Manages date intervals. For example, a Period object gives the interval between two dates. A period is expressed in seconds and microseconds. More...

#include <Quantity_Period.hxx>

Public Member Functions
	Quantity_Period (const Standard_Integer dd, const Standard_Integer hh, const Standard_Integer mn, const Standard_Integer ss, const Standard_Integer mis=0, const Standard_Integer mics=0)
	Creates a Period With: 0 <= dd 0 <= hh 0 <= mn 0 <= ss 0 <= mis 0 <= mics. More...

	Quantity_Period (const Standard_Integer ss, const Standard_Integer mics=0)
	Creates a Period with a number of seconds and microseconds. Exceptions Quantity_PeriodDefinitionError: More...

void	Values (Standard_Integer &dd, Standard_Integer &hh, Standard_Integer &mn, Standard_Integer &ss, Standard_Integer &mis, Standard_Integer &mics) const
	Decomposes this period into a number of days,hours, minutes,seconds,milliseconds and microseconds Example of return values: 2 days, 15 hours, 0 minute , 0 second 0 millisecond and 0 microsecond. More...

void	Values (Standard_Integer &ss, Standard_Integer &mics) const
	Returns the number of seconds in Ss and the number of remainding microseconds in Mics of this period. Example of return values: 3600 seconds and 0 microseconds. More...

void	SetValues (const Standard_Integer dd, const Standard_Integer hh, const Standard_Integer mn, const Standard_Integer ss, const Standard_Integer mis=0, const Standard_Integer mics=0)
	Assigns to this period the time interval defined. More...

void	SetValues (const Standard_Integer ss, const Standard_Integer mics=0)
	Assigns to this period the time interval defined. More...

Quantity_Period	Subtract (const Quantity_Period &anOther) const
	Subtracts one Period from another and returns the difference. More...

Quantity_Period	operator- (const Quantity_Period &anOther) const

Quantity_Period	Add (const Quantity_Period &anOther) const
	Adds one Period to another one. More...

Quantity_Period	operator+ (const Quantity_Period &anOther) const

Standard_Boolean	IsEqual (const Quantity_Period &anOther) const
	Returns TRUE if both <me> and <other> are equal. More...

Standard_Boolean	operator== (const Quantity_Period &anOther) const

Standard_Boolean	IsShorter (const Quantity_Period &anOther) const
	Returns TRUE if <me> is shorter than <other>. More...

Standard_Boolean	operator< (const Quantity_Period &anOther) const

Standard_Boolean	IsLonger (const Quantity_Period &anOther) const
	Returns TRUE if <me> is longer then <other>. More...

Standard_Boolean	operator> (const Quantity_Period &anOther) const

	Quantity_Period ()

Standard_Integer	_CSFDB_GetQuantity_PeriodmySec () const

void	_CSFDB_SetQuantity_PeriodmySec (const Standard_Integer p)

Standard_Integer	_CSFDB_GetQuantity_PeriodmyUSec () const

void	_CSFDB_SetQuantity_PeriodmyUSec (const Standard_Integer p)

Static Public Member Functions
static Standard_Boolean	IsValid (const Standard_Integer dd, const Standard_Integer hh, const Standard_Integer mn, const Standard_Integer ss, const Standard_Integer mis=0, const Standard_Integer mics=0)
	Checks the validity of a Period in form (dd,hh,mn,ss,mil,mic) With: 0 <= dd 0 <= hh 0 <= mn 0 <= ss 0 <= mis 0 <= mics. More...

static Standard_Boolean	IsValid (const Standard_Integer ss, const Standard_Integer mics=0)
	Checks the validity of a Period in form (ss,mic) With: 0 <= ss 0 <= mics. More...

Detailed Description

Manages date intervals. For example, a Period object gives the interval between two dates. A period is expressed in seconds and microseconds.

Constructor & Destructor Documentation

Quantity_Period::Quantity_Period	(	const Standard_Integer	dd,
		const Standard_Integer	hh,
		const Standard_Integer	mn,
		const Standard_Integer	ss,
		const Standard_Integer	mis = `0`,
		const Standard_Integer	mics = `0`
	)

Creates a Period With: 0 <= dd 0 <= hh 0 <= mn 0 <= ss 0 <= mis 0 <= mics.

Quantity_Period::Quantity_Period	(	const Standard_Integer	ss,
		const Standard_Integer	mics = `0`
	)

Creates a Period with a number of seconds and microseconds. Exceptions Quantity_PeriodDefinitionError:

if the number of seconds expressed either by:
dd days, hh hours, mn minutes and ss seconds, or
Ss is less than 0.
if the number of microseconds expressed either by:
mis milliseconds and mics microseconds, or
Mics is less than 0.

Quantity_Period::Quantity_Period ( )

inline

Member Function Documentation

Standard_Integer Quantity_Period::_CSFDB_GetQuantity_PeriodmySec ( ) const

inline

Standard_Integer Quantity_Period::_CSFDB_GetQuantity_PeriodmyUSec ( ) const

inline

void Quantity_Period::_CSFDB_SetQuantity_PeriodmySec ( const Standard_Integer p )

inline

void Quantity_Period::_CSFDB_SetQuantity_PeriodmyUSec ( const Standard_Integer p )

inline

Quantity_Period Quantity_Period::Add ( const Quantity_Period & anOther ) const

Adds one Period to another one.

Standard_Boolean Quantity_Period::IsEqual ( const Quantity_Period & anOther ) const

Returns TRUE if both <me> and <other> are equal.

Standard_Boolean Quantity_Period::IsLonger ( const Quantity_Period & anOther ) const

Returns TRUE if <me> is longer then <other>.

Standard_Boolean Quantity_Period::IsShorter ( const Quantity_Period & anOther ) const

Returns TRUE if <me> is shorter than <other>.

static Standard_Boolean Quantity_Period::IsValid	(	const Standard_Integer	dd,
		const Standard_Integer	hh,
		const Standard_Integer	mn,
		const Standard_Integer	ss,
		const Standard_Integer	mis = `0`,
		const Standard_Integer	mics = `0`
	)

static

Checks the validity of a Period in form (dd,hh,mn,ss,mil,mic) With: 0 <= dd 0 <= hh 0 <= mn 0 <= ss 0 <= mis 0 <= mics.

static Standard_Boolean Quantity_Period::IsValid	(	const Standard_Integer	ss,
		const Standard_Integer	mics = `0`
	)

static

Checks the validity of a Period in form (ss,mic) With: 0 <= ss 0 <= mics.

Quantity_Period Quantity_Period::operator+ ( const Quantity_Period & anOther ) const

inline

Quantity_Period Quantity_Period::operator- ( const Quantity_Period & anOther ) const

inline

Standard_Boolean Quantity_Period::operator< ( const Quantity_Period & anOther ) const

inline

Standard_Boolean Quantity_Period::operator== ( const Quantity_Period & anOther ) const

inline

Standard_Boolean Quantity_Period::operator> ( const Quantity_Period & anOther ) const

inline

void Quantity_Period::SetValues	(	const Standard_Integer	dd,
		const Standard_Integer	hh,
		const Standard_Integer	mn,
		const Standard_Integer	ss,
		const Standard_Integer	mis = `0`,
		const Standard_Integer	mics = `0`
	)

Assigns to this period the time interval defined.

with dd days, hh hours, mn minutes, ss seconds, mis (defaulted to 0) milliseconds and mics (defaulted to 0) microseconds; or

void Quantity_Period::SetValues	(	const Standard_Integer	ss,
		const Standard_Integer	mics = `0`
	)

Assigns to this period the time interval defined.

with Ss seconds and Mics (defaulted to 0) microseconds. Exceptions Quantity_PeriodDefinitionError:
if the number of seconds expressed either by:
dd days, hh hours, mn minutes and ss seconds, or
Ss is less than 0.
if the number of microseconds expressed either by:
mis milliseconds and mics microseconds, or
Mics is less than 0.

Quantity_Period Quantity_Period::Subtract ( const Quantity_Period & anOther ) const

Subtracts one Period from another and returns the difference.

void Quantity_Period::Values	(	Standard_Integer &	dd,
		Standard_Integer &	hh,
		Standard_Integer &	mn,
		Standard_Integer &	ss,
		Standard_Integer &	mis,
		Standard_Integer &	mics
	)		const

Decomposes this period into a number of days,hours, minutes,seconds,milliseconds and microseconds Example of return values: 2 days, 15 hours, 0 minute , 0 second 0 millisecond and 0 microsecond.

void Quantity_Period::Values	(	Standard_Integer &	ss,
		Standard_Integer &	mics
	)		const

Returns the number of seconds in Ss and the number of remainding microseconds in Mics of this period. Example of return values: 3600 seconds and 0 microseconds.

The documentation for this class was generated from the following file:

Quantity_Period.hxx

Quantity_Period Class Reference

Public Member Functions

Static Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation