#include <GeomInt_TheMultiLineToolOfWLApprox.hxx>

Static Public Member Functions
static Standard_Integer	FirstPoint (const GeomInt_TheMultiLineOfWLApprox &ML)
	Returns the number of multipoints of the TheMultiLine.

static Standard_Integer	LastPoint (const GeomInt_TheMultiLineOfWLApprox &ML)
	Returns the number of multipoints of the TheMultiLine.

static Standard_Integer	NbP2d (const GeomInt_TheMultiLineOfWLApprox &ML)
	Returns the number of 2d points of a TheMultiLine.

static Standard_Integer	NbP3d (const GeomInt_TheMultiLineOfWLApprox &ML)
	Returns the number of 3d points of a TheMultiLine.

static void	Value (const GeomInt_TheMultiLineOfWLApprox &ML, const Standard_Integer MPointIndex, TColgp_Array1OfPnt &tabPt)
	returns the 3d points of the multipoint <MPointIndex> when only 3d points exist.

static void	Value (const GeomInt_TheMultiLineOfWLApprox &ML, const Standard_Integer MPointIndex, TColgp_Array1OfPnt2d &tabPt2d)
	returns the 2d points of the multipoint <MPointIndex> when only 2d points exist.

static void	Value (const GeomInt_TheMultiLineOfWLApprox &ML, const Standard_Integer MPointIndex, TColgp_Array1OfPnt &tabPt, TColgp_Array1OfPnt2d &tabPt2d)
	returns the 3d and 2d points of the multipoint <MPointIndex>.

static Standard_Boolean	Tangency (const GeomInt_TheMultiLineOfWLApprox &ML, const Standard_Integer MPointIndex, TColgp_Array1OfVec &tabV)
	returns the 3d points of the multipoint <MPointIndex> when only 3d points exist.

static Standard_Boolean	Tangency (const GeomInt_TheMultiLineOfWLApprox &ML, const Standard_Integer MPointIndex, TColgp_Array1OfVec2d &tabV2d)
	returns the 2d tangency points of the multipoint <MPointIndex> only when 2d points exist.

static Standard_Boolean	Tangency (const GeomInt_TheMultiLineOfWLApprox &ML, const Standard_Integer MPointIndex, TColgp_Array1OfVec &tabV, TColgp_Array1OfVec2d &tabV2d)
	returns the 3d and 2d points of the multipoint <MPointIndex>.

static Standard_Boolean	Curvature (const GeomInt_TheMultiLineOfWLApprox &ML, const Standard_Integer MPointIndex, TColgp_Array1OfVec &tabV)
	returns the 3d curvature of the multipoint <MPointIndex> when only 3d points exist.

static Standard_Boolean	Curvature (const GeomInt_TheMultiLineOfWLApprox &ML, const Standard_Integer MPointIndex, TColgp_Array1OfVec2d &tabV2d)
	returns the 2d curvature points of the multipoint <MPointIndex> only when 2d points exist.

static Standard_Boolean	Curvature (const GeomInt_TheMultiLineOfWLApprox &ML, const Standard_Integer MPointIndex, TColgp_Array1OfVec &tabV, TColgp_Array1OfVec2d &tabV2d)
	returns the 3d and 2d curvature of the multipoint <MPointIndex>.

static GeomInt_TheMultiLineOfWLApprox	MakeMLBetween (const GeomInt_TheMultiLineOfWLApprox &ML, const Standard_Integer I1, const Standard_Integer I2, const Standard_Integer NbPMin)
	Is called if WhatStatus returned "PointsAdded".

static Standard_Boolean	MakeMLOneMorePoint (const GeomInt_TheMultiLineOfWLApprox &ML, const Standard_Integer I1, const Standard_Integer I2, const Standard_Integer indbad, GeomInt_TheMultiLineOfWLApprox &OtherLine)
	Is called when the Bezier curve contains a loop.

static Approx_Status	WhatStatus (const GeomInt_TheMultiLineOfWLApprox &ML, const Standard_Integer I1, const Standard_Integer I2)

static void	Dump (const GeomInt_TheMultiLineOfWLApprox &ML)
	Dump of the current multi-line.

Member Function Documentation

◆ Curvature() [1/3]

static Standard_Boolean GeomInt_TheMultiLineToolOfWLApprox::Curvature	(	const GeomInt_TheMultiLineOfWLApprox &	ML,
		const Standard_Integer	MPointIndex,
		TColgp_Array1OfVec &	tabV
	)

static

returns the 3d curvature of the multipoint <MPointIndex> when only 3d points exist.

◆ Curvature() [2/3]

static Standard_Boolean GeomInt_TheMultiLineToolOfWLApprox::Curvature	(	const GeomInt_TheMultiLineOfWLApprox &	ML,
		const Standard_Integer	MPointIndex,
		TColgp_Array1OfVec &	tabV,
		TColgp_Array1OfVec2d &	tabV2d
	)

static

returns the 3d and 2d curvature of the multipoint <MPointIndex>.

◆ Curvature() [3/3]

static Standard_Boolean GeomInt_TheMultiLineToolOfWLApprox::Curvature	(	const GeomInt_TheMultiLineOfWLApprox &	ML,
		const Standard_Integer	MPointIndex,
		TColgp_Array1OfVec2d &	tabV2d
	)

static

returns the 2d curvature points of the multipoint <MPointIndex> only when 2d points exist.

◆ Dump()

static void GeomInt_TheMultiLineToolOfWLApprox::Dump ( const GeomInt_TheMultiLineOfWLApprox & ML )

static

Dump of the current multi-line.

◆ FirstPoint()

static Standard_Integer GeomInt_TheMultiLineToolOfWLApprox::FirstPoint ( const GeomInt_TheMultiLineOfWLApprox & ML )

static

Returns the number of multipoints of the TheMultiLine.

◆ LastPoint()

static Standard_Integer GeomInt_TheMultiLineToolOfWLApprox::LastPoint ( const GeomInt_TheMultiLineOfWLApprox & ML )

static

Returns the number of multipoints of the TheMultiLine.

◆ MakeMLBetween()

static GeomInt_TheMultiLineOfWLApprox GeomInt_TheMultiLineToolOfWLApprox::MakeMLBetween	(	const GeomInt_TheMultiLineOfWLApprox &	ML,
		const Standard_Integer	I1,
		const Standard_Integer	I2,
		const Standard_Integer	NbPMin
	)

static

Is called if WhatStatus returned "PointsAdded".

◆ MakeMLOneMorePoint()

static Standard_Boolean GeomInt_TheMultiLineToolOfWLApprox::MakeMLOneMorePoint	(	const GeomInt_TheMultiLineOfWLApprox &	ML,
		const Standard_Integer	I1,
		const Standard_Integer	I2,
		const Standard_Integer	indbad,
		GeomInt_TheMultiLineOfWLApprox &	OtherLine
	)

static

Is called when the Bezier curve contains a loop.

◆ NbP2d()

static Standard_Integer GeomInt_TheMultiLineToolOfWLApprox::NbP2d ( const GeomInt_TheMultiLineOfWLApprox & ML )

static

Returns the number of 2d points of a TheMultiLine.

◆ NbP3d()

static Standard_Integer GeomInt_TheMultiLineToolOfWLApprox::NbP3d ( const GeomInt_TheMultiLineOfWLApprox & ML )

static

Returns the number of 3d points of a TheMultiLine.

◆ Tangency() [1/3]

static Standard_Boolean GeomInt_TheMultiLineToolOfWLApprox::Tangency	(	const GeomInt_TheMultiLineOfWLApprox &	ML,
		const Standard_Integer	MPointIndex,
		TColgp_Array1OfVec &	tabV
	)

static

returns the 3d points of the multipoint <MPointIndex> when only 3d points exist.

◆ Tangency() [2/3]

static Standard_Boolean GeomInt_TheMultiLineToolOfWLApprox::Tangency	(	const GeomInt_TheMultiLineOfWLApprox &	ML,
		const Standard_Integer	MPointIndex,
		TColgp_Array1OfVec &	tabV,
		TColgp_Array1OfVec2d &	tabV2d
	)

static

returns the 3d and 2d points of the multipoint <MPointIndex>.

◆ Tangency() [3/3]

static Standard_Boolean GeomInt_TheMultiLineToolOfWLApprox::Tangency	(	const GeomInt_TheMultiLineOfWLApprox &	ML,
		const Standard_Integer	MPointIndex,
		TColgp_Array1OfVec2d &	tabV2d
	)

static

returns the 2d tangency points of the multipoint <MPointIndex> only when 2d points exist.

◆ Value() [1/3]

static void GeomInt_TheMultiLineToolOfWLApprox::Value	(	const GeomInt_TheMultiLineOfWLApprox &	ML,
		const Standard_Integer	MPointIndex,
		TColgp_Array1OfPnt &	tabPt
	)

static

returns the 3d points of the multipoint <MPointIndex> when only 3d points exist.

◆ Value() [2/3]

static void GeomInt_TheMultiLineToolOfWLApprox::Value	(	const GeomInt_TheMultiLineOfWLApprox &	ML,
		const Standard_Integer	MPointIndex,
		TColgp_Array1OfPnt &	tabPt,
		TColgp_Array1OfPnt2d &	tabPt2d
	)

static

returns the 3d and 2d points of the multipoint <MPointIndex>.

◆ Value() [3/3]

static void GeomInt_TheMultiLineToolOfWLApprox::Value	(	const GeomInt_TheMultiLineOfWLApprox &	ML,
		const Standard_Integer	MPointIndex,
		TColgp_Array1OfPnt2d &	tabPt2d
	)

static

returns the 2d points of the multipoint <MPointIndex> when only 2d points exist.

◆ WhatStatus()

static Approx_Status GeomInt_TheMultiLineToolOfWLApprox::WhatStatus	(	const GeomInt_TheMultiLineOfWLApprox &	ML,
		const Standard_Integer	I1,
		const Standard_Integer	I2
	)

static

The documentation for this class was generated from the following file:

GeomInt_TheMultiLineToolOfWLApprox.hxx

Static Public Member Functions

Member Function Documentation

◆ Curvature() [1/3]

◆ Curvature() [2/3]

◆ Curvature() [3/3]

◆ Dump()

◆ FirstPoint()

◆ LastPoint()

◆ MakeMLBetween()

◆ MakeMLOneMorePoint()

◆ NbP2d()

◆ NbP3d()

◆ Tangency() [1/3]

◆ Tangency() [2/3]

◆ Tangency() [3/3]

◆ Value() [1/3]

◆ Value() [2/3]

◆ Value() [3/3]

◆ WhatStatus()