|
| | XCAFPrs_AISObject (const TDF_Label &theLabel) |
| | Creates an object to visualise the shape label. More...
|
| |
| const TDF_Label & | GetLabel () const |
| | Returns the label which was visualised by this presentation. More...
|
| |
| void | SetLabel (const TDF_Label &theLabel) |
| | Assign the label to this presentation (but does not mark it outdated with SetToUpdate()). More...
|
| |
| virtual void | DispatchStyles (const Standard_Boolean theToSyncStyles=Standard_False) |
| | Fetch the Shape from associated Label and fill the map of sub-shapes styles. By default, this method is called implicitly within first ::Compute(). Application might call this method explicitly to manipulate styles afterwards. More...
|
| |
| virtual void | SetMaterial (const Graphic3d_MaterialAspect &theMaterial) override |
| | Sets the material aspect. This method assigns the new default material without overriding XDE styles. Re-computation of existing presentation is not required after calling this method. More...
|
| |
| | AIS_ColoredShape (const TopoDS_Shape &theShape) |
| | Default constructor. More...
|
| |
| | AIS_ColoredShape (const Handle< AIS_Shape > &theShape) |
| | Copy constructor. More...
|
| |
| virtual Handle< AIS_ColoredDrawer > | CustomAspects (const TopoDS_Shape &theShape) |
| | Customize properties of specified sub-shape. The shape will be stored in the map but ignored, if it is not sub-shape of main Shape! This method can be used to mark sub-shapes with customizable properties. More...
|
| |
| virtual void | ClearCustomAspects () |
| | Reset the map of custom sub-shape aspects. More...
|
| |
| void | UnsetCustomAspects (const TopoDS_Shape &theShape, const Standard_Boolean theToUnregister=Standard_False) |
| | Reset custom properties of specified sub-shape. More...
|
| |
| void | SetCustomColor (const TopoDS_Shape &theShape, const Quantity_Color &theColor) |
| | Customize color of specified sub-shape. More...
|
| |
| void | SetCustomWidth (const TopoDS_Shape &theShape, const Standard_Real theLineWidth) |
| | Customize line width of specified sub-shape. More...
|
| |
| const AIS_DataMapOfShapeDrawer & | CustomAspectsMap () const |
| | Return the map of custom aspects. More...
|
| |
| AIS_DataMapOfShapeDrawer & | ChangeCustomAspectsMap () |
| | Return the map of custom aspects. More...
|
| |
| virtual void | SetColor (const Quantity_Color &theColor) override |
| | Setup color of entire shape. More...
|
| |
| virtual void | SetWidth (const Standard_Real theLineWidth) override |
| | Setup line width of entire shape. More...
|
| |
| virtual void | SetTransparency (const Standard_Real theValue) override |
| | Sets transparency value. More...
|
| |
| virtual void | UnsetTransparency () override |
| | Removes the setting for transparency in the reconstructed compound shape. More...
|
| |
| | AIS_Shape (const TopoDS_Shape &shap) |
| | Initializes construction of the shape shap from wires, edges and vertices. More...
|
| |
| virtual Standard_Integer | Signature () const override |
| | Returns index 0. This value refers to SHAPE from TopAbs_ShapeEnum. More...
|
| |
| virtual AIS_KindOfInteractive | Type () const override |
| | Returns Object as the type of Interactive Object. More...
|
| |
| virtual Standard_Boolean | AcceptShapeDecomposition () const override |
| | Returns true if the Interactive Object accepts shape decomposition. More...
|
| |
| void | Set (const TopoDS_Shape &theShape) |
| | Constructs an instance of the shape object theShape. More...
|
| |
| const TopoDS_Shape & | Shape () const |
| | Returns this shape object. More...
|
| |
| Standard_Boolean | SetOwnDeviationCoefficient () |
| | Sets a local value for deviation coefficient for this specific shape. More...
|
| |
| Standard_Boolean | SetOwnHLRDeviationCoefficient () |
| | Sets a local value for HLR deviation coefficient for this specific shape. More...
|
| |
| Standard_Boolean | SetOwnDeviationAngle () |
| | Sets a local value for deviation angle for this specific shape. More...
|
| |
| Standard_Boolean | SetOwnHLRDeviationAngle () |
| | Sets a local value for HLR deviation angle for this specific shape. More...
|
| |
| void | SetOwnDeviationCoefficient (const Standard_Real aCoefficient) |
| | Sets a local value for deviation coefficient for this specific shape. More...
|
| |
| void | SetOwnHLRDeviationCoefficient (const Standard_Real aCoefficient) |
| | sets myOwnHLRDeviationCoefficient field in Prs3d_Drawer & recomputes presentation More...
|
| |
| void | SetAngleAndDeviation (const Standard_Real anAngle) |
| | this compute a new angle and Deviation from the value anAngle and set the values stored in myDrawer with these that become local to the shape More...
|
| |
| Standard_Real | UserAngle () const |
| | gives back the angle initial value put by the User. More...
|
| |
| void | SetOwnDeviationAngle (const Standard_Real anAngle) |
| | sets myOwnDeviationAngle field in Prs3d_Drawer & recomputes presentation More...
|
| |
| void | SetHLRAngleAndDeviation (const Standard_Real anAngle) |
| | this compute a new Angle and Deviation from the value anAngle for HLR and set the values stored in myDrawer for with these that become local to the shape More...
|
| |
| void | SetOwnHLRDeviationAngle (const Standard_Real anAngle) |
| | sets myOwnHLRDeviationAngle field in Prs3d_Drawer & recomputes presentation More...
|
| |
| Standard_Boolean | OwnDeviationCoefficient (Standard_Real &aCoefficient, Standard_Real &aPreviousCoefficient) const |
| | Returns true and the values of the deviation coefficient aCoefficient and the previous deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned. More...
|
| |
| Standard_Boolean | OwnHLRDeviationCoefficient (Standard_Real &aCoefficient, Standard_Real &aPreviousCoefficient) const |
| | Returns true and the values of the HLR deviation coefficient aCoefficient and the previous HLR deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned. More...
|
| |
| Standard_Boolean | OwnDeviationAngle (Standard_Real &anAngle, Standard_Real &aPreviousAngle) const |
| | Returns true and the values of the deviation angle anAngle and the previous deviation angle aPreviousAngle. If these values are not already set, false is returned. More...
|
| |
| Standard_Boolean | OwnHLRDeviationAngle (Standard_Real &anAngle, Standard_Real &aPreviousAngle) const |
| | Returns true and the values of the HLR deviation angle anAngle and of the previous HLR deviation angle aPreviousAngle. If these values are not already set, false is returned. More...
|
| |
| void | SetTypeOfHLR (const Prs3d_TypeOfHLR theTypeOfHLR) |
| | Sets the type of HLR algorithm used by the shape. More...
|
| |
| Prs3d_TypeOfHLR | TypeOfHLR () const |
| | Gets the type of HLR algorithm. More...
|
| |
| virtual void | UnsetColor () override |
| | Removes settings for color in the reconstructed compound shape. More...
|
| |
| virtual void | UnsetWidth () override |
| | Removes the setting for line width in the reconstructed compound shape. More...
|
| |
| virtual void | UnsetMaterial () override |
| | Removes settings for material in the reconstructed compound shape. More...
|
| |
| virtual const Bnd_Box & | BoundingBox () |
| | Constructs a bounding box with which to reconstruct compound topological shapes for presentation. More...
|
| |
| virtual void | Color (Quantity_Color &aColor) const override |
| | Returns the Color attributes of the shape accordingly to the current facing model;. More...
|
| |
| virtual Graphic3d_NameOfMaterial | Material () const override |
| | Returns the NameOfMaterial attributes of the shape accordingly to the current facing model;. More...
|
| |
| virtual Standard_Real | Transparency () const override |
| | Returns the transparency attributes of the shape accordingly to the current facing model;. More...
|
| |
| const gp_Pnt2d & | TextureRepeatUV () const |
| | Return texture repeat UV values; (1, 1) by default. More...
|
| |
| void | SetTextureRepeatUV (const gp_Pnt2d &theRepeatUV) |
| | Sets the number of occurrences of the texture on each face. The texture itself is parameterized in (0,1) by (0,1). Each face of the shape to be textured is parameterized in UV space (Umin,Umax) by (Vmin,Vmax). More...
|
| |
| const gp_Pnt2d & | TextureOriginUV () const |
| | Return texture origin UV position; (0, 0) by default. More...
|
| |
| void | SetTextureOriginUV (const gp_Pnt2d &theOriginUV) |
| | Use this method to change the origin of the texture. The texel (0,0) will be mapped to the surface (myUVOrigin.X(), myUVOrigin.Y()). More...
|
| |
| const gp_Pnt2d & | TextureScaleUV () const |
| | Return scale factor for UV coordinates; (1, 1) by default. More...
|
| |
| void | SetTextureScaleUV (const gp_Pnt2d &theScaleUV) |
| | Use this method to scale the texture (percent of the face). You can specify a scale factor for both U and V. Example: if you set ScaleU and ScaleV to 0.5 and you enable texture repeat, the texture will appear twice on the face in each direction. More...
|
| |
| void | SetCurrentFacingModel (const Aspect_TypeOfFacingModel aModel=Aspect_TOFM_BOTH_SIDE) |
| | change the current facing model apply on polygons for SetColor(), SetTransparency(), SetMaterial() methods default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is applying both on the front and back face. More...
|
| |
| Aspect_TypeOfFacingModel | CurrentFacingModel () const |
| | Returns the current facing model which is in effect. More...
|
| |
| virtual Standard_Boolean | AcceptDisplayMode (const Standard_Integer aMode) const |
| | Returns true if the class of objects accepts the display mode aMode. The interactive context can have a default mode of representation for the set of Interactive Objects. This mode may not be accepted by a given class of objects. Consequently, this virtual method allowing us to get information about the class in question must be implemented. More...
|
| |
| virtual Standard_Integer | DefaultDisplayMode () const |
| | Returns the default display mode. This method is to be implemented when the main mode is not mode 0. More...
|
| |
| void | Redisplay (const Standard_Boolean AllModes=Standard_False) |
| | Updates the active presentation; if <AllModes> = Standard_True all the presentations inside are recomputed. IMPORTANT: It is preferable to call Redisplay method of corresponding AIS_InteractiveContext instance for cases when it is accessible. This method just redirects call to myCTXPtr, so this class field must be up to date for proper result. More...
|
| |
| void | SetInfiniteState (const Standard_Boolean aFlag=Standard_True) |
| | Sets the infinite state flag aFlage. if <aFlag> = True , the interactiveObject is considered as infinite, i.e. its graphic presentations are not taken in account for View FitAll... More...
|
| |
| Standard_Boolean | IsInfinite () const |
| | Returns true if the interactive object is infinite. In this case, its graphic presentations are not taken into account in the fit-all view. More...
|
| |
| Standard_Boolean | HasInteractiveContext () const |
| | Indicates whether the Interactive Object has a pointer to an interactive context. More...
|
| |
| Handle< AIS_InteractiveContext > | GetContext () const |
| | Returns the context pointer to the interactive context. More...
|
| |
| virtual void | SetContext (const Handle< AIS_InteractiveContext > &aCtx) |
| | Sets the interactive context aCtx and provides a link to the default drawing tool or "Drawer" if there is none. More...
|
| |
| Standard_Boolean | HasOwner () const |
| | Returns true if the object has an owner attributed to it. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. More...
|
| |
| const Handle< Standard_Transient > & | GetOwner () const |
| | Returns the owner of the Interactive Object. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. There are two types of owners: More...
|
| |
| void | SetOwner (const Handle< Standard_Transient > &theApplicativeEntity) |
| | Allows you to attribute the owner theApplicativeEntity to an Interactive Object. This can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of. The owner takes the form of a transient. More...
|
| |
| void | ClearOwner () |
| | Each Interactive Object has methods which allow us to attribute an Owner to it in the form of a Transient. This method removes the owner from the graphic entity. More...
|
| |
| Standard_Boolean | HasDisplayMode () const |
| | Returns true if the Interactive Object has a display mode setting. Otherwise, it is displayed in Neutral Point. More...
|
| |
| void | SetDisplayMode (const Standard_Integer aMode) |
| | Sets the display mode aMode for the interactive object. An object can have its own temporary display mode, which is different from that proposed by the interactive context. The range of possibilities currently proposed is the following: More...
|
| |
| void | UnsetDisplayMode () |
| | Removes display mode settings from the interactive object. More...
|
| |
| Standard_Integer | DisplayMode () const |
| | Returns the display mode setting of the Interactive Object. The range of possibilities is the following: More...
|
| |
| Standard_Boolean | HasHilightMode () const |
| | Returns true if the Interactive Object is in highlight mode. More...
|
| |
| Standard_Integer | HilightMode () const |
| | Returns highlight display mode. This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead. More...
|
| |
| void | SetHilightMode (const Standard_Integer theMode) |
| | Sets highlight display mode. This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead. More...
|
| |
| void | UnsetHilightMode () |
| | Unsets highlight display mode. More...
|
| |
| Standard_Boolean | HasColor () const |
| | Returns true if the Interactive Object has color. More...
|
| |
| Standard_Boolean | HasWidth () const |
| | Returns true if the Interactive Object has width. More...
|
| |
| Standard_Real | Width () const |
| | Returns the width setting of the Interactive Object. More...
|
| |
| Standard_Boolean | HasMaterial () const |
| | Returns true if the Interactive Object has a setting for material. More...
|
| |
| Standard_Boolean | IsTransparent () const |
| | Returns true if there is a transparency setting. More...
|
| |
| virtual void | UnsetAttributes () override |
| | Clears settings provided by the drawing tool aDrawer. More...
|
| |
| Standard_Boolean | HasPresentation () const |
| | Returns TRUE when this object has a presentation in the current DisplayMode() More...
|
| |
| Handle< Prs3d_Presentation > | Presentation () const |
| | Returns the current presentation of this object according to the current DisplayMode() More...
|
| |
| void | SetAspect (const Handle< Prs3d_BasicAspect > &anAspect) |
| | Sets the graphic basic aspect to the current presentation. More...
|
| |
| virtual void | SetPolygonOffsets (const Standard_Integer aMode, const Standard_ShortReal aFactor=1.0, const Standard_ShortReal aUnits=0.0) |
| | Sets up polygon offsets for this object. It modifies all existing presentations of <anObj> (if any), so it is reasonable to call this method after <anObj> has been displayed. Otherwise, Compute() method should pass Graphic3d_AspectFillArea3d aspect from <myDrawer> to Graphic3d_Group to make polygon offsets work. More...
|
| |
| virtual Standard_Boolean | HasPolygonOffsets () const |
| | Returns Standard_True if <myDrawer> has non-null shading aspect. More...
|
| |
| virtual void | PolygonOffsets (Standard_Integer &aMode, Standard_ShortReal &aFactor, Standard_ShortReal &aUnits) const |
| | Retrieves current polygon offsets settings from <myDrawer>. More...
|
| |
| virtual void | BoundingBox (Bnd_Box &theBndBox) override |
| | Returns bounding box of object correspondingly to its current display mode. More...
|
| |
| void | SetIsoOnTriangulation (const Standard_Boolean theIsEnabled) |
| | Enables or disables on-triangulation build of isolines according to the flag given. More...
|
| |
| void | SynchronizeAspects () |
| | Synchronize presentation aspects after their modification. More...
|
| |
| virtual | ~SelectMgr_SelectableObject () |
| | Clears all selections of the object. More...
|
| |
| void | RecomputePrimitives () |
| | Re-computes the sensitive primitives for all modes. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...
|
| |
| void | RecomputePrimitives (const Standard_Integer theMode) |
| | Re-computes the sensitive primitives which correspond to the <theMode>th selection mode. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...
|
| |
| void | AddSelection (const Handle< SelectMgr_Selection > &aSelection, const Standard_Integer aMode) |
| | Adds the selection aSelection with the selection mode index aMode to this framework. More...
|
| |
| void | ClearSelections (const Standard_Boolean update=Standard_False) |
| | Empties all the selections in the SelectableObject <update> parameter defines whether all object's selections should be flagged for further update or not. This improved method can be used to recompute an object's selection (without redisplaying the object completely) when some selection mode is activated not for the first time. More...
|
| |
| const Handle< SelectMgr_Selection > & | Selection (const Standard_Integer aMode) const |
| | Returns the selection Selection having the selection mode aMode. More...
|
| |
| virtual Standard_Boolean | HasSelection (const Standard_Integer theMode) const |
| | Returns true if a selection corresponding to the selection mode theMode was computed for this object. More...
|
| |
| void | Init () |
| | Begins the iteration scanning for sensitive primitives. More...
|
| |
| Standard_Boolean | More () const |
| | Continues the iteration scanning for sensitive primitives. More...
|
| |
| void | Next () |
| | Continues the iteration scanning for sensitive primitives. More...
|
| |
| const Handle< SelectMgr_Selection > & | CurrentSelection () const |
| | Returns the current selection in this framework. More...
|
| |
| void | ResetTransformation () override |
| | resets local transformation to identity. More...
|
| |
| virtual void | UpdateTransformation () override |
| | Recomputes the location of the selection aSelection. More...
|
| |
| virtual void | UpdateTransformations (const Handle< SelectMgr_Selection > &aSelection) |
| | Updates locations in all sensitive entities from <aSelection> and in corresponding entity owners. More...
|
| |
| virtual void | HilightSelected (const Handle< PrsMgr_PresentationManager3d > &PM, const SelectMgr_SequenceOfOwner &Seq) |
| | Method which draws selected owners ( for fast presentation draw ) More...
|
| |
| virtual void | ClearSelected () |
| | Method which clear all selected owners belonging to this selectable object ( for fast presentation draw ) More...
|
| |
| virtual void | ClearDynamicHighlight (const Handle< PrsMgr_PresentationManager3d > &theMgr) |
| | Method that needs to be implemented when the object manages selection and dynamic highlighting on its own. Clears or invalidates dynamic highlight presentation. By default it clears immediate draw of given presentation manager. More...
|
| |
| virtual void | HilightOwnerWithColor (const Handle< PrsMgr_PresentationManager3d > &thePM, const Handle< Prs3d_Drawer > &theStyle, const Handle< SelectMgr_EntityOwner > &theOwner) |
| | Method which hilight an owner belonging to this selectable object ( for fast presentation draw ) More...
|
| |
| virtual Standard_Boolean | IsAutoHilight () const |
| | If returns True, the old mechanism for highlighting selected objects is used (HilightSelected Method may be empty). If returns False, the HilightSelected method will be fully responsible for highlighting selected entity owners belonging to this selectable object. More...
|
| |
| virtual void | SetAutoHilight (const Standard_Boolean newAutoHilight) |
| | Set AutoHilight property to true or false Sets up Transform Persistence Mode for this object. More...
|
| |
| Handle< Prs3d_Presentation > | GetHilightPresentation (const Handle< PrsMgr_PresentationManager3d > &TheMgr) |
| |
| Handle< Prs3d_Presentation > | GetSelectPresentation (const Handle< PrsMgr_PresentationManager3d > &TheMgr) |
| |
| virtual void | ErasePresentations (Standard_Boolean theToRemove) |
| | Removes presentations returned by GetHilightPresentation() and GetSelectPresentation(). More...
|
| |
| virtual void | SetZLayer (const Graphic3d_ZLayerId theLayerId) override |
| | Set Z layer ID and update all presentations of the selectable object. The layers mechanism allows drawing objects in higher layers in overlay of objects in lower layers. More...
|
| |
| void | UpdateSelection (const Standard_Integer theMode=-1) |
| | Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated. More...
|
| |
| void | SetAssemblyOwner (const Handle< SelectMgr_EntityOwner > &theOwner, const Standard_Integer theMode=-1) |
| | Sets common entity owner for assembly sensitive object entities. More...
|
| |
| const Handle< SelectMgr_EntityOwner > & | GetAssemblyOwner () const |
| | Returns common entity owner if the object is an assembly. More...
|
| |
| Bnd_Box | BndBoxOfSelected (const Handle< SelectMgr_IndexedMapOfOwner > &theOwners) |
| | Returns a bounding box of sensitive entities with the owners given if they are a part of activated selection. More...
|
| |
| Standard_Integer | GlobalSelectionMode () const |
| | Returns the mode for selection of object as a whole. More...
|
| |
| virtual Handle< SelectMgr_EntityOwner > | GlobalSelOwner () const |
| | Returns the owner of mode for selection of object as a whole. More...
|
| |
| PrsMgr_Presentations & | Presentations () |
| |
| PrsMgr_TypeOfPresentation3d | TypeOfPresentation3d () const |
| | Returns information on whether the object accepts display in HLR mode or not. More...
|
| |
| const Handle< Graphic3d_TransformPers > & | TransformPersistence () const |
| |
| virtual void | SetTransformPersistence (const Handle< Graphic3d_TransformPers > &theTrsfPers) |
| | Sets up Transform Persistence for this object. More...
|
| |
| | Standard_DEPRECATED ("This method is deprecated - SetTransformPersistence() taking Graphic3d_TransformPers should be called instead") void SetTransformPersistence(const Graphic3d_TransModeFlags theMode |
| | Sets up Transform Persistence Mode for this object. This function used to lock in object position, rotation and / or zooming relative to camera position. Object will be drawn in the origin setted by thePoint parameter (except Graphic3d_TMF_TriedronPers flag. More...
|
| |
| void | SetTypeOfPresentation (const PrsMgr_TypeOfPresentation3d aType) |
| |
| void | SetToUpdate (const Standard_Integer aMode) |
| | flags the Prs of mode <AMode> to be Updated. the Update will be done when needed. More...
|
| |
| void | SetToUpdate () |
| | flags all the Presentations to be Updated. More...
|
| |
| void | ToBeUpdated (TColStd_ListOfInteger &ListOfMode) const |
| | gives the list of modes which are flagged "to be updated". More...
|
| |
| const Handle< Geom_Transformation > & | LocalTransformationGeom () const |
| | Return the local transformation. More...
|
| |
| void | SetLocalTransformation (const gp_Trsf &theTrsf) |
| | Sets local transformation to theTransformation. More...
|
| |
| void | SetLocalTransformation (const Handle< Geom_Transformation > &theTrsf) |
| | Sets local transformation to theTransformation. More...
|
| |
| Standard_Boolean | HasTransformation () const |
| | Returns true if object has a transformation that is different from the identity. More...
|
| |
| const Handle< Geom_Transformation > & | TransformationGeom () const |
| | Return the transformation taking into account transformation of parent object(s). More...
|
| |
| const gp_Trsf & | LocalTransformation () const |
| | Return the local transformation. More...
|
| |
| const gp_Trsf & | Transformation () const |
| | Return the transformation taking into account transformation of parent object(s). More...
|
| |
| const gp_GTrsf & | InversedTransformation () const |
| |
| virtual void | UpdateTransformation (const Handle< Prs3d_Presentation > &P) |
| |
| Graphic3d_ZLayerId | ZLayer () const |
| | Get ID of Z layer. More...
|
| |
| virtual void | AddClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane) |
| | Adds clip plane for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be substracted from limit to predict the maximum possible number of object clipping planes. More...
|
| |
| virtual void | RemoveClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane) |
| | Removes previously added clip plane. More...
|
| |
| virtual void | SetClipPlanes (const Handle< Graphic3d_SequenceOfHClipPlane > &thePlanes) |
| | Set clip planes for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes. More...
|
| |
| | Standard_DEPRECATED ("This method is deprecated - overload taking Handle should be used instead") void SetClipPlanes(const Graphic3d_SequenceOfHClipPlane &thePlanes) |
| |
| const Handle< Graphic3d_SequenceOfHClipPlane > & | ClipPlanes () const |
| | Get clip planes. More...
|
| |
| virtual void | SetMutable (const Standard_Boolean theIsMutable) |
| | Sets if the object has mutable nature (content or location will be changed regularly). This method should be called before object displaying to take effect. More...
|
| |
| Standard_Boolean | IsMutable () const |
| | Returns true if object has mutable nature (content or location are be changed regularly). Mutable object will be managed in different way than static onces (another optimizations). More...
|
| |
| virtual void | AddChild (const Handle< PrsMgr_PresentableObject > &theObject) |
| | Makes theObject child of current object in scene hierarchy. More...
|
| |
| virtual void | RemoveChild (const Handle< PrsMgr_PresentableObject > &theObject) |
| | Removes theObject from children of current object in scene hierarchy. More...
|
| |
| const PrsMgr_ListOfPresentableObjects & | Children () const |
| | Returns children of the current object. More...
|
| |
| Standard_Boolean | HasOwnPresentations () const |
| | Returns true if object should have own presentations. More...
|
| |
| PrsMgr_PresentableObjectPointer | Parent () const |
| | Returns parent of current object in scene hierarchy. More...
|
| |
| virtual void | SetAttributes (const Handle< Prs3d_Drawer > &theDrawer) |
| | Initializes the drawing tool theDrawer. More...
|
| |
| const Handle< Prs3d_Drawer > & | Attributes () const |
| | Returns the attributes settings. More...
|
| |
| const Handle< Prs3d_Drawer > & | HilightAttributes () const |
| | Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalSelected and Prs3d_TypeOfHighlight_Selected defined within AIS_InteractiveContext. More...
|
| |
| virtual void | SetHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer) |
| | Initializes the hilight drawing tool theDrawer. More...
|
| |
| const Handle< Prs3d_Drawer > & | DynamicHilightAttributes () const |
| | Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalDynamic and Prs3d_TypeOfHighlight_Dynamic defined within AIS_InteractiveContext. More...
|
| |
| virtual void | SetDynamicHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer) |
| | Initializes the dynamic hilight drawing tool. More...
|
| |
| virtual void | UnsetHilightAttributes () |
| | Clears settings provided by the hilight drawing tool theDrawer. More...
|
| |
 Public Member Functions inherited from Standard_Transient |
| | Standard_Transient () |
| | Empty constructor. More...
|
| |
| | Standard_Transient (const Standard_Transient &) |
| | Copy constructor – does nothing. More...
|
| |
| Standard_Transient & | operator= (const Standard_Transient &) |
| | Assignment operator, needed to avoid copying reference counter. More...
|
| |
| virtual | ~Standard_Transient () |
| | Destructor must be virtual. More...
|
| |
| virtual void | Delete () const |
| | Memory deallocator for transient classes. More...
|
| |
| virtual const opencascade::handle< Standard_Type > & | DynamicType () const |
| | Returns a type descriptor about this object. More...
|
| |
| Standard_Boolean | IsInstance (const opencascade::handle< Standard_Type > &theType) const |
| | Returns a true value if this is an instance of Type. More...
|
| |
| Standard_Boolean | IsInstance (const Standard_CString theTypeName) const |
| | Returns a true value if this is an instance of TypeName. More...
|
| |
| Standard_Boolean | IsKind (const opencascade::handle< Standard_Type > &theType) const |
| | Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
|
| |
| Standard_Boolean | IsKind (const Standard_CString theTypeName) const |
| | Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
|
| |
| Standard_Transient * | This () const |
| | Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
|
| |
| Standard_Integer | GetRefCount () const |
| | Get the reference counter of this object. More...
|
| |
| void | IncrementRefCounter () const |
| | Increments the reference counter of this object. More...
|
| |
| Standard_Integer | DecrementRefCounter () const |
| | Decrements the reference counter of this object; returns the decremented value. More...
|
| |
