Open CASCADE Technology  6.9.1
Public Member Functions | Protected Attributes
GeomPlate_PointConstraint Class Reference

Defines points as constraints to be used to deform a surface. More...

#include <GeomPlate_PointConstraint.hxx>

Inheritance diagram for GeomPlate_PointConstraint:
Inheritance graph
[legend]

Public Member Functions

 GeomPlate_PointConstraint (const gp_Pnt &Pt, const Standard_Integer Order, const Standard_Real TolDist=0.0001)
 Constructs a point constraint object defined by Pt, a 3D point Order gives the order of constraint, one of: More...
 
 GeomPlate_PointConstraint (const Standard_Real U, const Standard_Real V, const Handle< Geom_Surface > &Surf, const Standard_Integer Order, const Standard_Real TolDist=0.0001, const Standard_Real TolAng=0.01, const Standard_Real TolCurv=0.1)
 Constructs a point constraint object defined by the intersection point of U and V on the surface Surf. Order gives the order of constraint, one of: More...
 
void SetOrder (const Standard_Integer Order)
 
Standard_Integer Order () const
 Returns the order of constraint: G0, G1, and G2, controlled respectively by G0Criterion G1Criterion and G2Criterion. More...
 
void SetG0Criterion (const Standard_Real TolDist)
 Allows you to set the G0 criterion. This is the law defining the greatest distance allowed between the constraint and the target surface. If this criterion is not set, {TolDist, the distance tolerance from the constructor, is used. More...
 
void SetG1Criterion (const Standard_Real TolAng)
 Allows you to set the G1 criterion. This is the law defining the greatest angle allowed between the constraint and the target surface. If this criterion is not set, TolAng, the angular tolerance from the constructor, is used. Raises ConstructionError if the point is not on the surface. More...
 
void SetG2Criterion (const Standard_Real TolCurv)
 Allows you to set the G2 criterion. This is the law defining the greatest difference in curvature allowed between the constraint and the target surface. If this criterion is not set, TolCurv, the curvature tolerance from the constructor, is used. Raises ConstructionError if the point is not on the surface. More...
 
Standard_Real G0Criterion () const
 Returns the G0 criterion. This is the greatest distance allowed between the constraint and the target surface. More...
 
Standard_Real G1Criterion () const
 Returns the G1 criterion. This is the greatest angle allowed between the constraint and the target surface. Raises ConstructionError if the point is not on the surface. More...
 
Standard_Real G2Criterion () const
 Returns the G2 criterion. This is the greatest difference in curvature allowed between the constraint and the target surface. Raises ConstructionError if the point is not on the surface. More...
 
void D0 (gp_Pnt &P) const
 
void D1 (gp_Pnt &P, gp_Vec &V1, gp_Vec &V2) const
 
void D2 (gp_Pnt &P, gp_Vec &V1, gp_Vec &V2, gp_Vec &V3, gp_Vec &V4, gp_Vec &V5) const
 
Standard_Boolean HasPnt2dOnSurf () const
 
void SetPnt2dOnSurf (const gp_Pnt2d &Pnt)
 
gp_Pnt2d Pnt2dOnSurf () const
 
GeomLProp_SLPropsLPropSurf ()
 
- Public Member Functions inherited from MMgt_TShared
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual const Handle_Standard_Type & DynamicType () const
 Returns a type information object about this object. More...
 
Standard_Boolean IsInstance (const Handle_Standard_Type &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const Handle_Standard_Type &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
virtual Handle_Standard_Transient This () const
 Returns a Handle which references this object. Must never be called to objects created in stack. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 

Protected Attributes

Standard_Integer myOrder
 

Detailed Description

Defines points as constraints to be used to deform a surface.

Constructor & Destructor Documentation

GeomPlate_PointConstraint::GeomPlate_PointConstraint ( const gp_Pnt Pt,
const Standard_Integer  Order,
const Standard_Real  TolDist = 0.0001 
)

Constructs a point constraint object defined by Pt, a 3D point Order gives the order of constraint, one of:

  • -1 i.e. none, or 0 i.e.G0 when assigned to Pt
  • -1 i.e. none, 0 i.e. G0, 1 i.e. G1, 2 i.e. G2 when assigned to U, V and Surf. In this constructor, only TolDist is given. Distance tolerance represents the greatest distance allowed between the constraint and the target surface. Angular tolerance represents the largest angle allowed between the constraint and the target surface. Curvature tolerance represents the greatest difference in curvature allowed between the constraint and the target surface. Raises ConstructionError if Order is not 0 or -1
GeomPlate_PointConstraint::GeomPlate_PointConstraint ( const Standard_Real  U,
const Standard_Real  V,
const Handle< Geom_Surface > &  Surf,
const Standard_Integer  Order,
const Standard_Real  TolDist = 0.0001,
const Standard_Real  TolAng = 0.01,
const Standard_Real  TolCurv = 0.1 
)

Constructs a point constraint object defined by the intersection point of U and V on the surface Surf. Order gives the order of constraint, one of:

  • -1 i.e. none, or 0 i.e.G0 when assigned to Pt
  • -1 i.e. none, 0 i.e. G0, 1 i.e. G1, 2 i.e. G2 when assigned to U, V and Surf. In this constructor the surface to be generated must respect several tolerance values only:
  • the distance tolerance TolDist
  • the angular tolerance TolAng
  • the curvature tolerance, TolCurv. Distance tolerance represents the greatest distance allowed between the constraint and the target surface. Angular tolerance represents the largest angle allowed between the constraint and the target surface. Curvature tolerance represents the greatest difference in curvature allowed between the constraint and the target surface.Creates a punctual constraint.

Member Function Documentation

void GeomPlate_PointConstraint::D0 ( gp_Pnt P) const
void GeomPlate_PointConstraint::D1 ( gp_Pnt P,
gp_Vec V1,
gp_Vec V2 
) const
void GeomPlate_PointConstraint::D2 ( gp_Pnt P,
gp_Vec V1,
gp_Vec V2,
gp_Vec V3,
gp_Vec V4,
gp_Vec V5 
) const
Standard_Real GeomPlate_PointConstraint::G0Criterion ( ) const

Returns the G0 criterion. This is the greatest distance allowed between the constraint and the target surface.

Standard_Real GeomPlate_PointConstraint::G1Criterion ( ) const

Returns the G1 criterion. This is the greatest angle allowed between the constraint and the target surface. Raises ConstructionError if the point is not on the surface.

Standard_Real GeomPlate_PointConstraint::G2Criterion ( ) const

Returns the G2 criterion. This is the greatest difference in curvature allowed between the constraint and the target surface. Raises ConstructionError if the point is not on the surface.

Standard_Boolean GeomPlate_PointConstraint::HasPnt2dOnSurf ( ) const
GeomLProp_SLProps& GeomPlate_PointConstraint::LPropSurf ( )
Standard_Integer GeomPlate_PointConstraint::Order ( ) const

Returns the order of constraint: G0, G1, and G2, controlled respectively by G0Criterion G1Criterion and G2Criterion.

gp_Pnt2d GeomPlate_PointConstraint::Pnt2dOnSurf ( ) const
void GeomPlate_PointConstraint::SetG0Criterion ( const Standard_Real  TolDist)

Allows you to set the G0 criterion. This is the law defining the greatest distance allowed between the constraint and the target surface. If this criterion is not set, {TolDist, the distance tolerance from the constructor, is used.

void GeomPlate_PointConstraint::SetG1Criterion ( const Standard_Real  TolAng)

Allows you to set the G1 criterion. This is the law defining the greatest angle allowed between the constraint and the target surface. If this criterion is not set, TolAng, the angular tolerance from the constructor, is used. Raises ConstructionError if the point is not on the surface.

void GeomPlate_PointConstraint::SetG2Criterion ( const Standard_Real  TolCurv)

Allows you to set the G2 criterion. This is the law defining the greatest difference in curvature allowed between the constraint and the target surface. If this criterion is not set, TolCurv, the curvature tolerance from the constructor, is used. Raises ConstructionError if the point is not on the surface.

void GeomPlate_PointConstraint::SetOrder ( const Standard_Integer  Order)
void GeomPlate_PointConstraint::SetPnt2dOnSurf ( const gp_Pnt2d Pnt)

Field Documentation

Standard_Integer GeomPlate_PointConstraint::myOrder
protected

The documentation for this class was generated from the following file: