Geom2dGcc_Circ2dTanOnRadGeo Class Reference

This class implements the algorithms used to create a 2d circle tangent to a 2d entity, centered on a 2d entity and with a given radius. More than one argument must be a curve. The arguments of all construction methods are : More...

#include <Geom2dGcc_Circ2dTanOnRadGeo.hxx>

Public Member Functions
	Geom2dGcc_Circ2dTanOnRadGeo (const Geom2dGcc_QCurve &Qualified1, const gp_Lin2d &OnLine, const Standard_Real Radius, const Standard_Real Tolerance)
	This methods implements the algorithms used to create 2d Circles tangent to a curve and centered on a 2d Line with a given radius. Tolerance is used to find solution in every limit cases. raises NegativeValue in case of NegativeRadius. More...
	Geom2dGcc_Circ2dTanOnRadGeo (const Geom2dGcc_QCurve &Qualified1, const gp_Circ2d &OnCirc, const Standard_Real Radius, const Standard_Real Tolerance)
	This methods implements the algorithms used to create 2d Circles tangent to a curve and centered on a 2d Circle with a given radius. Tolerance is used to find solution in every limit cases. raises NegativeValue in case of NegativeRadius. More...
	Geom2dGcc_Circ2dTanOnRadGeo (const GccEnt_QualifiedCirc &Qualified1, const Geom2dAdaptor_Curve &OnCurv, const Standard_Real Radius, const Standard_Real Tolerance)
	This methods implements the algorithms used to create 2d Circles tangent to a circle and centered on a 2d curve with a given radius. Tolerance is used to find solution in every limit cases. raises NegativeValue in case of NegativeRadius. More...
	Geom2dGcc_Circ2dTanOnRadGeo (const GccEnt_QualifiedLin &Qualified1, const Geom2dAdaptor_Curve &OnCurv, const Standard_Real Radius, const Standard_Real Tolerance)
	This methods implements the algorithms used to create 2d Circles tangent to a 2d Line and centered on a 2d curve with a given radius. Tolerance is used to find solution in every limit cases. raises NegativeValue in case of NegativeRadius. More...
	Geom2dGcc_Circ2dTanOnRadGeo (const Geom2dGcc_QCurve &Qualified1, const Geom2dAdaptor_Curve &OnCurv, const Standard_Real Radius, const Standard_Real Tolerance)
	This methods implements the algorithms used to create 2d Circles tangent to a 2d curve and centered on a 2d curve with a given radius. Tolerance is used to find solution in every limit cases. raises NegativeValue in case of NegativeRadius. More...
	Geom2dGcc_Circ2dTanOnRadGeo (const gp_Pnt2d &Point1, const Geom2dAdaptor_Curve &OnCurv, const Standard_Real Radius, const Standard_Real Tolerance)
	This methods implements the algorithms used to create 2d Circles passing through a 2d point and centered on a 2d curve with a given radius. Tolerance is used to find solution in every limit cases. raises NegativeValue in case of NegativeRadius. More...
Standard_Boolean	IsDone () const
	This method returns True if the construction algorithm succeeded. More...
Standard_Integer	NbSolutions () const
	This method returns the number of solutions. It raises NotDone if the construction algorithm didn't succeed. More...
gp_Circ2d	ThisSolution (const Standard_Integer Index) const
	Returns the solution number Index and raises OutOfRange exception if Index is greater than the number of solutions. Be careful: the Index is only a way to get all the solutions, but is not associated to theses outside the context of the algorithm-object. It raises NotDone if the construction algorithm didn't succeed. It raises OutOfRange if Index is greater than the number of solutions. More...
void	WhichQualifier (const Standard_Integer Index, GccEnt_Position &Qualif1) const
void	Tangency1 (const Standard_Integer Index, Standard_Real &ParSol, Standard_Real &ParArg, gp_Pnt2d &PntSol) const
	Returns informations about the tangency point between the result number Index and the first argument. ParSol is the intrinsic parameter of the point on the solution curv. ParArg is the intrinsic parameter of the point on the argument curv. PntSol is the tangency point on the solution curv. PntArg is the tangency point on the argument curv. It raises NotDone if the construction algorithm didn't succeed. It raises OutOfRange if Index is greater than the number of solutions. More...
void	CenterOn3 (const Standard_Integer Index, Standard_Real &ParArg, gp_Pnt2d &PntSol) const
	Returns informations about the center (on the curv) of the result. ParArg is the intrinsic parameter of the point on the argument curv. PntSol is the center point of the solution curv. It raises NotDone if the construction algorithm didn't succeed. It raises OutOfRange if Index is greater than the number of solutions. More...
Standard_Boolean	IsTheSame1 (const Standard_Integer Index) const
	Returns True if the solution number Index is equal to the first argument and False in the other cases. It raises NotDone if the construction algorithm didn't succeed. It raises OutOfRange if Index is greater than the number of solutions. More...

Detailed Description

This class implements the algorithms used to create a 2d circle tangent to a 2d entity, centered on a 2d entity and with a given radius. More than one argument must be a curve. The arguments of all construction methods are :

• The qualified element for the tangency constrains (QualifiedCirc, QualifiedLin, QualifiedCurvPoints).
• The Center element (circle, line, curve).
• A real Tolerance. Tolerance is only used in the limits cases. For example : We want to create a circle tangent to an OutsideCurv Cu1 centered on a line OnLine with a radius Radius and with a tolerance Tolerance. If we did not use Tolerance it is impossible to find a solution in the following case : OnLine is outside Cu1. There is no intersection point between Cu1 and OnLine. The distance between the line and the circle is greater than Radius. With Tolerance we will give a solution if the distance between Cu1 and OnLine is lower than or equal Tolerance.

Constructor & Destructor Documentation

Geom2dGcc_Circ2dTanOnRadGeo() [1/6]

Geom2dGcc_Circ2dTanOnRadGeo::Geom2dGcc_Circ2dTanOnRadGeo	(	const Geom2dGcc_QCurve &	Qualified1,
		const gp_Lin2d &	OnLine,
		const Standard_Real	Radius,
		const Standard_Real	Tolerance
	)

This methods implements the algorithms used to create 2d Circles tangent to a curve and centered on a 2d Line with a given radius. Tolerance is used to find solution in every limit cases. raises NegativeValue in case of NegativeRadius.

Geom2dGcc_Circ2dTanOnRadGeo() [2/6]

Geom2dGcc_Circ2dTanOnRadGeo::Geom2dGcc_Circ2dTanOnRadGeo	(	const Geom2dGcc_QCurve &	Qualified1,
		const gp_Circ2d &	OnCirc,
		const Standard_Real	Radius,
		const Standard_Real	Tolerance
	)

This methods implements the algorithms used to create 2d Circles tangent to a curve and centered on a 2d Circle with a given radius. Tolerance is used to find solution in every limit cases. raises NegativeValue in case of NegativeRadius.

Geom2dGcc_Circ2dTanOnRadGeo() [3/6]

Geom2dGcc_Circ2dTanOnRadGeo::Geom2dGcc_Circ2dTanOnRadGeo	(	const GccEnt_QualifiedCirc &	Qualified1,
		const Geom2dAdaptor_Curve &	OnCurv,
		const Standard_Real	Radius,
		const Standard_Real	Tolerance
	)

This methods implements the algorithms used to create 2d Circles tangent to a circle and centered on a 2d curve with a given radius. Tolerance is used to find solution in every limit cases. raises NegativeValue in case of NegativeRadius.

Geom2dGcc_Circ2dTanOnRadGeo() [4/6]

Geom2dGcc_Circ2dTanOnRadGeo::Geom2dGcc_Circ2dTanOnRadGeo	(	const GccEnt_QualifiedLin &	Qualified1,
		const Geom2dAdaptor_Curve &	OnCurv,
		const Standard_Real	Radius,
		const Standard_Real	Tolerance
	)

This methods implements the algorithms used to create 2d Circles tangent to a 2d Line and centered on a 2d curve with a given radius. Tolerance is used to find solution in every limit cases. raises NegativeValue in case of NegativeRadius.

Geom2dGcc_Circ2dTanOnRadGeo() [5/6]

Geom2dGcc_Circ2dTanOnRadGeo::Geom2dGcc_Circ2dTanOnRadGeo	(	const Geom2dGcc_QCurve &	Qualified1,
		const Geom2dAdaptor_Curve &	OnCurv,
		const Standard_Real	Radius,
		const Standard_Real	Tolerance
	)

This methods implements the algorithms used to create 2d Circles tangent to a 2d curve and centered on a 2d curve with a given radius. Tolerance is used to find solution in every limit cases. raises NegativeValue in case of NegativeRadius.

Geom2dGcc_Circ2dTanOnRadGeo() [6/6]

Geom2dGcc_Circ2dTanOnRadGeo::Geom2dGcc_Circ2dTanOnRadGeo	(	const gp_Pnt2d &	Point1,
		const Geom2dAdaptor_Curve &	OnCurv,
		const Standard_Real	Radius,
		const Standard_Real	Tolerance
	)

This methods implements the algorithms used to create 2d Circles passing through a 2d point and centered on a 2d curve with a given radius. Tolerance is used to find solution in every limit cases. raises NegativeValue in case of NegativeRadius.

Member Function Documentation

CenterOn3()

void Geom2dGcc_Circ2dTanOnRadGeo::CenterOn3	(	const Standard_Integer	Index,
		Standard_Real &	ParArg,
		gp_Pnt2d &	PntSol
	)		const

Returns informations about the center (on the curv) of the result. ParArg is the intrinsic parameter of the point on the argument curv. PntSol is the center point of the solution curv. It raises NotDone if the construction algorithm didn't succeed. It raises OutOfRange if Index is greater than the number of solutions.

IsDone()

Standard_Boolean Geom2dGcc_Circ2dTanOnRadGeo::IsDone

(

)

const

This method returns True if the construction algorithm succeeded.

IsTheSame1()

Standard_Boolean Geom2dGcc_Circ2dTanOnRadGeo::IsTheSame1

(

const Standard_Integer

Index

)

const

Returns True if the solution number Index is equal to the first argument and False in the other cases. It raises NotDone if the construction algorithm didn't succeed. It raises OutOfRange if Index is greater than the number of solutions.

NbSolutions()

Standard_Integer Geom2dGcc_Circ2dTanOnRadGeo::NbSolutions

(

)

const

This method returns the number of solutions. It raises NotDone if the construction algorithm didn't succeed.

Tangency1()

void Geom2dGcc_Circ2dTanOnRadGeo::Tangency1	(	const Standard_Integer	Index,
		Standard_Real &	ParSol,
		Standard_Real &	ParArg,
		gp_Pnt2d &	PntSol
	)		const

Returns informations about the tangency point between the result number Index and the first argument. ParSol is the intrinsic parameter of the point on the solution curv. ParArg is the intrinsic parameter of the point on the argument curv. PntSol is the tangency point on the solution curv. PntArg is the tangency point on the argument curv. It raises NotDone if the construction algorithm didn't succeed. It raises OutOfRange if Index is greater than the number of solutions.

ThisSolution()

gp_Circ2d Geom2dGcc_Circ2dTanOnRadGeo::ThisSolution

(

const Standard_Integer

Index

)

const

Returns the solution number Index and raises OutOfRange exception if Index is greater than the number of solutions. Be careful: the Index is only a way to get all the solutions, but is not associated to theses outside the context of the algorithm-object. It raises NotDone if the construction algorithm didn't succeed. It raises OutOfRange if Index is greater than the number of solutions.

WhichQualifier()

void Geom2dGcc_Circ2dTanOnRadGeo::WhichQualifier	(	const Standard_Integer	Index,
		GccEnt_Position &	Qualif1
	)		const

---

The documentation for this class was generated from the following file:

• Geom2dGcc_Circ2dTanOnRadGeo.hxx