|
Open CASCADE Technology
7.1.0.beta
|
manages atomic file writing, under control of StepModel (for general organisation of file) and each class of Transient (for its own parameters) : prepares text to be written then writes it A stream cannot be used because Step limits line length at 72 In more, a specific object offers more appropriate functions More...
#include <StepData_StepWriter.hxx>
Public Member Functions | |
| StepData_StepWriter (const Handle< StepData_StepModel > &amodel) | |
| Creates an empty StepWriter from a StepModel. The StepModel provides the Number of Entities, as identifiers for File. More... | |
| Standard_Integer & | LabelMode () |
| ModeLabel controls how to display entity ids : 0 (D) gives entity number in the model 1 gives the already recorded label (else, its number) Warning : conflicts are not controlled. More... | |
| Standard_Integer & | TypeMode () |
| TypeMode controls the type form to use : 0 (D) for normal long form 1 for short form (if a type name has no short form, normal long form is then used) More... | |
| Interface_FloatWriter & | FloatWriter () |
| Returns the embedded FloatWriter, which controls sending Reals Use this method to access FloatWriter in order to consult or change its options (MainFormat, FormatForRange,ZeroSuppress), because it is returned as the address of its field. More... | |
| void | SetScope (const Standard_Integer numscope, const Standard_Integer numin) |
| Declares the Entity Number <numscope> to correspond to a Scope which contains the Entity Number <numin>. Several calls to the same <numscope> add Entities in this Scope, in this order. Error if <numin> is already declared in the Scope Warning : the declaration of the Scopes is assumed to be consistent, i.e. <numin> is not referenced from outside this Scope (not checked here) More... | |
| Standard_Boolean | IsInScope (const Standard_Integer num) const |
| Returns True if an Entity identified by its Number is in a Scope. More... | |
| void | SendModel (const Handle< StepData_Protocol > &protocol, const Standard_Boolean headeronly=Standard_False) |
| Sends the complete Model, included HEADER and DATA Sections Works with a WriterLib defined through a Protocol If <headeronly> is given True, only the HEADER Section is sent (used to Dump the Header of a StepModel) More... | |
| void | SendHeader () |
| Begins model header. More... | |
| void | SendData () |
| Begins data section; error if EndSec was not set. More... | |
| void | SendEntity (const Standard_Integer nument, const StepData_WriterLib &lib) |
| Send an Entity of the Data Section. If it corresponds to a Scope, also Sends the Scope informations and contained Items. More... | |
| void | EndSec () |
| sets end of section; to be done before passing to next one More... | |
| void | EndFile () |
| sets end of file; error is EndSec was not set More... | |
| void | NewLine (const Standard_Boolean evenempty) |
| flushes current line; if empty, flushes it (defines a new empty line) if evenempty is True; else, skips it More... | |
| void | JoinLast (const Standard_Boolean newline) |
| joins current line to last one, only if new length is 72 max if newline is True, a new current line begins; else, current line is set to the last line (once joined) itself an can be completed More... | |
| void | Indent (const Standard_Boolean onent) |
| asks that further indentations will begin at position of entity first opening bracket; else they begin at zero (def) for each sublist level, two more blancks are added at beginning (except for text continuation, which must begin at true zero) More... | |
| void | SendIdent (const Standard_Integer ident) |
| begins an entity with an ident plus '=' (at beginning of line) entity ident is its Number given by the containing Model Warning : <ident> must be, either Number or Label, according LabelMode More... | |
| void | SendScope () |
| sets a begin of Scope (ends this line) More... | |
| void | SendEndscope () |
| sets an end of Scope (on a separate line) More... | |
| void | Comment (const Standard_Boolean mode) |
| sets a comment mark : if mode is True, begins Comment zone, if mode is False, ends Comment zone (if one is begun) More... | |
| void | SendComment (const Handle< TCollection_HAsciiString > &text) |
| sends a comment. Error if we are not inside a comment zone More... | |
| void | SendComment (const Standard_CString text) |
| same as above but accepts a CString (ex.: "..." directly) More... | |
| void | StartEntity (const TCollection_AsciiString &atype) |
| sets entity's StepType, opens brakets, starts param no to 0 params are separated by comma Remark : for a Multiple Type Entity (see Express ANDOR clause) StartComplex must be called before sending componants, then each "Componant" must be send separately (one call to StartEntity for each one) : the Type which preceeds is then automaticaly closed. Once all the componants have been sent, EndComplex must be called, then and only then EndEntity More... | |
| void | StartComplex () |
| sends the start of a complex entity, which is a simple open bracket (without increasing braket level) It must be called JUST AFTER SendEntity and BEFORE sending componants, each one begins by StartEntity More... | |
| void | EndComplex () |
| sends the end of a complex entity : a simple closed bracket It must be called AFTER sending all the componants and BEFORE the final call to EndEntity More... | |
| void | SendField (const StepData_Field &fild, const Handle< StepData_PDescr > &descr) |
| Sends the content of a field, controlled by its descriptor If the descriptor is not defined, follows the description detained by the field itself. More... | |
| void | SendSelect (const Handle< StepData_SelectMember > &sm, const Handle< StepData_PDescr > &descr) |
| Sends a SelectMember, which cab be named or not. More... | |
| void | SendList (const StepData_FieldList &list, const Handle< StepData_ESDescr > &descr) |
| Send the content of an entity as being a FieldList controlled by its descriptor. This includes start and end brackets but not the entity type. More... | |
| void | OpenSub () |
| open a sublist by a '(' More... | |
| void | OpenTypedSub (const Standard_CString subtype) |
| open a sublist with its type then a '(' More... | |
| void | CloseSub () |
| closes a sublist by a ')' More... | |
| void | AddParam () |
| prepares adding a parameter (that is, adds ',' except for first one); normally for internal use; can be used to send a totally empty parameter (with no litteral value) More... | |
| void | Send (const Standard_Integer val) |
| sends an integer parameter More... | |
| void | Send (const Standard_Real val) |
| sends a real parameter (wroks with FloatWriter) More... | |
| void | Send (const TCollection_AsciiString &val) |
| sends a text given as string (it will be set between '...') More... | |
| void | Send (const Handle< Standard_Transient > &val) |
| sends a reference to an entity (its identifier with '#') REMARK 1 : a Null <val> is interpreted as "Undefined" REMARK 2 : for an HAsciiString which is not recorded in the Model, it is send as its String Content, between quotes More... | |
| void | SendBoolean (const Standard_Boolean val) |
| sends a Boolean as .T. for True or .F. for False (it is an useful case of Enum, which is built-in) More... | |
| void | SendLogical (const StepData_Logical val) |
| sends a Logical as .T. or .F. or .U. according its Value (it is a standard case of Enum for Step, and is built-in) More... | |
| void | SendString (const TCollection_AsciiString &val) |
| sends a string exactly as it is given More... | |
| void | SendString (const Standard_CString val) |
| sends a string exactly as it is given More... | |
| void | SendEnum (const TCollection_AsciiString &val) |
| sends an enum given by String (litteral expression) adds '.' around it if not done Remark : val can be computed by class EnumTool from StepData: StepWriter.SendEnum (myenum.Text(enumval)); More... | |
| void | SendEnum (const Standard_CString val) |
| sends an enum given by String (litteral expression) adds '.' around it if not done More... | |
| void | SendArrReal (const Handle< TColStd_HArray1OfReal > &anArr) |
| sends an array of real More... | |
| void | SendUndef () |
| sends an undefined (optionnal absent) parameter (by '$') More... | |
| void | SendDerived () |
| sends a "Derived" parameter (by '*'). A Derived Parameter has been inherited from a Super-Type then redefined as being computed by a function. Hence its value in file is senseless. More... | |
| void | EndEntity () |
| sends end of entity (closing bracket plus ';') Error if count of opened-closed brackets is not null More... | |
| Interface_CheckIterator | CheckList () const |
| Returns the check-list, which has received possible checks : for unknown entities, badly loaded ones, null or unknown references. More... | |
| Standard_Integer | NbLines () const |
| Returns count of Lines. More... | |
| Handle< TCollection_HAsciiString > | Line (const Standard_Integer num) const |
| Returns a Line given its rank in the File. More... | |
| Standard_Boolean | Print (Standard_OStream &S) |
| writes result on an output defined as an OStream then clears it More... | |
manages atomic file writing, under control of StepModel (for general organisation of file) and each class of Transient (for its own parameters) : prepares text to be written then writes it A stream cannot be used because Step limits line length at 72 In more, a specific object offers more appropriate functions
| StepData_StepWriter::StepData_StepWriter | ( | const Handle< StepData_StepModel > & | amodel | ) |
Creates an empty StepWriter from a StepModel. The StepModel provides the Number of Entities, as identifiers for File.
| void StepData_StepWriter::AddParam | ( | ) |
prepares adding a parameter (that is, adds ',' except for first one); normally for internal use; can be used to send a totally empty parameter (with no litteral value)
| Interface_CheckIterator StepData_StepWriter::CheckList | ( | ) | const |
Returns the check-list, which has received possible checks : for unknown entities, badly loaded ones, null or unknown references.
| void StepData_StepWriter::CloseSub | ( | ) |
closes a sublist by a ')'
| void StepData_StepWriter::Comment | ( | const Standard_Boolean | mode | ) |
sets a comment mark : if mode is True, begins Comment zone, if mode is False, ends Comment zone (if one is begun)
| void StepData_StepWriter::EndComplex | ( | ) |
sends the end of a complex entity : a simple closed bracket It must be called AFTER sending all the componants and BEFORE the final call to EndEntity
| void StepData_StepWriter::EndEntity | ( | ) |
sends end of entity (closing bracket plus ';') Error if count of opened-closed brackets is not null
| void StepData_StepWriter::EndFile | ( | ) |
sets end of file; error is EndSec was not set
| void StepData_StepWriter::EndSec | ( | ) |
sets end of section; to be done before passing to next one
| Interface_FloatWriter& StepData_StepWriter::FloatWriter | ( | ) |
Returns the embedded FloatWriter, which controls sending Reals Use this method to access FloatWriter in order to consult or change its options (MainFormat, FormatForRange,ZeroSuppress), because it is returned as the address of its field.
| void StepData_StepWriter::Indent | ( | const Standard_Boolean | onent | ) |
asks that further indentations will begin at position of entity first opening bracket; else they begin at zero (def) for each sublist level, two more blancks are added at beginning (except for text continuation, which must begin at true zero)
| Standard_Boolean StepData_StepWriter::IsInScope | ( | const Standard_Integer | num | ) | const |
Returns True if an Entity identified by its Number is in a Scope.
| void StepData_StepWriter::JoinLast | ( | const Standard_Boolean | newline | ) |
joins current line to last one, only if new length is 72 max if newline is True, a new current line begins; else, current line is set to the last line (once joined) itself an can be completed
| Standard_Integer& StepData_StepWriter::LabelMode | ( | ) |
ModeLabel controls how to display entity ids : 0 (D) gives entity number in the model 1 gives the already recorded label (else, its number) Warning : conflicts are not controlled.
| Handle< TCollection_HAsciiString > StepData_StepWriter::Line | ( | const Standard_Integer | num | ) | const |
Returns a Line given its rank in the File.
| Standard_Integer StepData_StepWriter::NbLines | ( | ) | const |
Returns count of Lines.
| void StepData_StepWriter::NewLine | ( | const Standard_Boolean | evenempty | ) |
flushes current line; if empty, flushes it (defines a new empty line) if evenempty is True; else, skips it
| void StepData_StepWriter::OpenSub | ( | ) |
open a sublist by a '('
| void StepData_StepWriter::OpenTypedSub | ( | const Standard_CString | subtype | ) |
open a sublist with its type then a '('
| Standard_Boolean StepData_StepWriter::Print | ( | Standard_OStream & | S | ) |
writes result on an output defined as an OStream then clears it
| void StepData_StepWriter::Send | ( | const Standard_Integer | val | ) |
sends an integer parameter
| void StepData_StepWriter::Send | ( | const Standard_Real | val | ) |
sends a real parameter (wroks with FloatWriter)
| void StepData_StepWriter::Send | ( | const TCollection_AsciiString & | val | ) |
sends a text given as string (it will be set between '...')
| void StepData_StepWriter::Send | ( | const Handle< Standard_Transient > & | val | ) |
sends a reference to an entity (its identifier with '#') REMARK 1 : a Null <val> is interpreted as "Undefined" REMARK 2 : for an HAsciiString which is not recorded in the Model, it is send as its String Content, between quotes
| void StepData_StepWriter::SendArrReal | ( | const Handle< TColStd_HArray1OfReal > & | anArr | ) |
sends an array of real
| void StepData_StepWriter::SendBoolean | ( | const Standard_Boolean | val | ) |
sends a Boolean as .T. for True or .F. for False (it is an useful case of Enum, which is built-in)
| void StepData_StepWriter::SendComment | ( | const Handle< TCollection_HAsciiString > & | text | ) |
sends a comment. Error if we are not inside a comment zone
| void StepData_StepWriter::SendComment | ( | const Standard_CString | text | ) |
same as above but accepts a CString (ex.: "..." directly)
| void StepData_StepWriter::SendData | ( | ) |
Begins data section; error if EndSec was not set.
| void StepData_StepWriter::SendDerived | ( | ) |
sends a "Derived" parameter (by '*'). A Derived Parameter has been inherited from a Super-Type then redefined as being computed by a function. Hence its value in file is senseless.
| void StepData_StepWriter::SendEndscope | ( | ) |
sets an end of Scope (on a separate line)
| void StepData_StepWriter::SendEntity | ( | const Standard_Integer | nument, |
| const StepData_WriterLib & | lib | ||
| ) |
Send an Entity of the Data Section. If it corresponds to a Scope, also Sends the Scope informations and contained Items.
| void StepData_StepWriter::SendEnum | ( | const TCollection_AsciiString & | val | ) |
sends an enum given by String (litteral expression) adds '.' around it if not done Remark : val can be computed by class EnumTool from StepData: StepWriter.SendEnum (myenum.Text(enumval));
| void StepData_StepWriter::SendEnum | ( | const Standard_CString | val | ) |
sends an enum given by String (litteral expression) adds '.' around it if not done
| void StepData_StepWriter::SendField | ( | const StepData_Field & | fild, |
| const Handle< StepData_PDescr > & | descr | ||
| ) |
Sends the content of a field, controlled by its descriptor If the descriptor is not defined, follows the description detained by the field itself.
| void StepData_StepWriter::SendHeader | ( | ) |
Begins model header.
| void StepData_StepWriter::SendIdent | ( | const Standard_Integer | ident | ) |
begins an entity with an ident plus '=' (at beginning of line) entity ident is its Number given by the containing Model Warning : <ident> must be, either Number or Label, according LabelMode
| void StepData_StepWriter::SendList | ( | const StepData_FieldList & | list, |
| const Handle< StepData_ESDescr > & | descr | ||
| ) |
Send the content of an entity as being a FieldList controlled by its descriptor. This includes start and end brackets but not the entity type.
| void StepData_StepWriter::SendLogical | ( | const StepData_Logical | val | ) |
sends a Logical as .T. or .F. or .U. according its Value (it is a standard case of Enum for Step, and is built-in)
| void StepData_StepWriter::SendModel | ( | const Handle< StepData_Protocol > & | protocol, |
| const Standard_Boolean | headeronly = Standard_False |
||
| ) |
Sends the complete Model, included HEADER and DATA Sections Works with a WriterLib defined through a Protocol If <headeronly> is given True, only the HEADER Section is sent (used to Dump the Header of a StepModel)
| void StepData_StepWriter::SendScope | ( | ) |
sets a begin of Scope (ends this line)
| void StepData_StepWriter::SendSelect | ( | const Handle< StepData_SelectMember > & | sm, |
| const Handle< StepData_PDescr > & | descr | ||
| ) |
Sends a SelectMember, which cab be named or not.
| void StepData_StepWriter::SendString | ( | const TCollection_AsciiString & | val | ) |
sends a string exactly as it is given
| void StepData_StepWriter::SendString | ( | const Standard_CString | val | ) |
sends a string exactly as it is given
| void StepData_StepWriter::SendUndef | ( | ) |
sends an undefined (optionnal absent) parameter (by '$')
| void StepData_StepWriter::SetScope | ( | const Standard_Integer | numscope, |
| const Standard_Integer | numin | ||
| ) |
Declares the Entity Number <numscope> to correspond to a Scope which contains the Entity Number <numin>. Several calls to the same <numscope> add Entities in this Scope, in this order. Error if <numin> is already declared in the Scope Warning : the declaration of the Scopes is assumed to be consistent, i.e. <numin> is not referenced from outside this Scope (not checked here)
| void StepData_StepWriter::StartComplex | ( | ) |
sends the start of a complex entity, which is a simple open bracket (without increasing braket level) It must be called JUST AFTER SendEntity and BEFORE sending componants, each one begins by StartEntity
| void StepData_StepWriter::StartEntity | ( | const TCollection_AsciiString & | atype | ) |
sets entity's StepType, opens brakets, starts param no to 0 params are separated by comma Remark : for a Multiple Type Entity (see Express ANDOR clause) StartComplex must be called before sending componants, then each "Componant" must be send separately (one call to StartEntity for each one) : the Type which preceeds is then automaticaly closed. Once all the componants have been sent, EndComplex must be called, then and only then EndEntity
| Standard_Integer& StepData_StepWriter::TypeMode | ( | ) |
TypeMode controls the type form to use : 0 (D) for normal long form 1 for short form (if a type name has no short form, normal long form is then used)
1.8.10