A SessionPilot is intended to make easier the use of a WorkSession. It receives commands, under alphanumeric form, then calls a library of Activators to interprete and run them. More...
#include <IFSelect_SessionPilot.hxx>
Public Member Functions | |
| IFSelect_SessionPilot (const Standard_CString prompt="") | |
| Creates an empty SessionPilot, with a prompt which will be displayed on querying commands. If not precised (""), this prompt is set to "Test-XSTEP>". More... | |
| Handle< IFSelect_WorkSession > | Session () const |
| Returns the WorkSession which is worked on. More... | |
| Handle< IFSelect_WorkLibrary > | Library () const |
| Returns the WorKlibrary (Null if not set). WorkLibrary is used to Read and Write Files, according to the Norm. More... | |
| Standard_Boolean | RecordMode () const |
| Returns the Record Mode for Commands. Default is False. More... | |
| void | SetSession (const Handle< IFSelect_WorkSession > &WS) |
| Sets a WorkSession to be worked on. More... | |
| void | SetLibrary (const Handle< IFSelect_WorkLibrary > &WL) |
| Sets a WorkLibrary. More... | |
| void | SetRecordMode (const Standard_Boolean mode) |
| Changes the RecordMode. More... | |
| void | SetCommandLine (const TCollection_AsciiString &command) |
| Sets the value of the Command Line to be interpreted Also prepares the interpretation (splitting by blanks) More... | |
| const TCollection_AsciiString & | CommandLine () const |
| Returns the Command Line to be interpreted. More... | |
| Standard_CString | CommandPart (const Standard_Integer numarg=0) const |
| Returns the part of the command line which begins at argument <numarg> between 0 and NbWords-1 (by default, all the line) Empty string if out of range. More... | |
| Standard_Integer | NbWords () const |
| Returns the count of words of the Command Line, separated by blanks : 0 if empty, one if a command without args, else it gives the count of args minus one. Warning : limited to 10 (command title + 9 args) More... | |
| const TCollection_AsciiString & | Word (const Standard_Integer num) const |
| Returns a word given its rank in the Command Line. Begins at 0 which is the Command Title, 1 is the 1st arg., etc... More... | |
| Standard_CString | Arg (const Standard_Integer num) const |
| Returns a word given its rank, as a CString. As for Word, begins at 0 (the command name), etc... More... | |
| Standard_Boolean | RemoveWord (const Standard_Integer num) |
| Removes a word given its rank. Returns True if Done, False if <num> is out of range. More... | |
| Standard_Integer | NbCommands () const |
| Returns the count of recorded Commands. More... | |
| const TCollection_AsciiString & | Command (const Standard_Integer num) const |
| Returns a recorded Command, given its rank (from 1) More... | |
| IFSelect_ReturnStatus | RecordItem (const Handle< Standard_Transient > &item) |
| Allows to associate a Transient Value with the last execution as a partial result Returns RetDone if item is not Null, RetFail if item is Null Remark : it is nullified for each Perform. More... | |
| Handle< Standard_Transient > | RecordedItem () const |
| Returns the Transient Object which was recorded with the current Line Command. If none was, returns a Null Handle. More... | |
| void | Clear () |
| Clears the recorded informations (commands, objects) More... | |
| IFSelect_ReturnStatus | ReadScript (const Standard_CString file="") |
| Reads commands from a Script File, named <file>. By default (file = ""), reads from standard input with a prompt Else (reading from a file), the read commands are displayed onto standard output. Allows nested reads. Reading is stopped either by command x or exit, or by reaching end of file Return Value follows the rules of Do : RetEnd for normal end, RetFail if script could not be opened. More... | |
| IFSelect_ReturnStatus | Perform () |
| Executes the Command, itself (for built-in commands, which have priority) or by using the list of Activators. The value returned is : RetVoid if nothing done (void command) RetDone if execution OK, RetEnd if END OF SESSION, RetError if command unknown or incorrect, RetFail if error on execution If execution is OK and RecordMode is set, this Command Line is recorded to the list (see below). More... | |
| IFSelect_ReturnStatus | ExecuteAlias (const TCollection_AsciiString &aliasname) |
| Executes the Commands, except that the command name (word 0) is aliased. The rest of the command line is unchanged If <alias> is empty, Executes with no change. More... | |
| IFSelect_ReturnStatus | Execute (const TCollection_AsciiString &command) |
| Sets the Command then tries to execute it. Return value : same as for Perform. More... | |
| IFSelect_ReturnStatus | ExecuteCounter (const Handle< IFSelect_SignCounter > &counter, const Standard_Integer numword, const IFSelect_PrintCount mode=IFSelect_CountByItem) |
| Executes a Counter in a general way If <numword> is greater than count of command words, it counts all the model. Else it considers the word <numword> as the identifier of a Selection <mode> gives the mode of printing results, default is CountByItem. More... | |
| Standard_Integer | Number (const Standard_CString val) const |
| Interprets a string value as an entity number : if it gives an integer, returns its value else, considers it as ENtityLabel (preferably case sensitive) in case of failure, returns 0. More... | |
| IFSelect_ReturnStatus | Do (const Standard_Integer number, const Handle< IFSelect_SessionPilot > &session) |
| Processes specific commands, which are : x or exit for end of session ? or help for help messages xcommand to control command lines (Record Mode, List, Clear, File Output ...) xsource to execute a command file (no nesting allowed), in case of error, source is stopped and keyword recovers xstep is a simple prefix (useful in a wider environment, to avoid conflicts on command names) xset control commands which create items with names. More... | |
| Standard_CString | Help (const Standard_Integer number) const |
| Help for specific commands (apart from general command help) More... | |
 Public Member Functions inherited from IFSelect_Activator | |
| void | Add (const Standard_Integer number, const Standard_CString command) const |
| Allows a self-definition by an Activator of the Commands it processes, call the class method Adding (mode 0) More... | |
| void | AddSet (const Standard_Integer number, const Standard_CString command) const |
| Same as Add but specifies that this command is candidate for xset (creation of items, xset : named items; mode 1) More... | |
| Standard_CString | Group () const |
| Standard_CString | File () const |
| void | SetForGroup (const Standard_CString group, const Standard_CString file="") |
| Group and SetGroup define a "Group of commands" which correspond to an Activator. Default is "XSTEP" Also a file may be attached. More... | |
| Public Member Functions inherited from MMgt_TShared | |
| virtual void | Delete () const |
| Memory deallocator for transient classes. More... | |
| Public Member Functions inherited from Standard_Transient | |
| Standard_Transient () | |
| Empty constructor. More... | |
| Standard_Transient (const Standard_Transient &) | |
| Copy constructor – does nothing. More... | |
| Standard_Transient & | operator= (const Standard_Transient &) |
| Assignment operator, needed to avoid copying reference counter. More... | |
| virtual | ~Standard_Transient () |
| Destructor must be virtual. More... | |
| virtual const Handle_Standard_Type & | DynamicType () const |
| Returns a type information object about this object. More... | |
| Standard_Boolean | IsInstance (const Handle_Standard_Type &theType) const |
| Returns a true value if this is an instance of Type. More... | |
| Standard_Boolean | IsInstance (const Standard_CString theTypeName) const |
| Returns a true value if this is an instance of TypeName. More... | |
| Standard_Boolean | IsKind (const Handle_Standard_Type &theType) const |
| Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Boolean | IsKind (const Standard_CString theTypeName) const |
| Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| virtual Handle_Standard_Transient | This () const |
| Returns a Handle which references this object. Must never be called to objects created in stack. More... | |
| Standard_Integer | GetRefCount () const |
| Get the reference counter of this object. More... | |
Additional Inherited Members | |
| Static Public Member Functions inherited from IFSelect_Activator | |
| static void | Adding (const Handle< IFSelect_Activator > &actor, const Standard_Integer number, const Standard_CString command, const Standard_Integer mode) |
| Records, in a Dictionary available for all the Activators, the command title an Activator can process, attached with its number, proper for this Activator <mode> allows to distinguish various execution modes 0: default mode; 1 : for xset. More... | |
| static void | Remove (const Standard_CString command) |
| Removes a Command, if it is recorded (else, does nothing) More... | |
| static void | SetAlias (const Standard_CString conf, const Standard_CString command, const Standard_CString aliasname) |
| Records, for a configuration named <conf>, that the command <command> may be aliased by another command <alias> More... | |
| static void | SetCurrentAlias (const Standard_CString conf) |
| Sets <conf> as current configuration for aliases. More... | |
| static TCollection_AsciiString | Alias (const Standard_CString command) |
| Returns, in the current configuration, what alias has been recorded for <command> The returned string is empty if no alias is recorded. More... | |
| static Standard_Boolean | Select (const Standard_CString command, Standard_Integer &number, Handle< IFSelect_Activator > &actor) |
| Selects, for a Command given by its title, an actor with its command number. Returns True if found, False else. More... | |
| static Standard_Integer | Mode (const Standard_CString command) |
| Returns mode recorded for a command. -1 if not found. More... | |
| static Handle < TColStd_HSequenceOfAsciiString > | Commands (const Standard_Integer mode=-1, const Standard_CString command="") |
| Returns, for a root of command title, the list of possible commands. <mode> : -1 (D) for all commands if <commands> is empty -1 + command : about a Group , >= 0 see Adding By default, it returns the whole list of known commands. More... | |
| Protected Member Functions inherited from IFSelect_Activator | |
| IFSelect_Activator () | |
| Sets the default values. More... | |
Detailed Description
A SessionPilot is intended to make easier the use of a WorkSession. It receives commands, under alphanumeric form, then calls a library of Activators to interprete and run them.
Then, WorkSession just records data required to work : Rules for Selection, Dispatch ... ; File Data (InterfaceModel and results of Evaluations and Transfer as required). SessionPilot records and works with alphanumeric commands and their results (under a very simple form). It calls a list of Activators to perform the actions.
A Command can have several forms :
- classic execution, to list, evaluate, or enrich the session
- command which creates a new item (a Selection for instance) such a command should not add it to the session, but make it recorded by the Pilot (method RecordItem). The Pilot will add the item in the session, with no name -> such a command may be called :
- directly, it will add an item with no name
- by command xset, in the following form : xset name command ... calls the command and adds the item to the session under the specified name (if not yet known)
Thus, to a specific Norm or way of working, only Activators change. A specific Initialisation can be done by starting with a specific set of commands.
In addition, SessionPilot is a sub-type of Activator, to recognize some built-in commands : exit/x, help/?, control of command line, and commands xstep xset ... See method Do
At least, empty lines and comment lines (beginning by '#') are skipped (comment lines are display if read from file)
Constructor & Destructor Documentation
| IFSelect_SessionPilot::IFSelect_SessionPilot | ( | const Standard_CString | prompt = "" | ) |
Creates an empty SessionPilot, with a prompt which will be displayed on querying commands. If not precised (""), this prompt is set to "Test-XSTEP>".
Member Function Documentation
| Standard_CString IFSelect_SessionPilot::Arg | ( | const Standard_Integer | num | ) | const |
Returns a word given its rank, as a CString. As for Word, begins at 0 (the command name), etc...
| void IFSelect_SessionPilot::Clear | ( | ) |
Clears the recorded informations (commands, objects)
| const TCollection_AsciiString& IFSelect_SessionPilot::Command | ( | const Standard_Integer | num | ) | const |
Returns a recorded Command, given its rank (from 1)
| const TCollection_AsciiString& IFSelect_SessionPilot::CommandLine | ( | ) | const |
Returns the Command Line to be interpreted.
| Standard_CString IFSelect_SessionPilot::CommandPart | ( | const Standard_Integer | numarg = 0 | ) | const |
Returns the part of the command line which begins at argument <numarg> between 0 and NbWords-1 (by default, all the line) Empty string if out of range.
|
virtual |
Processes specific commands, which are : x or exit for end of session ? or help for help messages xcommand to control command lines (Record Mode, List, Clear, File Output ...) xsource to execute a command file (no nesting allowed), in case of error, source is stopped and keyword recovers xstep is a simple prefix (useful in a wider environment, to avoid conflicts on command names) xset control commands which create items with names.
Implements IFSelect_Activator.
| IFSelect_ReturnStatus IFSelect_SessionPilot::Execute | ( | const TCollection_AsciiString & | command | ) |
Sets the Command then tries to execute it. Return value : same as for Perform.
| IFSelect_ReturnStatus IFSelect_SessionPilot::ExecuteAlias | ( | const TCollection_AsciiString & | aliasname | ) |
Executes the Commands, except that the command name (word 0) is aliased. The rest of the command line is unchanged If <alias> is empty, Executes with no change.
Error status is returned if the alias is unknown as command
| IFSelect_ReturnStatus IFSelect_SessionPilot::ExecuteCounter | ( | const Handle< IFSelect_SignCounter > & | counter, |
| const Standard_Integer | numword, | ||
| const IFSelect_PrintCount | mode = IFSelect_CountByItem |
||
| ) |
Executes a Counter in a general way If <numword> is greater than count of command words, it counts all the model. Else it considers the word <numword> as the identifier of a Selection <mode> gives the mode of printing results, default is CountByItem.
|
virtual |
Help for specific commands (apart from general command help)
Implements IFSelect_Activator.
| Handle< IFSelect_WorkLibrary > IFSelect_SessionPilot::Library | ( | ) | const |
Returns the WorKlibrary (Null if not set). WorkLibrary is used to Read and Write Files, according to the Norm.
| Standard_Integer IFSelect_SessionPilot::NbCommands | ( | ) | const |
Returns the count of recorded Commands.
| Standard_Integer IFSelect_SessionPilot::NbWords | ( | ) | const |
Returns the count of words of the Command Line, separated by blanks : 0 if empty, one if a command without args, else it gives the count of args minus one. Warning : limited to 10 (command title + 9 args)
| Standard_Integer IFSelect_SessionPilot::Number | ( | const Standard_CString | val | ) | const |
Interprets a string value as an entity number : if it gives an integer, returns its value else, considers it as ENtityLabel (preferably case sensitive) in case of failure, returns 0.
| IFSelect_ReturnStatus IFSelect_SessionPilot::Perform | ( | ) |
Executes the Command, itself (for built-in commands, which have priority) or by using the list of Activators. The value returned is : RetVoid if nothing done (void command) RetDone if execution OK, RetEnd if END OF SESSION, RetError if command unknown or incorrect, RetFail if error on execution If execution is OK and RecordMode is set, this Command Line is recorded to the list (see below).
| IFSelect_ReturnStatus IFSelect_SessionPilot::ReadScript | ( | const Standard_CString | file = "" | ) |
Reads commands from a Script File, named <file>. By default (file = ""), reads from standard input with a prompt Else (reading from a file), the read commands are displayed onto standard output. Allows nested reads. Reading is stopped either by command x or exit, or by reaching end of file Return Value follows the rules of Do : RetEnd for normal end, RetFail if script could not be opened.
| Handle< Standard_Transient > IFSelect_SessionPilot::RecordedItem | ( | ) | const |
Returns the Transient Object which was recorded with the current Line Command. If none was, returns a Null Handle.
| IFSelect_ReturnStatus IFSelect_SessionPilot::RecordItem | ( | const Handle< Standard_Transient > & | item | ) |
Allows to associate a Transient Value with the last execution as a partial result Returns RetDone if item is not Null, RetFail if item is Null Remark : it is nullified for each Perform.
| Standard_Boolean IFSelect_SessionPilot::RecordMode | ( | ) | const |
Returns the Record Mode for Commands. Default is False.
| Standard_Boolean IFSelect_SessionPilot::RemoveWord | ( | const Standard_Integer | num | ) |
Removes a word given its rank. Returns True if Done, False if <num> is out of range.
| Handle< IFSelect_WorkSession > IFSelect_SessionPilot::Session | ( | ) | const |
Returns the WorkSession which is worked on.
| void IFSelect_SessionPilot::SetCommandLine | ( | const TCollection_AsciiString & | command | ) |
Sets the value of the Command Line to be interpreted Also prepares the interpretation (splitting by blanks)
| void IFSelect_SessionPilot::SetLibrary | ( | const Handle< IFSelect_WorkLibrary > & | WL | ) |
Sets a WorkLibrary.
| void IFSelect_SessionPilot::SetRecordMode | ( | const Standard_Boolean | mode | ) |
Changes the RecordMode.
| void IFSelect_SessionPilot::SetSession | ( | const Handle< IFSelect_WorkSession > & | WS | ) |
Sets a WorkSession to be worked on.
| const TCollection_AsciiString& IFSelect_SessionPilot::Word | ( | const Standard_Integer | num | ) | const |
Returns a word given its rank in the Command Line. Begins at 0 which is the Command Title, 1 is the 1st arg., etc...
The documentation for this class was generated from the following file:
