the point of parameter U on this circle. For a circle, the returned value is: 2.*Pi - U. More...

Standard_Real	Eccentricity () const
	Returns 0., which is the eccentricity of any circle. More...

Standard_Real	FirstParameter () const
	Returns 0.0. More...

Standard_Real	LastParameter () const
	Returns 2*PI. More...

Standard_Boolean	IsClosed () const
	returns True. More...

Standard_Boolean	IsPeriodic () const
	returns True. The period of a circle is 2.*Pi. More...

void	D0 (const Standard_Real U, gp_Pnt2d &P) const
	Returns in P the point of parameter U. P = C + R * Cos (U) * XDir + R * Sin (U) * YDir where C is the center of the circle , XDir the XDirection and YDir the YDirection of the circle's local coordinate system. More...

void	D1 (const Standard_Real U, gp_Pnt2d &P, gp_Vec2d &V1) const
	Returns the point P of parameter U and the first derivative V1. More...

void	D2 (const Standard_Real U, gp_Pnt2d &P, gp_Vec2d &V1, gp_Vec2d &V2) const
	Returns the point P of parameter U, the first and second derivatives V1 and V2. More...

void	D3 (const Standard_Real U, gp_Pnt2d &P, gp_Vec2d &V1, gp_Vec2d &V2, gp_Vec2d &V3) const
	Returns the point P of parameter u, the first second and third derivatives V1 V2 and V3. More...

gp_Vec2d	DN (const Standard_Real U, const Standard_Integer N) const
	For the point of parameter U of this circle, computes the vector corresponding to the Nth derivative. Exceptions: Standard_RangeError if N is less than 1. More...

void	Transform (const gp_Trsf2d &T)
	Applies the transformation T to this circle. More...

Handle< Geom2d_Geometry >	Copy () const
	Creates a new object which is a copy of this circle. More...

Public Member Functions inherited from Geom2d_Conic
void	SetAxis (const gp_Ax22d &A)
	Modifies this conic, redefining its local coordinate system partially, by assigning P as its origin. More...

void	SetXAxis (const gp_Ax2d &A)

void	SetYAxis (const gp_Ax2d &A)
	Assigns the origin and unit vector of axis A to the origin of the local coordinate system of this conic and either: More...

void	SetLocation (const gp_Pnt2d &P)
	Modifies this conic, redefining its local coordinate system fully, by assigning A as this coordinate system. More...

gp_Ax2d	XAxis () const
	Returns the "XAxis" of the conic. This axis defines the origin of parametrization of the conic. This axis and the "Yaxis" define the local coordinate system of the conic. -C++: return const&. More...

gp_Ax2d	YAxis () const
	Returns the "YAxis" of the conic. The "YAxis" is perpendicular to the "Xaxis". More...

gp_Pnt2d	Location () const
	Returns the location point of the conic. For the circle, the ellipse and the hyperbola it is the center of the conic. For the parabola it is the vertex of the parabola. More...

const gp_Ax22d &	Position () const
	Returns the local coordinates system of the conic. More...

void	Reverse ()
	Reverses the direction of parameterization of <me>. The local coordinate system of the conic is modified. More...

GeomAbs_Shape	Continuity () const
	Returns GeomAbs_CN which is the global continuity of any conic. More...

Standard_Boolean	IsCN (const Standard_Integer N) const
	Returns True, the order of continuity of a conic is infinite. More...

Public Member Functions inherited from Geom2d_Curve
virtual Standard_Real	TransformedParameter (const Standard_Real U, const gp_Trsf2d &T) const
	Computes the parameter on the curve transformed by T for the point of parameter U on this curve. Note: this function generally returns U but it can be redefined (for example, on a line). More...

virtual Standard_Real	ParametricTransformation (const gp_Trsf2d &T) const
	Returns the coefficient required to compute the parametric transformation of this curve when transformation T is applied. This coefficient is the ratio between the parameter of a point on this curve and the parameter of the transformed point on the new curve transformed by T. Note: this function generally returns 1. but it can be redefined (for example, on a line). More...

Handle< Geom2d_Curve >	Reversed () const
	Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: More...

virtual Standard_Real	Period () const
	Returns thne period of this curve. raises if the curve is not periodic. More...

gp_Pnt2d	Value (const Standard_Real U) const
	Computes the point of parameter U on <me>. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. More...

Public Member Functions inherited from Geom2d_Geometry
void	Mirror (const gp_Pnt2d &P)
	Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. More...

void	Mirror (const gp_Ax2d &A)
	Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...

void	Rotate (const gp_Pnt2d &P, const Standard_Real Ang)
	Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. More...

void	Scale (const gp_Pnt2d &P, const Standard_Real S)
	Scales a Geometry. S is the scaling value. More...

void	Translate (const gp_Vec2d &V)
	Translates a Geometry. V is the vector of the tanslation. More...

void	Translate (const gp_Pnt2d &P1, const gp_Pnt2d &P2)
	Translates a Geometry from the point P1 to the point P2. More...

Handle< Geom2d_Geometry >	Mirrored (const gp_Pnt2d &P) const

Handle< Geom2d_Geometry >	Mirrored (const gp_Ax2d &A) const

Handle< Geom2d_Geometry >	Rotated (const gp_Pnt2d &P, const Standard_Real Ang) const

Handle< Geom2d_Geometry >	Scaled (const gp_Pnt2d &P, const Standard_Real S) const

Handle< Geom2d_Geometry >	Transformed (const gp_Trsf2d &T) const

Handle< Geom2d_Geometry >	Translated (const gp_Vec2d &V) const

Handle< Geom2d_Geometry >	Translated (const gp_Pnt2d &P1, const gp_Pnt2d &P2) const

Public Member Functions inherited from MMgt_TShared
virtual void	Delete () const
	Memory deallocator for transient classes. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual const Handle_Standard_Type &	DynamicType () const
	Returns a type information object about this object. More...

Standard_Boolean	IsInstance (const Handle_Standard_Type &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const Handle_Standard_Type &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

virtual Handle_Standard_Transient	This () const
	Returns a Handle which references this object. Must never be called to objects created in stack. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

Additional Inherited Members
Protected Attributes inherited from Geom2d_Conic
gp_Ax22d	pos

Detailed Description

Describes a circle in the plane (2D space). A circle is defined by its radius and, as with any conic curve, is positioned in the plane with a coordinate system (gp_Ax22d object) where the origin is the center of the circle. The coordinate system is the local coordinate system of the circle. The orientation (direct or indirect) of the local coordinate system gives an explicit orientation to the circle, determining the direction in which the parameter increases along the circle. The Geom2d_Circle circle is parameterized by an angle: P(U) = O + R*Cos(U)*XDir + R*Sin(U)*YDir where:

P is the point of parameter U,
O, XDir and YDir are respectively the origin, "X Direction" and "Y Direction" of its local coordinate system,
R is the radius of the circle. The "X Axis" of the local coordinate system therefore defines the origin of the parameter of the circle. The parameter is the angle with this "X Direction". A circle is a closed and periodic curve. The period is 2.*Pi and the parameter range is [ 0,2.*Pi [. See Also GCE2d_MakeCircle which provides functions for more complex circle constructions gp_Ax22d and gp_Circ2d for an equivalent, non-parameterized data structure.

Constructor & Destructor Documentation

Geom2d_Circle::Geom2d_Circle ( const gp_Circ2d & C )

Constructs a circle by conversion of the gp_Circ2d circle C.

Geom2d_Circle::Geom2d_Circle	(	const gp_Ax2d &	A,
		const Standard_Real	Radius,
		const Standard_Boolean	Sense = `Standard_True`
	)

Constructs a circle of radius Radius, whose center is the origin of axis A; A is the "X Axis" of the local coordinate system of the circle; this coordinate system is direct if Sense is true (default value) or indirect if Sense is false. Note: It is possible to create a circle where Radius is equal to 0.0. Exceptions Standard_ConstructionError if Radius is negative.

Geom2d_Circle::Geom2d_Circle	(	const gp_Ax22d &	A,
		const Standard_Real	Radius
	)

Constructs a circle of radius Radius, where the coordinate system A locates the circle and defines its orientation in the plane such that:

the center of the circle is the origin of A,
the orientation (direct or indirect) of A gives the orientation of the circle.

Member Function Documentation

gp_Circ2d Geom2d_Circle::Circ2d ( ) const

Returns the non persistent circle from gp with the same geometric properties as <me>.

Handle< Geom2d_Geometry > Geom2d_Circle::Copy ( ) const

virtual

Creates a new object which is a copy of this circle.

Implements Geom2d_Geometry.

void Geom2d_Circle::D0	(	const Standard_Real	U,
		gp_Pnt2d &	P
	)		const

virtual

Returns in P the point of parameter U. P = C + R * Cos (U) * XDir + R * Sin (U) * YDir where C is the center of the circle , XDir the XDirection and YDir the YDirection of the circle's local coordinate system.

Implements Geom2d_Curve.

void Geom2d_Circle::D1	(	const Standard_Real	U,
		gp_Pnt2d &	P,
		gp_Vec2d &	V1
	)		const

virtual

Returns the point P of parameter U and the first derivative V1.

Implements Geom2d_Curve.

void Geom2d_Circle::D2	(	const Standard_Real	U,
		gp_Pnt2d &	P,
		gp_Vec2d &	V1,
		gp_Vec2d &	V2
	)		const

virtual

Returns the point P of parameter U, the first and second derivatives V1 and V2.

Implements Geom2d_Curve.

void Geom2d_Circle::D3	(	const Standard_Real	U,
		gp_Pnt2d &	P,
		gp_Vec2d &	V1,
		gp_Vec2d &	V2,
		gp_Vec2d &	V3
	)		const

virtual

Returns the point P of parameter u, the first second and third derivatives V1 V2 and V3.

Implements Geom2d_Curve.

gp_Vec2d Geom2d_Circle::DN	(	const Standard_Real	U,
		const Standard_Integer	N
	)		const

virtual

For the point of parameter U of this circle, computes the vector corresponding to the Nth derivative. Exceptions: Standard_RangeError if N is less than 1.

Implements Geom2d_Curve.

Standard_Real Geom2d_Circle::Eccentricity ( ) const

virtual

Returns 0., which is the eccentricity of any circle.

Implements Geom2d_Conic.

Standard_Real Geom2d_Circle::FirstParameter ( ) const

virtual

Returns 0.0.

Implements Geom2d_Curve.

Standard_Boolean Geom2d_Circle::IsClosed ( ) const

virtual

returns True.