Open CASCADE Technology  7.1.0.beta
Public Member Functions

ShapeExtend_CompositeSurface Class Reference

Composite surface is represented by a grid of surfaces (patches) connected geometrically. Patches may have different parametrisation ranges, but they should be parametrised in the same manner so that parameter of each patch (u,v) can be converted to global parameter on the whole surface (U,V) with help of linear transformation: More...

#include <ShapeExtend_CompositeSurface.hxx>

Inheritance diagram for ShapeExtend_CompositeSurface:
Inheritance graph
[legend]

Public Member Functions

 ShapeExtend_CompositeSurface ()
 Empty constructor. More...
 
 ShapeExtend_CompositeSurface (const Handle< TColGeom_HArray2OfSurface > &GridSurf, const ShapeExtend_Parametrisation param=ShapeExtend_Natural)
 Initializes by a grid of surfaces (calls Init()). More...
 
 ShapeExtend_CompositeSurface (const Handle< TColGeom_HArray2OfSurface > &GridSurf, const TColStd_Array1OfReal &UJoints, const TColStd_Array1OfReal &VJoints)
 Initializes by a grid of surfaces (calls Init()). More...
 
Standard_Boolean Init (const Handle< TColGeom_HArray2OfSurface > &GridSurf, const ShapeExtend_Parametrisation param=ShapeExtend_Natural)
 Initializes by a grid of surfaces. All the Surfaces of the grid must have geometrical connectivity as stated above. If geometrical connectivity is not satisfied, method returns False. However, class is initialized even in that case. More...
 
Standard_Boolean Init (const Handle< TColGeom_HArray2OfSurface > &GridSurf, const TColStd_Array1OfReal &UJoints, const TColStd_Array1OfReal &VJoints)
 Initializes by a grid of surfaces with given global parametrisation defined by UJoints and VJoints arrays, each having langth equal to number of patches in corresponding direction + 1. Global joint values should be sorted in increasing order. All the Surfaces of the grid must have geometrical connectivity as stated above. If geometrical connectivity is not satisfied, method returns False. However, class is initialized even in that case. More...
 
Standard_Integer NbUPatches () const
 Returns number of patches in U direction. More...
 
Standard_Integer NbVPatches () const
 Returns number of patches in V direction. More...
 
const Handle< Geom_Surface > & Patch (const Standard_Integer i, const Standard_Integer j) const
 Returns one surface patch. More...
 
const Handle< TColGeom_HArray2OfSurface > & Patches () const
 Returns grid of surfaces. More...
 
Handle< TColStd_HArray1OfReal > UJointValues () const
 Returns the array of U values corresponding to joint points between patches as well as to start and end points, which define global parametrisation of the surface. More...
 
Handle< TColStd_HArray1OfReal > VJointValues () const
 Returns the array of V values corresponding to joint points between patches as well as to start and end points, which define global parametrisation of the surface. More...
 
Standard_Real UJointValue (const Standard_Integer i) const
 Returns i-th joint value in U direction (1-st is global Umin, (NbUPatches()+1)-th is global Umax on the composite surface) More...
 
Standard_Real VJointValue (const Standard_Integer j) const
 Returns j-th joint value in V direction (1-st is global Vmin, (NbVPatches()+1)-th is global Vmax on the composite surface) More...
 
Standard_Boolean SetUJointValues (const TColStd_Array1OfReal &UJoints)
 Sets the array of U values corresponding to joint points, which define global parametrisation of the surface. Number of values in array should be equal to NbUPatches()+1. All the values should be sorted in increasing order. If this is not satisfied, does nothing and returns False. More...
 
Standard_Boolean SetVJointValues (const TColStd_Array1OfReal &VJoints)
 Sets the array of V values corresponding to joint points, which define global parametrisation of the surface Number of values in array should be equal to NbVPatches()+1. All the values should be sorted in increasing order. If this is not satisfied, does nothing and returns False. More...
 
void SetUFirstValue (const Standard_Real UFirst)
 Changes starting value for global U parametrisation (all other joint values are shifted accordingly) More...
 
void SetVFirstValue (const Standard_Real VFirst)
 Changes starting value for global V parametrisation (all other joint values are shifted accordingly) More...
 
Standard_Integer LocateUParameter (const Standard_Real U) const
 Returns number of col that contains given (global) parameter. More...
 
Standard_Integer LocateVParameter (const Standard_Real V) const
 Returns number of row that contains given (global) parameter. More...
 
void LocateUVPoint (const gp_Pnt2d &pnt, Standard_Integer &i, Standard_Integer &j) const
 Returns number of row and col of surface that contains given point. More...
 
const Handle< Geom_Surface > & Patch (const Standard_Real U, const Standard_Real V) const
 Returns one surface patch that contains given (global) parameters. More...
 
const Handle< Geom_Surface > & Patch (const gp_Pnt2d &pnt) const
 Returns one surface patch that contains given point. More...
 
Standard_Real ULocalToGlobal (const Standard_Integer i, const Standard_Integer j, const Standard_Real u) const
 Converts local parameter u on patch i,j to global parameter U. More...
 
Standard_Real VLocalToGlobal (const Standard_Integer i, const Standard_Integer j, const Standard_Real v) const
 Converts local parameter v on patch i,j to global parameter V. More...
 
gp_Pnt2d LocalToGlobal (const Standard_Integer i, const Standard_Integer j, const gp_Pnt2d &uv) const
 Converts local parameters uv on patch i,j to global parameters UV. More...
 
Standard_Real UGlobalToLocal (const Standard_Integer i, const Standard_Integer j, const Standard_Real U) const
 Converts global parameter U to local parameter u on patch i,j. More...
 
Standard_Real VGlobalToLocal (const Standard_Integer i, const Standard_Integer j, const Standard_Real V) const
 Converts global parameter V to local parameter v on patch i,j. More...
 
gp_Pnt2d GlobalToLocal (const Standard_Integer i, const Standard_Integer j, const gp_Pnt2d &UV) const
 Converts global parameters UV to local parameters uv on patch i,j. More...
 
Standard_Boolean GlobalToLocalTransformation (const Standard_Integer i, const Standard_Integer j, Standard_Real &uFact, gp_Trsf2d &Trsf) const
 Computes transformation operator and uFactor descrinbing affine transformation required to convert global parameters on composite surface to local parameters on patch (i,j): uv = ( uFactor, 1. ) X Trsf * UV; NOTE: Thus Trsf contains shift and scale by V, scale by U is stored in uFact. Returns True if transformation is not an identity. More...
 
virtual void Transform (const gp_Trsf &T) override
 Applies transformation to all the patches. More...
 
virtual Handle< Geom_GeometryCopy () const override
 Returns a copy of the surface. More...
 
virtual void UReverse () override
 NOT IMPLEMENTED (does nothing) More...
 
virtual Standard_Real UReversedParameter (const Standard_Real U) const override
 Returns U. More...
 
virtual void VReverse () override
 NOT IMPLEMENTED (does nothing) More...
 
virtual Standard_Real VReversedParameter (const Standard_Real V) const override
 Returns V. More...
 
virtual void Bounds (Standard_Real &U1, Standard_Real &U2, Standard_Real &V1, Standard_Real &V2) const override
 Returns the parametric bounds of grid. More...
 
virtual Standard_Boolean IsUClosed () const override
 Returns True if grid is closed in U direction (i.e. connected with Precision::Confusion) More...
 
virtual Standard_Boolean IsVClosed () const override
 Returns True if grid is closed in V direction (i.e. connected with Precision::Confusion) More...
 
virtual Standard_Boolean IsUPeriodic () const override
 Returns False. More...
 
virtual Standard_Boolean IsVPeriodic () const override
 Returns False. More...
 
virtual Handle< Geom_CurveUIso (const Standard_Real U) const override
 NOT IMPLEMENTED (returns Null curve) More...
 
virtual Handle< Geom_CurveVIso (const Standard_Real V) const override
 NOT IMPLEMENTED (returns Null curve) More...
 
virtual GeomAbs_Shape Continuity () const override
 returns C0 More...
 
virtual Standard_Boolean IsCNu (const Standard_Integer N) const override
 returns True if N <=0 More...
 
virtual Standard_Boolean IsCNv (const Standard_Integer N) const override
 returns True if N <=0 More...
 
virtual void D0 (const Standard_Real U, const Standard_Real V, gp_Pnt &P) const override
 Computes the point of parameter U,V on the grid. More...
 
virtual void D1 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V) const override
 Computes the point P and the first derivatives in the directions U and V at this point. More...
 
virtual void D2 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV) const override
 Computes the point P, the first and the second derivatives in the directions U and V at this point. More...
 
virtual void D3 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV, gp_Vec &D3U, gp_Vec &D3V, gp_Vec &D3UUV, gp_Vec &D3UVV) const override
 Computes the point P, the first,the second and the third derivatives in the directions U and V at this point. More...
 
virtual gp_Vec DN (const Standard_Real U, const Standard_Real V, const Standard_Integer Nu, const Standard_Integer Nv) const override
 Computes the derivative of order Nu in the direction U and Nv in the direction V at the point P(U, V). More...
 
gp_Pnt Value (const gp_Pnt2d &pnt) const
 Computes the point of parameter pnt on the grid. More...
 
void ComputeJointValues (const ShapeExtend_Parametrisation param=ShapeExtend_Natural)
 Computes Joint values according to parameter. More...
 
Standard_Boolean CheckConnectivity (const Standard_Real prec)
 Checks geometrical connectivity of the patches, including closedness (sets fields muUClosed and myVClosed) More...
 
- Public Member Functions inherited from Geom_Surface
Handle< Geom_SurfaceUReversed () const
 Reverses the U direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
 
Handle< Geom_SurfaceVReversed () const
 Reverses the V direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
 
virtual void TransformParameters (Standard_Real &U, Standard_Real &V, const gp_Trsf &T) const
 Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>. More...
 
virtual gp_GTrsf2d ParametricTransformation (const gp_Trsf &T) const
 Returns a 2d transformation used to find the new parameters of a point on the transformed surface. More...
 
virtual Standard_Real UPeriod () const
 Returns the period of this surface in the u parametric direction. raises if the surface is not uperiodic. More...
 
virtual Standard_Real VPeriod () const
 Returns the period of this surface in the v parametric direction. raises if the surface is not vperiodic. More...
 
gp_Pnt Value (const Standard_Real U, const Standard_Real V) const
 Computes the point of parameter U on the surface. More...
 
- Public Member Functions inherited from Geom_Geometry
void Mirror (const gp_Pnt &P)
 Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More...
 
void Mirror (const gp_Ax1 &A1)
 Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...
 
void Mirror (const gp_Ax2 &A2)
 Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More...
 
void Rotate (const gp_Ax1 &A1, const Standard_Real Ang)
 Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More...
 
void Scale (const gp_Pnt &P, const Standard_Real S)
 Scales a Geometry. S is the scaling value. More...
 
void Translate (const gp_Vec &V)
 Translates a Geometry. V is the vector of the tanslation. More...
 
void Translate (const gp_Pnt &P1, const gp_Pnt &P2)
 Translates a Geometry from the point P1 to the point P2. More...
 
Handle< Geom_GeometryMirrored (const gp_Pnt &P) const
 
Handle< Geom_GeometryMirrored (const gp_Ax1 &A1) const
 
Handle< Geom_GeometryMirrored (const gp_Ax2 &A2) const
 
Handle< Geom_GeometryRotated (const gp_Ax1 &A1, const Standard_Real Ang) const
 
Handle< Geom_GeometryScaled (const gp_Pnt &P, const Standard_Real S) const
 
Handle< Geom_GeometryTransformed (const gp_Trsf &T) const
 
Handle< Geom_GeometryTranslated (const gp_Vec &V) const
 
Handle< Geom_GeometryTranslated (const gp_Pnt &P1, const gp_Pnt &P2) const
 
- Public Member Functions inherited from MMgt_TShared
virtual void Delete () const override
 Memory deallocator for transient classes. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 

Detailed Description

Composite surface is represented by a grid of surfaces (patches) connected geometrically. Patches may have different parametrisation ranges, but they should be parametrised in the same manner so that parameter of each patch (u,v) can be converted to global parameter on the whole surface (U,V) with help of linear transformation:

for any i,j-th patch U = Ui + ( u - uijmin ) * ( Ui+1 - Ui ) / ( uijmax - uijmin ) V = Vj + ( v - vijmin ) * ( Vj+1 - Vj ) / ( vijmax - vijmin )

where

[uijmin, uijmax] * [ vijmin, vijmax] - parametric range of i,j-th patch,

Ui (i=1,..,Nu+1), Vi (j=1,..,Nv+1) - values defining global parametrisation by U and V (correspond to points between patches and bounds, (Ui,Uj) corresponds to (uijmin,vijmin) on i,j-th patch) and to (u(i-1)(j-1)max,v(i-1)(j-1)max) on (i-1),(j-1)-th patch.

Geometrical connectivity is expressed via global parameters: S[i,j](Ui+1,V) = S[i+1,j](Ui+1,V) for any i, j, V S[i,j](U,Vj+1) = S[i,j+1](U,Vj+1) for any i, j, U It is checked with Precision::Confusion() by default.

NOTE 1: This class is inherited from Geom_Surface in order to make it more easy to store and deal with it. However, it should not be passed to standard methods dealing with geometry since this type is not known to them. NOTE 2: Not all the inherited methods are implemented, and some are implemented not in the full form.

Constructor & Destructor Documentation

ShapeExtend_CompositeSurface::ShapeExtend_CompositeSurface ( )

Empty constructor.

ShapeExtend_CompositeSurface::ShapeExtend_CompositeSurface ( const Handle< TColGeom_HArray2OfSurface > &  GridSurf,
const ShapeExtend_Parametrisation  param = ShapeExtend_Natural 
)

Initializes by a grid of surfaces (calls Init()).

ShapeExtend_CompositeSurface::ShapeExtend_CompositeSurface ( const Handle< TColGeom_HArray2OfSurface > &  GridSurf,
const TColStd_Array1OfReal UJoints,
const TColStd_Array1OfReal VJoints 
)

Initializes by a grid of surfaces (calls Init()).

Member Function Documentation

virtual void ShapeExtend_CompositeSurface::Bounds ( Standard_Real U1,
Standard_Real U2,
Standard_Real V1,
Standard_Real V2 
) const
overridevirtual

Returns the parametric bounds of grid.

Implements Geom_Surface.

Standard_Boolean ShapeExtend_CompositeSurface::CheckConnectivity ( const Standard_Real  prec)

Checks geometrical connectivity of the patches, including closedness (sets fields muUClosed and myVClosed)

void ShapeExtend_CompositeSurface::ComputeJointValues ( const ShapeExtend_Parametrisation  param = ShapeExtend_Natural)

Computes Joint values according to parameter.

virtual GeomAbs_Shape ShapeExtend_CompositeSurface::Continuity ( ) const
overridevirtual

returns C0

Implements Geom_Surface.

virtual Handle< Geom_Geometry > ShapeExtend_CompositeSurface::Copy ( ) const
overridevirtual

Returns a copy of the surface.

Implements Geom_Geometry.

virtual void ShapeExtend_CompositeSurface::D0 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P 
) const
overridevirtual

Computes the point of parameter U,V on the grid.

Implements Geom_Surface.

virtual void ShapeExtend_CompositeSurface::D1 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V 
) const
overridevirtual

Computes the point P and the first derivatives in the directions U and V at this point.

Implements Geom_Surface.

virtual void ShapeExtend_CompositeSurface::D2 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V,
gp_Vec D2U,
gp_Vec D2V,
gp_Vec D2UV 
) const
overridevirtual

Computes the point P, the first and the second derivatives in the directions U and V at this point.

Implements Geom_Surface.

virtual void ShapeExtend_CompositeSurface::D3 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V,
gp_Vec D2U,
gp_Vec D2V,
gp_Vec D2UV,
gp_Vec D3U,
gp_Vec D3V,
gp_Vec D3UUV,
gp_Vec D3UVV 
) const
overridevirtual

Computes the point P, the first,the second and the third derivatives in the directions U and V at this point.

Implements Geom_Surface.

virtual gp_Vec ShapeExtend_CompositeSurface::DN ( const Standard_Real  U,
const Standard_Real  V,
const Standard_Integer  Nu,
const Standard_Integer  Nv 
) const
overridevirtual

Computes the derivative of order Nu in the direction U and Nv in the direction V at the point P(U, V).

Implements Geom_Surface.

gp_Pnt2d ShapeExtend_CompositeSurface::GlobalToLocal ( const Standard_Integer  i,
const Standard_Integer  j,
const gp_Pnt2d UV 
) const

Converts global parameters UV to local parameters uv on patch i,j.

Standard_Boolean ShapeExtend_CompositeSurface::GlobalToLocalTransformation ( const Standard_Integer  i,
const Standard_Integer  j,
Standard_Real uFact,
gp_Trsf2d Trsf 
) const

Computes transformation operator and uFactor descrinbing affine transformation required to convert global parameters on composite surface to local parameters on patch (i,j): uv = ( uFactor, 1. ) X Trsf * UV; NOTE: Thus Trsf contains shift and scale by V, scale by U is stored in uFact. Returns True if transformation is not an identity.

Standard_Boolean ShapeExtend_CompositeSurface::Init ( const Handle< TColGeom_HArray2OfSurface > &  GridSurf,
const ShapeExtend_Parametrisation  param = ShapeExtend_Natural 
)

Initializes by a grid of surfaces. All the Surfaces of the grid must have geometrical connectivity as stated above. If geometrical connectivity is not satisfied, method returns False. However, class is initialized even in that case.

Last parameter defines how global parametrisation (joint values) will be computed: ShapeExtend_Natural: U1 = u11min, Ui+1 = Ui + (ui1max-ui1min), etc. ShapeExtend_Uniform: Ui = i-1, Vj = j-1 ShapeExtend_Unitary: Ui = (i-1)/Nu, Vi = (j-1)/Nv

Standard_Boolean ShapeExtend_CompositeSurface::Init ( const Handle< TColGeom_HArray2OfSurface > &  GridSurf,
const TColStd_Array1OfReal UJoints,
const TColStd_Array1OfReal VJoints 
)

Initializes by a grid of surfaces with given global parametrisation defined by UJoints and VJoints arrays, each having langth equal to number of patches in corresponding direction + 1. Global joint values should be sorted in increasing order. All the Surfaces of the grid must have geometrical connectivity as stated above. If geometrical connectivity is not satisfied, method returns False. However, class is initialized even in that case.

virtual Standard_Boolean ShapeExtend_CompositeSurface::IsCNu ( const Standard_Integer  N) const
overridevirtual

returns True if N <=0

Implements Geom_Surface.

virtual Standard_Boolean ShapeExtend_CompositeSurface::IsCNv ( const Standard_Integer  N) const
overridevirtual

returns True if N <=0

Implements Geom_Surface.

virtual Standard_Boolean ShapeExtend_CompositeSurface::IsUClosed ( ) const
overridevirtual

Returns True if grid is closed in U direction (i.e. connected with Precision::Confusion)

Implements Geom_Surface.

virtual Standard_Boolean ShapeExtend_CompositeSurface::IsUPeriodic ( ) const
overridevirtual

Returns False.

Implements Geom_Surface.

virtual Standard_Boolean ShapeExtend_CompositeSurface::IsVClosed ( ) const
overridevirtual

Returns True if grid is closed in V direction (i.e. connected with Precision::Confusion)

Implements Geom_Surface.

virtual Standard_Boolean ShapeExtend_CompositeSurface::IsVPeriodic ( ) const
overridevirtual

Returns False.

Implements Geom_Surface.

gp_Pnt2d ShapeExtend_CompositeSurface::LocalToGlobal ( const Standard_Integer  i,
const Standard_Integer  j,
const gp_Pnt2d uv 
) const

Converts local parameters uv on patch i,j to global parameters UV.

Standard_Integer ShapeExtend_CompositeSurface::LocateUParameter ( const Standard_Real  U) const

Returns number of col that contains given (global) parameter.

void ShapeExtend_CompositeSurface::LocateUVPoint ( const gp_Pnt2d pnt,
Standard_Integer i,
Standard_Integer j 
) const

Returns number of row and col of surface that contains given point.

Standard_Integer ShapeExtend_CompositeSurface::LocateVParameter ( const Standard_Real  V) const

Returns number of row that contains given (global) parameter.

Standard_Integer ShapeExtend_CompositeSurface::NbUPatches ( ) const

Returns number of patches in U direction.

Standard_Integer ShapeExtend_CompositeSurface::NbVPatches ( ) const

Returns number of patches in V direction.

const Handle< Geom_Surface >& ShapeExtend_CompositeSurface::Patch ( const Standard_Integer  i,
const Standard_Integer  j 
) const

Returns one surface patch.

const Handle< Geom_Surface >& ShapeExtend_CompositeSurface::Patch ( const Standard_Real  U,
const Standard_Real  V 
) const

Returns one surface patch that contains given (global) parameters.

const Handle< Geom_Surface >& ShapeExtend_CompositeSurface::Patch ( const gp_Pnt2d pnt) const

Returns one surface patch that contains given point.

const Handle< TColGeom_HArray2OfSurface >& ShapeExtend_CompositeSurface::Patches ( ) const

Returns grid of surfaces.

void ShapeExtend_CompositeSurface::SetUFirstValue ( const Standard_Real  UFirst)

Changes starting value for global U parametrisation (all other joint values are shifted accordingly)

Standard_Boolean ShapeExtend_CompositeSurface::SetUJointValues ( const TColStd_Array1OfReal UJoints)

Sets the array of U values corresponding to joint points, which define global parametrisation of the surface. Number of values in array should be equal to NbUPatches()+1. All the values should be sorted in increasing order. If this is not satisfied, does nothing and returns False.

void ShapeExtend_CompositeSurface::SetVFirstValue ( const Standard_Real  VFirst)

Changes starting value for global V parametrisation (all other joint values are shifted accordingly)

Standard_Boolean ShapeExtend_CompositeSurface::SetVJointValues ( const TColStd_Array1OfReal VJoints)

Sets the array of V values corresponding to joint points, which define global parametrisation of the surface Number of values in array should be equal to NbVPatches()+1. All the values should be sorted in increasing order. If this is not satisfied, does nothing and returns False.

virtual void ShapeExtend_CompositeSurface::Transform ( const gp_Trsf T)
overridevirtual

Applies transformation to all the patches.

Implements Geom_Geometry.

Standard_Real ShapeExtend_CompositeSurface::UGlobalToLocal ( const Standard_Integer  i,
const Standard_Integer  j,
const Standard_Real  U 
) const

Converts global parameter U to local parameter u on patch i,j.

virtual Handle< Geom_Curve > ShapeExtend_CompositeSurface::UIso ( const Standard_Real  U) const
overridevirtual

NOT IMPLEMENTED (returns Null curve)

Implements Geom_Surface.

Standard_Real ShapeExtend_CompositeSurface::UJointValue ( const Standard_Integer  i) const

Returns i-th joint value in U direction (1-st is global Umin, (NbUPatches()+1)-th is global Umax on the composite surface)

Handle< TColStd_HArray1OfReal > ShapeExtend_CompositeSurface::UJointValues ( ) const

Returns the array of U values corresponding to joint points between patches as well as to start and end points, which define global parametrisation of the surface.

Standard_Real ShapeExtend_CompositeSurface::ULocalToGlobal ( const Standard_Integer  i,
const Standard_Integer  j,
const Standard_Real  u 
) const

Converts local parameter u on patch i,j to global parameter U.

virtual void ShapeExtend_CompositeSurface::UReverse ( )
overridevirtual

NOT IMPLEMENTED (does nothing)

Implements Geom_Surface.

virtual Standard_Real ShapeExtend_CompositeSurface::UReversedParameter ( const Standard_Real  U) const
overridevirtual

Returns U.

Implements Geom_Surface.

gp_Pnt ShapeExtend_CompositeSurface::Value ( const gp_Pnt2d pnt) const

Computes the point of parameter pnt on the grid.

Standard_Real ShapeExtend_CompositeSurface::VGlobalToLocal ( const Standard_Integer  i,
const Standard_Integer  j,
const Standard_Real  V 
) const

Converts global parameter V to local parameter v on patch i,j.

virtual Handle< Geom_Curve > ShapeExtend_CompositeSurface::VIso ( const Standard_Real  V) const
overridevirtual

NOT IMPLEMENTED (returns Null curve)

Implements Geom_Surface.

Standard_Real ShapeExtend_CompositeSurface::VJointValue ( const Standard_Integer  j) const

Returns j-th joint value in V direction (1-st is global Vmin, (NbVPatches()+1)-th is global Vmax on the composite surface)

Handle< TColStd_HArray1OfReal > ShapeExtend_CompositeSurface::VJointValues ( ) const

Returns the array of V values corresponding to joint points between patches as well as to start and end points, which define global parametrisation of the surface.

Standard_Real ShapeExtend_CompositeSurface::VLocalToGlobal ( const Standard_Integer  i,
const Standard_Integer  j,
const Standard_Real  v 
) const

Converts local parameter v on patch i,j to global parameter V.

virtual void ShapeExtend_CompositeSurface::VReverse ( )
overridevirtual

NOT IMPLEMENTED (does nothing)

Implements Geom_Surface.

virtual Standard_Real ShapeExtend_CompositeSurface::VReversedParameter ( const Standard_Real  V) const
overridevirtual

Returns V.

Implements Geom_Surface.


The documentation for this class was generated from the following file: