The class contains API level of the General Fuse algorithm.
More...

#include <BRepAlgoAPI_BuilderAlgo.hxx>

Inheritance diagram for BRepAlgoAPI_BuilderAlgo:

[legend]

Public Member Functions
Constructors
	BRepAlgoAPI_BuilderAlgo ()
	Empty constructor. More...

virtual	~BRepAlgoAPI_BuilderAlgo ()
	Empty constructor. More...

	BRepAlgoAPI_BuilderAlgo (const BOPAlgo_PaveFiller &thePF)
	Constructor with prepared Filler object. More...

Setting/Getting data for the algorithm
void	SetArguments (const TopTools_ListOfShape &theLS)
	Sets the arguments. More...

const TopTools_ListOfShape &	Arguments () const
	Gets the arguments. More...

Setting options
void	SetNonDestructive (const Standard_Boolean theFlag)
	Sets the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated. More...

Standard_Boolean	NonDestructive () const
	Returns the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated. More...

void	SetGlue (const BOPAlgo_GlueEnum theGlue)
	Sets the glue option for the algorithm, which allows increasing performance of the intersection of the input shapes. More...

BOPAlgo_GlueEnum	Glue () const
	Returns the glue option of the algorithm. More...

void	SetCheckInverted (const Standard_Boolean theCheck)
	Enables/Disables the check of the input solids for inverted status. More...

Standard_Boolean	CheckInverted () const
	Returns the flag defining whether the check for input solids on inverted status should be performed or not. More...

Performing the operation
virtual void	Build () override
	Performs the algorithm. More...

Result simplification
void	SimplifyResult (const Standard_Boolean theUnifyEdges=Standard_True, const Standard_Boolean theUnifyFaces=Standard_True, const Standard_Real theAngularTol=Precision::Angular())
	Simplification of the result shape is performed by the means of ShapeUpgrade_UnifySameDomain algorithm. The result of the operation will be overwritten with the simplified result. More...

History support
virtual const TopTools_ListOfShape &	Modified (const TopoDS_Shape &theS) override
	Returns the shapes modified from the shape <theS>. If any, the list will contain only those splits of the given shape, contained in the result. More...

virtual const TopTools_ListOfShape &	Generated (const TopoDS_Shape &theS) override
	Returns the list of shapes generated from the shape <theS>. In frames of Boolean Operations algorithms only Edges and Faces could have Generated elements, as only they produce new elements during intersection: More...

virtual Standard_Boolean	IsDeleted (const TopoDS_Shape &aS) override
	Checks if the shape <theS> has been completely removed from the result, i.e. the result does not contain the shape itself and any of its splits. Returns TRUE if the shape has been deleted. More...

virtual Standard_Boolean	HasModified () const
	Returns true if any of the input shapes has been modified during operation. More...

virtual Standard_Boolean	HasGenerated () const
	Returns true if any of the input shapes has generated shapes during operation. More...

virtual Standard_Boolean	HasDeleted () const
	Returns true if any of the input shapes has been deleted during operation. Normally, General Fuse operation should not have Deleted elements, but all derived operation can have. More...

Enabling/Disabling the history collection.
void	SetToFillHistory (const Standard_Boolean theHistFlag)
	Allows disabling the history collection. More...

Standard_Boolean	HasHistory () const
	Returns flag of history availability. More...

Getting the section edges
const TopTools_ListOfShape &	SectionEdges ()
	Returns a list of section edges. The edges represent the result of intersection between arguments of operation. More...

Getting tools performing the job
const BOPAlgo_PPaveFiller &	DSFiller () const
	Returns the Intersection tool. More...

const BOPAlgo_PBuilder &	Builder () const
	Returns the Building tool. More...

Handle< BRepTools_History >	History () const
	History tool. More...

Public Member Functions inherited from BRepAlgoAPI_Algo
virtual const TopoDS_Shape &	Shape () override
	Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built. More...

Public Member Functions inherited from BRepBuilderAPI_MakeShape
	operator TopoDS_Shape ()

Public Member Functions inherited from BRepBuilderAPI_Command
virtual	~BRepBuilderAPI_Command ()

virtual Standard_Boolean	IsDone () const

void	Check () const
	Raises NotDone if done is false. More...

Protected Member Functions
Setting options to the Intersection tool
virtual void	SetAttributes ()
	Sets options (available in child classes) for the intersection tool. Here it does nothing. More...

Protected methods for shapes intersection and building result
void	IntersectShapes (const TopTools_ListOfShape &theArgs)
	Intersects the given shapes with the intersection tool. More...

void	BuildResult ()
	Builds the resulting shape. More...

Clearing the contents of the algorithm
virtual void	Clear () override
	Clears the algorithm from previous runs. More...

Protected Member Functions inherited from BRepAlgoAPI_Algo
	BRepAlgoAPI_Algo ()
	Empty constructor. More...

virtual	~BRepAlgoAPI_Algo ()
	Destructor. More...

	BRepAlgoAPI_Algo (const Handle< NCollection_BaseAllocator > &theAllocator)
	Empty constructor. More...

Protected Member Functions inherited from BRepBuilderAPI_MakeShape
	BRepBuilderAPI_MakeShape ()

Protected Member Functions inherited from BRepBuilderAPI_Command
	BRepBuilderAPI_Command ()
	Set done to False. More...

void	Done ()
	Set done to true. More...

void	NotDone ()
	Set done to false. More...

Protected Member Functions inherited from BOPAlgo_Options
void	UserBreak () const
	Breaks the execution if the break signal is indicated by myProgressIndicator. More...

	BOPAlgo_Options ()
	Empty constructor. More...

	BOPAlgo_Options (const Handle< NCollection_BaseAllocator > &theAllocator)
	Constructor with allocator. More...

virtual	~BOPAlgo_Options ()
	Destructor. More...

const Handle< NCollection_BaseAllocator > &	Allocator () const
	Returns allocator. More...

void	AddError (const Handle< Message_Alert > &theAlert)
	Adds the alert as error (fail) More...

void	AddWarning (const Handle< Message_Alert > &theAlert)
	Adds the alert as warning. More...

Standard_Boolean	HasErrors () const
	Returns true if algorithm has failed. More...

Standard_Boolean	HasError (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated error of specified type. More...

Standard_Boolean	HasWarnings () const
	Returns true if algorithm has generated some warning alerts. More...

Standard_Boolean	HasWarning (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated warning of specified type. More...

const Handle< Message_Report > &	GetReport () const
	Returns report collecting all errors and warnings. More...

void	DumpErrors (Standard_OStream &theOS) const
	Dumps the error status into the given stream. More...

void	DumpWarnings (Standard_OStream &theOS) const
	Dumps the warning statuses into the given stream. More...

void	ClearWarnings ()
	Clears the warnings of the algorithm. More...

void	SetFuzzyValue (const Standard_Real theFuzz)
	Sets the additional tolerance. More...

Standard_Real	FuzzyValue () const
	Returns the additional tolerance. More...

void	SetProgressIndicator (const Handle< Message_ProgressIndicator > &theObj)
	Set the Progress Indicator object. More...

void	SetRunParallel (const Standard_Boolean theFlag)
	Set the flag of parallel processing if <theFlag> is true the parallel processing is switched on if <theFlag> is false the parallel processing is switched off. More...

Standard_Boolean	RunParallel () const
	Returns the flag of parallel processing. More...

void	SetUseOBB (const Standard_Boolean theUseOBB)
	Enables/Disables the usage of OBB. More...

Standard_Boolean	UseOBB () const
	Returns the flag defining usage of OBB. More...

Protected Attributes
Fields
TopTools_ListOfShape	myArguments
	Arguments of the operation. More...

Standard_Boolean	myNonDestructive
	Non-destructive mode management. More...

BOPAlgo_GlueEnum	myGlue
	Gluing mode management. More...

Standard_Boolean	myCheckInverted
	Check for inverted solids management. More...

Standard_Boolean	myFillHistory
	Controls the history collection. More...

Standard_Boolean	myIsIntersectionNeeded
	Flag to control whether the intersection of arguments should be performed or not. More...

BOPAlgo_PPaveFiller	myDSFiller
	Intersection tool performs intersection of the argument shapes. More...

BOPAlgo_PBuilder	myBuilder
	Building tool performs construction of the result basing on the results of intersection. More...

Handle< BRepTools_History >	myHistory
	General History tool, containing all History of shapes modifications during the operation (including result simplification) More...

Handle< BRepTools_History >	mySimplifierHistory
	History of result shape simplification. More...

Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape	myShape

TopTools_ListOfShape	myGenerated

Protected Attributes inherited from BOPAlgo_Options
Handle< NCollection_BaseAllocator >	myAllocator
	Enables/Disables the usage of OBB. More...

Handle< Message_Report >	myReport
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myRunParallel
	Enables/Disables the usage of OBB. More...

Standard_Real	myFuzzyValue
	Enables/Disables the usage of OBB. More...

Handle< Message_ProgressIndicator >	myProgressIndicator
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myUseOBB
	Enables/Disables the usage of OBB. More...

Additional Inherited Members
Static Protected Member Functions inherited from BOPAlgo_Options
static Standard_Boolean	GetParallelMode ()
	Gets the global parallel mode. More...

static void	SetParallelMode (const Standard_Boolean theNewMode)
	Sets the global parallel mode. More...

Detailed Description

The class contains API level of the General Fuse algorithm.

Additionally to the options defined in the base class, the algorithm has the following options:

Safe processing mode - allows to avoid modification of the input shapes during the operation (by default it is off);
Gluing options - allows to speed up the calculation of the intersections on the special cases, in which some sub-shapes are coinciding.
Disabling the check for inverted solids - Disables/Enables the check of the input solids for inverted status (holes in the space). The default value is TRUE, i.e. the check is performed. Setting this flag to FALSE for inverted solids, most likely will lead to incorrect results.
Disabling history collection - allows disabling the collection of the history of shapes modifications during the operation.

It returns the following Error statuses:

0 - in case of success;
BOPAlgo_AlertTooFewArguments - in case there are no enough arguments to perform the operation;
BOPAlgo_AlertIntersectionFailed - in case the intersection of the arguments has failed;
BOPAlgo_AlertBuilderFailed - in case building of the result shape has failed.

Warnings statuses from underlying DS Filler and Builder algorithms are collected in the report.

The class provides possibility to simplify the resulting shape by unification of the tangential edges and faces. It is performed by the method SimplifyResult. See description of this method for more details.

Constructor & Destructor Documentation

◆ BRepAlgoAPI_BuilderAlgo() [1/2]

BRepAlgoAPI_BuilderAlgo::BRepAlgoAPI_BuilderAlgo ( )

Empty constructor.

◆ ~BRepAlgoAPI_BuilderAlgo()

virtual BRepAlgoAPI_BuilderAlgo::~BRepAlgoAPI_BuilderAlgo ( )

virtual

Empty constructor.

◆ BRepAlgoAPI_BuilderAlgo() [2/2]

BRepAlgoAPI_BuilderAlgo::BRepAlgoAPI_BuilderAlgo ( const BOPAlgo_PaveFiller & thePF )

Constructor with prepared Filler object.

Member Function Documentation

◆ Arguments()

const TopTools_ListOfShape& BRepAlgoAPI_BuilderAlgo::Arguments ( ) const

inline

Gets the arguments.

◆ Build()

virtual void BRepAlgoAPI_BuilderAlgo::Build ( )

overridevirtual

Performs the algorithm.

Reimplemented from BRepBuilderAPI_MakeShape.

Reimplemented in BRepAlgoAPI_Section, BRepAlgoAPI_BooleanOperation, and BRepAlgoAPI_Splitter.

◆ Builder()

const BOPAlgo_PBuilder& BRepAlgoAPI_BuilderAlgo::Builder ( ) const

inline

Returns the Building tool.

◆ BuildResult()

void BRepAlgoAPI_BuilderAlgo::BuildResult ( )

protected

Builds the resulting shape.

◆ CheckInverted()

Standard_Boolean BRepAlgoAPI_BuilderAlgo::CheckInverted ( ) const

inline

Returns the flag defining whether the check for input solids on inverted status should be performed or not.

◆ Clear()

virtual void BRepAlgoAPI_BuilderAlgo::Clear ( )

overrideprotectedvirtual

Clears the algorithm from previous runs.

Reimplemented from BOPAlgo_Options.

◆ DSFiller()

const BOPAlgo_PPaveFiller& BRepAlgoAPI_BuilderAlgo::DSFiller ( ) const

inline

Returns the Intersection tool.

◆ Generated()

virtual const TopTools_ListOfShape& BRepAlgoAPI_BuilderAlgo::Generated ( const TopoDS_Shape & theS )

overridevirtual

Returns the list of shapes generated from the shape <theS>. In frames of Boolean Operations algorithms only Edges and Faces could have Generated elements, as only they produce new elements during intersection:

Edges can generate new vertices;
Faces can generate new edges and vertices.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ Glue()

BOPAlgo_GlueEnum BRepAlgoAPI_BuilderAlgo::Glue ( ) const

inline

Returns the glue option of the algorithm.

◆ HasDeleted()

virtual Standard_Boolean BRepAlgoAPI_BuilderAlgo::HasDeleted ( ) const

virtual

Returns true if any of the input shapes has been deleted during operation. Normally, General Fuse operation should not have Deleted elements, but all derived operation can have.

◆ HasGenerated()

virtual Standard_Boolean BRepAlgoAPI_BuilderAlgo::HasGenerated ( ) const

virtual

Returns true if any of the input shapes has generated shapes during operation.

◆ HasHistory()

Standard_Boolean BRepAlgoAPI_BuilderAlgo::HasHistory ( ) const

inline

Returns flag of history availability.

◆ HasModified()

virtual Standard_Boolean BRepAlgoAPI_BuilderAlgo::HasModified ( ) const

virtual

Returns true if any of the input shapes has been modified during operation.

◆ History()

Handle< BRepTools_History > BRepAlgoAPI_BuilderAlgo::History ( ) const

inline

History tool.

◆ IntersectShapes()

void BRepAlgoAPI_BuilderAlgo::IntersectShapes ( const TopTools_ListOfShape & theArgs )

protected

Intersects the given shapes with the intersection tool.

◆ IsDeleted()

virtual Standard_Boolean BRepAlgoAPI_BuilderAlgo::IsDeleted ( const TopoDS_Shape & aS )

overridevirtual

Checks if the shape <theS> has been completely removed from the result, i.e. the result does not contain the shape itself and any of its splits. Returns TRUE if the shape has been deleted.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ Modified()

virtual const TopTools_ListOfShape& BRepAlgoAPI_BuilderAlgo::Modified ( const TopoDS_Shape & theS )

overridevirtual

Returns the shapes modified from the shape <theS>. If any, the list will contain only those splits of the given shape, contained in the result.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ NonDestructive()

Standard_Boolean BRepAlgoAPI_BuilderAlgo::NonDestructive ( ) const

inline

Returns the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated.

◆ SectionEdges()

const TopTools_ListOfShape& BRepAlgoAPI_BuilderAlgo::SectionEdges ( )

Returns a list of section edges. The edges represent the result of intersection between arguments of operation.

◆ SetArguments()

void BRepAlgoAPI_BuilderAlgo::SetArguments ( const TopTools_ListOfShape & theLS )

inline

Sets the arguments.

◆ SetAttributes()

virtual void BRepAlgoAPI_BuilderAlgo::SetAttributes ( )

inlineprotectedvirtual

Sets options (available in child classes) for the intersection tool. Here it does nothing.

Reimplemented in BRepAlgoAPI_Section.

◆ SetCheckInverted()

void BRepAlgoAPI_BuilderAlgo::SetCheckInverted ( const Standard_Boolean theCheck )

inline

Enables/Disables the check of the input solids for inverted status.

◆ SetGlue()

void BRepAlgoAPI_BuilderAlgo::SetGlue ( const BOPAlgo_GlueEnum theGlue )

inline

Sets the glue option for the algorithm, which allows increasing performance of the intersection of the input shapes.

◆ SetNonDestructive()

void BRepAlgoAPI_BuilderAlgo::SetNonDestructive ( const Standard_Boolean theFlag )

inline

Sets the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated.

◆ SetToFillHistory()

void BRepAlgoAPI_BuilderAlgo::SetToFillHistory ( const Standard_Boolean theHistFlag )

inline

Allows disabling the history collection.

◆ SimplifyResult()

void BRepAlgoAPI_BuilderAlgo::SimplifyResult	(	const Standard_Boolean	theUnifyEdges = `Standard_True`,
		const Standard_Boolean	theUnifyFaces = `Standard_True`,
		const Standard_Real	theAngularTol = `Precision::Angular()`
	)

Simplification of the result shape is performed by the means of ShapeUpgrade_UnifySameDomain algorithm. The result of the operation will be overwritten with the simplified result.

The simplification is performed without creation of the Internal shapes, i.e. shapes connections will never be broken.

Simplification is performed on the whole result shape. Thus, if the input shapes contained connected tangent edges or faces unmodified during the operation they will also be unified.

After simplification, the History of result simplification is merged into the main history of operation. So, it is taken into account when asking for Modified, Generated and Deleted shapes.

Some options of the main operation are passed into the Unifier:

Fuzzy tolerance of the operation is given to the Unifier as the linear tolerance.
Non destructive mode here controls the safe input mode in Unifier.

Parameters

theUnifyEdges	Controls the edges unification. TRUE by default.
theUnifyFaces	Controls the faces unification. TRUE by default.
theAngularTol	Angular criteria for tangency of edges and faces. Precision::Angular() by default.

Field Documentation

◆ myArguments

TopTools_ListOfShape BRepAlgoAPI_BuilderAlgo::myArguments

protected

Arguments of the operation.

◆ myBuilder

BOPAlgo_PBuilder BRepAlgoAPI_BuilderAlgo::myBuilder

protected

Building tool performs construction of the result basing on the results of intersection.

◆ myCheckInverted

Standard_Boolean BRepAlgoAPI_BuilderAlgo::myCheckInverted

protected

Check for inverted solids management.

◆ myDSFiller

BOPAlgo_PPaveFiller BRepAlgoAPI_BuilderAlgo::myDSFiller

protected

Intersection tool performs intersection of the argument shapes.

◆ myFillHistory

Standard_Boolean BRepAlgoAPI_BuilderAlgo::myFillHistory

protected

Controls the history collection.

◆ myGlue

BOPAlgo_GlueEnum BRepAlgoAPI_BuilderAlgo::myGlue

protected

Gluing mode management.

◆ myHistory

Handle< BRepTools_History > BRepAlgoAPI_BuilderAlgo::myHistory

protected

General History tool, containing all History of shapes modifications during the operation (including result simplification)

◆ myIsIntersectionNeeded

Standard_Boolean BRepAlgoAPI_BuilderAlgo::myIsIntersectionNeeded

protected

Flag to control whether the intersection of arguments should be performed or not.

◆ myNonDestructive

Standard_Boolean BRepAlgoAPI_BuilderAlgo::myNonDestructive

protected

Non-destructive mode management.

◆ mySimplifierHistory

Handle< BRepTools_History > BRepAlgoAPI_BuilderAlgo::mySimplifierHistory

protected

History of result shape simplification.

The documentation for this class was generated from the following file:

BRepAlgoAPI_BuilderAlgo.hxx

BRepAlgoAPI_BuilderAlgo Class Reference

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ BRepAlgoAPI_BuilderAlgo() [1/2]

◆ ~BRepAlgoAPI_BuilderAlgo()

◆ BRepAlgoAPI_BuilderAlgo() [2/2]

Member Function Documentation

◆ Arguments()

◆ Build()

◆ Builder()

◆ BuildResult()

◆ CheckInverted()

◆ Clear()

◆ DSFiller()

◆ Generated()

◆ Glue()

◆ HasDeleted()

◆ HasGenerated()

◆ HasHistory()

◆ HasModified()

◆ History()

◆ IntersectShapes()

◆ IsDeleted()

◆ Modified()

◆ NonDestructive()

◆ SectionEdges()

◆ SetArguments()

◆ SetAttributes()

◆ SetCheckInverted()

◆ SetGlue()

◆ SetNonDestructive()

◆ SetToFillHistory()

◆ SimplifyResult()

Field Documentation

◆ myArguments

◆ myBuilder

◆ myCheckInverted

◆ myDSFiller

◆ myFillHistory

◆ myGlue

◆ myHistory

◆ myIsIntersectionNeeded

◆ myNonDestructive

◆ mySimplifierHistory