Describes a unit vector in 3D space. This unit vector is also called "Direction". See Also gce_MakeDir which provides functions for more complex unit vector constructions Geom_Direction which provides additional functions for constructing unit vectors and works, in particular, with the parametric equations of unit vectors. More...

#include <gp_Dir.hxx>

Public Member Functions
	gp_Dir ()
	Creates a direction corresponding to X axis. More...

	gp_Dir (const gp_Vec &V)
	Normalizes the vector V and creates a direction. Raises ConstructionError if V.Magnitude() <= Resolution. More...

	gp_Dir (const gp_XYZ &Coord)
	Creates a direction from a triplet of coordinates. Raises ConstructionError if Coord.Modulus() <= Resolution from gp. More...

	gp_Dir (const Standard_Real Xv, const Standard_Real Yv, const Standard_Real Zv)
	Creates a direction with its 3 cartesian coordinates. Raises ConstructionError if Sqrt(XvXv + YvYv + ZvZv) <= Resolution Modification of the direction's coordinates If Sqrt (XX + YY + ZZ) <= Resolution from gp where X, Y ,Z are the new coordinates it is not possible to construct the direction and the method raises the exception ConstructionError. More...

void	SetCoord (const Standard_Integer Index, const Standard_Real Xi)
	For this unit vector, assigns the value Xi to: More...

void	SetCoord (const Standard_Real Xv, const Standard_Real Yv, const Standard_Real Zv)
	For this unit vector, assigns the values Xv, Yv and Zv to its three coordinates. Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. More...

void	SetX (const Standard_Real X)
	Assigns the given value to the X coordinate of this unit vector. More...

void	SetY (const Standard_Real Y)
	Assigns the given value to the Y coordinate of this unit vector. More...

void	SetZ (const Standard_Real Z)
	Assigns the given value to the Z coordinate of this unit vector. More...

void	SetXYZ (const gp_XYZ &Coord)
	Assigns the three coordinates of Coord to this unit vector. More...

Standard_Real	Coord (const Standard_Integer Index) const
	Returns the coordinate of range Index : Index = 1 => X is returned Index = 2 => Y is returned Index = 3 => Z is returned Exceptions Standard_OutOfRange if Index is not 1, 2, or 3. More...

void	Coord (Standard_Real &Xv, Standard_Real &Yv, Standard_Real &Zv) const
	Returns for the unit vector its three coordinates Xv, Yv, and Zv. More...

Standard_Real	X () const
	Returns the X coordinate for a unit vector. More...

Standard_Real	Y () const
	Returns the Y coordinate for a unit vector. More...

Standard_Real	Z () const
	Returns the Z coordinate for a unit vector. More...

const gp_XYZ &	XYZ () const
	for this unit vector, returns its three coordinates as a number triplea. More...

Standard_Boolean	IsEqual (const gp_Dir &Other, const Standard_Real AngularTolerance) const
	Returns True if the angle between the two directions is lower or equal to AngularTolerance. More...

Standard_Boolean	IsNormal (const gp_Dir &Other, const Standard_Real AngularTolerance) const
	Returns True if the angle between this unit vector and the unit vector Other is equal to Pi/2 (normal). More...

Standard_Boolean	IsOpposite (const gp_Dir &Other, const Standard_Real AngularTolerance) const
	Returns True if the angle between this unit vector and the unit vector Other is equal to Pi (opposite). More...

Standard_Boolean	IsParallel (const gp_Dir &Other, const Standard_Real AngularTolerance) const
	Returns true if the angle between this unit vector and the unit vector Other is equal to 0 or to Pi. Note: the tolerance criterion is given by AngularTolerance. More...

Standard_Real	Angle (const gp_Dir &Other) const
	Computes the angular value in radians between <me> and <Other>. This value is always positive in 3D space. Returns the angle in the range [0, PI]. More...

Standard_Real	AngleWithRef (const gp_Dir &Other, const gp_Dir &VRef) const
	Computes the angular value between <me> and <Other>. <VRef> is the direction of reference normal to <me> and <Other> and its orientation gives the positive sense of rotation. If the cross product <me> ^ <Other> has the same orientation as <VRef> the angular value is positive else negative. Returns the angular value in the range -PI and PI (in radians). Raises DomainError if <me> and <Other> are not parallel this exception is raised when <VRef> is in the same plane as <me> and <Other> The tolerance criterion is Resolution from package gp. More...

void	Cross (const gp_Dir &Right)
	Computes the cross product between two directions Raises the exception ConstructionError if the two directions are parallel because the computed vector cannot be normalized to create a direction. More...

void	operator^= (const gp_Dir &Right)

gp_Dir	Crossed (const gp_Dir &Right) const
	Computes the triple vector product. <me> ^ (V1 ^ V2) Raises the exception ConstructionError if V1 and V2 are parallel or <me> and (V1^V2) are parallel because the computed vector can't be normalized to create a direction. More...

gp_Dir	operator^ (const gp_Dir &Right) const

void	CrossCross (const gp_Dir &V1, const gp_Dir &V2)

gp_Dir	CrossCrossed (const gp_Dir &V1, const gp_Dir &V2) const
	Computes the double vector product this ^ (V1 ^ V2). More...

Standard_Real	Dot (const gp_Dir &Other) const
	Computes the scalar product. More...

Standard_Real	operator* (const gp_Dir &Other) const

Standard_Real	DotCross (const gp_Dir &V1, const gp_Dir &V2) const
	Computes the triple scalar product <me> * (V1 ^ V2). Warnings : The computed vector V1' = V1 ^ V2 is not normalized to create a unitary vector. So this method never raises an exception even if V1 and V2 are parallel. More...

void	Reverse ()

gp_Dir	Reversed () const
	Reverses the orientation of a direction geometric transformations Performs the symmetrical transformation of a direction with respect to the direction V which is the center of the symmetry.]. More...

gp_Dir	operator- () const

void	Mirror (const gp_Dir &V)

gp_Dir	Mirrored (const gp_Dir &V) const
	Performs the symmetrical transformation of a direction with respect to the direction V which is the center of the symmetry. More...

void	Mirror (const gp_Ax1 &A1)

gp_Dir	Mirrored (const gp_Ax1 &A1) const
	Performs the symmetrical transformation of a direction with respect to an axis placement which is the axis of the symmetry. More...

void	Mirror (const gp_Ax2 &A2)

gp_Dir	Mirrored (const gp_Ax2 &A2) const
	Performs the symmetrical transformation of a direction with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More...

void	Rotate (const gp_Ax1 &A1, const Standard_Real Ang)

gp_Dir	Rotated (const gp_Ax1 &A1, const Standard_Real Ang) const
	Rotates a direction. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More...

void	Transform (const gp_Trsf &T)

gp_Dir	Transformed (const gp_Trsf &T) const
	Transforms a direction with a "Trsf" from gp. Warnings : If the scale factor of the "Trsf" T is negative then the direction <me> is reversed. More...

const gp_XYZ &	_CSFDB_Getgp_Dircoord () const

Detailed Description

Describes a unit vector in 3D space. This unit vector is also called "Direction". See Also gce_MakeDir which provides functions for more complex unit vector constructions Geom_Direction which provides additional functions for constructing unit vectors and works, in particular, with the parametric equations of unit vectors.

Constructor & Destructor Documentation

gp_Dir::gp_Dir ( )

Creates a direction corresponding to X axis.

gp_Dir::gp_Dir ( const gp_Vec & V )

Normalizes the vector V and creates a direction. Raises ConstructionError if V.Magnitude() <= Resolution.

gp_Dir::gp_Dir ( const gp_XYZ & Coord )

Creates a direction from a triplet of coordinates. Raises ConstructionError if Coord.Modulus() <= Resolution from gp.

gp_Dir::gp_Dir	(	const Standard_Real	Xv,
		const Standard_Real	Yv,
		const Standard_Real	Zv
	)

Creates a direction with its 3 cartesian coordinates. Raises ConstructionError if Sqrt(Xv*Xv + Yv*Yv + Zv*Zv) <= Resolution Modification of the direction's coordinates If Sqrt (X*X + Y*Y + Z*Z) <= Resolution from gp where X, Y ,Z are the new coordinates it is not possible to construct the direction and the method raises the exception ConstructionError.

Member Function Documentation

const gp_XYZ& gp_Dir::_CSFDB_Getgp_Dircoord ( ) const

inline

Standard_Real gp_Dir::Angle ( const gp_Dir & Other ) const

Computes the angular value in radians between <me> and <Other>. This value is always positive in 3D space. Returns the angle in the range [0, PI].

Standard_Real gp_Dir::AngleWithRef	(	const gp_Dir &	Other,
		const gp_Dir &	VRef
	)		const

Computes the angular value between <me> and <Other>. <VRef> is the direction of reference normal to <me> and <Other> and its orientation gives the positive sense of rotation. If the cross product <me> ^ <Other> has the same orientation as <VRef> the angular value is positive else negative. Returns the angular value in the range -PI and PI (in radians). Raises DomainError if <me> and <Other> are not parallel this exception is raised when <VRef> is in the same plane as <me> and <Other> The tolerance criterion is Resolution from package gp.

Standard_Real gp_Dir::Coord ( const Standard_Integer Index ) const

Returns the coordinate of range Index : Index = 1 => X is returned Index = 2 => Y is returned Index = 3 => Z is returned Exceptions Standard_OutOfRange if Index is not 1, 2, or 3.

void gp_Dir::Coord	(	Standard_Real &	Xv,
		Standard_Real &	Yv,
		Standard_Real &	Zv
	)		const

Returns for the unit vector its three coordinates Xv, Yv, and Zv.

void gp_Dir::Cross ( const gp_Dir & Right )

Computes the cross product between two directions Raises the exception ConstructionError if the two directions are parallel because the computed vector cannot be normalized to create a direction.

void gp_Dir::CrossCross	(	const gp_Dir &	V1,
		const gp_Dir &	V2
	)

gp_Dir gp_Dir::CrossCrossed	(	const gp_Dir &	V1,
		const gp_Dir &	V2
	)		const

Computes the double vector product this ^ (V1 ^ V2).

CrossCrossed creates a new unit vector. Exceptions Standard_ConstructionError if:
V1 and V2 are parallel, or
this unit vector and (V1 ^ V2) are parallel. This is because, in these conditions, the computed vector is null and cannot be normalized.

gp_Dir gp_Dir::Crossed ( const gp_Dir & Right ) const

Computes the triple vector product. <me> ^ (V1 ^ V2) Raises the exception ConstructionError if V1 and V2 are parallel or <me> and (V1^V2) are parallel because the computed vector can't be normalized to create a direction.

Standard_Real gp_Dir::Dot ( const gp_Dir & Other ) const

Computes the scalar product.

Standard_Real gp_Dir::DotCross	(	const gp_Dir &	V1,
		const gp_Dir &	V2
	)		const

Computes the triple scalar product <me> * (V1 ^ V2). Warnings : The computed vector V1' = V1 ^ V2 is not normalized to create a unitary vector. So this method never raises an exception even if V1 and V2 are parallel.

Standard_Boolean gp_Dir::IsEqual	(	const gp_Dir &	Other,
		const Standard_Real	AngularTolerance
	)		const

Returns True if the angle between the two directions is lower or equal to AngularTolerance.

Standard_Boolean gp_Dir::IsNormal	(	const gp_Dir &	Other,
		const Standard_Real	AngularTolerance
	)		const

Returns True if the angle between this unit vector and the unit vector Other is equal to Pi/2 (normal).

Standard_Boolean gp_Dir::IsOpposite	(	const gp_Dir &	Other,
		const Standard_Real	AngularTolerance
	)		const

Returns True if the angle between this unit vector and the unit vector Other is equal to Pi (opposite).

Standard_Boolean gp_Dir::IsParallel	(	const gp_Dir &	Other,
		const Standard_Real	AngularTolerance
	)		const

Returns true if the angle between this unit vector and the unit vector Other is equal to 0 or to Pi. Note: the tolerance criterion is given by AngularTolerance.

void gp_Dir::Mirror ( const gp_Dir & V )

void gp_Dir::Mirror ( const gp_Ax1 & A1 )

void gp_Dir::Mirror ( const gp_Ax2 & A2 )

gp_Dir gp_Dir::Mirrored ( const gp_Dir & V ) const

Performs the symmetrical transformation of a direction with respect to the direction V which is the center of the symmetry.

gp_Dir gp_Dir::Mirrored ( const gp_Ax1 & A1 ) const

Performs the symmetrical transformation of a direction with respect to an axis placement which is the axis of the symmetry.

gp_Dir gp_Dir::Mirrored ( const gp_Ax2 & A2 ) const

Performs the symmetrical transformation of a direction with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection).

Standard_Real gp_Dir::operator* ( const gp_Dir & Other ) const

inline

gp_Dir gp_Dir::operator- ( ) const

inline

gp_Dir gp_Dir::operator^ ( const gp_Dir & Right ) const

inline

void gp_Dir::operator^= ( const gp_Dir & Right )

inline

void gp_Dir::Reverse ( )

gp_Dir gp_Dir::Reversed ( ) const

Reverses the orientation of a direction geometric transformations Performs the symmetrical transformation of a direction with respect to the direction V which is the center of the symmetry.].

void gp_Dir::Rotate	(	const gp_Ax1 &	A1,
		const Standard_Real	Ang
	)

gp_Dir gp_Dir::Rotated	(	const gp_Ax1 &	A1,
		const Standard_Real	Ang
	)		const

Rotates a direction. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians.

void gp_Dir::SetCoord	(	const Standard_Integer	Index,
		const Standard_Real	Xi
	)

For this unit vector, assigns the value Xi to:

the X coordinate if Index is 1, or
the Y coordinate if Index is 2, or
the Z coordinate if Index is 3, and then normalizes it. Warning Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly. Exceptions Standard_OutOfRange if Index is not 1, 2, or 3. Standard_ConstructionError if either of the following is less than or equal to gp::Resolution():
Sqrt(Xv*Xv + Yv*Yv + Zv*Zv), or
the modulus of the number triple formed by the new value Xi and the two other coordinates of this vector that were not directly modified.

void gp_Dir::SetCoord	(	const Standard_Real	Xv,
		const Standard_Real	Yv,
		const Standard_Real	Zv
	)

For this unit vector, assigns the values Xv, Yv and Zv to its three coordinates. Remember that all the coordinates of a unit vector are implicitly modified when any single one is changed directly.

void gp_Dir::SetX ( const Standard_Real X )

Assigns the given value to the X coordinate of this unit vector.

void gp_Dir::SetXYZ ( const gp_XYZ & Coord )

Assigns the three coordinates of Coord to this unit vector.

void gp_Dir::SetY ( const Standard_Real Y )

Assigns the given value to the Y coordinate of this unit vector.

void gp_Dir::SetZ ( const Standard_Real Z )

Assigns the given value to the Z coordinate of this unit vector.

void gp_Dir::Transform ( const gp_Trsf & T )

gp_Dir gp_Dir::Transformed ( const gp_Trsf & T ) const

Transforms a direction with a "Trsf" from gp. Warnings : If the scale factor of the "Trsf" T is negative then the direction <me> is reversed.

Standard_Real gp_Dir::X ( ) const

Returns the X coordinate for a unit vector.

const gp_XYZ& gp_Dir::XYZ ( ) const

for this unit vector, returns its three coordinates as a number triplea.

Standard_Real gp_Dir::Y ( ) const

Returns the Y coordinate for a unit vector.

Standard_Real gp_Dir::Z ( ) const

Returns the Z coordinate for a unit vector.

The documentation for this class was generated from the following file:

gp_Dir.hxx

gp_Dir Class Reference

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation