#include <BRepBuilderAPI_FastSewing.hxx>

Inheritance diagram for BRepBuilderAPI_FastSewing:

Data Structures
class	FS_Edge
	The struct corresponding to a edge. More...

struct	FS_Face
	The struct corresponding to an face. More...

struct	FS_Vertex
	The struct corresponding to a vertex. More...

class	NodeInspector
	This inspector will find a node nearest to the given point not far than on the given tolerance. More...

Public Types
enum	FS_Statuses { FS_OK = 0x00000000 , FS_Degenerated = 0x00000001 , FS_FindVertexError = 0x00000002 , FS_FindEdgeError = 0x00000004 , FS_FaceWithNullSurface = 0x00000008 , FS_NotNaturalBoundsFace = 0x00000010 , FS_InfiniteSurface = 0x00000020 , FS_EmptyInput = 0x00000040 , FS_Exception = 0x00000080 }
	Enumeration of result statuses. More...

typedef unsigned int	FS_VARStatuses

Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object.

Public Member Functions
	BRepBuilderAPI_FastSewing (const Standard_Real theTolerance=1.0e-06)
	Creates an object with tolerance of connexity.

Standard_Boolean	Add (const TopoDS_Shape &theShape)
	Adds faces of a shape.

Standard_Boolean	Add (const Handle< Geom_Surface > &theSurface)
	Adds a surface.

void	Perform (void)
	Compute resulted shape.

void	SetTolerance (const Standard_Real theToler)
	Sets tolerance.

Standard_Real	GetTolerance () const
	Returns tolerance.

const TopoDS_Shape &	GetResult () const
	Returns resulted shape.

FS_VARStatuses	GetStatuses (Standard_OStream *const theOS=0)
	Returns list of statuses. Print message if theOS != 0.

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.

virtual	~Standard_Transient ()
	Destructor must be virtual.

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName.

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.

Standard_Integer	GetRefCount () const noexcept
	Get the reference counter of this object.

void	IncrementRefCounter () noexcept
	Increments the reference counter of this object.

Standard_Integer	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value.

virtual void	Delete () const
	Memory deallocator for transient classes.

Protected Member Functions
void	FindVertexes (const Standard_Integer theSurfID, NCollection_CellFilter< NodeInspector > &theCells)

void	FindEdges (const Standard_Integer theSurfID)

void	UpdateEdgeInfo (const Standard_Integer theIDPrevVertex, const Standard_Integer theIDCurrVertex, const Standard_Integer theFaceID, const Standard_Integer theIDCurvOnFace)

void	CreateNewEdge (const Standard_Integer theIDPrevVertex, const Standard_Integer theIDCurrVertex, const Standard_Integer theFaceID, const Standard_Integer theIDCurvOnFace)

Standard_Real	Compute3DRange ()

FS_VARStatuses	SetStatus (FS_Statuses theStatus)
	Sets status. Returns numeric value of the status set.

Additional Inherited Members
Static Public Member Functions inherited from Standard_Transient
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Detailed Description

This file is part of Open CASCADE Technology software library.

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License version 2.1 as published by the Free Software Foundation, with special exception defined in the file OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT distribution for complete text of the license and disclaimer of any warranty.

Alternatively, this file may be used under the terms of Open CASCADE commercial license or contractual agreement. This class performs fast sewing of surfaces (faces). It supposes that all surfaces are finite and are naturally restricted by their bounds. Moreover, it supposes that stitched together surfaces have the same parameterization along common boundaries, therefore it does not perform time-consuming check for SameParameter property of edges.

For sewing, use this function as following:

set tolerance value (default tolerance is 1.E-06)
add all necessary surfaces (faces)
check status if adding is correctly completed.
compute -> Perform
retrieve the error status if any
retrieve the resulted shape

Member Typedef Documentation

◆ FS_VARStatuses

unsigned int BRepBuilderAPI_FastSewing::FS_VARStatuses

Member Enumeration Documentation

◆ FS_Statuses

enum BRepBuilderAPI_FastSewing::FS_Statuses

Enumeration of result statuses.

Enumerator
FS_OK
FS_Degenerated
FS_FindVertexError
FS_FindEdgeError
FS_FaceWithNullSurface
FS_NotNaturalBoundsFace
FS_InfiniteSurface
FS_EmptyInput
FS_Exception

Constructor & Destructor Documentation

◆ BRepBuilderAPI_FastSewing()

BRepBuilderAPI_FastSewing::BRepBuilderAPI_FastSewing ( const Standard_Real theTolerance = 1.0e-06 )

Creates an object with tolerance of connexity.

Member Function Documentation

◆ Add() [1/2]

Standard_Boolean BRepBuilderAPI_FastSewing::Add ( const Handle< Geom_Surface > & theSurface )

Adds a surface.

◆ Add() [2/2]

Standard_Boolean BRepBuilderAPI_FastSewing::Add ( const TopoDS_Shape & theShape )

Adds faces of a shape.

◆ Compute3DRange()

Standard_Real BRepBuilderAPI_FastSewing::Compute3DRange ( )

protected

◆ CreateNewEdge()

void BRepBuilderAPI_FastSewing::CreateNewEdge	(	const Standard_Integer	theIDPrevVertex,
		const Standard_Integer	theIDCurrVertex,
		const Standard_Integer	theFaceID,
		const Standard_Integer	theIDCurvOnFace )

protected

◆ FindEdges()

void BRepBuilderAPI_FastSewing::FindEdges ( const Standard_Integer theSurfID )

protected

◆ FindVertexes()

void BRepBuilderAPI_FastSewing::FindVertexes	(	const Standard_Integer	theSurfID,
		NCollection_CellFilter< NodeInspector > &	theCells )

protected

◆ GetResult()

const TopoDS_Shape & BRepBuilderAPI_FastSewing::GetResult ( ) const

inline

Returns resulted shape.

◆ GetStatuses()

FS_VARStatuses BRepBuilderAPI_FastSewing::GetStatuses ( Standard_OStream *const theOS = 0 )

Returns list of statuses. Print message if theOS != 0.

◆ GetTolerance()

Standard_Real BRepBuilderAPI_FastSewing::GetTolerance ( ) const

inline

Returns tolerance.

◆ Perform()

void BRepBuilderAPI_FastSewing::Perform ( void )

Compute resulted shape.

◆ SetStatus()

FS_VARStatuses BRepBuilderAPI_FastSewing::SetStatus ( FS_Statuses theStatus )

inlineprotected

Sets status. Returns numeric value of the status set.

◆ SetTolerance()

void BRepBuilderAPI_FastSewing::SetTolerance ( const Standard_Real theToler )

inline

Sets tolerance.

◆ UpdateEdgeInfo()

void BRepBuilderAPI_FastSewing::UpdateEdgeInfo	(	const Standard_Integer	theIDPrevVertex,
		const Standard_Integer	theIDCurrVertex,
		const Standard_Integer	theFaceID,
		const Standard_Integer	theIDCurvOnFace )

protected

The documentation for this class was generated from the following file:

BRepBuilderAPI_FastSewing.hxx

Data Structures

Public Types

Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Member Typedef Documentation

◆ FS_VARStatuses

Member Enumeration Documentation

◆ FS_Statuses

Constructor & Destructor Documentation

◆ BRepBuilderAPI_FastSewing()

Member Function Documentation

◆ Add() [1/2]

◆ Add() [2/2]

◆ Compute3DRange()

◆ CreateNewEdge()

◆ FindEdges()

◆ FindVertexes()

◆ GetResult()

◆ GetStatuses()

◆ GetTolerance()

◆ Perform()

◆ SetStatus()

◆ SetTolerance()

◆ UpdateEdgeInfo()