|
| | XCAFPrs_AISObject (const TDF_Label &theLabel) |
| | Creates an object to visualise the shape label.
|
| |
| const TDF_Label & | GetLabel () const |
| | Returns the label which was visualised by this presentation.
|
| |
| void | SetLabel (const TDF_Label &theLabel) |
| | Assign the label to this presentation (but does not mark it outdated with SetToUpdate()).
|
| |
| virtual void | DispatchStyles (const bool theToSyncStyles=false) |
| | Fetch the Shape from associated Label and fill the map of sub-shapes styles. By default, this method is called implicitly within first Compute(). Application might call this method explicitly to manipulate styles afterwards.
|
| |
| void | SetMaterial (const Graphic3d_MaterialAspect &theMaterial) override |
| | Sets the material aspect. This method assigns the new default material without overriding XDE styles. Re-computation of existing presentation is not required after calling this method.
|
| |
| | AIS_ColoredShape (const TopoDS_Shape &theShape) |
| | Default constructor.
|
| |
| | AIS_ColoredShape (const occ::handle< AIS_Shape > &theShape) |
| | Copy constructor.
|
| |
| virtual occ::handle< AIS_ColoredDrawer > | CustomAspects (const TopoDS_Shape &theShape) |
| | Reset the map of custom sub-shape aspects.
|
| |
| virtual void | ClearCustomAspects () |
| | Reset the map of custom sub-shape aspects.
|
| |
| void | UnsetCustomAspects (const TopoDS_Shape &theShape, const bool theToUnregister=false) |
| | Reset custom properties of specified sub-shape.
|
| |
| void | SetCustomColor (const TopoDS_Shape &theShape, const Quantity_Color &theColor) |
| | Customize color of specified sub-shape.
|
| |
| void | SetCustomTransparency (const TopoDS_Shape &theShape, double theTransparency) |
| | Customize transparency of specified sub-shape.
|
| |
| void | SetCustomWidth (const TopoDS_Shape &theShape, const double theLineWidth) |
| | Customize line width of specified sub-shape.
|
| |
| const NCollection_DataMap< TopoDS_Shape, occ::handle< AIS_ColoredDrawer >, TopTools_ShapeMapHasher > & | CustomAspectsMap () const |
| | Return the map of custom aspects.
|
| |
| NCollection_DataMap< TopoDS_Shape, occ::handle< AIS_ColoredDrawer >, TopTools_ShapeMapHasher > & | ChangeCustomAspectsMap () |
| | Return the map of custom aspects.
|
| |
| void | SetColor (const Quantity_Color &theColor) override |
| | Setup line width of entire shape.
|
| |
| void | SetWidth (const double theLineWidth) override |
| | Setup line width of entire shape.
|
| |
| void | SetTransparency (const double theValue) override |
| | Sets transparency value.
|
| |
| void | UnsetTransparency () override |
| | Removes the setting for transparency in the reconstructed compound shape.
|
| |
| void | UnsetWidth () override |
| | Setup line width of entire shape.
|
| |
| | AIS_Shape (const TopoDS_Shape &shap) |
| | Initializes construction of the shape shap from wires, edges and vertices.
|
| |
| int | Signature () const override |
| | Returns index 0. This value refers to SHAPE from TopAbs_ShapeEnum.
|
| |
| AIS_KindOfInteractive | Type () const override |
| | Returns Object as the type of Interactive Object.
|
| |
| bool | AcceptShapeDecomposition () const override |
| | Returns true if the Interactive Object accepts shape decomposition.
|
| |
| bool | AcceptDisplayMode (const int theMode) const override |
| | Return true if specified display mode is supported.
|
| |
| const TopoDS_Shape & | Shape () const |
| | Returns this shape object.
|
| |
| void | SetShape (const TopoDS_Shape &theShape) |
| | Constructs an instance of the shape object theShape.
|
| |
| void | Set (const TopoDS_Shape &theShape) |
| | Alias for SetShape().
|
| |
| bool | SetOwnDeviationCoefficient () |
| | Sets a local value for deviation coefficient for this specific shape.
|
| |
| bool | SetOwnDeviationAngle () |
| | Sets a local value for deviation angle for this specific shape.
|
| |
| void | SetOwnDeviationCoefficient (const double aCoefficient) |
| | Sets a local value for deviation coefficient for this specific shape.
|
| |
| void | SetAngleAndDeviation (const double anAngle) |
| | this compute a new angle and Deviation from the value anAngle and set the values stored in myDrawer with these that become local to the shape
|
| |
| double | UserAngle () const |
| | gives back the angle initial value put by the User.
|
| |
| void | SetOwnDeviationAngle (const double anAngle) |
| | sets myOwnDeviationAngle field in Prs3d_Drawer & recomputes presentation
|
| |
| bool | OwnDeviationCoefficient (double &aCoefficient, double &aPreviousCoefficient) const |
| | Returns true and the values of the deviation coefficient aCoefficient and the previous deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned.
|
| |
| bool | OwnDeviationAngle (double &anAngle, double &aPreviousAngle) const |
| | Returns true and the values of the deviation angle anAngle and the previous deviation angle aPreviousAngle. If these values are not already set, false is returned.
|
| |
| void | SetTypeOfHLR (const Prs3d_TypeOfHLR theTypeOfHLR) |
| | Sets the type of HLR algorithm used by the shape.
|
| |
| Prs3d_TypeOfHLR | TypeOfHLR () const |
| | Gets the type of HLR algorithm.
|
| |
| void | SetColor (const Quantity_Color &theColor) override |
| | Sets the color aColor in the reconstructed compound shape. Acts via the Drawer methods below on the appearance of:
|
| |
| void | UnsetColor () override |
| | Removes settings for color in the reconstructed compound shape.
|
| |
| void | SetWidth (const double aValue) override |
| | Sets the value aValue for line width in the reconstructed compound shape. Changes line aspects for lines presentation.
|
| |
| void | UnsetWidth () override |
| | Removes the setting for line width in the reconstructed compound shape.
|
| |
| void | UnsetMaterial () override |
| | Removes settings for material in the reconstructed compound shape.
|
| |
| void | SetTransparency (const double aValue=0.6) override |
| | Sets the value aValue for transparency in the reconstructed compound shape.
|
| |
| void | UnsetTransparency () override |
| | Removes the setting for transparency in the reconstructed compound shape.
|
| |
| virtual const Bnd_Box & | BoundingBox () |
| | Constructs a bounding box with which to reconstruct compound topological shapes for presentation.
|
| |
| void | Color (Quantity_Color &aColor) const override |
| | Returns the Color attributes of the shape accordingly to the current facing model;.
|
| |
| Graphic3d_NameOfMaterial | Material () const override |
| | Returns the NameOfMaterial attributes of the shape accordingly to the current facing model;.
|
| |
| double | Transparency () const override |
| | Returns the transparency attributes of the shape accordingly to the current facing model;.
|
| |
| const gp_Pnt2d & | TextureRepeatUV () const |
| | shape to display
|
| |
| void | SetTextureRepeatUV (const gp_Pnt2d &theRepeatUV) |
| | Sets the number of occurrences of the texture on each face. The texture itself is parameterized in (0,1) by (0,1). Each face of the shape to be textured is parameterized in UV space (Umin,Umax) by (Vmin,Vmax).
|
| |
| const gp_Pnt2d & | TextureOriginUV () const |
| | Return texture origin UV position; (0, 0) by default.
|
| |
| void | SetTextureOriginUV (const gp_Pnt2d &theOriginUV) |
| | Use this method to change the origin of the texture. The texel (0,0) will be mapped to the surface (myUVOrigin.X(), myUVOrigin.Y()).
|
| |
| const gp_Pnt2d & | TextureScaleUV () const |
| | Return scale factor for UV coordinates; (1, 1) by default.
|
| |
| void | SetTextureScaleUV (const gp_Pnt2d &theScaleUV) |
| | Use this method to scale the texture (percent of the face). You can specify a scale factor for both U and V. Example: if you set ScaleU and ScaleV to 0.5 and you enable texture repeat, the texture will appear twice on the face in each direction.
|
| |
| void | DumpJson (Standard_OStream &theOStream, int theDepth=-1) const override |
| | Dumps the content of me into the stream.
|
| |
| void | Redisplay (const bool AllModes=false) |
| | Updates the active presentation; if <AllModes> = true all the presentations inside are recomputed. IMPORTANT: It is preferable to call Redisplay method of corresponding AIS_InteractiveContext instance for cases when it is accessible. This method just redirects call to myCTXPtr, so this class field must be up to date for proper result.
|
| |
| bool | HasInteractiveContext () const |
| | Indicates whether the Interactive Object has a pointer to an interactive context.
|
| |
| AIS_InteractiveContext * | InteractiveContext () const |
| | Returns the context pointer to the interactive context.
|
| |
| virtual void | SetContext (const occ::handle< AIS_InteractiveContext > &aCtx) |
| | Sets the interactive context aCtx and provides a link to the default drawing tool or "Drawer" if there is none.
|
| |
| bool | HasOwner () const |
| | Returns true if the object has an owner attributed to it. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient.
|
| |
| const occ::handle< Standard_Transient > & | GetOwner () const |
| | Returns the owner of the Interactive Object. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. There are two types of owners:
|
| |
| void | SetOwner (const occ::handle< Standard_Transient > &theApplicativeEntity) |
| | Allows you to attribute the owner theApplicativeEntity to an Interactive Object. This can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of. The owner takes the form of a transient.
|
| |
| void | ClearOwner () |
| | Each Interactive Object has methods which allow us to attribute an Owner to it in the form of a Transient. This method removes the owner from the graphic entity.
|
| |
| virtual bool | ProcessDragging (const occ::handle< AIS_InteractiveContext > &theCtx, const occ::handle< V3d_View > &theView, const occ::handle< SelectMgr_EntityOwner > &theOwner, const NCollection_Vec2< int > &theDragFrom, const NCollection_Vec2< int > &theDragTo, const AIS_DragAction theAction) |
| | Drag object in the viewer.
|
| |
| occ::handle< AIS_InteractiveContext > | GetContext () const |
| | Returns the context pointer to the interactive context.
|
| |
| bool | HasPresentation () const |
| | Returns TRUE when this object has a presentation in the current DisplayMode()
|
| |
| occ::handle< Prs3d_Presentation > | Presentation () const |
| | Returns the current presentation of this object according to the current DisplayMode()
|
| |
| void | SetAspect (const occ::handle< Prs3d_BasicAspect > &anAspect) |
| | Sets the graphic basic aspect to the current presentation.
|
| |
| | ~SelectMgr_SelectableObject () override |
| | Clears all selections of the object.
|
| |
| void | RecomputePrimitives () |
| | Re-computes the sensitive primitives for all modes. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection.
|
| |
| void | RecomputePrimitives (const int theMode) |
| | Re-computes the sensitive primitives which correspond to the <theMode>th selection mode. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection.
|
| |
| void | AddSelection (const occ::handle< SelectMgr_Selection > &aSelection, const int aMode) |
| | Adds the selection aSelection with the selection mode index aMode to this framework.
|
| |
| void | ClearSelections (const bool update=false) |
| | Empties all the selections in the SelectableObject <update> parameter defines whether all object's selections should be flagged for further update or not. This improved method can be used to recompute an object's selection (without redisplaying the object completely) when some selection mode is activated not for the first time.
|
| |
| const occ::handle< SelectMgr_Selection > & | Selection (const int theMode) const |
| | Returns the selection having specified selection mode or NULL.
|
| |
| bool | HasSelection (const int theMode) const |
| | Returns true if a selection corresponding to the selection mode theMode was computed for this object.
|
| |
| const NCollection_Sequence< occ::handle< SelectMgr_Selection > > & | Selections () const |
| | Return the sequence of selections.
|
| |
| void | ResetTransformation () override |
| | resets local transformation to identity.
|
| |
| void | UpdateTransformation () override |
| | Recomputes the location of the selection aSelection.
|
| |
| virtual void | UpdateTransformations (const occ::handle< SelectMgr_Selection > &aSelection) |
| | Updates locations in all sensitive entities from <aSelection> and in corresponding entity owners.
|
| |
| virtual void | HilightSelected (const occ::handle< PrsMgr_PresentationManager > &thePrsMgr, const NCollection_Sequence< occ::handle< SelectMgr_EntityOwner > > &theSeq) |
| | Method which draws selected owners ( for fast presentation draw )
|
| |
| virtual void | ClearSelected () |
| | Method which clear all selected owners belonging to this selectable object ( for fast presentation draw )
|
| |
| virtual void | ClearDynamicHighlight (const occ::handle< PrsMgr_PresentationManager > &theMgr) |
| | Method that needs to be implemented when the object manages selection and dynamic highlighting on its own. Clears or invalidates dynamic highlight presentation. By default it clears immediate draw of given presentation manager.
|
| |
| virtual void | HilightOwnerWithColor (const occ::handle< PrsMgr_PresentationManager > &thePM, const occ::handle< Prs3d_Drawer > &theStyle, const occ::handle< SelectMgr_EntityOwner > &theOwner) |
| | Method which hilight an owner belonging to this selectable object (for fast presentation draw)
|
| |
| virtual bool | IsAutoHilight () const |
| | If returns True, the old mechanism for highlighting selected objects is used (HilightSelected Method may be empty). If returns False, the HilightSelected method will be fully responsible for highlighting selected entity owners belonging to this selectable object.
|
| |
| virtual void | SetAutoHilight (const bool theAutoHilight) |
| | Set AutoHilight property to true or false.
|
| |
| occ::handle< Prs3d_Presentation > | GetHilightPresentation (const occ::handle< PrsMgr_PresentationManager > &thePrsMgr) |
| | Creates or returns existing presentation for highlighting detected object.
|
| |
| occ::handle< Prs3d_Presentation > | GetSelectPresentation (const occ::handle< PrsMgr_PresentationManager > &thePrsMgr) |
| | Creates or returns existing presentation for highlighting selected object.
|
| |
| virtual void | ErasePresentations (bool theToRemove) |
| | Removes presentations returned by GetHilightPresentation() and GetSelectPresentation().
|
| |
| void | SetZLayer (const Graphic3d_ZLayerId theLayerId) override |
| | Set Z layer ID and update all presentations of the selectable object. The layers mechanism allows drawing objects in higher layers in overlay of objects in lower layers.
|
| |
| void | UpdateSelection (const int theMode=-1) |
| | Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated.
|
| |
| void | SetAssemblyOwner (const occ::handle< SelectMgr_EntityOwner > &theOwner, const int theMode=-1) |
| | Sets common entity owner for assembly sensitive object entities.
|
| |
| Bnd_Box | BndBoxOfSelected (const occ::handle< NCollection_Shared< NCollection_IndexedMap< occ::handle< SelectMgr_EntityOwner > > > > &theOwners) |
| | Returns a bounding box of sensitive entities with the owners given if they are a part of activated selection.
|
| |
| int | GlobalSelectionMode () const |
| | Returns the mode for selection of object as a whole; 0 by default.
|
| |
| virtual occ::handle< SelectMgr_EntityOwner > | GlobalSelOwner () const |
| | Returns the owner of mode for selection of object as a whole.
|
| |
| virtual const occ::handle< SelectMgr_EntityOwner > & | GetAssemblyOwner () const |
| | Returns common entity owner if the object is an assembly.
|
| |
| void | DumpJson (Standard_OStream &theOStream, int theDepth=-1) const override |
| | Dumps the content of me into the stream.
|
| |
| NCollection_Sequence< occ::handle< PrsMgr_Presentation > > & | Presentations () |
| | Return presentations.
|
| |
| Graphic3d_ZLayerId | ZLayer () const |
| | Get ID of Z layer for main presentation.
|
| |
| bool | IsMutable () const |
| | Returns true if object has mutable nature (content or location are be changed regularly). Mutable object will be managed in different way than static onces (another optimizations).
|
| |
| virtual void | SetMutable (const bool theIsMutable) |
| | Sets if the object has mutable nature (content or location will be changed regularly). This method should be called before object displaying to take effect.
|
| |
| const occ::handle< Graphic3d_ViewAffinity > & | ViewAffinity () const |
| | Return view affinity mask.
|
| |
| bool | HasDisplayMode () const |
| | Returns true if the Interactive Object has display mode setting overriding global setting (within Interactive Context).
|
| |
| int | DisplayMode () const |
| | Returns the display mode setting of the Interactive Object. The range of supported display mode indexes should be specified within object definition and filtered by AccepDisplayMode().
|
| |
| void | SetDisplayMode (const int theMode) |
| | Sets the display mode for the interactive object. An object can have its own temporary display mode, which is different from that proposed by the interactive context.
|
| |
| void | UnsetDisplayMode () |
| | Removes display mode settings from the interactive object.
|
| |
| bool | HasHilightMode () const |
| | Returns true if the Interactive Object is in highlight mode.
|
| |
| int | HilightMode () const |
| | Returns highlight display mode. This is obsolete method for backward compatibility - use HilightAttributes() and DynamicHilightAttributes() instead.
|
| |
| void | SetHilightMode (const int theMode) |
| | Sets highlight display mode. This is obsolete method for backward compatibility - use HilightAttributes() and DynamicHilightAttributes() instead.
|
| |
| void | UnsetHilightMode () |
| | Unsets highlight display mode.
|
| |
| virtual int | DefaultDisplayMode () const |
| | Returns the default display mode.
|
| |
| bool | ToBeUpdated (bool theToIncludeHidden=false) const |
| | Returns TRUE if any active presentation has invalidation flag.
|
| |
| void | SetToUpdate (int theMode) |
| | Flags presentation to be updated; UpdatePresentations() will recompute these presentations.
|
| |
| void | SetToUpdate () |
| | flags all the Presentations to be Updated.
|
| |
| bool | IsInfinite () const |
| | Returns true if the interactive object is infinite; FALSE by default. This flag affects various operations operating on bounding box of graphic presentations of this object. For instance, infinite objects are not taken in account for View FitAll. This does not necessarily means that object is actually infinite, auxiliary objects might be also marked with this flag to achieve desired behavior.
|
| |
| void | SetInfiniteState (const bool theFlag=true) |
| | Sets if object should be considered as infinite.
|
| |
| PrsMgr_TypeOfPresentation3d | TypeOfPresentation3d () const |
| | Returns information on whether the object accepts display in HLR mode or not.
|
| |
| void | SetTypeOfPresentation (const PrsMgr_TypeOfPresentation3d theType) |
| | Set type of presentation.
|
| |
| PrsMgr_DisplayStatus | DisplayStatus () const |
| | Return presentation display status; PrsMgr_DisplayStatus_None by default.
|
| |
| const occ::handle< Prs3d_Drawer > & | Attributes () const |
| | Initializes the drawing tool theDrawer.
|
| |
| virtual void | SetAttributes (const occ::handle< Prs3d_Drawer > &theDrawer) |
| | Initializes the drawing tool theDrawer.
|
| |
| const occ::handle< Prs3d_Drawer > & | HilightAttributes () const |
| | Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalSelected and Prs3d_TypeOfHighlight_Selected defined within AIS_InteractiveContext::HighlightStyle().
|
| |
| virtual void | SetHilightAttributes (const occ::handle< Prs3d_Drawer > &theDrawer) |
| | Initializes the hilight drawing tool theDrawer.
|
| |
| const occ::handle< Prs3d_Drawer > & | DynamicHilightAttributes () const |
| | Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalDynamic and Prs3d_TypeOfHighlight_Dynamic defined within AIS_InteractiveContext::HighlightStyle().
|
| |
| virtual void | SetDynamicHilightAttributes (const occ::handle< Prs3d_Drawer > &theDrawer) |
| | Initializes the dynamic hilight drawing tool.
|
| |
| virtual void | UnsetHilightAttributes () |
| | Clears settings provided by the hilight drawing tool theDrawer.
|
| |
| void | SynchronizeAspects () |
| | Synchronize presentation aspects after their modification.
|
| |
| const occ::handle< Graphic3d_TransformPers > & | TransformPersistence () const |
| | Sets up Transform Persistence defining a special Local Coordinate system where this object should be located. Note that management of Transform Persistence object is more expensive than of the normal one, because it requires its position being recomputed basing on camera position within each draw call / traverse.
|
| |
| virtual void | SetTransformPersistence (const occ::handle< Graphic3d_TransformPers > &theTrsfPers) |
| | Sets up Transform Persistence defining a special Local Coordinate system where this object should be located. Note that management of Transform Persistence object is more expensive than of the normal one, because it requires its position being recomputed basing on camera position within each draw call / traverse.
|
| |
| const occ::handle< TopLoc_Datum3D > & | LocalTransformationGeom () const |
| | Return the local transformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence.
|
| |
| void | SetLocalTransformation (const gp_Trsf &theTrsf) |
| | Sets local transformation to theTransformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence.
|
| |
| void | SetLocalTransformation (const occ::handle< TopLoc_Datum3D > &theTrsf) |
| | Sets local transformation to theTransformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence.
|
| |
| bool | HasTransformation () const |
| | Returns true if object has a transformation that is different from the identity.
|
| |
| const occ::handle< TopLoc_Datum3D > & | TransformationGeom () const |
| | Return the transformation taking into account transformation of parent object(s). Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence.
|
| |
| const gp_Trsf & | LocalTransformation () const |
| | Return the local transformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence.
|
| |
| const gp_Trsf & | Transformation () const |
| | Return the transformation taking into account transformation of parent object(s). Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence.
|
| |
| const gp_GTrsf & | InversedTransformation () const |
| | Return inversed transformation.
|
| |
| const occ::handle< TopLoc_Datum3D > & | CombinedParentTransformation () const |
| | Return combined parent transformation.
|
| |
| virtual void | RecomputeTransformation (const occ::handle< Graphic3d_Camera > &theProjector) |
| | Calculates object presentation for specific camera position. Each of the views in the viewer and every modification such as rotation, for example, entails recalculation.
|
| |
| const occ::handle< Graphic3d_SequenceOfHClipPlane > & | ClipPlanes () const |
| | Set clip planes for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes.
|
| |
| virtual void | SetClipPlanes (const occ::handle< Graphic3d_SequenceOfHClipPlane > &thePlanes) |
| | Set clip planes for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes.
|
| |
| virtual void | AddClipPlane (const occ::handle< Graphic3d_ClipPlane > &thePlane) |
| | Adds clip plane for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes.
|
| |
| virtual void | RemoveClipPlane (const occ::handle< Graphic3d_ClipPlane > &thePlane) |
| | Removes previously added clip plane.
|
| |
| PrsMgr_PresentableObject * | Parent () const |
| | Returns children of the current object.
|
| |
| const NCollection_List< occ::handle< PrsMgr_PresentableObject > > & | Children () const |
| | Returns children of the current object.
|
| |
| virtual void | AddChild (const occ::handle< PrsMgr_PresentableObject > &theObject) |
| | Makes theObject child of current object in scene hierarchy.
|
| |
| void | AddChildWithCurrentTransformation (const occ::handle< PrsMgr_PresentableObject > &theObject) |
| | Makes theObject child of current object in scene hierarchy with keeping the current global transformation So the object keeps the same position/orientation in the global CS.
|
| |
| virtual void | RemoveChild (const occ::handle< PrsMgr_PresentableObject > &theObject) |
| | Removes theObject from children of current object in scene hierarchy.
|
| |
| void | RemoveChildWithRestoreTransformation (const occ::handle< PrsMgr_PresentableObject > &theObject) |
| | Removes theObject from children of current object in scene hierarchy with keeping the current global transformation. So the object keeps the same position/orientation in the global CS.
|
| |
| bool | HasOwnPresentations () const |
| | Returns true if object should have own presentations.
|
| |
| virtual void | BoundingBox (Bnd_Box &theBndBox) |
| | Returns bounding box of object correspondingly to its current display mode. This method requires presentation to be already computed, since it relies on bounding box of presentation structures, which are supposed to be same/close amongst different display modes of this object.
|
| |
| void | SetIsoOnTriangulation (const bool theIsEnabled) |
| | Returns the current facing model which is in effect.
|
| |
| Aspect_TypeOfFacingModel | CurrentFacingModel () const |
| | Returns the current facing model which is in effect.
|
| |
| void | SetCurrentFacingModel (const Aspect_TypeOfFacingModel theModel=Aspect_TOFM_BOTH_SIDE) |
| | change the current facing model apply on polygons for SetColor(), SetTransparency(), SetMaterial() methods default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is applying both on the front and back face.
|
| |
| bool | HasColor () const |
| | Returns true if the Interactive Object has color.
|
| |
| bool | HasWidth () const |
| | Returns true if the Interactive Object has width.
|
| |
| double | Width () const |
| | Returns the width setting of the Interactive Object.
|
| |
| bool | HasMaterial () const |
| | Returns true if the Interactive Object has a setting for material.
|
| |
| bool | IsTransparent () const |
| | Returns true if there is a transparency setting.
|
| |
| virtual bool | HasPolygonOffsets () const |
| | Returns true if <myDrawer> has non-null shading aspect.
|
| |
| virtual void | PolygonOffsets (int &aMode, float &aFactor, float &aUnits) const |
| | Retrieves current polygon offsets settings from <myDrawer>.
|
| |
| virtual void | SetPolygonOffsets (const int aMode, const float aFactor=1.0, const float aUnits=0.0) |
| | Sets up polygon offsets for this object.
|
| |
| virtual void | UnsetAttributes () |
| | Clears settings provided by the drawing tool aDrawer.
|
| |
| void | ToBeUpdated (NCollection_List< int > &ListOfMode) const |
| | pointer to the parent object
|
| |
| bool | ToPropagateVisualState () const |
| | Get value of the flag "propagate visual state" It means that the display/erase/color visual state is propagated automatically to all children; by default, the flag is true.
|
| |
| void | SetPropagateVisualState (const bool theFlag) |
| | Change the value of the flag "propagate visual state".
|
| |
 Public Member Functions inherited from Standard_Transient |
| | Standard_Transient () |
| | Empty constructor.
|
| |
| | Standard_Transient (const Standard_Transient &) |
| | Copy constructor – does nothing.
|
| |
| Standard_Transient & | operator= (const Standard_Transient &) |
| | Assignment operator, needed to avoid copying reference counter.
|
| |
| virtual | ~Standard_Transient ()=default |
| | Destructor must be virtual.
|
| |
| virtual const opencascade::handle< Standard_Type > & | DynamicType () const |
| | Returns a type descriptor about this object.
|
| |
| bool | IsInstance (const opencascade::handle< Standard_Type > &theType) const |
| | Returns a true value if this is an instance of Type.
|
| |
| bool | IsInstance (const char *const theTypeName) const |
| | Returns a true value if this is an instance of TypeName.
|
| |
| bool | IsKind (const opencascade::handle< Standard_Type > &theType) const |
| | Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
|
| |
| bool | IsKind (const char *const theTypeName) const |
| | Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.
|
| |
| Standard_Transient * | This () const |
| | Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.
|
| |
| int | GetRefCount () const noexcept |
| | Get the reference counter of this object.
|
| |
| void | IncrementRefCounter () noexcept |
| | Increments the reference counter of this object. Uses relaxed memory ordering since incrementing only requires atomicity, not synchronization with other memory operations.
|
| |
| int | DecrementRefCounter () noexcept |
| | Decrements the reference counter of this object; returns the decremented value. Uses release ordering for the decrement to ensure all writes to the object are visible before the count reaches zero. An acquire fence is added only when the count reaches zero, ensuring proper synchronization before deletion. This is more efficient than using acq_rel for every decrement.
|
| |
| virtual void | Delete () const |
| | Memory deallocator for transient classes.
|
| |
1.10.0