Modeling Data and Algorithms - Page 2 | Forum Open CASCADE Technology

	Topic	Replies	Last reply
Normal topic	Drawing a guide line in a 3D modeö By Uli Müglitz 1 year 3 weeks ago	0	n/a
Normal topic	Minimal distance from 3D ray to TopoDS_Edge By Caleb Smith 1 year 3 weeks ago	0	n/a
Normal topic	BRepAlgoAPI_Cut can not cut By Jihui Cong 1 year 1 month ago	0	n/a
Normal topic	How to get "islands" from cut operations By Alfredo Gutierrez 1 year 2 months ago	3	By Kishore Banothu 1 year 1 month ago
Normal topic	How to extract the correctly oriented normal on a face at one point. : GeomLProp_SLProps & TopoDS_Iterator By Mark Lemon 1 year 1 month ago	1	By Dmitrii Pasukhin 1 year 1 month ago
Normal topic	BrepMesh_IncrementalMesh or Bnd_Box error. By zhang jiawang 1 year 1 month ago	1	By Dmitrii Pasukhin 1 year 1 month ago
Normal topic	Stacked control points in Geom_BSplineCurve By Michael Capocci 1 year 1 month ago	2	By Michael Capocci 1 year 1 month ago
Normal topic	how to implement the twist feature By Elle Edition 1 year 1 month ago	1	By w d 1 year 1 month ago
Normal topic	IMeshTools_Parameters -> searching for parameters for a good mesh on cap of cylinder By Caleb Smith 1 year 1 month ago	9	By Giovanni Bettega 1 year 1 month ago
Normal topic	BRepOffsetAPI_MakeOffset not work when offset inside By jack-wangss 1 year 1 month ago	2	By jack-wangss 1 year 1 month ago
Normal topic	Why BOPAlgo_Builder can not work By Jihui Cong 1 year 1 month ago	8	By Jihui Cong 1 year 1 month ago
Normal topic	Poly_Triangulation -> determine is edge of triangle inner or outer? By Caleb Smith 1 year 1 month ago	2	By Caleb Smith 1 year 1 month ago
Normal topic	Sweep with 2 rails By Arman Rashoyan 1 year 1 month ago	0	n/a
Normal topic	Split algorithm can not work correctly By Jihui Cong 1 year 11 months ago	5	By Jihui Cong 1 year 1 month ago
Normal topic	Directed Projection By Lee Kania 1 year 1 month ago	0	n/a
Normal topic	Finding Convex Hull of a shape By Daiva Daiva 1 year 6 months ago	3	By sOup x 1 year 2 months ago
Normal topic	Empty Sectioning Result with BOPAlgo_Section on XCAFPrs_AISObject By Xposeder 1 year 2 months ago	6	By Xposeder 1 year 2 months ago
Normal topic	Edit the curve on the surface by dragging the control point By simon messi 1 year 2 months ago	2	By simon messi 1 year 2 months ago
Normal topic	How to get uv coordinates for Texture Mapping By Mason Chen 1 year 2 months ago	0	n/a
Normal topic	Questions about BRepAdaptor_Curve usage By sanjeev karandikar 1 year 2 months ago	1	By Dmitrii Pasukhin 1 year 2 months ago
Normal topic	Creating face on cylindrical surface By Kostadin Vrantzaliev 1 year 2 months ago	12	By gkv311 n 1 year 2 months ago
Normal topic	questions on BRepMesh_IncrementalMesh By KKL KKL 1 year 3 months ago	10	By Mikhail Sazonov 1 year 2 months ago
Normal topic	Why I could not use the function as TopoDS::Face() As it could not recognize TopoDS By 奕奇冷 1 year 3 months ago	1	By Dmitrii Pasukhin 1 year 3 months ago
Normal topic	Crash using BRepAlgoAPI_Common in Multithreading By charles meyer 1 year 3 months ago	6	By charles meyer 1 year 3 months ago
Normal topic	Create specific shape using edges and faces By L B 1 year 3 months ago	0	n/a
Normal topic	Tekla and OCCT By Nguyen Duc 1 year 3 months ago	1	By Dmitrii Pasukhin 1 year 3 months ago
Normal topic	3D geometry Boolean operations in OpenCascade By KKL KKL 1 year 3 months ago	1	By Dmitrii Pasukhin 1 year 3 months ago
Normal topic	A question about Approx_Curve3d and GeomFill_BSplineCurves By zm-iceboy 1 year 3 months ago	0	n/a
Normal topic	MakeThickSolid By Alex Gorbatovsky 1 year 3 months ago	3	By Alex Gorbatovsky 1 year 3 months ago
Normal topic	Why doest the result wire become a vertex? By Jihui Cong 1 year 3 months ago	0	n/a
Normal topic	how to create curve2d By simon messi 1 year 3 months ago	1	By tsunghung tsai 1 year 3 months ago
Normal topic	The problem of converting a surface obtained by intersection of an ellipsoid and a cuboid into a B-spline surface By Guido-X 2 years 2 weeks ago	5	By Mikhail Sazonov 1 year 3 months ago
Normal topic	Python0CC: Edges created from Intersection of surfaces By Adjei Ameyaw 1 year 3 months ago	0	n/a
Normal topic	Re-mesh previously meshed surface By Oliver R 5 years 9 months ago	7	By Gena Sorokin 1 year 3 months ago
Normal topic	Bug in BRepMesh_BaseAlgo (and BRepMesh_NodeInsertionMeshAlgo) By Tanyo Tanev 1 year 3 months ago	1	By Dmitrii Pasukhin 1 year 3 months ago
Normal topic	Same Geometry Different TopoDS_Edge By Jihui Cong 1 year 3 months ago	3	By gkv311 n 1 year 3 months ago
Normal topic	CAD Assistant - BRepMesh_IncrementalMesh - Parameters By miquel valverde 1 year 4 months ago	10	By miquel valverde 1 year 4 months ago
Normal topic	Triangle Mesh to Nurbs Surface By NessajHu 1 year 4 months ago	2	By Dmitrii Pasukhin 1 year 4 months ago
Normal topic	Face and Circle Intersection By Piotr Dusiński 1 year 4 months ago	3	By Piotr Dusiński 1 year 4 months ago
Normal topic	UV parameters of NURBS surface By Dikran Bakkalian 1 year 4 months ago	0	n/a
Normal topic	How to scale or mirror a shape By Lion G. 2 years 9 months ago	7	By Minh Hiếu Vũ 1 year 4 months ago
Normal topic	Perform IntTools_FaceFace core dump By Lemon Nation 1 year 4 months ago	0	n/a
Normal topic	Points correspond to the point with the shortest distance to the ring By WELCool666 1 year 4 months ago	0	n/a
Normal topic	The parameters of the selected curve change By simon messi 1 year 4 months ago	1	By gkv311 n 1 year 4 months ago
Normal topic	Defeaturing class question By Lee Kania 1 year 4 months ago	4	By Lee Kania 1 year 4 months ago
Normal topic	Mesh the infinite face By Mason Chen 1 year 4 months ago	2	By Dmitrii Pasukhin 1 year 4 months ago
Normal topic	Erratic issue with the General Fuse algorithm By Massimiliano Leoni 1 year 5 months ago	15	By Dmitrii Pasukhin 1 year 4 months ago
Normal topic	Wrong Outer wire By lmaero 1 year 4 months ago	4	By lmaero 1 year 4 months ago
Normal topic	Is the DXF importer only available for sale? By 王冕 1 year 4 months ago	1	By Dmitrii Pasukhin 1 year 4 months ago
Normal topic	questions about point on surface By simon messi 1 year 4 months ago	1	By gkv311 n 1 year 4 months ago
Normal topic	Does TopoDS_Shape have its own transformation matrix ? By Sathiya nathan 1 year 5 months ago	4	By Sathiya nathan 1 year 5 months ago
Normal topic	Multi-threaded General Fuse/Partition By Massimiliano Leoni 1 year 5 months ago	3	By Massimiliano Leoni 1 year 5 months ago
Normal topic	Periodic Geom2d_BSplineCurve challenges By Aaron Michalk 1 year 5 months ago	0	n/a
Normal topic	OCCT 7.8.0 - ShapeUpgrade_UnifySameDomain premature termination By Tanyo Tanev 1 year 5 months ago	1	By Dmitrii Pasukhin 1 year 5 months ago
Normal topic	GeomAPI_PointsToBSpline 10x slower going from 7.5 to 7.8 By Luc Wens 1 year 5 months ago	6	By Dmitrii Pasukhin 1 year 5 months ago
Normal topic	Divide a solid face into multiple faces By Тимур Назаров 1 year 5 months ago	0	n/a
Normal topic	The issue in sweep perpendicular to the path. By kajanthan sures... 1 year 6 months ago	3	By Juan Antonio Lo... 1 year 5 months ago
Normal topic	Create a Spine for BRepOffsetAPI_MakePipe. How to Round the Vertex of a Wire? By Juan Antonio Lo... 1 year 5 months ago	0	n/a
Normal topic	Help in intersection between wire and plane By Cesare Caoduro 1 year 5 months ago	2	By Cesare Caoduro 1 year 5 months ago
Normal topic	Seeking Help with C2065 Error in C++ Code By frankrun King 1 year 5 months ago	6	By frankrun King 1 year 5 months ago
Normal topic	How to Fillet a 3D-Polyline? By Juan Antonio Lo... 1 year 5 months ago	0	n/a
Normal topic	BRepTools::OuterWire returns wrong wire By Arjan Schouten 1 year 6 months ago	3	By Dmitrii Pasukhin 1 year 6 months ago
Normal topic	Shape ortogonal to Wire not working for me in BRepOffsetAPI_MakePipeShell By Juan Antonio Lo... 1 year 6 months ago	0	n/a
Normal topic	How to verify if a face is trimmed By Boqing Dong 1 year 6 months ago	0	n/a
Normal topic	Errors in making an altered copy of a face By Boqing Dong 1 year 6 months ago	0	n/a
Normal topic	How to add solid thickness to closed shell? By kajanthan sures... 1 year 6 months ago	0	n/a
Normal topic	Difference of BRepPrimAPI_Make* and gp_* By Andrew Young 1 year 6 months ago	2	By Andrew Young 1 year 6 months ago
Normal topic	Converting TopoDS_Face to BSplineSurface By Oliver R 1 year 6 months ago	1	By Oliver R 1 year 6 months ago
Normal topic	BRepAlgoAPI_Cut -> SimplifyResult -> Crash! By Caleb Smith 1 year 7 months ago	10	By Caleb Smith 1 year 7 months ago
Normal topic	Wire/Edge orientation bug? By Lee Kania 1 year 7 months ago	0	n/a
Normal topic	Collapsed Edge Removal By Lee Kania 1 year 7 months ago	0	n/a
Normal topic	Disturbances ( torsion ?) when building a pipe with BRepOffsetAPI_MakePipe By Lue Mar 1 year 7 months ago	0	n/a
Normal topic	GeomLProp_SLProps sometimes doesn't calculate normals... By Caleb Smith 1 year 7 months ago	3	By Caleb Smith 1 year 7 months ago
Normal topic	Mirror Transform and Reversed Faces By Aaron Michalk 1 year 7 months ago	1	By Aaron Michalk 1 year 7 months ago
Normal topic	Check whether the segment lies inside the surface (flat face)? By Caleb Smith 1 year 7 months ago	0	n/a
Normal topic	Solids improperly translated at import By Lee Kania 1 year 7 months ago	8	By Lee Kania 1 year 7 months ago
Normal topic	Cylinder contour in CAD Assistant By Antoine H 1 year 7 months ago	1	By gkv311 n 1 year 7 months ago
Normal topic	Cylinder contour fix By Antoine H 1 year 7 months ago	0	n/a
Normal topic	BRepOffsetAPI_MakePipeShell fail to create a solid By w d 1 year 7 months ago	0	n/a
Normal topic	The result of BRepOffsetAPI_MakeOffsetShape is different for the same input values. By Suwan Park 1 year 7 months ago	2	By Suwan Park 1 year 7 months ago
Normal topic	Cut a box with a plane By Manon Jubert 1 year 7 months ago	6	By Thomas Anderson 1 year 7 months ago
Normal topic	failed to fillet with a shape By w d 1 year 7 months ago	2	By w d 1 year 7 months ago
Normal topic	Tracking Edge after transformation By Piotr Dusiński 1 year 7 months ago	0	n/a
Normal topic	BRepAlgo_Common is not thread-safe By Giovanni Bartolini 1 year 7 months ago	3	By gkv311 n 1 year 7 months ago
Normal topic	How to create a face/surface from the points By Vivek Shivasaga... 1 year 7 months ago	4	By Vivek Shivasaga... 1 year 7 months ago
Normal topic	BRepExtrema_DistShapeShape miss intersect point between two curve By w d 1 year 7 months ago	4	By w d 1 year 7 months ago
Normal topic	Edge discretization By Lee Kania 1 year 7 months ago	0	n/a
Normal topic	Problem when creating a shape By M M 1 year 7 months ago	0	n/a
Normal topic	Wrong Shape from the BRepAlgoAPI_Cut. By bin zhang 1 year 7 months ago	3	By Dmitrii Pasukhin 1 year 7 months ago
Normal topic	BRepExtrema_ExtCC crash issue in OCC 7.7.1 and OCC 7.7.2 upgrades By Prabhash Bopege 1 year 9 months ago	3	By Dmitrii Pasukhin 1 year 7 months ago
Normal topic	Can't Split two Objects By Erik Knudsen 1 year 7 months ago	0	n/a
Normal topic	I would like to ask if the "GeomAPI_ExtremaSurfaceSurface" class has any limitations. By zhang jiawang 1 year 7 months ago	0	n/a
Normal topic	How to obtain the intersection lines between a face and a sphere? By 1806610292 1 year 8 months ago	0	n/a
Normal topic	Get the enclosed area formed by the four face By liuyulvv 1 year 8 months ago	0	n/a
Normal topic	Retrieve Solid Objects form Shell By Piotr Dusiński 1 year 8 months ago	8	By Dmitrii Pasukhin 1 year 8 months ago
Normal topic	FEM Analysis with OCCT By Caleb Smith 1 year 8 months ago	2	By Caleb Smith 1 year 8 months ago
Normal topic	how to verify 2 faces share one same edge By Boqing Dong 1 year 8 months ago	4	By Dmitrii Pasukhin 1 year 8 months ago
Normal topic	Face and Edges after rotation By Piotr Dusiński 1 year 8 months ago	4	By Piotr Dusiński 1 year 8 months ago
Normal topic	error in calculating the shape volume By Boqing Dong 1 year 8 months ago	5	By Boqing Dong 1 year 8 months ago
Normal topic	Bend the plane according to the trajectory line By rongyu183 1 year 8 months ago	1	By Dmitrii Pasukhin 1 year 8 months ago