Defines an (Indexed) Set of data corresponding to a complete Transfer by a File Interface, i.e. File Header and Transient Entities (Objects) contained in a File. Contained Entities are identified in the Model by unique and consecutive Numbers. More...

#include <Interface_InterfaceModel.hxx>

Inheritance diagram for Interface_InterfaceModel:

[legend]

Public Member Functions
void	Destroy ()
	Clears the list of entities (service WhenDelete) More...

	~Interface_InterfaceModel ()

void	SetProtocol (const Handle< Interface_Protocol > &proto)
	Sets a Protocol for this Model It is also set by a call to AddWithRefs with Protocol It is used for : DumpHeader (as required), ClearEntities ... More...

virtual Handle< Interface_Protocol >	Protocol () const
	Returns the Protocol which has been set by SetProtocol, or AddWithRefs with Protocol. More...

void	SetGTool (const Handle< Interface_GTool > &gtool)
	Sets a GTool for this model, which already defines a Protocol. More...

Handle< Interface_GTool >	GTool () const
	Returns the GTool, set by SetProtocol or by SetGTool. More...

Standard_Boolean &	DispatchStatus ()
	Returns the Dispatch Status, either for get or set A Model which is produced from Dispatch may share entities with the original (according to the Protocol), hence these non-copied entities should not be deleted. More...

virtual void	Clear ()
	Erases contained data; used when a Model is copied to others : the new copied ones begin from clear Clear calls specific method ClearHeader (see below) More...

virtual void	ClearEntities ()
	Clears the entities; uses the general service WhenDelete, in addition to the standard Memory Manager; can be redefined. More...

virtual void	ClearLabels ()=0
	Erases informations about labels, if any : specific to each norm. More...

virtual void	ClearHeader ()=0
	Clears Model's header : specific to each norm. More...

Standard_Integer	NbEntities () const
	Returns count of contained Entities. More...

Standard_Boolean	Contains (const Handle< Standard_Transient > &anentity) const
	Returns True if a Model contains an Entity (for a ReportEntity, looks for the ReportEntity itself AND its Concerned Entity) More...

Standard_Integer	Number (const Handle< Standard_Transient > &anentity) const
	Returns the Number of an Entity in the Model if it contains it. Else returns 0. For a ReportEntity, looks at Concerned Entity. Returns the Directory entry Number of an Entity in the Model if it contains it. Else returns 0. For a ReportEntity, looks at Concerned Entity. More...

const Handle< Standard_Transient > &	Value (const Standard_Integer num) const
	Returns an Entity identified by its number in the Model Each sub-class of InterfaceModel can define its own method Entity to return its specific class of Entity (e.g. for VDA, VDAModel returns a VDAEntity), working by calling Value Remark : For a Reported Entity, (Erroneous, Corrected, Unknown), this method returns this Reported Entity. See ReportEntity for other questions. More...

Standard_Integer	NbTypes (const Handle< Standard_Transient > &ent) const
	Returns the count of DISTINCT types under which an entity may be processed. Defined by the Protocol, which gives default as 1 (dynamic Type). More...

Handle< Standard_Type >	Type (const Handle< Standard_Transient > &ent, const Standard_Integer num=1) const
	Returns a type, given its rank : defined by the Protocol (by default, the first one) More...

Standard_CString	TypeName (const Handle< Standard_Transient > &ent, const Standard_Boolean complete=Standard_True) const
	Returns the type name of an entity, from the list of types (one or more ...) <complete> True (D) gives the complete type, else packages are removed WARNING : buffered, to be immediately copied or printed. More...

Interface_DataState	EntityState (const Standard_Integer num) const
	Returns the State of an entity, given its number. More...

Standard_Boolean	IsReportEntity (const Standard_Integer num, const Standard_Boolean semantic=Standard_False) const
	Returns True if <num> identifies a ReportEntity in the Model Hence, ReportEntity can be called. More...

Handle< Interface_ReportEntity >	ReportEntity (const Standard_Integer num, const Standard_Boolean semantic=Standard_False) const
	Returns a ReportEntity identified by its number in the Model, or a Null Handle If <num> does not identify a ReportEntity. More...

Standard_Boolean	IsErrorEntity (const Standard_Integer num) const
	Returns True if <num> identifies an Error Entity : in this case, a ReportEntity brings Fail Messages and possibly an "undefined" Content, see IsRedefinedEntity. More...

Standard_Boolean	IsRedefinedContent (const Standard_Integer num) const
	Returns True if <num> identifies an Entity which content is redefined through a ReportEntity (i.e. with literal data only) This happens when an entity is syntactically erroneous in the way that its basic content remains empty. For more details (such as content itself), see ReportEntity. More...

Standard_Boolean	ClearReportEntity (const Standard_Integer num)
	Removes the ReportEntity attached to Entity <num>. Returns True if done, False if no ReportEntity was attached to <num>. Warning : the caller must assume that this clearing is meaningfull. More...

Standard_Boolean	SetReportEntity (const Standard_Integer num, const Handle< Interface_ReportEntity > &rep)
	Sets or Replaces a ReportEntity for the Entity <num>. Returns True if Report is replaced, False if it has been replaced Warning : the caller must assume that this setting is meaningfull. More...

Standard_Boolean	AddReportEntity (const Handle< Interface_ReportEntity > &rep, const Standard_Boolean semantic=Standard_False)
	Adds a ReportEntity as such. Returns False if the concerned entity is not recorded in the Model Else, adds it into, either the main report list or the list for semantic checks, then returns True. More...

Standard_Boolean	IsUnknownEntity (const Standard_Integer num) const
	Returns True if <num> identifies an Unknown Entity : in this case, a ReportEntity with no Check Messages designates it. More...

void	FillSemanticChecks (const Interface_CheckIterator &checks, const Standard_Boolean clear=Standard_True)
	Fills the list of semantic checks. This list is computed (by CheckTool). Hence, it can be stored in the model for later queries <clear> True (D) : new list replaces <clear> False : new list is cumulated. More...

Standard_Boolean	HasSemanticChecks () const
	Returns True if semantic checks have been filled. More...

const Handle< Interface_Check > &	Check (const Standard_Integer num, const Standard_Boolean syntactic) const
	Returns the check attached to an entity, designated by its Number. 0 for global check <semantic> True : recorded semantic check <semantic> False : recorded syntactic check (see ReportEntity) If no check is recorded for <num>, returns an empty Check. More...

virtual void	Reservate (const Standard_Integer nbent)
	Does a reservation for the List of Entities (for optimized storage management). If it is not called, storage management can be less efficient. <nbent> is the expected count of Entities to store. More...

virtual void	AddEntity (const Handle< Standard_Transient > &anentity)
	Internal method for adding an Entity. Used by file reading (defined by each Interface) and Transfer tools. It adds the entity required to be added, not its refs : see AddWithRefs. If <anentity> is a ReportEntity, it is added to the list of Reports, its Concerned Entity (Erroneous or Corrected, else Unknown) is added to the list of Entities. That is, the ReportEntity must be created before Adding. More...

void	AddWithRefs (const Handle< Standard_Transient > &anent, const Handle< Interface_Protocol > &proto, const Standard_Integer level=0, const Standard_Boolean listall=Standard_False)
	Adds to the Model, an Entity with all its References, as they are defined by General Services FillShared and ListImplied. Process is recursive (any sub-levels) if <level> = 0 (Default) Else, adds sub-entities until the required sub-level. Especially, if <level> = 1, adds immediate subs and that's all. More...

void	AddWithRefs (const Handle< Standard_Transient > &anent, const Standard_Integer level=0, const Standard_Boolean listall=Standard_False)
	Same as above, but works with the Protocol of the Model. More...

void	AddWithRefs (const Handle< Standard_Transient > &anent, const Interface_GeneralLib &lib, const Standard_Integer level=0, const Standard_Boolean listall=Standard_False)
	Same as above, but works with an already created GeneralLib. More...

void	ReplaceEntity (const Standard_Integer nument, const Handle< Standard_Transient > &anent)
	Replace Entity with Number=nument on other entity - "anent". More...

void	ReverseOrders (const Standard_Integer after=0)
	Reverses the Numbers of the Entities, between <after> and the total count of Entities. Thus, the entities : 1,2 ... after, after+1 ... nb-1, nb become numbered as : 1,2 ... after, nb, nb-1 ... after+1 By default (after = 0) the whole list of Entities is reversed. More...

void	ChangeOrder (const Standard_Integer oldnum, const Standard_Integer newnum, const Standard_Integer count=1)
	Changes the Numbers of some Entities : <oldnum> is moved to <newnum>, same for <count> entities. Thus : 1,2 ... newnum-1 newnum ... oldnum .. oldnum+count oldnum+count+1 .. gives 1,2 ... newnum-1 oldnum .. oldnum+count newnum ... oldnum+count+1 (can be seen as a circular permutation) More...

void	GetFromTransfer (const Interface_EntityIterator &aniter)
	Gets contents from an EntityIterator, prepared by a Transfer tool (e.g TransferCopy). Starts from clear. More...

virtual void	GetFromAnother (const Handle< Interface_InterfaceModel > &other)=0
	Gets header (data specific of a defined Interface) from another InterfaceModel; called from TransferCopy. More...

virtual Handle< Interface_InterfaceModel >	NewEmptyModel () const =0
	Returns a New Empty Model, same type as <me> (whatever its Type); called to Copy parts a Model into other ones, then followed by a call to GetFromAnother (Header) then filling with specified Entities, themselves copied. More...

Standard_Boolean	SetCategoryNumber (const Standard_Integer num, const Standard_Integer val)
	Records a category number for an entity number Returns True when done, False if <num> is out of range. More...

Standard_Integer	CategoryNumber (const Standard_Integer num) const
	Returns the recorded category number for a given entity number 0 if none was defined for this entity. More...

void	FillIterator (Interface_EntityIterator &iter) const
	Allows an EntityIterator to get a list of Entities. More...

Interface_EntityIterator	Entities () const
	Returns the list of all Entities, as an Iterator on Entities (the Entities themselves, not the Reports) More...

Interface_EntityIterator	Reports (const Standard_Boolean semantic=Standard_False) const
	Returns the list of all ReportEntities, i.e. data about Entities read with Error or Warning informations (each item has to be casted to Report Entity then it can be queried for Concerned Entity, Content, Check ...) By default, returns the main reports, is <semantic> is True it returns the list for sematic checks. More...

Interface_EntityIterator	Redefineds () const
	Returns the list of ReportEntities which redefine data (generally, if concerned entity is "Error", a literal content is added to it : this is a "redefined entity". More...

const Handle< Interface_Check > &	GlobalCheck (const Standard_Boolean syntactic=Standard_True) const
	Returns the GlobalCheck, which memorizes messages global to the file (not specific to an Entity), especially Header. More...

void	SetGlobalCheck (const Handle< Interface_Check > &ach)
	Allows to modify GlobalCheck, after getting then completing it Remark : it is SYNTACTIC check. Semantics, see FillChecks. More...

virtual void	VerifyCheck (Handle< Interface_Check > &ach) const
	Minimum Semantic Global Check on data in model (header) Can only check basic Data. See also GlobalCheck from Protocol for a check which takes the Graph into account Default does nothing, can be redefined. More...

virtual void	DumpHeader (const Handle< Message_Messenger > &S, const Standard_Integer level=0) const =0
	Dumps Header in a short, easy to read, form, onto a Stream <level> allows to print more or less parts of the header, if necessary. 0 for basic print. More...

void	Print (const Handle< Standard_Transient > &ent, const Handle< Message_Messenger > &s, const Standard_Integer mode=0) const
	Prints identification of a given entity in <me>, in order to be printed in a list or phrase <mode> < 0 : prints only its number <mode> = 1 : just calls PrintLabel <mode> = 0 (D) : prints its number plus '/' plus PrintLabel If <ent> == <me>, simply prints "Global" If <ent> is unknown, prints "??/its type". More...

virtual void	PrintLabel (const Handle< Standard_Transient > &ent, const Handle< Message_Messenger > &S) const =0
	Prints label specific to each norm, for a given entity. Must only print label itself, in order to be included in a phrase. Can call the result of StringLabel, but not obliged. More...

virtual void	PrintToLog (const Handle< Standard_Transient > &ent, const Handle< Message_Messenger > &S) const
	Prints label specific to each norm in log format, for a given entity. By default, just calls PrintLabel, can be redefined. More...

virtual Handle< TCollection_HAsciiString >	StringLabel (const Handle< Standard_Transient > &ent) const =0
	Returns a string with the label attached to a given entity. Warning : While this string may be edited on the spot, if it is a read field, the returned value must be copied before. More...

virtual Standard_Integer	NextNumberForLabel (const Standard_CString label, const Standard_Integer lastnum=0, const Standard_Boolean exact=Standard_True) const
	Searches a label which matches with one entity. Begins from <lastnum>+1 (default:1) and scans the entities until <NbEntities>. For the first which matches <label>, this method returns its Number. Returns 0 if nothing found Can be called recursively (labels are not specified as unique) <exact> : if True (default), exact match is required else, checks the END of entity label. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Static Public Member Functions
static Standard_CString	ClassName (const Standard_CString typnam)
	From a CDL Type Name, returns the Class part (package dropped) WARNING : buffered, to be immediately copied or printed. More...

static Standard_Boolean	HasTemplate (const Standard_CString name)
	Returns true if a template is attached to a given name. More...

static Handle< Interface_InterfaceModel >	Template (const Standard_CString name)
	Returns the template model attached to a name, or a Null Handle. More...

static Standard_Boolean	SetTemplate (const Standard_CString name, const Handle< Interface_InterfaceModel > &model)
	Records a new template model with a name. If the name was already recorded, the corresponding template is replaced by the new one. Then, WARNING : test HasTemplate to avoid surprises. More...

static Handle< TColStd_HSequenceOfHAsciiString >	ListTemplates ()
	Returns the complete list of names attached to template models. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Protected Member Functions
	Interface_InterfaceModel ()
	Defines empty InterfaceModel, ready to be filled. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Detailed Description

Defines an (Indexed) Set of data corresponding to a complete Transfer by a File Interface, i.e. File Header and Transient Entities (Objects) contained in a File. Contained Entities are identified in the Model by unique and consecutive Numbers.

In addition, a Model can attach to each entity, a specific Label according to the norm (e.g. Name for VDA, #ident for Step ...), intended to be output on a string or a stream (remark : labels are not obliged to be unique)

InterfaceModel itself is not Transient, it is intended to work on a set of Transient Data. The services offered are basic Listing and Identification operations on Transient Entities, storage of Error Reports, Copying.

Moreovere, it is possible to define and use templates. These are empty Models, from which copies can be obtained in order to be filled with effective data. This allows to record standard definitions for headers, avoiding to recreate them for each sendings, and assuring customisation of produced files for a given site. A template is attached to a name. It is possible to define a template from another one (get it, edit it then record it under another name).

See also Graph, ShareTool, CheckTool for more

Constructor & Destructor Documentation

◆ ~Interface_InterfaceModel()

Interface_InterfaceModel::~Interface_InterfaceModel ( )

inline

◆ Interface_InterfaceModel()

Interface_InterfaceModel::Interface_InterfaceModel ( )

protected

Defines empty InterfaceModel, ready to be filled.

Member Function Documentation

◆ AddEntity()

virtual void Interface_InterfaceModel::AddEntity ( const Handle< Standard_Transient > & anentity )

virtual

Internal method for adding an Entity. Used by file reading (defined by each Interface) and Transfer tools. It adds the entity required to be added, not its refs : see AddWithRefs. If <anentity> is a ReportEntity, it is added to the list of Reports, its Concerned Entity (Erroneous or Corrected, else Unknown) is added to the list of Entities. That is, the ReportEntity must be created before Adding.

◆ AddReportEntity()

Standard_Boolean Interface_InterfaceModel::AddReportEntity	(	const Handle< Interface_ReportEntity > &	rep,
		const Standard_Boolean	semantic = `Standard_False`
	)

Adds a ReportEntity as such. Returns False if the concerned entity is not recorded in the Model Else, adds it into, either the main report list or the list for semantic checks, then returns True.

◆ AddWithRefs() [1/3]

void Interface_InterfaceModel::AddWithRefs	(	const Handle< Standard_Transient > &	anent,
		const Handle< Interface_Protocol > &	proto,
		const Standard_Integer	level = `0`,
		const Standard_Boolean	listall = `Standard_False`
	)

Adds to the Model, an Entity with all its References, as they are defined by General Services FillShared and ListImplied. Process is recursive (any sub-levels) if <level> = 0 (Default) Else, adds sub-entities until the required sub-level. Especially, if <level> = 1, adds immediate subs and that's all.

If <listall> is False (Default), an entity (<anentity> itself or one of its subs at any level) which is already recorded in the Model is not analysed, only the newly added ones are. If <listall> is True, all items are analysed (this allows to ensure the consistency of an adding made by steps)

◆ AddWithRefs() [2/3]

void Interface_InterfaceModel::AddWithRefs	(	const Handle< Standard_Transient > &	anent,
		const Standard_Integer	level = `0`,
		const Standard_Boolean	listall = `Standard_False`
	)

Same as above, but works with the Protocol of the Model.

◆ AddWithRefs() [3/3]

void Interface_InterfaceModel::AddWithRefs	(	const Handle< Standard_Transient > &	anent,
		const Interface_GeneralLib &	lib,
		const Standard_Integer	level = `0`,
		const Standard_Boolean	listall = `Standard_False`
	)

Same as above, but works with an already created GeneralLib.

◆ CategoryNumber()

Standard_Integer Interface_InterfaceModel::CategoryNumber ( const Standard_Integer num ) const

Returns the recorded category number for a given entity number 0 if none was defined for this entity.

◆ ChangeOrder()

void Interface_InterfaceModel::ChangeOrder	(	const Standard_Integer	oldnum,
		const Standard_Integer	newnum,
		const Standard_Integer	count = `1`
	)

Changes the Numbers of some Entities : <oldnum> is moved to <newnum>, same for <count> entities. Thus : 1,2 ... newnum-1 newnum ... oldnum .. oldnum+count oldnum+count+1 .. gives 1,2 ... newnum-1 oldnum .. oldnum+count newnum ... oldnum+count+1 (can be seen as a circular permutation)

◆ Check()

const Handle< Interface_Check >& Interface_InterfaceModel::Check	(	const Standard_Integer	num,
		const Standard_Boolean	syntactic
	)		const

Returns the check attached to an entity, designated by its Number. 0 for global check <semantic> True : recorded semantic check <semantic> False : recorded syntactic check (see ReportEntity) If no check is recorded for <num>, returns an empty Check.

◆ ClassName()

static Standard_CString Interface_InterfaceModel::ClassName ( const Standard_CString typnam )

static

From a CDL Type Name, returns the Class part (package dropped) WARNING : buffered, to be immediately copied or printed.

◆ Clear()

virtual void Interface_InterfaceModel::Clear ( )

virtual

Erases contained data; used when a Model is copied to others : the new copied ones begin from clear Clear calls specific method ClearHeader (see below)

◆ ClearEntities()

virtual void Interface_InterfaceModel::ClearEntities ( )

virtual

Clears the entities; uses the general service WhenDelete, in addition to the standard Memory Manager; can be redefined.

◆ ClearHeader()

virtual void Interface_InterfaceModel::ClearHeader ( )

pure virtual

Clears Model's header : specific to each norm.

Implemented in StepData_StepModel, and IGESData_IGESModel.

◆ ClearLabels()

virtual void Interface_InterfaceModel::ClearLabels ( )

pure virtual

Erases informations about labels, if any : specific to each norm.

Implemented in IGESData_IGESModel, and StepData_StepModel.

◆ ClearReportEntity()

Standard_Boolean Interface_InterfaceModel::ClearReportEntity ( const Standard_Integer num )

Removes the ReportEntity attached to Entity <num>. Returns True if done, False if no ReportEntity was attached to <num>. Warning : the caller must assume that this clearing is meaningfull.

◆ Contains()

Standard_Boolean Interface_InterfaceModel::Contains ( const Handle< Standard_Transient > & anentity ) const

Returns True if a Model contains an Entity (for a ReportEntity, looks for the ReportEntity itself AND its Concerned Entity)

◆ Destroy()

void Interface_InterfaceModel::Destroy ( )

Clears the list of entities (service WhenDelete)

◆ DispatchStatus()

Standard_Boolean& Interface_InterfaceModel::DispatchStatus ( )

Returns the Dispatch Status, either for get or set A Model which is produced from Dispatch may share entities with the original (according to the Protocol), hence these non-copied entities should not be deleted.

◆ DumpHeader()

virtual void Interface_InterfaceModel::DumpHeader	(	const Handle< Message_Messenger > &	S,
		const Standard_Integer	level = `0`
	)		const

pure virtual

Dumps Header in a short, easy to read, form, onto a Stream <level> allows to print more or less parts of the header, if necessary. 0 for basic print.

Implemented in StepData_StepModel, and IGESData_IGESModel.

◆ Entities()

Interface_EntityIterator Interface_InterfaceModel::Entities ( ) const

Returns the list of all Entities, as an Iterator on Entities (the Entities themselves, not the Reports)

◆ EntityState()

Interface_DataState Interface_InterfaceModel::EntityState ( const Standard_Integer num ) const

Returns the State of an entity, given its number.

◆ FillIterator()

void Interface_InterfaceModel::FillIterator ( Interface_EntityIterator & iter ) const

Allows an EntityIterator to get a list of Entities.

◆ FillSemanticChecks()

void Interface_InterfaceModel::FillSemanticChecks	(	const Interface_CheckIterator &	checks,
		const Standard_Boolean	clear = `Standard_True`
	)

Fills the list of semantic checks. This list is computed (by CheckTool). Hence, it can be stored in the model for later queries <clear> True (D) : new list replaces <clear> False : new list is cumulated.

◆ GetFromAnother()

virtual void Interface_InterfaceModel::GetFromAnother ( const Handle< Interface_InterfaceModel > & other )

pure virtual

Gets header (data specific of a defined Interface) from another InterfaceModel; called from TransferCopy.

Implemented in IGESData_IGESModel, and StepData_StepModel.

◆ GetFromTransfer()

void Interface_InterfaceModel::GetFromTransfer ( const Interface_EntityIterator & aniter )

Gets contents from an EntityIterator, prepared by a Transfer tool (e.g TransferCopy). Starts from clear.

◆ GlobalCheck()

const Handle< Interface_Check >& Interface_InterfaceModel::GlobalCheck ( const Standard_Boolean syntactic = Standard_True ) const

Returns the GlobalCheck, which memorizes messages global to the file (not specific to an Entity), especially Header.

◆ GTool()

Handle< Interface_GTool > Interface_InterfaceModel::GTool ( ) const

Returns the GTool, set by SetProtocol or by SetGTool.

◆ HasSemanticChecks()

Standard_Boolean Interface_InterfaceModel::HasSemanticChecks ( ) const

Returns True if semantic checks have been filled.

◆ HasTemplate()

static Standard_Boolean Interface_InterfaceModel::HasTemplate ( const Standard_CString name )

static

Returns true if a template is attached to a given name.

◆ IsErrorEntity()

Standard_Boolean Interface_InterfaceModel::IsErrorEntity ( const Standard_Integer num ) const

Returns True if <num> identifies an Error Entity : in this case, a ReportEntity brings Fail Messages and possibly an "undefined" Content, see IsRedefinedEntity.

◆ IsRedefinedContent()

Standard_Boolean Interface_InterfaceModel::IsRedefinedContent ( const Standard_Integer num ) const

Returns True if <num> identifies an Entity which content is redefined through a ReportEntity (i.e. with literal data only) This happens when an entity is syntactically erroneous in the way that its basic content remains empty. For more details (such as content itself), see ReportEntity.

◆ IsReportEntity()

Standard_Boolean Interface_InterfaceModel::IsReportEntity	(	const Standard_Integer	num,
		const Standard_Boolean	semantic = `Standard_False`
	)		const

Returns True if <num> identifies a ReportEntity in the Model Hence, ReportEntity can be called.

By default, queries main report, if <semantic> is True, it queries report for semantic check

Remember that a Report Entity can be defined for an Unknown Entity, or a Corrected or Erroneous (at read time) Entity. The ReportEntity is defined before call to method AddEntity.

◆ IsUnknownEntity()

Standard_Boolean Interface_InterfaceModel::IsUnknownEntity ( const Standard_Integer num ) const

Returns True if <num> identifies an Unknown Entity : in this case, a ReportEntity with no Check Messages designates it.

◆ ListTemplates()

static Handle< TColStd_HSequenceOfHAsciiString > Interface_InterfaceModel::ListTemplates ( )

static

Returns the complete list of names attached to template models.

◆ NbEntities()

Standard_Integer Interface_InterfaceModel::NbEntities ( ) const

Returns count of contained Entities.

◆ NbTypes()

Standard_Integer Interface_InterfaceModel::NbTypes ( const Handle< Standard_Transient > & ent ) const

Returns the count of DISTINCT types under which an entity may be processed. Defined by the Protocol, which gives default as 1 (dynamic Type).

◆ NewEmptyModel()

virtual Handle< Interface_InterfaceModel > Interface_InterfaceModel::NewEmptyModel ( ) const

pure virtual

Returns a New Empty Model, same type as <me> (whatever its Type); called to Copy parts a Model into other ones, then followed by a call to GetFromAnother (Header) then filling with specified Entities, themselves copied.

Implemented in IGESData_IGESModel, and StepData_StepModel.

◆ NextNumberForLabel()

virtual Standard_Integer Interface_InterfaceModel::NextNumberForLabel	(	const Standard_CString	label,
		const Standard_Integer	lastnum = `0`,
		const Standard_Boolean	exact = `Standard_True`
	)		const

virtual

Searches a label which matches with one entity. Begins from <lastnum>+1 (default:1) and scans the entities until <NbEntities>. For the first which matches <label>, this method returns its Number. Returns 0 if nothing found Can be called recursively (labels are not specified as unique) <exact> : if True (default), exact match is required else, checks the END of entity label.

This method is virtual, hence it can be redefined for a more efficient search (if exact is true).

◆ Number()

Standard_Integer Interface_InterfaceModel::Number ( const Handle< Standard_Transient > & anentity ) const

Returns the Number of an Entity in the Model if it contains it. Else returns 0. For a ReportEntity, looks at Concerned Entity. Returns the Directory entry Number of an Entity in the Model if it contains it. Else returns 0. For a ReportEntity, looks at Concerned Entity.

◆ Print()

void Interface_InterfaceModel::Print	(	const Handle< Standard_Transient > &	ent,
		const Handle< Message_Messenger > &	s,
		const Standard_Integer	mode = `0`
	)		const

Prints identification of a given entity in <me>, in order to be printed in a list or phrase <mode> < 0 : prints only its number <mode> = 1 : just calls PrintLabel <mode> = 0 (D) : prints its number plus '/' plus PrintLabel If <ent> == <me>, simply prints "Global" If <ent> is unknown, prints "??/its type".

◆ PrintLabel()

virtual void Interface_InterfaceModel::PrintLabel	(	const Handle< Standard_Transient > &	ent,
		const Handle< Message_Messenger > &	S
	)		const

pure virtual

Prints label specific to each norm, for a given entity. Must only print label itself, in order to be included in a phrase. Can call the result of StringLabel, but not obliged.

Implemented in IGESData_IGESModel, and StepData_StepModel.

◆ PrintToLog()

virtual void Interface_InterfaceModel::PrintToLog	(	const Handle< Standard_Transient > &	ent,
		const Handle< Message_Messenger > &	S
	)		const

virtual

Prints label specific to each norm in log format, for a given entity. By default, just calls PrintLabel, can be redefined.

Reimplemented in IGESData_IGESModel.

◆ Protocol()

virtual Handle< Interface_Protocol > Interface_InterfaceModel::Protocol ( ) const

virtual

Returns the Protocol which has been set by SetProtocol, or AddWithRefs with Protocol.

◆ Redefineds()

Interface_EntityIterator Interface_InterfaceModel::Redefineds ( ) const

Returns the list of ReportEntities which redefine data (generally, if concerned entity is "Error", a literal content is added to it : this is a "redefined entity".

◆ ReplaceEntity()

void Interface_InterfaceModel::ReplaceEntity	(	const Standard_Integer	nument,
		const Handle< Standard_Transient > &	anent
	)

Replace Entity with Number=nument on other entity - "anent".

◆ ReportEntity()

Handle< Interface_ReportEntity > Interface_InterfaceModel::ReportEntity	(	const Standard_Integer	num,
		const Standard_Boolean	semantic = `Standard_False`
	)		const

Returns a ReportEntity identified by its number in the Model, or a Null Handle If <num> does not identify a ReportEntity.

By default, queries main report, if <semantic> is True, it queries report for semantic check

◆ Reports()

Interface_EntityIterator Interface_InterfaceModel::Reports ( const Standard_Boolean semantic = Standard_False ) const

Returns the list of all ReportEntities, i.e. data about Entities read with Error or Warning informations (each item has to be casted to Report Entity then it can be queried for Concerned Entity, Content, Check ...) By default, returns the main reports, is <semantic> is True it returns the list for sematic checks.

◆ Reservate()

virtual void Interface_InterfaceModel::Reservate ( const Standard_Integer nbent )

virtual

Does a reservation for the List of Entities (for optimized storage management). If it is not called, storage management can be less efficient. <nbent> is the expected count of Entities to store.

◆ ReverseOrders()

void Interface_InterfaceModel::ReverseOrders ( const Standard_Integer after = 0 )

Reverses the Numbers of the Entities, between <after> and the total count of Entities. Thus, the entities : 1,2 ... after, after+1 ... nb-1, nb become numbered as : 1,2 ... after, nb, nb-1 ... after+1 By default (after = 0) the whole list of Entities is reversed.

◆ SetCategoryNumber()

Standard_Boolean Interface_InterfaceModel::SetCategoryNumber	(	const Standard_Integer	num,
		const Standard_Integer	val
	)

Records a category number for an entity number Returns True when done, False if <num> is out of range.

◆ SetGlobalCheck()

void Interface_InterfaceModel::SetGlobalCheck ( const Handle< Interface_Check > & ach )

Allows to modify GlobalCheck, after getting then completing it Remark : it is SYNTACTIC check. Semantics, see FillChecks.

◆ SetGTool()

void Interface_InterfaceModel::SetGTool ( const Handle< Interface_GTool > & gtool )

Sets a GTool for this model, which already defines a Protocol.

◆ SetProtocol()

void Interface_InterfaceModel::SetProtocol ( const Handle< Interface_Protocol > & proto )

Sets a Protocol for this Model It is also set by a call to AddWithRefs with Protocol It is used for : DumpHeader (as required), ClearEntities ...

◆ SetReportEntity()

Standard_Boolean Interface_InterfaceModel::SetReportEntity	(	const Standard_Integer	num,
		const Handle< Interface_ReportEntity > &	rep
	)

Sets or Replaces a ReportEntity for the Entity <num>. Returns True if Report is replaced, False if it has been replaced Warning : the caller must assume that this setting is meaningfull.

◆ SetTemplate()

static Standard_Boolean Interface_InterfaceModel::SetTemplate	(	const Standard_CString	name,
		const Handle< Interface_InterfaceModel > &	model
	)

static

Records a new template model with a name. If the name was already recorded, the corresponding template is replaced by the new one. Then, WARNING : test HasTemplate to avoid surprises.

◆ StringLabel()

virtual Handle< TCollection_HAsciiString > Interface_InterfaceModel::StringLabel ( const Handle< Standard_Transient > & ent ) const

pure virtual

Returns a string with the label attached to a given entity. Warning : While this string may be edited on the spot, if it is a read field, the returned value must be copied before.

Implemented in IGESData_IGESModel, and StepData_StepModel.

◆ Template()

static Handle< Interface_InterfaceModel > Interface_InterfaceModel::Template ( const Standard_CString name )

static

Returns the template model attached to a name, or a Null Handle.

◆ Type()

Handle< Standard_Type > Interface_InterfaceModel::Type	(	const Handle< Standard_Transient > &	ent,
		const Standard_Integer	num = `1`
	)		const

Returns a type, given its rank : defined by the Protocol (by default, the first one)

◆ TypeName()

Standard_CString Interface_InterfaceModel::TypeName	(	const Handle< Standard_Transient > &	ent,
		const Standard_Boolean	complete = `Standard_True`
	)		const

Returns the type name of an entity, from the list of types (one or more ...) <complete> True (D) gives the complete type, else packages are removed WARNING : buffered, to be immediately copied or printed.

◆ Value()

const Handle< Standard_Transient >& Interface_InterfaceModel::Value ( const Standard_Integer num ) const

Returns an Entity identified by its number in the Model Each sub-class of InterfaceModel can define its own method Entity to return its specific class of Entity (e.g. for VDA, VDAModel returns a VDAEntity), working by calling Value Remark : For a Reported Entity, (Erroneous, Corrected, Unknown), this method returns this Reported Entity. See ReportEntity for other questions.

◆ VerifyCheck()

virtual void Interface_InterfaceModel::VerifyCheck ( Handle< Interface_Check > & ach ) const

virtual

Minimum Semantic Global Check on data in model (header) Can only check basic Data. See also GlobalCheck from Protocol for a check which takes the Graph into account Default does nothing, can be redefined.

Reimplemented in IGESData_IGESModel, and StepData_StepModel.

The documentation for this class was generated from the following file:

Interface_InterfaceModel.hxx

Interface_InterfaceModel Class Referenceabstract

Public Member Functions

Static Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ~Interface_InterfaceModel()

◆ Interface_InterfaceModel()

Member Function Documentation

◆ AddEntity()

◆ AddReportEntity()

◆ AddWithRefs() [1/3]

◆ AddWithRefs() [2/3]

◆ AddWithRefs() [3/3]

◆ CategoryNumber()

◆ ChangeOrder()

◆ Check()

◆ ClassName()

◆ Clear()

◆ ClearEntities()

◆ ClearHeader()

◆ ClearLabels()

◆ ClearReportEntity()

◆ Contains()

◆ Destroy()

◆ DispatchStatus()

◆ DumpHeader()

◆ Entities()

◆ EntityState()

◆ FillIterator()

◆ FillSemanticChecks()

◆ GetFromAnother()

◆ GetFromTransfer()

◆ GlobalCheck()

◆ GTool()

◆ HasSemanticChecks()

◆ HasTemplate()

◆ IsErrorEntity()

◆ IsRedefinedContent()

◆ IsReportEntity()

◆ IsUnknownEntity()

◆ ListTemplates()

◆ NbEntities()

◆ NbTypes()

◆ NewEmptyModel()

◆ NextNumberForLabel()

◆ Number()

◆ Print()

◆ PrintLabel()

◆ PrintToLog()

◆ Protocol()

◆ Redefineds()

◆ ReplaceEntity()

◆ ReportEntity()

◆ Reports()

◆ Reservate()

◆ ReverseOrders()

◆ SetCategoryNumber()

◆ SetGlobalCheck()

◆ SetGTool()

◆ SetProtocol()

◆ SetReportEntity()

◆ SetTemplate()

◆ StringLabel()

◆ Template()

◆ Type()

◆ TypeName()

◆ Value()

◆ VerifyCheck()