Open CASCADE Technology  7.3.1.dev
Static Public Member Functions
BRep_Tool Class Reference

Provides class methods to access to the geometry of BRep shapes. More...

#include <BRep_Tool.hxx>

Static Public Member Functions

static Standard_Boolean IsClosed (const TopoDS_Shape &S)
 If S is Shell, returns True if it has no free boundaries (edges). If S is Wire, returns True if it has no free ends (vertices). (Internal and External sub-shepes are ignored in these checks) If S is Edge, returns True if its vertices are the same. For other shape types returns S.Closed(). More...
 
static const Handle< Geom_Surface > & Surface (const TopoDS_Face &F, TopLoc_Location &L)
 Returns the geometric surface of the face. Returns in <L> the location for the surface. More...
 
static Handle< Geom_SurfaceSurface (const TopoDS_Face &F)
 Returns the geometric surface of the face. It can be a copy if there is a Location. More...
 
static const Handle< Poly_Triangulation > & Triangulation (const TopoDS_Face &F, TopLoc_Location &L)
 Returns the Triangulation of the face. It is a null handle if there is no triangulation. More...
 
static Standard_Real Tolerance (const TopoDS_Face &F)
 Returns the tolerance of the face. More...
 
static Standard_Boolean NaturalRestriction (const TopoDS_Face &F)
 Returns the NaturalRestriction flag of the face. More...
 
static Standard_Boolean IsGeometric (const TopoDS_Edge &E)
 Returns True if <E> is a 3d curve or a curve on surface. More...
 
static const Handle< Geom_Curve > & Curve (const TopoDS_Edge &E, TopLoc_Location &L, Standard_Real &First, Standard_Real &Last)
 Returns the 3D curve of the edge. May be a Null handle. Returns in <L> the location for the curve. In <First> and <Last> the parameter range. More...
 
static Handle< Geom_CurveCurve (const TopoDS_Edge &E, Standard_Real &First, Standard_Real &Last)
 Returns the 3D curve of the edge. May be a Null handle. In <First> and <Last> the parameter range. It can be a copy if there is a Location. More...
 
static const Handle< Poly_Polygon3D > & Polygon3D (const TopoDS_Edge &E, TopLoc_Location &L)
 Returns the 3D polygon of the edge. May be a Null handle. Returns in <L> the location for the polygon. More...
 
static Handle< Geom2d_CurveCurveOnSurface (const TopoDS_Edge &E, const TopoDS_Face &F, Standard_Real &First, Standard_Real &Last, Standard_Boolean *theIsStored=NULL)
 Returns the curve associated to the edge in the parametric space of the face. Returns a NULL handle if this curve does not exist. Returns in <First> and <Last> the parameter range. If the surface is a plane the curve can be not stored but created a new each time. The flag pointed by <theIsStored> serves to indicate storage status. It is valued if the pointer is non-null. More...
 
static Handle< Geom2d_CurveCurveOnSurface (const TopoDS_Edge &E, const Handle< Geom_Surface > &S, const TopLoc_Location &L, Standard_Real &First, Standard_Real &Last, Standard_Boolean *theIsStored=NULL)
 Returns the curve associated to the edge in the parametric space of the surface. Returns a NULL handle if this curve does not exist. Returns in <First> and <Last> the parameter range. If the surface is a plane the curve can be not stored but created a new each time. The flag pointed by <theIsStored> serves to indicate storage status. It is valued if the pointer is non-null. More...
 
static Handle< Geom2d_CurveCurveOnPlane (const TopoDS_Edge &E, const Handle< Geom_Surface > &S, const TopLoc_Location &L, Standard_Real &First, Standard_Real &Last)
 For the planar surface builds the 2d curve for the edge by projection of the edge on plane. Returns a NULL handle if the surface is not planar or the projection failed. More...
 
static void CurveOnSurface (const TopoDS_Edge &E, Handle< Geom2d_Curve > &C, Handle< Geom_Surface > &S, TopLoc_Location &L, Standard_Real &First, Standard_Real &Last)
 Returns in , <S>, <L> a 2d curve, a surface and a location for the edge <E>. and <S> are null if the edge has no curve on surface. Returns in <First> and <Last> the parameter range. More...
 
static void CurveOnSurface (const TopoDS_Edge &E, Handle< Geom2d_Curve > &C, Handle< Geom_Surface > &S, TopLoc_Location &L, Standard_Real &First, Standard_Real &Last, const Standard_Integer Index)
 Returns in , <S>, <L> the 2d curve, the surface and the location for the edge <E> of rank <Index>. and <S> are null if the index is out of range. Returns in <First> and <Last> the parameter range. More...
 
static Handle< Poly_Polygon2DPolygonOnSurface (const TopoDS_Edge &E, const TopoDS_Face &F)
 Returns the polygon associated to the edge in the parametric space of the face. Returns a NULL handle if this polygon does not exist. More...
 
static Handle< Poly_Polygon2DPolygonOnSurface (const TopoDS_Edge &E, const Handle< Geom_Surface > &S, const TopLoc_Location &L)
 Returns the polygon associated to the edge in the parametric space of the surface. Returns a NULL handle if this polygon does not exist. More...
 
static void PolygonOnSurface (const TopoDS_Edge &E, Handle< Poly_Polygon2D > &C, Handle< Geom_Surface > &S, TopLoc_Location &L)
 Returns in , <S>, <L> a 2d curve, a surface and a location for the edge <E>. and <S> are null if the edge has no polygon on surface. More...
 
static void PolygonOnSurface (const TopoDS_Edge &E, Handle< Poly_Polygon2D > &C, Handle< Geom_Surface > &S, TopLoc_Location &L, const Standard_Integer Index)
 Returns in , <S>, <L> the 2d curve, the surface and the location for the edge <E> of rank <Index>. and <S> are null if the index is out of range. More...
 
static const Handle< Poly_PolygonOnTriangulation > & PolygonOnTriangulation (const TopoDS_Edge &E, const Handle< Poly_Triangulation > &T, const TopLoc_Location &L)
 Returns the polygon associated to the edge in the parametric space of the face. Returns a NULL handle if this polygon does not exist. More...
 
static void PolygonOnTriangulation (const TopoDS_Edge &E, Handle< Poly_PolygonOnTriangulation > &P, Handle< Poly_Triangulation > &T, TopLoc_Location &L)
 Returns in. More...
 
static void PolygonOnTriangulation (const TopoDS_Edge &E, Handle< Poly_PolygonOnTriangulation > &P, Handle< Poly_Triangulation > &T, TopLoc_Location &L, const Standard_Integer Index)
 Returns in. More...
 
static Standard_Boolean IsClosed (const TopoDS_Edge &E, const TopoDS_Face &F)
 Returns True if <E> has two PCurves in the parametric space of <F>. i.e. <F> is on a closed surface and <E> is on the closing curve. More...
 
static Standard_Boolean IsClosed (const TopoDS_Edge &E, const Handle< Geom_Surface > &S, const TopLoc_Location &L)
 Returns True if <E> has two PCurves in the parametric space of <S>. i.e. <S> is a closed surface and <E> is on the closing curve. More...
 
static Standard_Boolean IsClosed (const TopoDS_Edge &E, const Handle< Poly_Triangulation > &T, const TopLoc_Location &L)
 Returns True if <E> has two arrays of indices in the triangulation <T>. More...
 
static Standard_Real Tolerance (const TopoDS_Edge &E)
 Returns the tolerance for <E>. More...
 
static Standard_Boolean SameParameter (const TopoDS_Edge &E)
 Returns the SameParameter flag for the edge. More...
 
static Standard_Boolean SameRange (const TopoDS_Edge &E)
 Returns the SameRange flag for the edge. More...
 
static Standard_Boolean Degenerated (const TopoDS_Edge &E)
 Returns True if the edge is degenerated. More...
 
static void Range (const TopoDS_Edge &E, Standard_Real &First, Standard_Real &Last)
 Gets the range of the 3d curve. More...
 
static void Range (const TopoDS_Edge &E, const Handle< Geom_Surface > &S, const TopLoc_Location &L, Standard_Real &First, Standard_Real &Last)
 Gets the range of the edge on the pcurve on the surface. More...
 
static void Range (const TopoDS_Edge &E, const TopoDS_Face &F, Standard_Real &First, Standard_Real &Last)
 Gets the range of the edge on the pcurve on the face. More...
 
static void UVPoints (const TopoDS_Edge &E, const Handle< Geom_Surface > &S, const TopLoc_Location &L, gp_Pnt2d &PFirst, gp_Pnt2d &PLast)
 Gets the UV locations of the extremities of the edge. More...
 
static void UVPoints (const TopoDS_Edge &E, const TopoDS_Face &F, gp_Pnt2d &PFirst, gp_Pnt2d &PLast)
 Gets the UV locations of the extremities of the edge. More...
 
static void SetUVPoints (const TopoDS_Edge &E, const Handle< Geom_Surface > &S, const TopLoc_Location &L, const gp_Pnt2d &PFirst, const gp_Pnt2d &PLast)
 Sets the UV locations of the extremities of the edge. More...
 
static void SetUVPoints (const TopoDS_Edge &E, const TopoDS_Face &F, const gp_Pnt2d &PFirst, const gp_Pnt2d &PLast)
 Sets the UV locations of the extremities of the edge. More...
 
static Standard_Boolean HasContinuity (const TopoDS_Edge &E, const TopoDS_Face &F1, const TopoDS_Face &F2)
 Returns True if the edge is on the surfaces of the two faces. More...
 
static GeomAbs_Shape Continuity (const TopoDS_Edge &E, const TopoDS_Face &F1, const TopoDS_Face &F2)
 Returns the continuity. More...
 
static Standard_Boolean HasContinuity (const TopoDS_Edge &E, const Handle< Geom_Surface > &S1, const Handle< Geom_Surface > &S2, const TopLoc_Location &L1, const TopLoc_Location &L2)
 Returns True if the edge is on the surfaces. More...
 
static GeomAbs_Shape Continuity (const TopoDS_Edge &E, const Handle< Geom_Surface > &S1, const Handle< Geom_Surface > &S2, const TopLoc_Location &L1, const TopLoc_Location &L2)
 Returns the continuity. More...
 
static Standard_Boolean HasContinuity (const TopoDS_Edge &E)
 Returns True if the edge has regularity on some two surfaces. More...
 
static gp_Pnt Pnt (const TopoDS_Vertex &V)
 Returns the 3d point. More...
 
static Standard_Real Tolerance (const TopoDS_Vertex &V)
 Returns the tolerance. More...
 
static Standard_Real Parameter (const TopoDS_Vertex &V, const TopoDS_Edge &E)
 Returns the parameter of <V> on <E>. More...
 
static Standard_Real Parameter (const TopoDS_Vertex &V, const TopoDS_Edge &E, const TopoDS_Face &F)
 Returns the parameters of the vertex on the pcurve of the edge on the face. More...
 
static Standard_Real Parameter (const TopoDS_Vertex &V, const TopoDS_Edge &E, const Handle< Geom_Surface > &S, const TopLoc_Location &L)
 Returns the parameters of the vertex on the pcurve of the edge on the surface. More...
 
static gp_Pnt2d Parameters (const TopoDS_Vertex &V, const TopoDS_Face &F)
 Returns the parameters of the vertex on the face. More...
 
static Standard_Real MaxTolerance (const TopoDS_Shape &theShape, const TopAbs_ShapeEnum theSubShape)
 Returns the maximum tolerance of input shape subshapes. More...
 

Detailed Description

Provides class methods to access to the geometry of BRep shapes.

Member Function Documentation

◆ Continuity() [1/2]

static GeomAbs_Shape BRep_Tool::Continuity ( const TopoDS_Edge E,
const TopoDS_Face F1,
const TopoDS_Face F2 
)
static

Returns the continuity.

◆ Continuity() [2/2]

static GeomAbs_Shape BRep_Tool::Continuity ( const TopoDS_Edge E,
const Handle< Geom_Surface > &  S1,
const Handle< Geom_Surface > &  S2,
const TopLoc_Location L1,
const TopLoc_Location L2 
)
static

Returns the continuity.

◆ Curve() [1/2]

static const Handle< Geom_Curve >& BRep_Tool::Curve ( const TopoDS_Edge E,
TopLoc_Location L,
Standard_Real First,
Standard_Real Last 
)
static

Returns the 3D curve of the edge. May be a Null handle. Returns in <L> the location for the curve. In <First> and <Last> the parameter range.

◆ Curve() [2/2]

static Handle< Geom_Curve > BRep_Tool::Curve ( const TopoDS_Edge E,
Standard_Real First,
Standard_Real Last 
)
static

Returns the 3D curve of the edge. May be a Null handle. In <First> and <Last> the parameter range. It can be a copy if there is a Location.

◆ CurveOnPlane()

static Handle< Geom2d_Curve > BRep_Tool::CurveOnPlane ( const TopoDS_Edge E,
const Handle< Geom_Surface > &  S,
const TopLoc_Location L,
Standard_Real First,
Standard_Real Last 
)
static

For the planar surface builds the 2d curve for the edge by projection of the edge on plane. Returns a NULL handle if the surface is not planar or the projection failed.

◆ CurveOnSurface() [1/4]

static Handle< Geom2d_Curve > BRep_Tool::CurveOnSurface ( const TopoDS_Edge E,
const TopoDS_Face F,
Standard_Real First,
Standard_Real Last,
Standard_Boolean theIsStored = NULL 
)
static

Returns the curve associated to the edge in the parametric space of the face. Returns a NULL handle if this curve does not exist. Returns in <First> and <Last> the parameter range. If the surface is a plane the curve can be not stored but created a new each time. The flag pointed by <theIsStored> serves to indicate storage status. It is valued if the pointer is non-null.

◆ CurveOnSurface() [2/4]

static Handle< Geom2d_Curve > BRep_Tool::CurveOnSurface ( const TopoDS_Edge E,
const Handle< Geom_Surface > &  S,
const TopLoc_Location L,
Standard_Real First,
Standard_Real Last,
Standard_Boolean theIsStored = NULL 
)
static

Returns the curve associated to the edge in the parametric space of the surface. Returns a NULL handle if this curve does not exist. Returns in <First> and <Last> the parameter range. If the surface is a plane the curve can be not stored but created a new each time. The flag pointed by <theIsStored> serves to indicate storage status. It is valued if the pointer is non-null.

◆ CurveOnSurface() [3/4]

static void BRep_Tool::CurveOnSurface ( const TopoDS_Edge E,
Handle< Geom2d_Curve > &  C,
Handle< Geom_Surface > &  S,
TopLoc_Location L,
Standard_Real First,
Standard_Real Last 
)
static

Returns in , <S>, <L> a 2d curve, a surface and a location for the edge <E>. and <S> are null if the edge has no curve on surface. Returns in <First> and <Last> the parameter range.

◆ CurveOnSurface() [4/4]

static void BRep_Tool::CurveOnSurface ( const TopoDS_Edge E,
Handle< Geom2d_Curve > &  C,
Handle< Geom_Surface > &  S,
TopLoc_Location L,
Standard_Real First,
Standard_Real Last,
const Standard_Integer  Index 
)
static

Returns in , <S>, <L> the 2d curve, the surface and the location for the edge <E> of rank <Index>. and <S> are null if the index is out of range. Returns in <First> and <Last> the parameter range.

◆ Degenerated()

static Standard_Boolean BRep_Tool::Degenerated ( const TopoDS_Edge E)
static

Returns True if the edge is degenerated.

◆ HasContinuity() [1/3]

static Standard_Boolean BRep_Tool::HasContinuity ( const TopoDS_Edge E,
const TopoDS_Face F1,
const TopoDS_Face F2 
)
static

Returns True if the edge is on the surfaces of the two faces.

◆ HasContinuity() [2/3]

static Standard_Boolean BRep_Tool::HasContinuity ( const TopoDS_Edge E,
const Handle< Geom_Surface > &  S1,
const Handle< Geom_Surface > &  S2,
const TopLoc_Location L1,
const TopLoc_Location L2 
)
static

Returns True if the edge is on the surfaces.

◆ HasContinuity() [3/3]

static Standard_Boolean BRep_Tool::HasContinuity ( const TopoDS_Edge E)
static

Returns True if the edge has regularity on some two surfaces.

◆ IsClosed() [1/4]

static Standard_Boolean BRep_Tool::IsClosed ( const TopoDS_Shape S)
static

If S is Shell, returns True if it has no free boundaries (edges). If S is Wire, returns True if it has no free ends (vertices). (Internal and External sub-shepes are ignored in these checks) If S is Edge, returns True if its vertices are the same. For other shape types returns S.Closed().

◆ IsClosed() [2/4]

static Standard_Boolean BRep_Tool::IsClosed ( const TopoDS_Edge E,
const TopoDS_Face F 
)
static

Returns True if <E> has two PCurves in the parametric space of <F>. i.e. <F> is on a closed surface and <E> is on the closing curve.

◆ IsClosed() [3/4]

static Standard_Boolean BRep_Tool::IsClosed ( const TopoDS_Edge E,
const Handle< Geom_Surface > &  S,
const TopLoc_Location L 
)
static

Returns True if <E> has two PCurves in the parametric space of <S>. i.e. <S> is a closed surface and <E> is on the closing curve.

◆ IsClosed() [4/4]

static Standard_Boolean BRep_Tool::IsClosed ( const TopoDS_Edge E,
const Handle< Poly_Triangulation > &  T,
const TopLoc_Location L 
)
static

Returns True if <E> has two arrays of indices in the triangulation <T>.

◆ IsGeometric()

static Standard_Boolean BRep_Tool::IsGeometric ( const TopoDS_Edge E)
static

Returns True if <E> is a 3d curve or a curve on surface.

◆ MaxTolerance()

static Standard_Real BRep_Tool::MaxTolerance ( const TopoDS_Shape theShape,
const TopAbs_ShapeEnum  theSubShape 
)
static

Returns the maximum tolerance of input shape subshapes.

◆ NaturalRestriction()

static Standard_Boolean BRep_Tool::NaturalRestriction ( const TopoDS_Face F)
static

Returns the NaturalRestriction flag of the face.

◆ Parameter() [1/3]

static Standard_Real BRep_Tool::Parameter ( const TopoDS_Vertex V,
const TopoDS_Edge E 
)
static

Returns the parameter of <V> on <E>.

◆ Parameter() [2/3]

static Standard_Real BRep_Tool::Parameter ( const TopoDS_Vertex V,
const TopoDS_Edge E,
const TopoDS_Face F 
)
static

Returns the parameters of the vertex on the pcurve of the edge on the face.

◆ Parameter() [3/3]

static Standard_Real BRep_Tool::Parameter ( const TopoDS_Vertex V,
const TopoDS_Edge E,
const Handle< Geom_Surface > &  S,
const TopLoc_Location L 
)
static

Returns the parameters of the vertex on the pcurve of the edge on the surface.

◆ Parameters()

static gp_Pnt2d BRep_Tool::Parameters ( const TopoDS_Vertex V,
const TopoDS_Face F 
)
static

Returns the parameters of the vertex on the face.

◆ Pnt()

static gp_Pnt BRep_Tool::Pnt ( const TopoDS_Vertex V)
static

Returns the 3d point.

◆ Polygon3D()

static const Handle< Poly_Polygon3D >& BRep_Tool::Polygon3D ( const TopoDS_Edge E,
TopLoc_Location L 
)
static

Returns the 3D polygon of the edge. May be a Null handle. Returns in <L> the location for the polygon.

◆ PolygonOnSurface() [1/4]

static Handle< Poly_Polygon2D > BRep_Tool::PolygonOnSurface ( const TopoDS_Edge E,
const TopoDS_Face F 
)
static

Returns the polygon associated to the edge in the parametric space of the face. Returns a NULL handle if this polygon does not exist.

◆ PolygonOnSurface() [2/4]

static Handle< Poly_Polygon2D > BRep_Tool::PolygonOnSurface ( const TopoDS_Edge E,
const Handle< Geom_Surface > &  S,
const TopLoc_Location L 
)
static

Returns the polygon associated to the edge in the parametric space of the surface. Returns a NULL handle if this polygon does not exist.

◆ PolygonOnSurface() [3/4]

static void BRep_Tool::PolygonOnSurface ( const TopoDS_Edge E,
Handle< Poly_Polygon2D > &  C,
Handle< Geom_Surface > &  S,
TopLoc_Location L 
)
static

Returns in , <S>, <L> a 2d curve, a surface and a location for the edge <E>. and <S> are null if the edge has no polygon on surface.

◆ PolygonOnSurface() [4/4]

static void BRep_Tool::PolygonOnSurface ( const TopoDS_Edge E,
Handle< Poly_Polygon2D > &  C,
Handle< Geom_Surface > &  S,
TopLoc_Location L,
const Standard_Integer  Index 
)
static

Returns in , <S>, <L> the 2d curve, the surface and the location for the edge <E> of rank <Index>. and <S> are null if the index is out of range.

◆ PolygonOnTriangulation() [1/3]

static const Handle< Poly_PolygonOnTriangulation >& BRep_Tool::PolygonOnTriangulation ( const TopoDS_Edge E,
const Handle< Poly_Triangulation > &  T,
const TopLoc_Location L 
)
static

Returns the polygon associated to the edge in the parametric space of the face. Returns a NULL handle if this polygon does not exist.

◆ PolygonOnTriangulation() [2/3]

static void BRep_Tool::PolygonOnTriangulation ( const TopoDS_Edge E,
Handle< Poly_PolygonOnTriangulation > &  P,
Handle< Poly_Triangulation > &  T,
TopLoc_Location L 
)
static

Returns in.

, <T>, <L> a polygon on triangulation, a triangulation and a location for the edge <E>.

and <T> are null if the edge has no polygon on triangulation.

◆ PolygonOnTriangulation() [3/3]

static void BRep_Tool::PolygonOnTriangulation ( const TopoDS_Edge E,
Handle< Poly_PolygonOnTriangulation > &  P,
Handle< Poly_Triangulation > &  T,
TopLoc_Location L,
const Standard_Integer  Index 
)
static

Returns in.

, <T>, <L> a polygon on triangulation, a triangulation and a location for the edge <E> for the range index. and <S> are null if the edge has no polygon on triangulation.

◆ Range() [1/3]

static void BRep_Tool::Range ( const TopoDS_Edge E,
Standard_Real First,
Standard_Real Last 
)
static

Gets the range of the 3d curve.

◆ Range() [2/3]

static void BRep_Tool::Range ( const TopoDS_Edge E,
const Handle< Geom_Surface > &  S,
const TopLoc_Location L,
Standard_Real First,
Standard_Real Last 
)
static

Gets the range of the edge on the pcurve on the surface.

◆ Range() [3/3]

static void BRep_Tool::Range ( const TopoDS_Edge E,
const TopoDS_Face F,
Standard_Real First,
Standard_Real Last 
)
static

Gets the range of the edge on the pcurve on the face.

◆ SameParameter()

static Standard_Boolean BRep_Tool::SameParameter ( const TopoDS_Edge E)
static

Returns the SameParameter flag for the edge.

◆ SameRange()

static Standard_Boolean BRep_Tool::SameRange ( const TopoDS_Edge E)
static

Returns the SameRange flag for the edge.

◆ SetUVPoints() [1/2]

static void BRep_Tool::SetUVPoints ( const TopoDS_Edge E,
const Handle< Geom_Surface > &  S,
const TopLoc_Location L,
const gp_Pnt2d PFirst,
const gp_Pnt2d PLast 
)
static

Sets the UV locations of the extremities of the edge.

◆ SetUVPoints() [2/2]

static void BRep_Tool::SetUVPoints ( const TopoDS_Edge E,
const TopoDS_Face F,
const gp_Pnt2d PFirst,
const gp_Pnt2d PLast 
)
static

Sets the UV locations of the extremities of the edge.

◆ Surface() [1/2]

static const Handle< Geom_Surface >& BRep_Tool::Surface ( const TopoDS_Face F,
TopLoc_Location L 
)
static

Returns the geometric surface of the face. Returns in <L> the location for the surface.

◆ Surface() [2/2]

static Handle< Geom_Surface > BRep_Tool::Surface ( const TopoDS_Face F)
static

Returns the geometric surface of the face. It can be a copy if there is a Location.

◆ Tolerance() [1/3]

static Standard_Real BRep_Tool::Tolerance ( const TopoDS_Face F)
static

Returns the tolerance of the face.

◆ Tolerance() [2/3]

static Standard_Real BRep_Tool::Tolerance ( const TopoDS_Edge E)
static

Returns the tolerance for <E>.

◆ Tolerance() [3/3]

static Standard_Real BRep_Tool::Tolerance ( const TopoDS_Vertex V)
static

Returns the tolerance.

◆ Triangulation()

static const Handle< Poly_Triangulation >& BRep_Tool::Triangulation ( const TopoDS_Face F,
TopLoc_Location L 
)
static

Returns the Triangulation of the face. It is a null handle if there is no triangulation.

◆ UVPoints() [1/2]

static void BRep_Tool::UVPoints ( const TopoDS_Edge E,
const Handle< Geom_Surface > &  S,
const TopLoc_Location L,
gp_Pnt2d PFirst,
gp_Pnt2d PLast 
)
static

Gets the UV locations of the extremities of the edge.

◆ UVPoints() [2/2]

static void BRep_Tool::UVPoints ( const TopoDS_Edge E,
const TopoDS_Face F,
gp_Pnt2d PFirst,
gp_Pnt2d PLast 
)
static

Gets the UV locations of the extremities of the edge.


The documentation for this class was generated from the following file: