API class for performing conversion of 3D, 2D curves to bezier curves and surfaces to bezier based surfaces ( bezier surface, surface of revolution based on bezier curve, offset surface based on any previous type). More...

#include <ShapeUpgrade_ShapeConvertToBezier.hxx>

Inheritance diagram for ShapeUpgrade_ShapeConvertToBezier:

[legend]

Public Member Functions
	ShapeUpgrade_ShapeConvertToBezier ()
	Empty constructor.

	ShapeUpgrade_ShapeConvertToBezier (const TopoDS_Shape &S)
	Initialize by a Shape.

void	Set2dConversion (const Standard_Boolean mode)
	Sets mode for conversion 2D curves to bezier.

Standard_Boolean	Get2dConversion () const
	Returns the 2D conversion mode.

void	Set3dConversion (const Standard_Boolean mode)
	Sets mode for conversion 3d curves to bezier.

Standard_Boolean	Get3dConversion () const
	Returns the 3D conversion mode.

void	SetSurfaceConversion (const Standard_Boolean mode)
	Sets mode for conversion surfaces curves to bezier basis.

Standard_Boolean	GetSurfaceConversion () const
	Returns the surface conversion mode.

void	Set3dLineConversion (const Standard_Boolean mode)
	Sets mode for conversion Geom_Line to bezier.

Standard_Boolean	Get3dLineConversion () const
	Returns the Geom_Line conversion mode.

void	Set3dCircleConversion (const Standard_Boolean mode)
	Sets mode for conversion Geom_Circle to bezier.

Standard_Boolean	Get3dCircleConversion () const
	Returns the Geom_Circle conversion mode.

void	Set3dConicConversion (const Standard_Boolean mode)
	Sets mode for conversion Geom_Conic to bezier.

Standard_Boolean	Get3dConicConversion () const
	Returns the Geom_Conic conversion mode.

void	SetPlaneMode (const Standard_Boolean mode)
	Sets mode for conversion Geom_Plane to Bezier.

Standard_Boolean	GetPlaneMode () const
	Returns the Geom_Pline conversion mode.

void	SetRevolutionMode (const Standard_Boolean mode)
	Sets mode for conversion Geom_SurfaceOfRevolution to Bezier.

Standard_Boolean	GetRevolutionMode () const
	Returns the Geom_SurfaceOfRevolution conversion mode.

void	SetExtrusionMode (const Standard_Boolean mode)
	Sets mode for conversion Geom_SurfaceOfLinearExtrusion to Bezier.

Standard_Boolean	GetExtrusionMode () const
	Returns the Geom_SurfaceOfLinearExtrusion conversion mode.

void	SetBSplineMode (const Standard_Boolean mode)
	Sets mode for conversion Geom_BSplineSurface to Bezier.

Standard_Boolean	GetBSplineMode () const
	Returns the Geom_BSplineSurface conversion mode.

virtual Standard_Boolean	Perform (const Standard_Boolean newContext=Standard_True) override
	Performs converting and computes the resulting shape.

Public Member Functions inherited from ShapeUpgrade_ShapeDivide
	ShapeUpgrade_ShapeDivide ()

	ShapeUpgrade_ShapeDivide (const TopoDS_Shape &S)
	Initialize by a Shape.

void	Init (const TopoDS_Shape &S)
	Initialize by a Shape.

virtual	~ShapeUpgrade_ShapeDivide ()

void	SetPrecision (const Standard_Real Prec)
	Defines the spatial precision used for splitting.

void	SetMaxTolerance (const Standard_Real maxtol)
	Sets maximal allowed tolerance.

void	SetMinTolerance (const Standard_Real mintol)
	Sets minimal allowed tolerance.

void	SetSurfaceSegmentMode (const Standard_Boolean Segment)
	Purpose sets mode for trimming (segment) surface by wire UV bounds.

TopoDS_Shape	Result () const
	Gives the resulting Shape, or Null shape if not done.

Handle< ShapeBuild_ReShape >	GetContext () const
	Returns context with all the modifications made during last call(s) to Perform() recorded.

void	SetContext (const Handle< ShapeBuild_ReShape > &context)
	Sets context with recorded modifications to be applied during next call(s) to Perform(shape,Standard_False)

virtual void	SetMsgRegistrator (const Handle< ShapeExtend_BasicMsgRegistrator > &msgreg)
	Sets message registrator.

Handle< ShapeExtend_BasicMsgRegistrator >	MsgRegistrator () const
	Returns message registrator.

void	SendMsg (const TopoDS_Shape &shape, const Message_Msg &message, const Message_Gravity gravity=Message_Info) const
	Sends a message to be attached to the shape. Calls corresponding message of message registrator.

Standard_Boolean	Status (const ShapeExtend_Status status) const
	Queries the status of last call to Perform OK : no splitting was done (or no call to Perform) DONE1: some edges were split DONE2: surface was split FAIL1: some errors occurred.

void	SetSplitFaceTool (const Handle< ShapeUpgrade_FaceDivide > &splitFaceTool)
	Sets the tool for splitting faces.

void	SetEdgeMode (const Standard_Integer aEdgeMode)
	Sets mode for splitting 3d curves from edges. 0 - only curve 3d from free edges. 1 - only curve 3d from shared edges. 2 - all curve 3d.

Protected Member Functions
virtual Handle< ShapeUpgrade_FaceDivide >	GetSplitFaceTool () const override
	Returns the tool for dividing faces.

virtual Message_Msg	GetFaceMsg () const override

virtual Message_Msg	GetWireMsg () const override

virtual Message_Msg	GetEdgeMsg () const override
	Returns a message describing modification of a shape.

Protected Member Functions inherited from ShapeUpgrade_ShapeDivide

Additional Inherited Members
Protected Attributes inherited from ShapeUpgrade_ShapeDivide
Handle< ShapeBuild_ReShape >	myContext

Handle< ShapeExtend_BasicMsgRegistrator >	myMsgReg

TopoDS_Shape	myShape

TopoDS_Shape	myResult

Standard_Real	myPrecision

Standard_Real	myMinTol

Standard_Real	myMaxTol

Standard_Boolean	mySegmentMode

Standard_Integer	myStatus

Standard_Integer	myEdgeMode

Detailed Description

API class for performing conversion of 3D, 2D curves to bezier curves and surfaces to bezier based surfaces ( bezier surface, surface of revolution based on bezier curve, offset surface based on any previous type).

Constructor & Destructor Documentation

◆ ShapeUpgrade_ShapeConvertToBezier() [1/2]

ShapeUpgrade_ShapeConvertToBezier::ShapeUpgrade_ShapeConvertToBezier ( )

Empty constructor.

◆ ShapeUpgrade_ShapeConvertToBezier() [2/2]

ShapeUpgrade_ShapeConvertToBezier::ShapeUpgrade_ShapeConvertToBezier ( const TopoDS_Shape & S )

Initialize by a Shape.

Member Function Documentation

◆ Get2dConversion()

Standard_Boolean ShapeUpgrade_ShapeConvertToBezier::Get2dConversion ( ) const

Returns the 2D conversion mode.

◆ Get3dCircleConversion()

Standard_Boolean ShapeUpgrade_ShapeConvertToBezier::Get3dCircleConversion ( ) const

Returns the Geom_Circle conversion mode.

◆ Get3dConicConversion()

Standard_Boolean ShapeUpgrade_ShapeConvertToBezier::Get3dConicConversion ( ) const

Returns the Geom_Conic conversion mode.

◆ Get3dConversion()

Standard_Boolean ShapeUpgrade_ShapeConvertToBezier::Get3dConversion ( ) const

Returns the 3D conversion mode.

◆ Get3dLineConversion()

Standard_Boolean ShapeUpgrade_ShapeConvertToBezier::Get3dLineConversion ( ) const

Returns the Geom_Line conversion mode.

◆ GetBSplineMode()

Standard_Boolean ShapeUpgrade_ShapeConvertToBezier::GetBSplineMode ( ) const

Returns the Geom_BSplineSurface conversion mode.

◆ GetEdgeMsg()

virtual Message_Msg ShapeUpgrade_ShapeConvertToBezier::GetEdgeMsg ( ) const

overrideprotectedvirtual

Returns a message describing modification of a shape.

Reimplemented from ShapeUpgrade_ShapeDivide.

◆ GetExtrusionMode()

Standard_Boolean ShapeUpgrade_ShapeConvertToBezier::GetExtrusionMode ( ) const

Returns the Geom_SurfaceOfLinearExtrusion conversion mode.

◆ GetFaceMsg()

virtual Message_Msg ShapeUpgrade_ShapeConvertToBezier::GetFaceMsg ( ) const

overrideprotectedvirtual

Reimplemented from ShapeUpgrade_ShapeDivide.

◆ GetPlaneMode()

Standard_Boolean ShapeUpgrade_ShapeConvertToBezier::GetPlaneMode ( ) const

Returns the Geom_Pline conversion mode.

◆ GetRevolutionMode()

Standard_Boolean ShapeUpgrade_ShapeConvertToBezier::GetRevolutionMode ( ) const

Returns the Geom_SurfaceOfRevolution conversion mode.

◆ GetSplitFaceTool()

virtual Handle< ShapeUpgrade_FaceDivide > ShapeUpgrade_ShapeConvertToBezier::GetSplitFaceTool ( ) const

overrideprotectedvirtual

Returns the tool for dividing faces.

Reimplemented from ShapeUpgrade_ShapeDivide.

◆ GetSurfaceConversion()

Standard_Boolean ShapeUpgrade_ShapeConvertToBezier::GetSurfaceConversion ( ) const

Returns the surface conversion mode.

◆ GetWireMsg()

virtual Message_Msg ShapeUpgrade_ShapeConvertToBezier::GetWireMsg ( ) const

overrideprotectedvirtual

Reimplemented from ShapeUpgrade_ShapeDivide.

◆ Perform()

virtual Standard_Boolean ShapeUpgrade_ShapeConvertToBezier::Perform ( const Standard_Boolean newContext = Standard_True )

overridevirtual

Performs converting and computes the resulting shape.

Reimplemented from ShapeUpgrade_ShapeDivide.

◆ Set2dConversion()

void ShapeUpgrade_ShapeConvertToBezier::Set2dConversion ( const Standard_Boolean mode )

Sets mode for conversion 2D curves to bezier.

◆ Set3dCircleConversion()

void ShapeUpgrade_ShapeConvertToBezier::Set3dCircleConversion ( const Standard_Boolean mode )

Sets mode for conversion Geom_Circle to bezier.

◆ Set3dConicConversion()

void ShapeUpgrade_ShapeConvertToBezier::Set3dConicConversion ( const Standard_Boolean mode )

Sets mode for conversion Geom_Conic to bezier.

◆ Set3dConversion()

void ShapeUpgrade_ShapeConvertToBezier::Set3dConversion ( const Standard_Boolean mode )

Sets mode for conversion 3d curves to bezier.

◆ Set3dLineConversion()

void ShapeUpgrade_ShapeConvertToBezier::Set3dLineConversion ( const Standard_Boolean mode )

Sets mode for conversion Geom_Line to bezier.

◆ SetBSplineMode()

void ShapeUpgrade_ShapeConvertToBezier::SetBSplineMode ( const Standard_Boolean mode )

Sets mode for conversion Geom_BSplineSurface to Bezier.

◆ SetExtrusionMode()

void ShapeUpgrade_ShapeConvertToBezier::SetExtrusionMode ( const Standard_Boolean mode )

Sets mode for conversion Geom_SurfaceOfLinearExtrusion to Bezier.

◆ SetPlaneMode()

void ShapeUpgrade_ShapeConvertToBezier::SetPlaneMode ( const Standard_Boolean mode )

Sets mode for conversion Geom_Plane to Bezier.

◆ SetRevolutionMode()

void ShapeUpgrade_ShapeConvertToBezier::SetRevolutionMode ( const Standard_Boolean mode )

Sets mode for conversion Geom_SurfaceOfRevolution to Bezier.

◆ SetSurfaceConversion()

void ShapeUpgrade_ShapeConvertToBezier::SetSurfaceConversion ( const Standard_Boolean mode )

Sets mode for conversion surfaces curves to bezier basis.

The documentation for this class was generated from the following file:

ShapeUpgrade_ShapeConvertToBezier.hxx

Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ShapeUpgrade_ShapeConvertToBezier() [1/2]

◆ ShapeUpgrade_ShapeConvertToBezier() [2/2]

Member Function Documentation

◆ Get2dConversion()

◆ Get3dCircleConversion()

◆ Get3dConicConversion()

◆ Get3dConversion()

◆ Get3dLineConversion()

◆ GetBSplineMode()

◆ GetEdgeMsg()

◆ GetExtrusionMode()

◆ GetFaceMsg()

◆ GetPlaneMode()

◆ GetRevolutionMode()

◆ GetSplitFaceTool()

◆ GetSurfaceConversion()

◆ GetWireMsg()

◆ Perform()

◆ Set2dConversion()

◆ Set3dCircleConversion()

◆ Set3dConicConversion()

◆ Set3dConversion()

◆ Set3dLineConversion()

◆ SetBSplineMode()

◆ SetExtrusionMode()

◆ SetPlaneMode()

◆ SetRevolutionMode()

◆ SetSurfaceConversion()