Open CASCADE Technology  7.5.0
Functions

ChFi3d_Builder_0.hxx File Reference

#include <TopOpeBRepDS_SurfaceCurveInterference.hxx>
#include <TopOpeBRepDS_CurvePointInterference.hxx>
#include <TopOpeBRepDS_DataStructure.hxx>
#include <TopOpeBRepDS_Curve.hxx>
#include <TopOpeBRepDS_Surface.hxx>
#include <BRepBlend_Extremity.hxx>
#include <ChFiDS_Stripe.hxx>
#include <ChFiDS_SurfData.hxx>
#include <ChFiDS_Spine.hxx>
#include <ChFiDS_HElSpine.hxx>
#include <ChFiDS_CommonPoint.hxx>
#include <ChFiDS_Regularities.hxx>
#include <ChFiDS_FaceInterference.hxx>
#include <ChFiDS_Map.hxx>
#include <TopoDS_Face.hxx>
#include <TopoDS_Vertex.hxx>
#include <TopoDS.hxx>
#include <TopAbs_Orientation.hxx>
#include <TopTools_ListOfShape.hxx>
#include <TopTools_ListIteratorOfListOfShape.hxx>
#include <IntSurf_LineOn2S.hxx>
#include <IntSurf_TypeTrans.hxx>
#include <GeomFill_Boundary.hxx>
#include <GeomFill_BoundWithSurf.hxx>
#include <GeomFill_SimpleBound.hxx>
#include <GeomFill_ConstrainedFilling.hxx>
#include <Geom2d_Curve.hxx>
#include <Geom_Curve.hxx>
#include <Geom_TrimmedCurve.hxx>
#include <Geom_Surface.hxx>
#include <Geom_BezierCurve.hxx>
#include <Geom_Circle.hxx>
#include <GeomAdaptor_Curve.hxx>
#include <GeomAdaptor_Surface.hxx>
#include <GeomAdaptor_HSurface.hxx>
#include <BRepAdaptor_Surface.hxx>
#include <BRepAdaptor_HSurface.hxx>
#include <Adaptor3d_HCurve.hxx>
#include <Adaptor3d_HCurveOnSurface.hxx>
#include <Adaptor3d_HSurface.hxx>
#include <Extrema_LocateExtCC.hxx>
#include <Extrema_POnCurv.hxx>
#include <Bnd_Box.hxx>
#include <GeomAbs_Shape.hxx>
#include <gp_Pnt.hxx>
#include <gp_Vec.hxx>
#include <gp_Pnt2d.hxx>
#include <gp_Vec2d.hxx>
#include <gp_Dir2d.hxx>
#include <TColgp_Array1OfPnt.hxx>
#include <TColgp_Array1OfVec.hxx>
#include <TColStd_Array1OfReal.hxx>
#include <TColStd_Array1OfInteger.hxx>
#include <TopTools_Array1OfShape.hxx>

Functions

Standard_Real ChFi3d_InPeriod (const Standard_Real U, const Standard_Real UFirst, const Standard_Real ULast, const Standard_Real Eps)
 
void ChFi3d_Boite (const gp_Pnt2d &p1, const gp_Pnt2d &p2, Standard_Real &mu, Standard_Real &Mu, Standard_Real &mv, Standard_Real &Mv)
 
void ChFi3d_Boite (const gp_Pnt2d &p1, const gp_Pnt2d &p2, const gp_Pnt2d &p3, const gp_Pnt2d &p4, Standard_Real &Du, Standard_Real &Dv, Standard_Real &mu, Standard_Real &Mu, Standard_Real &mv, Standard_Real &Mv)
 
void ChFi3d_SetPointTolerance (TopOpeBRepDS_DataStructure &DStr, const Bnd_Box &box, const Standard_Integer IP)
 
void ChFi3d_EnlargeBox (const Handle< Geom_Curve > &C, const Standard_Real wd, const Standard_Real wf, Bnd_Box &box1, Bnd_Box &box2)
 
void ChFi3d_EnlargeBox (const Handle< Adaptor3d_HSurface > &S, const Handle< Geom2d_Curve > &PC, const Standard_Real wd, const Standard_Real wf, Bnd_Box &box1, Bnd_Box &box2)
 
void ChFi3d_EnlargeBox (const TopoDS_Edge &E, const TopTools_ListOfShape &LF, const Standard_Real w, Bnd_Box &box)
 
void ChFi3d_EnlargeBox (TopOpeBRepDS_DataStructure &DStr, const Handle< ChFiDS_Stripe > &st, const Handle< ChFiDS_SurfData > &sd, Bnd_Box &b1, Bnd_Box &b2, const Standard_Boolean isfirst)
 
GeomAbs_Shape ChFi3d_evalconti (const TopoDS_Edge &E, const TopoDS_Face &F1, const TopoDS_Face &F2)
 
void ChFi3d_conexfaces (const TopoDS_Edge &E, TopoDS_Face &F1, TopoDS_Face &F2, const ChFiDS_Map &EFMap)
 
ChFiDS_State ChFi3d_EdgeState (TopoDS_Edge *E, const ChFiDS_Map &EFMap)
 
Standard_Boolean ChFi3d_KParticular (const Handle< ChFiDS_Spine > &Spine, const Standard_Integer IE, const BRepAdaptor_Surface &S1, const BRepAdaptor_Surface &S2)
 
void ChFi3d_BoundFac (BRepAdaptor_Surface &S, const Standard_Real umin, const Standard_Real umax, const Standard_Real vmin, const Standard_Real vmax, const Standard_Boolean checknaturalbounds=Standard_True)
 
void ChFi3d_BoundSrf (GeomAdaptor_Surface &S, const Standard_Real umin, const Standard_Real umax, const Standard_Real vmin, const Standard_Real vmax, const Standard_Boolean checknaturalbounds=Standard_True)
 
Standard_Boolean ChFi3d_InterPlaneEdge (const Handle< Adaptor3d_HSurface > &Plan, const Handle< Adaptor3d_HCurve > &C, Standard_Real &W, const Standard_Boolean Sens, const Standard_Real tolc)
 
void ChFi3d_ExtrSpineCarac (const TopOpeBRepDS_DataStructure &DStr, const Handle< ChFiDS_Stripe > &cd, const Standard_Integer i, const Standard_Real p, const Standard_Integer jf, const Standard_Integer sens, gp_Pnt &P, gp_Vec &V, Standard_Real &R)
 
Handle< Geom_CircleChFi3d_CircularSpine (Standard_Real &WFirst, Standard_Real &WLast, const gp_Pnt &Pdeb, const gp_Vec &Vdeb, const gp_Pnt &Pfin, const gp_Vec &Vfin, const Standard_Real rad)
 
Handle< Geom_BezierCurveChFi3d_Spine (const gp_Pnt &pd, gp_Vec &vd, const gp_Pnt &pf, gp_Vec &vf, const Standard_Real R)
 
Handle< GeomFill_BoundaryChFi3d_mkbound (const Handle< Adaptor3d_HSurface > &Fac, Handle< Geom2d_Curve > &curv, const Standard_Integer sens1, const gp_Pnt2d &pfac1, const gp_Vec2d &vfac1, const Standard_Integer sens2, const gp_Pnt2d &pfac2, const gp_Vec2d &vfac2, const Standard_Real t3d, const Standard_Real ta)
 
Handle< GeomFill_BoundaryChFi3d_mkbound (const Handle< Adaptor3d_HSurface > &Surf, Handle< Geom2d_Curve > &curv, const Standard_Integer sens1, const gp_Pnt2d &p1, gp_Vec &v1, const Standard_Integer sens2, const gp_Pnt2d &p2, gp_Vec &v2, const Standard_Real t3d, const Standard_Real ta)
 
Handle< GeomFill_BoundaryChFi3d_mkbound (const Handle< Geom_Surface > &s, const gp_Pnt2d &p1, const gp_Pnt2d &p2, const Standard_Real t3d, const Standard_Real ta, const Standard_Boolean isfreeboundary=Standard_False)
 
Handle< GeomFill_BoundaryChFi3d_mkbound (const Handle< Adaptor3d_HSurface > &HS, const gp_Pnt2d &p1, const gp_Pnt2d &p2, const Standard_Real t3d, const Standard_Real ta, const Standard_Boolean isfreeboundary=Standard_False)
 
Handle< GeomFill_BoundaryChFi3d_mkbound (const Handle< Adaptor3d_HSurface > &HS, const Handle< Geom2d_Curve > &curv, const Standard_Real t3d, const Standard_Real ta, const Standard_Boolean isfreeboundary=Standard_False)
 
Handle< GeomFill_BoundaryChFi3d_mkbound (const Handle< Adaptor3d_HSurface > &Fac, Handle< Geom2d_Curve > &curv, const gp_Pnt2d &p1, const gp_Pnt2d &p2, const Standard_Real t3d, const Standard_Real ta, const Standard_Boolean isfreeboundary=Standard_False)
 
void ChFi3d_Coefficient (const gp_Vec &V3d, const gp_Vec &D1u, const gp_Vec &D1v, Standard_Real &DU, Standard_Real &DV)
 
Handle< Geom2d_CurveChFi3d_BuildPCurve (const gp_Pnt2d &p1, gp_Dir2d &d1, const gp_Pnt2d &p2, gp_Dir2d &d2, const Standard_Boolean redresse=Standard_True)
 
Handle< Geom2d_CurveChFi3d_BuildPCurve (const Handle< Adaptor3d_HSurface > &Surf, const gp_Pnt2d &p1, const gp_Vec &v1, const gp_Pnt2d &p2, const gp_Vec &v2, const Standard_Boolean redresse=Standard_False)
 
Handle< Geom2d_CurveChFi3d_BuildPCurve (const Handle< Adaptor3d_HSurface > &Surf, const gp_Pnt2d &p1, const gp_Vec2d &v1, const gp_Pnt2d &p2, const gp_Vec2d &v2, const Standard_Boolean redresse=Standard_False)
 
Standard_Boolean ChFi3d_CheckSameParameter (const Handle< Adaptor3d_HCurve > &C3d, Handle< Geom2d_Curve > &Pcurv, const Handle< Adaptor3d_HSurface > &S, const Standard_Real tol3d, Standard_Real &tolreached)
 
Standard_Boolean ChFi3d_SameParameter (const Handle< Adaptor3d_HCurve > &C3d, Handle< Geom2d_Curve > &Pcurv, const Handle< Adaptor3d_HSurface > &S, const Standard_Real tol3d, Standard_Real &tolreached)
 
Standard_Boolean ChFi3d_SameParameter (const Handle< Geom_Curve > &C3d, Handle< Geom2d_Curve > &Pcurv, const Handle< Geom_Surface > &S, const Standard_Real Pardeb, const Standard_Real Parfin, const Standard_Real tol3d, Standard_Real &tolreached)
 
void ChFi3d_ComputePCurv (const Handle< Geom_Curve > &C3d, const gp_Pnt2d &UV1, const gp_Pnt2d &UV2, Handle< Geom2d_Curve > &Pcurv, const Handle< Geom_Surface > &S, const Standard_Real Pardeb, const Standard_Real Parfin, const Standard_Real tol3d, Standard_Real &tolreached, const Standard_Boolean reverse=Standard_False)
 
void ChFi3d_ComputePCurv (const Handle< Adaptor3d_HCurve > &C3d, const gp_Pnt2d &UV1, const gp_Pnt2d &UV2, Handle< Geom2d_Curve > &Pcurv, const Handle< Adaptor3d_HSurface > &S, const Standard_Real Pardeb, const Standard_Real Parfin, const Standard_Real tol3d, Standard_Real &tolreached, const Standard_Boolean reverse=Standard_False)
 
void ChFi3d_ComputePCurv (const gp_Pnt2d &UV1, const gp_Pnt2d &UV2, Handle< Geom2d_Curve > &Pcurv, const Standard_Real Pardeb, const Standard_Real Parfin, const Standard_Boolean reverse=Standard_False)
 
Standard_Boolean ChFi3d_IntTraces (const Handle< ChFiDS_SurfData > &fd1, const Standard_Real pref1, Standard_Real &p1, const Standard_Integer jf1, const Standard_Integer sens1, const Handle< ChFiDS_SurfData > &fd2, const Standard_Real pref2, Standard_Real &p2, const Standard_Integer jf2, const Standard_Integer sens2, const gp_Pnt2d &RefP2d, const Standard_Boolean Check2dDistance=Standard_False, const Standard_Boolean enlarge=Standard_False)
 
Standard_Boolean ChFi3d_IsInFront (TopOpeBRepDS_DataStructure &DStr, const Handle< ChFiDS_Stripe > &cd1, const Handle< ChFiDS_Stripe > &cd2, const Standard_Integer i1, const Standard_Integer i2, const Standard_Integer sens1, const Standard_Integer sens2, Standard_Real &p1, Standard_Real &p2, TopoDS_Face &face, Standard_Boolean &sameside, Standard_Integer &jf1, Standard_Integer &jf2, Standard_Boolean &visavis, const TopoDS_Vertex &Vtx, const Standard_Boolean Check2dDistance=Standard_False, const Standard_Boolean enlarge=Standard_False)
 
void ChFi3d_ProjectPCurv (const Handle< Adaptor3d_HCurve > &HCg, const Handle< Adaptor3d_HSurface > &HSg, Handle< Geom2d_Curve > &Pcurv, const Standard_Real tol3d, Standard_Real &tolreached)
 
void ChFi3d_ReparamPcurv (const Standard_Real Uf, const Standard_Real Ul, Handle< Geom2d_Curve > &Pcurv)
 
void ChFi3d_ComputeArete (const ChFiDS_CommonPoint &P1, const gp_Pnt2d &UV1, const ChFiDS_CommonPoint &P2, const gp_Pnt2d &UV2, const Handle< Geom_Surface > &Surf, Handle< Geom_Curve > &C3d, Handle< Geom2d_Curve > &Pcurv, Standard_Real &Pardeb, Standard_Real &Parfin, const Standard_Real tol3d, const Standard_Real tol2d, Standard_Real &tolreached, const Standard_Integer IFlag)
 
Handle< TopOpeBRepDS_SurfaceCurveInterferenceChFi3d_FilCurveInDS (const Standard_Integer Icurv, const Standard_Integer Isurf, const Handle< Geom2d_Curve > &Pcurv, const TopAbs_Orientation Et)
 
TopAbs_Orientation ChFi3d_TrsfTrans (const IntSurf_TypeTrans T1)
 
void ChFi3d_FilCommonPoint (const BRepBlend_Extremity &SP, const IntSurf_TypeTrans TransLine, const Standard_Boolean Start, ChFiDS_CommonPoint &CP, const Standard_Real Tol)
 
Standard_Integer ChFi3d_SolidIndex (const Handle< ChFiDS_Spine > &sp, TopOpeBRepDS_DataStructure &DStr, ChFiDS_Map &MapESo, ChFiDS_Map &MapESh)
 
Standard_Integer ChFi3d_IndexPointInDS (const ChFiDS_CommonPoint &P1, TopOpeBRepDS_DataStructure &DStr)
 
Handle< TopOpeBRepDS_CurvePointInterferenceChFi3d_FilPointInDS (const TopAbs_Orientation Et, const Standard_Integer Ic, const Standard_Integer Ip, const Standard_Real Par, const Standard_Boolean IsVertex=Standard_False)
 
Handle< TopOpeBRepDS_CurvePointInterferenceChFi3d_FilVertexInDS (const TopAbs_Orientation Et, const Standard_Integer Ic, const Standard_Integer Ip, const Standard_Real Par)
 
void ChFi3d_FilDS (const Standard_Integer SolidIndex, const Handle< ChFiDS_Stripe > &CorDat, TopOpeBRepDS_DataStructure &DStr, ChFiDS_Regularities &reglist, const Standard_Real tol3d, const Standard_Real tol2d)
 
void ChFi3d_StripeEdgeInter (const Handle< ChFiDS_Stripe > &theStripe1, const Handle< ChFiDS_Stripe > &theStripe2, TopOpeBRepDS_DataStructure &DStr, const Standard_Real tol2d)
 
Standard_Integer ChFi3d_IndexOfSurfData (const TopoDS_Vertex &V1, const Handle< ChFiDS_Stripe > &CD, Standard_Integer &sens)
 
TopoDS_Edge ChFi3d_EdgeFromV1 (const TopoDS_Vertex &V1, const Handle< ChFiDS_Stripe > &CD, Standard_Integer &sens)
 
Standard_Real ChFi3d_ConvTol2dToTol3d (const Handle< Adaptor3d_HSurface > &S, const Standard_Real tol2d)
 
Standard_Boolean ChFi3d_ComputeCurves (const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor3d_HSurface > &S2, const TColStd_Array1OfReal &Pardeb, const TColStd_Array1OfReal &Parfin, Handle< Geom_Curve > &C3d, Handle< Geom2d_Curve > &Pc1, Handle< Geom2d_Curve > &Pc2, const Standard_Real tol3d, const Standard_Real tol2d, Standard_Real &tolreached, const Standard_Boolean wholeCurv=Standard_True)
 
Standard_Boolean ChFi3d_IntCS (const Handle< Adaptor3d_HSurface > &S, const Handle< Adaptor3d_HCurve > &C, gp_Pnt2d &p2dS, Standard_Real &wc)
 
void ChFi3d_ComputesIntPC (const ChFiDS_FaceInterference &Fi1, const ChFiDS_FaceInterference &Fi2, const Handle< GeomAdaptor_HSurface > &HS1, const Handle< GeomAdaptor_HSurface > &HS2, Standard_Real &UInt1, Standard_Real &UInt2)
 
void ChFi3d_ComputesIntPC (const ChFiDS_FaceInterference &Fi1, const ChFiDS_FaceInterference &Fi2, const Handle< GeomAdaptor_HSurface > &HS1, const Handle< GeomAdaptor_HSurface > &HS2, Standard_Real &UInt1, Standard_Real &UInt2, gp_Pnt &P)
 
Handle< GeomAdaptor_HSurfaceChFi3d_BoundSurf (TopOpeBRepDS_DataStructure &DStr, const Handle< ChFiDS_SurfData > &Fd1, const Standard_Integer &IFaCo1, const Standard_Integer &IFaArc1)
 
Standard_Integer ChFi3d_SearchPivot (Standard_Integer *s, Standard_Real u[3][3], const Standard_Real t)
 
Standard_Boolean ChFi3d_SearchFD (TopOpeBRepDS_DataStructure &DStr, const Handle< ChFiDS_Stripe > &cd1, const Handle< ChFiDS_Stripe > &cd2, const Standard_Integer sens1, const Standard_Integer sens2, Standard_Integer &i1, Standard_Integer &i2, Standard_Real &p1, Standard_Real &p2, const Standard_Integer ind1, const Standard_Integer ind2, TopoDS_Face &face, Standard_Boolean &sameside, Standard_Integer &jf1, Standard_Integer &jf2)
 
void ChFi3d_Parameters (const Handle< Geom_Surface > &S, const gp_Pnt &p3d, Standard_Real &u, Standard_Real &v)
 
void ChFi3d_TrimCurve (const Handle< Geom_Curve > &gc, const gp_Pnt &FirstP, const gp_Pnt &LastP, Handle< Geom_TrimmedCurve > &gtc)
 
void ChFi3d_PerformElSpine (Handle< ChFiDS_HElSpine > &HES, Handle< ChFiDS_Spine > &Spine, const GeomAbs_Shape continuity, const Standard_Real tol, const Standard_Boolean IsOffset=Standard_False)
 
TopoDS_Face ChFi3d_EnlargeFace (const Handle< ChFiDS_Spine > &Spine, const Handle< BRepAdaptor_HSurface > &HS, const Standard_Real Tol)
 
void ChFi3d_cherche_face1 (const TopTools_ListOfShape &map, const TopoDS_Face &F1, TopoDS_Face &F)
 
void ChFi3d_cherche_element (const TopoDS_Vertex &V, const TopoDS_Edge &E1, const TopoDS_Face &F1, TopoDS_Edge &E, TopoDS_Vertex &Vtx)
 
Standard_Real ChFi3d_EvalTolReached (const Handle< Adaptor3d_HSurface > &S1, const Handle< Geom2d_Curve > &pc1, const Handle< Adaptor3d_HSurface > &S2, const Handle< Geom2d_Curve > &pc2, const Handle< Geom_Curve > &C)
 
void ChFi3d_cherche_edge (const TopoDS_Vertex &V, const TopTools_Array1OfShape &E1, const TopoDS_Face &F1, TopoDS_Edge &E, TopoDS_Vertex &Vtx)
 
Standard_Integer ChFi3d_nbface (const TopTools_ListOfShape &mapVF)
 
void ChFi3d_edge_common_faces (const TopTools_ListOfShape &mapEF, TopoDS_Face &F1, TopoDS_Face &F2)
 
Standard_Real ChFi3d_AngleEdge (const TopoDS_Vertex &Vtx, const TopoDS_Edge &E1, const TopoDS_Edge &E2)
 
void ChFi3d_ChercheBordsLibres (const ChFiDS_Map &myVEMap, const TopoDS_Vertex &V1, Standard_Boolean &bordlibre, TopoDS_Edge &edgelibre1, TopoDS_Edge &edgelibre2)
 
Standard_Integer ChFi3d_NbNotDegeneratedEdges (const TopoDS_Vertex &Vtx, const ChFiDS_Map &VEMap)
 
Standard_Integer ChFi3d_NumberOfEdges (const TopoDS_Vertex &Vtx, const ChFiDS_Map &VEMap)
 
Standard_Integer ChFi3d_NumberOfSharpEdges (const TopoDS_Vertex &Vtx, const ChFiDS_Map &VEMap, const ChFiDS_Map &EFmap)
 
void ChFi3d_cherche_vertex (const TopoDS_Edge &E1, const TopoDS_Edge &E2, TopoDS_Vertex &vertex, Standard_Boolean &trouve)
 
void ChFi3d_Couture (const TopoDS_Face &F, Standard_Boolean &couture, TopoDS_Edge &edgecouture)
 
void ChFi3d_CoutureOnVertex (const TopoDS_Face &F, const TopoDS_Vertex &V, Standard_Boolean &couture, TopoDS_Edge &edgecouture)
 
Standard_Boolean ChFi3d_IsPseudoSeam (const TopoDS_Edge &E, const TopoDS_Face &F)
 
Handle< Geom_BSplineCurveChFi3d_ApproxByC2 (const Handle< Geom_Curve > &C)
 
Standard_Boolean ChFi3d_IsSmooth (const Handle< Geom_Curve > &C)
 

Function Documentation

◆ ChFi3d_AngleEdge()

Standard_Real ChFi3d_AngleEdge ( const TopoDS_Vertex Vtx,
const TopoDS_Edge E1,
const TopoDS_Edge E2 
)

◆ ChFi3d_ApproxByC2()

Handle< Geom_BSplineCurve > ChFi3d_ApproxByC2 ( const Handle< Geom_Curve > &  C)

◆ ChFi3d_Boite() [1/2]

void ChFi3d_Boite ( const gp_Pnt2d p1,
const gp_Pnt2d p2,
Standard_Real mu,
Standard_Real Mu,
Standard_Real mv,
Standard_Real Mv 
)

◆ ChFi3d_Boite() [2/2]

void ChFi3d_Boite ( const gp_Pnt2d p1,
const gp_Pnt2d p2,
const gp_Pnt2d p3,
const gp_Pnt2d p4,
Standard_Real Du,
Standard_Real Dv,
Standard_Real mu,
Standard_Real Mu,
Standard_Real mv,
Standard_Real Mv 
)

◆ ChFi3d_BoundFac()

void ChFi3d_BoundFac ( BRepAdaptor_Surface S,
const Standard_Real  umin,
const Standard_Real  umax,
const Standard_Real  vmin,
const Standard_Real  vmax,
const Standard_Boolean  checknaturalbounds = Standard_True 
)

◆ ChFi3d_BoundSrf()

void ChFi3d_BoundSrf ( GeomAdaptor_Surface S,
const Standard_Real  umin,
const Standard_Real  umax,
const Standard_Real  vmin,
const Standard_Real  vmax,
const Standard_Boolean  checknaturalbounds = Standard_True 
)

◆ ChFi3d_BoundSurf()

Handle< GeomAdaptor_HSurface > ChFi3d_BoundSurf ( TopOpeBRepDS_DataStructure DStr,
const Handle< ChFiDS_SurfData > &  Fd1,
const Standard_Integer IFaCo1,
const Standard_Integer IFaArc1 
)

◆ ChFi3d_BuildPCurve() [1/3]

Handle< Geom2d_Curve > ChFi3d_BuildPCurve ( const gp_Pnt2d p1,
gp_Dir2d d1,
const gp_Pnt2d p2,
gp_Dir2d d2,
const Standard_Boolean  redresse = Standard_True 
)

◆ ChFi3d_BuildPCurve() [2/3]

Handle< Geom2d_Curve > ChFi3d_BuildPCurve ( const Handle< Adaptor3d_HSurface > &  Surf,
const gp_Pnt2d p1,
const gp_Vec v1,
const gp_Pnt2d p2,
const gp_Vec v2,
const Standard_Boolean  redresse = Standard_False 
)

◆ ChFi3d_BuildPCurve() [3/3]

Handle< Geom2d_Curve > ChFi3d_BuildPCurve ( const Handle< Adaptor3d_HSurface > &  Surf,
const gp_Pnt2d p1,
const gp_Vec2d v1,
const gp_Pnt2d p2,
const gp_Vec2d v2,
const Standard_Boolean  redresse = Standard_False 
)

◆ ChFi3d_CheckSameParameter()

Standard_Boolean ChFi3d_CheckSameParameter ( const Handle< Adaptor3d_HCurve > &  C3d,
Handle< Geom2d_Curve > &  Pcurv,
const Handle< Adaptor3d_HSurface > &  S,
const Standard_Real  tol3d,
Standard_Real tolreached 
)

◆ ChFi3d_cherche_edge()

void ChFi3d_cherche_edge ( const TopoDS_Vertex V,
const TopTools_Array1OfShape E1,
const TopoDS_Face F1,
TopoDS_Edge E,
TopoDS_Vertex Vtx 
)

◆ ChFi3d_cherche_element()

void ChFi3d_cherche_element ( const TopoDS_Vertex V,
const TopoDS_Edge E1,
const TopoDS_Face F1,
TopoDS_Edge E,
TopoDS_Vertex Vtx 
)

◆ ChFi3d_cherche_face1()

void ChFi3d_cherche_face1 ( const TopTools_ListOfShape map,
const TopoDS_Face F1,
TopoDS_Face F 
)

◆ ChFi3d_cherche_vertex()

void ChFi3d_cherche_vertex ( const TopoDS_Edge E1,
const TopoDS_Edge E2,
TopoDS_Vertex vertex,
Standard_Boolean trouve 
)

◆ ChFi3d_ChercheBordsLibres()

void ChFi3d_ChercheBordsLibres ( const ChFiDS_Map myVEMap,
const TopoDS_Vertex V1,
Standard_Boolean bordlibre,
TopoDS_Edge edgelibre1,
TopoDS_Edge edgelibre2 
)

◆ ChFi3d_CircularSpine()

Handle< Geom_Circle > ChFi3d_CircularSpine ( Standard_Real WFirst,
Standard_Real WLast,
const gp_Pnt Pdeb,
const gp_Vec Vdeb,
const gp_Pnt Pfin,
const gp_Vec Vfin,
const Standard_Real  rad 
)

◆ ChFi3d_Coefficient()

void ChFi3d_Coefficient ( const gp_Vec V3d,
const gp_Vec D1u,
const gp_Vec D1v,
Standard_Real DU,
Standard_Real DV 
)

◆ ChFi3d_ComputeArete()

void ChFi3d_ComputeArete ( const ChFiDS_CommonPoint P1,
const gp_Pnt2d UV1,
const ChFiDS_CommonPoint P2,
const gp_Pnt2d UV2,
const Handle< Geom_Surface > &  Surf,
Handle< Geom_Curve > &  C3d,
Handle< Geom2d_Curve > &  Pcurv,
Standard_Real Pardeb,
Standard_Real Parfin,
const Standard_Real  tol3d,
const Standard_Real  tol2d,
Standard_Real tolreached,
const Standard_Integer  IFlag 
)

◆ ChFi3d_ComputeCurves()

Standard_Boolean ChFi3d_ComputeCurves ( const Handle< Adaptor3d_HSurface > &  S1,
const Handle< Adaptor3d_HSurface > &  S2,
const TColStd_Array1OfReal Pardeb,
const TColStd_Array1OfReal Parfin,
Handle< Geom_Curve > &  C3d,
Handle< Geom2d_Curve > &  Pc1,
Handle< Geom2d_Curve > &  Pc2,
const Standard_Real  tol3d,
const Standard_Real  tol2d,
Standard_Real tolreached,
const Standard_Boolean  wholeCurv = Standard_True 
)

◆ ChFi3d_ComputePCurv() [1/3]

void ChFi3d_ComputePCurv ( const Handle< Geom_Curve > &  C3d,
const gp_Pnt2d UV1,
const gp_Pnt2d UV2,
Handle< Geom2d_Curve > &  Pcurv,
const Handle< Geom_Surface > &  S,
const Standard_Real  Pardeb,
const Standard_Real  Parfin,
const Standard_Real  tol3d,
Standard_Real tolreached,
const Standard_Boolean  reverse = Standard_False 
)

◆ ChFi3d_ComputePCurv() [2/3]

void ChFi3d_ComputePCurv ( const Handle< Adaptor3d_HCurve > &  C3d,
const gp_Pnt2d UV1,
const gp_Pnt2d UV2,
Handle< Geom2d_Curve > &  Pcurv,
const Handle< Adaptor3d_HSurface > &  S,
const Standard_Real  Pardeb,
const Standard_Real  Parfin,
const Standard_Real  tol3d,
Standard_Real tolreached,
const Standard_Boolean  reverse = Standard_False 
)

◆ ChFi3d_ComputePCurv() [3/3]

void ChFi3d_ComputePCurv ( const gp_Pnt2d UV1,
const gp_Pnt2d UV2,
Handle< Geom2d_Curve > &  Pcurv,
const Standard_Real  Pardeb,
const Standard_Real  Parfin,
const Standard_Boolean  reverse = Standard_False 
)

◆ ChFi3d_ComputesIntPC() [1/2]

void ChFi3d_ComputesIntPC ( const ChFiDS_FaceInterference Fi1,
const ChFiDS_FaceInterference Fi2,
const Handle< GeomAdaptor_HSurface > &  HS1,
const Handle< GeomAdaptor_HSurface > &  HS2,
Standard_Real UInt1,
Standard_Real UInt2 
)

◆ ChFi3d_ComputesIntPC() [2/2]

void ChFi3d_ComputesIntPC ( const ChFiDS_FaceInterference Fi1,
const ChFiDS_FaceInterference Fi2,
const Handle< GeomAdaptor_HSurface > &  HS1,
const Handle< GeomAdaptor_HSurface > &  HS2,
Standard_Real UInt1,
Standard_Real UInt2,
gp_Pnt P 
)

◆ ChFi3d_conexfaces()

void ChFi3d_conexfaces ( const TopoDS_Edge E,
TopoDS_Face F1,
TopoDS_Face F2,
const ChFiDS_Map EFMap 
)

◆ ChFi3d_ConvTol2dToTol3d()

Standard_Real ChFi3d_ConvTol2dToTol3d ( const Handle< Adaptor3d_HSurface > &  S,
const Standard_Real  tol2d 
)

◆ ChFi3d_Couture()

void ChFi3d_Couture ( const TopoDS_Face F,
Standard_Boolean couture,
TopoDS_Edge edgecouture 
)

◆ ChFi3d_CoutureOnVertex()

void ChFi3d_CoutureOnVertex ( const TopoDS_Face F,
const TopoDS_Vertex V,
Standard_Boolean couture,
TopoDS_Edge edgecouture 
)

◆ ChFi3d_edge_common_faces()

void ChFi3d_edge_common_faces ( const TopTools_ListOfShape mapEF,
TopoDS_Face F1,
TopoDS_Face F2 
)

◆ ChFi3d_EdgeFromV1()

TopoDS_Edge ChFi3d_EdgeFromV1 ( const TopoDS_Vertex V1,
const Handle< ChFiDS_Stripe > &  CD,
Standard_Integer sens 
)

◆ ChFi3d_EdgeState()

ChFiDS_State ChFi3d_EdgeState ( TopoDS_Edge E,
const ChFiDS_Map EFMap 
)

◆ ChFi3d_EnlargeBox() [1/4]

void ChFi3d_EnlargeBox ( const Handle< Geom_Curve > &  C,
const Standard_Real  wd,
const Standard_Real  wf,
Bnd_Box box1,
Bnd_Box box2 
)

◆ ChFi3d_EnlargeBox() [2/4]

void ChFi3d_EnlargeBox ( const Handle< Adaptor3d_HSurface > &  S,
const Handle< Geom2d_Curve > &  PC,
const Standard_Real  wd,
const Standard_Real  wf,
Bnd_Box box1,
Bnd_Box box2 
)

◆ ChFi3d_EnlargeBox() [3/4]

void ChFi3d_EnlargeBox ( const TopoDS_Edge E,
const TopTools_ListOfShape LF,
const Standard_Real  w,
Bnd_Box box 
)

◆ ChFi3d_EnlargeBox() [4/4]

void ChFi3d_EnlargeBox ( TopOpeBRepDS_DataStructure DStr,
const Handle< ChFiDS_Stripe > &  st,
const Handle< ChFiDS_SurfData > &  sd,
Bnd_Box b1,
Bnd_Box b2,
const Standard_Boolean  isfirst 
)

◆ ChFi3d_EnlargeFace()

TopoDS_Face ChFi3d_EnlargeFace ( const Handle< ChFiDS_Spine > &  Spine,
const Handle< BRepAdaptor_HSurface > &  HS,
const Standard_Real  Tol 
)

◆ ChFi3d_evalconti()

GeomAbs_Shape ChFi3d_evalconti ( const TopoDS_Edge E,
const TopoDS_Face F1,
const TopoDS_Face F2 
)

◆ ChFi3d_EvalTolReached()

Standard_Real ChFi3d_EvalTolReached ( const Handle< Adaptor3d_HSurface > &  S1,
const Handle< Geom2d_Curve > &  pc1,
const Handle< Adaptor3d_HSurface > &  S2,
const Handle< Geom2d_Curve > &  pc2,
const Handle< Geom_Curve > &  C 
)

◆ ChFi3d_ExtrSpineCarac()

void ChFi3d_ExtrSpineCarac ( const TopOpeBRepDS_DataStructure DStr,
const Handle< ChFiDS_Stripe > &  cd,
const Standard_Integer  i,
const Standard_Real  p,
const Standard_Integer  jf,
const Standard_Integer  sens,
gp_Pnt P,
gp_Vec V,
Standard_Real R 
)

◆ ChFi3d_FilCommonPoint()

void ChFi3d_FilCommonPoint ( const BRepBlend_Extremity SP,
const IntSurf_TypeTrans  TransLine,
const Standard_Boolean  Start,
ChFiDS_CommonPoint CP,
const Standard_Real  Tol 
)

◆ ChFi3d_FilCurveInDS()

Handle< TopOpeBRepDS_SurfaceCurveInterference > ChFi3d_FilCurveInDS ( const Standard_Integer  Icurv,
const Standard_Integer  Isurf,
const Handle< Geom2d_Curve > &  Pcurv,
const TopAbs_Orientation  Et 
)

◆ ChFi3d_FilDS()

void ChFi3d_FilDS ( const Standard_Integer  SolidIndex,
const Handle< ChFiDS_Stripe > &  CorDat,
TopOpeBRepDS_DataStructure DStr,
ChFiDS_Regularities reglist,
const Standard_Real  tol3d,
const Standard_Real  tol2d 
)

◆ ChFi3d_FilPointInDS()

Handle< TopOpeBRepDS_CurvePointInterference > ChFi3d_FilPointInDS ( const TopAbs_Orientation  Et,
const Standard_Integer  Ic,
const Standard_Integer  Ip,
const Standard_Real  Par,
const Standard_Boolean  IsVertex = Standard_False 
)

◆ ChFi3d_FilVertexInDS()

Handle< TopOpeBRepDS_CurvePointInterference > ChFi3d_FilVertexInDS ( const TopAbs_Orientation  Et,
const Standard_Integer  Ic,
const Standard_Integer  Ip,
const Standard_Real  Par 
)

◆ ChFi3d_IndexOfSurfData()

Standard_Integer ChFi3d_IndexOfSurfData ( const TopoDS_Vertex V1,
const Handle< ChFiDS_Stripe > &  CD,
Standard_Integer sens 
)

◆ ChFi3d_IndexPointInDS()

Standard_Integer ChFi3d_IndexPointInDS ( const ChFiDS_CommonPoint P1,
TopOpeBRepDS_DataStructure DStr 
)

◆ ChFi3d_InPeriod()

Standard_Real ChFi3d_InPeriod ( const Standard_Real  U,
const Standard_Real  UFirst,
const Standard_Real  ULast,
const Standard_Real  Eps 
)

◆ ChFi3d_IntCS()

Standard_Boolean ChFi3d_IntCS ( const Handle< Adaptor3d_HSurface > &  S,
const Handle< Adaptor3d_HCurve > &  C,
gp_Pnt2d p2dS,
Standard_Real wc 
)

◆ ChFi3d_InterPlaneEdge()

Standard_Boolean ChFi3d_InterPlaneEdge ( const Handle< Adaptor3d_HSurface > &  Plan,
const Handle< Adaptor3d_HCurve > &  C,
Standard_Real W,
const Standard_Boolean  Sens,
const Standard_Real  tolc 
)

◆ ChFi3d_IntTraces()

Standard_Boolean ChFi3d_IntTraces ( const Handle< ChFiDS_SurfData > &  fd1,
const Standard_Real  pref1,
Standard_Real p1,
const Standard_Integer  jf1,
const Standard_Integer  sens1,
const Handle< ChFiDS_SurfData > &  fd2,
const Standard_Real  pref2,
Standard_Real p2,
const Standard_Integer  jf2,
const Standard_Integer  sens2,
const gp_Pnt2d RefP2d,
const Standard_Boolean  Check2dDistance = Standard_False,
const Standard_Boolean  enlarge = Standard_False 
)

◆ ChFi3d_IsInFront()

Standard_Boolean ChFi3d_IsInFront ( TopOpeBRepDS_DataStructure DStr,
const Handle< ChFiDS_Stripe > &  cd1,
const Handle< ChFiDS_Stripe > &  cd2,
const Standard_Integer  i1,
const Standard_Integer  i2,
const Standard_Integer  sens1,
const Standard_Integer  sens2,
Standard_Real p1,
Standard_Real p2,
TopoDS_Face face,
Standard_Boolean sameside,
Standard_Integer jf1,
Standard_Integer jf2,
Standard_Boolean visavis,
const TopoDS_Vertex Vtx,
const Standard_Boolean  Check2dDistance = Standard_False,
const Standard_Boolean  enlarge = Standard_False 
)

◆ ChFi3d_IsPseudoSeam()

Standard_Boolean ChFi3d_IsPseudoSeam ( const TopoDS_Edge E,
const TopoDS_Face F 
)

◆ ChFi3d_IsSmooth()

Standard_Boolean ChFi3d_IsSmooth ( const Handle< Geom_Curve > &  C)

◆ ChFi3d_KParticular()

Standard_Boolean ChFi3d_KParticular ( const Handle< ChFiDS_Spine > &  Spine,
const Standard_Integer  IE,
const BRepAdaptor_Surface S1,
const BRepAdaptor_Surface S2 
)

◆ ChFi3d_mkbound() [1/6]

Handle< GeomFill_Boundary > ChFi3d_mkbound ( const Handle< Adaptor3d_HSurface > &  Fac,
Handle< Geom2d_Curve > &  curv,
const Standard_Integer  sens1,
const gp_Pnt2d pfac1,
const gp_Vec2d vfac1,
const Standard_Integer  sens2,
const gp_Pnt2d pfac2,
const gp_Vec2d vfac2,
const Standard_Real  t3d,
const Standard_Real  ta 
)

◆ ChFi3d_mkbound() [2/6]

Handle< GeomFill_Boundary > ChFi3d_mkbound ( const Handle< Adaptor3d_HSurface > &  Surf,
Handle< Geom2d_Curve > &  curv,
const Standard_Integer  sens1,
const gp_Pnt2d p1,
gp_Vec v1,
const Standard_Integer  sens2,
const gp_Pnt2d p2,
gp_Vec v2,
const Standard_Real  t3d,
const Standard_Real  ta 
)

◆ ChFi3d_mkbound() [3/6]

Handle< GeomFill_Boundary > ChFi3d_mkbound ( const Handle< Geom_Surface > &  s,
const gp_Pnt2d p1,
const gp_Pnt2d p2,
const Standard_Real  t3d,
const Standard_Real  ta,
const Standard_Boolean  isfreeboundary = Standard_False 
)

◆ ChFi3d_mkbound() [4/6]

Handle< GeomFill_Boundary > ChFi3d_mkbound ( const Handle< Adaptor3d_HSurface > &  HS,
const gp_Pnt2d p1,
const gp_Pnt2d p2,
const Standard_Real  t3d,
const Standard_Real  ta,
const Standard_Boolean  isfreeboundary = Standard_False 
)

◆ ChFi3d_mkbound() [5/6]

Handle< GeomFill_Boundary > ChFi3d_mkbound ( const Handle< Adaptor3d_HSurface > &  HS,
const Handle< Geom2d_Curve > &  curv,
const Standard_Real  t3d,
const Standard_Real  ta,
const Standard_Boolean  isfreeboundary = Standard_False 
)

◆ ChFi3d_mkbound() [6/6]

Handle< GeomFill_Boundary > ChFi3d_mkbound ( const Handle< Adaptor3d_HSurface > &  Fac,
Handle< Geom2d_Curve > &  curv,
const gp_Pnt2d p1,
const gp_Pnt2d p2,
const Standard_Real  t3d,
const Standard_Real  ta,
const Standard_Boolean  isfreeboundary = Standard_False 
)

◆ ChFi3d_nbface()

Standard_Integer ChFi3d_nbface ( const TopTools_ListOfShape mapVF)

◆ ChFi3d_NbNotDegeneratedEdges()

Standard_Integer ChFi3d_NbNotDegeneratedEdges ( const TopoDS_Vertex Vtx,
const ChFiDS_Map VEMap 
)

◆ ChFi3d_NumberOfEdges()

Standard_Integer ChFi3d_NumberOfEdges ( const TopoDS_Vertex Vtx,
const ChFiDS_Map VEMap 
)

◆ ChFi3d_NumberOfSharpEdges()

Standard_Integer ChFi3d_NumberOfSharpEdges ( const TopoDS_Vertex Vtx,
const ChFiDS_Map VEMap,
const ChFiDS_Map EFmap 
)

◆ ChFi3d_Parameters()

void ChFi3d_Parameters ( const Handle< Geom_Surface > &  S,
const gp_Pnt p3d,
Standard_Real u,
Standard_Real v 
)

◆ ChFi3d_PerformElSpine()

void ChFi3d_PerformElSpine ( Handle< ChFiDS_HElSpine > &  HES,
Handle< ChFiDS_Spine > &  Spine,
const GeomAbs_Shape  continuity,
const Standard_Real  tol,
const Standard_Boolean  IsOffset = Standard_False 
)

◆ ChFi3d_ProjectPCurv()

void ChFi3d_ProjectPCurv ( const Handle< Adaptor3d_HCurve > &  HCg,
const Handle< Adaptor3d_HSurface > &  HSg,
Handle< Geom2d_Curve > &  Pcurv,
const Standard_Real  tol3d,
Standard_Real tolreached 
)

◆ ChFi3d_ReparamPcurv()

void ChFi3d_ReparamPcurv ( const Standard_Real  Uf,
const Standard_Real  Ul,
Handle< Geom2d_Curve > &  Pcurv 
)

◆ ChFi3d_SameParameter() [1/2]

Standard_Boolean ChFi3d_SameParameter ( const Handle< Adaptor3d_HCurve > &  C3d,
Handle< Geom2d_Curve > &  Pcurv,
const Handle< Adaptor3d_HSurface > &  S,
const Standard_Real  tol3d,
Standard_Real tolreached 
)

◆ ChFi3d_SameParameter() [2/2]

Standard_Boolean ChFi3d_SameParameter ( const Handle< Geom_Curve > &  C3d,
Handle< Geom2d_Curve > &  Pcurv,
const Handle< Geom_Surface > &  S,
const Standard_Real  Pardeb,
const Standard_Real  Parfin,
const Standard_Real  tol3d,
Standard_Real tolreached 
)

◆ ChFi3d_SearchFD()

Standard_Boolean ChFi3d_SearchFD ( TopOpeBRepDS_DataStructure DStr,
const Handle< ChFiDS_Stripe > &  cd1,
const Handle< ChFiDS_Stripe > &  cd2,
const Standard_Integer  sens1,
const Standard_Integer  sens2,
Standard_Integer i1,
Standard_Integer i2,
Standard_Real p1,
Standard_Real p2,
const Standard_Integer  ind1,
const Standard_Integer  ind2,
TopoDS_Face face,
Standard_Boolean sameside,
Standard_Integer jf1,
Standard_Integer jf2 
)

◆ ChFi3d_SearchPivot()

Standard_Integer ChFi3d_SearchPivot ( Standard_Integer s,
Standard_Real  u[3][3],
const Standard_Real  t 
)

◆ ChFi3d_SetPointTolerance()

void ChFi3d_SetPointTolerance ( TopOpeBRepDS_DataStructure DStr,
const Bnd_Box box,
const Standard_Integer  IP 
)

◆ ChFi3d_SolidIndex()

Standard_Integer ChFi3d_SolidIndex ( const Handle< ChFiDS_Spine > &  sp,
TopOpeBRepDS_DataStructure DStr,
ChFiDS_Map MapESo,
ChFiDS_Map MapESh 
)

◆ ChFi3d_Spine()

Handle< Geom_BezierCurve > ChFi3d_Spine ( const gp_Pnt pd,
gp_Vec vd,
const gp_Pnt pf,
gp_Vec vf,
const Standard_Real  R 
)

◆ ChFi3d_StripeEdgeInter()

void ChFi3d_StripeEdgeInter ( const Handle< ChFiDS_Stripe > &  theStripe1,
const Handle< ChFiDS_Stripe > &  theStripe2,
TopOpeBRepDS_DataStructure DStr,
const Standard_Real  tol2d 
)

◆ ChFi3d_TrimCurve()

void ChFi3d_TrimCurve ( const Handle< Geom_Curve > &  gc,
const gp_Pnt FirstP,
const gp_Pnt LastP,
Handle< Geom_TrimmedCurve > &  gtc 
)

◆ ChFi3d_TrsfTrans()

TopAbs_Orientation ChFi3d_TrsfTrans ( const IntSurf_TypeTrans  T1)