Describes functions to build evolved shapes. An evolved shape is built from a planar spine (face or wire) and a profile (wire). The evolved shape is the unlooped sweep (pipe) of the profile along the spine. Self-intersections are removed. A MakeEvolved object provides a framework for: More...
#include <BRepOffsetAPI_MakeEvolved.hxx>
Public Member Functions | |
| BRepOffsetAPI_MakeEvolved () | |
| BRepOffsetAPI_MakeEvolved (const TopoDS_Wire &Spine, const TopoDS_Wire &Profil, const GeomAbs_JoinType Join=GeomAbs_Arc, const Standard_Boolean AxeProf=Standard_True, const Standard_Boolean Solid=Standard_False, const Standard_Boolean ProfOnSpine=Standard_False, const Standard_Real Tol=0.0000001) | |
| BRepOffsetAPI_MakeEvolved (const TopoDS_Face &Spine, const TopoDS_Wire &Profil, const GeomAbs_JoinType Join=GeomAbs_Arc, const Standard_Boolean AxeProf=Standard_True, const Standard_Boolean Solid=Standard_False, const Standard_Boolean ProfOnSpine=Standard_False, const Standard_Real Tol=0.0000001) | |
| These constructors construct an evolved shape by sweeping the profile Profile along the spine Spine. The profile is defined in a coordinate system R. The coordinate system is determined by AxeProf: More... | |
| const BRepFill_Evolved & | Evolved () const |
| virtual void | Build () |
| Builds the resulting shape (redefined from MakeShape). More... | |
| const TopTools_ListOfShape & | GeneratedShapes (const TopoDS_Shape &SpineShape, const TopoDS_Shape &ProfShape) const |
| Returns the shapes created from a subshape <SpineShape> of the spine and a subshape <ProfShape> on the profile. More... | |
| const TopoDS_Shape & | Top () const |
| Return the face Top if <Solid> is True in the constructor. More... | |
| const TopoDS_Shape & | Bottom () const |
| Return the face Bottom if <Solid> is True in the constructor. More... | |
 Public Member Functions inherited from BRepBuilderAPI_MakeShape | |
| virtual void | Delete () |
| virtual | ~BRepBuilderAPI_MakeShape () |
| virtual const TopoDS_Shape & | Shape () const |
| Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built. More... | |
| operator TopoDS_Shape () const | |
| virtual const TopTools_ListOfShape & | Generated (const TopoDS_Shape &S) |
| Returns the list of shapes generated from the shape <S>. More... | |
| virtual const TopTools_ListOfShape & | Modified (const TopoDS_Shape &S) |
| Returns the list of shapes modified from the shape <S>. More... | |
| virtual Standard_Boolean | IsDeleted (const TopoDS_Shape &S) |
| Returns true if the shape S has been deleted. More... | |
| Public Member Functions inherited from BRepBuilderAPI_Command | |
| virtual | ~BRepBuilderAPI_Command () |
| virtual Standard_Boolean | IsDone () const |
| void | Check () const |
| Raises NotDone if done is false. More... | |
Additional Inherited Members | |
| Protected Member Functions inherited from BRepBuilderAPI_MakeShape | |
| BRepBuilderAPI_MakeShape () | |
| Protected Member Functions inherited from BRepBuilderAPI_Command | |
| BRepBuilderAPI_Command () | |
| Set done to False. More... | |
| void | Done () |
| Set done to true. More... | |
| void | NotDone () |
| Set done to false. More... | |
| Protected Attributes inherited from BRepBuilderAPI_MakeShape | |
| TopoDS_Shape | myShape |
| TopTools_ListOfShape | myGenerated |
Detailed Description
Describes functions to build evolved shapes. An evolved shape is built from a planar spine (face or wire) and a profile (wire). The evolved shape is the unlooped sweep (pipe) of the profile along the spine. Self-intersections are removed. A MakeEvolved object provides a framework for:
- defining the construction of an evolved shape,
- implementing the construction algorithm, and
- consulting the result. Computes an Evolved by 1 - sweeping a profil along a spine. 2 - removing the self-intersections.
The profile is defined in a Referential R. The position of the profile at the current point of the spine is given by confusing R and the local referential given by ( D0, D1 and the normal of the Spine)
If the Boolean <AxeProf> is true, R is O,X,Y,Z else R is defined as the local refential at the nearest point of the profil to the spine.
if <Solid> is TRUE the Shape result is completed to be a solid or a compound of solids.
Constructor & Destructor Documentation
| BRepOffsetAPI_MakeEvolved::BRepOffsetAPI_MakeEvolved | ( | ) |
| BRepOffsetAPI_MakeEvolved::BRepOffsetAPI_MakeEvolved | ( | const TopoDS_Wire & | Spine, |
| const TopoDS_Wire & | Profil, | ||
| const GeomAbs_JoinType | Join = GeomAbs_Arc, |
||
| const Standard_Boolean | AxeProf = Standard_True, |
||
| const Standard_Boolean | Solid = Standard_False, |
||
| const Standard_Boolean | ProfOnSpine = Standard_False, |
||
| const Standard_Real | Tol = 0.0000001 |
||
| ) |
| BRepOffsetAPI_MakeEvolved::BRepOffsetAPI_MakeEvolved | ( | const TopoDS_Face & | Spine, |
| const TopoDS_Wire & | Profil, | ||
| const GeomAbs_JoinType | Join = GeomAbs_Arc, |
||
| const Standard_Boolean | AxeProf = Standard_True, |
||
| const Standard_Boolean | Solid = Standard_False, |
||
| const Standard_Boolean | ProfOnSpine = Standard_False, |
||
| const Standard_Real | Tol = 0.0000001 |
||
| ) |
These constructors construct an evolved shape by sweeping the profile Profile along the spine Spine. The profile is defined in a coordinate system R. The coordinate system is determined by AxeProf:
- if AxeProf is true, R is the global coordinate system,
- if AxeProf is false, R is computed so that:
- its origin is given by the point on the spine which is closest to the profile,
- its "X Axis" is given by the tangent to the spine at this point, and
- its "Z Axis" is the normal to the plane which contains the spine. The position of the profile at the current point of the spine is given by making R coincident with the local coordinate system given by the current point, the tangent vector and the normal to the spine. Join defines the type of pipe generated by the salient vertices of the spine. The default type is GeomAbs_Arc where the vertices generate revolved pipes about the axis passing along the vertex and the normal to the plane of the spine. At present, this is the only construction type implemented.
Member Function Documentation
| const TopoDS_Shape& BRepOffsetAPI_MakeEvolved::Bottom | ( | ) | const |
Return the face Bottom if <Solid> is True in the constructor.
|
virtual |
Builds the resulting shape (redefined from MakeShape).
Reimplemented from BRepBuilderAPI_MakeShape.
| const BRepFill_Evolved& BRepOffsetAPI_MakeEvolved::Evolved | ( | ) | const |
| const TopTools_ListOfShape& BRepOffsetAPI_MakeEvolved::GeneratedShapes | ( | const TopoDS_Shape & | SpineShape, |
| const TopoDS_Shape & | ProfShape | ||
| ) | const |
Returns the shapes created from a subshape <SpineShape> of the spine and a subshape <ProfShape> on the profile.
| const TopoDS_Shape& BRepOffsetAPI_MakeEvolved::Top | ( | ) | const |
Return the face Top if <Solid> is True in the constructor.
The documentation for this class was generated from the following file:
