This operator allows to perform various fixes on face and its wires: fixes provided by ShapeFix_Wire, fixing orientation of wires, addition of natural bounds, fixing of missing seam edge, and detection and removal of null-area wires. More...

#include <ShapeFix_Face.hxx>

Inheritance diagram for ShapeFix_Face:

[legend]

Public Member Functions
	ShapeFix_Face ()
	Creates an empty tool. More...

	ShapeFix_Face (const TopoDS_Face &face)
	Creates a tool and loads a face. More...

virtual void	ClearModes ()
	Sets all modes to default. More...

void	Init (const TopoDS_Face &face)
	Loads a whole face already created, with its wires, sense and location. More...

void	Init (const Handle< Geom_Surface > &surf, const Standard_Real preci, const Standard_Boolean fwd=Standard_True)
	Starts the creation of the face By default it will be FORWARD, or REVERSED if <fwd> is False. More...

void	Init (const Handle< ShapeAnalysis_Surface > &surf, const Standard_Real preci, const Standard_Boolean fwd=Standard_True)
	Starts the creation of the face By default it will be FORWARD, or REVERSED if <fwd> is False. More...

virtual void	SetMsgRegistrator (const Handle< ShapeExtend_BasicMsgRegistrator > &msgreg)
	Sets message registrator. More...

virtual void	SetPrecision (const Standard_Real preci)
	Sets basic precision value (also to FixWireTool) More...

virtual void	SetMinTolerance (const Standard_Real mintol)
	Sets minimal allowed tolerance (also to FixWireTool) More...

virtual void	SetMaxTolerance (const Standard_Real maxtol)
	Sets maximal allowed tolerance (also to FixWireTool) More...

Standard_Integer &	FixWireMode ()
	Returns (modifiable) the mode for applying fixes of ShapeFix_Wire, by default True. More...

Standard_Integer &	FixOrientationMode ()
	Returns (modifiable) the fix orientation mode, by default True. If True, wires oriented to border limited square. More...

Standard_Integer &	FixAddNaturalBoundMode ()
	Returns (modifiable) the add natural bound mode. If true, natural boundary is added on faces that miss them. Default is False for faces with single wire (they are handled by FixOrientation in that case) and True for others. More...

Standard_Integer &	FixMissingSeamMode ()
	Returns (modifiable) the fix missing seam mode, by default True. If True, tries to insert seam is missed. More...

Standard_Integer &	FixSmallAreaWireMode ()
	Returns (modifiable) the fix small area wire mode, by default False. If True, drops small wires. More...

Standard_Integer &	FixIntersectingWiresMode ()
	Returns (modifiable) the fix intersecting wires mode by default True. More...

Standard_Integer &	FixLoopWiresMode ()
	Returns (modifiable) the fix loop wires mode by default True. More...

Standard_Integer &	FixSplitFaceMode ()
	Returns (modifiable) the fix split face mode by default True. More...

Standard_Integer &	AutoCorrectPrecisionMode ()
	Returns (modifiable) the auto-correct precision mode by default False. More...

Standard_Integer &	FixPeriodicDegeneratedMode ()
	Returns (modifiable) the activation flag for periodic degenerated fix. False by default. More...

TopoDS_Face	Face () const
	Returns a face which corresponds to the current state Warning: The finally produced face may be another one ... but with the same support. More...

TopoDS_Shape	Result () const
	Returns resulting shape (Face or Shell if splitted) To be used instead of Face() if FixMissingSeam involved. More...

void	Add (const TopoDS_Wire &wire)
	Add a wire to current face using BRep_Builder. Wire is added without taking into account orientation of face (as if face were FORWARD). More...

Standard_Boolean	Perform ()
	Performs all the fixes, depending on modes Function Status returns the status of last call to Perform() ShapeExtend_OK : face was OK, nothing done ShapeExtend_DONE1: some wires are fixed ShapeExtend_DONE2: orientation of wires fixed ShapeExtend_DONE3: missing seam added ShapeExtend_DONE4: small area wire removed ShapeExtend_DONE5: natural bounds added ShapeExtend_FAIL1: some fails during fixing wires ShapeExtend_FAIL2: cannot fix orientation of wires ShapeExtend_FAIL3: cannot add missing seam ShapeExtend_FAIL4: cannot remove small area wire. More...

Standard_Boolean	FixOrientation ()
	Fixes orientation of wires on the face It tries to make all wires lie outside all others (according to orientation) by reversing orientation of some of them. If face lying on sphere or torus has single wire and AddNaturalBoundMode is True, that wire is not reversed in any case (supposing that natural bound will be added). Returns True if wires were reversed. More...

Standard_Boolean	FixOrientation (TopTools_DataMapOfShapeListOfShape &MapWires)
	Fixes orientation of wires on the face It tries to make all wires lie outside all others (according to orientation) by reversing orientation of some of them. If face lying on sphere or torus has single wire and AddNaturalBoundMode is True, that wire is not reversed in any case (supposing that natural bound will be added). Returns True if wires were reversed OutWires return information about out wires + list of internal wires for each (for performing split face). More...

Standard_Boolean	FixAddNaturalBound ()
	Adds natural boundary on face if it is missing. Two cases are supported: More...

Standard_Boolean	FixMissingSeam ()
	Detects and fixes the special case when face on a closed surface is given by two wires closed in 3d but with gap in 2d. In that case it creates a new wire from the two, and adds a missing seam edge Returns True if missing seam was added. More...

Standard_Boolean	FixSmallAreaWire ()
	Detects wires with small area (that is less than 100*Precision::PConfusion(). Removes these wires if they are internal. Returns : True if at least one small wire removed, False if does nothing. More...

Standard_Boolean	FixLoopWire (TopTools_SequenceOfShape &aResWires)
	Detects if wire has a loop and fixes this situation by splitting on the few parts. if wire has a loops and it was splitted Status was set to value ShapeExtend_DONE6. More...

Standard_Boolean	FixIntersectingWires ()
	Detects and fixes the special case when face has more than one wire and this wires have intersection point. More...

Standard_Boolean	FixWiresTwoCoincEdges ()
	If wire contains two coincidence edges it must be removed Queries on status after Perform() More...

Standard_Boolean	FixSplitFace (const TopTools_DataMapOfShapeListOfShape &MapWires)
	Split face if there are more than one out wire using inrormation after FixOrientation() More...

Standard_Boolean	FixPeriodicDegenerated ()
	Fixes topology for a specific case when face is composed by a single wire belting a periodic surface. In that case a degenerated edge is reconstructed in the degenerated pole of the surface. Initial wire gets consistent orientation. Must be used in couple and before FixMissingSeam routine. More...

Standard_Boolean	Status (const ShapeExtend_Status status) const
	Returns the status of last call to Perform() ShapeExtend_OK : face was OK, nothing done ShapeExtend_DONE1: some wires are fixed ShapeExtend_DONE2: orientation of wires fixed ShapeExtend_DONE3: missing seam added ShapeExtend_DONE4: small area wire removed ShapeExtend_DONE5: natural bounds added ShapeExtend_DONE8: face may be splited ShapeExtend_FAIL1: some fails during fixing wires ShapeExtend_FAIL2: cannot fix orientation of wires ShapeExtend_FAIL3: cannot add missing seam ShapeExtend_FAIL4: cannot remove small area wire. More...

Handle< ShapeFix_Wire >	FixWireTool ()
	Returns tool for fixing wires. More...

Public Member Functions inherited from ShapeFix_Root
	ShapeFix_Root ()
	Empty Constructor (no context is created) More...

virtual void	Set (const Handle< ShapeFix_Root > &Root)
	Copy all fields from another Root object. More...

virtual void	SetContext (const Handle< ShapeBuild_ReShape > &context)
	Sets context. More...

Handle< ShapeBuild_ReShape >	Context () const
	Returns context. More...

Handle < ShapeExtend_BasicMsgRegistrator >	MsgRegistrator () const
	Returns message registrator. More...

Standard_Real	Precision () const
	Returns basic precision value. More...

Standard_Real	MinTolerance () const
	Returns minimal allowed tolerance. More...

Standard_Real	MaxTolerance () const
	Returns maximal allowed tolerance. More...

Standard_Real	LimitTolerance (const Standard_Real toler) const
	Returns tolerance limited by [myMinTol,myMaxTol]. More...

void	SendMsg (const TopoDS_Shape &shape, const Message_Msg &message, const Message_Gravity gravity=Message_Info) const
	Sends a message to be attached to the shape. Calls corresponding message of message registrator. More...

void	SendMsg (const Message_Msg &message, const Message_Gravity gravity=Message_Info) const
	Sends a message to be attached to myShape. Calls previous method. More...

void	SendWarning (const TopoDS_Shape &shape, const Message_Msg &message) const
	Sends a warning to be attached to the shape. Calls SendMsg with gravity set to Message_Warning. More...

void	SendWarning (const Message_Msg &message) const
	Calls previous method for myShape. More...

void	SendFail (const TopoDS_Shape &shape, const Message_Msg &message) const
	Sends a fail to be attached to the shape. Calls SendMsg with gravity set to Message_Fail. More...

void	SendFail (const Message_Msg &message) const
	Calls previous method for myShape. More...

Public Member Functions inherited from MMgt_TShared
virtual void	Delete () const
	Memory deallocator for transient classes. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual const Handle_Standard_Type &	DynamicType () const
	Returns a type information object about this object. More...

Standard_Boolean	IsInstance (const Handle_Standard_Type &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const Handle_Standard_Type &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

virtual Handle_Standard_Transient	This () const
	Returns a Handle which references this object. Must never be called to objects created in stack. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

Protected Attributes
Handle< ShapeAnalysis_Surface >	mySurf

TopoDS_Face	myFace

TopoDS_Shape	myResult

Handle< ShapeFix_Wire >	myFixWire

Standard_Boolean	myFwd

Standard_Integer	myStatus

Protected Attributes inherited from ShapeFix_Root
TopoDS_Shape	myShape

Additional Inherited Members
Static Protected Member Functions inherited from ShapeFix_Root
static Standard_Boolean	NeedFix (const Standard_Integer flag, const Standard_Boolean def=Standard_True)
	Auxiliary method for work with three-position (on/off/default) flags (modes) in ShapeFix. More...

Detailed Description

This operator allows to perform various fixes on face and its wires: fixes provided by ShapeFix_Wire, fixing orientation of wires, addition of natural bounds, fixing of missing seam edge, and detection and removal of null-area wires.

Constructor & Destructor Documentation

ShapeFix_Face::ShapeFix_Face ( )

Creates an empty tool.

ShapeFix_Face::ShapeFix_Face ( const TopoDS_Face & face )

Creates a tool and loads a face.

Member Function Documentation

void ShapeFix_Face::Add ( const TopoDS_Wire & wire )

Add a wire to current face using BRep_Builder. Wire is added without taking into account orientation of face (as if face were FORWARD).

Standard_Integer& ShapeFix_Face::AutoCorrectPrecisionMode ( )

Returns (modifiable) the auto-correct precision mode by default False.

virtual void ShapeFix_Face::ClearModes ( )

virtual

Sets all modes to default.

TopoDS_Face ShapeFix_Face::Face ( ) const

Returns a face which corresponds to the current state Warning: The finally produced face may be another one ... but with the same support.

Standard_Boolean ShapeFix_Face::FixAddNaturalBound ( )

Adds natural boundary on face if it is missing. Two cases are supported:

face has no wires
face lies on geometrically double-closed surface (sphere or torus) and none of wires is left-oriented Returns True if natural boundary was added

Standard_Integer& ShapeFix_Face::FixAddNaturalBoundMode ( )

Returns (modifiable) the add natural bound mode. If true, natural boundary is added on faces that miss them. Default is False for faces with single wire (they are handled by FixOrientation in that case) and True for others.

Standard_Boolean ShapeFix_Face::FixIntersectingWires ( )

Detects and fixes the special case when face has more than one wire and this wires have intersection point.

Standard_Integer& ShapeFix_Face::FixIntersectingWiresMode ( )

Returns (modifiable) the fix intersecting wires mode by default True.

Standard_Boolean ShapeFix_Face::FixLoopWire ( TopTools_SequenceOfShape & aResWires )

Detects if wire has a loop and fixes this situation by splitting on the few parts. if wire has a loops and it was splitted Status was set to value ShapeExtend_DONE6.

Standard_Integer& ShapeFix_Face::FixLoopWiresMode ( )

Returns (modifiable) the fix loop wires mode by default True.

Standard_Boolean ShapeFix_Face::FixMissingSeam ( )

Detects and fixes the special case when face on a closed surface is given by two wires closed in 3d but with gap in 2d. In that case it creates a new wire from the two, and adds a missing seam edge Returns True if missing seam was added.

Standard_Integer& ShapeFix_Face::FixMissingSeamMode ( )

Returns (modifiable) the fix missing seam mode, by default True. If True, tries to insert seam is missed.

Standard_Boolean ShapeFix_Face::FixOrientation ( )

Fixes orientation of wires on the face It tries to make all wires lie outside all others (according to orientation) by reversing orientation of some of them. If face lying on sphere or torus has single wire and AddNaturalBoundMode is True, that wire is not reversed in any case (supposing that natural bound will be added). Returns True if wires were reversed.

Standard_Boolean ShapeFix_Face::FixOrientation ( TopTools_DataMapOfShapeListOfShape & MapWires )

Fixes orientation of wires on the face It tries to make all wires lie outside all others (according to orientation) by reversing orientation of some of them. If face lying on sphere or torus has single wire and AddNaturalBoundMode is True, that wire is not reversed in any case (supposing that natural bound will be added). Returns True if wires were reversed OutWires return information about out wires + list of internal wires for each (for performing split face).

Standard_Integer& ShapeFix_Face::FixOrientationMode ( )

Returns (modifiable) the fix orientation mode, by default True. If True, wires oriented to border limited square.

Standard_Boolean ShapeFix_Face::FixPeriodicDegenerated ( )

Fixes topology for a specific case when face is composed by a single wire belting a periodic surface. In that case a degenerated edge is reconstructed in the degenerated pole of the surface. Initial wire gets consistent orientation. Must be used in couple and before FixMissingSeam routine.

Standard_Integer& ShapeFix_Face::FixPeriodicDegeneratedMode ( )

Returns (modifiable) the activation flag for periodic degenerated fix. False by default.

Standard_Boolean ShapeFix_Face::FixSmallAreaWire ( )

Detects wires with small area (that is less than 100*Precision::PConfusion(). Removes these wires if they are internal. Returns : True if at least one small wire removed, False if does nothing.

Standard_Integer& ShapeFix_Face::FixSmallAreaWireMode ( )

Returns (modifiable) the fix small area wire mode, by default False. If True, drops small wires.

Standard_Boolean ShapeFix_Face::FixSplitFace ( const TopTools_DataMapOfShapeListOfShape & MapWires )

Split face if there are more than one out wire using inrormation after FixOrientation()

Standard_Integer& ShapeFix_Face::FixSplitFaceMode ( )

Returns (modifiable) the fix split face mode by default True.

Standard_Integer& ShapeFix_Face::FixWireMode ( )

Returns (modifiable) the mode for applying fixes of ShapeFix_Wire, by default True.

Standard_Boolean ShapeFix_Face::FixWiresTwoCoincEdges ( )

If wire contains two coincidence edges it must be removed Queries on status after Perform()

Handle< ShapeFix_Wire > ShapeFix_Face::FixWireTool ( )

Returns tool for fixing wires.

void ShapeFix_Face::Init ( const TopoDS_Face & face )

Loads a whole face already created, with its wires, sense and location.

void ShapeFix_Face::Init	(	const Handle< Geom_Surface > &	surf,
		const Standard_Real	preci,
		const Standard_Boolean	fwd = `Standard_True`
	)

Starts the creation of the face By default it will be FORWARD, or REVERSED if <fwd> is False.

void ShapeFix_Face::Init	(	const Handle< ShapeAnalysis_Surface > &	surf,
		const Standard_Real	preci,
		const Standard_Boolean	fwd = `Standard_True`
	)

Starts the creation of the face By default it will be FORWARD, or REVERSED if <fwd> is False.

Standard_Boolean ShapeFix_Face::Perform ( )

Performs all the fixes, depending on modes Function Status returns the status of last call to Perform() ShapeExtend_OK : face was OK, nothing done ShapeExtend_DONE1: some wires are fixed ShapeExtend_DONE2: orientation of wires fixed ShapeExtend_DONE3: missing seam added ShapeExtend_DONE4: small area wire removed ShapeExtend_DONE5: natural bounds added ShapeExtend_FAIL1: some fails during fixing wires ShapeExtend_FAIL2: cannot fix orientation of wires ShapeExtend_FAIL3: cannot add missing seam ShapeExtend_FAIL4: cannot remove small area wire.

TopoDS_Shape ShapeFix_Face::Result ( ) const

Returns resulting shape (Face or Shell if splitted) To be used instead of Face() if FixMissingSeam involved.

virtual void ShapeFix_Face::SetMaxTolerance ( const Standard_Real maxtol )

virtual

Sets maximal allowed tolerance (also to FixWireTool)

Reimplemented from ShapeFix_Root.

virtual void ShapeFix_Face::SetMinTolerance ( const Standard_Real mintol )

virtual

Sets minimal allowed tolerance (also to FixWireTool)

Reimplemented from ShapeFix_Root.

virtual void ShapeFix_Face::SetMsgRegistrator ( const Handle< ShapeExtend_BasicMsgRegistrator > & msgreg )

virtual

Sets message registrator.

Reimplemented from ShapeFix_Root.

virtual void ShapeFix_Face::SetPrecision ( const Standard_Real preci )

virtual

Sets basic precision value (also to FixWireTool)

Reimplemented from ShapeFix_Root.

Standard_Boolean ShapeFix_Face::Status ( const ShapeExtend_Status status ) const

Returns the status of last call to Perform() ShapeExtend_OK : face was OK, nothing done ShapeExtend_DONE1: some wires are fixed ShapeExtend_DONE2: orientation of wires fixed ShapeExtend_DONE3: missing seam added ShapeExtend_DONE4: small area wire removed ShapeExtend_DONE5: natural bounds added ShapeExtend_DONE8: face may be splited ShapeExtend_FAIL1: some fails during fixing wires ShapeExtend_FAIL2: cannot fix orientation of wires ShapeExtend_FAIL3: cannot add missing seam ShapeExtend_FAIL4: cannot remove small area wire.

Field Documentation

TopoDS_Face ShapeFix_Face::myFace

protected

Handle< ShapeFix_Wire > ShapeFix_Face::myFixWire

protected

Standard_Boolean ShapeFix_Face::myFwd

protected

TopoDS_Shape ShapeFix_Face::myResult

protected

Standard_Integer ShapeFix_Face::myStatus

protected

Handle< ShapeAnalysis_Surface > ShapeFix_Face::mySurf

protected

The documentation for this class was generated from the following file:

ShapeFix_Face.hxx

ShapeFix_Face Class Reference

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Field Documentation