Builds all the faces limited with a set of non jointing and planars wires. if <ControlOrientation> is false The Wires must have correct orientations. Sinon orientation des wires de telle sorte que les faces ne soient pas infinies et qu'elles soient disjointes. More...

#include <BRepAlgo_FaceRestrictor.hxx>

Public Member Functions
	BRepAlgo_FaceRestrictor ()

void	Init (const TopoDS_Face &F, const Standard_Boolean Proj=Standard_False, const Standard_Boolean ControlOrientation=Standard_False)
	the surface of <F> will be the surface of each new faces built. <Proj> is used to update pcurves on edges if necessary. See Add().

void	Add (TopoDS_Wire &W)
	Add the wire <W> to the set of wires.

void	Clear ()
	Removes all the Wires.

void	Perform ()
	Evaluate all the faces limited by the set of Wires.

Standard_Boolean	IsDone () const

Standard_Boolean	More () const

void	Next ()

TopoDS_Face	Current () const

Detailed Description

Builds all the faces limited with a set of non jointing and planars wires. if <ControlOrientation> is false The Wires must have correct orientations. Sinon orientation des wires de telle sorte que les faces ne soient pas infinies et qu'elles soient disjointes.

Constructor & Destructor Documentation

◆ BRepAlgo_FaceRestrictor()

BRepAlgo_FaceRestrictor::BRepAlgo_FaceRestrictor ( )

Member Function Documentation

◆ Add()

void BRepAlgo_FaceRestrictor::Add ( TopoDS_Wire & W )

Add the wire <W> to the set of wires.

Warning: The Wires must be closed.

The edges of <W> can be modified if they have not pcurves on the surface ~~of <F>. In this case if <Proj> is false the first pcurve of the edge is positionned on ~~. if <Proj> is True ,the Pcurve On ~~is the projection of the curve 3d on <F>.~~~~~~

◆ Clear()

void BRepAlgo_FaceRestrictor::Clear ( )

Removes all the Wires.

◆ Current()

TopoDS_Face BRepAlgo_FaceRestrictor::Current ( ) const

◆ Init()

void BRepAlgo_FaceRestrictor::Init	(	const TopoDS_Face &	F,
		const Standard_Boolean	Proj = `Standard_False`,
		const Standard_Boolean	ControlOrientation = `Standard_False`
	)

the surface of <F> will be the surface of each new faces built. <Proj> is used to update pcurves on edges if necessary. See Add().

◆ IsDone()

Standard_Boolean BRepAlgo_FaceRestrictor::IsDone ( ) const

◆ More()

Standard_Boolean BRepAlgo_FaceRestrictor::More ( ) const

◆ Next()

void BRepAlgo_FaceRestrictor::Next ( )

◆ Perform()

void BRepAlgo_FaceRestrictor::Perform ( )

Evaluate all the faces limited by the set of Wires.

The documentation for this class was generated from the following file:

BRepAlgo_FaceRestrictor.hxx

Public Member Functions