The algorithm is based on the General Fuse algorithm (GFA). The result of GFA is all split parts of the Arguments.
More...

#include <BOPAlgo_CellsBuilder.hxx>

Inheritance diagram for BOPAlgo_CellsBuilder:

[legend]

Public Member Functions
	BOPAlgo_CellsBuilder ()

	BOPAlgo_CellsBuilder (const Handle< NCollection_BaseAllocator > &theAllocator)

virtual	~BOPAlgo_CellsBuilder ()

virtual void	Clear () override
	Redefined method Clear - clears the contents. More...

void	AddToResult (const TopTools_ListOfShape &theLSToTake, const TopTools_ListOfShape &theLSToAvoid, const Standard_Integer theMaterial=0, const Standard_Boolean theUpdate=Standard_False)
	Adding the parts to result. The parts are defined by two lists of shapes: <theLSToTake> defines the arguments which parts should be taken into result; <theLSToAvoid> defines the arguments which parts should not be taken into result; To be taken into result the part must be IN for all shapes from the list <theLSToTake> and must be OUT of all shapes from the list <theLSToAvoid>. More...

void	AddAllToResult (const Standard_Integer theMaterial=0, const Standard_Boolean theUpdate=Standard_False)
	Add all split parts to result. <theMaterial> defines the removal of internal boundaries; <theUpdate> parameter defines whether to remove boundaries now or not. More...

void	RemoveFromResult (const TopTools_ListOfShape &theLSToTake, const TopTools_ListOfShape &theLSToAvoid)
	Removing the parts from result. The parts are defined by two lists of shapes: <theLSToTake> defines the arguments which parts should be removed from result; <theLSToAvoid> defines the arguments which parts should not be removed from result. To be removed from the result the part must be IN for all shapes from the list <theLSToTake> and must be OUT of all shapes from the list <theLSToAvoid>. More...

void	RemoveAllFromResult ()
	Remove all parts from result. More...

void	RemoveInternalBoundaries ()
	Removes internal boundaries between cells with the same material. If the result contains the cells with same material but of different dimension the removal of internal boundaries between these cells will not be performed. In case of some errors during the removal the method will set the appropriate warning status - use GetReport() to access them. More...

const TopoDS_Shape &	GetAllParts () const
	Get all split parts. More...

void	MakeContainers ()
	Makes the Containers of proper type from the parts added to result. More...

Public Member Functions inherited from BOPAlgo_Builder
	BOPAlgo_Builder ()
	Empty constructor. More...

virtual	~BOPAlgo_Builder ()

	BOPAlgo_Builder (const Handle< NCollection_BaseAllocator > &theAllocator)

BOPAlgo_PPaveFiller	PPaveFiller ()
	Returns the PaveFiller, algorithm for sub-shapes intersection. More...

BOPDS_PDS	PDS ()
	Returns the Data Structure, holder of intersection information. More...

Handle< IntTools_Context >	Context () const
	Returns the Context, tool for cashing heavy algorithms. More...

virtual void	AddArgument (const TopoDS_Shape &theShape)
	Adds the argument to the operation. More...

virtual void	SetArguments (const TopTools_ListOfShape &theLS)
	Sets the list of arguments for the operation. More...

const TopTools_ListOfShape &	Arguments () const
	Returns the list of arguments. More...

void	SetNonDestructive (const Standard_Boolean theFlag)
	Sets the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated. This flag is taken into account if internal PaveFiller is used only. In the case of calling PerformWithFiller the corresponding flag of that PaveFiller is in force. More...

Standard_Boolean	NonDestructive () const
	Returns the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated. More...

void	SetGlue (const BOPAlgo_GlueEnum theGlue)
	Sets the glue option for the algorithm. More...

BOPAlgo_GlueEnum	Glue () const
	Returns the glue option of the algorithm. More...

void	SetCheckInverted (const Standard_Boolean theCheck)
	Enables/Disables the check of the input solids for inverted status. More...

Standard_Boolean	CheckInverted () const
	Returns the flag defining whether the check for input solids on inverted status should be performed or not. More...

virtual void	Perform () override
	Performs the operation. The intersection will be performed also. More...

virtual void	PerformWithFiller (const BOPAlgo_PaveFiller &theFiller)
	Performs the operation with the prepared filler. The intersection will not be performed in this case. More...

virtual void	BuildBOP (const TopTools_ListOfShape &theObjects, const TopAbs_State theObjState, const TopTools_ListOfShape &theTools, const TopAbs_State theToolsState, Handle< Message_Report > theReport=NULL)
	Builds the result shape according to the given states for the objects and tools. These states can be unambiguously converted into the Boolean operation type. Thus, it performs the Boolean operation on the given groups of shapes. More...

void	BuildBOP (const TopTools_ListOfShape &theObjects, const TopTools_ListOfShape &theTools, const BOPAlgo_Operation theOperation, Handle< Message_Report > theReport=NULL)
	Builds the result of Boolean operation of given type basing on the result of Builder operation (GF or any other). More...

const TopTools_DataMapOfShapeListOfShape &	Images () const
	Returns the map of images. More...

const TopTools_DataMapOfShapeListOfShape &	Origins () const
	Returns the map of origins. More...

const TopTools_DataMapOfShapeShape &	ShapesSD () const
	Returns the map of Same Domain (SD) shapes - coinciding shapes from different arguments. More...

Public Member Functions inherited from BOPAlgo_BuilderShape
const TopoDS_Shape &	Shape () const
	Returns the result of algorithm. More...

const TopTools_ListOfShape &	Modified (const TopoDS_Shape &theS)
	Returns the list of shapes Modified from the shape theS. More...

const TopTools_ListOfShape &	Generated (const TopoDS_Shape &theS)
	Returns the list of shapes Generated from the shape theS. More...

Standard_Boolean	IsDeleted (const TopoDS_Shape &theS)
	Returns true if the shape theS has been deleted. In this case the shape will have no Modified elements, but can have Generated elements. More...

Standard_Boolean	HasModified () const
	Returns true if any of the input shapes has been modified during operation. More...

Standard_Boolean	HasGenerated () const
	Returns true if any of the input shapes has generated shapes during operation. More...

Standard_Boolean	HasDeleted () const
	Returns true if any of the input shapes has been deleted during operation. More...

Handle< BRepTools_History >	History ()
	History Tool. More...

void	SetToFillHistory (const Standard_Boolean theHistFlag)
	Allows disabling the history collection. More...

Standard_Boolean	HasHistory () const
	Returns flag of history availability. More...

Public Member Functions inherited from BOPAlgo_Options
	BOPAlgo_Options ()
	Empty constructor. More...

	BOPAlgo_Options (const Handle< NCollection_BaseAllocator > &theAllocator)
	Constructor with allocator. More...

virtual	~BOPAlgo_Options ()
	Destructor. More...

const Handle< NCollection_BaseAllocator > &	Allocator () const
	Returns allocator. More...

void	AddError (const Handle< Message_Alert > &theAlert)
	Adds the alert as error (fail) More...

void	AddWarning (const Handle< Message_Alert > &theAlert)
	Adds the alert as warning. More...

Standard_Boolean	HasErrors () const
	Returns true if algorithm has failed. More...

Standard_Boolean	HasError (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated error of specified type. More...

Standard_Boolean	HasWarnings () const
	Returns true if algorithm has generated some warning alerts. More...

Standard_Boolean	HasWarning (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated warning of specified type. More...

const Handle< Message_Report > &	GetReport () const
	Returns report collecting all errors and warnings. More...

void	DumpErrors (Standard_OStream &theOS) const
	Dumps the error status into the given stream. More...

void	DumpWarnings (Standard_OStream &theOS) const
	Dumps the warning statuses into the given stream. More...

void	ClearWarnings ()
	Clears the warnings of the algorithm. More...

void	SetFuzzyValue (const Standard_Real theFuzz)
	Sets the additional tolerance. More...

Standard_Real	FuzzyValue () const
	Returns the additional tolerance. More...

void	SetProgressIndicator (const Handle< Message_ProgressIndicator > &theObj)
	Set the Progress Indicator object. More...

void	SetUseOBB (const Standard_Boolean theUseOBB)
	Enables/Disables the usage of OBB. More...

Standard_Boolean	UseOBB () const
	Returns the flag defining usage of OBB. More...

void	SetRunParallel (const Standard_Boolean theFlag)
	Set the flag of parallel processing if <theFlag> is true the parallel processing is switched on if <theFlag> is false the parallel processing is switched off. More...

Standard_Boolean	RunParallel () const
	Returns the flag of parallel processing. More...

Protected Member Functions
virtual const TopTools_ListOfShape *	LocModified (const TopoDS_Shape &theS) override
	Prepare information for history support taking into account local modification map of unified elements - myMapModified. More...

virtual void	PerformInternal1 (const BOPAlgo_PaveFiller &thePF) override
	Redefined method PerformInternal1 - makes all split parts, nullifies the result <myShape>, and index all parts. More...

void	IndexParts ()
	Indexes the parts for quick access to the arguments. More...

void	FindParts (const TopTools_ListOfShape &theLSToTake, const TopTools_ListOfShape &theLSToAvoid, TopTools_ListOfShape &theParts)
	Looking for the parts defined by two lists. More...

Standard_Boolean	RemoveInternals (const TopTools_ListOfShape &theLS, TopTools_ListOfShape &theLSNew, const TopTools_MapOfShape &theMapKeepBnd=TopTools_MapOfShape())
	Removes internal boundaries between cells with the same material. Returns TRUE if any internal boundaries have been removed. More...

Protected Member Functions inherited from BOPAlgo_Builder
void	PrepareHistory ()
	Prepare information for history support. More...

virtual const TopTools_ListOfShape &	LocGenerated (const TopoDS_Shape &theS)
	Returns the list of shapes generated from the shape theS. Similarly to LocModified must be redefined for specific operations, obtaining Generated elements differently. More...

virtual void	PerformInternal (const BOPAlgo_PaveFiller &thePF)
	Performs the building of the result. The method calls the PerfromInternal1() method surrounded by a try-catch block. More...

virtual void	BuildResult (const TopAbs_ShapeEnum theType)
	Builds the result of operation. The method is called for each of the arguments type and adds into the result the splits of the arguments of that type. More...

virtual void	CheckData () override
	Checks the input data. More...

void	CheckFiller ()
	Checks if the intersection algorithm has Errors/Warnings. More...

virtual void	Prepare ()
	Prepares the result shape by making it empty compound. More...

void	FillImagesVertices ()
	Fills the images of vertices. More...

void	FillImagesEdges ()
	Fills the images of edges. More...

void	FillImagesContainers (const TopAbs_ShapeEnum theType)
	Fills the images of containers (WIRES/SHELLS/COMPSOLID). More...

void	FillImagesContainer (const TopoDS_Shape &theS, const TopAbs_ShapeEnum theType)
	Builds the image of the given container using the splits of its sub-shapes. More...

void	FillImagesFaces ()
	Fills the images of faces. The method consists of three steps: More...

virtual void	BuildSplitFaces ()
	Builds the splits of faces using the information from the intersection stage stored in Data Structure. More...

void	FillSameDomainFaces ()
	Looks for the same domain faces among the splits of the faces. Updates the map of images with SD faces. More...

void	FillInternalVertices ()
	Classifies the alone vertices on faces relatively its splits and adds them as INTERNAL into the splits. More...

void	FillImagesSolids ()
	Fills the images of solids. The method consists of four steps: More...

void	BuildDraftSolid (const TopoDS_Shape &theSolid, TopoDS_Shape &theDraftSolid, TopTools_ListOfShape &theLIF)
	Builds the draft solid by rebuilding the shells of the solid with the splits of faces. More...

virtual void	FillIn3DParts (TopTools_DataMapOfShapeShape &theDraftSolids)
	Finds faces located inside each solid. More...

void	BuildSplitSolids (TopTools_DataMapOfShapeShape &theDraftSolids)
	Builds the splits of the solids using their draft versions and faces located inside. More...

void	FillInternalShapes ()
	Classifies the vertices and edges from the arguments relatively splits of solids and makes them INTERNAL for solids. More...

void	FillImagesCompounds ()
	Fills the images of compounds. More...

void	FillImagesCompound (const TopoDS_Shape &theS, TopTools_MapOfShape &theMF)
	Builds the image of the given compound. More...

virtual void	PostTreat ()
	Post treatment of the result of the operation. The method checks validity of the sub-shapes of the result and updates the tolerances to make them valid. More...

Protected Member Functions inherited from BOPAlgo_BuilderShape
	BOPAlgo_BuilderShape ()
	Empty constructor. More...

	BOPAlgo_BuilderShape (const Handle< NCollection_BaseAllocator > &theAllocator)
	Constructor with allocator. More...

Protected Member Functions inherited from BOPAlgo_Algo
	BOPAlgo_Algo ()
	Default constructor. More...

virtual	~BOPAlgo_Algo ()

	BOPAlgo_Algo (const Handle< NCollection_BaseAllocator > &theAllocator)

virtual void	CheckResult ()
	Checks the obtained result. More...

Protected Member Functions inherited from BOPAlgo_Options
void	UserBreak () const
	Breaks the execution if the break signal is indicated by myProgressIndicator. More...

Protected Attributes
TopoDS_Shape	myAllParts
	All split parts of the arguments. More...

TopTools_IndexedDataMapOfShapeListOfShape	myIndex
	Connection map from all splits parts to the argument shapes from which they were created. More...

TopTools_DataMapOfIntegerListOfShape	myMaterials
	Map of assigned materials (material -> list of shape) More...

TopTools_DataMapOfShapeInteger	myShapeMaterial
	Map of assigned materials (shape -> material) More...

TopTools_DataMapOfShapeShape	myMapModified
	Local modification map to track unification of the splits. More...

Protected Attributes inherited from BOPAlgo_Builder
TopTools_ListOfShape	myArguments
	Arguments of the operation. More...

TopTools_MapOfShape	myMapFence
	Fence map providing the uniqueness of the shapes in the list of arguments. More...

BOPAlgo_PPaveFiller	myPaveFiller
	Pave Filler - algorithm for sub-shapes intersection. More...

BOPDS_PDS	myDS
	Data Structure - holder of intersection information. More...

Handle< IntTools_Context >	myContext
	Context - tool for cashing heavy algorithms such as Projectors and Classifiers. More...

Standard_Integer	myEntryPoint
	EntryPoint - controls the deletion of the PaveFiller, which could live longer than the Builder. More...

TopTools_DataMapOfShapeListOfShape	myImages
	Images - map of Images of the sub-shapes of arguments. More...

TopTools_DataMapOfShapeShape	myShapesSD
	ShapesSD - map of SD Shapes. More...

TopTools_DataMapOfShapeListOfShape	myOrigins
	Origins - map of Origins, back map of Images. More...

TopTools_DataMapOfShapeListOfShape	myInParts
	InParts - map of own and acquired IN faces of the arguments solids. More...

Standard_Boolean	myNonDestructive
	Safe processing option allows avoiding modification of the input shapes. More...

BOPAlgo_GlueEnum	myGlue
	Gluing option allows speeding up the intersection of the input shapes. More...

Standard_Boolean	myCheckInverted
	Check inverted option allows disabling the check of input solids on inverted status. More...

Protected Attributes inherited from BOPAlgo_BuilderShape
TopoDS_Shape	myShape
	Result of the operation. More...

TopTools_ListOfShape	myHistShapes
	Storer for the history shapes. More...

TopTools_MapOfShape	myMapShape
	Cashed map of all arguments shapes. More...

Standard_Boolean	myFillHistory
	Controls the history filling. More...

Handle< BRepTools_History >	myHistory
	History tool. More...

Protected Attributes inherited from BOPAlgo_Options
Handle< NCollection_BaseAllocator >	myAllocator
	Enables/Disables the usage of OBB. More...

Handle< Message_Report >	myReport
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myRunParallel
	Enables/Disables the usage of OBB. More...

Standard_Real	myFuzzyValue
	Enables/Disables the usage of OBB. More...

Handle< Message_ProgressIndicator >	myProgressIndicator
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myUseOBB
	Enables/Disables the usage of OBB. More...

Additional Inherited Members
Static Public Member Functions inherited from BOPAlgo_Options
static Standard_Boolean	GetParallelMode ()
	Gets the global parallel mode. More...

static void	SetParallelMode (const Standard_Boolean theNewMode)
	Sets the global parallel mode. More...

Detailed Description

The algorithm is based on the General Fuse algorithm (GFA). The result of GFA is all split parts of the Arguments.

The purpose of this algorithm is to provide the result with the content of:

Cells (parts) defined by the user;
Internal boundaries defined by the user.

In other words the algorithm should provide the possibility for the user to add or remove any part to (from) result and remove any internal boundaries between parts.

Requirements for the Data:
All the requirements of GFA for the DATA are inherited in this algorithm - The arguments could be of any type (dimension) and should be valid in terms of BRepCheck_Analyzer and BOPAlgo_ArgumentAnalyzer.

Results:
The result of the algorithm is compound containing selected parts of the basic types (VERTEX, EDGE, FACE or SOLID). The default result is empty compound. It is possible to add any split part to the result by using the methods AddToRessult() and AddAllToResult(). It is also possible to remove any part from the result by using methods RemoveFromResult() and RemoveAllFromResult(). The method RemoveAllFromResult() is also suitable for clearing the result.

To remove Internal boundaries it is necessary to set the same material to the parts between which the boundaries should be removed and call the method RemoveInternalBoundaries(). The material should not be equal to 0, as this is default material value. The boundaries between parts with this value will not be removed. One part cannot be added with the different materials. It is also possible to remove the boundaries during combining the result. To do this it is necessary to set the material for parts (not equal to 0) and set the flag bUpdate to TRUE. For the arguments of the types FACE or EDGE it is recommended to remove the boundaries in the end when the result is completely built. It will help to avoid self-intersections in the result.
Note, that if the result contains the parts with same material but of different dimension the boundaries between such parts will not be removed. Currently, the removal of the internal boundaries between multi-dimensional shapes is not supported.

It is possible to create typed Containers from the parts added to result by using method MakeContainers(). The type of the containers will depend on the type of the arguments: WIRES for EEDGE, SHELLS for FACES and COMPSOLIDS for SOLIDS. The result will be compound containing containers. Adding of the parts to such result will not update containers. The result compound will contain the containers and new added parts (of basic type). Removing of the parts from such result may affect some containers if the parts that should be removed is in container. In this case this container will be rebuilt without that part.

History:
The algorithm supports history information for basic types of the shapes - VERTEX, EDGE, FACE. This information available through the methods IsDeleted() and Modified().
In DRAW Test Harness it is available through the same commands as for Boolean Operations (bmodified, bgenerated and bisdeleted).

The algorithm can return the following Error Statuses:

Error status acquired in the General Fuse algorithm. The Error status can be checked with HasErrors() method. If the Error status is not equal to zero, the result cannot be trustworthy.

The algorithm can set the following Warning Statuses:

Warning status acquired in the General Fuse algorithm;
BOPAlgo_AlertRemovalOfIBForMDimShapes
BOPAlgo_AlertRemovalOfIBForFacesFailed
BOPAlgo_AlertRemovalOfIBForEdgesFailed
BOPAlgo_AlertRemovalOfIBForSolidsFailed

The Warning status can be checked with HasWarnings() method or printed with the DumpWarnings() method. If warnings are recorded, the result may be not as expected.

Examples:

API
BOPAlgo_CellsBuilder aCBuilder;
TopTools_ListOfShape aLS = ...; // arguments
/* parallel or single mode (the default value is FALSE)*/
Standard_Boolean bRunParallel = Standard_False;
/* fuzzy option (default value is 0)*/
Standard_Real aTol = 0.0;
//
aCBuilder.SetArguments(aLS);
aCBuilder.SetRunParallel(bRunParallel);
aCBuilder.SetFuzzyValue(aTol);
//
aCBuilder.Perform();
if (aCBuilder.HasErrors()) { // check error status
return;
}
/* empty compound, as nothing has been added yet */
const TopoDS_Shape& aRes = aCBuilder.Shape();
/* all split parts */
const TopoDS_Shape& aRes = aCBuilder.GetAllParts();
//
TopTools_ListOfShape aLSToTake = ...; // parts of these arguments will be taken into result
TopTools_ListOfShape aLSToAvoid = ...; // parts of these arguments will not be taken into result
//
/* defines the material common for the cells, i.e. the boundaries between cells with the same material will be removed.
By default it is set to 0. Thus, to remove some boundary the value of this variable should not be equal to 0 */
Standard_Integer iMaterial = ...;
/* defines whether to update the result right now or not */
Standard_Boolean bUpdate = ...;
// adding to result
aCBuilder.AddToResult(aLSToTake, aLSToAvoid, iMaterial, bUpdate);
aR = aCBuilder.Shape(); // the result
// removing of the boundaries (should be called only if bUpdate is false)
aCBuilder.RemoveInternalBoundaries();
//
// removing from result
aCBuilder.AddAllToResult();
aCBuilder.RemoveFromResult(aLSToTake, aLSToAvoid);
aR = aCBuilder.Shape(); // the result
DRAW Test Harness
psphere s1 15
psphere s2 15
psphere s3 15
ttranslate s1 0 0 10
ttranslate s2 20 0 10
ttranslate s3 10 0 0
# adding arguments
bclearobjects; bcleartools
baddobjects s1 s2 s3
# intersection
bfillds
# rx will contain all split parts
bcbuild rx
# add to result the part that is common for all three spheres
bcadd res s1 1 s2 1 s3 1 -m 1
# add to result the part that is common only for first and third spheres
bcadd res s1 1 s2 0 s3 1 -m 1
# remove internal boundaries
bcremoveint res

Constructor & Destructor Documentation

◆ BOPAlgo_CellsBuilder() [1/2]

BOPAlgo_CellsBuilder::BOPAlgo_CellsBuilder ( )

◆ BOPAlgo_CellsBuilder() [2/2]

BOPAlgo_CellsBuilder::BOPAlgo_CellsBuilder ( const Handle< NCollection_BaseAllocator > & theAllocator )

◆ ~BOPAlgo_CellsBuilder()

virtual BOPAlgo_CellsBuilder::~BOPAlgo_CellsBuilder ( )

virtual

Member Function Documentation

◆ AddAllToResult()

void BOPAlgo_CellsBuilder::AddAllToResult	(	const Standard_Integer	theMaterial = `0`,
		const Standard_Boolean	theUpdate = `Standard_False`
	)

Add all split parts to result.
<theMaterial> defines the removal of internal boundaries;
<theUpdate> parameter defines whether to remove boundaries now or not.

◆ AddToResult()

void BOPAlgo_CellsBuilder::AddToResult	(	const TopTools_ListOfShape &	theLSToTake,
		const TopTools_ListOfShape &	theLSToAvoid,
		const Standard_Integer	theMaterial = `0`,
		const Standard_Boolean	theUpdate = `Standard_False`
	)

Adding the parts to result.
The parts are defined by two lists of shapes:
<theLSToTake> defines the arguments which parts should be taken into result;
<theLSToAvoid> defines the arguments which parts should not be taken into result;
To be taken into result the part must be IN for all shapes from the list <theLSToTake> and must be OUT of all shapes from the list <theLSToAvoid>.

To remove internal boundaries between any cells in the result <theMaterial> variable should be used. The boundaries between cells with the same material will be removed. Default value is 0.
Thus, to remove any boundary the value of this variable should not be equal to 0.
<theUpdate> parameter defines whether to remove boundaries now or not.

◆ Clear()

virtual void BOPAlgo_CellsBuilder::Clear ( )

overridevirtual

Redefined method Clear - clears the contents.

Reimplemented from BOPAlgo_Builder.

◆ FindParts()

void BOPAlgo_CellsBuilder::FindParts	(	const TopTools_ListOfShape &	theLSToTake,
		const TopTools_ListOfShape &	theLSToAvoid,
		TopTools_ListOfShape &	theParts
	)

protected

Looking for the parts defined by two lists.

◆ GetAllParts()

const TopoDS_Shape& BOPAlgo_CellsBuilder::GetAllParts ( ) const

Get all split parts.

◆ IndexParts()

void BOPAlgo_CellsBuilder::IndexParts ( )

protected

Indexes the parts for quick access to the arguments.

◆ LocModified()

virtual const TopTools_ListOfShape* BOPAlgo_CellsBuilder::LocModified ( const TopoDS_Shape & theS )

overrideprotectedvirtual

Prepare information for history support taking into account local modification map of unified elements - myMapModified.

Reimplemented from BOPAlgo_Builder.

◆ MakeContainers()

void BOPAlgo_CellsBuilder::MakeContainers ( )

Makes the Containers of proper type from the parts added to result.

◆ PerformInternal1()

virtual void BOPAlgo_CellsBuilder::PerformInternal1 ( const BOPAlgo_PaveFiller & thePF )

overrideprotectedvirtual

Redefined method PerformInternal1 - makes all split parts, nullifies the result <myShape>, and index all parts.

Reimplemented from BOPAlgo_Builder.

◆ RemoveAllFromResult()

void BOPAlgo_CellsBuilder::RemoveAllFromResult ( )

Remove all parts from result.

◆ RemoveFromResult()

void BOPAlgo_CellsBuilder::RemoveFromResult	(	const TopTools_ListOfShape &	theLSToTake,
		const TopTools_ListOfShape &	theLSToAvoid
	)

Removing the parts from result.
The parts are defined by two lists of shapes:
<theLSToTake> defines the arguments which parts should be removed from result;
<theLSToAvoid> defines the arguments which parts should not be removed from result.
To be removed from the result the part must be IN for all shapes from the list <theLSToTake> and must be OUT of all shapes from the list <theLSToAvoid>.

◆ RemoveInternalBoundaries()

void BOPAlgo_CellsBuilder::RemoveInternalBoundaries ( )

Removes internal boundaries between cells with the same material.
If the result contains the cells with same material but of different dimension the removal of internal boundaries between these cells will not be performed.
In case of some errors during the removal the method will set the appropriate warning status - use GetReport() to access them.

◆ RemoveInternals()

Standard_Boolean BOPAlgo_CellsBuilder::RemoveInternals	(	const TopTools_ListOfShape &	theLS,
		TopTools_ListOfShape &	theLSNew,
		const TopTools_MapOfShape &	theMapKeepBnd = `TopTools_MapOfShape()`
	)

protected

Removes internal boundaries between cells with the same material.
Returns TRUE if any internal boundaries have been removed.

Field Documentation

◆ myAllParts

TopoDS_Shape BOPAlgo_CellsBuilder::myAllParts

protected

All split parts of the arguments.

◆ myIndex

TopTools_IndexedDataMapOfShapeListOfShape BOPAlgo_CellsBuilder::myIndex

protected

Connection map from all splits parts to the argument shapes from which they were created.

◆ myMapModified

TopTools_DataMapOfShapeShape BOPAlgo_CellsBuilder::myMapModified

protected

Local modification map to track unification of the splits.

◆ myMaterials

TopTools_DataMapOfIntegerListOfShape BOPAlgo_CellsBuilder::myMaterials

protected

Map of assigned materials (material -> list of shape)

◆ myShapeMaterial

TopTools_DataMapOfShapeInteger BOPAlgo_CellsBuilder::myShapeMaterial

protected

Map of assigned materials (shape -> material)

The documentation for this class was generated from the following file:

BOPAlgo_CellsBuilder.hxx

BOPAlgo_CellsBuilder Class Reference

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ BOPAlgo_CellsBuilder() [1/2]

◆ BOPAlgo_CellsBuilder() [2/2]

◆ ~BOPAlgo_CellsBuilder()

Member Function Documentation

◆ AddAllToResult()

◆ AddToResult()

◆ Clear()

◆ FindParts()

◆ GetAllParts()

◆ IndexParts()

◆ LocModified()

◆ MakeContainers()

◆ PerformInternal1()

◆ RemoveAllFromResult()

◆ RemoveFromResult()

◆ RemoveInternalBoundaries()

◆ RemoveInternals()

Field Documentation

◆ myAllParts

◆ myIndex

◆ myMapModified

◆ myMaterials

◆ myShapeMaterial