#include <BRepApprox_TheComputeLineOfApprox.hxx>

Public Member Functions
	BRepApprox_TheComputeLineOfApprox (const BRepApprox_TheMultiLineOfApprox &Line, const Standard_Integer degreemin=4, const Standard_Integer degreemax=8, const Standard_Real Tolerance3d=1.0e-3, const Standard_Real Tolerance2d=1.0e-6, const Standard_Integer NbIterations=5, const Standard_Boolean cutting=Standard_True, const Approx_ParametrizationType parametrization=Approx_ChordLength, const Standard_Boolean Squares=Standard_False)

	BRepApprox_TheComputeLineOfApprox (const BRepApprox_TheMultiLineOfApprox &Line, const math_Vector &Parameters, const Standard_Integer degreemin=4, const Standard_Integer degreemax=8, const Standard_Real Tolerance3d=1.0e-03, const Standard_Real Tolerance2d=1.0e-06, const Standard_Integer NbIterations=5, const Standard_Boolean cutting=Standard_True, const Standard_Boolean Squares=Standard_False)

	BRepApprox_TheComputeLineOfApprox (const math_Vector &Parameters, const Standard_Integer degreemin=4, const Standard_Integer degreemax=8, const Standard_Real Tolerance3d=1.0e-03, const Standard_Real Tolerance2d=1.0e-06, const Standard_Integer NbIterations=5, const Standard_Boolean cutting=Standard_True, const Standard_Boolean Squares=Standard_False)

	BRepApprox_TheComputeLineOfApprox (const Standard_Integer degreemin=4, const Standard_Integer degreemax=8, const Standard_Real Tolerance3d=1.0e-03, const Standard_Real Tolerance2d=1.0e-06, const Standard_Integer NbIterations=5, const Standard_Boolean cutting=Standard_True, const Approx_ParametrizationType parametrization=Approx_ChordLength, const Standard_Boolean Squares=Standard_False)

void	Interpol (const BRepApprox_TheMultiLineOfApprox &Line)

void	Init (const Standard_Integer degreemin=4, const Standard_Integer degreemax=8, const Standard_Real Tolerance3d=1.0e-03, const Standard_Real Tolerance2d=1.0e-06, const Standard_Integer NbIterations=5, const Standard_Boolean cutting=Standard_True, const Approx_ParametrizationType parametrization=Approx_ChordLength, const Standard_Boolean Squares=Standard_False)

void	Perform (const BRepApprox_TheMultiLineOfApprox &Line)

void	SetParameters (const math_Vector &ThePar)

void	SetKnots (const TColStd_Array1OfReal &Knots)

void	SetKnotsAndMultiplicities (const TColStd_Array1OfReal &Knots, const TColStd_Array1OfInteger &Mults)

void	SetDegrees (const Standard_Integer degreemin, const Standard_Integer degreemax)

void	SetTolerances (const Standard_Real Tolerance3d, const Standard_Real Tolerance2d)

void	SetContinuity (const Standard_Integer C)

void	SetConstraints (const AppParCurves_Constraint firstC, const AppParCurves_Constraint lastC)

Standard_Boolean	IsAllApproximated () const

Standard_Boolean	IsToleranceReached () const

void	Error (Standard_Real &tol3d, Standard_Real &tol2d) const

const AppParCurves_MultiBSpCurve &	Value () const

AppParCurves_MultiBSpCurve &	ChangeValue ()

const TColStd_Array1OfReal &	Parameters () const

Constructor & Destructor Documentation

BRepApprox_TheComputeLineOfApprox::BRepApprox_TheComputeLineOfApprox	(	const BRepApprox_TheMultiLineOfApprox &	Line,
		const Standard_Integer	degreemin = `4`,
		const Standard_Integer	degreemax = `8`,
		const Standard_Real	Tolerance3d = `1.0e-3`,
		const Standard_Real	Tolerance2d = `1.0e-6`,
		const Standard_Integer	NbIterations = `5`,
		const Standard_Boolean	cutting = `Standard_True`,
		const Approx_ParametrizationType	parametrization = `Approx_ChordLength`,
		const Standard_Boolean	Squares = `Standard_False`
	)

BRepApprox_TheComputeLineOfApprox::BRepApprox_TheComputeLineOfApprox	(	const BRepApprox_TheMultiLineOfApprox &	Line,
		const math_Vector &	Parameters,
		const Standard_Integer	degreemin = `4`,
		const Standard_Integer	degreemax = `8`,
		const Standard_Real	Tolerance3d = `1.0e-03`,
		const Standard_Real	Tolerance2d = `1.0e-06`,
		const Standard_Integer	NbIterations = `5`,
		const Standard_Boolean	cutting = `Standard_True`,
		const Standard_Boolean	Squares = `Standard_False`
	)

BRepApprox_TheComputeLineOfApprox::BRepApprox_TheComputeLineOfApprox	(	const math_Vector &	Parameters,
		const Standard_Integer	degreemin = `4`,
		const Standard_Integer	degreemax = `8`,
		const Standard_Real	Tolerance3d = `1.0e-03`,
		const Standard_Real	Tolerance2d = `1.0e-06`,
		const Standard_Integer	NbIterations = `5`,
		const Standard_Boolean	cutting = `Standard_True`,
		const Standard_Boolean	Squares = `Standard_False`
	)

BRepApprox_TheComputeLineOfApprox::BRepApprox_TheComputeLineOfApprox	(	const Standard_Integer	degreemin = `4`,
		const Standard_Integer	degreemax = `8`,
		const Standard_Real	Tolerance3d = `1.0e-03`,
		const Standard_Real	Tolerance2d = `1.0e-06`,
		const Standard_Integer	NbIterations = `5`,
		const Standard_Boolean	cutting = `Standard_True`,
		const Approx_ParametrizationType	parametrization = `Approx_ChordLength`,
		const Standard_Boolean	Squares = `Standard_False`
	)

Member Function Documentation

AppParCurves_MultiBSpCurve& BRepApprox_TheComputeLineOfApprox::ChangeValue ( )

void BRepApprox_TheComputeLineOfApprox::Error	(	Standard_Real &	tol3d,
		Standard_Real &	tol2d
	)		const

void BRepApprox_TheComputeLineOfApprox::Init	(	const Standard_Integer	degreemin = `4`,
		const Standard_Integer	degreemax = `8`,
		const Standard_Real	Tolerance3d = `1.0e-03`,
		const Standard_Real	Tolerance2d = `1.0e-06`,
		const Standard_Integer	NbIterations = `5`,
		const Standard_Boolean	cutting = `Standard_True`,
		const Approx_ParametrizationType	parametrization = `Approx_ChordLength`,
		const Standard_Boolean	Squares = `Standard_False`
	)

void BRepApprox_TheComputeLineOfApprox::Interpol ( const BRepApprox_TheMultiLineOfApprox & Line )

Standard_Boolean BRepApprox_TheComputeLineOfApprox::IsAllApproximated ( ) const

Standard_Boolean BRepApprox_TheComputeLineOfApprox::IsToleranceReached ( ) const

const TColStd_Array1OfReal& BRepApprox_TheComputeLineOfApprox::Parameters ( ) const

void BRepApprox_TheComputeLineOfApprox::Perform ( const BRepApprox_TheMultiLineOfApprox & Line )

void BRepApprox_TheComputeLineOfApprox::SetConstraints	(	const AppParCurves_Constraint	firstC,
		const AppParCurves_Constraint	lastC
	)

void BRepApprox_TheComputeLineOfApprox::SetContinuity ( const Standard_Integer C )

void BRepApprox_TheComputeLineOfApprox::SetDegrees	(	const Standard_Integer	degreemin,
		const Standard_Integer	degreemax
	)

void BRepApprox_TheComputeLineOfApprox::SetKnots ( const TColStd_Array1OfReal & Knots )

void BRepApprox_TheComputeLineOfApprox::SetKnotsAndMultiplicities	(	const TColStd_Array1OfReal &	Knots,
		const TColStd_Array1OfInteger &	Mults
	)

void BRepApprox_TheComputeLineOfApprox::SetParameters ( const math_Vector & ThePar )

void BRepApprox_TheComputeLineOfApprox::SetTolerances	(	const Standard_Real	Tolerance3d,
		const Standard_Real	Tolerance2d
	)

const AppParCurves_MultiBSpCurve& BRepApprox_TheComputeLineOfApprox::Value ( ) const

The documentation for this class was generated from the following file:

BRepApprox_TheComputeLineOfApprox.hxx

Public Member Functions

Constructor & Destructor Documentation

Member Function Documentation