BRepFill_Sweep Class Reference

Topological Sweep Algorithm Computes an Sweep shell using a generating wire, an SectionLaw and an LocationLaw. More...

#include <BRepFill_Sweep.hxx>

Public Member Functions
	BRepFill_Sweep (const Handle< BRepFill_SectionLaw > &Section, const Handle< BRepFill_LocationLaw > &Location, const Standard_Boolean WithKPart)
void	SetBounds (const TopoDS_Wire &FirstShape, const TopoDS_Wire &LastShape)
void	SetTolerance (const Standard_Real Tol3d, const Standard_Real BoundTol=1.0, const Standard_Real Tol2d=1.0e-5, const Standard_Real TolAngular=1.0e-2)
	Set Approximation Tolerance Tol3d : Tolerance to surface approximation Tol2d : Tolerance used to perform curve approximation Normaly the 2d curve are approximated with a tolerance given by the resolution on support surfaces, but if this tolerance is too large Tol2d is used. TolAngular : Tolerance (in radian) to control the angle beetween tangents on the section law and tangent of iso-v on approximed surface. More...
void	SetAngularControl (const Standard_Real AngleMin=0.01, const Standard_Real AngleMax=6.0)
	Tolerance To controle Corner management. More...
void	SetForceApproxC1 (const Standard_Boolean ForceApproxC1)
	Set the flag that indicates attempt to approximate a C1-continuous surface if a swept surface proved to be C0. More...
void	Build (TopTools_MapOfShape &ReversedEdges, BRepFill_DataMapOfShapeHArray2OfShape &Tapes, BRepFill_DataMapOfShapeHArray2OfShape &Rails, const BRepFill_TransitionStyle Transition=BRepFill_Modified, const GeomAbs_Shape Continuity=GeomAbs_C2, const GeomFill_ApproxStyle Approx=GeomFill_Location, const Standard_Integer Degmax=11, const Standard_Integer Segmax=30)
	Build the Sweeep Surface Transition define Transition strategy Approx define Approximation Strategy. More...
Standard_Boolean	IsDone () const
	Say if the Shape is Build. More...
TopoDS_Shape	Shape () const
	returns the Sweeping Shape More...
Standard_Real	ErrorOnSurface () const
	Get the Approximation error. More...
Handle< TopTools_HArray2OfShape >	SubShape () const
Handle< TopTools_HArray2OfShape >	InterFaces () const
Handle< TopTools_HArray2OfShape >	Sections () const
TopoDS_Shape	Tape (const Standard_Integer Index) const
	returns the Tape corresponding to Index-th edge of section More...

Detailed Description

Topological Sweep Algorithm Computes an Sweep shell using a generating wire, an SectionLaw and an LocationLaw.

Constructor & Destructor Documentation

BRepFill_Sweep()

BRepFill_Sweep::BRepFill_Sweep	(	const Handle< BRepFill_SectionLaw > &	Section,
		const Handle< BRepFill_LocationLaw > &	Location,
		const Standard_Boolean	WithKPart
	)

Member Function Documentation

Build()

void BRepFill_Sweep::Build	(	TopTools_MapOfShape &	ReversedEdges,
		BRepFill_DataMapOfShapeHArray2OfShape &	Tapes,
		BRepFill_DataMapOfShapeHArray2OfShape &	Rails,
		const BRepFill_TransitionStyle	Transition = BRepFill_Modified,
		const GeomAbs_Shape	Continuity = GeomAbs_C2,
		const GeomFill_ApproxStyle	Approx = GeomFill_Location,
		const Standard_Integer	Degmax = 11,
		const Standard_Integer	Segmax = 30
	)

Build the Sweeep Surface Transition define Transition strategy Approx define Approximation Strategy.

• GeomFill_Section : The composed Function Location X Section is directly approximed.
• GeomFill_Location : The location law is approximed, and the SweepSurface is bulid algebric composition of approximed location law and section law This option is Ok, if Section.Surface() methode is effective. Continuity : The continuity in v waiting on the surface Degmax : The maximum degree in v requiered on the surface Segmax : The maximum number of span in v requiered on the surface.

ErrorOnSurface()

Standard_Real BRepFill_Sweep::ErrorOnSurface

(

)

const

Get the Approximation error.

InterFaces()

Handle< TopTools_HArray2OfShape > BRepFill_Sweep::InterFaces

(

)

const

IsDone()

Standard_Boolean BRepFill_Sweep::IsDone

(

)

const

Say if the Shape is Build.

Sections()

Handle< TopTools_HArray2OfShape > BRepFill_Sweep::Sections

(

)

const

SetAngularControl()

void BRepFill_Sweep::SetAngularControl	(	const Standard_Real	AngleMin = 0.01,
		const Standard_Real	AngleMax = 6.0
	)

Tolerance To controle Corner management.

If the discontinuity is lesser than <AngleMin> in radian The Transition Performed will be alway "Modified"

SetBounds()

void BRepFill_Sweep::SetBounds	(	const TopoDS_Wire &	FirstShape,
		const TopoDS_Wire &	LastShape
	)

SetForceApproxC1()

void BRepFill_Sweep::SetForceApproxC1

(

const Standard_Boolean

ForceApproxC1

)

Set the flag that indicates attempt to approximate a C1-continuous surface if a swept surface proved to be C0.

SetTolerance()

void BRepFill_Sweep::SetTolerance	(	const Standard_Real	Tol3d,
		const Standard_Real	BoundTol = 1.0,
		const Standard_Real	Tol2d = 1.0e-5,
		const Standard_Real	TolAngular = 1.0e-2
	)

Set Approximation Tolerance Tol3d : Tolerance to surface approximation Tol2d : Tolerance used to perform curve approximation Normaly the 2d curve are approximated with a tolerance given by the resolution on support surfaces, but if this tolerance is too large Tol2d is used. TolAngular : Tolerance (in radian) to control the angle beetween tangents on the section law and tangent of iso-v on approximed surface.

Shape()

TopoDS_Shape BRepFill_Sweep::Shape

(

)

const

returns the Sweeping Shape

SubShape()

Handle< TopTools_HArray2OfShape > BRepFill_Sweep::SubShape

(

)

const

Tape()

TopoDS_Shape BRepFill_Sweep::Tape

(

const Standard_Integer

Index

)

const

returns the Tape corresponding to Index-th edge of section

---

The documentation for this class was generated from the following file:

• BRepFill_Sweep.hxx