AIS_Dimension is a base class for 2D presentations of linear (length, diameter, radius) and angular dimensions. More...

#include <AIS_Dimension.hxx>

Inheritance diagram for AIS_Dimension:

[legend]

Data Structures
struct	SelectionGeometry
	Selection geometry of dimension presentation. The structure is filled with data during compute of presentation, then this data is used to generate selection sensitives when computing selection. More...

Public Types
enum	ComputeMode { ComputeMode_All = 0, ComputeMode_Line = 1, ComputeMode_Text = 2 }
	Specifies supported presentation compute modes. Used to compute only parts of presentation for advanced highlighting. More...

Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Public Member Functions
	AIS_Dimension (const AIS_KindOfDimension theType)
	Constructor with default parameters values. More...

Standard_Real	GetValue () const
	Gets dimension measurement value. If the value to display is not specified by user, then the dimension object is responsible to compute it on its own in model space coordinates. More...

void	SetComputedValue ()
	Sets computed dimension value. Resets custom value mode if it was set. More...

void	SetCustomValue (const Standard_Real theValue)
	Sets user-defined dimension value. The user-defined dimension value is specified in model space, and affect by unit conversion during the display. More...

void	SetCustomValue (const TCollection_ExtendedString &theValue)
	Sets user-defined dimension value. Unit conversion during the display is not applyed. More...

const TCollection_ExtendedString &	GetCustomValue () const
	Gets user-defined dimension value. More...

const gp_Pln &	GetPlane () const
	Get the dimension plane in which the 2D dimension presentation is computed. By default, if plane is not defined by user, it is computed automatically after dimension geometry is computed. If computed dimension geometry (points) can't be placed on the user-defined plane, dimension geometry was set as invalid (validity flag is set to false) and dimension presentation will not be computed. If user-defined plane allow geometry placement on it, it will be used for computing of the dimension presentation. More...

Standard_Integer	GetGeometryType () const
	Geometry type defines type of shapes on which the dimension is to be built. More...

virtual void	SetCustomPlane (const gp_Pln &thePlane)
	Sets user-defined plane where the 2D dimension presentation will be placed. Checks validity of this plane if geometry has been set already. Validity of the plane is checked according to the geometry set and has different criteria for different kinds of dimensions. More...

void	UnsetCustomPlane ()
	Unsets user-defined plane. Therefore the plane for dimension will be computed automatically. More...

Standard_Boolean	IsTextPositionCustom () const

virtual void	SetTextPosition (const gp_Pnt &)
	Fixes the absolute text position and adjusts flyout, plane and text alignment according to it. Updates presentation if the text position is valid. ATTENTION! It does not change vertical text alignment. More...

virtual const gp_Pnt	GetTextPosition () const
	Computes absolute text position from dimension parameters (flyout, plane and text alignment). More...

Handle< Prs3d_DimensionAspect >	DimensionAspect () const
	Gets the dimension aspect from AIS object drawer. Dimension aspect contains aspects of line, text and arrows for dimension presentation. More...

void	SetDimensionAspect (const Handle< Prs3d_DimensionAspect > &theDimensionAspect)
	Sets new dimension aspect for the interactive object drawer. The dimension aspect provides dynamic properties which are generally used during computation of dimension presentations. More...

AIS_KindOfDimension	KindOfDimension () const

virtual AIS_KindOfInteractive	Type () const override

virtual Standard_Boolean	AcceptDisplayMode (const Standard_Integer theMode) const override
	Returns true if the class of objects accepts the display mode theMode. The interactive context can have a default mode of representation for the set of Interactive Objects. This mode may not be accepted by object. More...

AIS_DisplaySpecialSymbol	DisplaySpecialSymbol () const

void	SetDisplaySpecialSymbol (const AIS_DisplaySpecialSymbol theDisplaySpecSymbol)
	Specifies whether to display special symbol or not. More...

Standard_ExtCharacter	SpecialSymbol () const

void	SetSpecialSymbol (const Standard_ExtCharacter theSpecialSymbol)
	Specifies special symbol. More...

virtual const TCollection_AsciiString &	GetDisplayUnits () const

virtual const TCollection_AsciiString &	GetModelUnits () const

virtual void	SetDisplayUnits (const TCollection_AsciiString &)

virtual void	SetModelUnits (const TCollection_AsciiString &)

void	UnsetFixedTextPosition ()
	Unsets user defined text positioning and enables text positioning by other parameters: text alignment, extension size, flyout and custom plane. More...

Standard_Real	SelToleranceForText2d () const
	Returns selection tolerance for text2d: For 2d text selection detection sensitive point with tolerance is used Important! Only for 2d text. More...

void	SetSelToleranceForText2d (const Standard_Real theTol)
	Sets selection tolerance for text2d: For 2d text selection detection sensitive point with tolerance is used to change this tolerance use this method Important! Only for 2d text. More...

Standard_Real	GetFlyout () const

void	SetFlyout (const Standard_Real theFlyout)
	Sets flyout value for dimension. More...

virtual Standard_Boolean	IsValid () const
	Check that the input geometry for dimension is valid and the presentation can be successfully computed. More...

Public Member Functions inherited from AIS_InteractiveObject
virtual Standard_Integer	Signature () const
	Specifies additional characteristics of Interactive Object of Type(); -1 by default. Among the datums, this signature is attributed to the shape. The remaining datums have the following default signatures: More...

void	Redisplay (const Standard_Boolean AllModes=Standard_False)
	Updates the active presentation; if <AllModes> = Standard_True all the presentations inside are recomputed. IMPORTANT: It is preferable to call Redisplay method of corresponding AIS_InteractiveContext instance for cases when it is accessible. This method just redirects call to myCTXPtr, so this class field must be up to date for proper result. More...

Standard_Boolean	HasInteractiveContext () const
	Indicates whether the Interactive Object has a pointer to an interactive context. More...

AIS_InteractiveContext *	InteractiveContext () const
	Returns the context pointer to the interactive context. More...

virtual void	SetContext (const Handle< AIS_InteractiveContext > &aCtx)
	Sets the interactive context aCtx and provides a link to the default drawing tool or "Drawer" if there is none. More...

Standard_Boolean	HasOwner () const
	Returns true if the object has an owner attributed to it. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. More...

const Handle< Standard_Transient > &	GetOwner () const
	Returns the owner of the Interactive Object. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. There are two types of owners: More...

void	SetOwner (const Handle< Standard_Transient > &theApplicativeEntity)
	Allows you to attribute the owner theApplicativeEntity to an Interactive Object. This can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of. The owner takes the form of a transient. More...

void	ClearOwner ()
	Each Interactive Object has methods which allow us to attribute an Owner to it in the form of a Transient. This method removes the owner from the graphic entity. More...

Handle< AIS_InteractiveContext >	GetContext () const
	Returns the context pointer to the interactive context. More...

Standard_Boolean	HasPresentation () const
	Returns TRUE when this object has a presentation in the current DisplayMode() More...

Handle< Prs3d_Presentation >	Presentation () const
	Returns the current presentation of this object according to the current DisplayMode() More...

void	SetAspect (const Handle< Prs3d_BasicAspect > &anAspect)
	Sets the graphic basic aspect to the current presentation. More...

virtual void	DumpJson (Standard_OStream &theOStream, const Standard_Integer theDepth=-1) const override
	Dumps the content of me into the stream. More...

Public Member Functions inherited from SelectMgr_SelectableObject
virtual	~SelectMgr_SelectableObject ()
	Clears all selections of the object. More...

virtual Standard_Boolean	AcceptShapeDecomposition () const
	Informs the graphic context that the interactive Object may be decomposed into sub-shapes for dynamic selection. The most used Interactive Object is AIS_Shape. More...

void	RecomputePrimitives ()
	Re-computes the sensitive primitives for all modes. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...

void	RecomputePrimitives (const Standard_Integer theMode)
	Re-computes the sensitive primitives which correspond to the <theMode>th selection mode. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...

void	AddSelection (const Handle< SelectMgr_Selection > &aSelection, const Standard_Integer aMode)
	Adds the selection aSelection with the selection mode index aMode to this framework. More...

void	ClearSelections (const Standard_Boolean update=Standard_False)
	Empties all the selections in the SelectableObject <update> parameter defines whether all object's selections should be flagged for further update or not. This improved method can be used to recompute an object's selection (without redisplaying the object completely) when some selection mode is activated not for the first time. More...

const Handle< SelectMgr_Selection > &	Selection (const Standard_Integer theMode) const
	Returns the selection having specified selection mode or NULL. More...

Standard_Boolean	HasSelection (const Standard_Integer theMode) const
	Returns true if a selection corresponding to the selection mode theMode was computed for this object. More...

const SelectMgr_SequenceOfSelection &	Selections () const
	Return the sequence of selections. More...

void	ResetTransformation () override
	resets local transformation to identity. More...

virtual void	UpdateTransformation () override
	Recomputes the location of the selection aSelection. More...

virtual void	UpdateTransformations (const Handle< SelectMgr_Selection > &aSelection)
	Updates locations in all sensitive entities from <aSelection> and in corresponding entity owners. More...

virtual void	HilightSelected (const Handle< PrsMgr_PresentationManager > &thePrsMgr, const SelectMgr_SequenceOfOwner &theSeq)
	Method which draws selected owners ( for fast presentation draw ) More...

virtual void	ClearSelected ()
	Method which clear all selected owners belonging to this selectable object ( for fast presentation draw ) More...

virtual void	ClearDynamicHighlight (const Handle< PrsMgr_PresentationManager > &theMgr)
	Method that needs to be implemented when the object manages selection and dynamic highlighting on its own. Clears or invalidates dynamic highlight presentation. By default it clears immediate draw of given presentation manager. More...

virtual void	HilightOwnerWithColor (const Handle< PrsMgr_PresentationManager > &thePM, const Handle< Prs3d_Drawer > &theStyle, const Handle< SelectMgr_EntityOwner > &theOwner)
	Method which hilight an owner belonging to this selectable object ( for fast presentation draw ) More...

virtual Standard_Boolean	IsAutoHilight () const
	If returns True, the old mechanism for highlighting selected objects is used (HilightSelected Method may be empty). If returns False, the HilightSelected method will be fully responsible for highlighting selected entity owners belonging to this selectable object. More...

virtual void	SetAutoHilight (const Standard_Boolean theAutoHilight)
	Set AutoHilight property to true or false. More...

Handle< Prs3d_Presentation >	GetHilightPresentation (const Handle< PrsMgr_PresentationManager > &thePrsMgr)
	Creates or returns existing presentation for highlighting detected object. More...

Handle< Prs3d_Presentation >	GetSelectPresentation (const Handle< PrsMgr_PresentationManager > &thePrsMgr)
	Creates or returns existing presentation for highlighting selected object. More...

virtual void	ErasePresentations (Standard_Boolean theToRemove)
	Removes presentations returned by GetHilightPresentation() and GetSelectPresentation(). More...

virtual void	SetZLayer (const Graphic3d_ZLayerId theLayerId) override
	Set Z layer ID and update all presentations of the selectable object. The layers mechanism allows drawing objects in higher layers in overlay of objects in lower layers. More...

void	UpdateSelection (const Standard_Integer theMode=-1)
	Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated. More...

void	SetAssemblyOwner (const Handle< SelectMgr_EntityOwner > &theOwner, const Standard_Integer theMode=-1)
	Sets common entity owner for assembly sensitive object entities. More...

Bnd_Box	BndBoxOfSelected (const Handle< SelectMgr_IndexedMapOfOwner > &theOwners)
	Returns a bounding box of sensitive entities with the owners given if they are a part of activated selection. More...

Standard_Integer	GlobalSelectionMode () const
	Returns the mode for selection of object as a whole; 0 by default. More...

virtual Handle< SelectMgr_EntityOwner >	GlobalSelOwner () const
	Returns the owner of mode for selection of object as a whole. More...

virtual const Handle< SelectMgr_EntityOwner > &	GetAssemblyOwner () const
	Returns common entity owner if the object is an assembly. More...

void	Init ()
	Begins the iteration scanning for sensitive primitives. More...

Standard_Boolean	More () const
	Continues the iteration scanning for sensitive primitives. More...

void	Next ()
	Continues the iteration scanning for sensitive primitives. More...

const Handle< SelectMgr_Selection > &	CurrentSelection () const
	Returns the current selection in this framework. More...

Public Member Functions inherited from PrsMgr_PresentableObject
PrsMgr_Presentations &	Presentations ()
	Return presentations. More...

Graphic3d_ZLayerId	ZLayer () const
	Get ID of Z layer for main presentation. More...

Standard_Boolean	IsMutable () const
	Returns true if object has mutable nature (content or location are be changed regularly). Mutable object will be managed in different way than static onces (another optimizations). More...

virtual void	SetMutable (const Standard_Boolean theIsMutable)
	Sets if the object has mutable nature (content or location will be changed regularly). This method should be called before object displaying to take effect. More...

Standard_Boolean	HasDisplayMode () const
	Returns true if the Interactive Object has display mode setting overriding global setting (within Interactive Context). More...

Standard_Integer	DisplayMode () const
	Returns the display mode setting of the Interactive Object. The range of supported display mode indexes should be specified within object definition and filtered by AccepDisplayMode(). More...

void	SetDisplayMode (const Standard_Integer theMode)
	Sets the display mode for the interactive object. An object can have its own temporary display mode, which is different from that proposed by the interactive context. More...

void	UnsetDisplayMode ()
	Removes display mode settings from the interactive object. More...

Standard_Boolean	HasHilightMode () const
	Returns true if the Interactive Object is in highlight mode. More...

Standard_Integer	HilightMode () const
	Returns highlight display mode. This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead. More...

void	SetHilightMode (const Standard_Integer theMode)
	Sets highlight display mode. This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead. More...

void	UnsetHilightMode ()
	Unsets highlight display mode. More...

virtual Standard_Integer	DefaultDisplayMode () const
	Returns the default display mode. More...

Standard_Boolean	ToBeUpdated (Standard_Boolean theToIncludeHidden=Standard_False) const
	Returns TRUE if any active presentation has invalidation flag. More...

void	SetToUpdate (Standard_Integer theMode)
	Flags presentation to be updated; UpdatePresentations() will recompute these presentations. More...

void	SetToUpdate ()
	flags all the Presentations to be Updated. More...

Standard_Boolean	IsInfinite () const
	Returns true if the interactive object is infinite; FALSE by default. This flag affects various operations operating on bounding box of graphic presentations of this object. For instance, infinite objects are not taken in account for View FitAll. This does not necessarily means that object is actually infinite, auxiliary objects might be also marked with this flag to achieve desired behavior. More...

void	SetInfiniteState (const Standard_Boolean theFlag=Standard_True)
	Sets if object should be considered as infinite. More...

PrsMgr_TypeOfPresentation3d	TypeOfPresentation3d () const
	Returns information on whether the object accepts display in HLR mode or not. More...

void	SetTypeOfPresentation (const PrsMgr_TypeOfPresentation3d theType)
	Set type of presentation. More...

const Handle< Prs3d_Drawer > &	Attributes () const
	Returns the attributes settings. More...

virtual void	SetAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the drawing tool theDrawer. More...

const Handle< Prs3d_Drawer > &	HilightAttributes () const
	Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalSelected and Prs3d_TypeOfHighlight_Selected defined within AIS_InteractiveContext. More...

virtual void	SetHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the hilight drawing tool theDrawer. More...

const Handle< Prs3d_Drawer > &	DynamicHilightAttributes () const
	Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalDynamic and Prs3d_TypeOfHighlight_Dynamic defined within AIS_InteractiveContext. More...

virtual void	SetDynamicHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the dynamic hilight drawing tool. More...

virtual void	UnsetHilightAttributes ()
	Clears settings provided by the hilight drawing tool theDrawer. More...

void	SynchronizeAspects ()
	Synchronize presentation aspects after their modification. More...

const Handle< Graphic3d_TransformPers > &	TransformPersistence () const
	Returns Transformation Persistence defining a special Local Coordinate system where this presentable object is located or NULL handle if not defined. Position of the object having Transformation Persistence is mutable and depends on camera position. The same applies to a bounding box of the object. More...

virtual void	SetTransformPersistence (const Handle< Graphic3d_TransformPers > &theTrsfPers)
	Sets up Transform Persistence defining a special Local Coordinate system where this object should be located. Note that management of Transform Persistence object is more expensive than of the normal one, because it requires its position being recomputed basing on camera position within each draw call / traverse. More...

const Handle< Geom_Transformation > &	LocalTransformationGeom () const
	Return the local transformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

void	SetLocalTransformation (const gp_Trsf &theTrsf)
	Sets local transformation to theTransformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

void	SetLocalTransformation (const Handle< Geom_Transformation > &theTrsf)
	Sets local transformation to theTransformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

Standard_Boolean	HasTransformation () const
	Returns true if object has a transformation that is different from the identity. More...

const Handle< Geom_Transformation > &	TransformationGeom () const
	Return the transformation taking into account transformation of parent object(s). Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

const gp_Trsf &	LocalTransformation () const
	Return the local transformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

const gp_Trsf &	Transformation () const
	Return the transformation taking into account transformation of parent object(s). Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

const gp_GTrsf &	InversedTransformation () const
	Return inversed transformation. More...

const Handle< Geom_Transformation > &	CombinedParentTransformation () const
	Return combined parent transformation. More...

const Handle< Graphic3d_SequenceOfHClipPlane > &	ClipPlanes () const
	Get clip planes. More...

virtual void	SetClipPlanes (const Handle< Graphic3d_SequenceOfHClipPlane > &thePlanes)
	Set clip planes for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes. More...

virtual void	AddClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
	Adds clip plane for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes. More...

virtual void	RemoveClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
	Removes previously added clip plane. More...

PrsMgr_PresentableObject *	Parent () const
	Returns parent of current object in scene hierarchy. More...

const PrsMgr_ListOfPresentableObjects &	Children () const
	Returns children of the current object. More...

virtual void	AddChild (const Handle< PrsMgr_PresentableObject > &theObject)
	Makes theObject child of current object in scene hierarchy. More...

void	AddChildWithCurrentTransformation (const Handle< PrsMgr_PresentableObject > &theObject)
	Makes theObject child of current object in scene hierarchy with keeping the current global transformation So the object keeps the same position/orientation in the global CS. More...

virtual void	RemoveChild (const Handle< PrsMgr_PresentableObject > &theObject)
	Removes theObject from children of current object in scene hierarchy. More...

void	RemoveChildWithRestoreTransformation (const Handle< PrsMgr_PresentableObject > &theObject)
	Removes theObject from children of current object in scene hierarchy with keeping the current global transformation. So the object keeps the same position/orientation in the global CS. More...

Standard_Boolean	HasOwnPresentations () const
	Returns true if object should have own presentations. More...

virtual void	BoundingBox (Bnd_Box &theBndBox)
	Returns bounding box of object correspondingly to its current display mode. This method requires presentation to be already computed, since it relies on bounding box of presentation structures, which are supposed to be same/close amongst different display modes of this object. More...

void	SetIsoOnTriangulation (const Standard_Boolean theIsEnabled)
	Enables or disables on-triangulation build of isolines according to the flag given. More...

Aspect_TypeOfFacingModel	CurrentFacingModel () const
	Returns the current facing model which is in effect. More...

void	SetCurrentFacingModel (const Aspect_TypeOfFacingModel theModel=Aspect_TOFM_BOTH_SIDE)
	change the current facing model apply on polygons for SetColor(), SetTransparency(), SetMaterial() methods default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is applying both on the front and back face. More...

Standard_Boolean	HasColor () const
	Returns true if the Interactive Object has color. More...

virtual void	Color (Quantity_Color &theColor) const
	Returns the color setting of the Interactive Object. More...

virtual void	SetColor (const Quantity_Color &theColor)
	Only the interactive object knowns which Drawer attribute is affected by the color, if any (ex: for a wire,it's the wireaspect field of the drawer, but for a vertex, only the point aspect field is affected by the color). WARNING : Do not forget to set the corresponding fields here (hasOwnColor and myDrawer->SetColor()) More...

virtual void	UnsetColor ()
	Removes color settings. Only the Interactive Object knows which Drawer attribute is affected by the color setting. For a wire, for example, wire aspect is the attribute affected. For a vertex, however, only point aspect is affected by the color setting. More...

Standard_Boolean	HasWidth () const
	Returns true if the Interactive Object has width. More...

Standard_Real	Width () const
	Returns the width setting of the Interactive Object. More...

virtual void	SetWidth (const Standard_Real theWidth)
	Allows you to provide the setting aValue for width. Only the Interactive Object knows which Drawer attribute is affected by the width setting. More...

virtual void	UnsetWidth ()
	Reset width to default value. More...

Standard_Boolean	HasMaterial () const
	Returns true if the Interactive Object has a setting for material. More...

virtual Graphic3d_NameOfMaterial	Material () const
	Returns the current material setting as enumeration value. More...

virtual void	SetMaterial (const Graphic3d_MaterialAspect &aName)
	Sets the material aMat defining this display attribute for the interactive object. Material aspect determines shading aspect, color and transparency of visible entities. More...

virtual void	UnsetMaterial ()
	Removes the setting for material. More...

Standard_Boolean	IsTransparent () const
	Returns true if there is a transparency setting. More...

virtual Standard_Real	Transparency () const
	Returns the transparency setting. This will be between 0.0 and 1.0. At 0.0 an object will be totally opaque, and at 1.0, fully transparent. More...

virtual void	SetTransparency (const Standard_Real aValue=0.6)
	Attributes a setting aValue for transparency. The transparency value should be between 0.0 and 1.0. At 0.0 an object will be totally opaque, and at 1.0, fully transparent. Warning At a value of 1.0, there may be nothing visible. More...

virtual void	UnsetTransparency ()
	Removes the transparency setting. The object is opaque by default. More...

virtual Standard_Boolean	HasPolygonOffsets () const
	Returns Standard_True if <myDrawer> has non-null shading aspect. More...

virtual void	PolygonOffsets (Standard_Integer &aMode, Standard_ShortReal &aFactor, Standard_ShortReal &aUnits) const
	Retrieves current polygon offsets settings from <myDrawer>. More...

virtual void	SetPolygonOffsets (const Standard_Integer aMode, const Standard_ShortReal aFactor=1.0, const Standard_ShortReal aUnits=0.0)
	Sets up polygon offsets for this object. More...

virtual void	UnsetAttributes ()
	Clears settings provided by the drawing tool aDrawer. More...

void	ToBeUpdated (TColStd_ListOfInteger &ListOfMode) const
	gives the list of modes which are flagged "to be updated". More...

void	SetClipPlanes (const Graphic3d_SequenceOfHClipPlane &thePlanes)

void	SetTransformPersistence (const Graphic3d_TransModeFlags theMode, const gp_Pnt &thePoint=gp_Pnt(0.0, 0.0, 0.0))
	Sets up Transform Persistence Mode for this object. This function used to lock in object position, rotation and / or zooming relative to camera position. Object will be drawn in the origin setted by thePoint parameter (except Graphic3d_TMF_TriedronPers flag. More...

Graphic3d_TransModeFlags	GetTransformPersistenceMode () const
	Gets Transform Persistence Mode for this object. More...

gp_Pnt	GetTransformPersistencePoint () const
	Gets point of transform persistence for this object. More...

Standard_Boolean	ToPropagateVisualState () const
	Get value of the flag "propagate visual state" It means that the display/erase/color visual state is propagated automatically to all children; by default, the flag is true. More...

void	SetPropagateVisualState (const Standard_Boolean theFlag)
	Change the value of the flag "propagate visual state". More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Protected Types
enum	GeometryType { GeometryType_UndefShapes, GeometryType_Edge, GeometryType_Face, GeometryType_Points, GeometryType_Edges, GeometryType_Faces, GeometryType_EdgeFace, GeometryType_EdgeVertex }
	Geometry type defines type of shapes on which the dimension is to be built. Some type of geometry allows automatic plane computing and can be built without user-defined plane Another types can't be built without user-defined plane. More...

enum	LabelPosition { LabelPosition_None = 0x00, LabelPosition_Left = 0x01, LabelPosition_Right = 0x02, LabelPosition_HCenter = 0x04, LabelPosition_HMask = LabelPosition_Left \| LabelPosition_Right \| LabelPosition_HCenter, LabelPosition_Above = 0x10, LabelPosition_Below = 0x20, LabelPosition_VCenter = 0x40, LabelPosition_VMask = LabelPosition_Above \| LabelPosition_Below \| LabelPosition_VCenter }
	Specifies supported at base level horizontal and vertical label positions for drawing extension lines and centered text. More...

enum	ValueType { ValueType_Computed, ValueType_CustomReal, ValueType_CustomText }

Protected Member Functions
Standard_Real	ValueToDisplayUnits () const

TCollection_ExtendedString	GetValueString (Standard_Real &theWidth) const
	Get formatted value string and its model space width. More...

void	DrawArrow (const Handle< Prs3d_Presentation > &thePresentation, const gp_Pnt &theLocation, const gp_Dir &theDirection)
	Performs drawing of 2d or 3d arrows on the working plane. More...

void	drawText (const Handle< Prs3d_Presentation > &thePresentation, const gp_Pnt &theTextPos, const gp_Dir &theTextDir, const TCollection_ExtendedString &theText, const Standard_Integer theLabelPosition)
	Performs drawing of 2d or 3d text on the working plane. More...

void	DrawExtension (const Handle< Prs3d_Presentation > &thePresentation, const Standard_Real theExtensionSize, const gp_Pnt &theExtensionStart, const gp_Dir &theExtensionDir, const TCollection_ExtendedString &theLabelString, const Standard_Real theLabelWidth, const Standard_Integer theMode, const Standard_Integer theLabelPosition)
	Performs computing of dimension linear extension with text. More...

void	DrawLinearDimension (const Handle< Prs3d_Presentation > &thePresentation, const Standard_Integer theMode, const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, const Standard_Boolean theIsOneSide=Standard_False)
	Performs computing of linear dimension (for length, diameter, radius and so on). Please note that this method uses base dimension properties, like working plane flyout length, drawer attributes. More...

virtual void	ComputeFlyoutLinePoints (const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, gp_Pnt &theLineBegPoint, gp_Pnt &theLineEndPoint)
	Computes points bounded the flyout line for linear dimension. More...

void	ComputeLinearFlyouts (const Handle< SelectMgr_Selection > &theSelection, const Handle< SelectMgr_EntityOwner > &theOwner, const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint)
	Compute selection sensitives for linear dimension flyout lines (length, diameter, radius). Please note that this method uses base dimension properties: working plane and flyout length. More...

Standard_Boolean	InitCircularDimension (const TopoDS_Shape &theShape, gp_Circ &theCircle, gp_Pnt &theMiddleArcPoint, Standard_Boolean &theIsClosed)
	Performs initialization of circle and middle arc point from the passed shape which is assumed to contain circular geometry. More...

void	PointsForArrow (const gp_Pnt &thePeakPnt, const gp_Dir &theDirection, const gp_Dir &thePlane, const Standard_Real theArrowLength, const Standard_Real theArrowAngle, gp_Pnt &theSidePnt1, gp_Pnt &theSidePnt2)
	Produce points for triangular arrow face. More...

gp_Pnt	GetTextPositionForLinear (const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, const Standard_Boolean theIsOneSide=Standard_False) const
	Compute point of text position for dimension parameters for linear kinds of dimensions (length, radius, diameter). More...

void	FitTextAlignmentForLinear (const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, const Standard_Boolean theIsOneSide, const Prs3d_DimensionTextHorizontalPosition &theHorizontalTextPos, Standard_Integer &theLabelPosition, Standard_Boolean &theIsArrowsExternal) const
	Fits text alignment relatively to the dimension line. More...

Standard_Boolean	AdjustParametersForLinear (const gp_Pnt &theTextPos, const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, Standard_Real &theExtensionSize, Prs3d_DimensionTextHorizontalPosition &theAlignment, Standard_Real &theFlyout, gp_Pln &thePlane, Standard_Boolean &theIsPlaneOld) const
	Adjusts aspect parameters according the text position: extension size, vertical text alignment and flyout. More...

Behavior to implement
virtual Standard_Boolean	CheckPlane (const gp_Pln &) const
	Override this method to check if user-defined plane is valid for the dimension geometry. More...

virtual Standard_Real	ComputeValue () const
	Override this method to computed value of dimension. More...

virtual void	ComputeFlyoutSelection (const Handle< SelectMgr_Selection > &, const Handle< SelectMgr_EntityOwner > &)
	Override this method to compute selection primitives for flyout lines (if the dimension provides it). This callback is a only a part of base selection computation routine. More...

virtual void	ComputeSelection (const Handle< SelectMgr_Selection > &theSelection, const Standard_Integer theMode) override
	Base procedure of computing selection (based on selection geometry data). More...

Protected Member Functions inherited from AIS_InteractiveObject
	AIS_InteractiveObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
	The TypeOfPresention3d means that the interactive object may have a presentation dependant of the view of Display. More...

Protected Member Functions inherited from SelectMgr_SelectableObject
	SelectMgr_SelectableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
	Protected empty constructor. More...

void	setGlobalSelMode (const Standard_Integer theMode)
	Override global selection mode. More...

virtual void	UpdateClipping () override
	Update clipping planes state. More...

virtual void	updateSelection (const Standard_Integer theMode)
	Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated. More...

Protected Member Functions inherited from PrsMgr_PresentableObject
void	Update (Standard_Boolean theToIncludeHidden=Standard_False)
	Recomputes all presentations of the object. More...

void	Update (Standard_Integer theMode, Standard_Boolean theToClearOther)
	Recomputes the presentation in the given mode. More...

	PrsMgr_PresentableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
	Protected empty constructor. More...

virtual	~PrsMgr_PresentableObject ()
	Destructor. More...

virtual void	Fill (const Handle< PrsMgr_PresentationManager > &thePrsMgr, const Handle< PrsMgr_Presentation > &thePrs, const Standard_Integer theMode)
	Fills the given 3D view presentation for specified display mode using Compute() method. In addition, configures other properties of presentation (transformation, clipping planes). More...

virtual void	Compute (const Handle< PrsMgr_PresentationManager > &thePrsMgr, const Handle< Prs3d_Presentation > &thePrs, const Standard_Integer theMode)=0
	Calculates the 3D view presentation for specified display mode. This is a key interface for implementing Presentable Object interface. More...

virtual void	Compute (const Handle< Prs3d_Projector > &theProjector, const Handle< Prs3d_Presentation > &thePrs)
	Calculates the 3D view presentation. Each of the views in the viewer and every modification such as rotation, for example, entails recalculation. It must be redefined to implement hidden line removal for the object. The user never calls this method himself. This is done via the InteractiveContext object and is dependent on the point of view from which the object is displayed. More...

virtual void	Compute (const Handle< Prs3d_Projector > &theProjector, const Handle< Geom_Transformation > &theTrsf, const Handle< Prs3d_Presentation > &thePrs)
	Calculates the 3D view presentation. A point of view is provided by the projector, and the geometric transformation which has transformed associated presentable objects is specified by transformation. This function is to be used in case where a hidden line removal display cannot be calculated automatically. This occurs when associated presentable objects have been transformed geometrically, but not translated. Warning! The transformation must be applied to the object before computation. More...

Standard_Boolean	UpdatePresentations (Standard_Boolean theToIncludeHidden=Standard_False)
	Recomputes invalidated presentations of the object. More...

virtual void	SetCombinedParentTransform (const Handle< Geom_Transformation > &theTrsf)
	Sets myCombinedParentTransform to theTransformation. Thus object receives transformation from parent node and able to derive its own. More...

virtual void	setLocalTransformation (const Handle< Geom_Transformation > &theTransformation)
	Sets local transformation to theTransformation. More...

void	recomputeComputed () const
	Recompute computed (HLR) presentations (when view is in computed mode). More...

void	replaceAspects (const Graphic3d_MapOfAspectsToAspects &theMap)
	Replace aspects of existing (computed) presentation groups, so that the new aspects can be applied without recomputing presentation. It is NOT recommended approach, because user has to fill such map and then search for each occurrence in computed groups. The recommended approach is computing presentation with necessary customized aspects, and then modify them directly followed by SynchronizeAspects() call. More...

Static Protected Member Functions
Static auxilliary methods for geometry extraction
static Standard_Boolean	CircleFromPlanarFace (const TopoDS_Face &theFace, Handle< Geom_Curve > &theCurve, gp_Pnt &theFirstPoint, gp_Pnt &theLastPoint)
	If it is possible extracts circle from planar face. More...

static Standard_Boolean	CircleFromEdge (const TopoDS_Edge &theEdge, gp_Circ &theCircle, gp_Pnt &theFirstPoint, gp_Pnt &theLastPoint)
	If it is possible extracts circle from the edge. More...

Static Protected Member Functions inherited from PrsMgr_PresentableObject
static const gp_Trsf &	getIdentityTrsf ()
	Return the identity transformation. More...

Protected Attributes
Selection geometry
struct AIS_Dimension::SelectionGeometry	mySelectionGeom
	Sensitive point tolerance for 2d text selection. More...

Standard_Real	mySelToleranceForText2d
	Sensitive point tolerance for 2d text selection. More...

Value properties
ValueType	myValueType
	type of value (computed or user-defined) More...

Standard_Real	myCustomValue
	type of value (computed or user-defined) More...

TCollection_ExtendedString	myCustomStringValue
	Value of the dimension (computed or user-defined). More...

Fixed text position properties
gp_Pnt	myFixedTextPosition
	Stores text position fixed by user. More...

Standard_Boolean	myIsTextPositionFixed
	Is the text label position fixed by user. More...

Units properties
Standard_ExtCharacter	mySpecialSymbol
	Special symbol. More...

AIS_DisplaySpecialSymbol	myDisplaySpecialSymbol
	Special symbol display options. More...

Protected Attributes inherited from AIS_InteractiveObject
AIS_InteractiveContext *	myCTXPtr
	pointer to Interactive Context, where object is currently displayed; More...

Handle< Standard_Transient >	myOwner
	application-specific owner object More...

Protected Attributes inherited from SelectMgr_SelectableObject
SelectMgr_SequenceOfSelection	myselections
	list of selections More...

Handle< Prs3d_Presentation >	mySelectionPrs
	optional presentation for highlighting selected object More...

Handle< Prs3d_Presentation >	myHilightPrs
	optional presentation for highlighting detected object More...

Standard_Integer	myGlobalSelMode
	global selection mode More...

Standard_Integer	mycurrent
	[deprecated] iterator value More...

Standard_Boolean	myAutoHilight
	auto-highlighting flag defining More...

Protected Attributes inherited from PrsMgr_PresentableObject
PrsMgr_PresentableObject *	myParent
	pointer to the parent object More...

PrsMgr_Presentations	myPresentations
	list of presentations More...

Handle< Graphic3d_SequenceOfHClipPlane >	myClipPlanes
	sequence of object-specific clipping planes More...

Handle< Prs3d_Drawer >	myDrawer
	main presentation attributes More...

Handle< Prs3d_Drawer >	myHilightDrawer
	(optional) custom presentation attributes for highlighting selected object More...

Handle< Prs3d_Drawer >	myDynHilightDrawer
	(optional) custom presentation attributes for highlighting detected object More...

Handle< Graphic3d_TransformPers >	myTransformPersistence
	transformation persistence More...

Handle< Geom_Transformation >	myLocalTransformation
	local transformation relative to parent object More...

Handle< Geom_Transformation >	myTransformation
	absolute transformation of this object (combined parents + local transformations) More...

Handle< Geom_Transformation >	myCombinedParentTransform
	transformation of parent object (combined for all parents) More...

PrsMgr_ListOfPresentableObjects	myChildren
	list of children More...

gp_GTrsf	myInvTransformation
	inversion of absolute transformation (combined parents + local transformations) More...

PrsMgr_TypeOfPresentation3d	myTypeOfPresentation3d
	presentation type More...

Aspect_TypeOfFacingModel	myCurrentFacingModel
	current facing model More...

Standard_ShortReal	myOwnWidth
	custom width value More...

Standard_Boolean	hasOwnColor
	own color flag More...

Standard_Boolean	hasOwnMaterial
	own material flag More...

Standard_Boolean	myInfiniteState
	infinite flag More...

Standard_Boolean	myIsMutable
	mutable flag More...

Standard_Boolean	myHasOwnPresentations
	flag indicating if object should have own presentations More...

Standard_Boolean	myToPropagateVisualState
	flag indicating if visual state (display/erase/color) should be propagated to all children More...

Geometrical properties
GeometryType	myGeometryType
	defines type of shapes on which the dimension is to be built. More...

gp_Pln	myPlane
	Plane where dimension will be built (computed or user defined). More...

Standard_Boolean	myIsPlaneCustom
	Is plane defined by user (otherwise it will be computed automatically). More...

Standard_Real	myFlyout
	Flyout distance. More...

Standard_Boolean	myIsGeometryValid
	Is dimension geometry properly defined. More...

Additional Inherited Members
Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

AIS_Dimension is a base class for 2D presentations of linear (length, diameter, radius) and angular dimensions.

The dimensions provide measurement of quantities, such as lengths or plane angles. The measurement of dimension "value" is done in model space "as is". These "value" are said to be represented in "model units", which can be specified by user. During the display the measured value converted from "model units" to "display units". The display and model units are stored in common Prs3d_Drawer (drawer of the context) to share it between all dimensions. The specified by user units are stored in the dimension's drawer.

As a drawing, the dimension is composed from the following components:

Attachment (binding) points. The points where the dimension lines attaches to, for length dimensions the distances are measured between these points.
Main dimension line. The which extends from the attachment points in "up" direction, and which contains text label on it with value string.
Flyouts. The lines connecting the attachment points with main dimension line.
Extension. The lines used to extend the main dimension line in the cases when text or arrows do not fit into the main dimension line due to their size.
Arrows.

 Linear dimensions:

 extension
  line                                     arrow
      -->|------- main dimension line -------|<--
         |                                   |
         |flyout                       flyout|
         |                                   |
         +-----------------------------------+
attachment                                attachment
 point                                       point

 Angular dimensions:

                 extension
                    line
                       -->|+++++
                    arrow |     +++
                          |        90(deg) - main dimension line
                   flyout |         +++
                          |           +
                          o---flyout---
                        center         ^ 
                        point          | extension
                                         line

Being a 2D drawings, the dimensions are created on imaginary plane, called "dimension plane", which can be thought of as reference system of axes (X,Y,N) for constructing the presentation.

The role of axes of the dimension plane is to guide you through the encapsualted automations of presentation building to help you understand how is the presentation will look and how it will be oriented in model space during construction.

Orientation of dimension line in model space relatively to the base shapes is defined with the flyouts. Flyouts specify length of flyout lines and their orientation relatively to the attachment points on the working plane. For linear dimensions: Direction of flyouts is specified with direction of main dimension line (vector from the first attachment to the second attachment) and the normal of the dimension plane. Positive direction of flyouts is defined by vector multiplication: AttachVector * PlaneNormal. For angular dimensions: Flyouts are defined by vectors from the center point to the attachment points. These vectors directions are supposed to be the positive directions of flyouts. Negative flyouts directions means that these vectors should be reversed (and dimension will be built out of the angle constructed with center and two attach points).

The dimension plane can be constructed automatically by application (where possible, it depends on the measured geometry). It can be also set by user. However, if the user-defined plane does not fit the geometry of the dimension (attach points do not belong to it), the dimension could not be built. If it is not possible to compute automatic plane (for example, in case of length between two points) the user is supposed to specify the custom plane.

Since the dimensions feature automated construction procedures from an arbitrary shapes, the interfaces to check the validness are also implemented. Once the measured geometry is specified, the one can inquire the validness status by calling "IsValid()" method. If the result is TRUE, then all of public parameters should be pre-computed and ready. The presentation should be also computable. Otherwise, the parameters may return invalid values. In this case, the presentation will not be computed and displayed.

The dimension support two local selection modes: main dimension line selection and text label selection. These modes can be used to develop interactive modification of dimension presentations. The component highlighting in these selection modes is provided by AIS_DimensionOwner class. Please note that selection is unavailable until the presentation is computed.

The specific drawing attributes are controlled through Prs3d_DimensionAspect. The one can change color, arrows, text and arrow style and specify positioning of value label by setting corresponding values to the aspect.

Such set of parameters that consists of:

flyout size and direction,
user-defined dimension plane,
horizontal and vertical text alignment can be uniquely replaced with text position in 3d space. Therefore, there are methods to convert this set of parameters to the text position and vice versa:
If the fixed text position is defined by user, called SetTextPosition (theTextPos) method converts this 3d point to the set of parameters including adjusting of the dimension plane (this plane will be automatic plane, NOT user-defined one). If the fixed text position is set, the flag myIsFixedTextPosition is set to TRUE. ATTENSION! myIsFixedTextPosition fixes all parameters of the set from recomputing inside SetMeasureGeometry() methods. Parameters in dimension aspect (they are horizontal text position and extension size) are adjusted on presentation computing step, user-defined values in dimension aspect are not changed. But plane and flyout as dimension position parameters are changed by SetTextPosition() method according with user-defined text position. If parameters from the set are changed by user with calls of setters, it leads to disabling of fixed text position (myIsFixedTextPosition is set to FALSE). If the fixed text position is set and geometry is changed by user (SetMeasureGeometry() method is called) and the geometry doesn't satisfy computed dimension plane, the dimension is not valid.
If the set of parameters was set by user (may be without the user-defined plane or with it), it can be converted to the text position by calling the method GetTextPosition(). In this case the text position is NOT fixed, and SetMeasureGeometry() without user-defined plane adjusts the automatic plane according input geometry (if it is possible).

Member Enumeration Documentation

◆ ComputeMode

enum AIS_Dimension::ComputeMode

Specifies supported presentation compute modes. Used to compute only parts of presentation for advanced highlighting.

Enumerator
ComputeMode_All	"0" is reserved as neutral mode
ComputeMode_Line	corresponds to selection mode
ComputeMode_Text	corresponds to selection mode

◆ GeometryType

enum AIS_Dimension::GeometryType

protected

Geometry type defines type of shapes on which the dimension is to be built. Some type of geometry allows automatic plane computing and can be built without user-defined plane Another types can't be built without user-defined plane.

Enumerator
GeometryType_UndefShapes
GeometryType_Edge
GeometryType_Face
GeometryType_Points
GeometryType_Edges
GeometryType_Faces
GeometryType_EdgeFace
GeometryType_EdgeVertex

◆ LabelPosition

enum AIS_Dimension::LabelPosition

protected

Specifies supported at base level horizontal and vertical label positions for drawing extension lines and centered text.

Enumerator
LabelPosition_None
LabelPosition_Left
LabelPosition_Right
LabelPosition_HCenter
LabelPosition_HMask
LabelPosition_Above
LabelPosition_Below
LabelPosition_VCenter
LabelPosition_VMask

◆ ValueType

enum AIS_Dimension::ValueType

protected

Enumerator
ValueType_Computed
ValueType_CustomReal
ValueType_CustomText

Constructor & Destructor Documentation

◆ AIS_Dimension()

AIS_Dimension::AIS_Dimension ( const AIS_KindOfDimension theType )

Constructor with default parameters values.

Parameters

theType [in] the type of dimension.

Member Function Documentation

◆ AcceptDisplayMode()

virtual Standard_Boolean AIS_Dimension::AcceptDisplayMode ( const Standard_Integer theMode ) const

inlineoverridevirtual

Returns true if the class of objects accepts the display mode theMode. The interactive context can have a default mode of representation for the set of Interactive Objects. This mode may not be accepted by object.

Reimplemented from PrsMgr_PresentableObject.

◆ AdjustParametersForLinear()

Standard_Boolean AIS_Dimension::AdjustParametersForLinear	(	const gp_Pnt &	theTextPos,
		const gp_Pnt &	theFirstPoint,
		const gp_Pnt &	theSecondPoint,
		Standard_Real &	theExtensionSize,
		Prs3d_DimensionTextHorizontalPosition &	theAlignment,
		Standard_Real &	theFlyout,
		gp_Pln &	thePlane,
		Standard_Boolean &	theIsPlaneOld
	)		const

protected

Adjusts aspect parameters according the text position: extension size, vertical text alignment and flyout.

Parameters

theTextPos	[in] the user defined 3d point of text position
theFirstPoint	[in] the first point of linear measurement.
theSecondPoint	[in] the second point of linear measurement.
theExtensionSize	[out] the adjusted extension size
theAlignment	[out] the horizontal label alignment.
theFlyout	[out] the adjusted value of flyout.
thePlane	[out] the new plane that contains theTextPos and attachment points.
theIsPlaneOld	[out] shows if new plane is computed.

◆ CheckPlane()

virtual Standard_Boolean AIS_Dimension::CheckPlane ( const gp_Pln & ) const

inlineprotectedvirtual

Override this method to check if user-defined plane is valid for the dimension geometry.

Parameters

thePlane [in] the working plane for positioning every dimension in the application.

Returns: true is the plane is suitable for building dimension with computed dimension geometry.

Reimplemented in AIS_AngleDimension, AIS_LengthDimension, AIS_DiameterDimension, and AIS_RadiusDimension.

◆ CircleFromEdge()

static Standard_Boolean AIS_Dimension::CircleFromEdge	(	const TopoDS_Edge &	theEdge,
		gp_Circ &	theCircle,
		gp_Pnt &	theFirstPoint,
		gp_Pnt &	theLastPoint
	)

staticprotected

If it is possible extracts circle from the edge.

Parameters

theEdge	[in] input edge to extract circle from
theCircle	[out] circle
theFirstPoint	[out] the point of the first parameter of the circlular curve
theSecondPoint	[out] the point of the last parameter of the circlular curve

Returns: TRUE in case of successful circle extraction.

◆ CircleFromPlanarFace()

static Standard_Boolean AIS_Dimension::CircleFromPlanarFace	(	const TopoDS_Face &	theFace,
		Handle< Geom_Curve > &	theCurve,
		gp_Pnt &	theFirstPoint,
		gp_Pnt &	theLastPoint
	)

staticprotected

If it is possible extracts circle from planar face.

Parameters

theFace	[in] the planar face
theCurve	[out] the circular curve
theFirstPoint	[out] the point of the first parameter of the circlular curve
theSecondPoint	[out] the point of the last parameter of the circlular curve

Returns: TRUE in case of successful circle extraction

◆ ComputeFlyoutLinePoints()

virtual void AIS_Dimension::ComputeFlyoutLinePoints	(	const gp_Pnt &	theFirstPoint,
		const gp_Pnt &	theSecondPoint,
		gp_Pnt &	theLineBegPoint,
		gp_Pnt &	theLineEndPoint
	)

protectedvirtual

Computes points bounded the flyout line for linear dimension.

Parameters

theFirstPoint	[in] the first attach point of linear dimension.
theSecondPoint	[in] the second attach point of linear dimension.
theLineBegPoint	[out] the first attach point of linear dimension.
theLineEndPoint	[out] the second attach point of linear dimension.

Reimplemented in AIS_LengthDimension.

◆ ComputeFlyoutSelection()

virtual void AIS_Dimension::ComputeFlyoutSelection	(	const Handle< SelectMgr_Selection > &	,
		const Handle< SelectMgr_EntityOwner > &
	)

inlineprotectedvirtual

Override this method to compute selection primitives for flyout lines (if the dimension provides it). This callback is a only a part of base selection computation routine.

Reimplemented in AIS_AngleDimension, AIS_LengthDimension, and AIS_DiameterDimension.

◆ ComputeLinearFlyouts()

void AIS_Dimension::ComputeLinearFlyouts	(	const Handle< SelectMgr_Selection > &	theSelection,
		const Handle< SelectMgr_EntityOwner > &	theOwner,
		const gp_Pnt &	theFirstPoint,
		const gp_Pnt &	theSecondPoint
	)

protected

Compute selection sensitives for linear dimension flyout lines (length, diameter, radius). Please note that this method uses base dimension properties: working plane and flyout length.

Parameters

theSelection	[in] the selection structure to fill with selection primitives.
theOwner	[in] the selection entity owner.
theFirstPoint	[in] the first attach point of linear dimension.
theSecondPoint	[in] the second attach point of linear dimension.

◆ ComputeSelection()

virtual void AIS_Dimension::ComputeSelection	(	const Handle< SelectMgr_Selection > &	theSelection,
		const Standard_Integer	theMode
	)

overrideprotectedvirtual

Base procedure of computing selection (based on selection geometry data).

Parameters

theSelection	[in] the selection structure to will with primitives.
theMode	[in] the selection mode.

Implements SelectMgr_SelectableObject.

◆ ComputeValue()

virtual Standard_Real AIS_Dimension::ComputeValue ( ) const

inlineprotectedvirtual

Override this method to computed value of dimension.

Returns: value from the measured geometry.

Reimplemented in AIS_AngleDimension, AIS_LengthDimension, AIS_DiameterDimension, and AIS_RadiusDimension.

◆ DimensionAspect()

Handle< Prs3d_DimensionAspect > AIS_Dimension::DimensionAspect ( ) const

inline

Gets the dimension aspect from AIS object drawer. Dimension aspect contains aspects of line, text and arrows for dimension presentation.

◆ DisplaySpecialSymbol()

AIS_DisplaySpecialSymbol AIS_Dimension::DisplaySpecialSymbol ( ) const

inline

Returns: dimension special symbol display options.

◆ DrawArrow()

void AIS_Dimension::DrawArrow	(	const Handle< Prs3d_Presentation > &	thePresentation,
		const gp_Pnt &	theLocation,
		const gp_Dir &	theDirection
	)

protected

Performs drawing of 2d or 3d arrows on the working plane.

Parameters

theLocation	[in] the location of the arrow tip.
theDirection	[in] the direction from the tip to the bottom of the arrow.

◆ DrawExtension()

void AIS_Dimension::DrawExtension	(	const Handle< Prs3d_Presentation > &	thePresentation,
		const Standard_Real	theExtensionSize,
		const gp_Pnt &	theExtensionStart,
		const gp_Dir &	theExtensionDir,
		const TCollection_ExtendedString &	theLabelString,
		const Standard_Real	theLabelWidth,
		const Standard_Integer	theMode,
		const Standard_Integer	theLabelPosition
	)

protected

Performs computing of dimension linear extension with text.

Parameters

thePresentation	[in] the presentation to fill with graphical primitives.
theExtensionSize	[in] the size of extension line.
theExtensionStart	[in] the point where extension line connects to dimension.
theExtensionDir	[in] the direction of extension line.
theLabelString	[in] the string with value.
theLabelWidth	[in] the geometrical width computed for value string.
theMode	[in] the display mode.
theLabelPosition	[in] position flags for the text label.

◆ DrawLinearDimension()

void AIS_Dimension::DrawLinearDimension	(	const Handle< Prs3d_Presentation > &	thePresentation,
		const Standard_Integer	theMode,
		const gp_Pnt &	theFirstPoint,
		const gp_Pnt &	theSecondPoint,
		const Standard_Boolean	theIsOneSide = `Standard_False`
	)

protected

Performs computing of linear dimension (for length, diameter, radius and so on). Please note that this method uses base dimension properties, like working plane flyout length, drawer attributes.

Parameters

thePresentation	[in] the presentation to fill with primitives.
theMode	[in] the presentation compute mode.
theFirstPoint	[in] the first attach point of linear dimension.
theSecondPoint	[in] the second attach point of linear dimension.
theIsOneSide	[in] specifies whether the dimension has only one flyout line.

◆ drawText()

void AIS_Dimension::drawText	(	const Handle< Prs3d_Presentation > &	thePresentation,
		const gp_Pnt &	theTextPos,
		const gp_Dir &	theTextDir,
		const TCollection_ExtendedString &	theText,
		const Standard_Integer	theLabelPosition
	)

protected

Performs drawing of 2d or 3d text on the working plane.

Parameters

theTextPos	[in] the position of the text label.
theTestDir	[in] the direction of the text label.
theText	[in] the text label string.
theLabelPosition	[in] the text label vertical and horizontal positioning option respectively to the main dimension line.

Returns: text width relative to the dimension working plane. For 2d text this value will be zero.

◆ FitTextAlignmentForLinear()

void AIS_Dimension::FitTextAlignmentForLinear	(	const gp_Pnt &	theFirstPoint,
		const gp_Pnt &	theSecondPoint,
		const Standard_Boolean	theIsOneSide,
		const Prs3d_DimensionTextHorizontalPosition &	theHorizontalTextPos,
		Standard_Integer &	theLabelPosition,
		Standard_Boolean &	theIsArrowsExternal
	)		const

protected

Fits text alignment relatively to the dimension line.

Parameters

theFirstPoint	[in] the first attachment point.
theSecondPoint	[in] the second attachment point.
theIsOneSide	[in] is the arrow displayed only on the one side of the dimension.
theHorizontalTextPos	[in] the text horizontal position (alignment).
theLabelPosition	[out] the label position, contains bits that defines vertical and horizontal alignment. (for internal usage in count text position)
theIsArrowExternal	[out] is the arrows external, if arrow orientation in the dimension aspect is Prs3d_DAO_Fit, it fits arrow orientation automatically.

◆ GetCustomValue()

const TCollection_ExtendedString& AIS_Dimension::GetCustomValue ( ) const

Gets user-defined dimension value.

Returns: dimension value string.

◆ GetDisplayUnits()

virtual const TCollection_AsciiString& AIS_Dimension::GetDisplayUnits ( ) const

virtual

Reimplemented in AIS_AngleDimension, AIS_LengthDimension, AIS_DiameterDimension, and AIS_RadiusDimension.

◆ GetFlyout()

Standard_Real AIS_Dimension::GetFlyout ( ) const

inline

Returns: flyout value for dimension.

◆ GetGeometryType()

Standard_Integer AIS_Dimension::GetGeometryType ( ) const

inline

Geometry type defines type of shapes on which the dimension is to be built.

Returns: type of geometry on which the dimension will be built.

◆ GetModelUnits()

virtual const TCollection_AsciiString& AIS_Dimension::GetModelUnits ( ) const

virtual

Reimplemented in AIS_AngleDimension, AIS_LengthDimension, AIS_DiameterDimension, and AIS_RadiusDimension.

◆ GetPlane()

const gp_Pln& AIS_Dimension::GetPlane ( ) const

Get the dimension plane in which the 2D dimension presentation is computed. By default, if plane is not defined by user, it is computed automatically after dimension geometry is computed. If computed dimension geometry (points) can't be placed on the user-defined plane, dimension geometry was set as invalid (validity flag is set to false) and dimension presentation will not be computed. If user-defined plane allow geometry placement on it, it will be used for computing of the dimension presentation.

Returns: dimension plane used for presentation computing.

◆ GetTextPosition()

virtual const gp_Pnt AIS_Dimension::GetTextPosition ( ) const

inlinevirtual

Computes absolute text position from dimension parameters (flyout, plane and text alignment).

Reimplemented in AIS_AngleDimension, AIS_LengthDimension, AIS_DiameterDimension, and AIS_RadiusDimension.

◆ GetTextPositionForLinear()

gp_Pnt AIS_Dimension::GetTextPositionForLinear	(	const gp_Pnt &	theFirstPoint,
		const gp_Pnt &	theSecondPoint,
		const Standard_Boolean	theIsOneSide = `Standard_False`
	)		const

protected

Compute point of text position for dimension parameters for linear kinds of dimensions (length, radius, diameter).

◆ GetValue()

Standard_Real AIS_Dimension::GetValue ( ) const

inline

Gets dimension measurement value. If the value to display is not specified by user, then the dimension object is responsible to compute it on its own in model space coordinates.

Returns: the dimension value (in model units) which is used during display of the presentation.

◆ GetValueString()

TCollection_ExtendedString AIS_Dimension::GetValueString ( Standard_Real & theWidth ) const

protected

Get formatted value string and its model space width.

Parameters

theWidth [out] the model space with of the string.

Returns: formatted dimension value string.

◆ InitCircularDimension()

Standard_Boolean AIS_Dimension::InitCircularDimension	(	const TopoDS_Shape &	theShape,
		gp_Circ &	theCircle,
		gp_Pnt &	theMiddleArcPoint,
		Standard_Boolean &	theIsClosed
	)

protected

Performs initialization of circle and middle arc point from the passed shape which is assumed to contain circular geometry.

Parameters

theShape	[in] the shape to explore.
theCircle	[out] the circle geometry.
theMiddleArcPoint	[out] the middle point of the arc.
theIsClosed	[out] returns TRUE if the geometry is closed circle.

Returns: TRUE if the the circle is successfully got from the input shape.

◆ IsTextPositionCustom()

Standard_Boolean AIS_Dimension::IsTextPositionCustom ( ) const

inline

Returns: TRUE if text position is set by user with method SetTextPosition().

◆ IsValid()

virtual Standard_Boolean AIS_Dimension::IsValid ( ) const

inlinevirtual

Check that the input geometry for dimension is valid and the presentation can be successfully computed.

Returns: TRUE if dimension geometry is ok.

◆ KindOfDimension()

AIS_KindOfDimension AIS_Dimension::KindOfDimension ( ) const

inline

Returns: the kind of dimension.

◆ PointsForArrow()

void AIS_Dimension::PointsForArrow	(	const gp_Pnt &	thePeakPnt,
		const gp_Dir &	theDirection,
		const gp_Dir &	thePlane,
		const Standard_Real	theArrowLength,
		const Standard_Real	theArrowAngle,
		gp_Pnt &	theSidePnt1,
		gp_Pnt &	theSidePnt2
	)

protected

Produce points for triangular arrow face.

Parameters

thePeakPnt	[in] the arrow peak position.
theDirection	[in] the arrow direction.
thePlane	[in] the face plane.
theArrowLength	[in] the length of arrow.
theArrowAngle	[in] the angle of arrow.
theSidePnt1	[out] the first side point.
theSidePnt2	[out] the second side point.

◆ SelToleranceForText2d()

Standard_Real AIS_Dimension::SelToleranceForText2d ( ) const

inline

Returns selection tolerance for text2d: For 2d text selection detection sensitive point with tolerance is used Important! Only for 2d text.

◆ SetComputedValue()

void AIS_Dimension::SetComputedValue ( )

inline

Sets computed dimension value. Resets custom value mode if it was set.

◆ SetCustomPlane()

virtual void AIS_Dimension::SetCustomPlane ( const gp_Pln & thePlane )

virtual

Sets user-defined plane where the 2D dimension presentation will be placed. Checks validity of this plane if geometry has been set already. Validity of the plane is checked according to the geometry set and has different criteria for different kinds of dimensions.

◆ SetCustomValue() [1/2]

void AIS_Dimension::SetCustomValue ( const Standard_Real theValue )

Sets user-defined dimension value. The user-defined dimension value is specified in model space, and affect by unit conversion during the display.

Parameters

theValue [in] the user-defined value to display.

◆ SetCustomValue() [2/2]

void AIS_Dimension::SetCustomValue ( const TCollection_ExtendedString & theValue )

Sets user-defined dimension value. Unit conversion during the display is not applyed.

Parameters

theValue [in] the user-defined value to display.

◆ SetDimensionAspect()

void AIS_Dimension::SetDimensionAspect ( const Handle< Prs3d_DimensionAspect > & theDimensionAspect )

Sets new dimension aspect for the interactive object drawer. The dimension aspect provides dynamic properties which are generally used during computation of dimension presentations.

◆ SetDisplaySpecialSymbol()

void AIS_Dimension::SetDisplaySpecialSymbol ( const AIS_DisplaySpecialSymbol theDisplaySpecSymbol )

Specifies whether to display special symbol or not.

◆ SetDisplayUnits()

virtual void AIS_Dimension::SetDisplayUnits ( const TCollection_AsciiString & )

inlinevirtual

Reimplemented in AIS_AngleDimension, AIS_LengthDimension, AIS_DiameterDimension, and AIS_RadiusDimension.

◆ SetFlyout()

void AIS_Dimension::SetFlyout ( const Standard_Real theFlyout )

Sets flyout value for dimension.

◆ SetModelUnits()

virtual void AIS_Dimension::SetModelUnits ( const TCollection_AsciiString & )

inlinevirtual

Reimplemented in AIS_AngleDimension, AIS_LengthDimension, AIS_DiameterDimension, and AIS_RadiusDimension.

◆ SetSelToleranceForText2d()

void AIS_Dimension::SetSelToleranceForText2d ( const Standard_Real theTol )

Sets selection tolerance for text2d: For 2d text selection detection sensitive point with tolerance is used to change this tolerance use this method Important! Only for 2d text.

◆ SetSpecialSymbol()

void AIS_Dimension::SetSpecialSymbol ( const Standard_ExtCharacter theSpecialSymbol )

Specifies special symbol.

◆ SetTextPosition()

virtual void AIS_Dimension::SetTextPosition ( const gp_Pnt & )

inlinevirtual

Fixes the absolute text position and adjusts flyout, plane and text alignment according to it. Updates presentation if the text position is valid. ATTENTION! It does not change vertical text alignment.

Parameters

theTextPos [in] the point of text position.

Reimplemented in AIS_AngleDimension, AIS_LengthDimension, AIS_DiameterDimension, and AIS_RadiusDimension.

◆ SpecialSymbol()

Standard_ExtCharacter AIS_Dimension::SpecialSymbol ( ) const

inline

Returns: special symbol.

◆ Type()

virtual AIS_KindOfInteractive AIS_Dimension::Type ( ) const

inlineoverridevirtual

Returns: the kind of interactive.

Reimplemented from AIS_InteractiveObject.

◆ UnsetCustomPlane()

void AIS_Dimension::UnsetCustomPlane ( )

inline

Unsets user-defined plane. Therefore the plane for dimension will be computed automatically.

◆ UnsetFixedTextPosition()

void AIS_Dimension::UnsetFixedTextPosition ( )

Unsets user defined text positioning and enables text positioning by other parameters: text alignment, extension size, flyout and custom plane.

◆ ValueToDisplayUnits()

Standard_Real AIS_Dimension::ValueToDisplayUnits ( ) const

protected

Field Documentation

◆ myCustomStringValue

TCollection_ExtendedString AIS_Dimension::myCustomStringValue

protected

Value of the dimension (computed or user-defined).

◆ myCustomValue

Standard_Real AIS_Dimension::myCustomValue

protected

type of value (computed or user-defined)

Value of the dimension (computed or user-defined).

◆ myDisplaySpecialSymbol

AIS_DisplaySpecialSymbol AIS_Dimension::myDisplaySpecialSymbol

protected

Special symbol display options.

◆ myFixedTextPosition

gp_Pnt AIS_Dimension::myFixedTextPosition

protected

Stores text position fixed by user.

◆ myFlyout

Standard_Real AIS_Dimension::myFlyout

protected

Flyout distance.

◆ myGeometryType

GeometryType AIS_Dimension::myGeometryType

protected

defines type of shapes on which the dimension is to be built.

◆ myIsGeometryValid

Standard_Boolean AIS_Dimension::myIsGeometryValid

protected

Is dimension geometry properly defined.

◆ myIsPlaneCustom

Standard_Boolean AIS_Dimension::myIsPlaneCustom

protected

Is plane defined by user (otherwise it will be computed automatically).

◆ myIsTextPositionFixed

Standard_Boolean AIS_Dimension::myIsTextPositionFixed

protected

Is the text label position fixed by user.

◆ myPlane

gp_Pln AIS_Dimension::myPlane

protected

Plane where dimension will be built (computed or user defined).

◆ mySelectionGeom

struct AIS_Dimension::SelectionGeometry AIS_Dimension::mySelectionGeom

protected

Sensitive point tolerance for 2d text selection.

◆ mySelToleranceForText2d

Standard_Real AIS_Dimension::mySelToleranceForText2d

protected

Sensitive point tolerance for 2d text selection.

◆ mySpecialSymbol

Standard_ExtCharacter AIS_Dimension::mySpecialSymbol

protected

Special symbol.

◆ myValueType

ValueType AIS_Dimension::myValueType

protected

type of value (computed or user-defined)

Value of the dimension (computed or user-defined).

The documentation for this class was generated from the following file:

AIS_Dimension.hxx

AIS_Dimension Class Reference

Data Structures

Public Types

Public Member Functions

Protected Types

Protected Member Functions

Static Protected Member Functions

Protected Attributes

Geometrical properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ ComputeMode

◆ GeometryType

◆ LabelPosition

◆ ValueType

Constructor & Destructor Documentation

◆ AIS_Dimension()

Member Function Documentation

◆ AcceptDisplayMode()

◆ AdjustParametersForLinear()

◆ CheckPlane()

◆ CircleFromEdge()

◆ CircleFromPlanarFace()

◆ ComputeFlyoutLinePoints()

◆ ComputeFlyoutSelection()

◆ ComputeLinearFlyouts()

◆ ComputeSelection()

◆ ComputeValue()

◆ DimensionAspect()

◆ DisplaySpecialSymbol()

◆ DrawArrow()

◆ DrawExtension()

◆ DrawLinearDimension()

◆ drawText()

◆ FitTextAlignmentForLinear()

◆ GetCustomValue()

◆ GetDisplayUnits()

◆ GetFlyout()

◆ GetGeometryType()

◆ GetModelUnits()

◆ GetPlane()

◆ GetTextPosition()

◆ GetTextPositionForLinear()

◆ GetValue()

◆ GetValueString()

◆ InitCircularDimension()

◆ IsTextPositionCustom()

◆ IsValid()

◆ KindOfDimension()

◆ PointsForArrow()

◆ SelToleranceForText2d()

◆ SetComputedValue()

◆ SetCustomPlane()

◆ SetCustomValue() [1/2]

◆ SetCustomValue() [2/2]

◆ SetDimensionAspect()

◆ SetDisplaySpecialSymbol()

◆ SetDisplayUnits()

◆ SetFlyout()

◆ SetModelUnits()

◆ SetSelToleranceForText2d()

◆ SetSpecialSymbol()

◆ SetTextPosition()

◆ SpecialSymbol()

◆ Type()

◆ UnsetCustomPlane()

◆ UnsetFixedTextPosition()

◆ ValueToDisplayUnits()

Field Documentation

◆ myCustomStringValue

◆ myCustomValue

◆ myDisplaySpecialSymbol

◆ myFixedTextPosition

◆ myFlyout

◆ myGeometryType

◆ myIsGeometryValid

◆ myIsPlaneCustom

◆ myIsTextPositionFixed

◆ myPlane