implement a modification for BRepTools Modifier algortihm. Converts Surface of Linear Exctrusion, Revolution and Offset surfaces into BSpline Surface according to flags. More...
#include <ShapeCustom_ConvertToBSpline.hxx>
Public Member Functions | |
| ShapeCustom_ConvertToBSpline () | |
| void | SetExtrusionMode (const Standard_Boolean extrMode) |
| Sets mode for convertion of Surfaces of Linear extrusion. More... | |
| void | SetRevolutionMode (const Standard_Boolean revolMode) |
| Sets mode for convertion of Surfaces of Revolution. More... | |
| void | SetOffsetMode (const Standard_Boolean offsetMode) |
| Sets mode for convertion of Offset surfaces. More... | |
| void | SetPlaneMode (const Standard_Boolean planeMode) |
| Sets mode for convertion of Plane surfaces. More... | |
| Standard_Boolean | NewSurface (const TopoDS_Face &F, Handle< Geom_Surface > &S, TopLoc_Location &L, Standard_Real &Tol, Standard_Boolean &RevWires, Standard_Boolean &RevFace) |
| Returns Standard_True if the face <F> has been modified. In this case, <S> is the new geometric support of the face, <L> the new location, <Tol> the new tolerance. Otherwise, returns Standard_False, and <S>, <L>, <Tol> are not significant. More... | |
| Standard_Boolean | NewCurve (const TopoDS_Edge &E, Handle< Geom_Curve > &C, TopLoc_Location &L, Standard_Real &Tol) |
Returns Standard_True if the edge <E> has been modified. In this case, is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. Otherwise, returns Standard_False, and More... | |
| Standard_Boolean | NewPoint (const TopoDS_Vertex &V, gp_Pnt &P, Standard_Real &Tol) |
| Returns Standard_True if the vertex <V> has been modified. In this case,. More... | |
| Standard_Boolean | NewCurve2d (const TopoDS_Edge &E, const TopoDS_Face &F, const TopoDS_Edge &NewE, const TopoDS_Face &NewF, Handle< Geom2d_Curve > &C, Standard_Real &Tol) |
Returns Standard_True if the edge <E> has a new curve on surface on the face <F>.In this case, is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. More... | |
| Standard_Boolean | NewParameter (const TopoDS_Vertex &V, const TopoDS_Edge &E, Standard_Real &P, Standard_Real &Tol) |
| Returns Standard_True if the Vertex <V> has a new parameter on the edge <E>. In this case,. More... | |
| GeomAbs_Shape | Continuity (const TopoDS_Edge &E, const TopoDS_Face &F1, const TopoDS_Face &F2, const TopoDS_Edge &NewE, const TopoDS_Face &NewF1, const TopoDS_Face &NewF2) |
| Returns the continuity of <NewE> between <NewF1> and <NewF2>. More... | |
 Public Member Functions inherited from ShapeCustom_Modification | |
| virtual void | SetMsgRegistrator (const Handle< ShapeExtend_BasicMsgRegistrator > &msgreg) |
| Sets message registrator. More... | |
| Handle< ShapeExtend_BasicMsgRegistrator > | MsgRegistrator () const |
| Returns message registrator. More... | |
| void | SendMsg (const TopoDS_Shape &shape, const Message_Msg &message, const Message_Gravity gravity=Message_Info) const |
| Sends a message to be attached to the shape. Calls corresponding message of message registrator. More... | |
| Public Member Functions inherited from BRepTools_Modification | |
| virtual Standard_Boolean | NewTriangulation (const TopoDS_Face &F, Handle< Poly_Triangulation > &T) |
| Returns true if the face has been modified according to changed triangulation. If the face has been modified: More... | |
| Public Member Functions inherited from MMgt_TShared | |
| virtual void | Delete () const |
| Memory deallocator for transient classes. More... | |
| Public Member Functions inherited from Standard_Transient | |
| Standard_Transient () | |
| Empty constructor. More... | |
| Standard_Transient (const Standard_Transient &) | |
| Copy constructor – does nothing. More... | |
| Standard_Transient & | operator= (const Standard_Transient &) |
| Assignment operator, needed to avoid copying reference counter. More... | |
| virtual | ~Standard_Transient () |
| Destructor must be virtual. More... | |
| virtual const Handle_Standard_Type & | DynamicType () const |
| Returns a type information object about this object. More... | |
| Standard_Boolean | IsInstance (const Handle_Standard_Type &theType) const |
| Returns a true value if this is an instance of Type. More... | |
| Standard_Boolean | IsInstance (const Standard_CString theTypeName) const |
| Returns a true value if this is an instance of TypeName. More... | |
| Standard_Boolean | IsKind (const Handle_Standard_Type &theType) const |
| Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| Standard_Boolean | IsKind (const Standard_CString theTypeName) const |
| Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
| virtual Handle_Standard_Transient | This () const |
| Returns a Handle which references this object. Must never be called to objects created in stack. More... | |
| Standard_Integer | GetRefCount () const |
| Get the reference counter of this object. More... | |
Detailed Description
implement a modification for BRepTools Modifier algortihm. Converts Surface of Linear Exctrusion, Revolution and Offset surfaces into BSpline Surface according to flags.
Constructor & Destructor Documentation
| ShapeCustom_ConvertToBSpline::ShapeCustom_ConvertToBSpline | ( | ) |
Member Function Documentation
|
virtual |
Returns the continuity of <NewE> between <NewF1> and <NewF2>.
<NewE> is the new edge created from <E>. <NewF1> (resp. <NewF2>) is the new face created from <F1> (resp. <F2>).
Implements BRepTools_Modification.
|
virtual |
Returns Standard_True if the edge <E> has been modified. In this case, is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance. Otherwise, returns Standard_False, and , <L>, <Tol> are not significant.
Implements BRepTools_Modification.
|
virtual |
Returns Standard_True if the edge <E> has a new curve on surface on the face <F>.In this case, is the new geometric support of the edge, <L> the new location, <Tol> the new tolerance.
Otherwise, returns Standard_False, and , <L>, <Tol> are not significant.
<NewE> is the new edge created from <E>. <NewF> is the new face created from <F>. They may be usefull.
Implements BRepTools_Modification.
|
virtual |
Returns Standard_True if the Vertex <V> has a new parameter on the edge <E>. In this case,.
is the parameter, <Tol> the new tolerance. Otherwise, returns Standard_False, and
, <Tol> are not significant.
Implements BRepTools_Modification.
|
virtual |
Returns Standard_True if the vertex <V> has been modified. In this case,.
is the new geometric support of the vertex, <Tol> the new tolerance. Otherwise, returns Standard_False, and
, <Tol> are not significant.
Implements BRepTools_Modification.
|
virtual |
Returns Standard_True if the face <F> has been modified. In this case, <S> is the new geometric support of the face, <L> the new location, <Tol> the new tolerance. Otherwise, returns Standard_False, and <S>, <L>, <Tol> are not significant.
Implements BRepTools_Modification.
| void ShapeCustom_ConvertToBSpline::SetExtrusionMode | ( | const Standard_Boolean | extrMode | ) |
Sets mode for convertion of Surfaces of Linear extrusion.
| void ShapeCustom_ConvertToBSpline::SetOffsetMode | ( | const Standard_Boolean | offsetMode | ) |
Sets mode for convertion of Offset surfaces.
| void ShapeCustom_ConvertToBSpline::SetPlaneMode | ( | const Standard_Boolean | planeMode | ) |
Sets mode for convertion of Plane surfaces.
| void ShapeCustom_ConvertToBSpline::SetRevolutionMode | ( | const Standard_Boolean | revolMode | ) |
Sets mode for convertion of Surfaces of Revolution.
The documentation for this class was generated from the following file:
