BRepFeat is necessary for the creation and manipulation of both form and mechanical features in a Boundary Representation framework. Form features can be depressions or protrusions and include the following types: More...

#include <BRepFeat.hxx>

Static Public Member Functions
static void	SampleEdges (const TopoDS_Shape &S, TColgp_SequenceOfPnt &Pt)

static void	Barycenter (const TopoDS_Shape &S, gp_Pnt &Pt)

static Standard_Real	ParametricBarycenter (const TopoDS_Shape &S, const Handle< Geom_Curve > &C)

static void	ParametricMinMax (const TopoDS_Shape &S, const Handle< Geom_Curve > &C, Standard_Real &prmin, Standard_Real &prmax, Standard_Real &prbmin, Standard_Real &prbmax, Standard_Boolean &flag, const Standard_Boolean Ori=Standard_False)
	Ori = True taking account the orientation. More...

static Standard_Boolean	IsInside (const TopoDS_Face &F1, const TopoDS_Face &F2)

static Standard_Boolean	IsInOut (const BRepTopAdaptor_FClass2d &FC, const Geom2dAdaptor_Curve &AC)

static void	FaceUntil (const TopoDS_Shape &S, TopoDS_Face &F)

static TopoDS_Solid	Tool (const TopoDS_Shape &SRef, const TopoDS_Face &Fac, const TopAbs_Orientation Orf)

static Standard_OStream &	Print (const BRepFeat_StatusError SE, Standard_OStream &S)
	Prints the Error description of the State <St> as a String on the Stream <S> and returns <S>. More...

Detailed Description

BRepFeat is necessary for the creation and manipulation of both form and mechanical features in a Boundary Representation framework. Form features can be depressions or protrusions and include the following types:

Cylinder
Draft Prism
Prism
Revolved feature
Pipe Depending on whether you wish to make a depression or a protrusion, you can choose your operation type between the following:
removing matter (a Boolean cut: Fuse setting 0)
adding matter (Boolean fusion: Fuse setting 1) The semantics of form feature creation is based on the construction of shapes:
for a certain length in a certain direction
up to a limiting face
from a limiting face at a height
above and/or below a plane The shape defining the construction of a feature can be either a supporting edge or a concerned area of a face. In case of supporting edge, this contour can be attached to a face of the basis shape by binding. When the contour is bound to this face, the information that the contour will slide on the face becomes available to the relevant class methods. In case of the concerned area of a face, you could, for example, cut it out and move it at a different height, which will define the limiting face of a protrusion or depression. Topological definition with local operations of this sort makes calculations simpler and faster than a global operation. The latter would entail a second phase of removing unwanted matter to get the same result. Mechanical features include ribs - protrusions - and grooves (or slots) - depressions along planar (linear) surfaces or revolution surfaces. The semantics of mechanical features is based on giving thickness to a contour. This thickness can either be unilateral
on one side of the contour - or bilateral - on both sides. As in the semantics of form features, the thickness is defined by construction of shapes in specific contexts. However, in case of mechanical features, development contexts differ. Here they include extrusion:
to a limiting face of the basis shape
to or from a limiting plane
to a height.

Member Function Documentation

static void BRepFeat::Barycenter	(	const TopoDS_Shape &	S,
		gp_Pnt &	Pt
	)

static

static void BRepFeat::FaceUntil	(	const TopoDS_Shape &	S,
		TopoDS_Face &	F
	)

static

static Standard_Boolean BRepFeat::IsInOut	(	const BRepTopAdaptor_FClass2d &	FC,
		const Geom2dAdaptor_Curve &	AC
	)

static

static Standard_Boolean BRepFeat::IsInside	(	const TopoDS_Face &	F1,
		const TopoDS_Face &	F2
	)

static

static Standard_Real BRepFeat::ParametricBarycenter	(	const TopoDS_Shape &	S,
		const Handle< Geom_Curve > &	C
	)

static

static void BRepFeat::ParametricMinMax	(	const TopoDS_Shape &	S,
		const Handle< Geom_Curve > &	C,
		Standard_Real &	prmin,
		Standard_Real &	prmax,
		Standard_Real &	prbmin,
		Standard_Real &	prbmax,
		Standard_Boolean &	flag,
		const Standard_Boolean	Ori = `Standard_False`
	)

static

Ori = True taking account the orientation.

static Standard_OStream& BRepFeat::Print	(	const BRepFeat_StatusError	SE,
		Standard_OStream &	S
	)

static

Prints the Error description of the State <St> as a String on the Stream <S> and returns <S>.

static void BRepFeat::SampleEdges	(	const TopoDS_Shape &	S,
		TColgp_SequenceOfPnt &	Pt
	)

static

static TopoDS_Solid BRepFeat::Tool	(	const TopoDS_Shape &	SRef,
		const TopoDS_Face &	Fac,
		const TopAbs_Orientation	Orf
	)

static

The documentation for this class was generated from the following file:

BRepFeat.hxx

BRepFeat Class Reference

Static Public Member Functions

Detailed Description

Member Function Documentation